KGN&, > 3Ϯs USER MANUAL
Contents
1. Safety Precautions Important Safety Instructions Warnings and Precautions To prevent any injuries the following safety precautions should be observed in the installation use servicing and maintenance of this equipment Before operating this equipment please read this manual completely and keep it nearby for future reference 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with a dry cloth 7 Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use the attachments accessories specified by the manufacturer 12 Use only with a cart stand tripod bracket or t2. User Guidance Information Functions of remote control buttons The remote control is using Infra Red IR Point it towards the front of the TV The remote control may not work correctly if it is operated out of range or out of angle CH list SUBTITLE Z G B REC c ED ee C HOLD REVEAL TV TXT SIZE SUBPAGE INDEX POWER Tum the TV on standby INPUT Press to display the input source menu PICTURE Select the picture mode SOUND Select the sound mode SLEEP Standby timer DISPLAY Press to display the current mode s information MUTE Press to mute the sound press again or press VOL to unmute MENU System setup menu EXIT Exit the OSD menu FAV Display the favorite program list NUMBER BUTTONS PressO 9 to select a TV channel directly when you are watching TV GD Return to the previous channel viewed CURSOR KEYS 4 v lt gt OK Allows you to navigate the on screen menus and adjust the system settings to your preference CH Scan through channels VOL Adjust the volume User Guidance Information Remote Control 00000 0000 90 0 m Z c CH list SUBTITLE AUDIO REC HOLD REVEAL TV TXT SIZE SUBPAGE INDEX EPG To show the Electronic Program Guide during no menu state only in DTV mode CH list Display the programs list SUBTITLE Turn on off the subtitle display in DTV mode AUDIO Auto adjust in the PC mode REC Press to start re
3. 2 Recording Timer Recording Timer 655335 Set the Recording Timer The TV will record the program automatically according to your settings TITLE Display the name of the recording program MODE Select the record mode Start Time Set the start recording time End Time Set the end recording time Press OK button to save the setting and exit the menu start Time Minute 00 Hour 00 Date 2005 07 20 Month Jan End Time Minute 00 Hour 00 Date 2005 07 20 Month Jan Move k Select LE 21 Recording Operation Recording Operation 3 Schedule List Schedule List Programme Title Channel Name Mode K E er E K El E El Delete Quit Display the recorder shedule Note a Could t add shedules which have existent on the list b Could t add shedules when the list is full you have to delete some schedules c You could delete a schedules by RED button on the remote control 4 PVR File System PVR File System select Disk Check PVR File System USB Disk Format Time Shift Size speed i Select Setup the PVR File system before you start recording Select Disk Select the device for the Record files Check PVR File System USB Disc Display the USB state Format Format the USB device for PVR operating Time Shift Size Display the size of the USB device The device has been formated Speed Display the speed of the USB device The device has been formated 22 Recording Operat
4. di A amp y N N d f A Hn Wah f 1 b y d N b A 4 4 y KGNQ 5 953Hst USER MANUAL x et wow Tm sis pu i a Ya AO COCOT L TA lt a P ts V ANA vA ij a ian P 1 f i A 5 9 4 Oo I 57 4B o4 41 1 2 A BEL T Rs e f F AUOCI e Contents Safety Precautions POWER OUPO iein e atrio ied tdeded ideales eia aein eed ed sn oed t a case Eu UM abe UEM 1 deze T H 2 Use and IMIS NAIC Oc esas i ions 3 Imporant Salely INSWUCONS e 4 5 User Guidance Information Names of each part Front View Accessories ccccccccccsssseeceeeseceeceeseeeceeeseecessuseeeeseagecessseuseeessaseeesseaeeseeses 6 Names of each part Back View iuatveipiseekn idi Rea dne ana ra Rd n a ea a ew uolet dra ka aea Ld zat eed ER 7 ROMO COMMON saree nore rese me erent 8 9 Basic Operation BASIC Del AUN azar T ee 10 OSD Menu Rel nz 11 12 2 PICTURE MO oi Mii p EE EL MM MM EE EM EI M I M E 13 S SOUND MENU veneisse ER 14 4 UMER MENU apace dtes et E E E a Said asia e 15 select cc crx 16 M LOCK MONU ec c ccr 17 Multimedia Operation M timedia Ole rio eR cm 18 20 Recording Operation Recording OPSTAO M RN E I E E
