Manual - Gefen
Contents
1. which are expressly disclaimed 1 Proof of sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site Contacting Gefen Technical Support Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Email support gefen com Visit us on the Web www gefen com Technical Support Hours 8 00 AM to 5 00 PM Monday Friday Pacific Time DisplayPort Extender over 2 LC Fibers is a trademar2. 2 LED indicator status Category Core size cladding diameter Top Off O The Sender module is not powered The Receiver module is not powered Flashes 3 The Sender and Receiver module are times and powered but are not connected using turns off fiber optic cable Flashing The Sender and Receiver modules are powered and connected to one another using LC terminated fiber optic cables Bottom Solid blue O The display is connected to the Receiver module Off O The display has been disconnected from the Receiver module page 7 02 Appendix SDEecHicalons EE 10 Specifications Appendix Resolution max e WQUXGA 2560 x 1600 60Hz Video bandwidth 10 8 Gb s 2 7 Gb s per lane 4 lanes Video Input Connector Sender Video Output Connector Receiver Link Connector Sender Receiver Power Supply Sender Receiver Power Consumption Sender Receiver Optical Power Budget Operating Temperature Storage Temperature Operating Humidity Storage Humidity Dimensions W x H x D Unit Weight each 1 x DisplayPort 20 pin female 1 x DisplayPort 20 pin female 2 x LC type 5V DC 2 1W max each 9 4 dB 32 to 122 F 0 to 50 C 22 to 158 F 30 to 70 C 10 to 85 RH non condensing 5 to 90 RH non condensing 1 4 x 0 6 x 2 8 35mm x 16mm x 72mm 0 1 Ib 0 05 kg page 10 Stretch it Switch it Split it Gefen s got it
3. Compact Sender and Receiver modules and female DisplayPort connectors provide clean easy installation FCC and CE compliant for RFI radio frequency interference and EMI electromagnetic immunity Packing List The DisplayPort Extender over 2 LC Fibers ships with the items listed below If any of these items are not present in your box when you first open it immediately contact your dealer or Gefen 1 DisplayPort Extender over 2 LC Fibers Sender module 1 DisplayPort Extender over 2 LC Fibers Receiver module 2 DisplayPort cables M M 2 USB to DisplayPort cables M M 2 5V 1A DC power supply 1 Quick Start Guide e QQ YY Xa er vi DisplayPort Extender over 2 LC Fibers Table of Contents 01 Getting Started MOS La OU arar ass 2 Sender WICC MENTRE OTT 2 Receiver Mod le euere mm m TT 4 stall A o o A 6 Connecting the DisplayPort Extender over 2 LC Fibers 6 Sample Wining Diagramm ea iia 6 02 Appendix Specifications assistance ae een 10 viii 01 Getting Started ee 2 Sender Receiver Module 2 at de eee EEE 4 Connecting the DisplayPort Extender over 2 LC Fibers 4 Sample Tele tel ET Tele LE 6 Module Layout Sender Module Top Back Front 9 O Bottom page 2 Getting Started 1 Power indicator 2 Power receptacle 3 DisplayPort connector 4 LC connectors 5 Status indicator Module Layout This LED indicates t
4. 20600 Nordhoff St Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefen com support gefen com TOM PR PR C
5. DisplayPort Extender over 2 LC Fibers SD SS SAO User Manual Release A2 DisplayPort Extender over 2 LC Fibers Important Safety Instructions GENERAL SAFETY INFORMATION 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this product near water 6 Clean only with a dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install or place this product near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 To reduce the risk of electric shock and or damage to this product never handle or touch this unit or power cord if your hands are wet or damp Do not expose this product to rain or moisture 13 Unplug this apparatus
6. during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 Batteries that may be included with this product and or accessories should never be exposed to open flame or excessive heat Always dispose of used batteries according to the instructions DisplayPort Extender over 2 LC Fibers Warranty Information Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of
7. he power status of the Sender module See Connecting the DisplayPort Extender over 2 LC Fibers for more information Connect the included 5V DC power supply to this power receptacle Use a DisplayPort cable to connect the source to this connector Connect two strands of LC terminated fiber optic cable from these ports to the associated ports on the Receiver module See Connecting the DisplayPort Extender over 2 LC Fibers for important information on connecting fiber optic cables This LED indicates the connection status of the Sender module See Connecting the DisplayPort Extender over 2 LC Fibers for more information on connecting fiber optic cables page 3 Getting Started Module Layout Receiver Module Top Back Front Bottom en page 4 Getting Started 1 Power indicator 2 Power receptacle 3 DisplayPort connector 4 LC connectors 5 Status indicator Module Layout This LED indicates the power status of the Receiver module See Connecting the DisplayPort Extender over 2 LC Fibers for more information Connect the included 5V DC power supply to this power receptacle Use a DisplayPort cable to connect the display to this connector Connect two strands of LC terminated fiber optic cable from these ports to the associated ports on the Sender module See Connecting the DisplayPort Extender over 2 LC Fibers for important information on connecting fiber optic cable
8. k of Gefen LLC Important Notice Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice 2013 Gefen LLC All Rights Reserved All trademarks are the property of their respective owners IV Operating Notes Fiber optic cables must be treated carefully when connectors are exposed They are susceptible to dust which can cause pixel loss The DisplayPort Extender over 2 LC Fibers works for all DisplayPort displays and supports resolution up to WQXGA 2560 x 1600 60Hz Extension distance will depend upon the type of fiber optic cable that is used gt Up to 1000 feet 300 meters when using LC terminated OM2 OM3 fiber gt Up to 500 feet 150 meters when using LC terminated OM1 fiber HDCP and DPCP compliant Features and Packing List Features Extends DisplayPort up to 1000 feet 300 meters over 2 strands of 50 125um multi mode OM2 OM3 LC terminated fiber optic cable Extends DisplayPort up to 500 feet 150 meters over 2 strands of 62 5 125um multi mode OM1 LC terminated fiber optic cable Supports 1080p Full HD at 120Hz and dual link resolutions up to 2560 x 1600 WQXGA e Compliant with DisplayPort 1 1a standard Supports Dual Mode DisplayPort DP Supports auxiliary I C channel over fiber Fiber optic transmission eliminates susceptibility to electromagnetic interference EMI HDCP and DPCP compliant
9. s This LED indicates the connection status of the Receiver module See Connecting the DisplayPort Extender over 2 LC Fibers for more information on connecting fiber optic cables page 5 Installation Connecting the DisplayPort Extender over 2 LC Fibers 1 Connect a DisplayPort cable from the source to the DisplayPort connector on the Sender module 2 Connect a DisplayPort cable from the display to the DisplayPort connector on the Receiver module 3 Connect 2 strands of LC terminated multimode fiber optic cable from the Sender module to the Receiver module See the Table 2 1 on the next page for distance information based on the type of fiber optic cable IMPORTANT Each fiber optic port is identified by the letter A or B Make sure that the fiber optic cables between the Sender and Receiver module are connected to the proper port as shown below 4 Connect the included 5V DC power supplies to the power receptacles on both the Sender and Receiver module The LED on the top of both the Sender and Receiver module will flash slowly 3 times then flash quickly as long as power is applied See Table 2 2 on the next page for details on LED status Sample Wiring Diagram DISPLAYPORT CABLE FIBER OPTIC CABIE Computer Sender HD Display EXT DP CP 2F0 page 6 Getting Started Installation Table 2 1 Fiber optic cable distance OM2 OM3 50um 125um OM1 62 5um 125um Table 2
Download Pdf Manuals
Related Search