Home

ACID 6.0a User Manual

1. g E Touch Pan 100 L Bj 4E e Hold Shift while clicking the Paint Clip Selector button to display the Open dialog where you can add a new clip Setting the active clip and creating events It is simple to set active clips and create events with ACID WORKING WITH TRACKS 107 108 CHAPTER 7 2 Click the Paint Clip Selector button in the track header A menu is displayed to list the track s current clips Piano amp p f2 AMERICAN PIANO PROMO 01 fl AMERICAN PIANO PROMO 02 Wol 3 1 dB i ik Touch f T T FE TT aia ai rrr epe Tr tPF rea Pan 100 L jH 2 AMERICAN PI AMERICAN FIANO PROMO 02 EE AMERICAN PIANO PROMO 01 None Add clip Clip Pool Choose a clip from the menu The selected clip is used for creating events with the Draw or Paint tool Copying clips and events across tracks In previous versions of ACID you could only copy and paste events within the same track Now you can use clips to copy events between tracks Tip You can also use the Cut Copy Bh and Paste el buttons in the Clip Pool tab in the Track Properties window 1 to cut copy and paste clips across tracks Select the events you want to copy Tip Hold Ctrl or Shift to select multiple events You can select multiple events that use different clips Drone Ambient 001 Okey H amp O Vol 6 0d8 m Pan Center 7 eg wa Envelope Bet 02 fey O O Vol E Fx ambient 03 Vol If yo
2. focus a control surface s mapped functions work no matter what part of the application has focus Connecting a control surface You can use one Mackie Control Universal with up to four Mackie Control Universal Extenders one Frontier TranzPort or up to five generic control surfaces with ACID software Perform the following steps for each device 1 Connect the MIDI Out port on your MIDI interface to the MIDI In port on your control surface 2 Connect the MIDI In port on your MIDI interface to the MIDI Out port on your control surface For more information see Configuring ACID to use your control surface on page 241 3 Configure ACID software to use your control surface Note f you re using a USB interface such as Frontier TranzPort just plug in the USB cable For information about your specific device please refer to the manufacturer s documentation Configuring ACID to use your control surface Use the MIDI tab in the Preferences dialog to select the device to which your control surface is connected For more information see Using the MIDI tab on page 232 1 From the Options menu choose Preferences to display the Preferences dialog 2 Enable your MIDI input and output ports a Select the MIDI tab in the Preferences dialog b In the Make these devices available for MIDI track playback box select the check box for the MIDI port that is connected to your control surface s In port c Inthe Make these devices avail
3. Available voices Fatch name Fatch Bank MSB Bank LSB J Voice Piano 1 ay Voice Piano 1 J Voice Piano 1d Note Audio driver latency can limit your ability to preview DLS voices in real time Using low latency drivers will produce the best results Changing VST instruments for soft synth controls You can choose a VST instrument from anywhere on your system for output from a soft synth control 1 Double click the soft synth icon on a control 4 The Soft Synth Properties window appears 2 Click the Edit Soft Synth button Edt Soft Synth h The Soft Synth Chooser dialog appears 3 Choose a VST instrument from the list and click OK If the VST instrument you want to use does not appear in the list you may need to locate the files for use in the ACID application For more information see Locating VST instruments on page 146 4 Select the Enable button T to enable playback of the VST instrument 5 Modify the VST instrument settings as needed using the buttons in the Soft Synth Properties window El Opens an effect preset Choose an fxp B Opens an effect bank Choose an fxb file to file to replace the current instrument replace the current effect bank preset Saves the current effect settings as a a Saves the current effect settings as a new effect new effect preset bank Playing a soft synth with a MIDI device 1 Double click a soft synth icon on a control 4 in the Mixer window The Soft Synth Prop
4. 2 Option Track Hold the Option Track Order button while pressing a button in the Settings Add New or Windows group for Order alternative functions Hold the Option Track Order button while pressing a the Channel lt or Channel gt button to change track order Hold the Option Track Order button while pressing F1 to F16 to perform custom functions you can define For more information see Configuring or customizing control mappings on page 245 3 Ctrl Hold the Ctrl button while using a control for alternative functions 4 Alt Hold the Alt button while using a control for alternative functions Audio Video buttons The Audio Video buttons control various audio and video settings for your project Aa aR om pe fe aa ii 5 o e VWOo0O00 0 OF l l 4 t WN AU O Item Description 1 Automation Press to place the controls on the Mackie Control in automation mode The controls in the channel section of the Mackie Control will affect the automation parameters on the track or bus if Automation Write Touch or Automation Write Latch mode is selected When the button is not selected the buttons control trim static values 2 Bypass FX Press to bypass enable all audio effects 3 Metronome Press to turn the metronome on or off 4 Surround Press to toggle the project properties between stereo and 5 1 surround mode 5 Downmix Press to toggle the state of the Downmix Output button in the Mixer window 6 Dim P
5. Byte Clipboard Clipping Codec Compression Ratio audio Compression Ratio file size Computer ID Crossfade DC Offset The tempo of a piece of music can be written as a number of beats in one minute If the tempo is 60 BPM a single beat occurs once every second The most elementary unit in digital systems Its value can only be 1 or 0 corresponding to a voltage in an electronic circuit Bits are used to represent values in the binary numbering system As an example the 8 bit binary number 10011010 represents the unsigned value of 154 in the decimal system In digital sampling a binary number is used to store individual sound levels called samples The number of bits used to represent a single sample For example 8 or 16 bit are common sample sizes While 8 bit samples take up less memory and hard disk space they are inherently noisier than 16 bit samples Memory used as an intermediate repository in which data is temporarily held while waiting to be transferred between two locations A buffer ensures an uninterrupted flow of data between computers Media players may need to rebuffer when there is network congestion A virtual pathway where signals from tracks and effects are mixed A bus s output can be a physical audio device in the computer from which the signal is heard Refers to a set of 8 bits An 8 bit sample requires one byte of memory to store while a 16 bit sample takes two bytes of memory to sto
6. Item Description 1 Left Right e Press the left or right arrow button to move left or right 1 32 note e Hold Ctrl while pressing the left or right arrow button to go to the beginning or end of the project e Hold Alt while pressing the left or right arrow button to go to the beginning of the next or previous measure 2 Up Down e Press to zoom in or out APPENDIX B 255 256 APPENDIX B Jog dial The jog dial allows you to navigate the timeline and trim events MACKIE ull n aaa an as ies a z ae ae pote smr oe gt y h i 4 i J 1 D A Ki N e iN t h e N d N t b l MUTE I Mure M Mure MUTE p o eS amp sx a nine oe a el a E O ee 710 eee i i o oj Navigating the timeline When playback is paused and the Scrub button is not selected the jog dial performs the following functions e Turn the dial clockwise or counterclockwise to navigate the timeline by 1 32 note e Hold Alt and turn the dial to go to the beginning of the next or previous measure Scrubbing the timeline During playback turning the jog dial increases or decreases the playback rate When playback is paused and the Scrub button is selected turning the jog dial scrubs the timeline Using a Frontier TranzPort Using a Frontier TranzPort you can control ACID wirelessly For more information see Connecting a control surface on page 241 Viewing the control mappings
7. The file is saved as a proprietary sfap0 file with the same name as the original media file and the same characteristics as the original audio stream The conversion happens automatically and does not result in a loss of quality or synchronization You can safely delete audio proxy files at any time since these files are recreated as needed PCM is the most common representation of uncompressed audio signals This method of coding yields the highest fidelity possible when using digital storage PCM is the standard format for WAV and AIFF files The correction of rhythms to align with selected note lengths or beats in a MIDI sequence A proposed standard for controlling broadcast of streaming media RTSP was submitted by a body of companies including RealNetworks and Netscape A metafile that provides information to a media player about streaming media files To start a streaming media presentation a Web page includes a link to a redirector file Linking to a redirector file allows a file to stream if you link to the media file it downloads before playback Windows Media redirector files use the asx or wax extension RealMedia redirector files use the ram rpm or smi extension A region is a section of time used to subdivide your project into segments The process in which the project is saved to a specific file format like WMA or MP3 The act of recalculating samples in a sound file at a different rate than the file was origin
8. Understanding clip types 40 Undo 49 All edits 49 Series of edits 49 Undo history 50 Using clips with tracks 107 Using the Clip Pool 109 Using the Mackie Control Universal 246 Video 205 208 Adding 205 Editing events 205 Frame numbering 205 Hiding showing 205 Removing 205 Removing associated audio 205 Scoring 207 Synchronizing with audio 205 Video Preview window 23 Video window 206 Voices Patch changes for DLS sets 145 VST instruments 146 Volume Automation 128 Event 71 Project 51 148 Track 20 48 Track envelopes 132 VST effects Preferences 234 VST Instruments Preferences 234 Index ix X Index VST instruments Loading banks and presets 146 Locating for use in ACID 146 Routing MIDI tracks to 148 Using 146 Wall of sound 263 What sThis help 16 Window docking area 22 Windows Audio Plug In 110 113 Audio plug in 23 Chopper 23 101 Docking floating 221 Explorer 22 36 38 Groove Pool 24 Hiding showing 221 Main 17 Media Manager 23 Mixer 23 51 53 141 152 Plug In Manager 24 Soft Synth Properties 23 Surround Panner 23 214 Track Properties 23 115 120 Video Preview 23 Working with tracks 46 Writing to CD 57 Understanding track at once and disc at once 57 Z Zoom controls Chopper window 101 Main window 22
9. Vol 6 0d8 m Pan Center j en Sg Envelope Beat 02 obey H O Vol 6 0dB li Pan Center SE Fx Ambient 03 H OQ Vol 6 0dB _ll Pan Center SD Drone ambient 001 Sk O vol 6 0 dB i Pan Center JI SB envelope Beat02 Bey HO Vol 6 0dB m Pan Center SE Fxambiento3 H O Vol 6 0d8 m Pan Center jI Stl t7 B O Vol 6 0dB u Pan Center If you copy events from tracks 1 and 3 and paste them into track 2 the event from track 1 is added to track 2 and a new clip is created for the new event A new track is created for the event from track 3 Copying clips across tracks without copying events You can use the Cut Copy and Paste buttons on the audio Track Properties or MIDI Track Properties window to cut copy and paste clips across tracks 1 Click the Paint Clip Selector button on the track header and select Clip Pool i Fiano A Sy T Yo 3 1 Bs E Touch Pan 100 L ajh AMERI AMERICAN FIANO PROMO DZ e AMERICAN FIANO PROMO 01 Mone Add Clip a 2 Inthe Clip Pool select the clip you want to cut or copy and then click Cut or Copy 3 Click the Paint Clip Selector button in the track header where you want to paste clips and then choose Clip Pool from the menu 4 Click the Paste button in the Clip Pool Previewing clips Select
10. Multipurpose slider This multipurpose slider allows you to control the following e The level of the track s signal being routed to each of the project s busses e The level of the track s signal being routed to an assignable effect control Each track s slider position is independent from the others however you can move sliders simultaneously by selecting multiple tracks before making your adjustment If you do not see this slider expand the track For MIDI tracks four multipurpose sliders are displayed to allow you to adjust MIDI controller data For more information see Controller automation on page 176 You may choose what the slider controls by clicking the slider label Changing the slider type for one track changes it for all tracks so you can compare levels of the same control across the project For more information see Adjusting the mix on page 48 Paint Clip Selector button Clicking the Paint Clip Selector button displays all the clips available for the track allows the user to add clips and opens the Clip Pool The Paint Clip Selector button shows the clip type icons Clip type icons Loo j One shot Beatmapped 2 MIDI if Loop button is selected in the Clip Pool MIDI if Loop button is not selected in the Clip Pool For more information see Adding clips to tracks on page 107 Track view In the track view you can view and edit the events in a track The area in which events displa
11. ae Erase Tool Help Generate MIDI Timecade eg 3 Generate MID Clack _ lt Remove on ae oe TE amp Extract Audio from CO amp Groove Erase Tool Separator kii Edit in Sound Forge 7 0 an 4 d 2 On the Current toolbar buttons pane select the button that you want to move and click Move Up or Move Down Move Down 3 Click Close to save the toolbar changes and close the dialog Adding buttons to the toolbar A series of buttons are included that you may add to the toolbar These buttons are listed in the Customize Toolbar dialog You may also add separators on the toolbar to organize the buttons to suit your preferences You may return the toolbar to its default settings by clicking the Reset button on the dialog 1 From the Options menu choose Customize Toolbar The Customize Toolbar dialog appears 2 On the Available toolbar buttons pane use the scroll bars to locate the button that you want to add and select it 3 On the Current toolbar buttons pane select the button that you want the newly added button to proceed in order For example if you want to add the Save As button and want it to precede the Publish button select the Publish button in the Current toolbar buttons pane Customize Toolbar E 2 x Available toolbar buttons Current toolbar buttons Separator Peset ese Save cs e Add gt CES Help Ih Render As Ex Project Properties pr W Delete lt R
12. e Right clicking a media file in the Search Results pane and choose Add to Project from the shortcut menu The file is added to the bottom of the track list If the file is offline you ll be prompted to locate the file or choose a replacement For more information see Resolving offline media files below Resolving offline media files An offline media file is a file that is no longer available to the Media Manager Media may be classified as offline if you eject removable storage after adding a file to your library or change a file s name or location 1 Add media to your project or preview media files If any of the files are not accessible the Resolve Offline Media dialog is displayed with a listing of offline files and their status Icon Status Description amp Offline The file listed in the Offline File column cannot be found The status will be Offline if you did not search or browse for a replacement file af Probable The file listed in the Offline File column will be replaced by the file listed in the Replacement Match File column A status of Probable Match indicates that the Media Manager tool found a likely replacement file when you clicked Smart Search Icon Status Description y Found The file listed in the Offline File column will be replaced by the file listed in the Replacement File column A status of Found indicates that you chose the file you want to use after clicking the Browse button 2 Select the files you w
13. s time value The value that you enter at the cursor position affects all time values that precede and follow it Using the project grid The project grid appears on the track view and is mainly used to align the events in your project The grid divides your project into equal units based on the setting that you choose The grid setting can be based on the project type or how you prefer to work APPENDIX A 223 224 APPENDIX A It is important to remember that in some cases the grid lines and the ruler divisions do not match This is because they are two independent functions However you may set the grid to align to the ruler which is the default setting The grid can use the following formats Ruler Marks 16th Notes Measures 16th Note Triplets Half Notes 32 Notes Quarter Notes 32nd Note Triplets Quarter Note Triplets 64th Notes 8th Notes 64th Note Triplets 8th Note Triplets Setting the grid type You may change the grid type at any time and apply it to your project There are two ways to set the grid type for your project e From the Options menu choose Grid Spacing and choose the type of grid you want from the submenu e Right click the marker bar choose Grid Spacing from the shortcut menu and choose the type of grid that you want from the submenu Using the toolbar The toolbar is set to display below the menu bar However you may hide and customize the toolbar to suit your preferences The settings that you
14. 46 Windows 222 Reversing events 63 ReWire 152 ACID asa device 154 ACID as a mixer 153 ReWire panel applications Inserting as soft synth 153 Locating for use in ACID 153 Opening 153 Ripping tracks from CD 38 Ripple editing 67 Cutting events 67 Deleting events 68 Pasting events 69 Ruler offset 223 Sample rate 35 Saving Plug in packages 112 151 Presets 149 Projects 54 Track properties to media files 120 Scoring video 207 Search pane Autohiding 85 Automatically hiding 85 Searching for media files By keyword 81 Index vii viii Index Media Manager 81 Using tags 82 Sections Adjusting length 72 Adjusting the length 72 Arranging a project 72 Changing color 73 Clearing all events 74 Copying 73 Deleting 73 Inserting 72 Moving shuffling 73 Moving a label 73 Removing a label 73 Renaming 72 Trimming 72 Selecting events 44 46 Selecting notes 169 Setting the active clip and creating events 107 Setting up a control surface 241 Setting up a Mackie Control Universal 242 Shortcut keys 24 Signal flow Audio 31 32 MIDI 33 34 Sliding Events 70 Video events 206 Slipping Events 70 Video events 206 Slip trimming Events 70 Video events 206 Snapping 94 In the Chopper window 101 To scale 190 Soft synth controls 144 152 Adding 144 Assigning tracks to 148 Deleting 147 Modifying properties 144 Routing to DLS sets 145 Routi
15. A file added without the Beatmapper behaves as a one shot maintaining its original length regardless of the project tempo 1 Add the file to your project The Beatmapper Wizard starts if the file is longer than 30 seconds Note You can change the file length that triggers the Beatmapper in the Audio tab of the Preferences dialog For more information see Using the Audio tab on page 230 2 Specify whether you want to use the Beatmapper Wizard Select the Yes radio button and click Next to detect measures and downbeats Select the No radio button and click Finish to close the Beatmapper and add the file as a one shot 3 Click the Play button E to verify the downbeat marker s position If the marker is positioned on a downbeat click Next Otherwise drag the marker to the appropriate location and click Next The Beatmapper draws the file s waveform and places a region to indicate the length of the first measure Tip The Reset button sets the downbeat marker back to its detected position 4 Click the Play button E to verify the measure s length Select the Metronome check box to preview the measure with the assistance of a metronome e Click the Halve Loop Region or Double Loop Region _ button to change the length of the selection If the Beatmapper misdetects the length of the measure it may be off by either half or double the actual amount e If the region is positioned correctly click Next Ot
16. An overlay is available from Mackie that you can use to label the buttons and controls with their mapped functions in ACID For more information see Using the Mackie Control Universal on page 246 Configuring a Frontier TranzPort Using a Frontier TranzPort you can control ACID wirelessly For more information see Using a Frontier TranzPort on page 256 Configuring a generic MIDI controller You can configure up to five generic MIDI control surfaces to work with the ACID interface For information about your specific device please refer to the manufacturer s documentation For more information see Configuring a generic MIDI controller on page 258 Chapter 12 Working with Video By adding a video track to your ACID project you can use the software as a scoring tool Video is always added to the top track in the track list Depending on your horizontal zoom level each frame displayed in the video track may represent multiple frames from the source video As you zoom in marks display to represent each frame and you can zoom further to view individual frames Managing video ACID makes it easy to add video to a project and work with the video track Adding or replacing video files Use the Explorer window to find the file you want to use and then add it to the project by double clicking it or dragging it into the track view The video file is placed in the top track and if the file has an audio stream it is placed as a separ
17. Click Yes to clear the edit histories or No to retain the current edit histories Playing the project You have several methods for playing your projects Using the transport bar All buttons required to play your project are located on the transport bar The transport bar should look somewhat familiar to you as it contains buttons found on most home CD and cassette players For more information see Transport bar on page 21 Using playback options As you build a project you will likely have different playback needs For example you may want to hear the project in its entirety when checking the final mix but not when you are working on the ending Because of this you have three playback options e Playing the entire project e Playing from the cursor position e Playing in looped playback Playing the entire project To begin playback from the beginning of the project click the transport bar s Play From Start button or press Shift Space To stop playback click the transport bar s Stop button m or press Space Playing from the cursor position To begin playback from the current cursor position click the transport bar s Play button or press Space To stop playback click the transport bar s Stop button m or press Space Playing in looped playback You can also limit playback to a specific loop region on the track view This playback method uses the transport bar s Loop Playback button and allows you to f
18. Filtering continuous controller messages allows you to control exactly which continuous controllers are recorded For example if you wanted to make sure you didn t accidentally record modulation automation by bumping your keyboard s modulation wheel you could select the Record unselected items radio button choose Continuous Controllers from the MIDI Message Type drop down list and then select the Modulation check box e Excluding system exclusive messages during recording can improve performance during real time recording and when using MIDI thru Setting up MIDI velocity input filters Track Properties ml Stephanie Output Settings Input Filters clip Pool Enable Message Filter Velocity Quantize b O O C Change Release Velocity Change type Invert Set to Add O Secale by O Limit e a Use the Input Filters tab to modify or limit note on and note off velocity from a track s MIDI input device during recording 1 Select the track where you want to apply the filter In the Track Properties dialog click the Input Filters tab Choose Velocity from the drop down list at the top of the page Select the Enable check box eS Select a check box to indicate whether you want to edit note on or note off velocities Item Description Change Start Velocity Select this check box to edit note on velocities Change Release Velocity Select this check box to edit note off velocities
19. Moving the insert position in the track view 1 ccc ccc ccc cece cece eee eee eee eeeees 105 Saving Chopper selections as new fileS cece cece cece eee eee eee e teen eeeeees 105 Using the Chopper with one shots ccc ccc ccc cece eect eee eee ee eeeeeeees 106 WOKING WIA TraCKS cunsobucictuauuhecenedcawsanascisses es AN 107 Using Clips WIT tracks ssi ducve iad 400d bec dieu diwcces URENT EVEA een once 107 Adding GDS TO UACKS Gidiiaunin cer dissi irsini err cede ives NT 107 Using track eNe 5 sx2056ssenuevsinne a EAE aa aaa 110 Using rack enects chewontemcdk ea ieopencsuaeie cvtuetuasadasewedabeonnetneereced ue taeeteases 110 Creating or adding to track plug in Chains cece eee cece e teen eee e eee enenees 111 Arranging plug in chain order ccc ccc ccc cece eee eee e eens nee neeeeeeeeseeeeeeees 112 Bypassing plug ins IN a CHAIN 1 ec cc ee eee ee e eee e eee e eee e eee eeeneees 112 Bypassing effect AUTOMATION cece cece cece RESNI eee e eee e eee TENER 112 Removing plug ins from Chains ccc cece ccc eee eee e eee eeeennees 112 Saving plug in Chains as packages eee eee ee ee eee ee ee eee teen eeeeees 112 Removing or bypassing all effects ON tracks ccc cece eet eee eee e eee e eens 113 Using track automation ENvelOPeS cece cc ccc ccc eect eee e eee eeeeeees 113 TABLE OF CONTENTS 5 6 TABLE OF CONTENTS Choosing stereo parn types uss iupswceowscsua
20. Note f you have preset plug in chains saved double click the Packaged Chains folder to view those presets For more information see Saving plug in chains as packages on page 151 3 Click OK The Plug In Chooser dialog closes The Audio Plug In window opens and displays the plug in chain Click a specific plug in and adjust the effect s parameters manually or choose one of the presets from the Preset drop down list For more information about effect parameters click the Plug In Help button in the Audio Plug In window Tip You can save an effect s parameters as a preset to be used in other projects To save a preset enter a name in the Preset box and click the Save Preset button 5 Click the Close button XJ to close the Audio Plug In window Working with assignable effects chains After you add an assignable effect control you can add plug ins to the chain and modify them as needed For more information see Adding effects to soft synth mixer controls on page 149 Routing tracks to assignable effect controls Routing tracks to an assignable effect control allows you to assign multiple tracks to a plug in chain 1 Click the multipurpose slider label and choose the desired assignable effect control from the menu that appears The slider changes to reflect the name of the assignable effect control c f Sound Fx 7 Sh il vo 8 4dB x a Touch gt Pan 20 R io J CIMEM Fi 42d Multipu
21. Once you add a soft synth control to your project you can use the Soft Synths Properties window to change the DLS VSTi or ReWire 2 0 soft synth used by the control or you can configure soft synths for external input from a MIDI controller Soft synths that are routed to VST instruments or ReWire 2 0 panel applications inherit voicing information Soft synths that are routed to the DLS DirectX soft synth can be voiced using DLS or DLS 2 files Accessing the Soft Synth Properties window You can display the Soft Synth Properties window by double clicking the soft synth icon on a Mixer control 2 or by right clicking the icon and choosing Soft Synth Properties from the shortcut menu Changing the soft synth control routing 1 Double click the soft synth icon on a control 2 The Soft Synth Properties window appears 2 Click the Edit Soft Synth button Edt Soft synth The Soft Synth Chooser dialog appears 3 Choose a soft synth type by e Routing the soft synth control to a DLS or VSTi soft synth by clicking the Soft Synths tab and choosing an available soft synth from the list OR e Routing the soft synth control to a ReWire device application click the ReWire Devices tab and choose an installed ReWire 2 0 device from the list 4 Click OK to return to the Soft Synth Properties window If you selected a VST instrument the VSTi synth is displayed in the Soft Synth Properties window and you can adjust the controls as ne
22. Preparing to record Before you record you must arm the tracks into which you will record the new audio You must also select the recording settings for the tracks You have the additional options of using a metronome or turning off playback during recording You may record into an empty track a time selection an event or a combination of time and event selection You can also record multiple takes for an event so you can maintain multiple versions of an event that you may play back and edit Arming the track for recording Whether recording into an existing track an empty track a selected event or a time selection you must prepare a track for recording You can arm multiple tracks prior to recording Click the Arm for Record button in the track list Once a track is armed a record meter appears in the track list Depending on your hardware a record gain fader may also appear Bass Groove ike Bass Gro p ote O Bass Gro p HOI vo 60d j ftoh D 7 Elis a T 27 Pan Center 1 mie Rise Vol 6 0dB ii Pan Center j 3 Vol 6 0dB ii Pan Center 41 3 Arm the track first Track is ready for recording Track is ready for recording using the Sound Mapper from a specific device In addition one of two Record Device Selector buttons appears or 1 The button that appears is based on the Audio device type selected in the Audio tab of the Preferences dialog For more inf
23. Right Selecting recording settings for the Windows Classic Wave Driver or an ASIO device 1 Click the Record Device Selector button 1 A menu appears 2 Choose either Stereo or Mono from the menu 3 From the submenu choose the input device tasc 1 Oke SO 1 Input Monitor Vol 6 00dB i x Stereo t Default Input 4udioFire 1 4udioFire 2 Mono j Input 1 4udioFire 1 4udioFire 2 Input 2 4udioFire 3 4udioFire 4 Input 3 4udioFire 5 4udioFire 6 Input 4 4udioFire 4udioFire 8 Input 5 4udioFire 9 4udioFire 10 Using the metronome A built in metronome marks time to help with the timing and tempo when recording a performance The metronome s sound is not mixed in the final rendering of the project Use the Preview fader in the Mixer window to control the metronome volume To use the metronome from the Options menu choose Metronome ia Recording You may record into an empty track a time selection an event or a combination of time and event selection The recording is added to the timeline as new clip and is saved to a media file on your hard drive Notes e Recorded files are in the folder specified on the Folders tab of the Preference dialog by default If you want to choose a project specific folder you can use the Recorded files folder box on the Audio tab of the Project Properties dialog For more information see Using the Audio tab on page 230 e You can use the ACID t
24. The device is added to the Active control devices list Double click the entry in the Active control devices list to display the configuration dialog For information about configuring specific MIDI controllers see Setting up a Mackie Control Universal on page 242 Using a Frontier TranzPort on page 256 or Configuring a generic MIDI controller on page 258 Using your control surface This section describes how to use your control surface in general terms For information about your specific device please refer to the manufacturer s documentation 1 2 3 From the Options menu choose External Control to enable your selected control surfaces If necessary press the Automation button on your control surface Click the Automation Settings button for each track you want to edit with the control surface and choose Automation Write Touch or Automation Write Latch to enable automation recording For more information see Automation recording modes on page 136 To enable automation recording for audio busses and soft synths use audio bus tracks Use the functions on your control surface to edit your project Setting up a Mackie Control Universal The Mackie Control is fully supported by ACID software and lends a tactile element to your editing sessions There are many overlays available that you can use to label the Mackie Control buttons and controls with their mapped functions in ACID For more information about Mackie Contro
25. The map for the TranzPort assigns the controls as follows Control Track Track H Rec Mute Solo Undo In Function Shift Function Focus to previous track or Insert audio track mixer control Focus to next track or mixer Insert MIDI track control Arm track for record Mute track Solo track Undo Redo Set loop start Control Function Shift Function Out Set loop end Punch Toggle metronome Toggle MIDI merge recording when displaying volume or panning for a MIDI track Press Track 4 or Track to select a MIDI track Press Shift Loop until volume or panning information is displayed on the TranzPort Hold Shift and press Punch For more information see Using MIDI merge recording on page 166 Loop Toggle looped playback Toggle jog wheel control of volume panning input or output device for tracks or Mixer controls Press Track or Track to select the track you want to adjust Press Shift Loop until the item you want to edit is displayed on the TranzPort Hold Shift while rotating the jog wheel to adjust the selected control Shift Toggle alternate functions Markers Move to previous marker Prev Markers Insert marker at cursor Add Markers Move to next cursor Next Jog Wheel Scroll cursor Adjust volume or pan for current track 44 Rewind Go to start H Fast forward Go to end Stop playback or recording Play pause m Punch in or start recording Adjusting track or bus volu
26. The transport bar contains the playback and cursor positioning buttons frequently used while working on your project Record new track gg Pause resume project playback Loopplaybak gt Stop playback Play from beginning of project A Move cursor to start of project Play project from cursor position P Move cursor to end of project R Midisteprecord MIDI merge record The software also includes keyboard shortcuts for these playback commands For more information see Playback commands on page 28 INTRODUCING ACID SOFTWARE 21 Zoom controls To the right of the horizontal scroll bar are the time zoom controls Clicking the Zoom In Time button increases the horizontal magnification of the project To decrease the level of magnification click the Zoom Out Time button Directly below the vertical scroll bar are the dedicated track height zoom controls Clicking the Zoom In Track Height button increases the vertical magnification of the project To decrease the level of magnification click the Zoom Out Track Height button Note Double clicking the horizontal or vertical scroll bars adjusts the magnification so that as much of the project either horizontally or vertically is displayed as possible Click the Zoom Tool button amp in the corner of the track view to temporarily change the cursor into the Zoom tool After you select an area of the track view to magnify the cursor reverts to the
27. Tip Double click the tempo value next to the Project Tempo slider to enter an exact value Press Enter when you are finished As you drag the Project Tempo slider a colored bar appears under each track s name to represent the amount a track is being stretched to match the project tempo The mark in the center of the bar represents the original tempo of a file When the bar appears to the right of the mark the project tempo is faster than the original file when the bar appears to the left of the mark the project tempo is slower than the original file The amount of change also displays as a percentage at the right end of the bar As you drag the slider a colored bar appears for each track E piffage h amp 6 Project tempo is faster than J a t fie tempo vol 13 1 dB i Pan Center amp S Hyperfuzz amp O Project tempo is slower ee 2 4 than file tempo Vol 6 0dB il Pan i5 L i g Hyperfuzz 02 Ohk amp O aaa uf Fb vol 6 0 dE l Pan Center LU Wt 105 982 4 py 4 y BPM 4 f Project Tempo slider Changing project tempo to match file tempo Each track s shortcut menu contains the option Use Original Tempo The original tempo of the file used on the track appears to the right of this option in the shortcut menu To change the project s tempo to match the original file tempo simply choose Use Original Tempo from the shortcut menu Changing project t
28. You enter the text that displays during playback Note To view captions during playback in Windows Media Player 9 choose Captions and Subtitles from the Windows Media Player Play menu and then choose On if Available from the submenu Displays the entered text in the captioning window defined by an HTML layout file Displays the entered text in the text window defined by an HTML layout page Displays the entered text in the headline window defined by an HTML layout file Displays the entered text on the player s title bar Note When rendering Windows Media files title information is based on the settings on the Summary tab of the ACID Project Properties dialog or the Index Summary tab of the Custom Template dialog The summary information from the Project Properties dialog will be used if information has been specified in both places To view this information during playback choose Now Playing Options from the Windows Media Player View menu and select the items you want to display Displays the entered text author s name when a user selects About this Presentation from the RealPlayer shortcut menu or Properties from the Windows Media shortcut menu Note When rendering Windows Media files author information is based on the settings on the Summary tab of the ACID Project Properties dialog or the Index Summary tab of the Custom Template dialog The summary information from the Project Properties dialog will be used if informati
29. and the envelope keyframe is dimmed to indicate that it is unavailable Read The envelope keyframe value is applied during playback and the control reflects the envelope keyframe settings at the cursor position Adjustments to the control are not recorded Automation Write Touch The envelope keyframe value is applied during playback and the control follows the envelope keyframe settings during playback and when you position the cursor Envelope points or keyframes are created only while a control is being adjusted When you stop adjusting the control automation recording stops and the existing envelope points keyframes are unaffected Mode Tracklcon Description Automation Write Latch y The envelope keyframe value is applied during playback and the control follows the envelope keyframe settings during playback and when you position the cursor Envelope points or keyframes are created when you change a control setting and recording continues until you stop playback When you stop adjusting the control the control s last setting overwrites the existing envelope points keyframes USING AUTOMATION 139 140 Chapter 8 Chapter 9 Using the Mixer In the Mixer window you ll manage the project s busses assignable effects and soft synth controls In this chapter you ll learn how to add each of these controls to the mixer and route individual tracks to them You ll also learn about working with the mixer controls including a
30. cece cece ccc cece eee e nett eeeeees 71 MU SIFIC SCCUIONIS ccs cory cc cureu ce pe tue EEE aaah sb ees bo eae be eo wie he oe eee eee comes 72 MSN 2SCCUOMN sasar Erer IEEE E E henry EAA E EEA AEREE ARIE A 72 Adjusting a section s length ccc ccc cece cece i a a a aea 72 Renammnag a seo Senco reopens ceases a eka anes ENA deena aaa eee eae see 72 Changing a sections COlON erescersseeire aden win eine OTTAEN SEEEN ENEE ENEE 73 Moving shuffling sections sesssusussesusuesesesueresesuerererserereeseserrererees 73 Ea EEE Sa E T E E E E E E E E E E 73 Deleting asedion say owe satuncewouw vue ed iewoue ytse stuns sadwa eevee eeaukewe en eaaetiewous 73 Moving asection label ccc cee eee eee eee teen eee e eee e eee e eee e eee eeeeeeees 73 REMOVING 2a SECHONIGDE accscresewseessneepsucaacusnss ens nawkae ed Condes dOeweeKenseae eos 73 Clearing all events from a SECTION 10 ccc ccc eect een n eee e eee teen eeeeeneeeaes 74 Using the Media Manager ccc cece cece cece eee e ence eeeeeenees 75 Creating anew Media library ccc ccc cece eee ence eee eee e eee e eee eeeeens 75 Opening a Media library ccc cece eee ence e eee e eens eeeeeeees 75 Adding media files to a library ccc ccc ccc cc cece ete eee eee e nee eeeenee teenies 75 Removing media files from a library cece ccc cece cece cece eee e eee eeeeeeeees 77 Tagging media FES care dice worse erosi ccied rr ere cent eanawdenmebsnca
31. or sharp that are used to raise or lower the volume over time Right click the fade region select Fade In Type or Fade Out Type from the shortcut menu and choose the appropriate fade curve from the submenu Using sections With sections you can create different arrangements using simple drag and drop operations Each section header above the timeline represents a segment of your project When you drag a section header to a new location of the timeline all events envelopes regions markers and commands within the section follow Intro Vere 1 Chorus Meret aa Pushing Riff 01 13 F SOR ORO ORO ROO ROR ROO ORO ROOD da Hyperfuzz 01 TA TA Inserting a section 1 Create a time selection that includes the portion of the timeline that you want to use as a section 2 From the Insert menu choose Section or press Shift S A section label is added above the marker bar 3 Type a name to identify the section and press Enter Adjusting a section s length 1 Hover over the end of a section label The mouse pointer is displayed as a 2 Drag the end of the section to extend or shorten it Tips e Hold Shift to override snapping As you drag the edge between two adjacent sections both will be adjusted simultaneously Renaming a section 1 Right click the section label and choose Rename from the shortcut menu The section label changes to an edit box Tip Press F2 to rename the selected section
32. pitch shift is calculated after the project key and any pitch shift assigned to a track For more information see Changing tempo time signature and key on page 95 Quick fade edges to When you add an offset to an event so that it does not end on a loop point prevent clicks you can introduce an audible click at the edges of the event Select the Quick fade edges to prevent clicks check box and a quick fade in or fade out is performed on the event edges To adjust a quick fade zoom into the event and hover over the upper left or upper right corner of an event until the cursor is displayed as Drag the edge of the fade to adjust its duration For more information see Setting an event s fade in and out envelope curve on page 71 Reverse Select the Reverse check box to reverse the event s audio and peak data An arrow appears on the event in the timeline to indicate that it has been reversed Using event envelopes You can use envelopes on individual events Envelopes give you the ability to control each event s fade in fade out and overall volume Envelopes are useful for transitional effects between events by subtly fading out one event s volume while another fades in These envelopes are different than track envelopes because they affect only the event whereas track envelopes can affect multiple events on the track For more information see Using track automation envelopes on page 113 The event s volume level and fade cur
33. see From the Options menu choose Preferences to display the Preferences dialog on page 227 Adding media files from the Explorer window You can use the Explorer window which operates similarly to the Windows Explorer to locate media files for use in projects Display the Explorer if needed by choosing Explorer from the View menu or by pressing Alt 1 GETTING STARTED 37 38 Chapter 2 There are three ways to add media files from the Explorer window e Double click the desired file e Drag the file from the Explorer to the track view or track list Dragging a file from the Explorer to the track name of an existing track allows you to replace the original file with the new file while all events remain in place e Right click and drag a file to the track view or track list to specify the type of track to be created When you drop the file a shortcut menu appears that allows you to choose whether to treat the file as a loop one shot Beatmapped track or as an autodetected type Adding MIDI files from the Explorer window You can add MIDI files to your project just as you would add audio files You can right click a MIDI in the Explorer window you can choose how you want to add it to your project Add to Project Add to Project with Events Add to Project with Events Rippled Open as New Project For more information see Adding MIDI files to a project on page 163 Adding media files from the Media Manager window If y
34. up to increase the note s velocity or drag down to decrease velocity If multiple notes are selected the velocities of all selected notes are adjusted at the same time Sell the Sizzle Tips e Double click the top of a velocity stem to set the note s velocity to the default value 64 e Right click a note and choose Velocity from the shortcut menu You can then choose a command from the submenu to set the note on velocity If multiple notes are selected you can edit the velocities of all selected notes simultaneously Processing and filtering MIDI events From the Edit menu choose MIDI Processes and Filters to apply destructive editing to MIDI events on the timeline You can quantize data in events edit velocity values change the duration of an event or transpose MIDI data Quantizing MIDI events 1 From the Edit menu choose MIDI Processes and Filters The MIDI Processes and Filters dialog is displayed 2 Select the Quantize tab MIDI Processes and Filters Quantize velocity Duration Quantize Start Quantize Release Preserve Duration Luantize grid o J J pla A 2 C Tuplet in time of Offset by Zz ticks Options Swing Oo Strength io 3 Select your quantization options Item Description Quantize start Select this check box to force the beginning note on messages of MIDI events to a specified resolution on the grid Quantize release Select this check
35. you can move events and envelopes independently Using the piano roll editor The piano roll editor is an OPT plug in that you can use to create and edit note events within the Clip Properties window for a MIDI clip The top pane of the piano roll editor displays note information like a sequencer or a roll from a player piano Each note is represented by a rectangular note event of a certain length and pitch The piano keys along the left side of the window indicate the pitch of a note event The beat ruler across the top of the window shows the length and location of a note event The lower pane of the piano roll editor displays velocity information for each note event A transport bar for previewing MIDI appears at the bottom of the window Viewing the piano roll editor 1 Double click the MIDI icon on the track header to open the Track Properties window 2 Select the Clip Pool tab in the Track Properties dialog 3 Double click one of the listed clips to open the Clip Properties dialog 4 Click the Piano Roll Editor tab The piano roll editor appears Clip Properties T Hip U S Rebels ans Ral EE List Ector RW y RF f w A Tease Ls 1 1 000 3 a ax 5 3 i A i 4 1 f 1 1 1 pi 1 1 4 a o a za Oo o p i b m Pitch and length C 0 1 f I l l j plel Velocity gt gt il WP Middle C Transport bar WORKING WITH MIDI 187 188 Chapter 11 Previewing MIDI You can prev
36. 2 Type anew name in the edit box 3 Press Enter Changing a section s color 1 Right click the section label and choose Color from the shortcut menu 2 Choose a color from the menu The color of the section header is updated but event colors do not change Moving shuffling sections Shuffling sections allows you to move all events envelopes regions commands and markers within a section in a single operation For more information see Ripple editing on page 67 1 Drag a section label to a new position on the timeline A I is displayed to indicate where the section will be moved 2 When you drop the section events are split at each end of the section and all events within the section are moved to the position where you dropped the section Downstream events ripple to make room for or fill the space of the section you dragged 3 k F k 105 1 113 1 ilzi l lets ail Notes e Hold Ctrl or Shift to select and shuffle multiple selections e When shuffling envelope points the shape of the envelope is copied to the new location and additional points are created at each end of the section if necessary The tempo time signature and key of the section will be preserved during shuffling and tempo time signature and key markers will be created if necessary Copying a section Copying sections lets you copy all events within a section in a single operation For more information see Ripple editing on page 67 1 Hold Ctr
37. ACID for the first time Additional windows can be displayed by clicking the window s tab or by choosing the desired window from the View menu Tip You can quickly hide or show the window docking area by pressing F11 The available windows can be docked anywhere at the bottom of the ACID window or floated over the ACID window or on a secondary monitor this setup requires a dual monitor video card You can also create floating docks anywhere by dragging more than one window to the same area Explorer window The Explorer window works similarly to the Windows Explorer You can use the Explorer window to locate preview and select media files to be added to your project You can also use the Explorer window to perform common file management tasks such as renaming files or creating folders Display the Explorer by choosing Explorer from the View menu or pressing Alt 1 22 Chapter 1 Chopper The Chopper isolates audio events so that you can dissect them and reinsert them into a project to produce elaborate slice n dice effects with minimal effort Display the Chopper by choosing Chopper from the View menu or pressing Alt 2 For more information see Using the Chopper on page 101 Mixer The Mixer window provides access to output levels as well as soft synth controls and the project audio properties Display the Mixer by choosing Mixer from the View menu or pressing Alt 3 For more information see Using the Mixer window on page 51
38. Arm for Record button on the desired track s 2 Select the event to record into Tip You may record into multiple events by pressing Ctrl and making your selections 3 On the marker bar drag a time selection You may adjust the time selection by dragging the selection bar s starting and ending points Make the time selection start before the event for a pre roll 4 Click the Record button on the transport bar to begin recording If input monitoring is turned on the track s original audio is played until the cursor reaches the selected event When the cursor plays through the selected event you ll hear your recording input and the track s original audio is played again when the cursor moves past the selected event Using pre roll The previous technique allows you to define the playback region with a time selection and sets the punch in and punch out points in the recording to the event boundaries When you click the Record button playback begins at the beginning of the time selection The event is then filled with the newly recorded material The audio file that is recorded to your hard disk is the full duration of the time selection The event only contains a portion of the full recorded performance and can therefore be trimmed both shorter and longer and repositioned within the event L selection bar defines the recorded 00 00 04 000 3 OUUU or ee a EM Bass G 1 om O a audio file s duration p
39. Beatmapper Wizard The file is added to the project as a Beatmapped track 9 Draw the event in the track view Tip You can place the entire event by using the Paint FA tool With the Paint tool selected press Ctrl while you click once in the track to place the Beatmapped file Understanding stretching properties All loops on the ACID installation disc as well as all loop collection CD ROMs contain stretching properties This means that tempo and key information is stored in the loops allowing the application to accurately perform its time stretching compressing and pitch shifting functions on these loops when placed in a project Keep in mind that you do not need to designate stretching properties for loops that you create for ACID projects The application typically makes an accurate estimate regarding the loop file s tempo In addition you can temporarily assign a root note to the file to allow it to be transposed to the project s key However when creating custom loops for use in multiple projects you should define stretching properties You can set the stretching properties for loops and Beatmapped clips For more information see Adjusting stretching properties for loop or Beatmapped clips on page 116 Configuring track properties From the View menu choose Track Properties to display the Track Properties window The contents of the Track Properties window reflect the currently selected audio or MIDI track If you want to e
