CULINAIRE CHIP DUMP
Contents
1. INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD General Recommendations Important Information Carefully read this instruction booklet as it contains important advice for safe installation operation and maintenance Keep this booklet on hand in a safe place for future reference by other operators or service technicians All persons operating this chip dump MUST read the operation section of this manual and be instructed by trained personal on the correct use of the chip dump If additional user manuals are needed talk to your distributor or visit the Culinaire website Qualified personnel specifically trained in the following instructions can perform installation and service of the machine Disclaimer The manufacturer and distributor cannot be held responsible or liable for any injuries or damages of any kind occurred to persons appliances or others due to abuse and misuse of this appliance in regards to installation un installation operation servicing or maintenance or lack of conformity with the instructions indicated in this documentation All appliances made by the manufacturer are delivered assembled where possible and ready to install Any installation un installation servicing maintenance and access or removal of any parts panels or safety barriers that is not permitted does not comply in accordance to this documentation or not performed by a TRAI NED AND AUTHORISED SPECIALISTS wil2. Australian Warranty Policy amp Procedure Stoddart is committed to providing a comprehensive and fair warranty for all of its equipment The warranty incorporates a commercial manufacturers warranty together with the consumer warranty provisions of the National Consumer Protection Act 2009 1 Commercial Warranty 1 1 Stoddart warrants to the original purchaser Customer of equipment manufactured or distributed by Stoddart that for 12 months from the date of installation of the equipment by Customer the Warranty Period any defect in workmanship or material will subject to clauses 1 2 and 3 be i Repaired without charge or ii In respect of any Major Failure which cannot be repaired replaced or the purchase money refunded 1 2 Stoddart will not be liable for any associated loss damage or compensation claim resulting from any defect in workmanship or material and such liability is expressly excluded from the operation of clause 1 1 2 Consumer Warranty 2 1 Subject to clause 3 equipment supplied by Stoddart to Customer for personal domestic or household use or consumption comes with guarantees that cannot be excluded under the Australian Consumer Law Customer is entitled to a replacement or refund for a Major Failure and compensation for any other reasonably foreseeable loss or damage Customer is entitled to have the equipment repaired or replaced if the equipment fails to be of an Acceptable Quality and that failure doe
3. WARRANTY REQUEST FORM Ferrara AA FOOD SERVICE EQUIPMENT Phone 07 3440 7600 Int 617 3440 7600 Phone 1300 307 289 Fax 07 3344 6166 Int 617 3344 6166 Email service stoddart com au To ensure we can provide the best possible service we require you to complete this form Make model and serial number along with other essential information To secure a call you must also have an account with Stoddart or complete the credit card details below THIS FORM MUST BE COMPLETED OR WARRANTY CANNOT BE PROCESSED Name of contact person on site Date Business Organisation name Street Address Suburb State Post Code Phone Site Mob Equipment Type Brand Model PNC no Serial no Location large sites only Open Close Date of purchase Company purchased from please provide a copy of your tax invoice or delivery docket as proof of purchase Description of fault Has the following been checked tick box if appropriate and checked Electrical power supply O Gas O Water Supply O Name of person requesting warranty please print CREDIT CARD DETAILS Required as security against chargeable work see note below Card type Visa O Mastercard O Cardholder name Card no Signature Expiry Date PLEASE NOTE Warranty call outs take place Mondays to Fridays between 8 00 and 16 30 except public holidays Any c
4. AUTHORISATION NUMBER and details of work to be carried out by a Stoddart authorised service agent This authorisation number MUST be obtained before any work is carried out Stoddart will not accept invoices for work carried out without an official authorisation number or by an unauthorised service agent 4 7 Customer must quote the official authorisation number on all correspondence and invoices relating to a warranty claim to ensure prompt processing by Stoddart 4 8 Customer must pay all costs associated with a call out for work that is not related to warranty repairs or outside Stoddart s Terms immediately 5 Timing of Warranty Services 5 1 Stoddart will comply with its warranty liabilities contained in these Terms in a timely manner 6 General Maintenance and Repairs 6 1 The equipment must be repaired and maintained by a qualified technician Stoddart s authorised service agents are experienced technicians who understand the equipment and carry commonly used spare parts Contact Stoddart s national service number listed below for details of your nearest Stoddart authorised service agent For Warranty maintenance spare parts and repairs contact Tel 1300 307 289 Fax 07 3344 6166 email service stoddart com au Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 13