5. Select and check the other input If the sound still does not work and the other channels are the same after you have done as the above contact your dealer or an authorized service center 1 Check if main power is On 2 Check that the batteries of the remote controller were loaded properly 3 Check to see if any obstacle exists between the TV and the remote control then remove it if any 4 f the batteries have no power replace them with two new batteries This TV is for household use and registered as harmless on electromagnetic waves Therefore you can use it in every location as well as residential areas 24 Maintenance and Service Specifications Techincal Specifications TV TVSystem PAL BG DK SECAM BG DK Screen size 32 diagonal Resolution 1920 x 1080 pixels RGB Aerial input 75 Q unbalanced Power Consumption 100 240V 100W 25 ENGLISH Instructions on environment protection Do not dispose of this product in the usual household garbage at the end of its lifecycle hand it over at a collection point for the recycling of electrical and electronic appliances The symbol on the product the instructions for E USC OF the packing will inform about the methods for disposal The materials are recyclable as mentioned in this marking By recycling material recycling or other forms of re utilization of old appliances you are making an important contribution to protect our environment Pleas
6. The unit could topple over onto a child and result in serious injury If you notice any unusual odors or smoke around the unit immediately disconnect the unit from the outlet and contact the service center Failure to do so may result in fire or electric shock QNS a L1 A It is advisable to clean the interior of the unit at least once a year Contact the store of purchase or service center for information Continuing to use the unit without cleaning off the dust build up inside it may result in fire or electric shock pi Never disassemble or modify the unit in any way Do not attempt to service the unit yourself Doing so may result in fire or electric shock If the unit requires repair contact the service center cof o Warnings When removing the batteries from the remote control make sure children do not swallow them Keep the batteries out of the reach of infants and children lf a child has swallowed a battery seek medical atten tion immediately Always turn off the unit and unplug the power cord when cleaning the unit Use a soft dry cloth to clean the unit Never clean with industrial strength polish wax benzene paint thinner air freshener lubricant detergent or other such chemicals Also do not clean with a damp cloth
7. If the temperature inside the unit rises it may result in fire Do not use or store flamm able or combustible materials near the unit Doing so may result in fire or explosion Do not run power cords near heat producing appliances such as radiators stoves or irons The excessive heat could melt the insulation and expose live wires resulting in fire or electric shock Be sure to place the unit on a level surface A Warning Ignoring this precaution may result in death or serious injury Caution Ignoring this precaution may result in injury or property damage Safety Precautions Do not place the unit on an unstable surface such as a wobbly stand or sloped table or on any surface whose area is smaller than the bottom area of the unit s If a child climbs on the unit it could topple and fall onto the child resulting in serious injury to the child or damage to the unit Place the unit on a flat stable surface Install the antenna away from high voltage power lines and communication cables and make sure it is installed securely If the antenna touches a power line contact with the antenna could result in fire electric shock serious injury or death Doe 1 A Warnings Form a drip loop where the coaxial antenna cable enters your building to prevent rainwater from traveling along the cable and coming in contact with the antenn
8. cancel Step Step the programs by OK button press gt play button to cancel Goto Time Program the movie form the time you set Zoom out in Zoom out in the movie screen Aspect Ratio Select the aspect ratio of the screen display Move View Move the photo in Zoom in mode 4 Text Play the text Czech 0 Danish 1 German 2 English 3 Spanish 4 Greek 5 en str Picture Text 0 OBRAZ en str Picture Text 1 BILLEDE en str Picture Text 2 BILD en str Picture Text 3 PICTURE lt Prev Page Next Page Press button to select the option on the table and press OK button to change Prev Next page Turn to previous next page of the text Prev Next Turn to previous next file Stop Stop auto turning pages Music Play pause the music program Playlist Display the playlist on the screen Info Display the information of the text 20 Recording Operation Recording Operation PVR settings Press the MENU button and select CHANNEL menu HE T MM MEE C is Software Update USB Pe Record Start y gt Recorded List a Recording Timer _ Schedule List CHANNEL PVR File System A Select Quit 1 Recorded List Recorded List Programme BBC News JEE Display the recorded list Recorded list Display the Recorder List menu Delete Fo and changed the mode of program PS eerie INFO Display the information of the program you recorded RED button Delete the program you select