40. CD dialog indicates the amount of time that the current project will fill on the CD as well as the total amount of time remaining on the CD If the Time needed for audio value exceeds the Time available on disc value you are not allowed to write the track to the CD Note f there is no CD in the CD R CD RW drive only the Cancel button is available in this dialog 3 Choose a setting from the Action drop down list Choose Burn audio to begin recording audio to your CD when you click Start You must close the disc before it can be played in an audio CD player Choose Test then burn audio to test whether your files can be written to the CD without encountering buffer underruns Recording begins after the test if it is successful Choose Test only to test whether your files can be written to the CD without encountering buffer underruns No audio is recorded to the CD Choose Close disc to close your disc without adding any audio when you click Start Closing a disc allows your files to be played on an audio CD player You cannot add tracks to a CD once it has been closed Choose Erase RW disc to erase a rewritable CD when you click Start 4 Select your burning options Select the Buffer underrun protection check box if your CD recorder supports buffer underrun protection Buffer underrun protection allows a CD recorder to stop and resume burning Buffer underrun protection can create a disc that can be played in CD players but may contain a
41. Classic Wave Driver a DirectSound driver or an ASIO driver as your audio device Then you can choose the appropriate hardware device in the Mixer window 1 From the Options menu choose Preferences and click the Audio Device tab 2 From the Audio device type drop down list choose Windows Classic Wave Driver or an ASIO driver 3 Click OK to close the Preferences dialog Note f you have chosen Microsoft Sound Mapper in the Audio device type drop down list on the Audio tab you cannot assign the bus to a different device 4 Inthe Mixer window click the Playback Device Selector button on the bus you want to route 5 Choose a hardware device from the menu that appears Deleting busses Just as you can add busses to a project at any time you can also delete superfluous busses When you delete a bus from a project tracks assigned to it are reassigned to the Master bus Deleting a bus Right click the bus in the mixer and choose Delete from the shortcut menu Deleting multiple busses 1 Display the Project Properties dialog using one of the following methods e Choose Properties from the File menu e Press Alt Enter Click the Audio tab Enter a value in the Number of stereo busses box and click OK The busses are removed from the Mixer window Using assignable effects You can use assignable effect controls to send various levels of multiple tracks to a single effect chain Like busses these controls reside in the Mixer
42. Click the Hide all Envelopes button at the bottom of the window to hide all envelopes on the bus track Reset All If the parameter has an automation envelope you can click the down arrow and choose Reset All Envelope Points Envelope Points to restore all points to the default value Click the Reset all Envelopes button at the bottom of the window to set all points on all envelopes on the bus track to the default value WORKING WITH MIDI 185 Delete Envelope f the parameter has an automation envelope you can click the down arrow and choose Delete Envelope to remove the envelope and all envelope points from the timeline Click the Remove all Envelopes button at the bottom of the window to delete all parameter envelopes on the bus track 5 Clickthe down arrow inthe Curve Type box to set the default fade curve for each parameter s automation envelope The new curve type will be applied to all envelope segments You can right click a segment and choose a new fade curve to override the default curve type Editing parameter automation envelopes You can edit mute automation settings by adding an envelope to the bus track or by using the controls in the Soft Synth Properties window For more information see Modifying soft synth control properties on page 144 1 Select the Automation Settings button wy 2 Click to position the cursor in the timeline where you want to edit a parameter 3 Youcan adjust automated parameters by
43. Electric cutar 03 E e k OQ Pa Surround Panner xi vol 12 0d8 uj Electric Guit Double click to display Electric Guitar 03 Trim BB Electric Guitar 04 El ee Y the Surround Panner vol 12 0d8 j Electric Guit oo g Electric Dulcim E e Ae vol 14 0 dB i 2 Electric Dul g Electric Dulcim A ees A G vol 14 0 dB il ci Electric Bul Sia Organ OBNS O 100 m cente _ gt 3 5H T A gt LFE m a ee p Daaa aaa a 1 S E ES aSa K Add Channels 0 dB Center 3 Adjust the panning settings For more information see Using the Surround Panner window on page 214 WORKING WITH 5 1 SURROUND 213 214 Chapter 13 4 Close the Surround Panner window Tip You can also use the surround panner in the track header to pan your track Panning mixer controls You may choose to route tracks to busses or other mixer controls such as soft synths or assignable effect chains and pan them as a group rather than panning each track individually Note When you route a track to a bus or soft synth control stereo two channel output is sent to the mixer control and the mixer control sends 5 1 six channel output to the Surround Master bus 1 Adda mixer control to the project For more information see Using the Mixer on page 141 2 Route tracks to the mixer control For more inform
44. Fading in out Events 71 Mixer controls 152 Tracks 113 136 Film panning model 216 Filtering MIDI 173 Filtering MIDI events In the list editor 192 Fitting to time 99 Flipping envelopes 133 Floating windows 222 Folder tracks 41 124 Adding tracks 125 Creating 125 Editing events 125 Muting 125 Removing tracks 125 Soloing 125 Frame numbering 205 Frontier TranzPort 241 Adjusting panning 257 Adjusting volume 257 Editing input device 257 Index iii iv Index Editing output device 258 Viewing control maps 256 General preferences tab 228 Generic control surface setup 204 256 258 Generic controller 241 Generic MIDI controller Custom control maps 258 Loading control maps 259 Setting up a generic control surface 259 Getting media from the Web 40 Glossary 269 Go to 44 Gracenote Obtaining or editing CD information 39 Grid 223 Groove Pool window 24 Hardware Playing MIDI from 197 Routing busses to 141 Routing MIDI tracks to 196 Routing surround to 211 Routing video to 207 Setting up for surround 210 Help 15 Hiding showing Bus tracks 152 Toolbar 224 Track envelopes 135 Video tracks 205 Windows 221 Icons Color intensity preferences 238 Tinting preferences 238 Increments Creating 104 Creating a custom musical length 105 Creating a specific musical length 104 Inline MIDI editing 167 Input filters 179 Inserting sections 72 Inserting
45. Note Before rendering your surround project check your surround authoring application s documentation to determine its required audio format with respect to the LFE channel For more information see Setting up surround projects on page 210 From the File menu choose Render As The Render As dialog appears From the Save in drop down list choose the drive and folder where the file will be saved Enter a new name for the project in the File name box A WN From the Save as type drop down list choose the desired file format AIFF or WAV If you have the Sony AC 3 Encoder you can choose AC 3 from the list as well 5 If necessary click Custom to customize the rendering settings For more information see Creating custom rendering settings on page 56 Note You are limited to creating monaural files when rendering a surround project 6 Click Save Rendering the surround project SampleProject wav results in six WAV files Render hs ag ioi xi Save in SuroundProjects x QO 2 emam File Edit View Favorites Tools Help a g 4m Back gt gt ty Search L4 Folders amp as OS XK A at 2 My Recent Address IS SurroundProjects gt Go Links Documents SampleProject Center waw B 7 ji T SampleProject Left Surround way SampleProject Left way Desktop s i Surroun dProje cts SampleProject LFE way A SampleProject Right Surround waw A SampleProject Right way I Select an it
46. Paste Repeat When building projects you often need to paste the contents of the clipboard several times Rather than repeatedly pasting and moving the content the Paste Repeat command allows you to specify the number of times and at what interval the clipboard s contents are pasted on the track view This is a useful way of quickly building a project that uses a repetitive riff or structure For example you can build the backing tracks for a twelve bar blues copy them and use Paste Repeat to paste several copies of it in the project Click the Time Selection Tool button i Drag the mouse in the track view to create a time selection spanning several events and copy it to the clipboard Click the Go To End button 5i on the transport bar or press Ctrl End to send the cursor to the end of the project From the Edit menu choose Paste Repeat or press Ctrl B The Paste Repeat dialog appears Enter a number in the Number of times to paste box a a E E Select the End to end radio button and click OK The events are pasted end to end the number of times specified in step five starting at the cursor position Using Paste Insert To insert the contents of the ACID clipboard at the current cursor position and force existing events to move in time to accommodate the pasted events choose Paste Insert from the Edit menu If the cursor is in the middle of an event the event splits at the cursor position where the new events are pasted For more
47. QuickTime for Microsoft Windows The RealNetworks standard for streaming media via the Web This option renders both audio and video into one file A Sony proprietary lossless audio compression format A Sony proprietary wave format that does not have a restricted file size unlike Windows standard WAV format which is limited to 2GB The standard video file format used on Windows based computers The standard audio file format used on Windows based computers The Microsoft audio format used to create files for streaming or downloading via the Web The Microsoft audio and video format used to create files for streaming or downloading via the Web Note Some plug ins such as MP3 may require registration From the File menu choose Render As The Render As dialog appears Choose your preferred file format from the Save as type drop down list If the format allows you to create custom settings the Custom button becomes active Click Custom The Custom Template dialog appears Make the appropriate setting changes for the chosen file format For help on individual settings click the What sThis Help button 2 and click a setting Tip To save the custom settings for future use enter a name for the template in the Template box and click the Save Template button W 5 Click OK The Custom Template dialog closes Publishing to the Internet When your project is finished you have the option of publishing it to the Inter
48. RealMedia G2 platform allows you to create a single file that contains streams for several bit rates A multiple bit rate file can accommodate users with different Internet connection speeds or these files can automatically change to a different bit rate to compensate for network congestion without interrupting playback To take advantage of multiple bit rate encoding you must publish your media files to a Windows Media server or a RealServerG2 A standard language of control messages that provides for communication between any MIDI compliant devices Anything from synthesizers to lights to factory equipment can be controlled via MIDI Normalize Nyquist Frequency Offline Media One Shot OPT Plug In Pan Peak Data File Proxy File Pulse Code Modulation PCM Quantization Real Time Streaming Protocol RTSP Redirector File Region Rendering Resample Refers to raising the volume so that the highest level sample in the file reaches a user defined level Use normalization to make sure you are using all of the dynamic range available to you The Nyquist Frequency or Nyquist Rate is one half of the sample rate and represents the highest frequency that can be recorded using the sample rate without aliasing For example the Nyquist Frequency of 44 100 Hz is 22 050 Hz Any frequencies higher than 22 050 Hz produce aliasing distortion in the sample if no anti aliasing filter is used while recording A media file
49. Recording MIDI in real Ume sacas vive cdatoncedes 2eieen cide dweeee cide aesasaw tout endaca as 165 Using MIDI Step recordihg s5i50 00niysctdouwons edu tidan tr EEEE EEEN EEE REEE 165 Using MIDI merge recording cece ccc cece cee cece eee a a a E 166 Editing MIDI on the timeline 0 ccc ccc ccc ccc ccc cece eee eee eee ee eeeeees 167 Choosing a drum map or kit for a track 2 0 cece ccc cece e eee e eee eee eneeeeneees 168 Navigating the piano roll or drum grid 2 1 ccc ccc ccc ec eee eee n eee eeeees 168 Audition notes with the keyboard drum grid ccc ccc ccc cece ence eee eee eee neeeaees 169 SENNO E eria gasses awsewessoniamoriontocisuaunee re sennoobecsauares 169 Adding or deleting NoteS ccc cece eee cece ence eee e eee e sees eee ee eeeeeeeeeeees 170 Editing NOLS DOSINIONS hci eeevwnsiwede devas sie cduieweseiuaie swore eiuweuwus anne seniwaonaws 171 Editing Note CULATION 4 ccncswseusateneentet de havew es deudeduenweneesideeneedadwtieetieewnoees 172 EGICING Note velocity serseri errian erian aE ETRETANT EEEIEE ER ANET 172 Processing and filtering MIDI events ccc ccc ccc cece cece eee eeeeenenaes 173 Quantizing MIDI events ccc ccc eee ccc eee e ee eee eee n eee tense eeeteeneeeees 173 EGIUING VElIOCILY one aunsauescvawennaneseus couse eo csnouee tac oonn EE N 174 ECINC OUlAUON sierp reei EErEE EEEE dee EEEE EET E ETONE EE EEROR 175 Editing MIDI track properties 2 0 0 0 cc ccc ccc cc
50. Selection button 2 is toggled off and the increment arrow is displayed in black 2 Right click the increment arrow and choose Custom from the shortcut menu The Custom Length dialog appears 3 Choose the desired increment format from the drop down menu 4 Enter an appropriate value in the adjacent box and click OK The increment length is automatically configured to the selected value in both the Chopper and the track view Note t is possible to set an increment value that results in the increment arrow extending beyond the scope of the Chopper If this occurs an accurate depiction of the increment still appears in the track view Inserting selections in the track view You can add selections from the Chopper to your project in several ways Using the Insert Selection button After you create the desired selection and increment you can insert the selection in the project at the track view s cursor position by clicking the Insert Selection button jetinsert After the Chopper inserts the audio the cursor moves to the end of the increment e Ifthe increment length is equal to the selection length selections are painted end to end e Ifthe increment length is greater than the selection length an appropriate amount of silence is painted prior to the next insert position e Ifthe increment length is less than the selection length selections overlap Using copy and paste You can right click the selection in the Chopper and ch
51. Using advanced search Options ccc ccc ccc ccc cece e eee e eee te ee eennenes 83 Previewing MEA 1 ccc eee ee eee eee eee eee eee eee eects eee eeeeees 84 Adding media to your Project 20 ccc ccc cece eee cence nee eee e eee ee eee eenenes 84 Resolving offline Media files 0 ccc ccc cc cc cen eee e eee e eee eee eeneneeees 84 Customizing the Media Manager WINdOW cece cece eect eee e teen eeeeeeanes 85 Automatically hiding the Search pane ccc ccc eect eee eee e eee e ee eeeeeeenees 85 Docking and undocking the Search pane cc ccc ccc ccc eee eee eee eeeeeeeeeees 85 ResiIZInG COMMANS 2u lt chavcerivieconssueus ANSE EEE EISE EE S ET EEA ARA EREA ASR 85 Moving COl 44440 0ce roteer ARENE EE aE E EAE EEEE 86 Showing or hiding COIUMNS esessnssesuessuesssesersreseesesoreosesoesorsessorsorsoersess 86 Adding custom COlUMNS sersreririiririreri rodi Tr erer Vedra EEr NN eae eee tated Cid eNe 86 Setting Media Manager Options ccc cece cece eect eee eeeeeeeenees 86 Working in the Track View 0 ccc ccc cee eee eee e eee e eee e eee e eee eeeneeeees 89 Using project markers ANd FEGiONS ccc ccc ccc ccc cece eee eee eee ee eeeenes 89 Working with standard markers ccc ccc cc ccc cece eee eee eee eee e eee eeeeeeeeeeee 89 Working with time Markers cc cece cece cee eee eee teen eee eee eee eee eeeenes 90 Working with command Markers ccc ccc cee ete ce
52. When the docking area is minimized dragging a dockable window over the bottom of the ACID window causes the docking area to open again Docking windows 1 If the window is floating on the workspace grab the window by its title bar and drag it to the window docking area anywhere below the track list or track view As you drag the window the window s outline appears 2 Position the window s outline in the docking area where you want it and release the mouse Floating windows You may float a window so that it does not appear in the docking area 1 Grab the window by its handle the border along the left side and drag the window to the workspace As you drag the window the window s outline appears 2 Position the window anywhere in the workspace and release the mouse You can move the floating window by dragging it to a new position or docking it again If desired you can create a floating dock with multiple windows by repeating steps 1 and 2 Preventing windows from docking Press Ctrl while dragging a window to prevent it from docking in the workspace Resizing the window docking area You can resize the track list track view and docking area sections of the ACID workspace by dragging the dividers between them Tip You can quickly hide or show the window docking area by pressing F11 Changing the time ruler format You may specify a time format for the ACID time ruler to display The ruler located below the track
53. a tag to the files found by a complex search you can return to those files easily by searching on the tag The Media Manager tool can search for tags more quickly than it can perform keyword or advanced searches Searching using a keyword 1 Select the Quick text search check box in the Search pane and type a keyword or keywords in the edit box Tip You can separate search terms using quotation marks and other operators If quotes or wildcard characters are not applied an is automatically added before and after each search term 2 Press Enter USING THE MEDIA MANAGER 81 82 Chapter 4 The Media Manager tool searches your media files and displays the results in the Search Results pane on the right side of the window Any file that contains your keywords in the file name or attributes is displayed tags are not searched as keywords Your search terms are displayed in the yellow bar below the Search Results toolbar e Match all OO r Eg Clear Guitar tag and E Bow Keyword gt v Eon Mame Ebow vibration 01 way t Search terms Rating Guitar eats A Ebow vibration 02 waw Guitar Aer z Audio A Ebow vibration 03 waw Guitar D amp Vocals A Ebow Vibration O4 waw Guitar mak aE x Ebow vibration 05 waw Guitar A Ebow vibration 06 waw Guitar A Ebow Vibration OF way Guitar Search results _O iy Drum Loops x Ebow vibration 08 waw Guitar g D
54. and cannot be switched from ReWire mode If a ReWire mixer connects to an existing ACID window that window will run in ReWire mode and you can switch out of ReWire mode if necessary If you exit that instance of the software and start ACID again the new instance will start in ReWire mode and you can switch out of ReWire mode if necessary You can switch out of ReWire mode by choosing a new setting from the Audio device type drop down list on the Audio tab of the Preferences dialog e The ACID Tempo control below the track list is not available in ReWire Device mode Tempo information is provided by the ReWire mixer application Ifa ReWire mixer application includes a tempo map video and long one shot tracks in your ACID project will lose synchronization with looped material Using ACID as a ReWire mixer or in an ACID project without ReWire will resolve the issue e When using ACID as a ReWire device any effects chain that includes non in place plug ins will be automatically bypassed to prevent synchronization problems with the ReWire mixer application The effects chain icon will be displayed as a Apply the plug ins within the ReWire mixer application e Before rendering from a ReWire mixer application turn off the ACID metronome or the metronome will be included in the rendered output e Ifthe mixer has a Render in Real Time option this mode may reduce the possibility of drop outs from the ACID ReWire device while rendering The ACI
55. and choose Time Selection from the submenu The pointer displays with an adjacent cursor 1 Drag the mouse in the track view The selection area is highlighted on the track view Release the mouse button A selection is created and all events within it are selected Hold Ctrl and click any event that extends beyond the time selection The entire event appears highlighted however only the section of the event contained within the time selection is actually selected Tip You can select additional events within the time selection by continuing to hold Ctrl while clicking events In addition holding Shift allows you to select the events of multiple adjacent tracks within a selection Working with tracks The following sections explain several basic track functions and features Reordering tracks When building an ACID project you may want to reorder the tracks to place similar instruments in proximity to one another For example placing all drum loops together in the track view makes it easier for you to fine tune the mix of the song s overall drum sound 1 Drag the track header to a new location in the track list A heavy black horizontal line appears on the track list to indicate where the track will be placed 2 Release the mouse button The track is dropped in the new location and the entire track list track view adjusts accordingly Tip You can reorder multiple tracks by holding Ctrl or Shift while selecting tracks and dragging
56. are updated Click OK to close the Configure Generic Control dialog and then click OK to close the Preferences dialog From the Options menu choose External Control to enable your controller You re ready to start using your controller Turn each knob on your controller and notice that turning knob 1 adjusts the volume trim of track 1 turning knob 2 adjusts the volume of track 2 and so on Press the button that you assigned to scroll the channel bank down in step 8 Turn each knob on your controller and notice that turning knob 1 now adjusts the volume trim of track 9 turning knob 2 adjusts the volume of track 10 and so on Press the button that you assigned to scroll the channel bank up in step 8 so you can control tracks 1 8 again Press the button that you assigned to toggle automation mode in step 11 Select the Automation Settings button ier on each track to enable automation recording Start playback and turn each knob on your controller and notice that turning knob 1 records volume automation on track 1 turning knob 2 records automation on track 2 and so on For more information see Automation recording modes on page 136 Press the automation mode toggle button once more and you can use the knobs to adjust track trim levels again Appendix C ACID Tips and Tricks The following sections contain some time saving tips and creative suggestions for building ACID projects Adding long media files quickly Yo
57. audio is panned The current pan type appears at the bottom of the Surround Panner window Right click the Surround Panner window and choose a pan type from the shortcut menu e The Add Channels pan type makes the audio appear to move as a unit among the surround channels As you move the pan point toward a channel speaker icon more and more of the signal from the other channels are folded into the channel you are panning towards until at the extreme all channels are fed at full intensity into a single channel This pan type uses a linear panning curve e The Balance pan type is most useful for adjusting the relative signal levels of the channels In this pan type as you move the pan point from the center to a channel the signal in the channel you are panning towards starts at the base dB level either 0 dB 3 dB or 6 dB and increases to 0 dB The signal in the channel you are panning away from starts at a base dB level either 0 dB 3 dB or 6 dB and decays to no signal level For example when you pan fully to the right only the right channel is audible This pan type uses a linear panning curve e The Constant Power pan type maintains a constant volume as you move the pan point from channel to channel This pan type which uses the constant power panning curve is most useful for panning monaural source media e The Film mode allows you to pan between pairs of adjacent speakers in 5 1 surround projects using a constant power model Th
58. automation by clicking the Bypass FX Automation button w on the Audio Plug In window This does not remove any effect automation envelopes from the track but rather temporarily bypasses processing of the effect automation You can toggle this button on and off to hear the difference between the plug in chain as a standard non automated effect versus an automated effect Removing plug ins from chains 1 Click the Track FX button 84 The Audio Plug In window appears 2 Right click the plug in and choose Remove from the shortcut menu or click the Remove Selected Plug In button E 3 Click the Close button X to close the Audio Plug In window Tip To remove all plug ins in a chain right click the Track FX button t and choose Delete All Saving plug in chains as packages You can save plug in chains as packages so that you may use them again with other projects If you use a combination of plug ins often saving them as a package saves you time Effect packages retain their chain order and individual plug in settings You may save plug in chains as packages from existing chains on tracks or when you are creating a plug in chain The plug in chains that you save as packages appear in the Plug In Chooser dialog in the Packaged Chains folder You can apply an effect package to a track the same way you assign a plug in to a track Once you have created custom presets for effects or effect chains you can use the Preset Manager to bac
59. bit error where burning stopped and restarted Consider clearing this check box when creating a premaster disc Select the Erase RW disc before burning check box to erase a rewritable CD before you begin burning Select the Close disc when done burning check box to close the CD after burning Closing a disc allows your files to be played on an audio CD player You cannot add tracks to a CD once it has been closed Select the Eject disc when done check box to eject the CD automatically when burning is complete Select the Burn selection only check box to burn only the selected region Clear the check box to burn the entire project Select the Render temporary image before burning check box if you want to render your CD project to a temporary file before recording Prerendering can prevent buffer underruns if you have a complex project that cannot be rendered and burned in real time Note The rendered temporary file will remain until you modify your project or exit If an image file exists when you Open the Burn Disc at Once Audio CD dialog the check box is displayed as Use existing rendered temporary image 5 From the Drive drop down list choose the drive for burning CDs From the Speed drop down list choose the speed at which you want to burn Choosing Max uses your drive s fastest possible speed decrease the setting if you have difficulty burning because of buffer underruns 7 Click Start Important Once the CD writing begins cancell
60. button is selected e Audio track panning Adjusts audio track panning when the Pan button is selected Bus send levels Adjusts bus send levels when the Sends button is selected Effect parameters Adjusts effect parameters when the Inserts button is selected The V Pot is velocity sensitive so rotating quickly changes values quickly and you can press the button to choose a selection When the Pan or Sends button is selected press the V Pot to edit the track or bus effects chain 2 Rec Ready Arms audio tracks for recording Button 3 SignalLED Indicates whether an audio track or bus is outputting a signal 4 Solo Button Press to solo a track or remove it from the solo group 5 Mute Button Press to mute or unmute a track 6 Select Press to select a track Button Item Description 7 Fader Adjusts the track or bus level unless the Flip button is selected When the Automation button is selected the fader adjusts the automation envelope if the track is in Automation Write Touch or Automation Write Latch mode The fader can also adjust settings for the following items when you select other buttons in the Channel section e Audio track panning Adjusts audio track panning when the Pan and Flip buttons are selected Bus send levels Adjusts bus send levels when the Sends and Flip buttons are selected The fader is touch sensitive so if you re recording automation parameters recording will begin when you touch the fader and st
61. by ticks Options Swing Oo Strength 100 Use the Input Filters tab to force notes from a track s input port to align with musical beats during recording 1 Select the track where you want to apply the filter 2 Inthe Track Properties dialog click the Input Filters tab 3 Choose Quantize from the drop down list at the top of the page 4 Select the Enable check box 5 Select your quantization options Item Description Quantize start Select this check box to force the beginning note on messages of MIDI events to a specified resolution on the grid Quantize release Select this check box to force the end note off messages of MIDI events to a specified resolution on the grid Preserve duration If you select Quantize start or Quantize release you can select this check box to maintain the lengths of notes Quantize grid Click an icon to select the resolution of the quantize grid Tuplet Select this check box to set irregular beat boundaries for the quantize grid For example to quantize to triplet beat boundaries in 4 4 time select the Tuplet check box and choose 3 in time of 4 WORKING WITH MIDI 181 182 Chapter 11 Offset by Select the check box and type a value in the box to offset the quantize grid by the specified number of ticks You can type negative values to shift the grid backward Swing Drag the slider to add a swing to the quantize grid When you set this slider to 0 notes are quantized d
62. choose Preferences and on the General tab select the Autoname extracted CD tracks check box For more information see From the Options menu choose Preferences to display the Preferences dialog on page 227 8 Click Save to start extracting audio CD data extraction begins and a progress meter is displayed If the file is longer than 30 seconds the Beatmapper Wizard appears 9 Use the Beatmapper Wizard or choose to open the file as a one shot The extracted file is added to a track For more information see Using the Beatmapper on page 114 You can also double click a CDA file in the Explorer window or drag it to the track view to extract a CD track without opening the Extract Audio from CD dialog Note When adding media from multiple CDs you may need to press F5 to refresh the Explorer window to view the new CD s contents Obtaining or editing CD information using Gracenote If ACID can access information about a track or CD either from the file or CD itself or from a local cache it automatically reads and displays this information when you insert a CD or browse your computer However if this information is not available the software can retrieve information over the Internet from Gracenote MusiclD Once ACID obtains information from Gracenote MusiclD it is saved to a local cache so the information displays more quickly the next time the tracks are displayed If the software cannot connect to the Gracenote Media Database a
63. clicking The selection method changes to vertical and again all events within and adjacent to the selection area are selected 5 Toggle click the mouse once more The selection method changes to horizontal and all events within and adjacent to the selection area are selected Creating time selections You are not limited to selecting events Frequently you may want to select only audio events occurring within a time selection You can do this using the Time Selection tool GETTING STARTED 45 46 Chapter 2 1 Click the Time Selection Tool button 5E or choose Editing Tool from the Edit menu and choose Time Selection from the submenu The pointer displays with an adjacent cursor 1 Drag the mouse in the track view The selection area is highlighted on the track view Release the mouse button A time selection is created and all events within it are selected Note f the selection area is automatically snapping to the track view s grid lines the ACID snapping feature is turned on You can turn snapping off by pressing F8 Creating event selections within time selections You can select specific events within a general time selection This technique is useful for selecting individual instruments from a particular section of a song For example you may want to copy all percussion events from a song s bridge and re use them in the coda 1 Click the Time Selection Tool button ME or choose Editing Tool from the Edit menu
64. contain any combination of loops one shots or Beatmapped clips MIDI tracks can contain only MIDI clips For more information see Understanding clip types on page 40 Een On a track with a single clip events are always created using the track s media On a track with multiple clips each event can point to a different media file In this example each J 05 event represents one of the track s three clips The banner at the top of each event i e Bongo 01 Bongo 02 and Bongo 03 displays the name of the event s source clip Adding clips to tracks Drag a file from the Windows Explorer Explorer Window or Media Manager window to an existing track in the timeline to add a clip to the track and add an event where you drop the clip The new clip is set as the active clip for creating events with the Draw A or Paint tool g d7 O T Ga Flip DYNAMICS vol 6 0d6 m Pan Center AIF Sl e You can drag single stream MIDI files to a track to add clips When you drag multistream MIDI files to a track tracks and events are created ai You can also record into a track to create a new clip Tips e You can use the Chopper window to create new clips from the track s existing media Ifyou want to add a clip to a track without creating an event drag a file from the Windows Explorer Explorer Window or Media Manager window and drop it on the Paint Clip Selector button p Guitar efje Sa ii Yo 31d
65. dee coe asa esas es ATERIA EA NEERA 122 EIGN OOV ES sncudrot chacaseewedenevinssiriebeeonr eis dbounnsasaueeercnchioasacireusreent 124 SING MOG SL MACKS dept ws os os boots wenn sane newer needa enaea ead 124 Credting a folder lack od lt dsscxvcaaidacncaeacsdustateitsessepadeersedsaee tin EATER 125 Adding existing tracks to a folder track ccc cece ccc cece eee e eee e eee eeeneeeneeneees 125 Removing tracks from a folder track cece ccc cee eee eee eee e eee eeeeeennees 125 WGA GOLGI a a 5 ater car ot ageing E E E E EE EE EE E 125 SOIOING a foldertrackK sacaa open to erimid erte rAr EEE EEEN TEEI 125 Editing events in a folder track 2 0 0 0 ccc ccc ccc ccc eee eee eee e eee eee eeeennees 125 Mixing multiple tracks to a single track cece ccc ccc cece eect ee eee ene eeeeeeeees 125 EXOOIMING OOPS eeart opas boas opens EE Acar opaus eyed Cakes sabes concn E 126 USING AUTOMAUUON 5099540 44 40 ree Geo ada 94 GaN S40e oye wr RT ewes ORS er Eee AEE ens 127 Showing or hiding automation CONtrOIS cece cece cece eee e teen teen eeenes 127 Track AUTOMATION 2 0 ccc ccc cee eee eee eee eee eee eee eee eee ee eeeeees 127 WHE CPAUILOIMAVION reesei er EA EE EREDETE E seus nach EE deawen ee ee waarenEs honwewesnmaewees 127 Volume or pan AUTOMATION ccc cece eee eee eee e eee eee eee eee eee eee eeeeees 128 DUS GUTOMANON eres ersten eupaeoeeneeua asa eeeudecwes eee E E E 128 Assignable effects automation ccc ccc c
66. eE E E E E ET E E E E E eee E E E E eee es 41 Changing the length of events ccc cc ccc ccc eee eee teen nee e eee teen eeeeeeeneeees 43 Erasing sections Ol CV CIS ssirsrerssrsrss idi redrt ide rau wenden aeeeedueedyousasataeueenyases 43 MOVING CVGIIG 20a goo nes wsancsesaeaw es neon etree EE EAE AENEAN EY 43 Edin IWWOLEGV GINS 12 4500 044Giet he obeedds aoa eee eek ee eee A beheee rete 43 USING CMCCUNS Ol nas csvne Sed on owt oniienedte wed etawn aes eek ds Badu Rede w eee ekmen 43 Positioning the cursor with the MOUSE ccc ccc ccc cece eee eee e ee een ee eeeeees 44 Positioning the cursor with the keyboard cc ccc ccc ce eee e eee e nee eee eeennes 44 Positioning the cursor with the Go To command cc ccc cc ccc cece ence eee eee eeeees 44 Makna SCICCIIONS 2405 4 400 0000 Genus caceeseeus TEE aude ene coeneaceeeorenwonenuceus 44 TABLE OF CONTENTS 1 2 TABLE OF CONTENTS SCIECUING AN EVENT x 0442400088a04sie dns eee A AE A 44 Selecting Multiple events 1 0 ccc ccc cee eee ee eee eee eee e eens eee eeeeeeeeeees 44 Creating time selections 2 0 ccc ccc ccc cece eee nee e nee e eee eee eeeeeeeneeees 45 Creating event selections within time selections ccc cece cence eee cece eeeeeennes 46 Working with TACKS 666 c0 esc60eseoesacwweueunesee ashe estan TEn ease seeiniwdineiadawes 46 Reordering MaC Kia w seue inrer ENET ob senses od ea E ene tenes aN 46 PeSIZIMNG TACKS x4 hua EET EE
67. edges of new events are not faded fades that were applied before the check box is cleared are not removed Right click an event and select or clear the Quick Fade Edges command to override the default event fade behavior for individual events Note Selecting or clearing the check box will not affect existing quick fades in your project To remove all quick fades from a project enter 0 in the Quick fade time box Enter a time in milliseconds to specify the duration of fades applied to the edges of events Important Changing this setting will affect all existing quick fades in your project Choose a setting from the drop down list to specify whether you want to display waveforms in the timeline while recording audio pg 157 Turning off waveform displays can improve performance Choose a setting from the drop down list to specify the type of clip that will be created when you record audio pg 40 Choose a setting from the drop down list to specify what happens if you click the Record button when no track is armed New Audio Track Creates a new audio track where you can record New MIDI Track Creates a new MIDI track where you can record Do Nothing The Record button is unavailable unless an audio or MIDI track is armed for recording Select this check box if you want to use the project name to identify recorded clips For example if this check box is selected and you re working with My Remix acd recorded files will be n
68. editing the envelopes in the timeline or by recording automation with the controls in the Soft Synth Properties window For more information see Adjusting envelopes on page 132 The controls in the Soft Synth Properties window behave differently if the track has automation envelopes and when you change the track automation recording mode e When the track automation mode is set to Off the controls in the Soft Synth Properties window affect the entire bus track and all tracks routed to the soft synth e When the track has automation envelopes and the track automation mode is set to Read the Soft Synth Properties controls change state to reflect the envelope setting during playback but cannot be adjusted e When the track has automation envelopes and the track automation mode is set to Touch or Latch the Soft Synth Properties controls edit the envelope setting at the cursor position For more information see Track automation on page 127 Editing MIDI clip properties From the View menu choose Clip Properties or Ctrl Alt 3 to display the Clip Properties window You can also get to the Clip Properties window by double clicking the track icon and selecting the Clip Pool tab in the Track Properties window Double click one of the clips to open the Clip Properties dialog The contents of the Clip Properties window will change to display properties for the currently selected clip in the timeline You can use the Clip Properties window to ed
69. eee eee e nee eeeeees 186 Merging controller data from a MIDI clip 0 ccc cece ete eee ene e eee eeeees 187 Using the piano roll editor ccc ccc cc cece cee eee eee eee eee eeeeees 187 Viewing the piano roll editor 2 ccc cc cee eee e eee eee eee eenenes 187 PFE VICWIPIO MIDE esa arrese anwar sca wracwoaee erate ns EEEE E ANEA ea wena eaare Rare Ree suena 188 Adding note EVENTS 2 0 ccc ccc ccc ccc cece eee A E 188 EANO NOLS CV GINS 6 01 esis sien e ne EEn EENE EENE enw ond ENEN 188 TOGGINGNOLESNADDING 4cksu dow owtwwtewenraawiGuevecdbariwutewns REENE EOE bawaseuwe une dead 190 QuantiZing note events ccc ccc cece eee eee e eee eee e eee eee e eee eeeteeneeeeees 190 Delen NOTECVENIS vacc cure stiuve etre nnvins ae ciesad beeen ETNEA ENEE 191 UNnGGING ANG redoing s iis0s50cieaeetensakssctnnasieess RE EAEE aE EEEE 191 SING the MSECOIOM sn otieyd neice nance coca oaee 14d eae EARE AA eR 191 Viewing THe tedi Or sone etre sie hak nen E a EENE NEEN ENEE EEOAE ENSA 191 PICVICWIFG NIDE iere A AEA EEEE E ARE E E E S AEE 191 SESE CHE NISl E T E E E E E A A E EEE 192 solaa SRE A E E E A T E A E E EE 193 Creating CV CHS 6 ccne sni ten E ANE OEE EERE ESENDERE 195 Quanti zing CV CNS eis oac cosa esacadernte ess cueei sda EEEE AAAA NE 195 DEICTING CVEINS nactn owas cow atow casa E EE E A E E E 196 Undoing ANG TECOING o4 650k cieeice cick e ed dined eedWiadiendreussddinrdarbbsaseetetarasaaban 196 Routing tracks to MIDI devices or soft synth
70. effects send or bus send levels 00sec cece ence eee e eee eeenaes 212 Adjusting channel levels o 5 a csteuteeinia aaene itunes esa aed eae rain eme nn nee eerie mene 212 Pani AUiClO eprorin rerea E Oeeee E ed eae tenwlou eae ees kuces 213 Pai MG CAC KG io oie eur cats aes oe ea es lee ewe a oe ea ee ee naan 213 Panning Miker COM UKONS secreet EEEE EE kone whet EEE 214 Using the Surround Panner WINdOW 0 ccc cece cece cece eee eee e teen eee eeeeees 214 A tomating panNiNgG e cchcaanneasasceaencise ne eee euerss Sou ae 4 ou ne eae eee re oeeneeans 217 Turning on panning keyframes 0 ccc ccc cece cence eee eee e eee e eee eee eeeeenes 217 10 TABLE OF CONTENTS Adding panning keyframes ccc ccc cece cee eee n eee teen eee eee e ene eeeeennes 217 Working With KeViraMes soni d 0ietaay vd du segwnawareengs oon T RAEAN deeds 218 Rendering SUrrOUNT PIrOjeCtS cece ccc ccc cece AEREE RER RRE e ee eeeeees 220 Burning AC 3 files to DVD 2 0 ccc ccc cece cee ne ee eee eee ee een eee ee ee eeeeennees 220 Customizing ACID Software ccc cece cece ccc e cence ence ee eeeeceeeeeeceneeeeeeeenaees 221 Working with ACID windows ccc cece cece eee e eee e een e eee eeenenenaes 221 Docking and floating ACID windows cece ccc ence eee e eee e ene e eee neeennes 221 Changing the time ruler forMat 0 ccc cece e eee e eee eeeeeees 223 Using the ruler ONSEN eriseeria ECEE saute
71. file may not be properly detected Click the Redetect Beats button on the Stretch tab of the Clip Properties window to apply the ACID beat detection algorithm to the loop Note Groove maps are applied nondestructively If you want to change a media files s inherent groove use the Render to new track command to render a new grooved media file Important Grooves cannot be applied to Beatmapped clips Applying a groove to an entire track 1 From the View menu choose Groove Pool to display the Groove Pool window if it isn t already visible 2 Drag a groove from the Groove Pool window to a track You can drop the groove in the track list or on the timeline A groove event is displayed at the bottom of the track to indicate that a groove has been applied to the track To toggle the height of the groove strips choose Show Full Size Groove Strips from the View menu Tips e Drag a groove from the Groove Pool to an existing groove event to change the event s groove e Right click and drag with the Groove tool F to erase a groove event e Hold Ctrl and right click a groove event with the Groove tool to erase the entire event e Hold Ctrl and click a groove event with the Groove Erase tool S to erase the entire event Setting a default groove for new tracks If you have a groove that you d like to use to set the overall feel of a project you can set it as a default for your project 1 From the View menu choose Groove Pool to
72. file to a project the track name is initially the same name as the file s name Right click the track name and choose Rename from the shortcut menu or double click to change the track name Bus assignment Device selection Clicking the Bus Assignment button l and selecting a letter from the menu allows you to assign the corresponding track to the specified output bus However the button is only available in projects containing multiple busses For more information see Adding busses to the project on page 141 MIDI Input button Clicking the MIDI Input button ce allows you to choose a MIDI input device for recording MIDI For more information see Recording MIDI on page 164 MIDI Output button Clicking the MIDI Output button allows you to select soft synths and MIDI devices and the channel you want to use to play MIDI data on the track For more information see Setting up a MIDI controller for recording into a track on page 164 Gravyboat H O or Auto All O Pro 53 xpress 1 H Attack Tune 100 Il Center he 1 MI MIDI Output Fro 53 press Program button Clicking the Program button F allows you to change the settings of your soft synth and show hide keyframes For more information see Changing the track voice on page 178 For more information see Adding a program change keyframe on page 184 Track FX button The Track FX button l accesses the Audio Plug In window from which you can add edit and apply effects
73. finished project to CD Starting projects Double clicking the ACID icon on the desktop starts the software You can immediately begin building your ACID project using the application s default project properties However you may prefer to customize the project properties prior to beginning the project Setting project properties ACID allows you to configure project properties and add summary information prior to beginning a project Choosing New from the File menu displays the New Project dialog This dialog contains two tabs Summary and Audio Selecting the Start all new projects with these settings check box configures the software to use the parameters and information in both tabs as defaults when starting all subsequent projects Note You can edit project audio properties and summary information at any time Choose Properties from the File menu to display the Project Properties dialog which contains the identical tabs and parameters as the New Project dialog Using the Summary tab This tab allows you to enter information about the project These boxes may be left blank or if information exists you may change it at any time Item Description Title Enter the name or title of the project Artist Enter the name of the narrator band or artist s being recorded into the project Engineer Enter the name s of the people who mixed and edited the project Copyright Enter the date and ownership rights of the project Comments Enter in
74. frequency changes sound more natural change the fade curve types to change the interpolation rates between envelope points For high to low frequency sweeps use a fast fade curve for low to high frequency sweeps use a slow curve For more information see Changing envelope fade curves on page 134 MIDI controller automation You can use envelopes to adjust MIDI controllers throughout a project Adding or removing MIDI controller automation 1 Right click the track header choose Insert Remove Envelopes and then choose Configure Controllers from the menu The MIDI Track Controllers Automation dialog is displayed 2 Select the check box for each controller you want to automate with an envelope If the controller you want to automate isn t displayed select the Show all controllers check box at the bottom of the dialog 3 Click the down arrow inthe Envelope box and choose a command from the menu e Insert Envelope e Show Hide Envelope e Reset All Envelope Points e Delete Envelope For more information see You can use the Output Settings tab on the configure which controllers can be automated add remove or hide envelopes set default values and set each envelope s default fade curve on page 176 Adjusting MIDI controller automation settings Track level MIDI input filters available on the Input Filters tab in the Track Properties window allow you to control exactly which MIDI messages you want to record or exclude For mo
75. from the menu Automation Recording Tracklcon Description Mode Automation Write Touch Envelope points or keyframes are created only while a control is being adjusted When you stop adjusting the control automation recording stops and the existing envelope points keyframes are unaffected Automation Write Latch y Envelope points or keyframes are created when you change a control setting and recording continues until you stop playback When you stop adjusting the control the control s current setting overwrites the existing envelope points keyframes Click to position the cursor in the timeline and click the Play button to start playback Adjust the control that corresponds to the envelope point or keyframe you want to adjust During playback adjusting a control will create envelope points or keyframes at the cursor position As long as you re adjusting the control new envelope points keyframes will be created for each change of the play cursor s position Click Stop E to end playback and stop recording automation Editing sections of your recorded settings in Touch mode In Touch recording mode envelope points or keyframes are created only while a control is being adjusted When you stop adjusting the control automation recording stops and the existing envelope points keyframes are unaffected Use Touch mode for touching up sections of your recorded automation settings 1 2 Select the Automation Settings button
76. from the menu if you want to echo notes from the MIDI controller to the track s MIDI device or soft synth for monitoring 5 Click the MIDI Input button on the track header and choose MIDI Input Filters from the menu to open the Track Properties window Use the Input Filters tab to specify which MIDI messages you want to record or exclude For more information see Configuring MIDI input filters on page 179 Recording MIDI in real time You can record MIDI in real time while your project plays back 1 Connect a MIDI controller to your computer If you don t have a MIDI controller you can use the keyboard in the track view when in MIDI timeline editing mode or the keyboard in the Soft Synth Properties window Note Not all VSTi plug ins can record using the keyboard in the Soft Synth Properties window 2 Select the Arm for Record buttons on the tracks where you want to record Arming a track enables it for recording 3 Choose a MIDI input device and channel for each armed track For more information see Setting up a MIDI controller for recording into a track on page 164 4 Setup any desired MIDI message velocity or quantize filters for your armed tracks For more information see Configuring MIDI input filters on page 179 5 Position the cursor where you want to start recording Click the Record button on the transport bar to start recording MIDI messages from your controller are recorded as you play them Notes are a
77. he keeun pone eer oes bee aeons 223 SING TNC DO ecT QING essien reari eI doen d dee sd a ere bh ce ed en dean ew we iw coer 223 SEEING HS QMO PVG eriin Sener aat aud EE ENEE ANTEA O meen LERET 224 Using the TOOlWA 54 60 1a56s0eneeeesee sass sees Ua nehun nutes Seeadaeedasot vaste enenas 224 Hiding and displaying the toolbar cece e cece e eee e tee eee eeennees 224 Reordering toolbar DUTLONS 6 aise aed biddewee di erk ESENIN edwiewd Medinet rN Ni 224 Adding buttons to the toolbar s s 56s cnsvurw occa idee ene saa wide wees ewseweenueSewoxweus 225 Removing buttons from the toolbar ccc ccc cc cece eee cence een e eee eee eennees 225 USING TAC timedisplay csnnccrcecgenaeer nd reeniri a ri ari eee ERRA 226 Changing cursor position ssessesussessesseesreseseesorsorsorsorsrrserserreeresee 226 Changing the time display ccc ccc ccc cece eee eee eee a eeeeeeennees 226 Monitoring MIDI timecode jerivie secs eee arusata een edead oe wens iden ans bene wernedun 226 Setting default track Properties ccc cece eee e eee e nents eee eeeees 227 SMO ACID Die ere Ceo as ce cea eot wend deemed EEEE twas ENEE 227 Using thie General tab as o issivenss one Gaver ewiie seduce arirodiadbiewie edie EENEN 228 sii the AUGIO CAD coreeni ririri e one peace E anon ue ehies ons 230 Using the Audio Device tab 0 ccc ccc ccc cece een eee eee e nett eeeeenees 230 SIG tine WD aS ci sarees org econ tec a ire eH ou anew EEE REEE EEEE E
78. ii A Front L R Rear L R Cenei LFE Surround panners Routing to hardware in the mixer You must route the surround audio to the correct output in the mixer 1 From the Options menu choose Preferences 2 Click the Audio tab 3 From the Audio device type drop down list choose an audio device type other than Microsoft Sound Mapper such as Windows Classic Wave Driver 4 Choose the playback devices for the six surround channels From the Default Stereo and Front playback device drop down list choose the appropriate device for the front left and right surround channels e From the Default Rear playback device drop down list choose the appropriate device for the rear left and right surround channels e From the Default Center and LFE playback device drop down list choose the appropriate device for the center and LFE surround channels 5 Click OK Overriding the default device routing By setting up the device routing in the Audio tab of the Preferences dialog you have set the defaults for surround routing However you can override the default device routing at any time using the Surround Master bus in the Mixer window 1 Inthe Mixer window click the Audio Device Selector button EF on the Surround Master control A menu of surround channels Front L R Rear L R and Center LFE appears 2 Inthe submenu match a surround pair with the appropriate output 3 Repeat steps one and two to match each surround pai
