to the current draft of the Sansaire user manual
Contents
1. JAIYSNYG IMPORTANT SAFEGUARDS When using electrical appliances always follow basic safety precau tions including the following Read all instructions before operating the device To protect against risk of electrical shock do not fill the water level past the Maximum Fill line or otherwise immerse the upper section of the machine in water or other liquid Never operate the machine without the back cover securely attached and the machine clamped to a sturdy surface like a stock pot Do not touch hot surfaces Always supervise children when they use any electrical appliance Avoid contacting moving parts Unplug the unit from outlet when not in use Ensure the unit is unplugged and off before cleaning or performing maintenance Clean hot surfaces with caution If a wet sponge or cloth is used on hot surfaces be careful to avoid steam burn Some cleaners can produce noxious fumes if applied to hot surfaces Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner Return appliance to the nearest authorized service facility for examination repair or electrical or mechanical adjustment The use of attachments not recommended or sold by the manu facturer may cause fire electric shock or injury Do not use outdoors Do not permanently mount to any surface Do not let cord hang over edge of table or counter Please save these instruction2. F button e e e e d e e 10 Water BATHS The Sansaire Immersion Circulator is designed to attach to many shapes and sizes of baths When in use the circulator needs to be clamped to the wall vertically and securely This prevents the machine from accidental water exposure The bath should hold no more than 20 liters about 21 quarts of water to ensure the water tem perature is kept uniform RESETTING The Sansaire has a safety mech anism in case the water level becomes too low and the heat ing elements begin to overheat This usually happens if the machine is turned on for an extended period outside a water bath or the water level becomes too low If this happens the display reads RESET Let the heating element cool and press the reset button on the back of the circulator to return normal functionality 11 CLAMP POSITION The clamp on the back of the Sansaire Immersion Circulator has two different configurations In most cases the clamp should attach to the machine on the inner peg but if the container wall is thicker the second peg can also be used To move the clamp between pegs press the clamp towards the center of the circulator and pull down gently Once the clamp is off the axel align the axel with the desired peg and pull up gently The clamp can be completely detached for cleaning However the circulator should never operate without the clamp attached
3. Min Max Water 7 5 16 5 cm Dimensions 4x5 x 14 5 in Dimensions 10 x 12 5 x 36 5 cm Household Use Only Household Use Only Made in China Made in China
4. and secured to a bath H Ogyogo REMOVING BACK COVER AND GRATE The circulator has a back cover that is detachable It should only be detached when the circulator is off and unplugged for cleaning and never during use To open Detach the clamp slide the latch left and pull the back cover down and and away With the cover off the grate can be detached as well To close Place the grate in the slot running along the bottom of the circula tor s front inner surface The two grooves on the grate should be aligned towards the left and right side of the casing The back cover can now be slid back on and latched followed by the attachment of the clamp 13 MAINTENANCE CLEANING In the course of normal use food particles and minerals from the water bath may collect on the Sansaire Immersion Circulator We recommend regular cleaning of the housing impeller and heating coils l 14 Power off unplug and remove the Sansaire Immersion Circulator from the water bath If the unit is hot wait for the unit to cool down Remove the power cord from the back of the unit Remove the clamp from the back of the unit Slide the back cover tab to release the back cover exposing the im peller and heating coils NOTE The upper section of the Sansaire Immersion Circulator contains sensitive electronics and should never come in contact with water While holding the unit upright rinse under running water to remove food
5. ding by per forming the following steps 1 Prepare a water bath at or around a normal cooking temperature ex 50 0 C 2 Measure the temperature of the water bath with an accurate digital thermometer Note the difference between the Sansaire Immersion Circulator s temperature reading and the reading from your thermom eter 3 With the unit running hold down the C F button for a few seconds The display will show the current offset temperature 4 Turn the temperature ring to adjust the offset value For example setting the offset value to 1 5 C increases the temperature reading by 1 5 degrees NOTE Most inexpensive kitchen thermometers are less accurate than the Sansaire For recalibrating we recommend using a professional reference thermometer such as those sold by ThermoWorks ThermoWorks com I7 TROUBLESHOOTING If you have any issues with your machine check to see if these troubleshooting instructions solve the issue If the problem persists contact customer service for options on servicing the unit Symptom The water bath does not get hot or does not circulate Press the Start Stop button to activate the heating coils and circulating motor You should be able to see water moving through the pump out let opening If water is flowing but does not heat ensure that the target temperature that is above the current temperature of the water Symptom The Sansaire Immersion Circulator does not turn on Ens