5. a constant temperature with two 500 watt infra heat lamps above the product The 100mm deep curved perforated crumb tray aids serving and helps to aerate the product The Culinaire Chip dump is designed to be easy to operate and maintain whilst attention to detail is focused on providing optimum hygiene and safety Product Overview Configuration may vary according to model Removable pan with perforated crumb tray Cupboard Under Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 3 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD Technical Code Explanation Code Explanation CH Culinaire Heated FCD Fryer Chip dump Technical Specification SPECI FI CATIONS Model CD SSM T1 d 550 Height 1345mm Width 400mm Depth 787mm SHI PPI NG Height 1350mm Width 500mm Depth 900mm Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 4 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD Technical Diagram lt 400 S Plan View Due to continuous product research and developmen
6. accident use of inappropriate chemicals flooding fire or act of God iii Any consequential loss damage or expense arising directly or indirectly from use of the equipment otherwise than in accordance with the Instructions iv Any damage or malfunction arising from or relating to Customer s failure to properly maintain or clean the equipment in accordance with the Instructions v Damage caused to equipment during transportation which is outside Stoddart s standard delivery conditions vi Breakage or replacement of lamps fluorescent tubes light bulbs glass silicone seals gaskets and plastic components vii Maintenance repair or other works not undertaken by a Stoddart authorised service agent viii Where remote refrigeration is connected by a person other than Stoddart to equipment produced by Stoddart Stoddart cannot accept claims for repair of TX valves and control components as the fault may arise from the installation of the remote refrigeration lines equipment and gas by a party over which Stoddart has no control ix Transportation costs associated with transporting the equipment to a Stoddart authorized service agent where Stoddart considers acting reasonably that repairs cannot be undertaken on site and x Unless agreed to by Stoddart in writing to the contrary warranty is not included in the sale price for goods sold to or installed in an overseas location 4 Warranty Claim Procedure 4 1 The following proce
7. and perforated crumb tray are fitted correctly e Switch heat lamps on via toggle switch Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 8 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD Cleaning Schedules e The unit should be cleaned at the end of the EVERY WORK DAY Information e Cleaning is recommended for health and safety purposes and to prolong the life of the unit e All liquids on or around the unit MUST be cleaned up straight away e All items including the strainer tray MUST be removed from the unit before cleaning e Move unit over floor waste and drain the unit by opening the valve e Do NOT use abrasive pads or cleaners on the stainless steel or any other metal parts of the unit e Do NOT use industrial chemical cleaners or caustic based cleaners many will damage the metals and plastics used on this unit e When drying metal surfaces should be wiped with a soft cloth in the same direction as grained polish e Do NOT remove any screw for cleaning All internal sections of the unit are to be cleaned by a qualified technician e For maintenance of stainless stain surfaces check the maintenance guide for more information Heat Lamp Assembly e The heat lamp assemble can be removed to for cleaning e Unplug from power source a
8. INSTALLATION OPERATION MAINTENANCE Culinaire Chip Dump CH CD CULI NAI RE CHIP DUMP Models CH CD v Grade 304 Stainless Steel Construction in No 4 Satin Finish 2 x 500w IR heat lamps 100mm deep tray with perforated insert Storage under SON AN Manufactured by Tom Stoddart Pty Ltd 39 Faisal Hatia Way Karawatha QLD 4117 Ph 07 3440 7600 int 61 7 3440 7600 Fax 07 3345 6403 int 61 7 3345 6403 Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD Table of Contents General Recommendations sana dd EEEE EEEO 2 Important foma a ada 2 General Ste canina a a al dt ees 2 SOI rado 2 Sharp Edge Suainis atrial ill dali 2 Specificati NS rra io rca 3 A E PO O o hate utaantaeds twang leanannedsetrs 3 Product OVA cenhonnctnat cues thus AAEREN aaRS 3 A idl akendteae aed Ueiiinlah Aten A Aa 4 Code Explanation sristi rii aeiiaaie rr non nn non rr AA A a ener rene anna tenes 4 Technical Specihication nanii a A Ea a 4 Technical Diagram r a a a e E 5 ostalat ias A A A A 6 General PreCaUtlON ura a i 6 Setting UPiusiiiiniaa ad 6 Handling aere aaaeei and sates dds ehe aa AE A A E Ea A AAA AR 6 SItePreparatOM asirio 6 Unpack Iii rada 6 Position aio 6 Assembly ii a a 6 A
9. alls outside these times will be subject to penalty rates Certain items such as glass components and light fittings are not covered under warranty Claims for non covered parts no faults found travel over 50km or other items outside our standard terms and conditions will be chargeable Any chargeable items will be COD terms payable onsite CREDIT CARD I NFORMATI ON MUST BE PROVI DED AS SECURITY AGAINST FALSE WARRANTY CALL OUTS FAI LURE TO DO SO WILL RESULT I N REQUEST BEI NG UNATTENDED NORMAL BUSI NESS HOURS ARE 8AM 4 30PM MONDAY TO FRI DAY