79. in conjunction with the Ctrl key the Groove Erase tool can erase an entire groove event Activates What sThis help to obtain information about a specific option menu or part of the ACID window Track list This list identifies the track order in your project and contains the track s controls The following sections identify and briefly explain the controls located in the track list Arm for Record Track FX Track number Track name Automation Settings Mute i Solo Mal Drum Owe H O Vol amp OdB I Fan Center AIF amp ee Wl Bass H O ko 9 amp 7dB Pan Center j amp Paint Clip Selector l r Pan slider Volume slider Minimize Track Height Maximize Track Heigh aximize Track Height MIDI TRACK E MIDI Track OI MIDI Input cF Auto All DLS Soft 5 110 A Power lt Program Vol 100 il Touch MIDI Output o w 109 f Lo II li neme Griy SREASTER4 Tr Controller data sliders Fitch Bend 5 192 EN AFtertouch oli Pa MIDI controller data Insert controller envelopes Modulation Oo Pa Porkarmento Time oli Po Minimize Maximize Track Height buttons These buttons control the track s appearance size on the track list and the track view Track number This area identifies the track s number in the project You can quickly change the track order by dragging selected tracks within the track list Track name When you add a
80. in the media file click the Save File button You can also click the Save File As button WE to save the changes to a new file The media is saved with the modified track properties to a new file and renames the track in the track list to reflect the change All the information in the Clip Properties window is saved to your file except for any pitch shifting you have applied Any regions or markers you have created in the Chopper are also saved For more information see Inserting markers and regions in the Chopper on page 102 Adjusting clip properties for MIDI tracks From the View menu choose Clip Properties to display the Clip Properties window The contents of the Clip Properties window will change to display properties for the currently selected clip in the timeline You can use the Clip Properties window to edit MIDI data using the OPT list editor or piano roll For more information see MIDI Track Envelopes and Keyframes on page 183 For more information see Editing duration on page 175 Working with grooves From the View menu choose Groove Pool to toggle the display of the Groove Pool window The top portion of the Groove Pool window displays the available groove maps in your project The bottom portion shows the selected groove map so you can edit it Note The grooves listed in the Groove Pool are specific to your project If you ve deleted grooves and saved your project those grooves will be unavailable unless you im
81. information see Splitting events on page 64 Pasting events at the play cursor You can also paste the contents of the clipboard at the cursor during playback You can use this feature to create rhythms on one shot tracks while listening to the track you re editing in the context of the rest of your project When you re done creating events you can use the Render to New Track command on the Edit menu to save the rhythm to a new track or you can copy and paste your new events across the timeline 1 Create a time selection in the portion of the project you want to edit Select the Loop Playback button Copy the one shot you want to use Click the Play button gt to start playback tae a Press Shift Y to paste at the play cursor during playback the edit cursor remains fixed and the play cursor follows playback If snapping is enabled events are pasted at the next snap point You can use snapping to quantize your events Repeat step 5 as needed 7 Click the Stop button a when your re finished creating events Edit event positions as necessary Tip fyou re using this feature to tap rhythms with one shot tracks try applying a groove to adjust the timing of your rhythm For more information see Working with grooves on page 120 Cutting events Cutting an event a time selection or an event within a time selection removes the audio data from the track view and places it on the clipboard Once data is placed on t
82. is minimized you can also perform edit operations on clustered events in the group The following edit operations will affect clustered events e Pitch shifting events e Dragging events e Cutting copying pasting and deleting events Click to select a clustered group of events or hold Ctrl or Shift while clicking to select multiple clusters of events Selected events are displayed in a darker color than unselected events Events that overlap are treated as a single event when the folder track is minimized Mixing multiple tracks to a single track You can mix a selected group of tracks or an entire project to a single track stereo event If your project includes any muted tracks however those events are not mixed into the new track The original tracks and their events are unaffected when you mix to a single track Typically you would use this feature when you are finished refining a few tracks and want to combine them to conserve processing power Also when you mix multiple tracks to a single stereo track any envelope or track effects that you applied are rendered into the newly mixed down track You can also use this feature to downmix 5 1 surround projects to stereo This option also allows you to destructively process any track effect plug ins 1 Solo the tracks you want to mix To mix down the whole project skip to step two WORKING WITH TRACKS 125 126 CHAPTER 7 2 From the Tools menu choose Render to New Track
83. isn t displayed in the Plug In Chooser hold Ctrl Shift while restarting ACID and then select the Delete all cached application data check box to reset your preferences and rescan for DirectX plug ins Using track effects The Sony Track EQ plug in effect is assigned to all tracks by default however it does not use CPU power or affect the sound until you adjust its settings You can remove the EQ plug in if desired For more information see Removing plug ins from chains on page 112 In addition you can use effect plug ins in the Mixer window by applying effect chains to busses or soft synths or by creating assignable effect chains and routing tracks to them For more information see Using the Mixer on page 141 Important Be aware that using non in place plug ins such as Time Stretch Pitch Shift without preserving duration and some Vibrato settings will cause audio to play out of synchronization with the waveform display in the timeline and with other tracks If an effects chain includes non in place plug ins the effects chain icon will be displayed as a When using ACID as a ReWire device any effects chain that includes non in place plug ins will be automatically bypassed to prevent synchronization problems with the ReWire mixer application The effects chain icon will be displayed asa Apply the plug ins within the ReWire mixer application Creating or adding to track plug in chains A plug in chain can contain one or more plug
84. it is easy to change the length of an event You may find it helpful to turn snapping options on by choosing Snapping from the Options menu and choosing Enable from the submenu To alter an event s length click the Draw Tool button l and drag either end of the event When you drag the event past the end of the file looped files repeat but one shot and Beatmapped tracks draw silence n Original event Drag the end of to increase its length the event Erasing sections of events Occasionally you may need to delete only specific sections of an event and leave the rest of it intact The easiest method of deleting a section of an event is to use the Erase tool 1 Click the Erase Tool button or choose Editing Tool from the Edit menu and choose Erase from the submenu The pointer displays as an eraser icon 2 Drag in the track view to delete event data Tip With the Erase tool you can delete an entire one shot Beatmapped or MIDI event Just hold Ctrl while you click the event Moving events The position of the left edge of an event indicates when the event becomes audible during playback You can move events along the timeline either individually or as a group In addition you can stack events on top of one another A longer event placed over a smaller event conceals the smaller event and makes it inaudible A smaller event placed over a larger event is audible and renders the section of the longer event it covers i
85. knobs will adjust tracks 1 8 When you shift the banks down you can control tracks 9 16 and so on From the View function group drop down list choose Channels Select the Learn check box Select Channel Bank Down from the Host Command list Press the button or key you want to use to switch to the next group of 8 tracks Select Channel Bank Up from the Host Command list hmpangy Press the button or key you want to use to switch to the previous group of 8 tracks Choose Audio Channels from the View function group drop down list 10 Program each knob a Verify that the Learn check box is still selected b Select Channel 1 Fader from the Host Command list c Turn knob 1 on your MIDI keyboard You ll notice that the Channel MIDI Message and MIDI Data columns are updated APPENDIX B 259 260 APPENDIX B d Repeat steps 10a and 10b to program knobs 2 through 8 on your keyboard 11 Now let s assign a button to toggle the controller in and out of automation mode so we can use the knobs to adjust the track s volume trim or record volume automation 12 13 a b C From the View function group drop down list choose Assign Select Toggle Automation Mode from the Host Command list Verify that the Learn check box is still selected and then press the button or key you want to use to switch your control surface in and out of automation mode You ll notice that the Channel MIDI Message and MIDI Data columns
86. list choose the drive and directory where the file will be saved Enter a name for the project in the File name box From the Save as type drop down list choose the desired ACID project file type If you want to save a copy of each of the project s media files to the same location as your project file select the Copy all media with project check box This is available when saving as an ACID project file Click Save The project is saved Tip Once the project is saved you can use the Save As command from the File menu to create a copy of the project with a new name or save to a different ACID project file format Rendering projects Rendering refers to the process of converting the ACID project into a file that is formatted for a specific playback method Possible playback methods include media player applications Internet streaming media CD ROM and CD audio When an ACID project is rendered it is not overwritten deleted or altered and you are able to return to the original project to make changes and re render l From the File menu choose Render As The Render As dialog appears From the Save in drop down list choose the drive and folder where the file will be saved Enter a new name for the project in the File name box From the Save as type drop down list choose the desired file format If the selected file type supports it you can choose Render As Save in B Sony ACID Pro 6 0 Projects My Recent Doc
87. marker Note Time markers are not numbered Adjusting tempo to match marker to cursor Using this function with time markers is particularly useful when scoring video For more information see Scoring video on page 207 Position the cursor right click the marker tab and choose Adjust tempo to match marker to cursor from the shortcut menu The project tempo changes so the time marker matches the cursor position You can also align the marker and cursor by holding Alt while dragging the marker For example hold Alt while dragging a time marker to a location on the beat ruler The project tempo adjusts so the time at the marker occurs on a specific beat For example if you place a time marker at 10 seconds on the time ruler and hold Alt while dragging the marker to 5 1 on the beat ruler the project s tempo is adjusted so the first beat of measure five occurs at ten seconds Working with command markers Command markers add interactivity to a multimedia presentation streamed over the Internet As your media plays any number of other actions can be programmed to execute These commands are a part of the Windows Media and RealMedia streaming formats Most frequently these actions add text or open a related Web site The specific commands available vary depending on the final format of your project Note Streaming media files can be played back from a hard drive or CD ROM but in order to stream properly across the Internet the file mu
88. markers during looped playback helps you hear the results of your edits a Drag a beat anchor or insert a new one to indicate which beat you want to adjust If snapping is enabled beat anchors snap to the current grid spacing Hold Shift while dragging to bypass snapping press Shift after you click b Drag a groove marker to adjust when the beat will be played Drag to the left if you want a beat to be played early or drag left if you want it to be played late You cannot drag groove markers past each other but multiple markers can exist at the same point in time When the Allow snapping for Post Groove Markers check box is selected on the General tab of the Preferences dialog groove markers will snap to the current grid spacing if snapping is enabled Hold Shift while dragging to bypass snapping c Double click a beat anchor or groove marker to reset the marker to the beat anchor position Tip Hover over a beat anchor or groove marker to display a ToolTip that explains the effect of groove marker adjustments Using folder tracks You can use the folder track feature to help organize your track list and timeline by grouping tracks so they can be quickly and easily minimized or expanded 124 CHAPTER 7 When the folder track is minimized you can perform edit operations on clustered events in the group but you cannot create events with the Draw or Paint tools or perform edge trimming Expand the folder track to edit ind
89. or click the Browse button to choose a folder 4 Click OK Changing where recorded files are stored for individual projects 1 From the File menu choose Properties The Project Properties dialog appears 2 Click the Audio tab to display the project s audio properties 3 Click the Browse button next to the Recorded files folder box 4 Browse for the location where you want to save recorded files 5 Click OK Monitoring audio levels While you re recording a responsive meter is provided in the track header A O EN to monitor the incoming signal level of the selected recording device It is MEC E 36 important that you record with the highest signal possible without Yol 6 0d amp u Pan Center IF clipping A reading of 0 dB is the maximum for a digital signal Clipping occurs when the incoming signal is too high to be represented as a digital value The result is distortion in the recording A clipped signal will be indicated by a red indicator warning at the end of the meters Right click the meters and choose a command from the shortcut menu to adjust the display of the meters Using record input monitoring If you re using a low latency audio device and you want to hear your recording signal with real time track effects you can turn on input monitoring To turn on input monitoring click the Record Device Selector button 4 or 1 and choose Input Monitor from the menu and then choose Auto or On from the submenu
90. or click the What sThis help button l on the toolbar and then click any ACID item To use What sThis help in a dialog box click the question mark button I in the upper right corner of the dialog box and then click an item in the dialog box Help on the Web Additional ACID information is available on the Sony Media Software Web site From the Help menu choose Sony on the Web and choose the desired location from the submenu The software starts your system s Web browser and attempts to connect to the appropriate page on the Sony Web site Overview of ACID software ACID music creation software is designed to be powerful and flexible yet easy to use Many of the ACID operations menu items and shortcut keys are common to other Sony Media Software applications The following sections provide a tour of the ACID work area Main window The ACID workspace includes three main areas the track list the track view or timeline and the window docking area The other parts of the interface are tools and features used while creating and working with your project You can resize the track list track view and window docking area by dragging the dividers between them Divider The Strange2 acd zip Sony ACID P p File Edit view Insert Tools Options Help Timeline beea a D a S organ OBxS O 127 il 23 R gt m BN organ Too ORRO Track list as Track view S
91. points on an envelope while retaining the envelope s overall settings Right click an envelope and choose Thin All Points from the shortcut menu to thin the entire envelope To apply thinning to a section of the envelope create a time selection right click the envelope and then choose Thin Selected Points from the shortcut menu Note Thinning is intended to reduce the number of envelope points created through automation recording and will have little or no effect if you create envelopes by adding and editing points manually Deleting envelope points You can delete a point by right clicking it and choosing Delete from the shortcut menu If you want to delete all envelope points right click a point and choose Reset All from the shortcut menu Adjusting individual envelope points You can set the level of each envelope point by dragging it up or down As you move an envelope point a tooltip displays both the point s occurrence on the timeline and its level Other ways to set the level include e Right click an envelope point and choose a setting from the shortcut menu e Choose Select All from the shortcut menu to raise or lower all points on the envelope e Right click an envelope point and choose Set To from the shortcut menu This displays a box in which you can specify a setting You can adjust an envelope point s location on the timeline by dragging it right or left If snapping is enabled the envelope point snaps to time di
92. sending timecode with an offset e g 01 00 00 00 to allow time for multiple devices to synchronize You can create an offset on the ACID time ruler to accomplish this For more information see Using the ruler offset on page 223 Viewing outgoing timecode You can view outgoing timecode in the time display located directly above the track list Right click the time display and choose MIDI Timecode Out from the shortcut menu to display outgoing MTC time WORKING WITH MIDI 201 202 Chapter 11 00 00 00 000 1 1 000 Edit Cursor Position Beats Chrl 6 Edit Cursor Position Time ShiFk Time at Cursor Format Time at Cursor MIDI Timecode Out MIDI Clock Gut MIDI Timecode In Generate MIDI Timecode F7 JS Generate MIDI Clock Shift F7 pe Trigger From MIDI Timecode Chrl FF Triggering from MIDI timecode You can trigger ACID playback using MTC This means that the software initiates playback by receiving timecode from another device 1 Connect a word clock signal between your computer and triggering device to lock synchronization Note f the MIDI trigger device can output MIDI timecode a timecode converter is not necessary you can connect the trigger device directly to your computer Configure your triggering device to send MTC to your computer 3 From the Options menu choose Preferences and select the Sync tab to configure the application to receive MTC e From the Input device drop down list choose the
93. soft synth bus to your project ACID attempts to start the device There are several additional ways to open a ReWire panel application for use with ACID e Double click the soft synth control icon on the Mixer 2 e Right click the soft synth control icon 4 and choose Open ReWire Panel from the shortcut menu e Double click the soft synth control icon 2 on the Mixer to display the Soft Synth Properties window and then click the Open ReWire Device Application button Click this button again to close the application when your editing is finished Note Click the Lock MIDI Port Configuration button a to lock MIDI ports so port assignments are not lost due to dynamic changes from ReWire panels e If ACID is unable to start your ReWire device application you can start it manually Note For more information on working with your ReWire device application please see the application s documentation Starting playback of the ACID project and synchronized ReWire devices ReWire device and mixer applications communicate song position data back and forth with sample level accuracy Position the cursor or create a loop region in the ACID timeline to indicate where you want playback to begin and then click Play USING THE MIXER 153 154 Chapter 9 Displaying the Soft Synth Properties window for a ReWire 2 0 Device When you add a ReWire 2 0 synths master bus as a soft synth bus you can double click the soft synt
94. subtract a constant offset to selected note velocities Select this radio button and drag the slider to multiply selected note velocities by a percentage For example setting this slider to 50 would reduce all note on or note off velocities by half Select this radio button and type values in the Min and Max boxes to restrict selected note velocities to the specified range For example if you type 40 in the Min box and 90 in the Max box velocities below 40 will be set to 40 velocities greater than 90 will be set to 90 and velocities between 40 and 90 will be unaffected Select this radio button and type values in the From and To boxes to change velocity values gradually over time The velocity for the first note in the selection is set to the From value and the velocity for the last note in the selection is set to the To value Select the By percentage check box to change velocity over time based on the current values For example to fade a selection in select the By percentage check box and type 1 in the From box and 100 in the To box To fade a selection out type 100 in the From box and 1 in the To box Drag the Curve slider to choose the fade curve that will be used to generate velocity for notes between the first and last note Note Note on velocities are bound between 1 and 127 while note off velocities are bound between 0 and 127 5 Select the tracks or events you want to edit e Select a track to edit all events on the track H
95. tab in the Clip Properties window Both windows contain beat anchors however the markers on these windows perform opposite functions the beat markers P on the Stretch tab are used to remove an existing groove from a file and the groove markers on the Groove Editor window represent a new groove that can be applied with the Groove Pool window and Groove tool In the Groove Editor window a beat anchor represents the beat that will be adjusted or the source of your groove adjustment A groove marker jj represents the point in time when a beat will be played This is the destination of your groove adjustment A groove marker can occur before or after the beat anchor A line connects a groove marker to its associated beat anchor 3 Use the Length spinner control to adjust the length of the groove Decreasing the setting will remove beat anchors and groove markers from the file increasing the setting will add anchors and markers 4 Addor remove markers as needed e Ifyou want to add a marker press M or double click the beat ruler A beat anchor and groove marker are added to the nearest division on the beat ruler If you want to delete a marker right click it and choose Delete from the shortcut menu Tip Use a single beat anchor groove marker to adjust all beats forward or back equally This produces an effect similar to slipping an event 5 Adjust beat anchors and groove markers as necessary Adjusting anchors and
96. that cannot be located on the computer If you choose to leave the media offline you can continue to edit events on the track the events point to the original location of the source media file One shots are chunks of audio that are not designed to loop and they are streamed from the hard disk rather than stored in RAM if they are longer than three seconds Things such as cymbal crashes and sound bites could be considered one shots Unlike loops one shots do not change pitch or tempo with the rest of a project A plug in that uses the Open Plug in Technology OPT standard from Yamaha OPT plug ins provide tools for working with MIDI such as edit views effect processors and filters arpeggiators and real time panel automation To place a mono or stereo sound source perceptually between two or more speakers The file created when a media file is opened for the first time This file stores the information regarding the graphic display of the waveform so that opening a file is almost instantaneous This file is stored in the directory where the audio file resides and has a sfk extension If this file is not in the same directory as the audio file or is deleted it is recalculated the next time you open the file Working with certain types of media files with particular audio compression schemes can be inefficient and slow To compensate for this audio proxy files are created for these formats to dramatically increase speed and performance
97. the File menu choose Export MIDI 2 From the Export Project as Standard MIDI File screen choose a drive and folder from the Save in drop down list or use the browse window to locate the folder where you want to save your file 3 Type a name in the File name box or select a file in the browse window to replace an existing file Choose a setting from the MIDI file type drop down list to indicate the type of file you want to save Choose Standard MIDI File Type 1 to preserve tracks when exporting This mode preserves the MIDI data in your ACID project Choose Standard MIDI File Type 0 to save your project as a single track multichannel MIDI file For more information see Adding MIDI files to a project on page 163 Note When you add a Type 0 MIDI file to your project a separate track will be created for each channel in the file If you have tracks routed to separate soft synths or MIDI devices they will be preserved as separate tracks only if their MIDI outputs use different channels For more information see Routing tracks to MIDI devices or soft synths on page 196 5 Type a value in the Resolution box to set the resolution of file The default is 960 but you can specify any value between 24 and 960 Important Not all MIDI devices can read arbitrary resolutions 6 Click the Save button WORKING WITH MIDI 203 204 Chapter 11 Configuring a Mackie Control Universal The Mackie Control Universal is fully supported by ACID
98. the current track Monitoring MIDI timecode 7 Volume M Pan Type MV Height You can use the time display to monitor incoming or outgoing MIDI timecode MIDI can I Track EX r V MIDI Editors be monitored in the following ways J Restore original defaults i Cancel e Display MIDI timecode generated from external sources e Display MIDI timecode and MIDI clock information that is generated The time display settings work in conjunction with your project s properties and MIDI setup options 1 Right click the time display window to display a shortcut menu 2 From the shortcut menu choose the type of MIDI monitoring to be displayed Once you have made your selection the time display window displays both the MIDI code being input or output and a status message Setting default track properties Each new track has certain default properties including height volume pan type and track effects You can modify these track properties and then use the modified track as a standard for all new tracks you create 1 Modify a track s volume pg 48 pan type pg 113 height pg 46 and track effects pg 107 2 Right click the track header and choose Set Default Track Properties from the shortcut menu 3 Select the check boxes for properties you wish to set Clear the check boxes for the properties you wish to leave as they are Tip Select the Restore original defaults check box to return to the original track pro
99. the tag Press Enter If you want to change the icon used to display the tag right click it and choose Edit from the shortcut menu to display the Tag Editor dialog 5 If you want to change the tag s location drag it to a new location in the tag tree Applying a tag to a media file You tag media by dragging a tag from the tag tree to a media file in the Search Results pane or by dragging a media file to a tag when the Add Tag Mode button 27 is selected 1 Select media files to tag in the Search Results pane e To select a single file click the file or To select multiple consecutive files click the first file hold the Shift key and then click the last item or To select multiple files that are not consecutive hold the Ctrl key and click each file USING THE MEDIA MANAGER 77 78 Chapter 4 2 Click the Add Tag Mode button 27 in the Search pane 3 Drag a tag from the tag tree to the selected file s 3 4 Bass O4 wav 3 4 Bass OS way Tip You can also right click a selection in the Search Results pane and choose Add Tag from the shortcut menu to add a tag to all selected media The Tag Chooser dialog will be displayed Select the tag you want to add and then click the OK button When you add a subtag to a media file the tag s hierarchical position in the tag tree is SS applied implicitly Match Al 0 Quick test search Tags amp e EB a m Audio H A Vocals O amp Keyboar
100. the timeline are preserved MIDI controllers that are switches such as a damper pedal are always recorded in latched mode envelope points are created when you change a control setting and recording continues until you stop playback When you stop adjusting the control the control s current setting overwrites the existing envelope points When recording returns to the beginning of the loop region existing MIDI controller envelopes are unaffected For example you could record note data the first time recording passes through the loop region record pitch bend controllers the second time and modulation the third time Note Envelope points are not thinned when recording MIDI controllers from a hardware device 10 To stop recording click the Record LO button again or click the Stop a button on the transport bar Editing MIDI on the timeline Click the Enable Inline MIDI Editing button fal to edit MIDI events directly on the timeline In this mode you can draw and erase notes in a piano roll or drum grid view Free Fingers Low Bongo High Bongo Ride Cwm Wibra Slap Crash Oye Cowbell Splash Cy Tambourine Ride Bell T A piano roll allows you to edit MIDI notes for A drum grid allows you to edit MIDI notes for soft most patches synths that have drum maps defined WORKING WITH MIDI 167 168 Chapter 11 When you edit a MIDI event all events that use the same clip will be updated For more information see Using c
101. to enter ripple editing mode 2 Click the event to be deleted or make a time selection To cut multiple events use the Ctrl key the Shift key or the Selection tool to select the events For more information see Selecting multiple events on page 44 3 Press Delete to delete the event s Deleting time selections in ripple editing mode Events within the time selection and their time information are removed from the project Existing events occurring after the time selection move forward in the project by the length of the time selection When information is deleted it is not placed on the clipboard Events before delete Clipboard contents Events after delete Deleted information is not placed on the clipboard Existing events adjust to occur sooner in the project Deleting time and event selections in ripple editing mode Events within the time selection and their time information are removed from the project Existing events occurring after the time selection move forward in the project by the length of the time selection When information is deleted it is not placed on the clipboard Events before delete Clipboard contents Events after delete Deleted information is not placed on the clipboard Existing events on the top track adjust to occur sooner in the project Pasting events in ripple editing mode Once information is copied to the clipboard you may choose a variety of ways to paste the clip
102. to open the Edit Event dialog 3 Edit the values in the dialog For more information see Event parameters on page 193 4 Click OK The event updates to the new values Tip You can edit individual parameters in columns other than Message by double clicking the parameter and entering a new value Event parameters The table below describes the editable event parameters for different event types Event type Editable parameter Description After Touch Start Time Time in measures beats ticks where you want the event to begin Channel MIDI channel 1 16 where you want to send the event Pressure Amount of vibrato 0 127 you want to apply to each voice on the channel Control Start Time Time in measures beats ticks where you want the event to begin Change Channel MIDI channel 1 16 where you want to send the event Controller Change Displays the number of the current controller change type Choose a Number controller change type from the drop down list to the right of the Event type drop down Controller Change Value Controller value Note Start Time Time in measures beats ticks where you want the event to begin Channel MIDI channel 1 16 where you want to send the event Note Numeric value of the note you want to play For more information see MIDI notes and frequencies on page 194 On Velocity Speed of the note s attack 0 127 Low values produce a soft attack high values produce a strong attack Off Velocity Spe
103. to the Windows clipboard Default Background Sets the background color of the Video Preview window to the default color Black Background Sets the background color of the Video Preview window to black White Background Sets the background color of the Video Preview window to white External Monitor Sends the preview to an external monitor Display Square Pixels Compensates for any spatial distortions due to non square pixel aspect ratios Display at Media Size Displays video at the native resolution clipping if necessary Show Toolbar Toggles the display of the Video Preview window toolbar Show Status Bar Toggles the display of the Video Preview window status bar Viewing the status bar Right click the Video Preview window and choose Show Status Bar from the shortcut menu to view the status bar The status bar shows the video s frame size frame rate and display size Previewing on external monitors You can use your system s external monitor for previewing video playback You must have an OHCI IEEE 1394 adapter and a device to convert the DV signal to video such as a DV camcorder deck or media converter To specify an external monitor click the External Monitor button _ JExt Monitor on the Video Preview window or choose Preferences from the Options menu and click the Video tab Other settings for the external monitor can also be found on the Video tab For more information see Using the Video tab on page 234 Scoring
104. to the appropriate sound cards outputs where you have routed each of the pairs of inputs on a six channel amplifier home theater receiver channels The left channel of the Center LFE pair is Connect front rear center and LFE speakers to the the center channel the right channel is the LFE amplifier channel Setting up surround projects You can configure an ACID project to use 5 1 surround in the Project Properties dialog You can also choose to apply a low pass filter for the LFE channel Applying a low pass filter approximates the bass management system ina 5 1 decoder and ensures that you re sending only low frequency audio to the LFE channel 1 From the File menu choose Properties 2 Click the Audio tab 3 From the Master bus mode drop down list choose 5 1 surround 4 To limit the audio sent to the LFE channel do the following e Select the Enable low pass filter on LFE check box and enter a value in the Cutoff frequency for low pass filter box The low pass filter isolates the audio sent to the LFE channel by limiting it to frequencies lower than the value entered in the Cutoff frequency for low pass filter box e Choose a setting from the Low pass filter quality drop down list to determine the sharpness of the filter s rolloff curve Best produces the sharpest curve Note Before rendering your surround project check your surround authoring application s documentation to determine its required audio format Some encoders r
105. track s in one of the following ways From the Insert menu choose Envelopes and choose the bus for which you want to add an envelope from the submenu Right click the track header in the track list choose Insert Remove Envelope from the shortcut menu and choose the appropriate bus from the submenu A purple line representing the envelope appears across the track s Adjusting bus automation levels 1 Select the Automation Settings button x The fader handle is displayed as a in automation mode 2 Click the label on the multipurpose slider and choose a bus from the menu lal Walking der Sy vol 31 4 dB Ez I Touch Pan 25 L oo aA Hyper 3 Drag the fader to control the level of the track sent to each of the assignable FX chains that you have created Dragging the fader to the left cuts the volume dragging to the right boosts the volume The fader behaves differently depending on the track automation recording mode When the track automation mode is set to Off the fader adjusts the send level of the entire track In this mode the automation control acts as a second trim control When the track has a bus envelope and the track automation mode is set to Read the fader will follow the envelope during playback but cannot be adjusted When the track has a bus envelope and the track automation mode is set to Touch or Latch the fader edits the envelope setting at the cursor position If the track does not hav
106. v ea 1 a iii 2 57 4 pE Explorer Media Manager Groove Pool 17 4 17 4 5 0 20 511 MB Record Time 2 channels 20 02 35 Toolbar The toolbar allows you to quickly access the most commonly used functions and features in ACID Locks envelope points so they move with an event when it is moved along the timeline Opens a new project You will be prompted to save any changes to the current project B amp Activates the Metronome to keep time during recording and playback Displays the Open File dialog From this window you can browse all of the available drives to select an ACID project or audio file to open E Allows editing of MIDI events directly on the timeline In this mode you can draw and erase notes in a piano roll or drum grid view Saves any changes to the current project The first time you save a project the Save As dialog appears D Opens the Publish wizard so you can share your Activates the Draw tool to add and edit events ACID creation on the Web Opens a dialog where you can download media Activates the Selection tool to select multiple events from the Internet Activates the Paint tool to insert events across multiple tracks When used in conjunction with the Ctrl key the Paint tool can paint an entire one shot MIDI or Beatmapped media file to an event with one click Clears the selected items from the track view and places them on the ACID clipboard You can then p
107. which the time ruler and selection times are displayed These can include time seconds frames and all standard SMPTE frame rates Track Track List Track View Law Undo Redo Virtual MIDI Router VMR VST Instrument VSTi WAV Waveform Waveform Display Windows Media Format A discrete timeline for audio data Audio events sit on tracks and determine when a sound starts and stops Multiple audio tracks are played together to give you a composite sound that you hear through your speakers The track list contains the master controls for each track From here you can adjust the mix select playback devices and reorder tracks The majority of the track view is made up of the space where you draw events on each track u Law mu Law is a companded compression algorithm for voice signals defined by the Geneva Recommendations G 711 The G 711 recommendation defines u Law as a method of encoding 16 bit PCM signals into a non linear 8 bit format The algorithm is commonly used in European and Asian telecommunications Law is very similar to A Law however each uses a slightly different coder and decoder These commands allow you to change a project back to a previous state or reapply changes after you have undone them A software only router for MIDI data between programs The VMR is used to receive MIDI timecode and send MIDI clock No MIDI hardware or cables are required for a VMR so routing can only be perfor
108. window and support plug in chains In addition assignable effect outputs can be routed to project busses You can add up to 32 assignable effect controls to a project and each control supports as many as 32 DirectX or VST plug ins on its chain For more information see Adding depth with assignable effects on page 262 Adding assignable effect controls 1 From the Insert menu choose Assignable FX or click the Insert Assignable FX button Insert Fx in the Mixer window The Plug In Chooser dialog displays a list of the available plug ins and the assignable effect control is added to the Mixer window Important Be aware that using non in place plug ins such as Time Stretch Pitch Shift without preserving duration and some Vibrato settings will cause audio to play out of synchronization with the waveform display in the timeline and with other tracks If an effects chain includes non in place plug ins the effects chain icon will be displayed as a When using ACID as a ReWire device any effects chain that includes non in place plug ins will be automatically bypassed to prevent synchronization problems with the ReWire mixer application The effects chain icon will be displayed asa Apply the plug ins within the ReWire mixer application 2 Add all desired plug ins using one of the following methods Double click the desired plug in e Drag the desired plug in to the chain area e Select the desired plug in and click Add
109. window appears 2 Adjust the settings for band 1 as follows e Frequency 20 000 e Gain 14 9 e Rolloff 24 3 Adjust the settings for band two as follows Gain 15 e Bandwidth 0 9 Click the FX Automation button Hm The FX Automation Chooser dialog appears 5 Select the Band2 Frequency check box and click OK An effect automation envelope appears on the track Add points to the envelope so that the Band2 Frequency parameter oscillates between about 100 Hz and 3000 Hz For more information see Choosing stereo pan types on page 113 Making automated changes more stark ACID envelopes allow you to change settings for a variety of features over time While you may often use envelopes to transition smoothly from one setting to another you can also create interesting effects by making stark changes between settings Abruptly changing volume or pan By holding its setting until the next envelope point the hold fade curve allows you to use volume and pan envelopes to make abrupt changes For more information see Changing envelope fade curves on page 134 1 Select a track and press Shift V volume or Shift P pan to add an envelope Tip You can also use this technique on a bus track For more information see Automating mixer controls in track view on page 152 Click the Envelope Tool button 4 to select the envelope tool Right click the first point on the envelope and choose Hold from the shortcut menu Add several
110. within the MIDI file are displayed in a table Each event occupies one row and the rows are sorted in chronological order The columns in the List Editor tab display the contents of the events Viewing the list editor 1 Double click the MIDI icon on the track header to open the Track Properties window 2 Select the Clip Pool tab in the Track Properties dialog 3 Double click one of the listed clips to open the Clip Properties dialog 4 Click the List Editor tab The list editor appears Clip Properties E Free Fingers 1100 A HY XIF Yi Seer ad Toolbar Track HM StF MELT Channel Message 10 OO 00 00 00 1 1 000 Sequencer Specific o OO 00 00 00 1 1 000 Sequencer Specific Oo O0 00 00 00 1 1 000 Channel Prefix OO 00 00 00 1 1 000 5 Sequence Mame m 0000 00 00 1 1 000 7 Instrument Mame OO 00 00 00 1 1 000 5 Time Signature 44 a O0 00 00 00 1 1 000 Key Signature Z Major Events m 0000 00 00 1 1 000 SMPTE Offset 32 00 00 00 00 OO 00 00 00 1 1 000 z Tempo 125 000 BPM 0000 00 00 1 1 0000 36 003 C3 On Velocity 108 0000 00 00 1 1 006 42 F 3 F 3 On Velocity 118 00000003 1 1 193 42 F 3 F 3 On Velocity 57 x lt gt i gt gt I BM H 11000 1000 fatooo Transport bar Loop boxes Previewing MIDI You can preview individual events or the MIDI file as a whole within the list editor Tip To control volume during playback in the list editor drag the Preview fad
111. your project choose Remove All Unused Clips from the Tools menu To remove unused clips from individual tracks click the Remove Unused Clips button Fi in the Clip Pool window For more information see Using the Clip Pool on page 109 Reversing events You can select events in the timeline and reverse their audio and peak data Select an event in the timeline right click and choose Reverse or press U from the shortcut menu An arrow appears on the event in the timeline to indicate that it has been reversed Trimming events Whereas deleting allows you to select event data to be removed from the project trimming allows you to select the data that remains Trimming is performed by creating a time selection or selecting an event within a time selection and subsequently deleting all unselected data 1 Create a time selection or select specific events within a time selection For more information see Creating time selections on page 45 2 Press Ctrl T to trim the data within the selection All unselected event data is removed from the track view and discarded EDITING EVENTS 63 64 Chapter 3 Splitting events Splitting is a quick way to create independently functioning events from a single one You might consider splitting an event if you want to adjust a small part of the track For example you may want to apply pitch shift to a guitar track for a few measures and then return the track to its original setting Splitting occ
112. 00 Chapter 5 Chapter 6 Using the Chopper The Chopper feature in ACID allows you to quickly create slice and dice effects For creative ways to use the Chopper see Slicing and dicing in the Chopper on page 266 Working in the Chopper window Selecting an event loads its clip in the Chopper gt a Chopper Hyperfuzz 01 jet Insert ae FE leila xia Fu pr Toolbar E 1 1000 1 1 2324 i 12 000 12 384 13 000 13 384 i in i 00 00 00 000 hooomo howoo1o00 o0 00 01 500 o Time ruler Sat _ al delle gt K z 1 1 000 Transport bar Viewing the Chopper To display the Chopper choose Chopper from the View menu or press Alt 2 Changing the Chopper grid The Chopper s grid uses the same increments available on the track view To change the grid display right click the waveform area of the Chopper choose Grid Spacing from the shortcut menu and choose the desired display from the submenu Changing Chopper snapping options The snapping behavior of the track view and Chopper are linked To enable snapping in both components choose Snapping from the Options menu and choose Enable from the submenu or press F8 When snapping is turned on you can choose between snapping only to the grid or snapping to all elements For more information see Using snapping on page 94 Magnifying the Chopper There are three ways of adjusting the magnifi
113. 03 Trim Assign track bus to LFE channel Pan point ee a ad ee a E N Muted channel 1 Active included channel ee ee n Center mi Pan type indicator 1 Click the speaker icons to mute or include channels Muting a channel ensures that no audio bleeds through a channel For example you might want to mute all but the center channel when you re panning dialogue to the center channel Tip Ctrl click a speaker icon to solo the channel 2 Drag the pan point to position the sound within the sound field For more information see Moving the pan point on page 215 3 Click the center speaker icon to include the center channel and drag the Center fader to apply a gain to the center channel Applying a gain to the center channel may make dialogue more present in the mix Note When automating panning using keyframes you cannot automate the gain applied using the Center fader For more information see Automating panning on page 217 4 Drag the Smoothness slider to adjust the smoothness of the interpolation path between panning keyframes The smoothness setting appears only when you are automating panning using keyframes For more information see Adjusting the Smoothness slider on page 219 Moving the pan point You have a variety of methods to help you position the pan point in the Surround Panner window Method Description Click to toggle through three options for constraining pan point motio
114. 1 Click the Media Library Actions button i and choose Options from the menu The Media Manager Options dialog is displayed 2 From the Reference library drop down list choose the library you want to load when you click the Switch to Media Reference Library button in the upper left corner of the Search Results pane For more information about using reference libraries see Opening a Reference Library on page 81 3 Inthe Search results limit box type the maximum number of media files you d like to have returned in the results of your searches Note ncreasing the Search Results Limit setting increases the amount of time required to search a library and can significantly decrease performance if set excessively high 4 Select the Double click in Search Results pane adds media to project check box if you want to add files to the current project by double clicking a file in the Search Results pane 5 Select the Shut down database service on exit check box if you want to stop the database service when you close ACID Note Stopping the service can conserve system resources when you aren t using any applications that use the Media Manager tool However the application will take longer to start when the check box is selected 6 Set your options for adding media to a library a Select the Add tags and custom properties from files check box if you want to add tags and custom columns saved in the media files to your library For more in
115. 101 Magnifying the ChODper 6 iisiwenis one ondeuenctaesds ess ori ued TEENE EAEEREN 101 Previewing in the CHOpper ccc cece cece eee ee ee ee eee eee e eee ee eee eeennees 101 Using Chopper toolbar and keyboard commands cccce cece eee n eee eee eenees 102 Inserting markers and regions in the Chopper ccc ccc cee cece eee eeeenen eens 102 Creating selections in the Chopper ccc cece cece cece eee e eee e eee e eee eeeaaaees 102 Placing files in the Chopper ccc ccc cece cece eee nee e eee e een n eee ee eeeeennees 102 CredtinG Selections ac a4 at euros erine tri rer ENERETTEN ASE ia veneewdcuwews 103 Creating selections of a specific musical length ccc eee eee eee ene eeeeeeees 103 IMSETUIAG WICKCMIGIAUS serseri eirt eke rae sor ewes eneaewseiaeeernaneem ease bnwes 103 Creating Ncr emnets yavacternes coca Ra CEER EAA seule earn naa oe On eaewan eed teas 104 Creating increments of a specific musical length 0 cece cece ec eee eee eee eeaees 104 Creating increments of a custom musical length cece cece cece een e eee eeees 105 Inserting selections in the track VIQW ccc ccc ccc ccc cece cette eee eee eeeeeees 105 Using the Insert Selection button 0 ccc ccc cece cent eee eee eeennnes 105 Using copy and paste esessrcrrisrircead ddie rico ne ceen qeanwensene odie ceneeeeeesneesoaauaee 105 Dragging selections osiwacceusterwdwovevsienornenene ENARE EREE 105
116. 180 Chapter 11 6 Select a radio button to indicate how you want to change velocity Item Description Invert Select this radio button to invert note velocities When you invert a velocity it is subtracted from 127 negative values are forced to positive so a note with a velocity of 127 will be 0 after inversion a velocity of 10 will be 117 and so on Set to Select this radio button and drag the slider to change note velocities to a specific value Add Select this radio button and drag the slider to add or subtract a constant offset to note velocities Scale by Select this radio button and drag the slider to multiply note velocities by a percentage For example setting this slider to 50 would reduce all note on or note off velocities by half Limit Select this radio button and type values in the Min and Max boxes to restrict note velocities to the specified range For example if you type 40 in the Min box and 90 in the Max box velocities below 40 will be set to 40 velocities greater than 90 will be set to 90 and velocities between 40 and 90 will be unaffected Note Note on velocities are bound between 1 and 127 and note off velocities are bound between 0 and 127 Setting up MIDI quantize input filters Track Properties T Stephanie Output Settings Input Filters Clip Pool Enable Quantize Start C Quantize Release L Preserve Duration Huantize grid o J J b A C Tuplet in time of C Offset
117. 27 130 Track automation envelopes 132 Track envelopes 132 135 Colors 132 Deleting points 133 Locking to events 135 Removing 135 Types 132 Track filters for MIDI 179 Track list 18 Track Properties window 23 115 120 176 Track view 20 Tracks Adding clips to 107 Adjusting bus send levels 141 Adjusting general clip properties 116 Adjusting mix 48 Adjusting several simultaneously 49 Assigning to busses 19 141 Assigning to effect chains 143 Assigning to soft synth controls 148 Automating parameters 127 130 Beatmapped 41 Changing clip types 116 Changing color 47 Color preferences 238 Copying clips and events across 108 Copying trips without copying events 109 Copying cutting pasting 47 Default properties 227 Deleting 47 Device selection 19 Duplicating 47 Effects 110 113 Envelopes 113 136 Folder 41 124 Managing clips 116 MIDI 41 Muting 19 48 Panning 20 48 113 136 213 Pitch shifting audio clips 109 Previewing clips 109 Properties 115 120 227 Renaming 47 Reordering 46 Resizing 46 Selecting events that use a specified clip 110 Soloing 19 49 Stretching properties 115 119 Using clips with 107 Using the Clip Pool 109 Volume 20 48 Working with 46 Transport bar 21 Transposing Beatmapped tracks to the project key 119 Keys within a project 97 Loop tracks to the project key 117 Project keys 96 Trimming events 63 Trimming sections 72