9. for time is from signal source directly Off Time Press OK button to enter the submenu you could set the time when the TV set will be turned off automatically you could also set the frequency On Time Press OK button to enter the submenu you could set the time when the TV set will be turned on automatically you could also set the frequency volume and program Sleep Timer Allows you to setup the sleep timer among 10min 20min 30min 60min 90min 120min 180min 240min and off Auto Sleep Turn on off the auto standby function Time Zone Allows you to select the time zone 15 OSD Menu 5 OPTION menu A x OSD Language English Audio Languages 1st English f 3 Audio Languages 2nd English Subtitle Languages 1st English Subtitle Languages 2nd English OPTION ORIDE BU gU 0 10s Country Australia Select Description OSD Language Allows you to select menu language Audio Language 1st 2nd can be selected in DTV mode Allows you to select first and second audio language Subtitle Language 1st 2nd can be selected in DTV mode Allows you to select first and second subtitle language OSD Duration Allows you to setup the time of the menu display on the screen among oS 10s 15s 20s 25s 30s 35s 40s Country Display the current Country and you should select the Country when you want to auto tuning Restore Factory Default Press OK button to restore factory
10. to change the name of the channel by A V lt gt buttons FAV Select a program press FAV button to set or delete the program as the favorite channel Signal Information Display the signal information in DTV mode Software Update USB Press OK button to enter the menu and update the software by the USB device 12 OSD Menu 2 PICTURE menu T 9 d Picture Mode standard Contrast 30 P Rrinntn E Brightness 50 i Color sharpness 50 PICTURE Tint 50 Color Temperature Medium Red 20 Select Quit Description Picture Mode Choose from Standard Dynamic User and Mild Note Contrast Brightness Color and sharpness are only available and can be adjusted in the User mode option in the Picture Mode Settings Contrast Controls the difference between the brightest and darkest regions of the picture Brightness Controls the overall brightness of the picture Color Control the color Sharpness Increase this setting to see crisp edges in the picture decrease it for soft edges Tint Controls the tint NTSC mode only Color Temperature Choose from Medium Cool User and Warm Red Controls the red colour of the picture Green Controls the green colour of the picture Blue Con trols the blue colour of the picture Aspect Ratio Choose from 4 3 16 9 Zoom1 Zoom2 Just Scan and Panorama Note The aspect ratio modes you can select according to the input source Noise Reduction Choo
11. to the options table Info Display the information of the photo Rotate Rotate the photo clockwise counterclockwise Zoom Out In Zoom out in the photo Move View Move the photo in Zoom in mode 2 Music Play the music Press lt gt button to select the option on the table and press OK button to change Press A V button to select the music and press OK button to program Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Search Program the music form the time you set Press OK button to display the time table and select the position by lt gt A V button set the time by the number buttons select OK and press OK button to search Screen Saver Press BLUE button to enter the Screen Saver mode press again to exit 19 Multimedia Operation Multimedia Operation 3 Movie Play the movie _ 00 00 00 00 50 00 fei E I t p S e Repeat 1 nfo Slow Step GOTO Time Zoom In Press lt gt button to select the option on the table and press OK button to change Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Set A B Select and play the preferable paragraph of the program by seting A and B at the beginning and end and there will be a sign on the left screen press OK button again to cancel Playlist Display the playlist on the screen Info Display the information of the movie Slow Play the programs at slow speed press _ P play button to
12. ET ROR 21 23 Maintenance and Service OUD E icieeino WERE cc c ETE 24 jore iier MO RR TI TT T Tm 25 Safety Precautions Power Supply Warnings Do not touch the power plug with wet hands Doing so may result in electric shock Do not bend the power cord excessively or place heavy objects on it Doing so may result in fire or electric shock a Cautions When disconnecting the power cord from an AC outlet always grasp it by the plug Pulling on the cord can damage the internal wire and may result in fire Do not use a damaged power cord or plug or a loose outlet Doing so may result in fire or electric shock Be sure to ground the unit Do not plug several devices into the same outlet Doing so may cause the outlet to overheat and start a fire Un 9 c SO FF IA M a ie SMEs UA O U Insert the power plug fully into the outlet A loose or improperly inserted power plug may result in fire Failing to do so may lead to electric shock when a short circuit or overload occurs If necessary install a ground fault circuit breaker Never ground to a telephone line lightning rod or metal gas pipe Doing so may result in fire electric shock or other hazards Always unplug the unit before cleaning Not doing so may result in fire or electric shock Th
