User+Manual-New PCB 2.0
Contents
1. indicator is lighting Inferior limit lt Weight lt cap limit accept indicator is lighting Weight gt cap limit the cap limit indicator is lighting 4 When the cap limit value is 0 the function will be closed 5 If re set the weighing units the function will be closed Note Please know the units and precision clearly in case of any error 2 Set Counting 1 Under the unit kg or g place given value sample on the pan then the same time press SET and ON ZERO key to set Now display PCS Press ON ZERO to confirm then it displays 00000 Now press SET to change the digit press TARE to change the value press ON ZERO to confirm After setting it will be auto turn on enter counting and counting indicate lighting 2 The data will be saved when power on again If re set weighing units or display precision the function will be closed Please re set 3 Under the unit lb no counting functions Signs Meaning e SP xx Version e nnnnnn Indicate that the weighting object is overloaded e Turn on zero is lower or higher please reduce and add weighing Or re calibrate e Lo A reminder that it will shut off in 1 minute power should be charged since the power voltage is too low e FULL Power has been charged fully2. of weighing Alarm Counting Parameters changeable Voltage indication and low voltage alarm Auto off power function 2 Product Model and Parameters Long work time with Sealed Lead acid Battery 6V4Ah MODEL 006 1 5 3 6 15 30 Max Capacity 600 g 1 5 kg 3 kg 6 kg 15 kg 30 kg Mini Capacity 4g 10 g 20 g 40 g 100 g 200 g Verification Scale Interval e 0 2 g 0 5 g lg 2g 5g 10g Actual Scale Interval d 0 05 g 0 1 g 0 2 g 0 5 g lg 2g Max TARE 600 g 1 5 kg 3 kg 6kg 15 kg 30 kg Accuracy CID Working Temperature 10 C 40 C Power supply 6V4Ah sealed lead acid battery With Special purpose charger Plate size 18 8 x 22 6 cm Functions and Operations 1 Turning on Scale Zero Operation When scale is off press ON ZERO key The whole display illuminates with a serial of steps that Scale Edition number SP x x display then system checks itself and the display screen is cleared After the Zero indicates lighting the display changes to indicate the gram display which is ready for weighting When scale is on press ON ZERO key The display screen is cleared 2 Turning off Scale Scale can be turned off forcibly by pressing OFF key 3 Tare Operation e Place the container on the scale until the display indicates a steady weight Press TARE key then the display indicates 0 and the Tare indicate lighting e Place the weighting objects into the container the
3. RO to confirm then into next item PrE Display Precision 0 means natural 1 means doubled precision 2 means super precision Initialization is 0 Unt Weighing unit 0 means g 1 means kg 2 means lb Initialization is 1 Brt Display Brightness 1 3 Bright to dim Initialization is 2 ZEr Zero tracking 0 4 0 to 4 divisions Initialization is 2 diS Reverse display O means closed 1 means keeping Initialization is 1 FILt Stability 0 3 Getting to most stable but display speed is getting to slowest Initialization is 1 SAV Energy saving function 0 is closing the function 1 is starting Out Audible alarm make complete of weighing alarm 0 is when inferior limit lt Weight lt cap limit audible alarm is starting 1 is when Weight lt inferior limit or Weight gt cap limit audible alarm is starting SPd Display Update Speed 0 is Speed Slow 1 is Speed Fast The Default is 0 After setting it will be auto turn on Weighing Alarm and Counting 1 Set Weighing Alarm 1 At zero the same time press SET and ON ZERO key to set Now display rAng 2 Press ON ZERO to confirm the inferior limit indicate lighting Now press SET to change the digit press TARE to change the value press ON ZERO to confirm Then the cap limit indicator is lighting and enters to set cap limit The same as set inferior limit 3 After setting it will be auto turn on Now if Weight lt inferior limit the inferior limit
4. WATERPROOF WEIGHING SCALE USER S MANUAL Instruction Manual NOTICE oria siidist Preparing Issues before Use 1 Product 1 Product Features moscada ci n ardid ada 2 Product Model and 2 Functions and Operations Turning on Scale Zero Operation Turning Off Scale ainia s Tare Operation ci iia COPE Power Immediate Indication _ Power Charge Power Saving Operation Environment Parameter Setting 1 Display 2 Unit of Measurement oeverreenennnnnnnnnn anname 3 Display Brightness sanidad A Zero TRACKING aasa 5 Reverse Display iii Salida lada 7 Energy Saving 9 Audible AIA RN kadu eeki kaa aa 9 Display Speed aid 4 Weighing Alarm and Counting 1 Set weighing ala A 5 Signs MOI Dc NOTICE 1 Do not use the scale in extreme temperature areas 2 Do not strike and stress Not over the Maximum Capacity 3 The scale should be put on an air flowing and dry
5. n the scale shows the Net weight e Move the container and the weighting objects off then the scale will show the minus weight of the container Then press TARE key again the tare weight can be cleared that the Tare indicate out and the scale is set to zero Can not tare while it is not stable Can do Tare Operation continuously till the Tare Weight equals the Maximum Capacity 4 Power Immediate Indication Power voltage is indicated under 3 levels When it is displaying L under Low level and flashing you should recharge immediately Otherwise it will be auto turned off in 15 minutes 5 Power Saving Operation e You could choose to open or close the Assistant Display to save power e After the indicated value steadied for 10 minutes the scale will be Auto off e After the indicated is at zero for 40 seconds the scale will show 0 6 Power Charge Operation The power of this scale is provided by Sealed Lead acid Battery 6V4Ah inside When the power voltage indicator shows that the power is low or the LED is displaying L and flashing scale should be charged by the charger in battery storehouse While charging the power indicator will coruscate circularly after electric quantity is full it will show FULL it need about 12hrs Environment Parameter Setting When scale is on the same time press on SET and TARE key you can enter the display of Environment Parameter Setting Press TARE key to choose and ON ZE
6. place with a clean surface and be charged every three months when it can not be used for a long time When it needs to be used again please charge it before use 4 As a counting meter for force check scale should be checked termly to ensure the accuracy 5 Do not open the lead sealing bottom of scale yourself You should contact with the dealer or company Prepare Issues before Use 1 Please place the scale on the stable and flat table no vibration Adjust the four feet of the scale to make the scale balanced till the air bladder of the gradienter is in the center of the circle 2 Do not place the scale in the environment which is near to temperature extremes or ail flowing extremes direct sunshine or the wind alleyway of air conditioning 3 Before opening the scale the scale plate can not be touched with anything 4 After opening the scale the barycenter of scale should be located in the center of the scale plate which will ensure the precision 5 Scale should be charged when the power voltage is not enough after opening scale Product Instruction 1 Product Features HACCP international food safety standard and CE RoHS approval certificates are all available Designed by professional institutions and up to the IP68 Waterproof level More suitable for product line with anti vibration design Dual Display LED Protection by Automatic overload alarming Functions of auto calibration and auto zero tracking Functions
Download Pdf Manuals
Related Search