118. 3 Soft synth controls 144 Video 205 Adding notes 170 Adjusting section length 72 Adjusting the mix 48 Anchors Adding 119 Deleting 119 Moving 119 Reset beat anchors 119 Arming tracks to record 156 Assignable effects 142 144 148 152 Adding 142 Adjusting levels sent from tracks 113 136 Assigning tracks to 143 Automation 129 Deleting 144 Routing to busses 143 Saving effect packages 151 Volume envelope 132 Assigning patchmaps 199 Audio Clip Properties window 115 Audio device preferences tab 230 Audio effects Automation 130 Audio Plug In window 23 110 113 Audio preferences tab 230 Audio properties tab 35 Audio signal flow 31 32 Automatic crossfades 66 Changing fade types 67 Creating 66 Automating Effects 113 136 Mixer controls 152 Surround panning 217 219 Automating VSTi parameters 185 Automation Adding envelope points 132 Adding volume or pan envelopes 128 Adjusting volume or pan settings 128 Assignable effects automation 129 Bus automation 128 Drawing envelope points 132 Editing envelopes 132 Generic control surfaces 259 Latch mode 137 MIDI controller 131 MIDI program change 132 Modes 136 Mute automation 127 Recording 137 Showing or hiding controls 127 Thinning envelope points 133 Touch mode 137 Track automation 127 Track effect automation 130 Volume or pan 128 Balance panning model 113 216 Beat ruler 21 Beatmapped tracks 41 Str
119. 38 Previewing in Chopper 101 Previewing in Explorer 36 Reloading 119 Replacing 120 Resolving offline 84 Saving track properties to 120 Searching 81 Tagging 77 Media libraries Tagging files 77 Media library Adding media files 75 Backing up 80 Creating new 75 Opening 75 Removing media files 77 Media Manager 38 75 Adding custom columns 86 Adding media from 84 Automatically hiding Search pane 85 Customizing view 85 Moving columns 86 Moving the Search pane 85 Options 86 Resizing columns 85 Resolving offline media 84 Searching for media files 81 Showing hiding columns 86 Media Manager window 23 Merging controller data from MIDI clips 187 Meter resolution 148 Metronome 157 MIDI 163 198 202 Adding notes 170 Adding patch changes to a file 145 Adding tracks 163 Assigning patch maps 199 Automating VSTi parameters 185 Choosing a drum map for a track 201 Configuring a soft synth for external output 147 Configuring input filters 179 Controller automation 131 Controller envelopes 183 Creating patch maps 198 Deleting controller envelopes 136 Deleting notes 170 DLS sets 196 Drum maps 168 200 Editing drum maps 200 Editing events 43 Editing patch maps 199 Exporting files 203 Filtering events 173 Inline editing 167 Input button 19 List editor 191 MIDI merge recording 166 Notes and frequencies 194 Output button 19 Panic button 197 Patch maps 19
120. 44 4 dqdidididi adi did ai ai aid 4 C Show all controllers Hide all Envelopes Reset all Envelopes Remove all Envelopes 1 From the View menu choose Track Properties The Track Properties dialog is displayed 2 Select the check box for each controller you want to automate with an envelope If the controller you want to automate isn t displayed select the Show all controllers check box at the bottom of the dialog 3 Clickthe down arrow inthe Envelope box and choose a command from the menu Command Insert Envelope Show Hide Envelope Reset all envelope points Delete Envelope Description If the controller does not have an automation envelope No is displayed Click the down arrow and choose Insert Envelope to add an automation envelope to the timeline If the controller has an automation envelope Visible or Hidden is displayed Click the down arrow and choose Hide Envelope or Show Envelope to toggle its display Click the Hide all Envelopes button at the bottom of the dialog to hide all controller envelopes on the track If the controller has an automation envelope you can click the down arrow and choose Reset all envelope points to restore all points to the default value Click the Reset all envelope points button at the bottom of the dialog to set all points on all controller envelopes on the track to the default value If the controller has an automation envelope you can click the down
121. 5 E ee Yo 30d H Creating selections of a specific musical length You may want to create a selection with a length corresponding to a musical value You can easily do this in the software using the Chopper s selection shortcut menu 1 Create a selection or place the cursor in the Chopper For more information see Creating selections on page 103 2 Right click and choose the desired musical length from the shortcut menu A selection is created equal to the specified musical length Inserting increments In addition to creating selections the Chopper feature allows you to configure the sections of silence between selections painted on a track When you click the Link Arrow to Selection button 2 the increment arrow length is incremented with the selection length This forces the increment and selection lengths to remain equal thereby allowing you to insert selections seamlessly end to end in the project USING THE CHOPPER 103 104 Chapter 6 Selection and increment length linked Chopper selection inserted end to end three times When the Link Arrow to Selection button is toggled off the increment arrow is displayed in black and you are able to establish a increment length that is independent of the selection length The increment arrow can be set by dragging either end of the arrow or by using the increment shortcut menu When the increment length is greater than the length of the selection an appropriate am
122. 52 2 Select the Master bus track and press Shift V to add a volume envelope 3 Add and adjust envelope points to fade into and out of the project For more information see Choosing stereo pan types on page 113 APPENDIX C 263 264 APPENDIX C Adding build ups If you are attempting to build projects that escape the perceived limitations of computer generated loop based music you should concentrate on reproducing the subtle and not so subtle dynamics associated with live instrumentation One of the simplest but most effective examples of this is the build up When musicians play live there is a tendency to increase dynamics as a song enters a chorus or refrain Think of how a drummer uses accents drum rolls and fills that steadily increase in volume to enter a song or indicate an approaching change from verse to chorus or chorus to bridge This effect is easily reproduced by adding a volume envelope to the track Add points at the various drum beats and adjust them so that the volume steadily increases For more information see Adding volume or pan envelopes on page 128 Creating wah wah effects with automated Track EQ You can use the automatable Track EQ effect to create a custom wah wah effect on a track The example below provides sample values to use in the Track EQ plug in but you can adjust the settings to suit your taste 1 Click the Track FX button Fl on the track to which you want to add the effect The Audio Plug In
123. 7 87 1244 5 A3 45 110 00 E7 88 1318 5 A 3 46 116 54 F7 89 1396 9 B3 47 123 47 F 7 90 1480 0 C4 48 130 81 G7 91 1568 0 C 4 49 138 59 G 7 92 1661 2 D4 50 146 83 A7 93 1760 0 D 4 51 155 56 A 7 94 1864 7 E4 52 164 81 B7 95 1975 5 F4 53 174 61 C8 96 2093 0 F 4 54 184 99 C 8 97 2217 5 Creating events Pitch C1 C 1 D1 D 1 E1 F1 F 1 G1 G 1 A1 A 1 B1 C2 C 2 D2 D 2 E2 F2 F 2 G2 G 2 A2 A 2 B2 C3 C 3 D3 D 3 E3 F3 F 3 MIDI Key Frequency 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 16 352 17 324 18 354 19 445 20 601 21 826 23 124 24 499 25 956 27 500 29 135 30 867 32 703 34 648 36 708 38 890 41 203 43 653 46 249 48 999 51 913 55 000 58 270 61 735 65 406 69 295 73 416 77 781 82 406 87 307 92 499 Pitch G4 G 4 A4 A 4 B4 C5 C 5 D5 D 5 E5 F5 F 5 G5 G 5 A5 A 5 B5 C6 C 6 D6 D 6 E6 F6 F 6 G6 G 6 A6 A 6 B6 C7 C 7 MIDI Key 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 Frequency 195 99 207 65 220 00 233 08 246 94 261 63 277 18 293 66 311 13 329 63 349 23 369 99 391 99 415 31 440 00 466 16 439 88 523 25 554 37 587 33 622 25 659 26 698 46 739 99 783 99 830 61 880 00 932 32 987 77 1046 5 1108 7 In addition to editing existing events you can also create new events 1 ik WN Quantizing
124. 8 Piano roll editor 187 Playback devices 196 Playing a soft synth with a MIDI device 146 Playing from external devices 197 Preferences 232 Processing events 173 Program button 19 Program change automation 132 Program change keyframe 184 Quantizing 190 195 Recording 164 Rendering 197 Resetting ports 197 Routing to hardware 196 Selecting notes 169 Signal flow 33 34 Soloing external MIDI inputs 147 Step recording 165 Sysex keyframes 185 Timecode synchronization 201 202 Track envelopes and keyframes 183 Track Properties 176 Track properties 176 Tracks 41 MIDI Clip Properties window 186 MIDI control surface setup 204 256 258 MIDI merge recording 166 MIDI merging controller data 187 MIDI track envelopes and keyframes 183 MIDI tracks Adjusting clip properties for 120 Device selection 19 Mixer setup external 155 Mixer window 51 53 141 152 Index vV vi Index Automating controls 152 Routing surround through 211 Working with mixer controls 148 Working with multiple controls 151 Mixing to a single track 125 Monitor for video editing 207 Moving Events 43 Tracks 46 Moving a section label 73 Moving sections 73 Multichannel MIDI files 163 Multipurpose slider 20 48 Multistream MIDI files 163 Mute automation 127 Muting Mixer controls 148 Tracks 19 48 N Note durations 173 Note velocity 173 O Offsetting tracks 262 One
125. 8 TABLE OF CONTENTS Recording into an empty track ccc cece cece eee eee e een e eee e seen eeeeeeees 157 Recording into atime Selection 2 0 ccc ccc cece ee eee ene e eee eee eeeeees 158 Recording into AN event 2 0 ccc eee ee eee eee eee eee e eee e eee e eee ee ee eeeees 158 Recording into an event with atime Selection ccc ccc ccc cc cece eee eee eee eeees 159 Working with multiple recorded Clips cece cee eect e eee e eee e eee eeees 159 Specifying where recordings are stored ccc cece cece eee eee eee eeeeeees 160 Changing where recorded files are stored for new projects ccc cece e eee e eens 160 Changing where recorded files are stored for individual projects cc cece ee eee ee 160 Monitoring audio levels ccc eee ee eee ee ee eee eee e eee e eee eeeeees 160 Using record input monitoring 6 ccc cee eee eee e eee e eee eee eeeees 160 Working Wit MIDI ncsenneuda vine maeceauedes sateen taeneunsoeenae nae eaa 163 Adding MIDI tracks and files ccc ccc cece eect eee ee eee eneeeeeeeneees 163 Adding MIDVERACKS sererieicrrseiesrenis reece esis we chen de eas eu Cok dd EEEE 163 Adding MIDI files to a PIO ECE can cein c dani envi awhdeadeewk iden aw er CadenG and ah ete edsaenwe 163 Recording MIDI wandotinneeveseucesee sqsoneer ees nebie pea wusenawteeosunaewtaresenos 164 Setting up a MIDI controller for recording into a track cece cece eee teen eens 164
126. A NE E N a 65 Splitting a time selection 2 0 cece ee EEREN NEN e eee eee eset ee eeeeeees 65 Splitting events within a time Selection ccc ccc ccc eee e cece e eee e eee eeeeeeeees 66 JON NO CVGMES 276 5 655 use E eeenngecaened seed sae ieee eed EINEAN EAAS 66 Automatic ClO SSIES cas eloan ea neared eeate iacnee eek hd ieee on eed ees 66 SEEEN E E 4c 0 ok sco E E E N E E E E E 66 Changing fade Wy Sr owe vase sca eeno ANENE EE EEEO cece EAE 67 PID OIG COILING oee EEEE E EE EEA EEE EEEE 67 Cutting events in ripple editing mode cece eee cece cece eee e eee e eee eeeeeaees 67 Deleting events in ripple editing mode ccc ccc ccc cece eee eee eee e eee n ee eeeeees 68 Pasting events in ripple editing mode ccc ccc ccc cece eee eee ee ee eee eeeeees 69 Slipping and sliding SVENES ovis icc dcd honk ede heed bh ates ae Biba ew eas edweredeeveeneennns 69 Shifting the contents of slipping events cece cece eee cece e ene e eee eeeeees 70 SHO THIMMING EVENTS soy ioniaodecewteesdecwsetesewn cbwseou deen sww outaeasien tacts EEA 70 SHANGO OVON craw cutee nose E ENEA EERTE tone NEE NET TORNE 70 Changing event properties cece cece cece ee eee eee e teen teense eens eeeeeeenes 70 Using event envelopes 2 0 ccc ccc ccc cc ccc cece eee eee eee eee eee eee ee eeeeeeenes 71 Setting an event s volume envelope 6 cece eee ee eee tenet eee eeeeeeeees 71 Setting an event s fade in and out envelope curve
127. ACID Pro 6 Professional Music Workstation Revised October 27 2006 After ACID software is installed and you start it for the first time the registration wizard appears This wizard offers easy steps that allow you to register the software online with Sony Media Software Alternatively you may register online at http www sony com mediasoftware at any time Registering your product will provide you with access to a variety of technical support options notification of product updates and special promotions exclusive to registered ACID users Registration assistance If you do not have access to the Internet registration assistance is available during normal weekday business hours Please contact our Customer Service department by dialing one of the following numbers Telephone Fax Country 1 800 577 6642 toll free US Canada and Virgin Islands 608 204 7703 for all other countries 1 608 250 1745 Fax All countries Customer service sales For a detailed list of customer service options we encourage you to visit http mediasoftware sonypictures com support custserv asp Use the following numbers for telephone support during normal weekday business hours Telephone Fax Country 1 800 577 6642 toll free US Canada and Virgin Islands 608 204 7703 for all other countries 1 608 250 1745 Fax All countries Technical support For a detailed list of technical support options we encourage you to visit http mediasoftw
128. ACID projects with embedded media When you open an acd zip project the project file and all media files are copied to the temporary files folder Note You can customize the location of the temporary files folder For more information see From the Options menu choose Preferences to display the Preferences dialog on page 227 Any changes you make to the project are saved to the files in this temporary folder until you save the acd zip file again For more information see Saving projects on page 54 Getting media files Now that you ve created a new project or opened an existing project the next step is to add media to the project You can use the Explorer window to locate preview and add media to your project You can also extract audio from a CD or download media from the Web If you have ACID you can also use the Media Manager to locate and add media files Previewing media from the Explorer window The Explorer window allows you to preview files in looped playback at the current project tempo before adding them to your project You can also preview files in the Explorer in conjunction with playing your project thereby allowing you to preview how a file will sound in the project To preview files use the Start Preview Stop Preview m and Auto Preview buttons at the top of the Explorer window Previewing a media file 1 Select the media file in the Explorer window that you want to preview 2 Click the Start Preview but
129. CD dialog appears 3 Ifyou have more than one CD drive choose the CD drive that contains the audio you want to extract from the Drive drop down list 4 From the Action drop down list choose how you want to extract audio E Extract Audio from CD Actor Read by track k e Choose Read by track and select each track a you want to extract Each track is extracted to a 7 eea oe new track in your project 00 02 33 0204 65 02 02 32 ey e Choose Read entire disc to extract the current 0204 65 044865 0244 00 04 48 65 08 17 23 03 28 33 P OAE we 08 17 23 11 05 13 02 47 65 Choose Read by range and enter a starting 11 0513 1341 60 023647 time and ending time or a starting time and 1341 60 1716 63 0335 03 length The time range is extracted to a new 1216 63 13 53 70 0237 07 ak UO 19 53 70 2459 00 05 05 05 your project 24 59 00 27 36 53 0237 53 27 36 53 30 18 60 02 42 07 30 18 60 3400 08 0241 23 HT Click Play to preview your selection In order to preview your CD drive s audio output must be connected to your sound card or you can connect headphones to the front of the CD drive Drive F HL DT ST DVD ROM GDR81628 0015 5 From the Speed drop down list choose the speed ee at which you want to extract audio Selected length 00 00 00 Click OK The Save As dialog appears 7 Enter a file name and choose a location for the new file s Tip Extracted tracks can be automatically named for you From the Options menu
130. Configuring a generic MIDI controller You can configure up to five generic MIDI control surfaces to work with the ACID interface For information about your specific device please refer to the manufacturer s documentation Notes Ifyou have a MIDI controller that includes buttons and knobs or faders you can use the device as an external control device and as a MIDI input device for recording MIDI for example you can use the buttons knobs and sliders on the device for external control and still use the keyboard pitch wheel and modulation wheel for recording MIDI For more information see Recording MIDI on page 164 MIDI messages that are mapped to external control functions are filtered when you record MIDI If a note message is assigned to a control surface function both the note on and note off messages will be filtered Effects parameters cannot be adjusted with a generic controller Important A generic control surface can control either trim or automation settings In order to control automation settings you must assign a button to place the control surface in automation mode and the Automation Settings laj button Latch on the track or bus you want to edit must be set to Automation Write Touch or Automation Write Customizing your control mappings 1 From the Options menu choose Preferences to display the Preferences dialog 2 Select the External Control amp Automation tab 3 Double click the Gen
131. Ctrl or Shift to select multiple grooves 2 Click the Duplicate Selected Grooves button S The duplicated grooves are added to the Groove Pool 3 To change the name of a duplicated groove right click a groove and choose Rename from the shortcut menu 4 You can then edit the duplicated grooves as needed Importing a groove You can use the Import Grooves button to add grooves from groove files or other media files to the Groove Pool of your project 1 Click the Import Grooves button in the Groove Pool window The Import Groove dialog is displayed 2 Select the groove or media file you want to add Information about the file is displayed at the bottom of the dialog 3 Click the Open button to add the new groove to the Groove Pool Tip You can extract a groove quickly by dragging a file from the Explorer window or Media Manager window to the Groove Pool Exporting a groove Grooves are stored with your ACID project Exporting a groove allows you to save a groove in a file that you can use in other projects or share with other ACID users 1 Select a groove in the Groove Pool window 2 Click the Export Selected Grooves button i The Export Groove to File dialog is displayed 3 Choose a drive and folder from the Save in drop down list or use the browse window to locate the folder where you want to save your groove Note By default grooves will be saved in the folder specified in the Default groove folder box on the Fold
132. D online help from the Help menu choose Contents and Index provides setup information for several common ReWire mixer applications This information is intended to help you get up and running with ACID as a ReWire device For the most up to date information about using each ReWire mixer application please refer to the manufacturer s documentation Chapter 10 Recording Audio ACID software can record audio into multiple mono or stereo audio tracks while simultaneously playing back existing audio and video tracks You are limited only by the performance of your computer system and audio hardware Audio is recorded to a media file on your computer and into an event on the timeline You may record into an empty track a time selection an event or a combination of time and event selection Audio output from your computer during recording is not necessarily recorded with the new audio Recording does not alter any of the source media files in your project Even when recording into an existing event you are not overwriting the data in that event Instead the data is recorded into a new take for that event and saved to a media file on your hard drive For information about real time MIDI recording MIDI merge recording and MIDI step recording see Recording MIDI on page 164 Setting up your equipment There are numerous ways to connect your equipment to your system Refer to your equipment s documentation for specific setup instructions Th
133. DI thru output if desired 6 Click OK Assigning MIDI inputs to soft synth controls You can route MIDI input from an external device to any soft synth control in your project Note You can assign both individual tracks and external MIDI devices to a single soft synth 1 Inthe Mixer window double click the soft synth icon on a control 2 The Soft Synth Properties window appears 2 Click the External MIDI Input Port button and select the MIDI input device from the menu WORKING WITH MIDI 197 Soloing MIDI device inputs External MIDI devices can be routed to multiple soft synths or MIDI thru devices Soloing a MIDI device input prevents your device from playing through other soft synths and MIDI thru devices soloing the input through the selected soft synth control You can solo MIDI input on more than one soft synth control if desired 1 Double click the soft synth icon on a control 4 The Soft Synth Properties window appears 2 Click the Solo Listen to MIDI Input button el J Creating or editing program maps From the Tools menu choose Program Map Editor to display the Program Map Editor dialog You can use the Program Map Editor dialog to create or edit program maps for external MIDI devices A program map allows you to view program names in the track header and on the Output Settings tab of the Track Properties window when a MIDI track is routed to a hardware synth Program Map Editor MIDI Device
134. Deleting the selected tag s affects the current library only 1 Inthe Search pane select the tag s to be removed e To select a single tag click the tag e To select multiple consecutive tags click the first tag hold the Shift key and then click the last tag e To select multiple tags that are not consecutive hold the Ctrl key and click each tag 2 Click the Delete Selected Tag button to delete the tag from the current library A confirmation dialog is displayed 3 Click OK to remove the selected tags from the library Merging subtags Merging tags combines a selected tag with its subtags and removes the subtags from your library permanently To merge a tag with its subtags right click the tag and choose Merge Subtags into Selected Tag from the shortcut menu All subtags are combined with the main tag and the subtags are removed from the library All media formerly associated with the subtags is associated with the main tag Arranging tags in the tag tree Tags are displayed in a tree view in the Media Manager window You can organize tags hierarchically click the Expand button H in the Search pane to expand a list or click the Collapse button El in the Search pane to hide an expanded list You can drag copy and paste tags within the list to arrange them and create parent and child tags You can also display tags in a palette view by clicking the Change Tags View button E Editing tag names or images Double click
135. Drag the plug in to the chain area e Select the plug in and click the Add button 4 Rearrange the order of plug ins as needed by dragging plug ins to different locations in the chain or by selecting a plug in and clicking the Shift Plug In Left E and Shift Plug In Right E buttons 5 Click OK The Plug In Chooser dialog closes The Audio Plug In window displays the plug in chain and the settings for the plug in last selected on the Plug In Chooser dialog 6 Clicka specific plug in and adjust the effect s parameters manually or choose one of the presets from the Preset drop down list For more information about effect parameters click the Plug In Help button 1 in the Audio Plug In window Tip You can save an effect s parameters as a preset to be used in other projects To save a preset enter a name in the Preset box and click the Save Preset button 7 Click the Close button X to close the Audio Plug In window You can use a track effect chain as a default for all new tracks you create For more information see Setting default track properties on page 227 WORKING WITH TRACKS 111 112 CHAPTER 7 Automating plug in parameters You can automate the parameters of certain plug ins by adding envelopes to the track For more information see Adding or removing track effect automation on page 130 Arranging plug in chain order The plug ins are cumulative during playback For example when the track s signal pas
136. During recording your signal will be played back with the current track effects chain but a dry unprocessed signal is recorded When Auto is selected you will hear the input monitor signal when playback is stopped and during recording If you re recording into selected events you ll hear the input monitor signal only when the cursor passes over the selected events When On is selected the behavior is similar to Auto mode but you will always hear the input monitor during recording monitoring is not toggled on and off when recording in to a selected event Bass G 1 OlT iz ter Input Monitor j GFF vol 6 0 d6 Ij x Sterea On Mona H a Auto Note Your ability to monitor effects in real time is dependent on your computer s performance Effect automation envelopes are bypassed during record monitoring RECORDING AUDIO 161 162 CHAPTER 10 Chapter 11 Working with MIDI ACID software allows you to record MIDI tracks and edit MIDI in your projects The software provides two native OPT plug ins the piano roll editor and the list editor You can also render projects with MIDI tracks play MIDI from an external device and synchronize to MIDI timecode MTC Adding MIDI tracks and files You can add MIDI files to your project or create new MIDI files from scratch You can use MIDI tracks to record and play back data from synthesizers and other MIDI compliant equipment MIDI tracks can use mid smf wav an
137. EES 232 Using the VST Effects td s2ccucusopeacnieoneansc saad eeeseateiesnsosieiewarnanssnsadianss 234 Using the VST Instruments tab 2 0 ccc ccc cc cece eee eee e nent eee eeeenees 234 Using the ReWire Devices tab ccc ccc cece cece eee eee ene eeeeeeeees 234 Using he Video TaD so7cssbouss otas cater caudianadoeteawiasaden delat nadinavnngtetideabeods 234 SINGIN EQUING 1a acccrnsrsnnadeseeceenatiantaseeeseedehadeeesadistan assis enne 4 234 Usmo RNG SYM CCAD nn ore cccwacheow sew warneerasuuhceyekaunembenre ane aeubsnereraaeeneneoes 236 Using the Display tab ccc ccc ccc cece eee e eee e eee e eee eeeeeeeeneaes 238 USING tne Omer tab castes ase cepiesiecuduclaeedas E aE 238 USING the Folders taD caw vic nie cia eure aie bork o sania rar eGe Neen oaee AUASOEY MERTON OME i 238 Using the External Control amp Automation tab cece ccc ccc ccc ccc een eeeeees 239 Customizing keyboard shortcuts ccc ccc ccc cece eee e eee eee e eee eee eeeeeeeneees 240 Using Control Surfaces with ACID 0 ccc ccc eee e eee e eee eeeeeeeneeneceneeeeeeeeees 241 Connecting a control surface cece eee eee eee eee eee e eee eeeeees 241 Configuring ACID to use your control Surface ccc cece cence eee ene eeeeeeeeeee 241 Configuring or customizing your Control surface 66 ccc cece eee eee ne eeeees 242 Using your control surface csi csinstendceeeteadebsebantdhuwided tsir o ESSEN E SPEER CASERTA 242 Setting up a Mackie C
138. EN EOE EER 206 Irimming video events 2 0 cece cc cece eee aa EE Ai 206 Slipping and sliding video events cece cece eect ee eee eee e eee eeeeeeeeaes 206 Using the Video Preview WINdOW cc ccc ccc cc cect tence eee ee eeeeeees 206 Copying a frame to the clipboard ccc cece eee n ene e nent ee eeeeneeee 207 Using toolbar DUNONG enescnateas inner EENS EEEN NEINNAR 207 Using the shortcut MENU eee cece eee eee eee nett eee eee eee eee eee eeenees 207 VIEWING the status Dal vows ci ccanusigntdstucaddewaddeseeitiasisiaunutenetsadd8sesioutanacies 207 Previewing on external monitors ccc ccc ccc cc cece eee eee eeeeeeees 207 SCOMMO VIDEO ann crock cccng ieee Sone honaceenechene crake arene aceon esane teownenes cans 207 Working with 5 1 SULFOUNC 0 ccc ccc cece cece eee e eee e eee e eee eeeeeeeeees 209 Whatis 5 1 SUMTOUING ipod oer tas da se Gea AANRAAI EE ARSA 209 Setting Up surround NardWwalre cece cece cece teen eee e eee e ee eeeeeeaaaees 210 Setting UP SUFFOUNC PrOjectS cece t SARENA EEEIEE ARARA PENE 210 Routing to hardware in the mixer ccc cee eee eee e cent eeenenes 211 Assigning audio to the LFE channel 0 0 cece e cece cece eect ee eeeeeeeeeees 211 Adj sting VOIUIMNG lt oteesonsesus ves uevesee seb kiise dan Orin eepee se pecekereeeeeenays 212 Adjusting track volume ccc ccc cece cece en eee e eee e eee e eee eee eeeeeeeennees 212 Adjusting assignable
139. For this example let s set up a MIDI keyboard with 8 knobs to adjust track volume 9 Notes You can use this same process to assign a controller to any configurable parameter To adjust track volume we re selecting Channel x Fader in the Host Command list in step 10 below However if you wanted to adjust panning you could choose Channel x Pan or if you wanted to adjust the bus send level you could choose Channel x Send Effect parameters cannot be controlled with a generic controller From the Options menu choose Preferences to display the Preferences dialog Select the MIDI tab and verify that the port where your controller is connected is selected in the Make these devices available for MIDI input list Select the External Control amp Automation tab From the Available devices drop down list choose Generic Control and then click the Add button The Generic Control is added to the Active control devices list Double click the Generic Control entry in the Active control devices list to display the Configure Generic Control dialog Verify that the port where your controller is connected is selected from the MIDI input drop down list at the bottom of the dialog Because the MIDI keyboard in our example has 8 knobs type 8 in the Number of channels box Now let s assign buttons to shift the channel banks up and down so you can control all the tracks in your project For example when you start using the controller the
140. Go to Out button to move the cursor to the end of the loop region Hold the Shift button while pressing the Event Trim Center Cursor button to center the cursor in the timeline view APPENDIX B 253 254 APPENDIX B Item Description 7 RTZ Press to move the cursor to the beginning of the project End Hold the Shift button while pressing the RTZ End button to move the cursor to the end of the project Transport buttons The Transport buttons allow you to navigate the timeline and preview your project y ha IBA Vo a p W E e We jab 13 2 MW 6 l FTN t 1 ae ae el Rae a S E 2 p Aa 3 4 5 Item Description 1 Rewind Press and hold to move backward through the timeline at 20x speed 2 Fast Forward Press and hold to move forward through the timeline at 20x speed 3 Stop Press to stop playback and return the cursor to its position before playback started 4 Play Press to start playback Press again to stop playback and leave the cursor at its current position 5 Record Press to start recording Press again to stop recording and leave the cursor at its current position Hold the Shift button while pressing the Record button to render the current selection to a new track Arrow buttons The arrow buttons allow you to navigate the timeline and preview your project MACKIE oo N ia j ia ia a l x e2 2 2 2 2 ee fe es ee a er e per 1 ES EZ EI yA ES d gt 2
141. Guitar 03 GM Electric Guta E e r Q vol 12 0 dB eElectricGu Keyframe Adding panning keyframes With panning keyframes turned on you can add keyframes at any location along the track or bus track 1 Position the cursor where you want to begin panning the track 2 Select the Automation Settings button on the track you want to pan 3 Double click the surround panner to display the Surround Panner window 4 Adjust the panning settings For more information see Using the Surround Panner window on page 214 Note You cannot automate muting including channels 5 Close the Surround Panner window A keyframe with the pan settings you created appears below the track at the cursor position Tip You can also add keyframes by double clicking the keyframe row or by right clicking the row and choosing Add Keyframe from the shortcut menu Once you ve added the keyframe double click it to adjust panning settings in the Surround Panner window As you add keyframes to a track or bus track the Surround Panner window shows the path of the panning keyframes The Smoothness slider controls the smoothness of the interpolation path between the keyframes For more information see Adjusting the Smoothness slider on page 219 Inf Inf om o Fo ae 19 7 Inf 6 4 5 6 Inf Inf x Add Channels 0 dB Center A Add Channels 0 dB Center A Add Channels 0 dB Center W
142. IE ta sseiad EAE EAE EE EE EEA AA EREA AEREA 46 Changing track COl eerrersiosrien retroa nenea EEEE TEENAAN 47 Renaming a CKS eera ETE E EEEE 47 DUNC OUACKS perriidriris rN EEEE EEE 47 BS TACKS E E E ET E E E T E unre oees 47 Copying cutting and pasting tracks sssesessesesessesesersesorsesesersesesosroereso 47 ATE Ra EA e E E E A NE E E E es clades 48 MUTO CKS oane AE E E S E A E R N 48 SaO ELL Ta E E E E E E E E E E EE E E E T 49 Working with groups of tracks cece cece cee eee eee een eee e eee eeenneeeees 49 Using undo and FCO 5 025005 Soned Given Pobre EEr sce Ris beads eew tO nee the wen hewnes 49 USING UNO PETE cee aees dine eau ai owas cea seaton dese vaeann nin A E uaee eee ee 49 Undoing CONS serre sce vovercsuraeuoces clewiawodasates ieueteana wor ainetuw PEENE EE 49 UROTE O aee E A cece A uss E tye usa EA E EE A EEE 49 Clearing the undo NISlONY ererssgrs sirini Eorna ARN EAEE NENA RIES INET EEA 50 Playing tac DLO CC scd e5ncesuse rar eterned ATII ERITREEA ERE ENAA ANNAE 50 Using the transport Daf seerrisseras aaeeea EA E EEE ERA A T 50 Usmo playDackOptONS ccsacceensodeenteedsanss EENEI SIANEL TEENE A RATER N 50 Using the VIXer WINDOW 44 00 d0 lt 00sa0bed sic tebe sdOewedeendbews Ses IA N EE 51 Viewing the Mixer WINGOW ccc ccc ccc cc cee eee e eee eee eee teen eeenenees 51 Sing the Mel 160d s acasorsneeseeaswesnensneeuseansesaaeiia eae 05 Nees Sakes anes eenens 52 Renaming mixer COMMONS 0i5 550cs101wdew
143. If your audio stutters when you start playback try selecting this option Drag the slider to set the number of audio buffers that will be used Adjusting this setting can decrease gapping or help you synchronize the input and output for record input monitoring Choose a setting from the drop down list to indicate the buffer size you want to use Choose a setting from the drop down list to set the priority that is assigned to your audio buffers Increasing the buffers priority can help you attain smoother playback but it can also adversely affect other processes Description In the Hardware Port column select the MIDI devices that you want to be available for track playback pg 196 and generating MIDI clock pg 202 In the MIDI Thru From column right click an entry and choose a MIDI device from which the device selected in the Hardware Port column will accept incoming MIDI To load a program map for a hardware synth right click the Device box for your MIDI device and choose Load Device Template from the shortcut menu The selected program map will be used for any track that is routed pg 196 to the MIDI device The device name will be displayed on the MIDI Output button on the track header and the programs from the device map will be available when you click the Program button in the track header To assign an input device to a MIDI output port right click the Device box choose Input from the shortcut menu and then ch
144. K acccrewstenonear uns tensdwdaaudauidw ance eawede OE uae iews 202 TABLE OF CONTENTS 9 EXDOreing MIDI TIES s crc uerunscounsscissomenuwes RENREN ENA ENA 203 Saving MIDI clips TOF GXPOll lt 2xsnuetsacnceuavedentanesniovea ees canenisd NETERA 203 Exporting the project to a standard MIDI file 0 ccc ccc cence cece een e eens 203 Configuring a Mackie Control Universal ccc ccc cc cece eee teen eeeeees 204 Configuring a Frontier TranZPort 0 ccc cece eect cece ene eee e eee eteeees 204 Configuring a generic MIDI controller 0 0 cee eee e tenet ee eeees 204 WORKING WIKI WICEO 5 5 cud oe asedsaauuheeenedsawsundocidnsutoeesusrcuasusdaeensaeds 205 Managing WINGO ss srb entices toes a eed ee he ee tian ee eh oh ek eee enw eee 205 Adding or replacing video files ccc ccc ccc eee cece een n eee e eee eee eeeeneeneees 205 Removing the video track cece ccc ccc cee eee e eee eee eeeeeees 205 Hiding and showing the video track cece ccc ccc ccc eee eee eee eee eee eeeeees 205 Synchronizing audio ANd VIDEO ccc cece ccc eee e eee AREKEA INEEN REIS 205 REMOVING the video s audio is0ewocsesns anwar beens eoecaien dest dewdeus senwiaies kerecdvad 205 Changing frame numbering ccc cece eee nee eee e nent ee ee eeeeeeeennes 205 Editing video events 2 ccc cee eee e eee eee eee eee eee e eens eeeeeeees 205 MOVING video events xcciaucdsden snd wots dwetdneeedadeeiaeer boa EE EEEE EE
145. Locking envelopes to events Track envelopes extend for the length of a track and are independent of the events on the track This means that the envelope remains in place when you move the events in the track However track envelopes can be set to move with the underlying events thus preserving the timing of envelope points in relation to events To lock all of the envelopes in a project to the events in which they occur click the Lock Envelopes to Events button lt 3 or from the Options menu choose Lock Envelopes to Events You can turn this feature off by clicking the button again The original event Moving the event with Lock Envelopes to Events turned on Moving the event with E Lock Envelopes to Events turned off Hiding track envelopes After you have created your envelope and set your envelope points you may hide the envelope Hiding an envelope does not affect the envelope point settings or track playback Hiding volume pan bus or assignable effect envelopes 1 Select the track s whose envelope s you want to hide 2 From the View menu choose Show Envelopes A submenu appears A check mark next to an envelope type indicates that it is visible in the track view 3 From the submenu choose the type of envelope you want to hide The specified envelope type no longer appears in the track view for the selected track You can use the same steps to display the envelope again Tip Select a track and press V to
146. M LABEL FILENAME HotSpotBrowse MM SS LEFT TOP RIGHT BOTTOM LABEL URL HotSpotSeek MM SS LEFT TOP RIGHT BOTTOM LABEL MM SS The Parameter box for a typical HotSpotBrowse command for a hotspot rectangle that is 50 pixels wide by 20 pixels tall and lasts for 10 seconds would look like this HotSpotBrowse 00 10 0 0 50 20 Sony http www sony com mediasoftware All parameters are optional except the last The hotspot defaults to the entire duration of the file and the entire video frame if the duration and dimensions are not specified Adjusting tempo to match cursor to marker Position the cursor right click the marker tab and choose Adjust tempo to match cursor to marker from the shortcut menu The project tempo changes so that the cursor position matches the selected command marker Deleting command markers To delete a command marker right click the marker and choose Delete from the shortcut menu Working with regions Regions are useful tools that allow you to subdivide your project into time sections by designating in and out points along the timeline Regions can function as permanent time selections for playback and editing purposes Like markers regions can serve as reference points and may be moved named and provide snap points for the cursor and events When you place regions they are automatically numbered in the order that you place them Placing and moving regions Regions are placed at the
147. M drive for installation from a DVD only Supported CD recordable drive for CD burning only Microsoft DirectX 9 0c or later version 8 1b included on DVD ROM Microsoft NET Framework 1 1 included on DVD ROM Internet Explorer 5 1 or later included on DVD ROM Internet connection for Gracenote MusiclID Installing ACID Prior to installing the software we recommend that you exit all open applications and temporarily turn off any virus protection 1 Insert the application disc The setup screen appears if AutoPlay is enabled for your CD ROM or DVD ROM drive Note f you have disabled the AutoPlay feature click the Start button and choose Run In the Run dialog that the CD ROM or DVD ROM drive letter and add setup exe Click OK to start the installation 2 Click Install The installation process begins 3 Follow the on screen prompts to install the appropriate version of the software for your computer Note Windows Installer is used for all versions of Windows Windows Installer is installed and then you are asked to restart your system Using online help You can access two varieties of help within ACID e Online help e What sThis help also referred to as context sensitive help Online help To access online help choose Contents and Index from the Help menu or press F1 Note To view online help Internet Explorer 5 1 or later must be installed on your system If you purchased the boxed version of ACID I
148. MIDI events rding Envelope automation reco Freehand envelope drawing on the timeline Enhanced paint tool for MIDI one shot and Beatmapped clips Audio track buffering for increased playback performance Support for control surfaces including the Mackie Control Universal and Frontier TranzPort Gracenote music recognition technology for extracting audio from CDs Film style panning mode for 5 1 surround projects SISSI The Contents tab provides a list of available help topics Double click a closed book to open the pages and then click a topic page 7 The Index tab provides a complete listing of the help topics available Scroll through the list of available topics or type a word in the Type in the keyword to find box to quickly locate topics related to that word Select the topic and click aan The Search tab allows you to enter a keyword and display all of the topics in the online help that contain the keyword you have entered Type a keyword in the Type in the word s to search for box and click ust Topics Select the topic from the list and click isee The Favorites tab allows you to keep topics that you revisit often in a separate folder To add a topic to your favorites click on the Favorites tab What s This help What sThis help allows you to view pop up window descriptions for ACID menus buttons and dialog boxes Choose What s This from the Help menu press Shift F1
149. Native Instruments B4p OD E Program Group all Groups M i x Program Name Prog MSB LSB iP Rock and Roll 1 0 0 o o o Program Map Description Creating program maps 1 From the Tools menu choose Program Map Editor to display the Program Map Editor dialog 2 Click the New button B to create a new program map You ll be prompted to choose a file name and location where you want to save the new map Tip Ifyou want to create a program map based on an existing map load a program map and then click the Save As button A to save a copy of the program map with a new name 3 Click the Add New Program F or Add New Drum Program P button to add a program to the table in the first available slot Note fa group is selected from the Voice Group drop down list the table lists only programs that belong to the selected group Any programs you add will automatically be associated with the selected group 4 Type a description of the program in the Program box You can double click an existing name to edit it 5 Ifyou want to assign the program to a group right click the Group box and choose a group from the shortcut menu If you want to create a new group choose Add New Group and type a name in the box 198 Chapter 11 6 Double click the Prog MSB and LSB values to edit them and type the values that correspond to the appropriate program Please refer to your device or its documentation to determine the correct val
150. O audio device e F5 When the Pan button is selected press the Settings button and then hold F5 while pressing the V Pot to change the bus or assignable effects output fader to Pre FX or Post FX When the Sends button is selected press the Settings button and hold F5 while pressing the V Pot to change a track s bus or assignable effects send level to Pre Volume or Post Volume Press the Sends button to scroll through the available bus and effects sends F6 Press the Settings button and hold F6 while pressing the V Pot on a channel to return the channel s settings to the track defaults Fader Banks buttons The Fader Banks buttons control the behavior of the channel section controls Item 1 Bank 2 Channel 3 Flip Display buttons MACKIE a D j pas pasas pam a AE g c a ae aie le le Toe E l a l AA QOoodoOoOO0 sil b t 4 4 Oa EA EB EB EA EA EB ER E 5 a a i Pain seta ca E 4 8 MASTER Description Press the left or right arrow button to scroll the channels 8 units at a time For example if tracks 1 8 are currently displayed pressing the right arrow will change to tracks 9 16 Press the left or right arrow button to scroll the channels 1 unit at a time For example if tracks 1 8 are currently displayed pressing the right arrow will change to tracks 2 9 Hold the Option button while pressing either Channel button to change track order For example if track two is selected an
151. ORKING WITH 5 1 SURROUND 217 218 Chapter 13 Working with keyframes After you add keyframes you can work with them in much the same way as envelope points For more information see Using track automation envelopes on page 113 Moving keyframes Drag a keyframe to a new position below its track Duplicating keyframes Hold Ctrl and drag a keyframe to a new position below its track Editing keyframes 1 Double click a keyframe to open the Surround Panner window 2 Adjust the panning settings as desired and close the window Changing keyframe interpolation curves To control how the pan is interpolated between keyframes right click a keyframe and choose an interpolation curve type from the shortcut menu Keyframe interpolation curves control how the pan occurs over time Keyframe Interpolation curve Description os Hold No interpolation takes place The keyframe s settings are maintained until the next keyframe Panning is interpolated in a linear path Panning is interpolated in a fast logarithmic path Panning is interpolated in a slow logarithmic path Panning is interpolated along a smooth natural curve Adjusting the Smoothness slider The Smoothness slider controls the perceived motion of sound within the sound field among three or more keyframes When you drag the Smoothness slider to 0 the changes are interpolated between keyframes along a linear path As you increase the smoothness value the path between keyframes
152. One shot clips are displayed with a icon Editing a MIDI clip s time signature To change a MIDI clip s time signature right click a clip on the Clip Pool tab choose Time Signature from the shortcut menu and then choose a time signature from the submenu The time signature you choose will be used to display the grid on the OPT piano roll editor and to display M B T measure beat tick values on the OPT list editor For more information see Using the piano roll editor on page 187 For more information see Using the list editor on page 191 MIDI Track Envelopes and Keyframes With MIDI track envelopes you can adjust volume panning controller parameters program changes or Sysex commands dynamically over the duration of a track You can automate VSTi parameters using envelopes on the soft synth bus track To record track automation using the controls in the track header select the Automation Settings button EF When the button is not selected the controls adjust static trim levels Tips You can use the Display tab in the Preferences dialog to change the colors used to draw track envelopes Using custom envelope colors can help you avoid getting lost in a maze of envelopes when you re using track envelopes to contro MIDI controllers For more information see Using the Display tab on page 238 Adding a mute envelope 1 2 Select a MIDI track From the Insert menu choose Envelopes or right click in the track l
153. R is a measurement of the difference between a recorded signal and noise levels A high SNR is always the goal The maximum signal to noise ratio of digital audio is determined by the number of bits per sample In 16 bit audio the signal to noise ratio is 96 dB while in 8 bit audio the ratio is 48 dB However in practice this SNR is never achieved especially when using low end electronics SMPTE timecode is used to synchronize time between devices The timecode is formatted as hours minutes second frames where frames are fractions of a second based on the frame rate Frame rates for SMPTE timecode are 24 25 29 97 and 30 frames per second A soft synth is a software based synthesizer Downloadable Sounds DLS and Virtual Studio Technology Instruments VSTi are two types of soft synths You add a soft synth control in the Mixer window for each software synthesizer you want to use in a project A method of data transfer in which a file is played while it is downloading Streaming technologies allow Internet users to receive data as a steady continuous stream after a brief buffering period Without streaming users must download files completely before playback Tempo is the rhythmic rate of a musical composition usually specified in beats per minute BPM A threshold determines the level at which the signal processor begins acting on the signal During normalization levels above this threshold are attenuated cut The format by
154. Snap To Shift while dragging an Set an event s gain to 0 0 dB Shift Ctrl Keypad event press Shift after you Click S Render to new track Ctrl M Chop to new clip if the Chopper window has focus Split event s INTRODUCING ACID SOFTWARE 27 28 Chapter 1 Playback commands Description Keys Start stop playback Spacebar Toggle looped playback Q Ctrl Spacebar when the timeline or track view has focus Play from cursor F12 from any window Timeline commands Description Keys Record Ctrl R Description Keys Record Ctrl R Go to end of project Ctrl End Skip forward Page Down Description Keys Insert remove track volume Shift V envelope Go to using current time ruler Shift G format Toggle snapping F8 Ctrl Alt drag envelope point or segment Adjust envelope point value in normal increments without changing the point s timeline position Insert region R Toggle snap to grid Ctrl F8 Draw tool Ctrl D Select previous edit tool in list Shift D Mark out point for selection Oor Insert show hide track pan P envelope Insert time marker H Change tempo Alt drag time marker Insert tempo change T Insert time signature change Shift K Maximize timeline vertically F11 window docking area will be hidden Insert show hide track volume V envelope Shift F11 Maximize timeline horizontally track list will be hidden Track list commands Descrip
155. Tempo Change changes the tempo of all tracks until another tempo key time signature change marker is encountered e Time Signature Change changes the time signature of all Bealsipermeastte tracks until another tempo key time signature change Sess marker is encountered appears 3 Select the check boxes for the types of changes you want to occur Tempo Key Time Sigh HE at the cursor position p MW Key change SS Key Change changes the key of all tracks until another 7 Tempo change BPM fzoom E Cancel Time Signature change 4 Specify the desired change information and click OK to close the dialog A marker appears in the marker bar at the cursor position that displays the change information Editing tempo key time signature change markers There are several ways to edit the tempo key time signature change marker e Position the cursor on or after the marker and adjust the Project Tempo Project Time Signature or Project Key controls The marker s text reflects the change WORKING IN THE TRACK VIEW 97 e Right click the marker choose Edit from the shortcut menu and enter the appropriate change in the Tempo Key Time Signature Change dialog e Double click the marker and enter the appropriate change in the Tempo Key Time Signature Change dialog Adjusting tempo to match cursor to marker Position the cursor right click the marker tab and choose Adjust Tempo to Match Cursor to Marker from the shortcut menu The
156. The video moves with the event edge and the opposite edge of the event remains fixed Sliding video events Hold Ctrl Alt while dragging the video event to move the event while leaving the video in place The relative position of the video changes as when you slip an event Using the Video Preview window The Video Preview window is used to view the video as it plays or to view the frame at the cursor position To display the Video Preview window choose Video Preview from the View menu or press Alt 4 Video Preview icefield GL Copy Frame m Ext Monitor Toolbar buttons c Copy Frame Shortcut menu Back d Default Background ackground __ _ B g z Black Background white Background mi External Monitor Simulate Device Aspect Ratio Display at Media Size Show Toolbar Show Status Bar Status bar ideo 320x240 15 00 fps Display 320x240 Copying a frame to the clipboard The Copy Frame toolbar button in the Video Preview window allows you to copy the current frame to the Windows clipboard Using toolbar buttons The toolbar allows you to access two commonly used functions of the Video Preview window Button Description Windows clipboard ext monitor Sends the preview to an external monitor Using the shortcut menu Right click anywhere in the Video Preview window to display a shortcut menu with Video Preview window options Item Description Copy Frame Copies the current frame