13. QUALIFIED SERVICE PERSONNEL oB En Apparatus with Class construction shall be connected to a Mains socket outlet with a protective earthing connection WARNING TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Caution These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Names of each part Front View Led Indicator Remote control window keep clear INPUT Display the input source menu MENU Display exit the OSD menu CH Scan through channels VOL Adjust the volume POWER Turn on standby the TV set Accessories e The configuration of the components may look different from the following illustration User s Guide User s Guide Remote Control User Guidance Information J HO NANNAN LAdNI TIOA OO O90 0 0 O AMOd 10A User Guidance Information Names of each part Back View o00 AC POWER USB HDMI1 2 3 YPbPr Headphone HDMI3 Coax Coax out Q PC AUDIO IN Q VGA QD Headphone out Video LRaudio in RF Remote Control
14. a input terminal If rainwater finds its way inside the unit it may result in fire or electric shock Safety Precautions Use and Maintenance Warnings Disconnect the power cord from the wall outlet during an electrical storm Not doing so may result in fire or electric shock Cautions When not using the unit for long periods of time discon nect the power cord from the wall outlet Dust could accumulate over time on the unit and cause it to generate heat and ignite or deteriorate insulation which in turn may result in an electrical fire Always use two or more people to lift or move the unit f the unit is dropped it could be damaged or otherwise cause injury Do not insert any metal objects such as a screwdriver paper clip or bent wire into the ventilation openings or AN terminals Doing so poses a serious risk of fire or electric shock When moving the unit be sure to turn off the unit and unplug the power cord from the wall outlet Moving the unit with the power cord connected to the outlet may cause damage to the cord resulting in fire or electric shock Wipe off any moisture dirt or dust on the power plug pins with a clean dry cloth Failure to do so may result in fire or electric shock Do not allow children to climb or hang on the unit
15. able specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Safety Precautions Important Safety Instructions 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclo RISK OF ELECTRIC SHOCK sure that may be of sufficient magnitude to con DO NOT OPEN stitute a risk of electric shock to persons CAUTION TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral tri SHOCK DO NOT REMOVE COVER angle is intended to alert the user to the pres ence of important operating and maintenance OR BACK NO USER SERVICEABLE servicing instructions in the literature PARTS INSIDE REFER SERVICING TO accompanying the appliance
16. cord the program in DTV mode REC list Record List TV TXT Turn off on the Teletext display SIZE Press to see top half of page double size Press again to see the bottom half of page double size Press again for normal size SUBPAGE Press to enter subpages pressagain to cancel INDEX Go to index Colour buttons Short cuts follow the coloured links in the text gt II Play program Pause program B Stop program 44 Previous chapter gt gt Next chapter 44 Fast reverse gt gt Fast forward Basic Operation Power on off 1 Connect to the power supply with the power code 2 To turn on the TV Press POWER button on the TV or remote control To turn off the TV Press POWER button on the TV or remote control Input Source select Press INPUT button on the TV set or remote control to display input source menu and use CH button on the TV set or A V button on remote control to select the input source press OK button on the remote control to enter Note Before you select the input source make sure the connections are prepared Basic OSD Menu operation Press MENU button to display the OSD menu as below Basic Operation Move ok Select Exr Quit aS M Main menu E CHANNEL i DTV Manual Tuning PICTURE 2 E ATV Manual Tuning SOUND Programme Edit TIME M PTION j Signal Information O Software Update USB LOCK Back Select Submenu Chanel men
17. default 16 OSD Menu 6 LOCK menu AN d Lock System Set Password A Block Program Parental Guidance Select Description Lock System Turn on off the Lock System function Note You should enter the code to operate the menu original code is 0000 Set Password Set pin code If the Pin code has been changed you must enter the present code New Enter the new password Confirm Enter the new password Block Program Lock the channel you have to enter the code to view the channel Use and V buttons to select the channel and press the GREEN button on the remote control to lock the channel or canel Programme Edit CH NAME SKIP LOCK FAV 1 BBC ONE 2 BBC TWO 3 BBC THREE 4 BBC NEWS 24 5 BBCI 6 CBBC Channel 7 BBC World Newe Move Select Back Parental Guidance Allows you to select the Parental Guidance mode 17 Multimedia Operation Multimedia Operation Basic Operation Press the SOURCE button on the remote control to display the input source menu select USB source by the gt buttons and press OK button to enter the Multimedia menu seen below Input Source T AT YPBPR J lt HDMI2 HDMI3 gt u USB Move ok Select EH ei 2 Insert USB device you will find the name of the device display on the screen MAINS MENU PHOTO MUSIC MOVIE TEXT USB device list MAINS MENU PHOTO MUSIC MOVIE TEXT Hints for