10. an lead to rust and further damage to the product Corrosion Protection e Stainless steel exhibits good resistance to corrosion however if not properly maintained stainless steel can rust e Any sign of mild rust or corrosion should be thoroughly cleaned with warm soapy water and dried as soon as possible e NEVER use abrasive pads or cleaners for cleaning e Medium rust or corrosion can treated by a commercial cleaning agent that contains citric oxalic nitric phosphoric Do NOT use cleaning agents with chlorides or other harsh chemicals as this can cause corrosion After treatment wash with warm not hot soapy water and dry thoroughly e Thoroughly wipe the surfaces dry after cleaning and do NOT let water pool on the unit Check crevices and folds for pooling e If an abrasive product is used while cleaning thoroughly dry the unit and leave in an open or oxidised area for the stainless steel protective layer to replenish e When using ensure all liquids and moisture is cleaned up straight away Food liquids such as juices from vegetables and fruits should NOT be left on preparation surfaces e Do NOT leave items on the stainless steel such as cutting boards rubber mats and bottles Surface Finish e To protect the polish stainless steel should be dried by wiping a dry soft cloth in the same direction as grained polish e For NON food contact surfaces a light oil can be wiped on the surfaces with a cloth to enhance the stai
11. d Read these instrucitons carefully and retain for future reference Important This appliance should NOT be operated by person s including children with reduced physical sensory or mental capabilities or lack of experience or knowledge unless they have been given supervision or instruction concerning the safe use of the appliance by person s responsible for their safety e All appliances MUST be installed according to the procedures stated in the installation section of this manual e Inthe case of new personnel training is to be provided in advance Personal protective equipment should be used where necessary and in accordance with the law e Do NOT use this appliance for any other purpose than its intended use e Do NOT store explosive substances such as aerosol cans with a flammable propellant in or near this appliance e Do NOT use hoses or harmful materials on the appliance e f the power supply cord becomes damaged it must be replaced the by manufacturer an authorised service agent or similarly qualified persons to avoid a hazard e Do NOT use sharp objects to activate controls e If any fault is detected disconnect the appliance from the mains and call the service agent e Do NOT use the appliance in an explosive atmosphere e The manufacturer declines any liability for damages to persons and or things due and to an improper wrong and or unreasonable use of the unit Chip Dump Operation e Ensure 1 1 GN pan
12. dure must be followed to claim under Stoddart s warranties 4 2 Refer to the trouble shooting section of the Instructions to establish the nature of the fault Check the equipment is plugged in turned on or has no other valid reason for not operating 4 3 If step a does not overcome the issue you should report the fault with the equipment to our service department phone 1300 307 289 or fax 07 3344 6166 Our service department will assist you with further trouble shooting If our service department is unable to resolve the fault with the equipment they will request you complete a Stoddart Warranty Request Form and fax fax 07 3344 6166 or email service stoddart com au it to us 4 4 To complete a Stoddart Warranty Request Form you will require the following information Proof of purchase stating model number and date of purchase ii The serial number of the equipment this is located on the ratings plate sticker iii A description of the fault problem iv Your company details including the exact location of the equipment and v Any restrictions on times or methods of access to the equipment 4 5 Stoddart will not arrange a warranty call out until it receives the above information from you in writing 4 6 Upon receipt of a properly completed Stoddart Warranty Request Form Stoddart will check its records to confirm whether the equipment is eligible for warranty repair If warranty repair is required Stoddart will issue an OFFICIAL
13. e plastic film tapes ties and packers before installing and operating Clean off any glue residue left over from the protective plastic film e Wipe all surfaces with a clean sanitised cloth Positioning e Ensure the unit is cupboard unit positioned on a level surface e Adjust legs as required Assembly e Fit 1 1 GN Pan to cupboard unit e Fit perforated crumb tray into 1 1 GN pan e Fit heat lamp assembly to cupboard unit e Plug heat lamp assembly into power source Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 6 INSTALLATION OPERATION MAINTENANCE Culinaire Chip Dump CH CD Assembly Details Perforated crumb tray Heat lamp assembly 1 1 GN Pan Cupboard unit Adjustable leg Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 7 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD General Recommendations When using any electrical appliance safety precautions should always be observed Our appliances have been designed to give high performance Hence the appliance must be used exclusively for the purpose for which it has been designe