157. To remove the unused media from your project choose Remove All Unused Clips from the Tools menu Click the Open button to display the Open dialog where you can browse to clips you want to add to the track Select a clip in the Clip Pool and click the Delete K button Only clips with a Use Count of 0 can be deleted You can use the Cut EJ Copy i and Paste el buttons in the Clip Pool window to cut copy and paste clips across tracks Selecting events that use a specified clip Right click an event and choose Select Events Using This Event s Clip from the shortcut menu to select all events on the track that use the same clip as the selected event Right click the timeline choose Select Events Using Clip and then choose a clip from the submenu to select all events on the track that use the specified clip Using track effects ACID allows you to use DirectX and VST plug ins at the track level Track level plug ins process everything on the selected track You can create plug in chains adjust the order of plug ins on a chain bypass plug ins remove plug ins and save frequently used chains as presets Tips Ifthe VST plug in you want to use isn t displayed in the Plug In Chooser you can use the VST Effects tab in the Preferences dialog to add the plug in s folder and then click the Refresh button to scan for plug ins For more information see Using the VST Effects tab on page 234 Ifthe DirectX plug in you want to use
158. Vda nde a eK een 261 D plicating WILT ONS Cl sssr eer aceaa a suawieuweda sane eee O a on nyeneeee ceed 262 Creating ping pong pan effects ccc ccc cece eee eee een e eee eeeeneeeeeeneees 262 Adding depth with assignable effects 0 ccc ccc cece cece eee eee eeeeeeeeeeees 262 Playing double time half time cc cece ccc cece cece ene eee e eee eee eeenenees 263 Constructing the wall Of sound 6 ccc ccc eee cece eee teen een neeeeeeeneees 263 Adding through subtraction wx cucawtestedintddueet ducers sates pueed lec dieew iene eus 263 TWEAKING HE dynamics nike 500055000944 esebaacevp shire koe eOho0s Ronn eeeee eee eee 263 Fading inand GUC Of MIXES eserasniri scons tansiaen eed senseavduadeande ens ieewiwatandaeeenuds 263 12 TABLE OF CONTENTS Adding DUNG UDS 14500250408eeos es eenst hhenveseteesteeeiedat tabu adie hie A 264 Creating wah wah effects with automated Track EQ ccc ccc cece eee ees 264 Making automated changes more Stark cc cece cece eee e eee e eee e eens eeeees 264 Abruptly changing volume OF pan ccc cece e eee e eee teen eeeeeneees 264 Turning automated effects On and Off ccc ccc cece cece eee e eee eee eennees 265 Making automated frequency changes more natural cece cece cece eee ees 265 Overriding COMpress eXPAN cece cece eee e ee eee eee eee e tees eset ee eeeeeeeeaes 265 Slicing and dicing in the Chopper ccc ccc eect eens eee eeee
159. Video Preview This window displays prerendered video files that can be imported and synchronized with an ACID project The video file displays during project playback and can be rendered with the project to an appropriate format Display the Video Preview window by choosing Video Preview from the View menu or pressing Alt 4 For more information see Using the Video Preview window on page 206 Media Manager This window displays the Media Manager which you can use to search for manage and tag your media files Display the Media Manager window by choosing Media Manager from the View menu or pressing Alt 5 For more information see Using the Media Manager on page 75 Track Properties This window allows you to change track attributes Display the Track Properties window by double clicking a track s icon or by pressing Alt 6 For more information see Configuring track properties on page 115 Surround Panner This window allows you to control panning in a 5 1 surround project Display the Surround Panner window by double clicking the surround panner on a track or mixer control or by pressing Alt 7 For more information see Working with 5 1 Surround on page 209 Soft Synth Properties This window allows you to change the attributes of soft synth controls in the Mixer window Display the Soft Synth Properties window by double clicking a soft synth control s icon or by pressing Alt 8 For more information see Using soft synth controls on pag
160. When the Settings button is selected hold the button and turn the V Pot to change the automation recording mode for each track and bus track Press to place the cursor at marker 2 or hold Shift and press to place the cursor at marker 10 When the Settings button is selected hold the button and turn the V Pot to change the current panning mode Press to place the cursor at marker 3 Press to place the cursor at marker 4 When the Settings button is selected hold the button and turn the V Pot to change record input monitoring settings when you re using an ASIO audio device Press to place the cursor at marker 5 When the Pan button is selected press the Settings button and then hold F5 while pressing the V Pot to change the bus or assignable effects output fader to Pre FX or Post FX When the Sends button is selected press the Settings button and hold F5 while pressing the V Pot to change a track s bus or assignable effects send level to Pre Volume or Post Volume Press the Sends button to scroll through the available bus and effects sends Press to place the cursor at marker 6 Press the Settings button and hold F6 while pressing the V Pot on a channel to return the channel s settings to the track defaults Press to place the cursor at marker 7 Press to place the cursor at marker 8 The Add New buttons add busses or tracks to your project Item 1 Track 2 Bus Description Press to add a new audio track Press to add
161. a Adjusting preview volume 52 Chopper window 101 Explorer window 36 Processing MIDI 173 Program change keyframes 184 Projects Adding media 37 Key 96 Opening 36 Playing 50 Properties 35 Publishing to the Internet 56 Rendering 54 Saving 54 Starting 35 Tempo 96 Time signature 96 Properties Clip 115 186 Event 70 MIDI track 176 MIDI track 174 180 176 Project 35 Track 115 Proxy file 273 Publishing projects 56 Creating personal accounts 57 Uploading 57 Punch in 159 QO Quantize MIDI 173 Quantizing MIDI In the list editor 195 In the piano roll editor 190 R Recording 155 Arming tracks 156 Into a time selection 158 Into an event 158 Into an event with time selection 159 MIDI tracks 164 Selecting track input devices 157 Specifying storage folder 160 Starting and stopping 157 Stereo left right channel options 157 Redo 49 Series of edits 50 Reference library 81 Sony Sound Series Loops and Samples 81 Regions 93 94 In the Chopper 102 Reloading Media files 119 Removing Audio from a video 205 Video tracks 205 Removing a section label 73 Renaming Mixer controls 52 Tracks 47 Renaming sections 72 Rendering MIDI projects 197 Projects 54 Supported formats 55 Surround projects 220 To new tracks 125 Using custom settings 56 Reordering tracks 46 Replacing Media files 120 Resetting MIDI ports 197 Resizing Tracks
162. a Drum One Shots A Ebow vibration 09 waw Guitar ee m E eee 5 A Ebow Vibration 10 waw Guitar A Ebow vibration 11 wav Guitar A Ebow vibration 12 way Guitar A Ebow vibration 13 way Guitar 13 items found out of 1 092 total theme amp Media Manager 3 Youcan refine the search results using any of the following methods e Select tag check boxes e Use the Advanced search controls For more information see Using advanced search options on page 83 e Choose Match Any from the Match Any Match All drop down list to display all media that matches any of your keyword tag or advanced search criteria Using this option in the search displayed in step 2 the Search Results pane would display all files that contain the keyword EBow OR the Guitar tag e Choose Match All from the Match Any Match All drop down list to display only media that matches all of your keyword tag and advanced search criteria Using this option in the search displayed in step 2 the Search Results pane would display all files that contain the keyword EBow AND the Guitar tag Searching using tags In the Search pane select the check box for each tag you want to find The Media Library searches your media files and displays the results in the Search Results pane on the right side of the window Choose Match Any from the Match Any Match All drop down list if you want to display all media that contains any keyword tag or advanced se
163. a clip in the clip list and then click the Play button to play it Click the Stop button to stop playback Changing an event s clip 1 Select the events you want to change 2 Right click a selected event and choose Event Clip The track s current clips are displayed in a submenu 3 Choose the clip you want to use from the submenu All selected events are updated to use the new clip Tip Press C or Shift C to change the selected event s clip by cycling forward or backward through the track s clips Pitch shifting audio clips You can use the Clip Properties window to pitch shift all events on the track associated with a specific clip For more information see Adjusting pitch shift on page 116 Using the Clip Pool You can use the Clip Pool to organize each track s media In the track header click the Paint Clip Selector button and then choose Clip Pool The clip list displays each track s clips the number of times the clip is used on the track and the path to the media file WORKING WITH TRACKS 109 110 CHAPTER 7 Clear a clip s check box to remove it from the Paint Clip Selector menu without removing it from the track To make the clip available again select the check box To set the active clip click the space next to a clip s check box The A icon indicates which clip will be used for creating events with the Draw or Paint tool Click the Remove Unused Clips button to remove all unused clips from the track Tip
164. a tag or right click a tag and choose Edit from the shortcut menu to display the Tag Editor dialog In the Tag name box type the name you want to display for the tag Select a thumbnail image to choose the icon that will be displayed for the tag in the Search pane and in the Search Results pane when the tag is added to a media file 4 Click the OK button to apply your changes and close the Tag Editor dialog Viewing or creating palettes The palette view provides another way of working with tags that can be useful for more focused searching You can use a palette to concentrate on a portion of the current tag tree In the palette view tags are displayed as a grid of buttons instead of the standard hierarchical tag tree 1 Click the Change Tags View button E to toggle the display of the tag tree and palette view 2 Click the down arrow next to the button to choose a saved palette or create a new palette Creating a palette 1 Click the down arrow next to the Change Tags View button FE and choose New Palette from the menu The New Palette dialog is displayed In the Name box type the name you want to use to identify the palette In the Rows box specify the number of rows of buttons you want to display in the palette In the Columns box specify the number of columns of buttons you want to display in the palette oa a Click OK to create the palette The palette is displayed as a grid with empty buttons Assigning palett
165. abilities in ACID Each edit you perform in the project is added to an undo history which allows you to quickly restore the project to any of its previous states In addition undoing an edit automatically places it in the project s redo history where it can be quickly re performed However any new edit performed on the project overwrites the redo history Note The undo and redo histories are cleared when you close the project or exit the application Using undo To undo an edit click the Undo button E on the toolbar or press Ctrl Z Edits are undone in the reverse order they were performed Tip You can also undo the most recent edit by choosing Undo from the Edit menu Undoing a series of edits Clicking the down arrow next to the Undo button m displays the project s undo history The history displays as a drop down list with the most recent edit located at the top Undoing an edit in the list requires all subsequent edits to be undone as well 1 Click the arrow to the right of the Undo button The undo history appears 2 Locate the edit to be undone Notice that all subsequent edits are automatically selected and the total number of edits to be undone is indicated at the bottom of the drop down list 3 Click the edit to be undone The project is restored to the state it was in prior to the selected edit Undoing all edits Choosing Undo All from the Edit menu undoes all project edits and automatically adds them to th
166. able for MIDI input box select the check box for the MIDI port that is connected to your control surface s Out port Note MIDI ports that are in use by a Mackie Control Universal or Mackie Control Universal Extender display a icon to indicate that they are not available for MIDI track input or playback 3 Choose your control surface a Select the External Control amp Automation tab in the Preferences dialog For more information see Using the External Control amp Automation tab on page 239 b Choose a device from the Available devices drop down list and click the Add button Adding a device loads its default profile If you want to customize the behavior of the control surface double click its entry in the Active control devices list Click OK to apply your changes and close the Preferences dialog 5 From the Options menu choose External Control to enable your selected control surfaces APPENDIX B 241 242 APPENDIX B Configuring or customizing your control surface Use the External Control amp Automation tab in the Preferences dialog to select the control surfaces you want to use and adjust their configuration For more information see Using the External Control amp Automation tab on page 239 1 2 3 From the Options menu choose Preferences to display the Preferences dialog Select the External Control amp Automation tab Choose a device from the Available devices drop down list and click the Add button
167. ack will begin automatically e Ifthe Auto Preview button is not selected click the Start Preview button E to begin playback If you have multiple files selected they will be played back sequentially Each file s icon will change to a play icon E during playback 3 Click the Stop Preview button i to stop the preview or turn off the preview feature by deselecting the Auto Preview button If the file is offline you ll be prompted to locate the file or choose a replacement Tip To preview a media file in its associated media player right click the file and choose Open with Player from the shortcut menu Adding media to your project After you ve added media to your library tagged it and searched for specific files or related media you ve probably found just the right piece of media for your current project You can add media to your project from the Search Results pane by performing any of the following actions e Dragging a file from the Search Results pane to the project timeline The file is added wherever you drop it Tip You can also drag files from the Search Results pane to the Windows desktop a folder or to another application that is an OLE object linking and embedding drop target e Double clicking a media file in the Search Results pane if the Double click in Search Results pane adds media to project check box is selected in the Media Manager Options dialog The file is added to the bottom of the track list
168. ad 5 Move left right one pixel Left Right Arrow and end of loop region Toggle previous selection Backspace Move left right to event edit points Ctril Alt Left Right Arrow including fade edges Go to end of project Ctrl End Create or extend loop region time Shift Left or Right Arrow selection Move right by grid marks Page Down Halve loop region selection length semicolon Go to Shift G Shift loop region selection right _ period using absolute time Event editing commands Description Keys Description Keys Paint the entire media length for all Ctrl click in timeline Join selected events J media except video only when Paint tool is selected Cycle event clip backward forall Shift C Reverse event U selected clips Select next edit tool in list D Slip Trim moves the media with Alt drag edge of event the edge as it is trimmed Undo Ctrl Z Slide move event while leaving the Ctrl Alt drag event underlying media in place Cut selection Ctrl X Copy selection Ctrl C Paste from clipboard Ctrl V Pitch down 4 semitones Shift Numeric keypad Shift Paste insert Ctrl Shift V Pitch down one octave Ctrl Numeric keypad Paste event at cursor Shift Y Reset pitch Ctrl Shiftt Numeric keypad or Ctrl Shift Move selected event s right one Numeric keypad 6 Change an event s gain setting by Shift Keypad or pixel 10 Keys Description Keys Description Temporarily suspend
169. age next to the command indicates that it is active Snapping to all elements With snapping turned on you may choose to snap to all elements From the Options menu choose Snapping and choose Grid Only from the submenu The button image next to the Grid Only command appears deselected when snapping to all elements Tip Press Ctrl F8 to toggle between grid only and all elements Changing tempo time signature and key You can set a tempo time signature and key for your ACID project You can also make adjustments during playback You can add specific tempo time signature and key changes within a project using tempo key time signature change markers These markers appear on the marker bar above the track view When the cursor passes over one of these markers the master project tempo key and or time signature changes in real time Set the tempo time signature and key for the whole project or change these elements dynamically in the timeline 95 E 3 4 22 A 44 o2 4 r 2y BPM 4 me Project Key Project Tempo slider Project Tempo Project Time Signature WORKING IN THE TRACK VIEW 95 96 Chapter 5 Changing project tempo You can change the tempo of a project without affecting the project s key Changing tempo using the Project Tempo slider Drag the Project Tempo slider at the bottom of the track list Dragging the slider to the left slows the tempo while dragging it to the right speeds the tempo
170. ain Groove Pool Ctrl Alt 2 Allows you to view and edit grooves in your project Clip Properties Ctrl Alt 3 For audio non MIDI clips allows you to change clip types loop one shot and Beatmapped and adjust time stretching pitch root notes tempo and downbeat For MIDI clips allows you to edit data using the OPT list editor or piano roll Docking and floating ACID windows The window docking area allows you to keep frequently used windows available but out of the way while you are working with a project You can dock windows either in a single stack spanning the width of the screen or divide the window docking area into sections e g right middle and left and create several stacks You can also create floating docks by dragging several windows to the same area on your screen Windows that are not currently visible in a stack display a tab that you can click to display it You can also expand restore or close a window using the buttons in the window s upper left corner Windows are displayed in fixed positions in the lower portion of the window APPENDIX A 221 222 APPENDIX A W Close window a Expand restore window TETE TI Drag handle a Chopper NY DANCE et Insert E 1 1 el pd 4l el didi aan ui 00 00 00 00 00 05 _ Chopper Media Manager Explorer j Tabs Note When the last window in the docking area is closed or removed the docking area minimizes automatically
171. ally recorded If a sample is resampled at a lower rate sample points are removed from the sound file decreasing its size but also decreasing its available frequency range Resampling to a higher sample rate extra sample points are interpolated in the sound file This increases the size of the sound file but does not increase the quality When down sampling one must be aware of aliasing APPENDIX D 273 274 APPENDIX D Sample Sample Rate Sample Size Sample Value Secure Digital Music Initiative SDM Shortcut Menu Signal to Noise Ratio Society of Motion Picture and Television Engineers SMPTE Soft Synth Streaming Tempo Threshold Time Format The word sample is used in many different and often confusing ways when talking about digital sound Here are some of the different meanings A discrete point in time which a sound signal is divided into when digitizing For example an audio CD ROM contains 44 100 samples per second Each sample is really only a number that contains the amplitude value of a waveform measured over time A sound that has been recorded in a digital format used by musicians who make short recordings of musical instruments to be used for composition and performance of music or sound effects These recordings are called samples In this manual we try to use sound file instead of sample whenever referring to a digital recording The act of recording sound digitally i e to sampl
172. ame rate of 29 97 frames per 29 97 fps second SMPTE Drop Displays the time ruler in hours minutes seconds frames with a frame rate of 29 97 frames per 29 97 fps second using dropped frame numbers SMPTE 30 30 fps Displays the time ruler in hours minutes seconds frames with a frame rate of 30 frames per second Audio CD Time Displays the time ruler in tt mmiss ff track number minutes seconds frames with a frame rate of 75 fps Using the ruler offset The ruler offset allows you to change the project ruler to start at a specific time Typically this feature is used in conjunction with SMPTE and MIDI projects when their timelines are the main reference Basically the ruler offset allows you to set the ACID time ruler based on another project s timeline for reference purposes i e the SMPTE or MIDI timelines When you enter a new value along the timeline the ruler s time units are adjusted at the cursor position and at the start of the timeline For example if the cursor is positioned at the 2 00 minute mark and you enter 15 00 minutes the start of the project will begin at 13 00 minutes The ruler offset feature works the same for all time formats 1 Position the cursor anywhere along the timeline 2 Right click the time ruler to display a shortcut menu 3 From the shortcut menu choose Set Time at Cursor A box opens at the cursor position 00 00 45 Enter a time value 5 Press Enter to set the cursor position
173. amed My Remix Track X Recording X wav If this check box is not selected recorded files will be named Track X Recording X wav Click to restore the Audio tab to the default settings Description Choose a driver type from the drop down list Microsoft Sound Mapper The default setting Allows the Sound Mapper to choose an appropriate playback device Direct Sound Surround Mapper Allows the Surround Mapper to choose appropriate playback devices for the front rear and center LFE channels in a 5 1 surround project pg 210 Windows Classic Wave Driver Allows you to choose a specific audio device using a classic wave driver For stereo projects choose a device from the Default Stereo and Front playback device drop down list For 5 1 surround projects choose devices from the Default Stereo and Front playback device Default Rear playback device and Default Center and LFE playback device drop down lists Audio device type continued Default Stereo and Front playback device Default Rear playback device Default Center and LFE playback device Playback buffering seconds Enable track buffering Default audio recording device Automatically detect and offset for hardware recording latency Advanced Default All ASIO Allows you to choose a specific audio device using a low latency ASIO driver For stereo projects choose a device from the Default Stereo and Front playback device from the drop down list For 5 1 surroun
174. ample to set a triplet interval in 4 4 time select the Tuplet check box and choose 3 in time of 4 b Click the Duration button and choose length of the note s sustain When you choose a duration longer than the step size notes will overlap cC To set the note on velocity for recorded notes type a value in the Velocity box If you want to record note on velocity from your controller select the As Played check box MIDI messages from your controller are recorded as you play them and notes are added to an event in the timeline Notes MIDI controller adjustments such as pitch wheel and modulation wheel movements are not recorded in step record mode If you press a key before releasing the current key both notes will be recorded at the same timeline position Release both keys to advance to the next step To stop recording close the MIDI Step Record dialog or click the Stop a button on the transport bar Using MIDI merge recording Click the MIDI Merge Record button to build a MIDI part by recording repeatedly into a loop region MIDI merge data is recorded in real time and you can add more notes each time recording passes through the loop region 1 Connect a MIDI controller to your computer If you don t have a MIDI controller you can use the keyboard in the track view when in MIDI timeline editing mode or the keyboard in the Soft Synth Properties window Note Not all VSTi plug ins can record using the keyboard in the Sof
175. an audio bus to your project Windows buttons The Windows buttons control the display of various ACID windows 1 2 3 Item Description 1 Mixer Press to show the Mixer window If the window is not docked pressing the button shows hides the window 2 Video Press to show the Video Preview window If the window is not docked pressing the button shows hides the Preview window 3 Plug Ins Press to show the Plug In Manager window If the window is not docked pressing the button shows hides the window View buttons The View buttons control the display of various sections of the ACID window N AAA RAMA iA AOC Ce veveveveveveve Se 2 Ee l E 4 l 4 4 06 eeeees 3 Item Description 1 Bus Tracks Press to show or hide audio bus tracks in the ACID timeline When the Video button is selected press to show or hide the video bus track 2 Dock Area Press to show or hide the Window Docking Area at the bottom of the ACID window 3 Track List Press to show or hide the track list in the timeline APPENDIX B 251 Modifiers buttons The Modifiers buttons extend the functionality of other buttons on the Mackie Control ac Od0 OF 4 4 t l 1 2 2 22 2 2 ee C oyoo mann eI me fos a 3 Item Description 1 Shift Hold the Shift button while pressing a button labeled with inverse text to perform the shift function For example hold Shift while pressing the Undo Redo button to reverse an undo action
176. and use the same file name with the extension acd bak You can use backup project files to revert to a project s previous state Select the check box if you want to maintain the pitch of Beatmapped tracks when the project tempo changes Select the check box if you want to start the Beatmapper Wizard when you add a file that is longer than 30 seconds to your project Select this check box if you want to update the ACID audio engine more slowly Selecting this option can prevent unwanted artifacts during timeline editing Select this check box to create a temporary project file that can aid in crash recovery Your project information is autosaved every five minutes without overwriting your project file Select this check box if you want to use ASPI Advanced SCSI Programming Interface when burning and extracting CDs ASPI enables host adapters and device drivers to share a single SCSI hardware interface Select this check box if you want to use SPTI SCSI Pass Through Interface to communicate with your CD burning drive Select this check box if you want file names to be automatically assigned to tracks that you extract from CDs File names include the CD s ID number and track number Select this check box if you want effects to remain open so you can bypass enable effects with no pause for A B testing When the check box is cleared effects are fully bypassed conserving processing power When this check box is selected a message b
177. anized within a folder track e For Type 1 MIDI files a separate track is created for each track in the MIDI file and all tracks are organized within a folder track 2 Add to Project with Events Adds the file to the current ACID project at the cursor position adds tracks to the track list and creates events for the MIDI note data on each track Envelopes are added to the tracks to represent MIDI controller data e For Type 0 MIDI files a separate track is created for each channel in the MIDI file and all tracks are organized within a folder track e For Type 1 MIDI files a separate track is created for each track in the MIDI file and all tracks are organized within a folder track WORKING WITH MIDI 163 164 Chapter 11 3 Add to Project with Events Rippled Adds the file to the current ACID project at the cursor position adds tracks to the track list and creates events Existing events are shifted downstream to make room for your MIDI file Envelopes are added to the tracks to represent MIDI controller data For Type 0 MIDI files a separate track is created for each channel in the MIDI file and all tracks are organized within a folder track e For Type 1 MIDI files a separate track is created for each track in the MIDI file and all tracks are organized within a folder track 4 Open as New Project Starts a new project adds tracks to the track list and creates events for the MIDI note data on each track Fo
178. ant to resolve e To select a single file click the file e To select multiple consecutive files click the first file hold the Shift key and then click the last item e To select multiple files that are not consecutive hold the Ctrl key and click each file 3 Specify how you want to resolve the selected files e Click the Smart Search button to search quickly and allow the Media Manager tool to suggest the replacement file e Click the Browse button to choose a specific replacement file e Click the Leave Offline button to leave the file offline The file will not be added to your project e Click the Remove button to remove the file from the media library The file will not be added to your project The original media file is not deleted Repeat step 3 for each file in the list 5 Click the OK button to preview the files or add the files to your project and update the media library with the replacement files Customizing the Media Manager window Much of what you see in the Media Manager window can be customized to suit your preferences Automatically hiding the Search pane Click the push pin button B in the title bar of the Search pane if you want to save space in the Media Manager window by automatically hiding the search pane e The push pin is displayed as a Ef when the Search pane is anchored in the Media Manager window e The push pin is displayed as a j when the Search pane is set to hide automatically Whe
179. appears if you have more than one bus in the project Adjusting the bus send level You can adjust the level of a track sent to a bus with the multipurpose slider in the track list Tip Bus sends are pre volume by default To change to post volume right click the multipurpose slider label in the track list choose the appropriate bus from the menu and choose Post Volume from the shortcut menu Routing busses to system hardware You can route individual busses to specific system hardware for output This allows you to configure busses to route output projects or individual tracks to sound cards recording devices mixing boards etc By default all busses are assigned to the Master bus In this configuration you can use busses for creating subgroups of tracks For example you could route all your drum tracks to a bus so you can adjust their levels together without changing their relative levels However you can also route busses to hardware outputs so you can use busses for sending tracks to external effects processors or for mixing on an external mixer Note During startup the application automatically identifies all hardware available for output on your computer and listed these components as options on the Audio Device tab in the Preferences dialog For more information see Using the Audio Device tab on page 230 USING THE MIXER 141 142 Chapter 9 To route busses to hardware you must first verify whether you are using a Windows
180. apply to the toolbar remain set until you change them again Hiding and displaying the toolbar If you prefer to use shortcut keys when working with your project you may hide the toolbar to create more workspace Choose Toolbar from the View menu to hide it The check mark next to the command is removed and the toolbar disappears The toolbar remains hidden until you choose Toolbar from the View menu to display it again Reordering toolbar buttons You can change the toolbar s button order to suit your preferences You may either reorder the buttons directly on the workspace or via the Customize Toolbar dialog Reordering buttons on the ACID workspace 1 Hold Shift and drag the button that you want to move to the new location on the toolbar A hand icon ey within an outline of the button indicates that you are moving the button 2 Release the mouse to drop the button in its new location Reordering buttons in the Customize Toolbar dialog The Customize Toolbar dialog allows you to control the order and functionality available on the Toolbar You may return the toolbar to its default settings by clicking the Reset button 1 From the Options menu choose Customize Toolbar The Customize Toolbar dialog appears ni Customize Toolbar k x Available toolbar buttons Current toolbar buttons Close ds Show Volume Envelopes a Paint Tool de Show Pan Envelopes lt 2 Trigger from MIDI Timecode Add gt
181. arch criteria In the example to the right the Search Results pane would display all files that contain the tag High Tom OR the tag Floor Tom Choose Match All from the Match Any Match All drop down list if you want to display only media that includes all keyword tag and advanced search criteria In the preceding example the Search Results pane would display only files with tags High Tom AND Floor Tom Note f you have check boxes selected for parent and child tags those tags will be treated as an OR relationship regardless of whether Match Any or Match All is selected Advancect Sorting search results Media Manager Explorer Groove Po Click a column heading to sort the results in ascending or descending order based on that column Viewing previous searches Click the Previous Search button 40 in the top left corner of the Search Results pane to navigate through your recent searches and update the contents of the Search Results pane Ch After viewing previous searches click the Next Search button navigate back to your current search in the top left corner of the Search Results pane to Using advanced search options If your media library contains many files and you re searching for a very specific media file the Advanced section of the Search pane can help you zero in on exactly the file you want If you want to perform an advanced search to refine the results of a previous sear
182. ardware Before you create surround projects you should set up your system to provide 5 1 surround playback To play a 5 1 surround project you must have an appropriate speaker setup such as e Six powered speakers e Six passive speakers with a six channel amplifier Your system must also have an appropriate sound card setup such as e 5 1 compatible sound card e Sound card with three stereo outputs e Three stereo sound cards There are several ways to set up your system depending on the sound card and speaker setup you are using Six powered speakers Six passive speakers with a six channel amplifier 5 1 Connect powered speakers to your sound card s Connect your sound card s front rear and center compatible outputs as indicated by your sound card s subwoofer outputs to the appropriate inputs ona sound card documentation six channel amplifier home theater receiver Connect front rear center and LFE speakers to the amplifier Sound card Connect powered speakers to your sound card s Connect your sound card s outputs to the appropriate with three outputs where you have routed each of the pairs of inputs on a six channel amplifier home theater receiver stereo channels The left channel of the Center LFE pair is Connect front rear center and LFE speakers to the outputs the center channel the right channel is the LFE amplifier channel Three stereo Connect powered speakers to your sound cards Connect your sound card s outputs
183. are controller you can use MIDI merge recording to record the envelopes For more information see Using MIDI merge recording on page 166 5 Drag a slider to edit automation settings at the cursor position The track header controls behave differently depending on the track s automation recording mode e When the track automation mode is set to Off the controls adjust the level of the entire track In this mode the automation envelope is bypassed and the control does nothing e When the track has a controller envelope and the track automation mode is set to Read the control will follow the envelope during playback but cannot be adjusted e When the track automation mode is set to Touch or Latch the control edits the envelope setting at the cursor position If the track does not have an envelope an envelope will be added when you adjust the control If multiple tracks are selected all selected tracks are adjusted For more information see Recording automation settings on page 137 Configuring MIDI track controller automation You can use the Output Settings tab in the MIDI Track Properties dialog to configure which controllers can be automated add remove or hide envelopes set default values and set each envelope s default fade curve For more information see Configuring MIDI track output settings on page 176 Resetting a MIDI controller envelope s points Perform either of the following actions to reset an envelope s points
184. are removed from the selected track s and placed on the clipboard Existing events in the selected track s move forward to occupy the space created by the cut Cutting time selections in ripple editing mode Events within the time selection are reproduced and placed on the clipboard Also the time information is placed on the clipboard Existing events occurring after the time selection move forward in the project by the length of the time selection Events before cut Clipboard contents Events after cut Existing events adjust to occur sooner in the project EDITING EVENTS 67 68 Chapter 3 Cutting time and event selections in ripple editing mode Events and portions of events within the time selection are reproduced and placed on the clipboard Also the time information is placed on the clipboard Existing events occurring later than the time selection move forward by the length of the time selection Only tracks containing selected events are affected by the ripple edit Events before cut Clipboard contents Events after cut Existing events on the top track adjust to occur sooner in the project E Deleting events in ripple editing mode Deleting events or portions of events removes them and their time information from their respective tracks However this information is not placed on the clipboard Existing events move forward when you delete material from a selected track 1 From the Options menu choose Ripple Edits
185. are sonypictures com support default asp To listen to your support options by telephone please call 608 256 5555 About your rights in ACID software ACID is licensed to you under the terms of the End User License Agreement The End User License Agreement is first presented to you when you install the software Please review the End User License Agreement carefully as its terms affect your rights with respect to the software For your reference a copy of the End User License Agreement for ACID is located at http www sony com mediasoftware About your privacy Sony Media Software respects your privacy and is committed to protecting personal information Your use of the software is governed by the Software Privacy Policy A copy of this policy is incorporated into the registration process and you are asked to agree to its terms prior to accepting the terms of the End User License Agreement Please review its contents carefully as its terms and conditions affect your rights with respect to the information that is collected by the software For your reference a copy of the Software Privacy Policy is located at http mediasoftware sonypictures com corporate privacy asp Proper use of software ACID is not intended and should not be used for illegal or infringing purposes such as the illegal copying or sharing of copyrighted materials Using ACID for such purposes is among other things against United States and international copyright law
186. arrow and choose Delete Envelope to remove the envelope all envelope points from the timeline Click the Remove all Envelopes button at the bottom of the dialog to delete all controller envelopes on the track 4 Double click the Def box and type a new value to change the default setting for a controller This value is used when you reset envelope points 5 Clickthe down arrow inthe Curve Type box to set the default fade curve for each controller s automation envelope The new curve type will be applied to all segments on the envelope You can right click a segment and choose a new fade curve to override the default curve type 6 Click the Save button if you want to save the current settings as a mapping file or click Load to browse to a mapping file that will replace the current settings Note You can also select controllers by doing either of the following e Double click the MIDI track icon to open Track Properties dialog On the Output Setting tab choose Controllers from the drop down menu e Click the Program button choose Select Program Change Tip You can MIDI merge recording to record MIDI controller values from a MIDI device For more information see Using MIDI merge recording on page 166 Setting the track voice You can set the voice used to play the entire track or you can add keyframes to add program changes 1 Right click the track header choose Insert Remove Envelopes and then choose Configure C
187. aste them to a new location z 8 Activates the Erase tool to erase events or parts of events When used in conjunction with the Ctrl key the Erase tool can erase an entire one shot MIDI track or Beatmapped track event with one click Creates a copy of the selected items from the track view on the ACID clipboard You can then paste them to a new location INTRODUCING ACID SOFTWARE 17 18 Chapter 1 Inserts the contents of the ACID clipboard at the current cursor position The pasted items cover any existing events To make room for pasted events choose Paste Insert from the Edit menu tal Reverses the last action performed ACID supports unlimited undos allowing you to restore the project to any state since the last save Reverses an undo Turns the snapping feature on or off With snapping enabled you can decide whether to snap to the grid or to all elements markers regions etc amp jy Allows you to automatically create crossfades when you overlap two audio events Activates the Envelope tool to select and modify envelope points Activates the Time Selection tool to quickly select all events within range of time Activates the Groove tool to apply a groove to a track You can use grooves to manipulate the timing of tracks by quantizing media to predefined grooves or by applying the feel of one track to another Activates the Groove Erase tool to erase grooves or parts of grooves When used
188. at count of 16 You can also drag a column heading from the Search Results pane to the Advanced section of the Search pane 2 Set parameters for each of your search criteria If the item displays an edit box type the parameter you want to search for If the item is displayed as a hyperlink click the value to display a control you can use to set the value 3 Choose whether you want to display files that match any or all of your search criteria e Choose Match Any from the Match Any Match All drop down list if you want to display all media that matches any of your keyword tag or advanced search criteria e Choose Match All from the Match Any Match All drop down list if you want to display only media that matches all of your search criteria 4 Select the check boxes for the advanced search criteria you want to include in your search or clear a check box to exclude that item USING THE MEDIA MANAGER 83 84 Chapter 4 Previewing media You can use the transport controls in the Media Manager window to preview media files 1 Select files in the Search Results pane to choose the files you want to preview e To select a single file click the file or To select multiple consecutive files click the first file hold the Shift key and then click the last item or e To select multiple files that are not consecutive hold the Ctrl key and click each file 2 Start playback e If the Auto Preview button E is selected playb
189. at is used during playback The larger the number the more buffering that occurs during playback This value should be as low as possible without gapping To set it start at 25 and play a typical song Move some of the track faders If the playback gaps at all try increasing this slider in small increments until the gapping stops As you increase this slider the RAM meter at the bottom of the ACID window will indicate more RAM usage If you simply cannot get playback to be free of gapping you need to either decrease the number of tracks you are trying to play simultaneously install more RAM in your computer so you can increase buffering buy a faster access hard drive or minimize the number of audio plug ins you are trying to use simultaneously Select this check box and drag the Track buffering slider if you want to adjust the amount of audio that is prerendered ahead of the cursor position When the check box is selected a separate processing thread is used to render audio from tracks On multiprocessor or multicore computers a thread will be created for each logical processor When the check box is cleared a single processing thread is used to render audio from tracks and busses Choose the device that you want to use for recording sound data Selecting the Microsoft Sound Mapper allows the operating system to select an appropriate device to use for the current sound data Select the check box to automatically compensate for off
190. at the cursor position Cursor position A and split point Splitting multiple events Selecting multiple events splits only the selected events at the cursor s position Be sure to set your cursor position before selecting events Attempting to set your cursor after selecting events causes you to lose your event selection Events before Events before splitting Events after splitting o Events after splitting Only the selected Events to events split at the be split cursor position Cursor position and split point Splitting a time selection Making a time selection allows you to split events at the time selection s in and out points across all tracks Events before splitting Events after splitting Loop bar Loop bar In point A Out point Split point Split point EDITING EVENTS 65 66 Chapter 3 Splitting events within a time selection When selecting events within a time selection only the selected events in the time range split at the in and out points Events before splitting Events after splitting Selection bar Selection bar Only the selected event splits at the in and out points Event to split at the time selection s in and out points In point Out point Split point A split point Joining events You may join events on ACID tracks that have been segmented along the timeline Joining events is an efficient way to redraw an event and remov
191. ate one shot track in the track view If your project already contains a video track you are prompted to replace the existing video if you open another video file Tip You can also add a still image such as a BMP JPEG PSD GIF PNG or TGA file to the video track Removing the video track Right click anywhere in the video track and choose Remove Video from the shortcut menu Hiding and showing the video track By default video displays in the track view when you add it to a project You can hide or show the video track at any time by choosing Show Video Track from the View menu A check mark next to the command indicates that the video track displays Synchronizing audio and video Editing the audio associated with a video file can cause it to become out of sync with the video To resynchronize the audio and video right click the audio file and choose Synchronize with Video from the shortcut menu Note This does not work if you have changed the audio track to a loop Removing the video s audio Right click the audio track in the track list and choose Delete Track from the shortcut menu The audio track is removed but the video remains Changing frame numbering Each frame is numbered in the video track You can change the numbering format or turn off frame numbering altogether 1 From the Options menu choose Preferences The Preferences dialog appears 2 Click the Video tab 3 Choose a setting from the Show source frame n
192. ate When you register your copy of the software Sony generates an activation code for you based on the Computer ID number Once you enter the activation code the ACID application will not time out Since the activation number is based on the Computer ID it is important that you have the software installed on the computer where you will be using it A method of compressing audio data Although the theory for compression using ADPCM is standard there are many different algorithms employed For example Microsoft s ADPCM algorithm is not compatible with the International Multimedia Association s IMA approved ADPCM See Windows Media Format A type of distortion that occurs when digitally recording high frequencies with a low sample rate For example in a motion picture when a car s wheels appear to slowly spin backward while the car is quickly moving forward you are seeing the effects of aliasing Similarly when you try to record a frequency greater than one half of the sampling rate the Nyquist Frequency instead of hearing a high pitch you may hear a low frequency rumble To prevent aliasing an anti aliasing filter is used to remove high frequencies before recording Once the sound has been recorded aliasing distortion is impossible to remove without also removing other frequencies from the sound This same anti aliasing filter must be applied when resampling to a lower sample rate ASIO Audio Stream In Out is a low latenc
193. ates cleanly between processing the effect and bypassing the effect You can repeat the pattern by copying and pasting the envelope points repeatedly For more information see Cutting copying and pasting envelope points on page 134 Making automated frequency changes more natural When you automate an effect s frequency parameters such as the frequency parameters in the track EQ effect you may notice that the frequency changes are more apparent moving through the lower frequencies than the higher frequencies Without getting too technical frequency scales in track EQ and other plug ins use a logarithmic scale instead of a linear scale Since effect automation uses linear interpolation an effect s automated frequency parameter will sound as if it sweeps through the lower frequencies faster than the high frequencies You can visualize this if you watch the plug in settings in the Audio Plug In window during automated effect playback To make automated frequency changes sound more natural use envelope fade curves to change the rate at which interpolation happens between two envelope points For a high to low frequency sweep use a fast fade curve between points and for a low to high frequency sweep use a slow curve Although the fast and slow curves are not logarithmic curves they are similar enough to make the frequency transitions sound more even For more information see Changing envelope fade curves on page 134 Overriding compress ex
194. ation recording mode For more information see Automating 5 1 surround projects on page 136 Volume or pan automation You can change a track s volume or position in the stereo field throughout a project using automation envelopes Adding volume or pan envelopes 1 Select the track to which you want to add the envelope You may select multiple tracks 2 Add the envelope to the selected track s in one of following ways e From the Insert menu choose Envelopes and choose Volume or Pan from the submenu e Right click the track header in the track list choose Insert Remove Envelope from the shortcut menu and choose Volume or Pan from the submenu e Press Shift V volume envelope or Shift P pan envelope A blue line appears across the track s for a volume envelope and a red line appears across the track s for a pan envelope Envelope line Note Because the default panning mode is additive you can introduce clipping when panning a track to the left or right Choose an appropriate pan type and adjust the track volume accordingly For more information see Choosing stereo pan types on page 113 Adjusting volume or pan automation settings 1 If you want to change volume or pan settings by recording automation select the Automation Settings button x The fader slider handle is displayed as a in automation mode 2 Drag the Vol fader to control how loud a track is in the mix or drag the Pan slider to control the po
