User Manual
Contents
1. 4 1 PORT USB 2 0 PCI Express Card User Manual Features and Benefits Compliant with PCI Express Specification 1 0a Provide four 4 external Type A USB 2 0 480Mbps and one internal Type A USB 2 0 480Mbps ports into your system Hot swapping feature allows you to connect disconnect devices without first turning system off Compliant with USB specification rev 2 0 Supports high speed 480Mbps full speed 12Mbps and low speed 1 5Mbps data transfer modes for simultaneous operation of multiple USB 2 0 1 1 devices Works with a various type of USB devices including hubs removable drives digital cameras scanner CD RWs DVD ROMs PC video cameras printers and more Note USB 1 1 devices are limited to USB 1 1 speeds even when they are connected to USB 2 0 host adapter or USB 2 0 hubs System Requirements Windows 7 Vista XP 2000 PCI Express enabled system with an available PCI Express slot Page 2 Hardware Description USB 2 0 Port External USB 2 0 Port Internal 4 Pin Power Connector Hardware Installation l 2 3 4 Turn Off the power to your computer Unplug the power cord and remove your computer s cover Remove the slot bracket from an available PCIe slot To install the card carefully align the card s bus connector with the selected PCIe slot on the motherboard Push the board down Page 3 firmly 5 Connect the system power source to the board s power connec2. tor 6 Replace the slot bracket s holding screw to secure the card 7 Replace the computer cover and reconnect the power cord Driver Installation Important If your system doesn t boot to Windows properly with our card installed check with your system s manufacturer for the latest system firmware update For Windows XP 2000 Windows XP 2000 will automatically detect and install the correct driver for the PCIe USB 2 0 4 1 Ports However please ensure you have the latest Service Pack Installed For Windows XP Windows XP Service Pack 1 or later For Windows 2000 Windows 2000 Service Pack 4 or later For Windows Server 2003 Vista Page 4 Windows Server 2003 Vista has built in driver support for this controller Just install the board and Windows will automatically detect and install the correct drivers for it No additional driver is necessary To Verify Windows Installation 1 Right click My Computer then click Manage Click Device Manager 2 Double click Universal Serial Bus controllers option NEC PCI to USB Open Host Controller NEC PCI to USB Open Host Controller Standard Enhanced PCI to USB Host Controller USB 2 0 Root Hub USB Root Hub in Windows XP Server 2003 and Vista USB Root Hub USB Root Hub Page 5
Download Pdf Manuals
Related Search