14. ice service stoddart com au Spare Parts spares stoddart com au Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 11 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD Warranty Australian Warranty and Contact Details As the exclusive manufacturer and distributor of Culinaire products in Australia Stoddart Manufacturing Stoddart would like to congratulate you on your purchase of a Culinaire product It should be noted by users of the product that it is not designed for household or domestic use and should not be used for this purpose This product is intended for commercial use and in line with Australian electrical safety standards the following warnings are provided This product is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety Children should be supervised to ensure that they do not play with the product Users should also note that if the supply electricity cord is damaged in any way it should be replaced Please contact Stoddart for parts and we will advise how to do this in order to avoid any electrical hazard
15. l result in the IMMEDI ATE LOSS OF THE WARRANTY The manufacturer cannot be held responsible or liable for any unauthorized modifications All modifications must be approved by the manufacturer in writing before initiating All modifications or works performed to this appliance must be performed at all times by a TRAINED AND AUTHORISED SPECIALISTS General Safety Service Stoddart one of our agents or a similarly qualified person s should carry out any and all repairs maintenance and services Any repair person s should be instructed to read the safety warnings within this manual before commencing work on these units Sharp Edges Steel cutting processes such as those used in the construction of this chip dump result in sharp edges Whilst any such edges are removed to the best of our ability it is always wise to take care when in contact with any edge Particular care should be taken to avoid contact with any internal edge all repair or maintenance person s prior to commencement of any servicing must read the maintenance section of this manual Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 2 INSTALLATION OPERATION MAINTENANCE Culinaire Chip Dump CH CD Specifications Introduction The Culinaire Chip Dump is designed to keep cooked product at
16. nd lift off cupboard unit e DONOT immerse in water this unit is not water proof WARNING The external surfaces of this unit are NOT waterproof DO NOT hose the heat lamp assembly External and Internal surfaces of base cabinet e Clean the surfaces with warm not hot soapy water and a sponge e After cleaning thoroughly wipe the surfaces dry with a soft cloth Do NOT let water pool on any surface check crevices and folds Crumb Tray amp 1 1 GN pan e The strainer tray and 1 1 GN pan can be cleaned in a dishwasher or kitchen sink with warm soapy water Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 9 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD Maintenance Routines Schedules e To maintain optimal performance cleaning and maintenance schedules must be regular and thorough e The unit should be cleaned at the end of the EVERY WORK DAY Log Books e Log books should be kept for all cleaning and maintenance of this unit Inspection e Surfaces should be checked at least once a week for damage or deterioration Stainless Steel Protection Cleaning e For cleaning the stainless stain check the cleaning section of the operation manual e All metal surfaces should be checked while cleaning for damage scuffs or scapes as these c
17. nless steel surface Wipe in the direction of the grain e Some commercial stainless stain cleaners can leave residue or film on the metal this may trap fine particles of food on the surface thus deeming the surfaces not food safe Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 10 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD Replacements Cumb Tray 1 1 GN Pan Heat Lamps e The cumb tray 1 1GN Pan and 500 watt heat lamps can be replaced by the manufacturer Heat Lamp Replacement e Remove old heat lamp by sliding the heat lamp to the left or right by depressing the spring loaded porcelain fitting and lifting the opposite end of the heat lamp NOTE DO NOT touch the new heat lamp with your fingers as this will leave a greasy residue with will cause the heat lamp to fail Read instructions on packaging e Install the new heat lamp by sliding the heat lamp to the left or right by depressing the spring loaded porcelain fitting and placing the opposite end of the heat lamp into the porcelain fitting i Porcelain fitting Heat lamp Servicing and Replacement Information Line All Parts Stoddart Manufacturing Sales 1300 791 954 Customer Service 1300 307 289 Fax 07 3344 6166 Sales fse stoddart com au Customer Serv