6. ns immediately mode if water level is too low CIF This button to swiches between Celsius 10 CLAMP The clamp attaches the machine to and Fahrenheit units on the display the wall of a water container DisPLAY During normal operation the Il LATCH The latch locks and unlocks the display shows the current temperature of the back cover to the base of the immersion water bath When you turn the temperature circulator ring the display temporarily shows target 2 Back Cover Slides off for easy access to temperature heating element and pump impeller for clean Minimum FitL Maximum Fit These lines ing Always operate with the cover attached indicate the minimum and maximum fill levels 13 GRATE Removable metal base at the bottom on the circulator to keep heating elements free from contact with other objects OPERATION USER INTERFACE During regular operation the primary user interface is the power button to turn the machine on and off and the temperature ring to change the target temperature The display by default shows the current temperature of the water However when the temperature ring is turned or the power is turned on the display turns to showing the target temperature Regular temperatures range from 40C 105F to 85C 185F To view the target temperature at any point press the target temperature button The display can be chosen to show temperature in Celsius or Fahrenheit by pressing the C
7. ood and with plenty of room for water to circulate 2 Attach the Sansaire Immersion Circulator to the side of the con tainer Add water until the level is above the Minimum Fill line but below the Maximum Fill line Remember that the water level will rise when you add your food Never turn on the Sansaire Immersion Circulator in an empty or under filled water bath 3 Plug in the Sansaire Immersion Circulator 4 Press the Power button on the top of the unit This turns on the display and makes the circulator heat the water to the set target temperature Set the target temperature of the water bath by turn ing the silver Temperature Ring above the display The Sansaire Immersion Circulator automatically keeps the water at the target temperature until you turn it off Your water bath is now ready for cooking FEATURES for the water bath Never operate your imme sion circulator if the water level is outside of these boundaries as it may cause damage to the unit TEMPERATURE RING Turning the ring sets the target temperature of your water bath 7 Pump OuTLetT The circulator moves water TARGET BUTTON Used to show the target Leg through the pump outlet to keep the water temperatre on the display temporarily he bath at an even temperature Power BUTTON Used to turn the circulator 8 Power Corb PLUG on and off When on heating and circulating 9 Reset For safety the machine enters reset begi
8. particles and cool the coils if still warm If necessary scrub the unit gently with a sponge or brush and a drop of dishwashing liquid Rinse the unit thoroughly ensuring that water does not enter the upper section Reinstall the back cover and clamp 15 DECALCIFYING After some time the coils accumulate calcium deposites due to the water bath Add a decalcifying agent such as CLR to your water bath following the dilu tion instructions provided by the manufacturer Set the temperature of your water bath to 25 C 77 F and allow the unit to run for 10 minutes Power off unplug and remove the Sansaire Immersion circulator from the water bath and continue cleaning per the instructions above Discard the water in the bath and thoroughly clean the container and any other materials in contact with the bath WARNING Do not add food bagged or otherwise to the water bath while cleaning and ensure that the bath water has been replaced withfresh water before cooking STORAGE You may choose to leave the Sansaire Immersion Circulator clamped to the water bath when not in use but it should be unplugged from the power source However should you need to store your circulator wipe the unit dry using a cloth or paper towel prior to putting it away 16 TEMPERATURE CALIBRATION Your Sansaire Immersion Circulator is factory calibrated but also allows for a manual temperature offset You may adjust the temperature rea
9. s TABLE OF CONTENTS a a ee a Important Safeguards Table of Contents Cooking Sous Vide Setup Features Operation e User Interface Water Baths Resetting Clamp Back Plate Grate Maintenance e Cleaning Decalcifying Storage Temperature Calibration Troubleshooting 16 20 COOKING Sous VIDE The Sansaire Immersion Circulator is designed for sous vide cooking High end restaurants have been cooking with the sous vide method for years and trying to keep it secret You are about to see how easy it is to achieve perfectly cooked proteins and vegetables every time It works like this Preheat your water bath to the desired cooking temperature by adjusting the temperature ring on your Sansaire Immersion Circulator 1 Seal the ingredients you wish to cook in a plastic bag You can also use a canning jar filled with your favorite cooking oil 2 Place the bagged food in the water bath and let it cook until it has reached its target temperature 3 Give your food a quick sear and it s ready to serve Unlike cooking on a stove or in the oven the temperatures are low well below boiling temperatures By setting the right temperature for your ingre dients your food won t overcook if you leave it in the water bath it can t get hotter than the temperature you set To learn more about sous vide and for recipes and techniques visit SANSAIRE COM SETUP 1 Pick a container large enough to hold your f
10. ure that the power cord is firmly attached in the rear of the unit In some cases a household circuit may become overloaded from the use of electrical appliances causing the outlet to stop supplying power Check any circuit breaker the outlet is connected to in the house Symptom The display reads RESET The Sansaire Immersion Circulator includes a safety mechanism to protect components from overheating This normally occurs when the water level is too low or the machine is operated outside a water bath 18 If this happens wait for the machine components to cool down and press the Reset button on the back of the unit to restore the Sansaire Immersion Circulator to normal operation Symptom Power cord becomes hot to the touch Check that the power cord is the original included in the packaging If it is not the cord may be rated too low It needs to be rated at 16AWG or less to handle the current draw without heating If after replacing the cord the circulator continues to heat the cord contact our custom er service department 19 HELLO FROM SEATTLE ModernChef Inc ModernChef Inc Product Immersion Circulator Product Immersion Circulator Model No SA3 07us Model No SA3 07eu Power 100 130VAC 50 60Hz Power 220 240VAC 50 60Hz Max Current 10Amps Max Current 5 Amps Coil Wattage 1100 Watts Coil Wattage 1100 Watts Temp Range 0 100 C 32 212 F Temp Range 0 100 C 32 212 F Min Max Water 3 6 5 in
Download Pdf Manuals
Related Search