18. e inquire at the community administration for the authorized disposal location Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories
19. e purpose of these precautions is to ensure user safety and prevent property damage Be sure to read and observe all safety precautions Installation Warnings Do not place containers with liquids such as flower vases soft drink cans or medicine bottles or small metallic objects on top of the unit If liquid enters the unit or any metal object falls into the unit it may result in short circuit fire or electric shock Me Do not place a burning candle burning anti mosquito incense or lighted cigarette on top of the unit Do not place the unit near any heat source such as a fireplace or space heater Doing so poses a serious risk of fire Install the unit at an adeq uate distance from the wall to ensure sufficient ventilation If the temperature inside the unit rises it may res ultin fire 4 v v w w em L x A 7 Ww x e The following precautions are divided into Warnings and Cautions Do not place the unit where it is exposed to rain excessive moisture or grease Doing so may result in fire electric shock malfunction or deformation Do not place the unit in a poorly ventilated enclosure such as a cabinet Doing so poses a serious risk of fire Do not cover the unit with a tablecloth curtain or other material
20. gram System Select a TV system for searching storage To 1 system DK Current CH Select the channel you want to manual tuning Current CH amp Search Press button to manual search search Fin Tune Press button to fine tune Fine Tune Frequency Display the current frequency Note Press RED button to save all the setups you have Move E save changed 11 OSD Menu Programme Edit Press OK button to enter the Program Edit menu as the following picture Programme Edit CH NAME SKIP LOCK 1 BBC ONE i 2 BBC TWO n 3 BBC THREE a 4 BBC NEWS 24 5 BBCI 6 CBBC Channel T BBC World Newe a A 6 PBBBBEEE N E z Move Select Back Delete Select a channel and press RED button Delete will appear on the right of the program edit menu next to the channel you have chosen then press RED button again the program will be deleted However if you decide not to continue to delete press the menu button to quit Move Select an channel and press YELLOW button then you can use A and V buttons to change the position of the program press YELLOW again to confirm the change Press menu to exit and it will automatically save the current set Skip Select a channel and press the BLUE button to label the channel as long as the channel has a skip label it will be skipped when searching through the channels with the CH buttons Rename Select an ATV channel and press the GREEN button
21. ion Recording Operation 5 Record Start When you finish the settings above you could start recording by select Record Start in the menu and press OK button in DTV mode You can also start recording by press the button on the remote control Record buttons Q Recording Press to enter the recording mode I PAUSE Press to enter the timeshift mode Recording list Press to display the recording list l Stop Press to stop recording Recording menu When you press REC button the screen will display the recording menu as below Full mode gt Simple mode Note a You could change the mode of Recording menu by Exit button b Press STOP button to exit the recording mode c Press PLAY button to play the program you are recording from the beginning d Press Recording list button to display the Recorder list and you could play the program you selected The recording will be going on and the Recording menu will display when you exit the Recorder list Timeshift Press PAUSE button to enter the Timeshift mode and the picture will be paused the recording will begin Note a You could change the mode of Timeshift menu by Exit button b Press STOP button to exit the Timeshift mode c Press PLAY button to play the program you are recording from the beginning Playback The current state of the program The current time The process P the program bi tl E Fause stop A B mark The name and number of the prog