195. ation see Creating or editing program maps on page 198 5 If you want to change the description of the map edit the text in the Drum Map Description box Add keys as needed a Click the Insert Key button sh to add a key to the drum map If a key is selected the next available key will be inserted For example if you select C5 and click Insert Key C 5 will be added if it does not exist in the current drum map If C 5 D5 and D 5 already exist E5 will be added b Double click the name in the Instrument column and type the name of the instrument associated with the selected key 7 Select a key in the table on the right side of the dialog and click the Delete Key button x to remove it from the drum map 8 If you want to copy key assignments from other drum maps perform the following steps a Inthe MIDI Drum Map Template list select the drum map that contains the keys you want to copy b Select the keys you want to copy Hold Ctrl or Shift to select multiple keys c Click the Copy Selected Keys button GL d Inthe MIDI Drum Map Template list select the drum map that you want to edit e Click the Paste Copied Keys into Map button Select the keys you want to copy Hold Ctrl or Shift to select multiple keys If a key is selected the next available key will be inserted For example if you select C5 and click Insert Key C 5 will be added if it does not exist in the current drum map If C 5 D5 and D 5 already exist E5 wi
196. ation see Routing tracks to busses on page 141 3 Double click the surround panner on the mixer control to display the Surround Panner window Mixer Surround Panner EJ 44 100 Hz 16 Bit wo S GL age Insert FX QP Insert Bus 9 Insert Soft Synth Double click to display the Surround Panner window A Bus 4 Trim bi 6 0 6 0 6 0 ii Pipe Organ EO N EE ee eke TTT TE enanaecnananGananafaata danaseaman mam ane 4 Adjust the panning settings For more information see Using the Surround Panner window on page 214 5 Close the Surround Panner window Tip You can also use the surround panner on the mixer control to pan your track Using the Surround Panner window Whether you re adjusting track panning or mixer control panning you use the same controls in the Surround Panner window View the Surround Panner window by double clicking a surround panner on a track header or mixer control Once the Surround Panner window is open you can dock it in the ACID workspace For more information see Docking and floating ACID windows on page 221 Tip You can also choose Surround Panner from the View menu to display the Surround Panner window Once the Surround Panner window is displayed double click the surround panner for a track or mixer control to view its pan settings Toggle options for constraining pan point movement Surround Panner Electric Guitar
197. automation you can dynamically adjust effect parameters over time Adding effect automation envelopes If a plug in supports automation you can use envelopes to adjust effect parameters over time The appearance of the plug in in the Plug In Chooser window indicates whether the plug in supports automation Plug ins with this icon pf support automation while plug ins with this icon fy do not In addition you can quickly locate plug ins that support automation in the Automatable subfolder For creative ways to use effect automation envelopes see Creating wah wah effects with automated Track EQ on page 264 and Turning automated effects on and off on page 265 1 Click the Track FX button 8 on a track to open the Audio Plug In window If no track effects exist clicking the Track FX button displays the Plug In Chooser Use the Plug In Chooser to create an effect chain including an automatable plug in For more information see Creating or adding to track plug in chains on page 111 Click the Configure FX Automation button 1 to display the FX Automation Chooser 3 Clicka plug in at the top of the FX Automation Chooser A list of the effect s automatable parameters appears Select the check box for each parameter that you want to control with an envelope You can use the Select All and Select None buttons to quickly change your selections to all or none of the parameters FX Automation Chooser Galileo Track EQ H Resonant Filte
198. available when this check box is selected Default All Restores all MIDI preferences to the default settings APPENDIX A 233 234 APPENDIX A Using the VST Effects tab Item Default VST search folder Alternate VST search folder X Select VST effects to be available as audio plug ins Using the VST Instruments tab Item Default VSTi search folder Alternate VSTi search folder X Select VST instruments to be available as soft synths Using the ReWire Devices tab Item Select ReWire devices to be available as soft synths Using the Video tab Item Device Details If project format is invalid for DV output conform to the following Sync offset frames Record engage delay frames Default All Using the Editing tab Item Project tempo range Description Displays the location where the software looks for VST effects Click Browse to choose an alternate location where VST effects can be found Select the VST effects that you want available for use as ACID audio plug ins Only the VST effects located in the default or alternate search folders appear in this box Description Displays the location where the software looks for VST instrument files Click Browse to choose an alternate location where VST instrument files can be found Select the VST plug ins that you want available for use as ACID soft synths Only the VST instruments located in the default or alternate search folders appear in th
199. b effects e Configuring larger offsets creates interesting echoes 1 Right click a track and choose Duplicate Track from the shortcut menu A copy of the track is added to the track list 2 Hold Alt while dragging the waveform of the duplicate track Notice that the waveform moves within the event which retains its size and position on the timeline 3 Experiment with different offsets between the duplicate tracks Tip As with most tricks this method can be combined with pan and volume envelopes to produce an unlimited range of effects Creating ping pong pan effects You can use a pair of tracks to ping pong audio from one speaker to another 1 Right click a track and choose Duplicate Track from the shortcut menu A copy of the track is added to the track list 2 Use the multipurpose slider to pan the original track 100 right and the duplicate track 100 left 3 Use the Erase tool E to erase every other beat alternating between the original and duplicate track Tip You can also use a pan envelope on a single track to create the same effect For more information see Using track envelopes on page 122 Adding depth with assignable effects You can add depth to your mix by panning a dry signal no effects to one side and a wet signal with effects such as chorus or reverb to the other You can pan the dry and wet signals by adding an assignable effects chain to your project 1 Add an assignable effects chain containing an eff
200. beat or pattern Loops are usually one to four measures long and are stored completely in RAM for playback A marker is an anchored accessible reference point in a file An informational pathway over which MIDI data can travel A standard way for Windows programs to communicate with multimedia devices such as sound cards and CD players If a device has an MCI device driver it can easily be controlled by most multimedia Windows software Files that may be placed within the ACID project After a media file is placed into the project it is referred to as an event A MIDI device specific timing reference MIDI Clock is not absolute time like MIDI timecode MTC instead it is a tempo dependent number of ticks per quarter note MIDI clock is convenient for synchronizing devices that need to perform tempo changes mid song MIDI clock out is supported but MIDI clock in is not A MIDI port is the physical MIDI connection on a piece of MIDI hardware This port can be a MIDI in out or through Your computer must have a MIDI capable card to output MIDI timecode to an external device or to receive MIDI timecode from an external device MTC is an addendum to the MIDI 1 0 specification and provides a way to specify absolute time for synchronizing MIDI capable applications MTC is essentially a MIDI representation of SMPTE timecode Multiple bit rate encoding also known as Intelligent Streaming for the Windows Media platform and SureStream for the
201. ble click in the track s keyframe row to add a keyframe Bonaflipis Luppus 3 To edit a keyframe double click it to display the System Exclusive Editor dialog Tip To hide the Sysex keyframe row without removing keyframes right click the track header choose Insert Remove Envelope and then choose Hide Sysex from the submenu You can view the keyframe row again by right clicking the track header choosing Insert Remove Envelope and then choosing Show Sysex Automating VSTi parameters You can use the soft synth bus track to control parameter automation for VST instruments For more information see Using soft synth controls on page 144 Adding parameter automation envelopes 1 Select the bus track header for a VSTi soft synth 2 From the Insert menu choose Envelopes and then choose Soft Synth Automation from the submenu The Soft Synth Parameter Automation dialog is displayed 3 Select the check box for each parameter you want to automate with an envelope Click the down arrow inthe Envelope box and choose a command from the menu Item Description Insert Envelope If the parameter does not have an automation envelope No is displayed Click the down arrow and choose Insert Envelope to add an automation envelope to the timeline Show Hide If the parameter has an automation envelope Visible or Hidden is displayed Envelope Click the down arrow and choose Hide Envelope or Show Envelope to toggle its display
202. board items into tracks For more information see Pasting events on page 61 The following procedures explain pasting information in ripple editing mode Note Events are always pasted into their own tracks at the cursor position From the Options menu choose Ripple Edits to enter ripple editing mode Move the cursor to the desired timeline location Place the cursor within the track where you want to paste the event 2 Click the Paste button on the toolbar to paste the event into the track Clipboard information is pasted at the cursor s position on the track Existing events or portions of events after the cursor adjust to occur later in the project The amount of adjustment is based on the total length of the information being pasted Pasting single track information in ripple editing mode The information on the clipboard determines how many tracks are affected when you paste If you have copied or cut information from one track only the selected track is affected by the pasted event and time information Clipboard contents Events before paste Events after paste a 5 1000 ate Ee 41000 _ Existing event adjusts to move later in the project Paste Newly pasted position event Pasting multitrack information in ripple editing mode Multiple events can be pasted as easily as single events Clipboard contents Events before paste Events after paste wehtedee bt does aoe Newly pated event Th
203. box to force the end note off messages of MIDI events to a specified resolution on the grid Preserve duration If you select Quantize start or Quantize release you can select this check box to maintain the lengths of notes Quantize grid Click an icon to select the resolution of the quantize grid WORKING WITH MIDI 173 Tuplet Select this check box to set irregular beat boundaries for the quantize grid For example to quantize to triplet beat boundaries in 4 4 time select the Tuplet check box and choose 3 in time of 4 Offset by Select the check box and type a value in the box to offset the quantize grid by the specified number of ticks You can type negative values to shift the grid backward Swing Drag the slider to add a swing to the quantize grid When you set this slider to 0 notes are quantized directly to the grid Increasing the setting shifts every other grid boundary forward set to 300 to shift every other grid boundary to the next grid division Strength Drag the slider to adjust how strictly you want to quantize For example to quantize directly to the grid set the slider to 100 If you set the slider to 50 a note that would be shifted 4 ticks is moved only 20 ticks 4 Select the tracks or events you want to quantize e Select a track to quantize all events on the track Hold Ctrl or Shift while clicking a track header to select multiple tracks e Ifyou want to quantize multiple events on multiple tracks hold Ct
204. c ccc ce eee cence eee eeeeeeees 176 Configuring MIDI track output SETTINGS 0 ccc ccc eect eee eee e eee eeeneees 176 Configuring MIDI input filters 0 cece cece eee e nee e teen ee eeeees 179 Setting up MIDI quantize input filters 2 0 0 ccc ccc cee eee e teen teens 181 USING ENG CIID POON ax ceincsnena deco besten seeeoendesnoniees use sista E EE EREET 182 Toggling looped or one shot painting for a MIDI clip 0 ccc cece eee eeeees 182 Editing a MIDI clip s time Signature 2 0 cc ccc ccc cece cece teen eee eee nee eeeeees 182 MIDI Track Envelopes and Keyframes cece ccc eee ene e ene eeeeeeneenes 183 Adding a MUTE envelope 5 occas cdwaneweane ange desieww sees sawsaw sede Ueww diese Venwwae sews 183 Adding a MIDI controller envelope cc ccc ccc ence ence eee e nese teen ee eeeeeees 183 Configuring MIDI track controller automation cece ccc cence ene e en neneee 184 Adding a program change keyframe cece cece cee nee e nen ee eset eeennnes 184 Add a Sysex keyframe iecessi 556 4 nour dae oho meres aks Reward noses esndee bnesa ees eereeinesoes 185 Automating VSTi parameters cee ccc cece ccc eee eee e eee e eect eee e eee eeeeeeeeees 185 Editing MIDI clip properties 0 0 cc ccc ccc ccc cc cee cece eee eeeeeeeeees 186 Editing a MIDI clip with OPT Piano Roll ccc ccc ccc ccc cee nent eeennees 186 Editing a MIDI clip with OPT Piano Roll ccc ccc ccc ccc ccc
205. c cence teen ene e eee eee eee eeennnees 129 Adding or removing track effect automation ccc cece teen en neeeeenees 130 MIDI Controller automato ssrirsrinir errs caarindud aad eetawosaedtvawsegedanceeresanedleciaacin 131 MIDI program change automation cece cece cece eee eee eeeeeees 132 Working with track envelopes cece eect e eee e eee e eee e eee eeeeeaaes 132 Adjusting Envelopes o5 05000000ec4eeenwetdsanetonnieevase toner cenvesdenwewnawediuwasaewwds 132 Using the Envelope tool 2 0 cece eee eee eee e eee e enna eeeeeees 134 Aiding ThaCK CNVEIODES gs bvic actu acte oue Geac cewe cudinnssaeidd ideal seudddadiowsiaceiwt Cedwanwes 135 Removing track envelopes cece cece cence eee e ee eee tenet eeeeeees 135 Automating 5 1 surround projects 22 cow scsceed ec ceek sored voce dweeeseereswtaveweweeen 136 Automation recording MOdES 0 cece cece eee eee e eee e Er ENARE 136 Recording automation SettingS ccc ccc ccc ccc cece cette eee eee teeeeennees 137 Editing sections of your recorded settings in Touch MOdE cece eee e eee e ee nnes 137 Overwriting recorded settings in Latch mode cece cece e teen eee e eee eeeeenes 138 Editing individual envelope points or keyframes ccc ccc eee cece eee n eee eee e eens 138 Setting the automation recording mode for a track ccc cece ccc ee eee e eens 138 SINC Ne MO een errie E seep shed eed tases ede amamatuedwnon
206. cal beats on the ruler at the top of the waveform display Beat markers P correspond to points in time on the ruler at the bottom of the waveform display Each beat marker corresponds to a combination beat stretch marker on the timeline If you want to convert a combination beat stretch marker to a stretch only marker double click the marker or right click the marker and choose Convert to Stretch Marker from the shortcut menu Beat anchors and markers are used only when a groove is applied to a track Offsets between beat anchors and beat markers indicate that the beat represented by an anchor is actually played at the marker position which may occur before or after the beat This mapping represents the difference required to remove an existing groove from a media file and return the media to straight machine time so that grooves can be applied accurately If you want to hear the results of editing beat anchors and markers select the Play Quantized button W at the bottom of the Clip Properties window and use the Clip Properties transport controls to preview the loop Playing the clip in Play Quantized mode demonstrates how the clip sounds when the Quantize to Straight groove is applied In most cases you won t need to edit beat anchors Tip Use the Zoom In Time and Zoom Out Time _ buttons to change the magnification of the waveform Important Grooves are not applied using the markers on the Stretch tab Autodetected stre
207. cales Though it is well outside the intended scope of the application you can build unique scales from audio loops To do this you must first isolate a note and determine what pitch it is You can easily do this using the Spectrum Analysis tool in Sound Forge Once you isolate and identify the note choose Save As from the File menu in Sound Forge to save the note as anew WAV file with a unique name Finally add the file to the ACID project and use pitch shifting to create all remaining notes in the scale APPENDIX C 267 268 APPENDIX C Appendix D Glossary acd zip Activation Code Adaptive Delta Pulse Code Modulation ADPCM Advanced Streaming Format ASF Aliasing ASIO ASX File Attack Attenuation Audio Compression Manager ACM Audio Interchange File Format AIFF Audio Proxy File sfap0 Bandwidth Beatmapped track The glossary contains terms and their definitions that you may come across in the manual This glossary not only includes terms associated with ACID software but also includes relevant industry terms An ACID project file that contains all information regarding the project including track layout envelope settings and effects parameters In addition all audio files used in the project are embedded into the project file This number is based on the Computer ID number of the computer on which the software is installed Each computer has a unique number similar to a license pl
208. cation of the Chopper e Click the Zoom In Time and Zoom Out Time buttons located in the lower right corner of the window e Click within the Chopper and use the mouse wheel e Quickly magnify a selection by right clicking and choosing Zoom to Loop Region from the shortcut menu Previewing in the Chopper The Chopper contains a dedicated transport bar that can be used to preview selections prior to inserting them into the project USING THE CHOPPER 101 102 Chapter 6 Using Chopper toolbar and keyboard commands In addition to the transport bar the Chopper contains a toolbar that is designed to make creating selections quick and easy The following table briefly describes the toolbar buttons and the associated keyboard commands Button Etl Insert Keyboard front slash or A Ctrl comma Ctrl period semicolon apostrophe lt or comma gt or period Ctrl Shift comma Ctrl Shift period Ctrl semicolon Ctrl apostrophe R M O Function Inserts the Chopper selection in the track view at the current cursor position Shifts the track view s cursor position to the left by the length of the increment arrow Shifts the track view s cursor position to the right by the length of the increment arrow Links the length of the increment arrow with the length of the selection When toggled on the length of the increment rema
209. ce eee eee eee eeeeeeeeeeneee 91 WOnKING WIE TEJIONS stung chide rn NENEFU NNR onaiha hee ehueiw hate e ake WON wil ees 93 SSI GHA DING EEEIEE IEEE P E aaa eae cene chee neues E EE 94 Choosing SNAPPING OPTIONS cece eee eee e eee e eee e eee e eee eeeeeeaeeeees 95 Changing tempo time signature and key cece cece ccc eee eee e eee e eee eeeeees 95 Changing project tempo uc cneeoctrcansneoutuutec dere one oene cane Ree sear eeeurear eons 96 Changing project time signature cece eee eee eee e nese eee e eee eeeeeeeeenees 96 Changing Project Key sviue ane ceavsd nerd Cineni SEEL EEEE Perea wince EESE 96 Working with tempo key time signature change Markers cece eee cece e eee nees 97 Changga cD okoy sorrise E AERE AA A EAA 98 Changing an event s key sase lt dveawetausdarenvedeecid eeweleeeedvemestaeeemoryeleereaseuteas 98 AUNO Ern E E E EE EAS 99 MEUN IE earen etA eNEAN EEE E AEEA AEA AEEA AAEE AAAA AAA 99 PG CONE Eee E EE E E E E EA E E AEE AAN S 99 WSINnG ING CHOPE 2 shacntamen aaiaseocwamancdine Geieeea ee eee aenwesaeteseneeunaaes 101 Working in the Chopper Window ccee cece eee e eee e eee e eee e eee eeeeeaeeees 101 Viewing the Chopper cc cece cece eee eee ee eee eee eee eee eee eee eee NARAR 101 Changing the Chopper grid avin vccesoawtawedien saw sencena sau ade etensaweotnseeewsewsdeues 101 Changing Chopper snapping Options cece cece cece cece eee e eee e seen ee eeeeees
210. ces Jeg YST Effects YST Instruments ReWire Devices Video Editing Sync Display Other Folders External Control amp Automation General Audio Audio Device MIDI Make these devices available for MIDI track playback Hardware Port Device MIDI Thru From SB Audigy Mackie Control v2 10 Reserved by Device AudioFireS Mackie Control Exte Reserved by Device Make these devices available for MIDI input Hardware Port Device MIDI Thru To SB Audigy Mackie Control v2 10 Reserved by Device AudioFire8 Mackie Control Exte Reserved by Device lt gt Auto MIDI input routing b In the Make these devices available for MIDI track playback box select the check box for the MIDI port that is connected to the Mackie Control Universal s In port c Inthe Make these devices available for MIDI input box select the check box for the MIDI port that is connected to your Mackie Control Universal s Out port d Repeat Steps 2b and 2c for each Mackie Control Extender e Click Apply Note MIDI ports that are in use by a Mackie Control or Extender display a amp icon to indicate that they are not available for MIDI track input or playback 3 Choose your control surface a Select the External Control and Automation tab in the Preferences dialog b From the Available devices drop down list choose Mackie Control and click the Add button to load the default profile 4 Click OK to apply your changes and c
211. cessary If you selected the DLS soft synth you can click the Open DLS Voice Set button E to choose a DLS voice set If you selected a ReWire 2 0 device the Soft Synth Properties window displays information about the synth s MIDI ports Click the Open ReWire Device button E to start the device some applications cannot be started by a ReWire mixer or select the Lock MIDI Port Configuration button m to lock MIDI ports so the software does not lose port assignments due to dynamic changes from ReWire devices Changing voice mapping for DLS soft synth controls You can choose a DLS set from anywhere on your system for output from a DLS soft synth control 1 Double click the soft synth icon on a control 2 The Soft Synth Properties window appears 2 Choose a DLS set from the Voice set drop down list or click the Open DLS Voice Set button 1E to browse to a DLS set Note To set the current voice set as the default setting to be used whenever you add a DLS soft synth click the Set as default DLS Voice Set button amp If the default voice set is unavailable the Windows GS sound set will be used Changing patches for DLS soft synth controls The DLS soft synth Available voices pane displays the patch names numbers and other parameters of the voices included in the DLS set You can choose a patch to play until the software receives a patch change from the MIDI file 1 Select a channel from the Channel drop down list 2 Sele
212. ch start by creating a quick search or tag based search and then perform the following steps Tips You can use the Search Results Limit box in the Media Manager Options dialog to determine the maximum number of media files you d like to have returned in the results of your searches Increasing the Search Results Limit setting increases the amount of time required to search a library and can significantly decrease performance if set excessively high When performing complex searches consider creating temporary tags to classify the results If you apply a tag to the files found by a complex search you can return to those files easily by searching on the tag The Media Manager tool can search for tags more quickly than it can perform keyword or advanced searches 1 Add your search criteria a Click the Add New Search Criteria button _ in the Search pane The Search Criteria Chooser is displayed b Double click an item in the Search Criteria Chooser or drag it to the Advanced section of the Search pane Search Resuks OO ruat Clear Bit Depth 24 ACID Type Beat Count Tempo 267 Loop 16 115 000 C 268 Loop 16 115 000 4 269 Loop j g 115 000 D 270 Loop 8 115 002 E SFI ann 14G 115 000 Ty Tips f an item in the Search Results pane displays a gt button you can click it to find related media For example clicking the button in the following example adds an item to the Advanced section to help you find other media with a be
213. crosoft DirectX programming interface Portions utilize Microsoft DirectX technologies Copyright 1999 2006 Microsoft Corporation All rights reserved Microsoft Windows Media 9 Portions utilize Microsoft Windows Media technologies Copyright 1999 2006 Microsoft Corporation All rights reserved Real RealMedia RealAudio and RealVideo applications 2006 RealNetworks Inc Patents Pending All rights reserved Real Real Media RealAudio RealVideo and the Real logo are trademarks or registered trademarks of RealNetworks Inc in the United States and other countries MPEGLA and MPEG 2 USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG 2 STANDARD IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG 2 PATENT PORTFOLIO WHICH LICENSE IS AVAILABLE FROM MPEG LA LLC 250 STEELE STREET SUITE 300 DENVER COLORADO 80206 Manufactured under license from MPEG LA Dolby Dolby Digital AC 3 and AAC encoding This product contains one or more programs protected under international and U S copyright laws as unpublished works They are confidential and proprietary to Dolby Laboratories Their reproduction or disclosure in whole or in part or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited Copyright 1992 2006 Dolby Laboratories All rights reserved Dolby the double D symbol AC 3 and Dolby Digital are registered trad
214. ct DUODS serrer tr ttire EErEE E EAE EE EEE EA EEEE 253 Hee PUNON serena renra EA E N ETS 253 Transport DUONS axca0cccxeceeneusaewnesusegadentnctesceusewnsp EEEE pE RTENE EDERN 254 AMOWDUNONS crerarres steed ted eee E A EEEE N A ATAA AEE AA 255 JOA er e A E E E E E d ae eee 256 Using a Frontier IranzPOr o icc ecien acne idari cued ouewe EE EEEE A 256 Viewing the control MAPPINGS ccc cc ccc ccc eee eee eee eee e eee e eee eeeeeeeeees 256 Adjusting track or DUS volume cece ccc ccc eee e een e eee eee eeeeennees 257 Adjusting track or DUS panning ccc ccc cece eee eee e eee eeeeeeeeeeeeeeees 257 Editing a track s input device 2 ccc ccc ne nee nee e eee e ene ee eeeeees 257 Editing a track or mixer Control s output device 2 6 ccc ccc ccc eee ee cence 258 Configuring a generic MIDI controller 0 0 cece ccc cee eee eee e eee eeeees 258 Customizing your control MAPPINGS cee cece cece nent nent eee eee e ee eeeneees 258 Loading a control Mapping file 0 cece ccc cee eect eee e ene e eee teeeees 259 Example of how you can set up MIDI keyboard as a generic control surface 259 ACID Tips ana TACKS ecenin taninai ra EEE Eiei 261 Adding long media files QUICKlY 0 cece cece eee ect eee n eee eee e eee teens 261 Playing with duplicate tracks ccc cece Ene EENEN EEEE EPERE EE 261 DeEtUNING paired TACKS i405 555 405 hss oe oe bd ewes TIREE NETI AETERNE IETS uese wse
215. ct a patch in the Available voices pane The Program button ff Ice Galaxy in the track header will display the selected patch for all tracks routed to the channel you selected in step 1 If the track does not contain program change keyframes the selected patch is used to play the entire track If the track contains keyframes the selected patch is assigned to the keyframe that occurs before the current cursor position Tip You can create patch change events in the list editor in order to change patches within MIDI files For more information see Creating events on page 195 Adding patch changes to a MIDI file You can add program change keyframes to tracks to change patches throughout the duration of your project For more information see Adding a program change keyframe on page 184 You can also create patch events in the list editor to change patches and banks within MIDI files For more information see Creating events on page 195 USING THE MIXER 145 146 Chapter 9 Previewing a DLS soft synth in the Soft Synth Properties window When your re using a DLS soft synth a keyboard is displayed at the bottom of the Soft Synth Properties dialog so you can play the synth with your mouse and audition patches To display the Soft Synth Properties dialog double click the soft synth icon ona control 2 Soft Synth Properties Ea i DLS Soft Synth g H Edit Soft Synth voice set fas sound set 16 bit E Ex Channel E
216. cts chain or they can adjust volume automation settings For more information see Track automation on page 127 Adjusting track volume You can adjust track volume using the Vol fader in the track header the same way you do in stereo projects Deselect the Automation Settings button if you want to adjust trim levels W Electric Guta O ofe k O Vol 12 0 dB il G Electric Gu Track header in trim mode Select the Automation Settings button if you want to adjust volume automation The fader handle is displayed as a J in automation mode D Electric Suita e 7 xx i Vol 6 0dB G electricau Track header in automation mode Adjusting assignable effects send or bus send levels You can adjust send levels for busses or assignable effects chains using the multipurpose fader in the track header Click the fader label and choose an assignable effects chain or bus from the menu The fader in the track header can function as a trim control that adjusts the overall send level of the track or it can adjust send level automation settings Deselect the Automation Settings button if you want to adjust trim levels Select the Automation Settings button if you want to adjust volume automation The fader handle is displayed as a J in automation mode Adjusting channel levels Use the Surround Master bus control in the Mixer window to adjust the individual levels of the 5 1 channels The faders
217. d rmi files Adding MIDI tracks To add a new blank MIDI track to your project do one of the following From the Insert menu choose MIDI Track e Right click in the timeline and choose Insert MIDI Track Tip You can also add a MIDI track by pressing Ctrl Alt Q Adding MIDI files to a project You can add MIDI files to your project just as you would add audio files You can double click a MIDI file to create new tracks and events or you can drag a MIDI file from the Explorer or Media Manager window to an existing track to add a new clip Note When you select a MIDI file in the Explorer window its length tempo type and number of tracks are displayed at the bottom of the window Gun F_ s CC te Pal OS ly MIDI We AFASTERS MID El Echo Hat waw Basses AFNIK6 MIC Ej Fast Pan Hats wav canyon SHLFERSH MID a Drums n Perc faq Beat Box O4 way c Electronica E Guitars O keys O Odd Time Project H Product Information i Stereo Projects Explorer Media Manager Groove Pool Wl canyonmofo acd M MIDI 21 0 0000 at Multi tempo Type 0 1 Tracks When you right click a MIDI file in the Explorer window you can choose how you want to add it to your project 1 Add to Project Adds the file to the current ACID project and adds tracks to the track list No events are created e For Type 0 MIDI files a separate track is created for each channel in the MIDI file and all tracks are org
218. d down arrows or enter a value in the boxes to specify the minimum and maximum tempo available in the ACID project Changing this option affects the resolution of the Project Tempo slider Item Description Editing Application X Enter the name of each editor you want to display in the track list shortcut menu Right click a track in the track list and choose Edit in editor name to edit the media file associated with a track You can specify any editing tool you want to use however this feature was designed for use with destructive audio MIDI editors Browse Click Browse and select the exe file for each editor you want to have available in the track list shortcut menu Name Enter the name that you want to use to identify each editor The name is displayed in the track list shortcut menu and the Tools menu Clear Removes the specified editor from the Editing tab Check for latest versions of Sony When you select this check box the software automatically searches for the latest editors available Sony editors on your computer If one is located it appears as an available editor in the Editing Application X box Default All Restores all editing preferences to the default settings APPENDIX A 235 Using the Sync tab Setting sync preferences Generate MIDI Timecode settings Output device Frame rate Generate MIDI Clock settings Output device Choose a MIDI device from the drop down list MIDI timecode is sent to this dev
219. d mixer control has a small fader icon on its letter or number in the Mixer window Bus with Bus without automation automation Modifying track envelopes You can modify a track envelope for a bus assignable effect or soft synth in the same way you do with any other track For more information see Using track automation envelopes on page 113 Working with ReWire Using ReWire you can stream audio between applications in real time synchronize playback and use either application s transport controls to control playback in the synchronized applications The cursor position and loop region will be shared in the synchronized applications ACID can be used as a ReWire mixer host or a ReWire device client e When ACID is used as a ReWire mixer a soft synth bus in the ACID mixer connects the ReWire device application with the ACID audio engine During playback song position data is sent from the ACID window to the ReWire device application and the device will send its audio data back to the ACID soft synth bus control e When ACID is used as a ReWire device the ReWire mixer sends song position data to the ACID project and ACID sends its audio to the ReWire mixer ACID acts as a ReWire 1 0 device Using ACID as a ReWire mixer ACID can act as a ReWire mixer application After you enable a ReWire panel application to work within the software you can insert it as a soft synth control in the mixer and the soft synth bus connects ACID an
220. d projects choose devices from the Default Stereo and Front playback device Default Rear playback device and Default Center and LFE playback device drop down lists ReWire Device Driver Allows you to use ACID software as ReWire device pg 154 in a ReWire mixer application If a ReWire mixer application starts ACID software that ACID window will start in ReWire mode and cannot be switched from ReWire mode If a ReWire mixer connects to an existing ACID window that window will run in ReWire mode and you can switch out of ReWire mode if necessary If you exit that instance of the software and start ACID software again the new instance will start ReWire mode and you can switch out of ReWire mode if necessary by choosing a different audio device type Choose the device that you want to use for playing stereo sound data In a 5 1 surround project this device plays the right and left channels Selecting a device such as the Microsoft Sound Mapper allows Windows to select an appropriate device to use for the current sound data Note If you have selected Microsoft Sound Mapper you cannot assign busses to different devices Choose the device that you want to use for playing the rear channels right surround and left surround in a 5 1 surround project Choose the device that you want to use for playing the center and LFE channels in a 5 1 surround project The Playback buffering seconds slider specifies the total amount of buffering th
221. d the ReWire device and carries the data back and forth between them The applications share timeline and cursor position data ACID can mix or apply effects to your panel application s audio data output and then record the data Note The ReWire panel application data will not be included in playback or rendering if the panel application is not open Locating ReWire panel applications for use in ACID If you have ReWire panel applications installed on your PC you can select them for use as soft synth controls 1 From the Options menu choose Preferences The Preferences dialog appears 2 Click the ReWire Devices tab All installed ReWire panel applications appear in the Select ReWire Device to be available as soft synths box at the bottom of the dialog To choose the ReWire panel application you want to use select its check box 3 Click the OK button Inserting a ReWire panel application as a soft synth 1 Insert a ReWire panel application as a soft synth on the mixer just as you would a DLS or VSTi soft synth For more information see Adding soft synth controls to projects on page 144 2 The soft synth bus control is added to the Mixer window using the default settings and ACID attempts to start the device If the ReWire device application does not open you can start it manually 3 Use the ReWire device application s interface to open a project and adjust its settings Opening a ReWire device application When you add a ReWire
222. d you press Option lt Channel track two becomes track one Conversely if track one is selected and you press Option Channel gt track one becomes track two Press to exchange the behavior of the fader and V Pot when allowed The Display buttons control the behavior of the channel section controls Item 1 Meters Values 2 TimeFmt Zero _ Description When you re working with audio tracks or busses press to display meters or numeric values Even in Meters mode numeric values are displayed when you edit a value Hold the Shift button in the Modifiers section while pressing the Meters Values button to toggle control of tracks busses or tracks and busses e Press once to show audio and MIDI tracks e Press again to show audio tracks e Press again to show MIDI tracks e Press again to show busses e Press again to show all tracks and busses Press and hold to display the current time format Turn V Pot 8 while holding the button to change the format APPENDIX B 249 250 APPENDIX B Markers buttons The Markers buttons control additional track and channel settings Item 1 Marker 1 9 Automation Mode 2 Marker 2 10 Pan Mode 3 Marker 3 4 Marker 4 Input Monitor 5 Marker 5 Pre Post 6 Marker 6 Default 7 Marker 7 8 Marker 8 Add New buttons om oe Me Je Se ee O O A Description Press to place the cursor at marker 1 or hold Shift and press to place the cursor at marker 9
223. dd events to the track view The following sections describe three basic techniques used when working with audio events painting deleting and moving Painting events After you add a media file to your project you must paint it on the timeline in order to hear it When you paint on the media file s track you create an event that displays the file s waveform You can paint events on the timeline using either the Draw tool or the Paint tool Clips can also be painted on the timeline with the Draw and Paint tools For more information see Adding clips to tracks on page 107 Note Media files must be added to the project before either of these tools can be used to paint events Placing events with the Draw tool The Draw tool is the most common method of placing events on the timeline This tool allows you to add events one at a time In addition you can use the Draw tool to select edit and move events For more information see Adding and editing events on page 41 1 Click the Draw Tool button AI or choose Editing Tool from the Edit menu and choose Draw from the submenu The pointer displays as a pencil icon GETTING STARTED 41 42 Chapter 2 Place the Draw tool at the left edge of any track containing a media file Click and hold the mouse button while dragging the Draw tool to the right A waveform representing the event appears on the timeline as you drag the mouse Notice that if you are placing a loop file on the
224. dded to an event in the timeline MIDI controller adjustments such as pitch wheel and modulation wheel movements are recorded as track envelopes For more information see MIDI controller automation on page 131 MIDI controllers are recorded in latch mode envelope points are created when you change a control setting and recording continues until you stop playback When you stop adjusting the control the control s current setting overwrites the existing envelope points Note Envelope points are not thinned when recording MIDI controllers from a hardware device 7 To stop recording click the Record button again or click the Stop Li button on the transport bar A new clip is created for the recorded MIDI data on each armed track You can use the Clip Pool tab in the Track Properties window to manage clips Note You can also record into time selections punch into MIDI events or record multiple clips when recording into a selection with Loop Playback selected in the same way you record audio Using MIDI step recording Click the MIDI Step Record w button to open the MIDI Step Record dialog where you can record by specifying the interval between MIDI messages Step recording allows you to record notes with very precise timing WORKING WITH MIDI 165 166 Chapter 11 1 Connect a MIDI controller to your computer If you don t have a MIDI controller you can use the keyboard in the track view when in MIDI timeline editin
225. ddn pean cewadareed taenpeewsacreedaesseeas 113 Wsind the BeatmMaDNel 4asacwsase 0nseesieekera ae OEO as eee E RE 114 Understanding stretching properties 0 0 cc ccc ccc ccc cc cece eect eee teen eeeees 115 Configuring track PIOPeONIGS i000 avons ctanrciatiasetnecnnseend Vases beenwewnnstxasan es 115 Audio track Properties 6 6 8 0c4606ct dete deaddiddad dbase tdi d dee bee Reloaded dada Veda bade 115 WDC DODES carstaaccece trates dee eyes ede eue ewer ane aete tae nae one EARTE EEEE 115 Configuring clip PIOPEITICS cea nnscons ccanactaddas os ben asevaan eae dens hives eeaewnaes 115 Managing a track s clipS wou 6d 06 4 4 ded daw ech 06 4 0 a bet anda hd Aine Bokeh Ak ks hoa rien etc eck dv eew 116 Adjusting general clip properties 2 0 0 ccc ccc ccc cece cence eee e nee e nett ee eeeeennaes 116 Adjusting stretching properties for loop or Beatmapped clips 0 ccc cece eee eens 116 elece ale TICS 6 aca ncouesa6 ey Bonin ce ened tania E AE E O E E E 119 RODIAGCING MCS a ctwaaatesua E E scdude ce ENE EEES 120 Saving file PRODEIUCS 24c240ecg eves cueendavadecadeeeweaiasedersocesasuduecacrewetesaumoorns 120 Adjusting clip properties for MIDI tracks 1 0 0 0 ccc ccc ccc cence ence teen en eeeeeeneees 120 Working WIT OLOOVES 2 csencncewancietaeancstnaveneecanenesecuansouvaeheucee EAE 120 Applying Or removing grooves cece cece ccc cee eee eee e eee e eee eee eee eeeenaes 120 Creating CROOVES cisiscoacdn da osacade oa tosses ease
226. de cee eee Ho eS Sears e ae be ae ee A 20 Window docking area 6 6500b cna ceadccuscnsccadcetucnddendoetequaddateedaceaiseneouneneneens 22 Keyboard command reference 4 s aci0ev000005werevi sun niwewdecaediaawe dew dlaweewerseheuwadn 24 PICO SIGN GI TOW ou cccuee ee ecteceuus tre dieeetaraatueeusa ene NE EA EEES 31 WISIN AU TOW cererii tel sen cae ee eens ee cae oe a ed ee se ene es 33 Eca e EL aE S a wecontoaceewusnwiedoscuewuranwiaeese cteseaohawanseeesegueumenaeutts 35 ANNI POO E aea E AEEA E EEA 35 Setting project properties ssssusssesssessrsserssrererererereressersrerererereseees 35 Opening existing Projects tree acudaeetaer neuen AAKE EErEE AEE GEESE 36 Eeka e les ET E E E E T E E E E N 36 Previewing media from the Explorer WINdOW ssssssssussesesesrereresreserereseeserse 36 Adding media to the Project scirswiereserrered itiraf t EETILINE ANEEL EEEE AEREI EE EEEN 37 Obtaining or editing CD information using Gracenote cee eee eee eee eee eee eeees 39 Understanding clip TYPES one scctewen npwon ee eeawe enna meow dere ede eee esas eawaterneees 40 E OD cgeaeuie atv ware aoe e tbe ee sree eGo ue ae ee eee en eee an eee ces 40 OME SOUS paare nee econo a pias E ete ene oer enne4 eer eaaaes 41 Peat AD DCO M E E EE E E E E eu Ceedenyas 41 MO e E E E E E E O E E E E E E E E E AE 41 FORTC etie A E AA ESA E AA EA E E ESA EEEE RAA 41 Adding and editing events esseer riirr eteris rro ane renn mies ereer rro rere ETEN 41 PANIN I EVON a
227. dered mix For more information see Rendering projects with MIDI tracks on page 197 GETTING STARTED 53 54 Chapter 2 Saving projects An ACID project file acd is the default file format for saving a new project and should be used for saving unfinished projects There are two ACID project file types eS Format Extension Description ACID Project File acd Contains all information regarding the project including track layout envelope settings and effects parameters However this type of file does not contain actual audio only references to the audio files ACID Project with acd zip Contains all information regarding the project including Embedded Media track layout envelope settings and effects parameters In addition all audio files used in the project are embedded into the project file If you save a project in acd zip format the project file and all media files are copied to a temporary files folder If you continue to work on your project after saving the acd zip file your changes are saved to the files in this temporary folder You can customize the location of the temporary files folder For more information see From the Options menu choose Preferences to display the Preferences dialog on page 227 To save a file display the Save As dialog using any of the following options e Click the Save button E on the toolbar e From the Edit menu choose Save e Press Ctrl S From the Save in drop down
228. different from the Draw tool in that it can cross note row boundaries Use the Paint tool to add a random element to your ACID projects Note In drum grid mode the Draw and Paint tools both draw fixed length note events Using the Paint tool e Click the down arrow next to the Paint tool button and choose a note length from the menu e Click the Paint tool button to select the tool The Paint tool is selected and notes will be painted using the selected note length Note Right click with the Paint tool to erase notes Erase p Allows you to remove existing notes Inside an event drag in the row for the pitch you want to create to create a new note or click an existing note with the Erase tool g to remove it If you draw or paint notes beyond the event edge the event is automatically extended Hold Shift while dragging to override horizontal snapping press Shift after you click Tip n inline MIDI editing mode drag in the top portion of the track to create a new event using the active clip Sp I I I pal I Editing note positions 1 2 Click the Enable Inline MIDI Editing button fal l Use the scroll buttons at the left edge of the track to navigate the piano roll drum grid Select the notes you want to edit by doing either of the following e Click a note with the Draw tool wi to select it You can hold Ctrl while clicking to select multiple notes Use the Selection tool 3 to select multiple events by cl
229. display the Groove Pool window if it isn t already visible 2 Choose a setting from the Default groove for new tracks drop down list When you add a new loop one shot or MIDI track to your project the selected groove will be applied to the entire track Existing tracks are not affected Applying multiple groove events to a track Groove events allow you to apply grooves to portions of tracks or apply different grooves to various portions of a track The groove is applied where the groove event overlaps the media event The edges of groove events are boundaries for grooves and audio cannot be grooved beyond the event edges 1 Select the Groove tool 2 Click the down arrow next to the Groove toolbar button and choose a groove from the menu or double click a groove in the Groove Pool 3 Click and drag over a track to paint groove events in the same way you create other events on the timeline Groove events are displayed at the bottom of the track to indicate where a groove will be applied 4 Repeat steps 2 and 3 to paint groove events as needed WORKING WITH TRACKS 121 122 CHAPTER 7 To toggle the height of the groove strips choose Show Full Size Groove Strips from the View menu Tips e Drag a groove from the Groove Pool to an existing groove event to change the event s groove e Drag a groove from the Groove Pool to a space between two groove events to create a new groove event to fill the space between the e
230. displays the path to the folder where default grooves for new ACID projects are saved Click the Browse button to choose a different folder This folder is also used as the default location for saving exported grooves from the Groove Pool window Select this radio button if you want to save all project media in a single folder Select this radio button if you want to choose where to save each type of project media The following boxes display the location where each type of media file will be saved Record This box displays the path to the folder that will be used when you record new audio or MIDI tracks Click the Browse button to choose a different folder The folder you specify here is used by default for new projects but if you want to choose a project specific recorded files folder you can use the Recorded files folder box on the Audio tab of the Project Properties dialog Render to new This box displays the path to the folder that will be used when you render to a new track Click the Browse button to choose a different folder Chop to new This box displays the path to the folder that will be used when you create new tracks with the Chopper window Click the Browse button to choose a different folder Temporary files folder Free storage space in selected folder New MIDI This box displays the path to the folder that will be used when you export MIDI Click the Browse button to choose a different folder MIDI fil
231. dit media properties and stretching information use the Clip Properties window Audio track properties For audio tracks the Track Properties window displays the Clip Pool The Clip Pool is used to organize each track s media For more information see Using the Clip Pool on page 109 MIDI track properties You can use the Output Settings tab to adjust MIDI controllers voices and drum maps You can use the Input Filters tab to set up MIDI message velocity or quantize filters You can use the Clip Pool tab to organize each track s media and enable looped or one shot drawing for MIDI events By right clicking a clip in the Clip Pool you may access the Clip Properties window to use the Piano Roll Editor and List Editor tabs The Piano Roll Editor and List Editor tabs allow you to view and edit all MIDI data Configuring clip properties 1 Double click a track icon such as J to display the Track Properties window and the clips used on the track Note This section addresses clip properties for non MIDI clips For information on MIDI clip properties see Processing and filtering MIDI events on page 173 2 Double click a clip to open the Clip Properties window WORKING WITH TRACKS 115 116 CHAPTER 7 Once you modify the properties of a clip the information is saved with your project but does not alter the original media file If you want you can save your changes to the media file as well For more information see Saving file prope
232. djusting levels muting soloing and adding effects This chapter also describes how to automate mixer controls by viewing them in the track view and adding envelopes Using busses Think of busses as virtual pathways where signals from multiple tracks or effects can be mixed You can add as many as 26 busses to the Mixer window which provides you with a great deal of flexibility and mixing power Busses are the last stage of the ACID signal flow and as such can be used to output audio signals to specific hardware For more information see Routing busses to system hardware on page 141 Adding busses to the project Add a bus to a project by clicking the Insert Bus button a Insert Bus in the Mixer window or by choosing Bus from the Insert menu Adding multiple busses 1 Display the Project Properties dialog using one of the following methods e Choose Properties from the File menu e Press Alt Enter Click the Audio tab Enter a value in the Number of stereo busses box and click OK The busses are added to the Mixer window Routing tracks to busses If your project contains multiple busses you can assign tracks to specific bus outputs To assign a track to a bus click the Bus Assignment button on the track header and choose the desired bus from the menu Assigning tracks to busses allows you to apply settings to a series of tracks and to route tracks to a particular hardware output Note The Bus Assignment button only
233. ds In this example adding the Snare tag to a media file would mean that a search for Audio Drum One Shots or Snare would find your tagged media If the user rearranged the tag tree so that the Snare tag did not appear below the Audio and Drum One Shots tags searching for Audio or Drum One Shots would not find your tagged media ioe D amp Drum Loops AO ga Orum One Shots If you add all three tags to your media file a search for Audio Drum One Shots or Snare would find your tagged media even if the tag tree had been rearranged though this behavior is not always desirable ne High Torn fo TF Mid Tom ae ne Floor Tom a Search Results pane or by dragging a media file to a tag when the Remove Tag Mode button is selected Removing a tag from a media file You remove tags from media by dragging a tag from the tag list to a media file in the 1 Select media files in the Search Results pane e To select a single file click the file e To select multiple consecutive files click the first file hold the Shift key and then click the last item e To select multiple files that are not consecutive hold the Ctrl key and click each file Click the Remove Tag Mode button 7 in the Search pane Drag a tag from the tag tree to the selected file s The tag is removed from the file s Deleting a tag from a library