18. s is essential to the equipment s effective operation vii On site warranty services are limited to sites within 50km from the nearest Stoddart authorized service agent and service agent s reasonable travel costs must be paid by Customer prior to the commencement of the repairs Public Holidays viii Stoddart cannot guarantee the performance of equipment made specifically to Customer s design or specifications Stoddart will where reasonably possible draw any issues arising from Customer s design or specifications to Customer s attention during the commissioning and or manufacturing process and ix Customer must pay additional costs incurred by Stoddart as a result of Customer failing to provide suitable access to the equipment for inspection and service Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 12 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD 3 2 Stoddart s warranty liability under clauses 1 and 2 of these Terms exclude or do not cover i The matters acknowledged by Customer in clause 3 1 ii Situations where Stoddart is not satisfied acting reasonably the equipment or any part of the equipment has been used in accordance with the Instructions including misuse neglect unauthorised alteration incorrect installation power surges
19. s not amount to a Major Failure 3 Warranty Clarification 3 1 Customer acknowledges and agrees i A Major Failure occurs when the equipment suffers repeated and or unexpected failure that cannot be repaired to Stoddart s satisfaction acting reasonably or which Stoddart considers acting reasonably renders the equipment unsafe or inoperable ii Stoddart can only warrant the equipment will be of an Acceptable Quality when Customer uses the equipment in accordance with Stoddart s manufacturer s instructions or user manual Instructions Acceptable Quality does not imply a lifetime guarantee for the equipment iii Certain components have a finite expected life especially in a commercial or high use environment For example components such as refrigeration compressors elements thermostats simmerstats switches fans and temperature controllers can be expected to last up to 12 months when used in accordance with the instructions iv In a commercial environment components such as lamps fluorescent tubes light bulbs glass silicone seals gaskets and plastic components will require regular replacement This is not covered by warranty and is at Customer s cost v The life of equipment may be adversely affected by misuse neglect unauthorised alteration incorrect installation power surges accident use of inappropriate chemicals flooding and acts of God vi Proper maintenance and cleaning of equipment in accordance with the Instruction
20. ssembly DetallS ooo a os 7 General Recommendations Soon na 8 Chip Dump Opera Micra ii E A as 8 A AS 9 Schedule MEA OU mE o css daatavecainesdsytsts sa cndentadeoasd ES AAA NEAN 9 TOMO Nica cada 9 Heat Lamp Assembly ici dr add 9 External and Internal surfaces of base cabinet 9 Crumb Tray amp I I GN PAN intimista e ile 9 Malta ise 10 ROUTE neraet ets ia testeado 10 o A NN 10 Log BOOKS Scenic da o dae decada 10 MIS PECUIOM iii ais a iia 10 Stainless Steel Protection eucariotas 10 Canada 10 Corrosion Protection aora Doa 10 Surface RIMA ctricos rn id ebrios 10 Replacement Sasnnn ea ara E eaaie Ea a DE E R a a 11 Cumb Tray 1 1 GN Pan Heat LaMpS ooccccocicnncncccocccnoninnnnnnnonnnnnnnnnnnnnnnanancnnanannnns 11 Heat Lamp Replacement ooconocicccccnncnnnnnoconcnnnnnnnnnnnnononcnnnnnnnninanonnnnnnnnnncnnarcrnaninnnns 11 Servicing and Replacement Information Line ooiniccnnnnnocncociconcnnnnnnnnnnnrnnanonnnnnnn EEEE EEEE 11 WEAN A E O Eo huueehiaas bia E ined awa OA 12 Australian Warranty and Contact Details 00 0 0 cee e eee terre nn nn nn nn nn nnrnrnnnns 12 Australian Warranty Policy amp ProC Ure cece teeter eee nono nincnnnnnnns 12 WARRANTY IREQUEST FORM vi ssissssicciustri sed id pai 14 Due to continuous product research and development the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 1
21. t the information contained herein is subject to change Revision Date 5 03 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Version 1 Page 5 INSTALLATION OPERATION amp MAINTENANCE Culinaire Chip Dump CH CD Installation General Precautions WARNING Installation must comply with local health amp safety requirements I mproper installation adjustment alteration service or maintenance can cause property damage injury or death Front Elevation End Elevation e Do NOT use this chip dump for other than its intended use e Regulations require that all units be installed to the appropriate Australian standards Setting Up Handling e Use suitable means to move the appliance eg A lift truck or fork pallet trucks the forks should reach more than halfway beneath the appliance Site Preparation e Ensure the site is level and properly cleaned e Ensure that all joinery or benches for the unit are made before installation Unpacking e Check the unit for damage before and after unpacking If unit is damaged contact the distributor and manufacturer e Wear protective gloves to unpack the appliance from the box e The unit is supplied fully assembled Shelves and element covers need to be set up e Gastronorm pans are packed separately e Unpack and visually inspect the unit for damage or missing parts Report any problems to the distributor or manufacturer e Remove all protectiv
Download Pdf Manuals
Related Search