22. operation Hints and informations of USB device 3 Press lt gt button to select the kind of the files in the device you want to program from PHOTO MUSIC MOVIE and TEXT Press A V button to select the device and press OK button to enter Return to CA Preview device list NIC Dscoaz36 JPG pscon2s8 JPG rani Up Folder di 2006 04 0 DSC00397 UPG 6 32 39 Informations ud Me Delete Current File TET TTETR T DSC01242 jpg Baldi qe OK Add lRemove t playlist Menu eer Quit Press lt gt A V buttons to move and press OK button to select the file or unfold the folder Then press gt button to play the files be signed you select or the files in the fold you select You can display the option table on the bottom of the screen by OK button press W button to hide Press Bl button to stop and exit the full screen program 18 Multimedia Operation Multimedia Operation 1 Photo Play the photo N m E o ro soe A Repeat 1 Music Playlist Info Rotate Rotate ZOOMIN ZOOM OUT Press lt gt button to select the option on the table and press OK button to change Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Music Play pause the music program you can only play or pause the music you have programed Playlist Display the playlist on the screen and you can select the photo by A V button and press OK button to program Press lt gt button to return
23. ram 23 Maintenance and Service Trouble shooting Do not use other functions that are not mentioned in this user s manual ln case a problem occurs with your TV please take the following steps first lf you still have the problem turn the power off and contact your dealer or an authorized service center Problem The screen does not appear The screen appears too slowly after the power is turned on Screen is too bright or too dark Screen is too large or too small Stripes appear on the screen and it shakes The screen does not move Screen appears Voice is not heard Remote control does not work Action Is the power plug pulled out Insert the power plug Press the power button of the remote control This problem occurs for a brief time in the process of image elimination processing in order to hide temporary screen noise that occurs when the power is turned on But if the screen does not come after 1 minute contact your dealer or an authorized service center Perform brightness adjustment or Contrast adjustment Adjust the screen size Stop using wireless telephones hair driers and electric drills Press the PAUSE button Check if the Pause button is pressed on external equipment 1 Press the MUTE button 2 Increase the sound level by pressing volume adjustment button 3 Check if sound terminal of external input is connected properly 4 Check if audio cables are connected properly 5
24. se interference noise modes form Off Low Middle High and Default Screen PC mode only Press OK button to enter the submenu to adjust Horizontal Vertical position Size or Phase of the picture 13 OSD Menu 3 SOUND menu y sound Mode standard Treble 50 Bass 50 B Balance 20 Auto Volume Surround Sound SPDIF MODE Back Select Quit Description Sound Mode Allows you to select among Standard Music Movie Sports and User Treble Could be adjusted when the sound mode is User Controls the relative intensity of higher pitched sounds Bass Can be adjusted when the sound mode is set to User Controls the relative intensity of lower pitched sounds Balance To adjust the balance of the left and right sound track or turn off the volume of the left and right sound track Auto Volume Control the volume of the program automatically when you turn on the function by selecting On Surround Sound Turn on off the surround sound function by selecting off surround SPDIF MODE Allows you to select among Off PCM and Auto 14 OSD Menu 4 TIME menu F Clock Off Time On Time sleep Timer Off Auto Sleep Off Time Zone Canary GMT Back Select Quit Description Clock Use the lt and gt buttons to select the position and use the V and buttons to set the time Note User can not change time manually during DTV mode
25. u for example Hint you should operate the OSD menu according to the hint Use lt gt button to select the main menu and press V button to enter the submenu In the submenu use V button to select the function item press lt gt button to adjust setup or press OK button to enter the submenu Press MENU button to return to the upper menu Press EXIT button to exit the menu display Note1 Only when you input the suitable signal the relevant items can be activated Note2 Please operating the OSD menu according to hint on the bottom of the banner 10 OSD Menu 1 CHANNEL menu Fe a 7 x Auto Scan DTV Manual Tuning Petits ATV Manual Tuning Programme Edit ES signal Information CHANNEL Software Update USB 2 Select Quit Description Auto Scan Auto Scan Press OK button to enter the hint menu and select the Country and Tune Type mode for the TV then press OK button to start auto tuning Country Australia Tune Type 4 ATV DT gt Move fear Exit DTV Manual Tuning VHF CH5 DTV Manual Tuning Press OK button to enter the DTV Manual Tuning menu select a DTV channel and press OK button to start searching NO SIGNAL Bad Hormal Good 8 NNNM NMNMNMNMNENMNNNENIS SIS6NSNSZINSIS6ESN IN ve Back jer Quit ATV Manual Tuning ATV Manual Tuning Press OK button to enter the ATV Manual Tuning menu Storage To Select a position for storing the pro
Download Pdf Manuals
Related Search