234. e CD and music related data from Gracenote Inc copyright 2000 2006 Gracenote Gracenote CDDB Client Software copyright 2000 2006 Gracenote This product and service may practice one or more of the following U S Patents 5 987 525 6 061 680 6 154 773 6 161 132 6 230 192 6 230 207 6 240 459 6 330 593 and other patents issued or pending Services supplied and or device manufactured under license for following Open Globe Inc United States Patent 6 304 523 Gracenote and CDDB are registered trademarks of Gracenote The Gracenote logo and logotype MusiclD and the Powered by Gracenote logo are trademarks of Gracenote ATRAC ATRAG ATRAC3 ATRAC3 plus ATRAC Advanced Lossless and the ATRAC logo are trademarks of Sony Corporation http www sony net Products ATRAC3 Madison Media Software Inc A subsidiary of Sony Corporation of America 1617 Sherman Avenue Madison WI 53704 USA The information contained in this manual is subject to change without notice and does not represent a guarantee or commitment on behalf of Madison Media Software Inc in any way All updates or additional information relating to the contents of this manual will be posted on the Sony Media Software web site located at http www sony com mediasoftware The software is provided to you under the terms of the End User License Agreement and Software Privacy Policy and must be used and or copied in accordance therewith Copying or distribu
235. e contents of the event if necessary For more information see Shifting the contents of slipping events on page 70 The existing event that you record into is not affected or deleted Instead the event now contains two media files each listed as a separate clip in the track s Clip Pool For more information see Using the Clip Pool on page 109 1 Place the cursor before the event to allow for pre roll 2 Press Ctrl and click the event to select it Tip You can record into multiple events by pressing Ctrl and making selections 3 Click the Arm for Record button on the event s track When recording into multiple selected events arm their respective tracks at this time Click the Record button on the transport bar to begin recording 5 Click the Record button again or the Stop button i on the transport bar to stop recording Recording into an event with a time selection Recording into a time selection allows for a pre and post roll during recording The time selection is adjustable to increase or decrease the pre and post roll duration During recording the selected event s edges serve as the punch in and out points You can create multiple punch in and out points by selecting more events within the time selection You may need to split an existing event into three pieces so that you can select a smaller portion of the event to record into For more information see Splitting events on page 64 1 Click the
236. e 144 Audio Plug In This window displays plug ins and settings for track assignable bus and soft synth effects chains Display the Audio Plug In window by clicking a track s Track FX button H by choosing Audio Plug In from the View menu or by pressing Alt 9 For more information see Using clips with tracks on page 107 and Adding effects to soft synth mixer controls on page 149 INTRODUCING ACID SOFTWARE 23 24 Chapter 1 Plug In Manager This window allows you to view and choose effects plug ins to be added to a track bus or assignable effects chain Display the Plug In Manager window by choosing Plug In Manager from the View menu or by pressing Ctrl Alt 1 Tips To add an effect quickly drag a plug in from the Plug In Manager window to a track bus assignable effects chain or soft synth bus Ifthe VST plug in you want to use isn t displayed in the list you can use the VST Effects tab in the Preferences dialog to add the plug in s folder and then click the Refresh button to scan for plug ins For more information see Using the VST Effects tab on page 234 Ifthe DirectX plug in you want to use isn t displayed in the list hold Ctrl Shift while restarting ACID and then select the Delete all cached application data check box to reset your preferences and rescan for DirectX plug ins Groove Pool This window allows you to view and edit the grooves in your project Display the Groove Pool by choosing Groove Pool
237. e V Pot 7 Turn to edit the current effect for a different channel e V Pot 8 Turn to choose other effects for the current channel Press the Inserts button again to view effects chains PS is displayed in the Assignment display The following example shows the effects chain on track one Audi TrcekNoisGate Track EQ TrackCmprss A PS mode uses the following controls V Pots 1 3 and 5 Turn to choose other effects for the current channel Press to edit the selected effect and enter PE mode V Pots 2 4 and 6 After choosing an effect with V Pot 1 3 or 5 press V Pot 2 4 or 6 to add it to the channel V Pot 7 If a channel has multiple pages of effects in the chain turn to display additional effects In the previous example Aud 1 1 2 means that track one has two pages of effects e V Pot 8 Turn to choose effects chains for other channels When lt No Insert gt is displayed above a V Pot you can turn the V Pot to view effects that you can add to the chain New effects are displayed with a Press the next V Pot to the right to add the effect Press to adjust track or bus settings using the F1 through F6 buttons e F1 Hold the button and turn the V Pot to change the automation recording mode for each track and bus track F2 Hold the button and turn the V Pot to change the current panning mode e F3 Not used e F4 Hold the button and turn the V Pot to change record input monitoring settings when you re using an ASI
238. e View menu choose Track Properties In the Track Properties dialog click the Input Filters tab Choose Message Filter from the drop down list at the top of the page U BF WN Select the Enable check box WORKING WITH MIDI 179 6 Select your recording options Item Description Record all Select this radio button if you want to record all MIDI messages from the input port Record selected items Select this radio button if you want to choose which MIDI messages you want to record Record unselected items Select this radio button if you want to choose which MIDI messages you want to ignore when recording 7 Choose a setting from the MIDI Message Type drop down list The box at the bottom of the page displays the available MIDI messages 8 Select the check box for each MIDI message that you want to filter When editing note messages you can double click the Min and Max boxes to type the notes you want to filter Tips e Ifyou re recording into two tracks you can use note message filters to split your keyboard and create two separate parts For example set track 1 to record only notes A1 to B4 and set track 2 to record only notes C5 to C9 If you assign track 1 to a plucked string bass soft synth and track 2 to a grand piano synth the low notes you play on your keyboard will be recorded only on track 1 and will be voiced by the bass The high notes you play will be recorded only on track 2 and will be voiced by the piano
239. e a meter to clip Clipping results in a distorted audio signal and displays in a red indicator at the top of the meter If the meter clips lower the volume and click the red clip indicator to reset the meter Continue adjusting the fader and resetting the meter until you eliminate the clipping Tip You can also reset a meter by right clicking it and choosing Reset Clip from the shortcut menu Saving rendering and delivering projects Though you are provided with the tools to quickly build impressive musical projects you may find yourself building elaborate projects over a period of weeks or even months While you are working on a project you should save it in the ACID native format the ACID project file acd Important f you save a project originally created in an earlier version of ACID software in ACID version 6 0 it will be unusable in earlier versions of the software Use the Save As dialog to save the project with anew name after editing it in version 6 0 When you are finished building a project you can render projects in a variety of formats You should determine the project s final format or formats based on how you will deliver the media For example you would render your project to a streaming media format if you plan to publish it to the Internet Note Be aware that projects containing MIDI files that are routed to external MIDI ports must be rerouted to internal DLS sets or VST instruments VSTi to be included in the ren
240. e an envelope one will be created when you adjust the fader If multiple tracks are selected all selected tracks are adjusted If you adjust the fader during playback the behavior varies depending on the selected automation recording mode For more information see Automating 5 1 surround projects on page 136 Assignable effects automation You can use assignable effects automation to vary the level of a track sent to an assignable effects chain Adding assignable effect envelopes An assignable effect envelope controls the level of a track sent to a particular assignable effect chain Before you can add an assignable effect envelope you must add an assignable effect chain to the project For more information see Adding assignable effect controls on page 142 1 2 Select the track to which you want to add the assignable effect envelope You may select multiple tracks Add the envelope to the selected track s in one of following ways From the Insert menu choose Envelopes and choose the assignable effect chain for which you want to add an envelope from the submenu Right click the track header in the track list choose Insert Remove Envelope from the shortcut menu and choose the appropriate assignable effect chain from the submenu A green line representing the envelope appears across the track s Adjusting assignable effects automation levels T Select the Automation Settings button t The fader handle is displayed a
241. e an instrument means to digitize and Store it The sample rate also referred to as the sampling rate or sampling frequency is the number of samples per second used to store a sound High sample rates such as 44 100 Hz provide higher fidelity than lower sample rates such as 11 025 Hz However more storage space is required when using higher sample rates See Bit Depth The sample value also referred to as sample amplitude is the number stored by a single sample In 16 bit audio these values range from 32768 to 32767 In 8 bit audio they range from 128 to 127 The maximum allowed sample value is often referred to as 100 or 0 dB The Secure Digital Music Initiative SDMI is a consortium of recording industry and technology companies organized to develop standards for the secure distribution of digital music The SDMI specification was created to answer consumer demand for convenient accessibility to quality digital music enable copyright protection for artists work and enable technology and music companies to build successful businesses A context sensitive menu that appears when you right click certain areas of the screen The functions available in the shortcut menu depend on the object being right clicked as well as the state of the program As with any menu you can choose an item from the shortcut menu to perform an operation Shortcut menus are used frequently for quick access to many commands The signal to noise ratio SN
242. e and creating a point in the line to indicate where the fade starts Then you pull the end point of the envelope down to inf Equalizing a sound file is a process by which certain frequency bands are raised or lowered in level EQ has various uses The most common use for ACID users is to simply adjust the subjective timbral qualities of a sound An instance of a media file on a track An event may play an entire media file or a portion of the file A file format specifies the way in which data is stored In Windows the most common audio file format is the Microsoft WAV format Audio uses frame rates only for the purposes of synching to video or other audio To synchronize with audio a rate of 30 fps frames per second is typically used To synchronize with video 29 97 fps drop is usually used APPENDIX D 271 272 APPENDIX D Frequency Spectrum Groove Hertz Hz In place plug in Insert Increment Insertion Point Loop Marker MIDI Channel Media Control Interface MCI Media File MIDI Clock MIDI Port MIDI Timecode MTC Multiple Bit Rate Encoding Musical Instrument Device Interface MIDI The frequency spectrum of a signal refers to its range of frequencies In audio the frequency range is basically 20 Hz to 20 000 Hz The frequency spectrum sometimes refers to the distribution of these frequencies For example bass heavy sounds have a large frequency content in the low end 20 Hz 200 Hz
243. e any splits or silent regions between events You would want to join events if you decided that the event should play uninterrupted over the specified time range 1 Select the events or range of events that you want to join For more information see Selecting multiple events on page 44 2 From the Edit menu choose Join or press J The selected events are joined Select all the events that you want to join You can also select the first and last events you want to join creating an event selection range After you join the events a single event appears Joining events is similar to dragging the edge of an existing event Automatic crossfades From the Options menu choose Automatic Crossfades if you want to automatically create crossfades when you overlap two audio events Note Event crossfades are not available for MIDI events Creating crossfades You can easily create crossfades between events by simply dragging an event 1 From the Options menu choose Automatic Crossfades to turn on automatic crossfades 2 Drag and event so that it overlaps another event on the same track A crossfade is automatically added to transition smoothly between the two events Changing fade types You can change a crossfade to use one of many combinations of fast slow linear smooth and sharp fade curves 1 Right click the overlapping area to display a shortcut menu 2 Choose Fade Out Type from the shortcut menu and choose a
244. e buttons 1 Perform either of the following actions to display the Tag Chooser dialog e Click an empty palette button e Click an existing button and choose Choose Tag from the shortcut menu Select the tag you want to assign to the button Click the OK button USING THE MEDIA MANAGER 79 80 Chapter 4 Clearing a button Right click a palette button and choose Clear from the shortcut menu Deleting a saved palette 1 Right click a palette button and choose Delete Current Palette from the shortcut menu 2 Click the OK button when prompted to delete the palette from your library Saving tags and properties to media files Saving tags and properties to files makes all your organization portable if tags and custom properties are saved to files that information will be preserved in the files and can be added to the library by selecting the Add tags and custom properties from files check box in the Add Files to Media Library dialog Saving tags and properties to files affects only the current media library and libraries that you create after saving the information If you have multiple libraries you can add embedded tags and custom columns to existing libraries by opening the desired library and rescanning your media folders with the Add tags and custom properties from files check box selected in the Add Files to Media Library dialog Embedded file properties are also updated when you preview or add media to a project The followi
245. e controls in the track header For more information see MIDI Track Envelopes and Keyframes on page 183 e Audio track effect parameters for automatable effects using the controls in Audio Plug In window For more information see Adding effect automation envelopes on page 130 e Bus soft synth and assignable effects output and panning levels using the controls in the Mixer window or bus track header e VSTi parameters using the controls in the Soft Synth Properties window e Surround panning keyframes For more information see Using the Surround Panner window on page 214 Tips If you want to record MIDI controller envelopes into a track using a hardware controller you can use MIDI merge recording to record the envelopes If you want to thin envelope points after recording automation you can select the Smooth and thin automation data after recording or drawing check box on the External Control amp Automation tab of the Preferences dialog or right click the envelope and choose Thin All Points or Thin Selected Points from the shortcut menu Recording automation settings 1 Add an envelope or automatable keyframeable effect to a track For automatable audio track effects you must add and effect automation envelope for each parameter you want to automate Select the Automation Settings button in the track header Click the Automation Settings button and choose Automation Write Touch or Automation Write Latch
246. e following are some possible general configurations Basic setup This setup includes a simple microphone and speaker that are connected to the computer s sound card With a more sophisticated microphone you would typically want to use a preamplifier for input to the sound card Sound card out Sound card in Setup with mixer This setup includes a mixer where the speaker and microphone connect The mixer is then connected to the computer s sound card Mixers usually have preamps built into them This diagram does not show you an instrument or a physical preamplifier such as a rack mounted component The reason for this omission is because these types of setups vary widely based on your mixer instrument and pre amp type Refer to your components documentation for specific setup configurations Mixer out Sound card out Sound card in HES a i Mixer in RECORDING AUDIO 155 156 CHAPTER 10 Setup with digital multitrack This setup includes a digital multitrack recorder with an optional MIDI synchronization component Usually you would have a mixer a microphone etc connected to these components Your particular setup will vary depending on your equipment Refer to your components documentation for specific setup configurations Digital card MIDI card Digital multitrack The dashed line indicated an option if you are synching ACID software to tape via a MIDI timecode MTC converter
247. e player Understanding track at once and disc at once ACID provides two ways to record audio to a CD R disc track at once and disc at once Track at once Track at once writing records individual tracks to the disc and results in a partially recorded disc However the CD R disc remains unplayable on most systems until you close the disc The advantage of track at once writing is that you can record tracks onto the disc as you finish them versus waiting until you have finished your whole album Track at once writing burns the entire project as a single track Disc at once Single Session or Red Book Disc at once writing is the most common burning method in the music industry This writing mode is used when creating a master disc to be sent to a disc manufacturer for mass replication Disc at once works just as it sounds Multiple tracks of audio are written to the CD in one recording session GETTING STARTED 57 58 Chapter 2 Burning single tracks track at once Note The entire project length is written to a CD track If your project has events on muted tracks that extend beyond the end of the audible material the muted events burn as silence at the end of your CD track To burn just a portion of a project create a loop region and select the Burn loop region only check box 1 Insert a blank CD in a supported CD R CD RW drive 2 From the Tools menu choose Burn Track at Once Audio CD Notice that the Burn Track at Once Audio
248. e plays at 0 dB while the other side provides no signal at all This pan type uses a linear panning curve WORKING WITH TRACKS 113 114 CHAPTER 7 e The Constant Power pan type is most useful for panning mono source material As you move the fader from side to side this pan type creates the illusion of the source moving around the listener from one side to the other in a semi circle This pan type uses the constant power panning curve e The Film pan type allows you to pan between pairs of adjacent speakers using a constant power model This mode is optimized for theater style speaker placement In stereo projects Film mode functions identically to Constant Power As you drag the pan point to the center speaker the sound becomes diffused through the front and rear speakers When the track is panned fully to the center speaker there is no output from the front and rear speakers Dragging the pan point to the center of the surround panner sends the signal to all speakers You can choose a pan type as a default for all new tracks you create For more information see Setting default track properties on page 227 Using the Beatmapper When you add a file to a project that is longer than 30 seconds the Beatmapper Wizard starts This allows you to decide whether or not to add tempo information to the file The Beatmapper identifies a file s downbeats and measures allowing the file to stretch compress in conjunction with the project s tempo
249. e redo history Using redo To redo an edit click the Redo button on the toolbar or press Ctrl Shift Z Edits are re performed in the reverse order they were undone Tip You can also redo the most recent undone edit by choosing Redo from the Edit menu GETTING STARTED 49 50 Chapter 2 Redoing a series of edits Clicking the down arrow next to the Redo button displays the project s redo history The history displays as a drop down list with the most recently undone edit located at the top Redoing an edit in the list requires all subsequently undone edits to be re performed as well 1 Click the arrow to the right of the Redo button The redo history appears 2 Locate the edit to be redone Notice that all subsequently undone edits are automatically selected and the total number of edits to be redone is indicated at the bottom of the drop down list 3 Click the edit to be redone The project is restored to the state it was in prior to the selected undone edit Tip Clicking the desktop outside the drop down list cancels the redo operation Clearing the undo history You can clear the undo and redo histories without closing the project or exiting the application After the histories are cleared new ones are created as you continue building the project 1 From the Edit menu choose Clear Undo History A confirmation dialog appears alerting you that this action permanently deletes the current edit histories 2
250. e tracks between different compositions You can paste a track in one of the following ways Click the Paste button E on the toolbar Choose Paste from the Edit menu Right click the track view and choose Paste Track from the shortcut menu Press Ctrl V GETTING STARTED 47 Adjusting the mix You can adjust the mix of a specific track in the track header Volume and pan each have dedicated sliders to make adjustments Assignable effects and busses share a multipurpose slider Click the multipurpose slider to choose what you want to adjust e Sound Fx El S vol 64d 4 Touch Pan 20 R l G CIMEM Multipurpose slider mode FX a 0 7 dB es lt Multipurpose slider Fx 1 7 0 dB FX 2 0 7 dB Bus 4 0 0 dG Once you have chosen what you want to adjust drag the slider to adjust the level You can hold Ctrl or Shift to select multiple tracks and move the sliders together as a group Function Description Volume This dedicated volume slider controls how loud a track is in the mix A value of 0 dB means that the track plays with no boost or cut from the software Dragging the fader to the left cuts the volume dragging to the right boosts the volume Pan This dedicated pan slider controls the position of a track in the stereo field Dragging the slider to the left places the track in the left speaker more than the right while dragging the slider to the right places the track in the right speake
251. ecording audio to your CD immediately GETTING STARTED 59 e Test first then burn CDs performs a test to determine whether your files can be written to the CD recorder without encountering buffer underruns No audio is recorded to the CD during the test and recording begins after the test if it is successful e Test only do not burn CDs performs a test to determine whether your files can be written to the CD recorder without encountering buffer underruns No audio is recorded to the CD 7 Select the Render temporary image before burning check box if you want to render your CD project to a temporary file before recording Prerendering can prevent buffer underruns if you have a complex project that cannot be rendered and burned in real time Note The rendered temporary file will remain until you modify your project or exit If an image file exists when you Open the Burn Disc at Once Audio CD dialog the check box is displayed as Use existing rendered temporary image 8 Select the Automatically erase rewritable discs check box if you re burning to rewritable media and want to erase the disc before burning 9 Select the Eject when done check box if you want the CD to eject automatically when burning has completed 10 Click OK to start burning 60 Chapter 2 Chapter 3 Editing Events In this chapter you ll learn about basic event editing techniques such as cutting copying pasting trimming splitting and joining events You
252. ect such as chorus or reverb to your project For more information see Adding assignable effect controls on page 142 Press B to view bus tracks For more information see Automating mixer controls in track view on page 152 3 Right click the bus track for the assignable effect control choose Insert Remove Envelope from the shortcut menu and choose Pan from the submenu A pan envelope appears on the bus track Drag the envelope down to 100 right 5 Use the multipurpose slider on the track to which you want to apply the effect to make three changes e Pan the track 100 left e Set the assignable effect send to approximately the same volume as the track e Set the assignable effect send to Pre Volume Preview the effect The dry signal is panned to the left and the wet signal with the chorus or reverb effect is panned to the right Pan the track hard left match the assignable effect and set the assignable effect send to send level to the track volume Pre Volume EB cuter Eek Sf H cutar El e S I H cuitar Eley S I voli ood cs ix Touch Yolk a Touch vo aid ac 8 Touch Pan 100 L K G Hyper Pan 100 Lehk Hyperf Pan 100 Lajh A Hyperf Fei 44d te Fei 4 4 dB a FXi 33 0dB 7l e Post volume Playing double time half time You can also produce interesting effects by misinforming ACID regarding the number of beats in a file Configuring a file with half its actual number of beats re
253. ected ACID automatically checks whether acd acd bak and startup acd zip are associated with ACID and prompts you to restore the file association if necessary Do not query Gracenote for CD When this check box is selected ACID will not attempt to obtain disc information from information Gracenote MusiclD when you insert an audio CD Recently used project list Select the check box and enter a number in the box if you want to list your most recently used projects at the bottom of the File menu Default All Restores all general preferences to the default settings APPENDIX A 229 230 APPENDIX A Using the Audio tab Item Open files as loops between seconds Quick fade edit edges of audio events Quick fade time ms Waveform display while recording ACID type for recorded audio Record action when nothing is armed Include project name when naming recorded media Default All Using the Audio Device tab Item Audio device type Description Enter a lower and upper limit to specify which files will be opened as loops if stretching properties are not saved in the file Files that are shorter than the lower limit will be opened as one shot tracks files longer than the upper limit will the Beatmapper Wizard pg 114 When the check box is selected ACID software will place a rapid fade on the edges of audio events 10 ms by default to soften potentially harsh transitions When the command is not selected
254. ed of the note s release 0 127 Low values produce a soft release high values produce a staccato release Duration Length of the note s sustain in measures beats ticks WORKING WITH MIDI 193 194 Chapter 11 Event type Packed NRPN Packed RPN Patch Pitch Bend Poly Pressure Program Change Editable parameter Start Time Channel NRP MSB NRP LSB Data MSB Data LSB Start Time Channel NRP MSB NRP LSB Data MSB Data LSB Start Time Channel Bank LSB Bank MSB Patch Start Time Pitch Start Time Channel Note Pressure Start Time Channel Patch Description Time in measures beats ticks where you want the event to begin MIDI channel 1 16 where you want to send the event Parameter s most significant byte Parameter s least significant byte Value for the most significant byte Value for the least significant byte Time in measures beats ticks where you want the event to begin MIDI channel 1 16 where you want to send the event Parameter s most significant byte Parameter s least significant byte Value for the most significant byte Value for the least significant byte Time in measures beats ticks where you want the event to begin MIDI channel 1 16 where you want to send the event Least significant byte value for the bank Most significant byte value for the bank Number of the patch you want to play Time in measures beats ticks where you want the event to begi
255. edanewieseneestwiovater can dewseeundetnecagunnewwsess 52 Using the Mixer Ss faders s iiiwsccnsteesbeianndeeeseeaseeeseaae Rene dt eeidaweehdeedacaareeads 52 Saving rendering and delivering projects ccc cece cece eect eee eee neeeeees 53 SAVING T O O 22205205525 EERE E ceo ser esses eeaewosonesssscas see E E sees 54 Rendering Projects 35 005 lt 0neceeaiis ch eae ceca con weenouessouaeenesencoreeeueues cenaeedaeers 54 Publishing to the Internet s serineto etera eee eee e eee e ee eeneenes 56 UNITO CD oa a E E aya E E cen aseuueuceuas 57 Understanding track at once and disc at once cece ccc ccc ccc cee eee eee ee eee enn eees 57 EUN EVON aeara nn e E E EE E AE ee eee 61 CODVING VEN S crscrrrecrersi ered uebi s einan E a a ek ome 61 PIN OTO ea EAEE ES E E NE AT EAER E EESAN eae 61 Using Paste Repeat oesririsisrsrisrercirririeterrrrie tiekie 62 Ueda a e E E N E EEE E T E E TE 62 CUNO SVO 4 een na aE EES EEI A AE E E EEN EEA TETEA 63 Deleting EVEN eerren E EE A E E E EE EEE EVGA 63 REEVESIN EVENS 9 06266554200ucnateen newer areeneacnawacesadereadeuueunsaahaeeeseoiuss 63 RENAN VOA aaar aace ing erase ini ee as re eee ae Rude Roane odas ose eanetedacec 63 SOMCUING OVON sise rrr to trene TEIE unde vere e es nee ee nunus Maes ewes EAEE 64 Splitting at the cursor POSITION 1 0 cece cece cece eee eee e ene eeeeeees 64 SOMO OME EVEN 4242 40cu0 E EAE TEE EE ENE RERE E OE EE EAA EAEEREN EA 65 Splitting Multiple eEVeNtS ccc eee
256. edia from existing Sony Sound Series Loops amp Samples or Loops for ACID collections when you add media to your library For more information on Media Manager options see Setting Media Manager options on page 86 Note The Sony Sound Series Loops amp Samples reference library is not installed by default but you can install it from the ACID CD or download it from the Sony Media Software Web site http mediasoftware sonypictures com reference After installing the library go to the Media Manager Options dialog and choose the reference library from the Reference library drop down list Tip f the Save media usage relationships in active media library check box is selected on the General tab of the ACID Preferences dialog you can add individual files to a library by previewing the files in the ACID Explorer window 1 Click the Add Files to Media Library button E The Add Files to Media Library dialog is displayed 2 Choose the folders that will be searched for media a Ifitisn t displayed automatically click the Add Folder button 1 to display the Browse for Folder dialog b Select the folder you want to search c Click OK Tips Ifyou want to change an item in the folder list select it and click the Browse button in the Folders column If you want to remove a folder from the list select it and click the Remove Folder button X 3 Repeat step 2 for each folder you want to search Select the Include subfolders check box
257. ee e eee eeeeenes 148 SUING MIXT COMMONS eerren curse wees oe wan aelen ea Sexi en oe en ono en wew os wae ee maeemen 148 Working With Mixer controls 245440 s6cunewhunoind tenses eanied OENE dows weeny awd 148 Adding effects to soft synth mixer controls 0 0 cece eceee eee ee eee e ee eeennes 149 Working with multiple mixer controls 2 0 ccc ccc ccc cee cece eee eee nent eeeeees 151 Automating mixer controls in track view ccc cece eee eee e eee e eee e eee eeeeaes 152 Working With IRE WING ins Geant erimi neues tiise buen dinnans in eet ieee eles ENTEVE ERES 152 Using ACID as a ReWire mixer 0 0 ec ccc cee ccc cee e eee e eee e eect eee teeeeeeneees 153 Using ACID as a ReWire device 0 ccc ccc cece cece ete e eee eee eee eeeennnes 154 ReCOIGING AUO s areir eE ANE EEEE te daseseensous 155 Setting up your equipment sssssrssssessserecessessserecerssereeersreresee 155 STE EIU e EEA ERTI SLATE TTE EET EEE PTEE EPE PIETET TAT TEETE 155 CO N MIME a E E EE AE EE EEEE EE 155 Setup with digital multitrack cece eee eee ene e eee eeeeeees 156 PrEDariInG TO TECON rer reer Err EEEE EERE SEEE 156 Arming the track for recording cece ccc ccc ence nett ee ene eee e eee eeeeneeneees 156 Selecting recording settings cece cece eee eee eee e eee eee ee nena eeeeeees 157 USING INCIMEIIONOMNG seriserssrsperi Bid dewce iri eiie Era si E Na 157 ESEE EIN a EEEE E EEE E E EEEE ETE T ETE 157 TABLE OF CONTENTS 7
258. egions with a media file check box to include sections in the rendered media file If the information cannot be saved to your media file an sfl file will be created using the same base name as your media file Select the Save each track as a separate file check box to save each track in your project to a separate file All of the volume adjustments panning FX and events are saved with the track You can also use this feature to create tracks that you can use in multitrack recording software or Macromedia Flash If your project contains video you can select the Stretch video to fill output frame do not letterbox check box to have your video reformatted so that it fills the output frame size listed in the Description box When the check box is cleared the current aspect ratio is maintained and black borders are added to fill the extra frame area called letterboxing If your project contains video and you see unacceptable artifacts in the rendered video you can clear the Fast video resizing check box Turning off this option can correct the artifacts but your rendering time will increase significantly Click Save A progress dialog appears When rendering is complete you can choose one of the following options Click Open to start the associated media player and play the newly rendered file Click Open Folder to open Windows Explorer and display the location of the newly rendered file Click Close to close the progress dialog and ret
259. elect a new file the new file plays back along with your project This feature allows you to listen to the media file in the context of your project Adding media to the project You must add media files to a project before you can paint arrange and process them When you add a file to a project a new track is created to accommodate it New tracks are added at the current volume of the Preview fader in the Mixer window unless you have set a default track volume level For more information see Setting default track properties on page 227 There are several methods of adding media files to a project Notes Proxy files may be created for media whose compression scheme may cause working with them to be inefficient and slow For more information see Proxy File on page 273 e Before using long Beatmapped or long one shot files from CDs or shared network folders copy the media to your local drive for the best possible performance ACID temporary files When you add a media file to a project from a removable device a copy of the media file is stored in the temporary files folder This keeps the media file available for use even if the source of the media is no longer accessible Be aware that the temporary files folder is cleared when you close the ACID application However files are not cleared from the folder if the software closes inappropriately Note You can customize the location of the temporary files folder For more information
260. election you want you can insert the selection into the track view Placing files in the Chopper To place a file in the Chopper do any of the following e Select a track in the track list e Select an event e Right click an event and choose Select in Chopper from the shortcut menu Note f you choose Select in Chopper on an event that contains only a portion of a file the entire contents of the file are placed in the Chopper The part of the waveform selected however matches the contents of the selected event This allows you to see the event in the context of the entire media file Creating selections To create a selection drag the mouse or hold Shift while pressing the arrow keys A shaded region appears in the Chopper to indicate the current selection and its start point end point and length display at the bottom right corner of the window in measures beats ticks format You can preview the selection at any time by clicking the Play button on the Chopper s transport bar or pressing Space Increment arrow 5 OD 00 00 Oo al 010 Start End Length Note n addition an increment arrow appears on the track view above the selected block For more information see Inserting increments on page 103 As you make a selection in the Chopper a colored block appears in the track view This block indicates where the selection will be placed on the track view when you insert it from the Chopper tle ACID PRO
261. em as necessary For more information see Adding pauses on page 59 Position the cursor at the start of an audio file From the Insert menu choose CD Track Marker The marker appears in the marker bar and is automatically numbered Important You must place your first CD track marker at the beginning of your project Audio placed before the first marker will not be burned to CD Tip Once you have inserted a marker you can move or delete them as needed 4 Repeat step 3 until you have marked all CD tracks Burning a disc disc at once 1 Inserta blank CD in a supported CD R CD RW drive 2 From the Tools menu choose Burn Disc at Once Audio CD The Burn Disc at Once Audio CD dialog appears 3 From the Drive drop down list use the CD drive that you want to use to burn your CD 4 From the Speed drop down list choose the speed at which you want to burn Max will use your drive s fastest possible speed decrease the setting to prevent the possibility of buffer underruns 5 Select the Buffer underrun protection check box if your CD recorder supports buffer underrun protection Buffer underrun protection allows a CD recorder to stop and resume burning Note Buffer underrun protection can create a disc that can be played in CD players but may contain a bit error where burning stopped and restarted Consider clearing this check box when creating a premaster disc 6 Choose a radio button in the Burn mode box Burn CDs begins r
262. em to view its description My Documents See also My Documents g My Network Places My Computer My Computer a 6 object s 165 MB My Computer a File name SampleProject wav v Eee Y P My Network k Places Save as type Wave Microsoft wav Template 44 100 He 16 Bit Mono POM y Description Render 44 100 Hz 16 Bit Mono PCM wave file a Render options C save project as path reference in rende C Render loop region only Save project markers with media file C Save sections as regions with media file v Burning AC 3 files to DVD With the addition of the AC 3 DVD Burner included in the Sony 5 1 Surround Plug In Pack you can burn AC 3 files to a DVD 1 From the Tools menu choose Start AC 3 DVD Burner The AC 3 DVD Burner application starts 2 Follow the instructions for burning a DVD in the AC 3 DVD Burner online help To access online help click Help in the AC 3 DVD Burner screen Appendix A Customizing ACID Software You can customize the software to suit your project needs and working preferences You may change these settings at any time If you use the same settings for all of your projects you may set the ACID application to use your settings as defaults In this chapter you will find information about functions that allow you to customize and set the application s preferences Working with ACID windows The software has various windows that allow you to perform specific
263. emarks of Dolby Laboratories AAC is a trademark of Dolby Laboratories PNG file format Copyright 2006 World Wide Web Consortium Massachusetts Institute of Technology European Research Consortium for Informatics and Mathematics Keio University All rights reserved This work is distributed under the W3C Software License in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTIBILITY or FITNESS FOR A PARTICULAR PURPOSE http www w3 org Consortium Legal 2002 copyright software 20021231 Apple QuickTime Apple QuickTime application is a trademark of Apple Inc in the United States and other countries Apple Macintosh Audio Interchange File Format AIFF file format Apple Macintosh Audio Interchange File Format AIFF is a trademark of Apple Inc in the United States and other countries Targa file format The Targa file format is a trademark of Pinnacle Systems Inc Tagged Image File Format TIFF Adobe Tagged Image File Format is a registered trademark of Adobe Systems Incorporated in the United States and other countries All rights reserved Main Concept encoder Main Concept plug in is a trademark of registered trademark of Main Concept Inc in the United States or other countries All rights reserved Macromedia Flash Macromedia and Flash are trademarks or registered trademarks of Macromedia Inc in the United States and or other countries Gracenot
264. emove iz Ripple Edits Move Up Move Down ofl ee ae Snap to Grid Only 4 Click Add The new button is added above the selected button on the Current toolbar buttons pane i Play Fr Paste 4 Tip You may also double click a button in the Available toolbar buttons pane to add it to the toolbar 5 Click Close to save the toolbar settings and close the dialog Removing buttons from the toolbar You may remove buttons and separators from the toolbar If you have added buttons to the toolbar removing unused or unwanted buttons allows you to maximize the toolbar s space You may remove toolbar buttons either directly on the workspace or via the Customize Toolbar dialog Removing buttons on the ACID workspace 1 Hold Shift and drag the button that you want to remove off the toolbar A hand icon my within an outline of the button indicates that you are removing the button 2 Release the mouse to remove the button APPENDIX A 225 226 APPENDIX A Removing buttons in the Customize Toolbar dialog You may return the toolbar to its default settings by clicking the Reset button on this dialog 1 From the Options menu choose Customize Toolbar The Customize Toolbar dialog appears 2 Onthe Current toolbar buttons pane select the button that you want to remove 3 Click Remove The button is removed from the Current toolbar buttons pane and will not appear on the toolbar Tip You may also doub
265. equire a specific cutoff frequency and rolloff while other encoders require that no filter be applied before encoding 5 Click OK The track list and Mixer window switch to 5 1 surround mode The Master bus becomes the Surround Master bus which contains faders for each of the six surround channels Surround panners appear on tracks and mixer controls Tracks routed to mixer controls busses assignable effects or soft synths do not have surround panners panning for these tracks takes place on the mixer control Track list in 5 1 surround mode Mixer in 5 1 surround mode Electric Guitar 03 Ely G OPF Mixer x 7 x walt 12 0 dB i A Electric Guit 4 Surround 44 100 Hz 16 Bit ik e 4 og Insert Fx T Insert Bus f Insert Soft Synth Electric Gu panner 5J Surround Master end ue Bus A Pipe Organ z Electric Guitar 04 Et amp G Vol 12 0 dB J wel tric Guit gt a O El F amp 7 O El F amp 7 O aaa u ee Front Rear Center LFE 3 i El oie t QI ae m i 118 Inf LFE bg ane rps en vol 14 0 dE m Electric Dul pE Track routed pe i f n 116 116 to LFE pn paci rae 64 6 4 r F Electric Dulcim At amp 18 18 se Li vol 14 0 dE m d Electric Dul q Track routed Ret eae rl i to Bus aan 4 eal fed fl Organ OBNS O 38 36 30 me 100 J Center 1 M MIDI track B ae 42 4 42 routed to ro ae 48 7 48 7 a 54 soft synth
266. er in the Mixer window Previewing single events When monitoring is enabled the list editor will play events when you select them WORKING WITH MIDI 191 192 Chapter 11 1 Inthe list editor click the Monitor button 4 to turn on the event monitor 2 Click anywhere in an event row to play the event Playing MIDI files In list editor you may play your MIDI file by using the buttons on the transport bar Item Loop Playback Play from Start Play Pause Stop Go to Start Go to End Setting a loop region Icon Z E 7 Description Click to toggle looped playback mode When the button is selected only the events between the mark in and mark out points will be played Plays the entire MIDI file from the beginning regardless of cursor position Plays from the current cursor position Halts playback The next time you click Play playback will begin with the last event played Halts playback The next time you click Play playback will begin with the first event in the list Moves the cursor to the beginning of the list Moves the cursor to the end of the list When the Loop Playback button is selected you can set a portion of the edit list to play repeatedly The beginning end and length of the loop region are displayed in the Loop boxes in the lower right corner of the List Editor tab SS oe E E Select the Loop Playback button Select the first event you want to play Click
267. eric Control entry in the Active control devices list to display the Configure Generic Control dialog 4 To add or change a function do the following a Choose a setting from the View function group drop down list b Select the Learn check box c Select an command in the Host Command list and activate the control on your control surface d You can click the Edit button to fine tune the MIDI message settings Repeat step 4 for each command you want to make available on your control surface To remove a function select an item in the Host Command list and click the Reset button To remove all functions click the Reset All button Aan po Click the Save As button to save your updated configuration file 258 APPENDIX B Loading a control mapping file 1 2 3 From the Options menu choose Preferences to display the Preferences dialog Select the External Control amp Automation tab in the Preferences dialog Double click the Generic Control entry in the Active control devices list to display the Configure Generic Control dialog Click the Open button and browse to the mapping file you want to use Click OK to apply your changes and return to the Preferences dialog Click OK to close the Preferences dialog Example of how you can set up MIDI keyboard as a generic control surface If you have a MIDI device that has knobs faders and buttons you can use assign those controls to adjust the tracks in your project
268. ers tab of the Preferences dialog Grooves in this folder will be available in the Groove Pool window when you create a new ACID project 4 Typeaname in the File name box or select a file in the browse window to replace an existing groove 5 Click the Save button to save your groove Creating a new groove 1 Click the New Groove button 6 A new groove is added to the Groove Pool window 2 Type a name for your groove in the edit box and then press Enter Use the Groove Editor at the bottom of the Groove Pool window to adjust the length and feel of your groove For more information about editing grooves please see below WORKING WITH TRACKS 123 Editing grooves You can use the bottom portion of the Groove Pool window to edit grooves Your edits are saved with your project If you want to use the edited groove in other projects you ll need to export it as a groove file and import the edited groove in each project where you want to use it 1 From the View menu choose Groove Pool to display the Groove Pool window 2 Select a groove in the top portion of the window Tip f you want to audition your edits in real time apply the groove to an event and start looped playback before you start editing the groove The bottom half of the Groove Pool window displays your groove as a timeline with beat anchors and groove markers to represent how beats will be adjusted You ll notice that this view is similar to the Stretch
269. erties window is displayed 2 Inthe Soft Synth Properties window click the External MIDI Input Port button 87 and choose a port from the menu Locating VST instruments A folder is designated where you can store VST instrument files However if you have VST instrument files elsewhere on your system you can direct the software to look for files in alternate locations 1 From the Options menu choose Preferences The Preferences dialog appears 2 Click the VST Instruments tab The Default VSTi search folder box shows the default location of VST instrument files for use in ACID VST instrument plug ins located in this folder already appear in the Select VST instruments to be available as soft synths box at the bottom of the dialog If the VST instrument you want to use appears in this box select its check box If the VST instrument does not appear in the box continue with the following steps to locate the instruments for use in ACID 3 Click the Browse button next to the Alternate VSTi search folder 1 box The Browse for Folder dialog appears Browse to the location of your VST instrument files and click OK The VST instrument plug ins are located and displayed in the Select VST instruments to be available as soft synths box at the bottom of the dialog 5 Repeat steps three and four for the Alternate VSTi search folder 2 box if needed In the Select VST instruments to be available as soft synths box select the check boxes for t
270. es are not created when you record MIDI or create new MIDI clips MIDI data for clips is stored within the ACID project Extract from CD This box displays the path to the folder that will be used for tracks that you extract from audio CDs Click the Browse button to choose a different folder Render project This box displays the path to the folder that will be used when you render your project Click the Browse button to choose a different folder Displays the folder where temporary files are stored Click Browse to specify a new folder When you add a media file to a project from a removable device a copy of the media file is stored in a temporary files folder This keeps the media file available for use even if the source of the media is no longer accessible Be aware that this folder is cleared when you close the software However the temporary files are not cleared if the software closes inappropriately This value displays the amount of space available in the folder specified in the Temporary files folder box Using the External Control amp Automation tab Use the External Control amp Automation tab to set up and customize control surfaces From the Options menu choose Preferences to display the Preferences dialog Click the External Control amp Automation tab For more information see Configuring a Mackie Control Universal on page 204 Note From the Options menu choose External Control to enable your selected contr
271. escription Use these controls to change the default colors used to display tracks in your project Select a track from the Track drop down list and then click the color swatch to display a color picker You can choose any color using the RGBA or HSLA controls or click the eyedropper to sample a color from your screen When you click OK or Apply all tracks that used the selected color are updated To customize an envelope s color select an envelope from the Envelope type drop down list Click the color button to the right to display the Envelope Color dialog and choose a custom color Drag the slider to adjust the color intensity of icons in the ACID window Drag to the left to decrease the color saturation or drag to the right to increase it Drag the slider to adjust the amount of tinting that is applied to the icons in the ACID window Drag the slider to the right to add an average of the title bar colors to the icons Drag to the left to decrease the amount of tinting applied Description Select this check box if you want to preview multiple selected files in the Explorer Enter values in the Number of times to repeat each Loop Seconds of each One Shot to play and Number of Beatmapped measures to play boxes to specify how different file types are previewed Description This box displays the path to the folder that will be used for creating new projects Click the Browse button to choose a different folder This box
272. ese events will Existing events on the tracks adjust later in Paste be pasted the project position Note Pasting in ripple editing mode ripples only the events on the tracks that receive the clipboard contents Ifyou want to ripple all tracks at the paste position use the Paste Insert command from the Edit menu Slipping and sliding events To help you picture what happens when you slip and slide events think of an event as a window to a media file The window can display the entire media file or a small section When the window displays only a portion of the media file you can move either the window or the underlying media to adjust the media played by an event e When you slip an event your event maintains its place on the timeline but the media file moves in the direction you drag EDITING EVENTS 69 70 Chapter 3 e When you slide an event the media file maintains its place on the timeline but the event moves in the direction you drag Original loop event Slipping the event two measures to the right Slip trimming the event two measures to the right Sliding the event two measures to the right Shifting the contents of slipping events Hold Alt while dragging an event The slip cursor appears As you drag the event the contents of the event shift but the event does not move You can use this technique when you want to maintain an event s length and position but want the to event play a different sectio
273. etching properties 116 119 Beatmapper wizard 114 Bit depth 35 Burning CDs 57 Bus automation 128 129 Adding bus envelopes 128 Adjusting bus automation levels 129 Bus tracks 152 Busses 141 142 148 152 Adding 141 Adjusting levels sent from tracks 113 136 141 Assigning tracks to 19 141 Automating parameters 128 129 Automation 128 Bus send volume envelopes 132 Deleting 142 Panning 214 Routing assignable effects to 143 Routing to hardware 141 Using effects 149 Using the control 148 Index i ii Index CD Extracting media 38 Writing media 57 Changing a section s color 73 Changing an event s clip 109 Changing the track color 47 Choosing a drum map for a track 201 Chopper 23 101 106 Grid 101 Inserting increments 103 Inserting selections from 105 Keyboard shortcuts 102 Markers and regions 102 Saving selections as new files 105 Selecting audio 102 Snapping options 101 Tips and tricks 266 Using with one shots 106 Window 101 Clearing all events from a section 74 Clip properties Adjusting for MIDI tracks 120 Changing clip types 116 Clip Properties window 115 186 Clipping 53 Clips Adding to tracks 107 Changing pitch 98 Clip Pool 109 Copying across tracks 108 Copying across tracks without copying events 109 Loops 40 One shots 41 Paint Clip Selector button 20 Previewing 109 Setting the active clip and creating events 107 Types 40 Cloning l
274. events Pitch D8 D 8 E8 F8 F 8 G8 G 8 A8 A 8 B8 C9 C 9 D9 D 9 E9 F9 F 9 G9 G 9 A9 A 9 B9 C10 C 10 D10 D 10 E10 F10 F 10 G10 Click the Insert Event button Eg The Insert MIDI Event dialog appears Choose an event type from the Event type drop down list Enter a start time in the Start time box Enter values for the remaining event parameters Click Insert The new event is inserted at the designated start time MIDI Key Frequency 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 2349 3 2489 0 2637 0 2793 8 2960 0 3136 0 3322 4 3520 0 3729 3 3951 1 4186 0 4434 9 4698 6 4978 0 5274 0 5587 7 5919 9 6271 9 6644 9 7040 0 7458 6 7902 1 8372 0 8869 8 9397 3 9956 1 10548 1 11175 3 11839 8 12543 9 You can use the MIDI Quantize dialog to force events to align with musical beats based on the parameters you specify 1 Tip Hold Shift or Ctrl while clicking event rows to select multiple events To quantize only specific events select the events you want to quantize in the list editor WORKING WITH MIDI 195 Click the Quantize button EP The MIDI Quantize dialog appears From the Quantize resolution drop down list choose the beat to which you want the selected events to be quantized 4 Choose the appropriate options for quantizing e Select the Start times check box to snap e
275. fade curve from the submenu to set the curve for the first event s fade out 3 Choose Fade In Type from the shortcut menu and choose a fade curve from the submenu to set the curve for the first event s fade in Ripple editing ACID includes a ripple editing feature This feature allows you to cut delete and paste events or portions of events within a time selection and simultaneously adjust the position of all later events on a selected track The existing events timeline position adjusts by the total amount of the time selection that is being cut deleted or pasted from the clipboard You may turn on ripple editing mode by choosing Ripple Edits from the Options menu or pressing Ctrl L Note Ripple editing is only available when a time selection is present Cutting events in ripple editing mode Cutting events or portions of events removes them and their time information from their respective tracks This information is placed on the clipboard from which you may paste the information back into your project 1 From the Options menu choose Ripple Edits to enter ripple editing mode 2 Click the event to be cut or make a time selection To cut multiple events use the Ctrl key the Shift key or the Selection tool to select the events For more information see Selecting multiple events on page 44 3 Click the Cut button H on the toolbar to cut the event s to the clipboard The cut events and their time information
276. file that is longer than thirty seconds to a project the Beatmapper Wizard starts allowing you to add tempo information to the file As a result these clips respond to tempo and key changes just like loops For more information see Using the Beatmapper on page 114 Tip You can change the length of the file that starts the Beatmapper in the Audio tab of the Preferences dialog For more information see Using the Audio tab on page 230 MIDI A MIDI clip is automatically created when you open a MID SMF or RMI file You can use MIDI clips to record data from and play back through synthesizers and other MIDI compliant equipment For more information see Working with MIDI on page 163 Folder tracks Folder tracks can contain any combination of tracks Use folder tracks to group related tracks or sections of a project so they can be easily expanded or minimized For example if you have many drum tracks in your project you can add a folder track to consolidate drum tracks and minimize their vertical space in the track list When the folder track is minimized you can also perform edit operations on clustered events in the group but you cannot create events with the Draw or Paint tools or perform edge trimming Expand the folder track to edit individual events For more information see Using folder tracks on page 124 Adding and editing events You have added media to the project and tracks have been created for the media files Now you can a
277. formation about tagging media see Tagging media files on page 77 For information about adding custom columns to the Search Results pane see Adding custom columns on page 86 b Select the Use file and folder names to apply tags automatically check box if you want to automatically tag files based on the file path For example when this check box is selected a loop saved in the d loops drums hi hats folder would have the tags Drums and Hi Hats applied when it is added to the library Some synonyms and variant spellings will be resolved automatically If you need to modify the pattern matching you can edit the AutoTagPatterns xml file which is created in your My Documents Sony Media Libraries folder the first time the application starts 7 Click the OK button to close the dialog USING THE MEDIA MANAGER 87 88 Chapter 4 Chapter 5 Working in the Track View This chapter introduces you to several ACID features that increase your productivity such as markers regions and snapping options You ll also learn about the different ways to change a project s tempo key and time signature Finally you ll learn several options for adjusting the project timeline Using project markers and regions ACID markers and regions identify areas of your project and provide navigational cues for quickly finding those areas After you insert markers and regions you may adjust their position along the project s timeline and label them with mean
278. formation that identifies and describes the project Universal Product Code Media Enter the Universal Product Code UPC and the Media Catalog Number MCN Catalog Number to be written to your CD for identification purposes Start all new projects with these Select this check box if your projects requirements do not change or you want settings consistent settings for future projects Using the Audio tab This tab allows you to set different characteristics the project uses to handle the audio Item Description Master bus mode Choose either Stereo for a standard audio project or 5 1 Surround for a surround project Number of additional stereo Enter the number of stereo busses that you want in your project You may add up to 26 busses busses The busses appear in the Mixer window For more information see Using busses on page 141 Sample rate Choose a sample rate from the drop down list or enter your own rate The sample rate range is 2 000 Hz to 192 000 Hz Higher sample rates result in better quality sound but also mean larger audio files Bit depth Choose a bit depth from the drop down list A higher bit depth results in better quality sound but also means larger audio files Enable low pass filter on LFE Select this check box to limit the audio sent to the LFE channel in a 5 1 surround project For more information see Working with 5 1 Surround on page 209 GETTING STARTED 35 36 Chapter 2 Item Description Cutoff fre
279. from the View menu or by pressing Ctrl Alt 2 The upper half of the Groove Pool window shows all of the groove maps currently in your project The lower half of the window displays the selected groove map in the Groove Editor which allows you to make changes For more information see Working with grooves on page 120 Clip properties For audio non MIDI clips this window allows the user to change clip types loop one shot and Beatmapped and adjust time stretching pitch root notes tempo and downbeat For more information see Configuring clip properties on page 115 For MIDI clips you can use the Clip Properties window to edit data using the OPT list editor or piano roll For more information see Using the piano roll editor on page 187 For more information see Using the list editor on page 191 Keyboard command reference The ACID keyboard commands are shortcuts that you can use while working on your project Important Some keyboard commands listed below are associated with features that are not available in all versions of ACID For information on a specific feature and its availability please refer to the description of the feature in this manual General commands Description Keys Display online help F1 Display What sThis help Shift F1 and click an item Refresh screen F5 Shortcut menu Shift F10 Temporarily suspend snapping Shift drag Project file commands Description Keys Description Keys Create new project C
280. g mode or the keyboard in the Soft Synth Properties window Note Not all VSTi plug ins can record using the keyboard in the Soft Synth Properties window Select the Arm for Record buttons on the tracks where you want to record Arming a track enables it for recording If you don t arm a track for recording a new MIDI track will be created when you click the MIDI Step Record button Choose a MIDI input device and channel for each armed track For more information see Setting up a MIDI controller for recording into a track on page 164 If you re recording using the keyboard in the track view or the Soft Synth Properties window choose Auto Input Click the MIDI Input button on the track header and choose Send MIDI Input Thru to MIDI Output from the menu if you want to echo notes from the MIDI controller to the track s MIDI device or soft synth for monitoring Set up any desired MIDI message velocity or quantize filters for your armed tracks For more information see Configuring MIDI input filters on page 179 Position the cursor where you want to start recording Click the MIDI Step Record button Step size J 24576 ticks C Tuplet in time of Duration fi 7 S 12288 ticks Velocity As Played Use the MIDI Step Record dialog to set options for recorded MIDI notes a Click the Step size button and choose interval between the beginnings of notes Select the Tuplet check box to set irregular intervals For ex
281. g the existing event To avoid pasting over existing events you have two options e Use the Paste Insert command For more information see Using Paste Insert on page 62 e Turn on ripple editing For more information see Ripple editing on page 67 When events are cut copied to the clipboard and subsequently pasted into a project the time data inherent in the cut copied events is maintained and pasted For example if you select two events on the same track that are separated by five seconds of silence copying and pasting these events results in the five seconds of silence also being pasted into the project ne Original events Pasted events Taking this concept a step further if you select discontinuous events from several tracks copying and pasting these events results in any selected time data being pasted into the project as well This maintains the relative position of events in the project Original events Pasted events Note You can also paste events across tracks using clips For more information see Copying clips and events across tracks on page 108 Using the Paste command 1 Place the cursor at the desired position on the timeline 2 Paste the clipboard contents using any of the following methods EDITING EVENTS 61 62 Chapter 3 e Click the Paste button E on the toolbar e Choose Paste from the Edit menu e Right click the track view and choose Paste from the shortcut menu e Press Ctrl V Using
282. g using the V Pot in the channel section In 5 1 surround projects pressing the Pan button toggles left to right panning front to rear panning and center channel level adjustment using the V Pot 4 Sends Press to adjust bus and assignable effects send levels Press the Sends button to scroll through the available busses and assignable effects chains and then turn the V Pot to adjust the send level APPENDIX B 247 248 APPENDIX B Item 5 Inserts 6 Settings Description Press to adjust effects settings Press the button once to display PL in the Mackie Control Assignment display The Mackie Control LCD displays the effects that are assigned to each track or bus The following example shows a three track project Audi Aud2 Aud3 Master TrNsGt TrcCmp TrcEQ None Turn the V Pot to scroll through the effects and press the V Pot to edit the current effect In editing mode PE is displayed in the Assignment display The following example shows the settings for the Noise Gate plug in on track one ThrLvl AttTim RlsTim Bypass ud1 Track Noise Gate 80 0 2 90 100 0 Falsel 171 Noise gate 1 PE mode uses the following controls e V Pots 1 4 Turn to edit the effect s parameters For switch parameters such as Bypass press the V Pot to change the setting e V Pot 5 Turn to scroll through an effect s property pages e V Pot 6 Turn to choose from a plug in s available presets Press the V Pot to choose a preset
283. ga cone n User defined surface control mappings Mackie Button Modifiers Host Function Fook Switch 4 Transport TogglePlay Foot Switch amp Shift Fook Switch B Transport Rec Foot Switch B Shift PLAY Transport Pause PLAY Shift Trackview CursorPreview PLAY RECORD Transport Rec TrackViews Track Pender Toke Available host Functions Function Current Mapping Project Wew Unassigned Project MewQuick Unassigned Project Save Save Project Saveas Unassigned Project Load Unassigned Project Redo Shift Undo Project Undo Unda Project UndoAll Unassigned Proiect Clear IndaHiskorwe 1 nassiaonerd 4 To add or change a function do the following a Select an item in the User defined surface control mappings list b Select an item in the Available host functions list c Click the Assign button 5 To remove a function select an item in the User defined surface control mappings list and click the Clear button 6 Toremove all functions click the Clear All button 7 To replace all custom functions with the default settings click the Default All button Important The Mackie Control Universal can control either trim or automation settings In order to control automation settings the Automation button in the Audio Video section must be selected and the track or bus you want to edit must be set to Automation Write Touch or Automation Write Latch Hold the F1 button while turning the V Pot or use the Auto
284. grows more curved and smooth 1 Double click a keyframe The Surround Panner window appears Surround Panner jal Electric Guitar 03 Automation aE Fg w Add Channels 0 dB Center LD Center I 33 1 dE Smoothness 100 g Smoothness slider 2 Drag the Smoothness slider to adjust the smoothness of the spatial interpolation path leading up to this keyframe Three keyframes with and the same three keyframes with smoothness 0 smoothness 100 Pa Gy ek Pa Gy wr SSS SSeS ee See te See epee ee se eS a 69 29665 9 6 SS Se Se Se eS Se Se ee ee ees eeees Locking keyframes to events If you want keyframes to move with an event when it is moved along the timeline choose Lock Envelopes to Events from the Options menu Hiding keyframes 1 Select the track for which you want to hide keyframes 2 From the View menu choose Show Envelopes and choose Surround Pan Keyframes from the submenu Deleting keyframes Right click a keyframe and choose Delete from the shortcut menu WORKING WITH 5 1 SURROUND 219 220 Chapter 13 Rendering surround projects 5 1 surround projects are rendered to produce six monaural files WAV or AIFF You can then use an authoring application to create the final cinema DVD Audio DVD Video or DTS 5 1 Music project from the rendered files With the addition of the Sony 5 1 Surround Plug In Pack you can render AC 3 files and burn the resulting files to DVD
285. h control icon 4 to display the Soft Synth Properties window where you can view the device s MIDI ports start or close the application or lock MIDI ports Click the Open ReWire Device Application button E to start the device some synths cannot be started by a ReWire mixer application When your re finished editing in the ReWire device application you can click this button again to close the ReWire application Select the Lock MIDI Port Configuration button Na to lock MIDI ports so your ACID project does not lose port assignments due to dynamic changes from ReWire devices Using ACID as a ReWire device When ACID is used as a ReWire device the output from your ACID mixer is output to a ReWire mixer application After you add the ACID synth to a ReWire mixer application the mixer application sends song position data to the ACID synth which sends its audio back to the ReWire mixer Because ACID supports ReWire 1 0 MIDI data is not sent to the mixer MIDI tracks are output as audio data through soft synths Important notes e You must start your ReWire mixer application before starting ACID e When ACID is connected to a ReWire mixer application the ACID project will automatically use the mixer application s bit depth and sample rate Saving the ACID project in ReWire mode will not overwrite the project s original bit depth and sample rate e Ifa ReWire mixer application starts ACID that ACID window will start in ReWire mode
286. hange bus or hardware routing e Mute solo bus or control e Delete bus or control e Change fader level You can select multiple nonadjacent controls by holding the Ctrl key while clicking each control s name You can select multiple adjacent controls by clicking the first control and holding the Shift key while clicking the last control in the range Note You cannot group the Preview fader in this manner with other mixer controls Automating mixer controls in track view You can automate bus assignable effect and soft synth controls in track view You can view each of these controls on tracks at the bottom of track view and to add envelopes to automate functions such as volume pan and assignable effect chain input output levels You can also add envelopes to automate effect parameters for plug ins that support automation For more information see Track automation on page 127 For creative ways to use bus automation see Fading in and out of mixes on page 263 Viewing bus tracks From the View menu choose Show Bus Tracks or press B The bus tracks appear at the bottom of the track view A bus track appears for each mixer control in your project Adding track envelopes Right click the track header in the track list choose Insert Remove Envelope from the shortcut menu and choose the appropriate envelope type from the submenu You can identify which mixer controls have envelopes by looking at each control s letter or number An automate
287. hanges the name of a selected file Delete All removes all files in dialog Show after every recording session Done returns to track view When a check mark appears in this box ACID software displays this dialog after each recording session Recording into a time selection By making a time selection you specify where along the timeline to record The time selection also determines how long the software records Any selected events that occur within the time cassc 1 ae OQ Side i E selection are split and the recorded data is placed into the time maoe a Ta selection 00 00 04 000 3 1 000 rr 1 1 Sinil Recorded waveform The event s waveform is displayed as it is recorded and automatically stops recording when the cursor reaches the end of the time selection Recording into an event By recording into an event you automatically create a new clip containing the recorded material that is the same duration as the selected event The edges of the selected event serve as the punch in and out points that are used for recording Recording into an event allows you to establish a pre roll before recording which gives you time to prepare before recording starts Because the entire recording is saved to the media file not just the material between the edges of the take you are not limited to the recorded material contained in the length of the new clip You can adjust the edges of the event or slip th
288. he VST instruments you want available in ACID 7 Click OK to close the Preferences dialog Note Once you add a VSTi soft synth to a project the VST instrument stays locked until you close the application When a VST instrument is locked you cannot clear its check box to make it unavailable in ACID Configuring a soft synth for external input Each soft synth bus control in the Mixer window can accept input from MIDI tracks and external MIDI devices You can use your favorite controller to play a DLS soft synth or VST instrument for recording or step recording 1 Double click a soft synth icon on a control 2 in the Mixer window The Soft Synth Properties window is displayed 2 Click the External MIDI Input Port button IE and choose a port from the menu If the port you want to use isn t displayed choose External MIDI Device Preferences from the menu The MIDI tab in the Preferences dialog is displayed so you can select a port in the Make these devices available for MIDI input section of the dialog Note This step is necessary only if the Auto MIDI input routing check box on the MIDI tab of the Preferences dialog is not selected 3 If you re using a VSTi soft synth select the Enable button T on the Soft Synth Properties window to allow real time MIDI playback Soloing external MIDI inputs Your external MIDI devices can be routed to multiple soft synth bus controls and MIDI thru devices Soloing an external input prevents you
289. he clip media is divided into sections that are crossfaded and some sections may be looped if necessary to achieve the necessary length Choose Nonlooping segments for sustaining material such as synthesizer pads and held notes The clip media is divided into sections that are crossfaded but no sections are looped Choose Pitch shift segments to shift the pitch of the clip to adjust for increases or decreases in tempo Using this option you can eliminate some of the problems that occur with extreme tempo changes just create new sounds from existing loops For example if you have slowed the project tempo down and hear echo artifacts choosing Pitch shift segments can eliminate these artifacts Choose Sliced segments for material such as drum loops where silence exists between notes Instead of crossfading the segments silence is added between beats to reduce warbling or other artifacts When you set the stretching method to Sliced segments beat markers represent divisions in the clip media where silence will be inserted to accomplish stretching Stretch only markers are not used in this mode and are displayed in gray You can adjust stretching properties creatively For more information see Overriding compress expand on page 265 Type a value in the box or use the spinner control to adjust the sensitivity for beat detection Higher settings increase sensitivity and lower settings decrease sensitivity When you set the control to 100 bea
290. he clipboard it can be pasted back into the project an unlimited number of times Clipboard content remains on the clipboard until it is replaced by new data 1 Select the event data you want to cut or make a time selection For more information see Making selections on page 44 2 Cut the event data using any of the following methods e Click the Cut button H on the toolbar e Choose Cut from the Edit menu e Right click the selection and choose Cut from the shortcut menu e Press Ctrl X All selected events are removed from the track view and placed on the clipboard Deleting events Deleting an event a time selection or an event within a time selection removes the data from the track view and discards it Deleted events are not placed on the clipboard and do not replace or interfere with current clipboard content In addition deleted events cannot be pasted back into a project Note Deleted data can only be replaced in a project using the Undo command For more information see Using undo on page 49 1 Select the event data you want to delete or make a time selection For more information see Making selections on page 44 2 Delete the event data using any of the following methods e Choose Delete from the Edit menu e Right click the selected event and choose Delete from the shortcut menu e Press Delete All selected events are removed from the track view and discarded Tip To remove the unused media from
291. he shortcut menu or select the control and press Delete The assignable effect control is removed from the Mixer window Using soft synth controls You can add soft synth bus controls in the mixer to control the routing of your MIDI tracks to software synthesizers Soft synth controls allow you to control volume and voice mappings for your MIDI tracks and add effects to a software synthesizer In the same way you can route a MIDI keyboard to an outboard synthesizer module you can route each MIDI track to any soft synth control you have set up for your project Tip You can also use soft synth controls to play MIDI from an external device For more information see Playing MIDI from external devices on page 197 There are three types of soft synth bus controls you can add DLS Downloadable Sounds VSTi or ReWire devices A DLS or VSTi soft synth bus control is like a virtual synthesizer module where you can route tracks In the same way you can route a MIDI keyboard to an outboard synthesizer module you can route each MIDI track to any soft synth you have set up for your project or play a soft synth with an external MIDI controller A ReWire soft synth bus control connects a ReWire device application with ACID which serves as a ReWire mixer application When ACID hosts a ReWire device application playback is synchronized between the two programs and the panel application s audio is output through the ACID mixer With ReWire 2 0 panel ap
292. he transport to the proper location However full frame messages are ignored by some devices and may actually cause unexpected behavior in other devices Refer to your hardware documentation to find out if your hardware supports full frame messages MTC Input Send Start instead of Continue Select this check box if you want a Start command rather than a Continue when beginning playback command to be sent when Generate MIDI Clock is activated When the check box is cleared a Continue command is sent as this type of command allows the chasing device to start from a specific time However some older sequencers that support MIDI Clock chase do not support the Continue command and must start playback from the beginning every time Song Position Pointer generation Selecta radio button to determine when Song Position Pointer messages are sent while Generate MIDI Clock is active Song Position Pointer messages are used by MIDI applications and devices to seek to a proper location prior to starting synchronization APPENDIX A 237 238 APPENDIX A Using the Display tab Item Track colors Envelope colors Icon color saturation Icon color tint Using the Other tab Item Enable multiple selection preview in Explorer window Using the Folders tab Item Default project folder Default groove folder Use a single default folder for project media saves Use separate defaults for each type of project media save D
293. herwise drag the region markers to the appropriate locations and click Next The waveform appears with measure lengths selected 5 Drag the Measure slider to scroll through the song and click the Play button E to verify each measure s length If the song s tempo is consistent the measures are placed correctly If the tempo fluctuates you can drag the end of the measure selection to change the measure s position Changing the measure length affects the entire song if adjusting the last measure of the song causes the first measure to be incorrect the downbeat may not be positioned correctly or the song s tempo may not be consistent enough for the Beatmapper 6 Click Next when the measure lengths are correct The Beatmapper adds tempo information to your file and displays some additional options 7 Specify your preferences for the following options e Select the Change project tempo to match Beatmapped track check box if you want to set your project tempo to match the tempo calculated by the Beatmapper Wizard Selecting the check box ensures that your Beatmapped track plays at the original tempo e Select the Preserve pitch of the Beatmapped track when tempo changes check box to maintain the track s original pitch regardless of the project s tempo e Select the Save Beatmapper information with file check box if you want the file to open with the Beatmapper settings each time you use the file 8 Click Finish to close the
294. hide a volume envelope or P to hide a panning envelope Press the key again to display the envelope Hiding effect automation envelopes on a track To hide effect parameter envelopes click the arrow adjacent to the Track FX button and choose Hide All FX Automation Envelopes from the menu To display envelopes again click the arrow adjacent to the Track FX button H and choose Show All FX Automation Envelopes from the menu Tip Press E to toggle through the display of all effect parameter automation envelopes Removing track envelopes You can remove envelopes from tracks quickly and easily Note When you remove an envelope from a track and then add it again you must recreate its envelope points Removing volume pan bus or assignable effect envelopes 1 Select the track s from which you want to remove the envelope s USING AUTOMATION 135 136 Chapter 8 2 From the Insert menu choose Envelopes A submenu appears showing a check mark next to the envelopes being used 3 From the submenu choose the type of envelope you want to remove The envelope type is removed from the selected track s Tip Press Shift V to remove a volume envelope or press Shift P to remove a pan envelope Deleting MIDI controller envelopes Click the down arrow next to the Insert Hide Envelope button 7 next to the controller s slider in the track header and choose Delete Envelope If you want to show or hide an envelope without deleting
295. hift displays on the event itself You can also change an event s key using keyboard shortcuts For more information see Event editing commands on page 26 98 Chapter 5 Adjusting time Two commands are provided for adjusting your project s timeline Insert Time and Fit to Time Inserting time Use the Insert Time command to insert a specified amount of blank space into the project at the current cursor position This feature can be used to create space in the project for new events 1 Position the cursor where you want to insert time 2 From the Insert menu choose Time The Insert Time dialog appears 3 Enter the amount of time you want to insert and click OK Note The Insert Time dialog uses the measures beats ticks format used by the beat ruler Fitting to time The Fit to Time command allows you to adjust the project s overall length to a specified amount of time Note The maximum and minimum length is limited to reduce the possibility of creating audible artifacts through the compression expansion process 1 From the Edit menu choose Fit to Time The Fit to Time dialog appears with the current project length displayed in the New length box 2 Enter the new project length in the New length box The length is always entered in time format regardless of the format used on the time ruler 3 Click OK The dialog closes and the tempo is adjusted to alter the project s length WORKING IN THE TRACK VIEW 99 1
296. his occurs simply set the stretching properties again and click the Save File button E Note The Stretch tab for Beatmapped clips is essentially the Beatmapper without the wizard Stretching properties for loop files The following table describes the settings on the Stretch tab for loop files Item Root note Number of beats Stretching method Transient sensitivity Timing tightness Stretch spacing Redetect Beats Description Choose a note from the drop down list to set the base note for loops that you want to conform to the project key If you do not want a clip transposed to the project key a clip that contains a drum sample for example choose Don t transpose Choose a setting from the drop down list to specify the length of the original file Selecting a value that does not match the actual file causes the loop to play at a different speed For example specifying a length of 8 beats for a 4 beat loop causes the loop to play at half speed at any given tempo You can misinform the software regarding the beat length of a loop for creative ends For more information see Playing double time half time on page 263 Stretching properties determine how time compression and expansion is performed on audio events If you hear audio anomalies due to time compression try editing the stretching properties of the track Looping segments is the default stretching method and it works well with most types of material T
297. his radio button and drag the slider to multiply selected note durations by a percentage For example setting this slider to 200 would double note durations Select the Change start times check box if you want to change the start times of notes while changing duration For example if you set the Scale by slider to 50 and select the Change start times check box you can compress notes so they play in double time If you set the Scale by slider to 50 and clear the Change start times check box note durations will be shorter but their positions on the timeline will not change WORKING WITH MIDI 175 176 Chapter 11 Limit Select this radio button and choose Min and Max values to restrict note durations to the specified range For example if you choose an eighth note as the Min setting and a half note as the Max setting sixteenth notes will be changed to eighth notes and whole notes will be changed to half notes Notes between the Min and Max settings are unaffected 4 Select the tracks or events you want to edit e Select a track to edit all events on the track Hold Ctrl or Shift while clicking a track header to select multiple tracks e Ifyou want to edit multiple events on multiple tracks hold Ctrl or Shift while clicking the events to select them and then select the tracks e Ifa selected event has note events selected only the selected notes will be edited Note Muted tracks will not be edited 5 Click the Apply bu
298. hoose Generate MIDI Clock from the submenu MIDI clock is generated when you click the Play button a Viewing outgoing MIDI clock You can view the outgoing clock in the time display located directly above the track list Right click the time display and choose MIDI Clock Out from the shortcut menu to display the outgoing MIDI clock time Exporting MIDI files By using the Clip Pool tab you can save the selected clip to a new folder or with a new file name When you export a MIDI file the MIDI tracks in your project are saved to a standard MIDI file Track names track device names and track voices are saved in the exported file Saving MIDI clips for export You may now export multiple MIDI tracks and individual clips to standard MIDI files To export files 1 Select Paint Clip Selector from the track header 2 Choose Clip Pool to open the Track Properties dialog box 3 Right click on the clip you want to save and select Save As 4 Name the file and choose Save Notes Files are saved in the MIDI Export folder but they can be saved to any location e Files are saved as standard MIDI files mid e All MIDI clips are exported as MIDI file type 0 The MIDI File Type box is greyed out e File resolution is set at 960 pulses per quarter note Resolution can be set between 24 and 960 pulses per quarter note All sequencers players can read in any arbitrary resolution Exporting the project to a standard MIDI file 1 From
299. ht button as desired to insert events to move through the track clicking the Insert Selection button Wlinsert Creating pseudo granular synthesis 1 Create a sixty fourth note or shorter selection in the Chopper 2 Click the Insert Selection button Wiser 3 Use the Shift Selection Left and Shift Selection Right buttons to move the selection randomly through the track clicking the Insert Selection button Insert to insert events Building instrument solos The previous section described an extended technique to create challenging rhythmic variations in your projects You can use a slightly different version of the slice and dice technique to build instrument solos for your projects To demonstrate this let s start with an event containing a simple bass riff 1 Slice and dice the file in the Chopper to create new riffs and add them to the project For more information see Using the Chopper on page 101 2 Use the pitch shifting to transpose some of the new events For more information see Changing an event s key on page 98 3 Apply volume envelopes to simulate the varying attacks associated with live soloing For more information see Adding volume or pan envelopes on page 128 4 Use tempo key time signature change markers to create passages with tempos that deviate from the project tempo For more information see Working with tempo key time signature change markers on page 97 Building s
300. ice The MTC slave should also be set to this device This device will not be available for MIDI playback Choose a frame rate from the drop down list This frame rate is used to generate the MIDI timecode The MTC slave must be set to the same frame rate Choose a MIDI device from the drop down list MIDI clock is sent to this device The MIDI clock slave should also be set to this device Trigger from MIDI Timecode settings Input device Frame rate Advanced Default All Setting advanced sync preferences MTC Input Free wheel for timecode loss Free wheel slack time Free wheel playback time Synchronization delay time Offset adjust MTC Output Full frame message generation MIDI Clock Output 236 APPENDIX A Choose a MIDI device from the drop down list MIDI timecode is received from this device The MTC master should also be set to this device Choose a frame rate from the drop down list This value specifies the frame rate at which the MTC master sends timecode to ACID Click to open the Advanced Sync Preferences dialog Restores all sync preferences to the default settings Select this check box if you want to continue to play if timecode is lost Enabling this option can compensate for infrequent losses in timecode If you frequently lose timecode you should perform troubleshooting to determine the cause of the problem Use the up and down arrows or enter a value in the box to specify the amount of
301. icking and dragging to create a selection box around the notes you want to edit Drag notes left or right to change their position on the timeline or drag up or down to assign a note to a different pitch Tips Hold Shift while dragging to override horizontal snapping press Shift after you click Hold Alt while dragging to constrain to horizontal or vertical movement WORKING WITH MIDI 171 172 Chapter 11 Editing note duration Click the Enable Inline MIDI Editing button 2 Select the Draw tool 4 Use the scroll buttons at the left edge of the track to navigate the piano roll drum grid Hold Shift while dragging to override horizontal snapping press Shift after you click Editing note velocity Note velocity is represented in the timeline by velocity stems To show or hide velocity stems in inline MIDI editing mode choose Show Inline MIDI Editing from the View menu and then choose Show Note On Velocities or Show Note Off Velocities from the submenu Free Fingers gt zz aS Click the Enable Inline MIDI Editing button fal Select the Draw tool A If velocity stems aren t already displayed choose Show Inline MIDI Editing from the View menu and then choose Show Note On Velocities or Show Note Off Velocities from the submenu Tips Press F while inline MIDI editing mode to toggle the display of velocity stems 4 Drag the top of the stem for note on velocity lt or for note off velocity
302. iew the entire MIDI file a loop selection or single notes using the piano roll editor Tip To control volume during playback in the piano roll editor drag the Preview fader in the Mixer window Previewing the MIDI file Use the transport bar buttons at the bottom of the piano roll editor to play your MIDI Tip You can use the Solo button _ to solo a particular MIDI track during preview playback Previewing a selection in looped playback You can preview a selection in looped playback just as you would in the main ACID window 1 Drag the handles of the loop bar in the piano roll editor to create the desired loop region 2 Click the Loop Playback button to turn on looped playback 3 Click the transport bar s Play button 5 or press Space The piano roll editor loops the playback of the selected area To stop playback click the transport bar s Stop button or press Space Adding note events You can add note events using the Draw tool l or the Paint tool FI in the same way you do in the main ACID window Tip As you drag to create new events the event edge snaps to the divisions on the beat ruler To snap to smaller divisions click the Zoom In Time button at the bottom of the window to zoom in more tightly Or to turn off snapping altogether click the Enable Snapping button l to toggle it off Drawing note events The Draw tool limits you to drawing one pitch at a time In other words you canno
303. if you want to search folders within the selected folders 5 Select the Audio Video Images or MIDI check boxes to indicate the types of media you want to add Clear a check box to exclude that type of media file Files that contain audio and video streams will be added if either or both of the Audio or Video check boxes are selected 6 Specify whether you want to search for new files or all files Select the New files only radio button if you want to search only for new media files Files that already exist in the media library will be skipped Select the All files radio button if you want to search for all media files in the specified folder New media files will be added and files that already exist in the media library will be searched to determine whether their properties have changed 7 Select the Add tags and custom properties from files check box if you want to add tags and custom columns saved in the media files to your library For more information about tagging media please see Tagging media files on page 77 For information about adding custom columns to the Search Results pane see Adding custom columns on page 86 8 Select the Use file and folder names to apply tags automatically check box if you want to automatically tag files based on the file path For example when this check box is selected a loop saved in the d loops drums hi hats folder would have the tags Drums and Hi Hats applied when it is added to the library Some sy
304. igate between regions in your project by pressing Ctrl left right arrow key or the number key not on the numeric keypad corresponding to the region number Selecting regions You may use the region s start and end tags to make a time selection across all tracks in your project The information within the time selection can then be used for playback or editing To select a region right click a region tag and choose Select Region from the shortcut menu The loop bar appears between the region tags and the tracks are highlighted Deleting regions You may remove regions from the project at any time Because regions are automatically numbered when they are placed the existing regions are not renumbered when one is removed Rather the existing regions retain their numbers However if you add regions later numbering begins to fill the sequence gap that exists For example if you have six regions in your project and delete regions four and five the remaining regions are listed as one two three and six When you add regions again the regions are numbered as four and five To remove a region from a project right click the region tag marker and choose Delete from the shortcut menu Using snapping Snapping helps you to align events in your project with other items Event edges are preset to snap to the project s grid lines as you drag an event along the track If snapping is enabled and the Grid Only option is turned off the event s edges aut
305. iginal level in the mix Toggle muting a track is an effective way of determining whether a track contributes to the overall sound of a project You can also press Z to mute a track or group of tracks Tip Press Ctrl and click the Mute button to mute only the selected track and restore any other muted tracks If the selected track is already muted press Ctrl and click the Mute button to restore all tracks 48 Chapter 2 Soloing tracks Located next to the Mute button the Solo button _ allows you isolate tracks in a project during playback When you click this button during playback the corresponding track remains audible and all other tracks are muted Clicking the Solo button a second time returns all tracks to their original levels in the mix Toggle soloing a track is an effective method of configuring and previewing isolated track effects against how they sound in the project You can also press X to solo a track or group of tracks Tip Press Ctrl and click the Solo button to solo only the selected track and restore any other soloed tracks If the selected track is already soloed press Ctrl and click the Solo button to restore all tracks Working with groups of tracks Select a group of tracks by holding the Ctrl key while you click the track header of the desired tracks Now you can adjust the volume panning track color and other track attributes simultaneously Using undo and redo You have unlimited undo and redo cap
306. igure Mackie Control Device type MEA aaa Mareen a Channel mapping Chan 1 8 w MIDI input 56 Audigy MIDI 10 6000 MIDI output 56 Audigy MIDI 10 6000 t 5 Choose the channels you want to control with the Mackie Control Extender a From the Device Type drop down list choose Mackie Control Extender b From the Channel Mapping drop down list choose the channels you want to adjust with the Mackie Control Extender Configure Mackie Control Scan MIDI input AudioFireg b MIDI output AudioFireg w 6 Repeat Step 5 for each Mackie Control Extender 7 Click OK to apply your changes and close the Configure Mackie Control dialog 8 Click OK to apply your changes and close the Preferences dialog Configuring or customizing control mappings Use the External Control amp Automation tab in the Preferences dialog to select the control surfaces you want to use and adjust their configuration Reminder When you customize your control mappings button functions may not match the labels on the overlay You can click the Default All button in the Configure Mackie Control dialog to restore the default settings 1 From the Options menu choose Preferences to display the Preferences dialog 2 Select the External Control amp Automation tab 3 Double click your Mackie Control in the Active control devices list to display the Configure Mackie Control dialog Configure Mackie Control Device type fetwa ietelg a
307. il cutar t H O 1 f 1Ro1__ vol 1 5dB Pan Center I v F Guitar Too ky 0O F vol 25 5d8 Pan Center 41 120 000 4 ll la 1 am 7 YA O PPHE KHH OF Did lt DIVIqer O Guitars vig gt E it BS Mixer 44 100 Hz 16 Bit Ex pd d o GM Insert Soft Synth H Amb A Acoustic Classic G Pushing Riff 04 shift Delay 03 f Preview D Master TMDLS Soft Synth f H Dan Backwards Swell Pushing Riff 05 E shift Delay 04 EE o RAON tO H Elect Dreamer Pushing Riff 06 Shift Delay 05 Inf Inf Hip G Fuzz wah G Pushing Riff 07 E shift Delay 06 i n S Rock GS Heavy Riff a Pushing Riff 08 El shift Delay 07 A Center Ot Hyperfuzz 01 Pushing Riff 09 Shift Delay 91 Inf Inf lG Hyperfuzz 02 Pushing Riff 10 Slide Feedback 12 B pe Window o Hyperfuzz 03 Riffing In Five 01 Slide Feedback 15 dockin G Hyperfuzz 04 Riffing In Five 02 Slide Feedback Ea 12 g as Hyperfuzz 05 Riffing In Five 03 Slinky J H The 24 18 area ES Mick Flee Lotsa Wah G Riffing In Five 04 G wildflowers 27 1 H Premium Movin Acoustic 01 Riffing In Five 05 30 7 24 E Songs Movin Acoustic 02 Scooped Mids 01 ia 730 7 H Standar Pushing Riff 01 Scooped Mids 02 39 36 MIDI G Pushing Riff 02 shift Delay 01 42 Odd Time Pr Pushing Riff 03 G shift Delay 02 s 2 48 7 H Product Info C i gt ead 48 O Stereo Proje
308. ime signature Click the Project Time Signature control and select a time signature from the menu to adjust a project s time signature Select Other from the menu to enter a custom time signature Changing project key Click the Project Key control and select a key from the menu to adjust a project s key 107 614 4 m y BPM a oA Mone C E y Project Key control ela This feature makes it possible to use media that are in different keys in the same project each loop that has a specified root note is transposed to the key indicated by the Project Key control For example if three loops have root notes of A B and C and your Project Key control is set to D the loops are pitch shifted by five three and two semitones respectively Note f the root note for a track is set to Don t Transpose in the Clip Properties window the track does not pitch shift with the rest of the project Working with tempo key time signature change markers Tempo key time signature change markers allow you to make changes to the tempo key and or time signature at specified points in your project Note Time signature changes must occur on the first beat of a measure Adding tempo key time signature change markers 1 Position the cursor where you want the change to occur 2 From the Insert menu choose Tempo Key Time Signature Change The Tempo Key Time Signature Change dialog tempo key time signature change marker is encountered e
309. imulate live performance For more information see Using track automation envelopes on page 113 e Make the effects even more pronounced by setting a start offset within specific individual events For more information see Changing event properties on page 70 Adding through subtraction You can create dynamics by removing sections of events You can erase sections of events from a project by using the Erase E tool To demonstrate using subtractive arranging add three or four similar drum loops to a project Use the Erase tool to delete specific sections of each event For example erase all snares from one track all basses from another high hats from the third and so on This results in a tighter more realistic drum sound for your project Experiment with taking this technique a step further and randomly remove sections from each track When doing this remember to keep at least one of the drum tracks playing at all times unless you want the drums to completely drop out of the mix Randomly removing sections of events adds realism to your projects by approximating how a drummer plays with slight variations throughout a song Tweaking the dynamics You can use several techniques to adjust the dynamics of your mix Fading in and out of mixes With bus tracks you can use a volume envelope to fade in and out of the entire project 1 Press B to view bus tracks For more information see Automating mixer controls in track view on page 1
310. in the track bus control can function as trim controls that adjust the overall level of each channel or you can automate the master volume of the Surround Master bus individual channel levels cannot be automated Deselect the Automation Settings button in the bus control or bus track if you want to adjust trim levels Mixer Center 118 Mixer controls header in trim mode Select the Automation Settings button if you want to adjust volume automation The fader handle is displayed as a in automation mode Mixer 44 100 Hz 16 Bit Em Tel d4 GQ Insert FX GP Insert Bus 9 Insert Soft Synth i a Bus 4 i Pipe Organ ses ae E S 1 El lg Front Rear PES 116 116 116 116 s Inf Mixer controls header in automation mode Panning audio You can pan audio in a 5 1 surround project in two ways e Pan tracks individually using the Surround Panner window e Route tracks to mixer controls busses assignable effect chains or soft synths and pan the mixer controls using the Surround Panner window Note You cannot pan audio on tracks or busses that are routed to hardware outputs in a 5 1 surround project Panning tracks 1 Deselect the Automation Settings button on the track you want to pan 2 Double click the surround panner on the track you wish to pan The Surround Panner window appears BM
311. in the track header Click the Automation Settings button and choose Automation Write Touch from the menu The icon in the track header is displayed as a x Click to position the cursor in the timeline and click the Play button I to start playback When you re ready to start editing adjust the control that corresponds to the envelope point or keyframe you want to adjust Envelope points keyframes are updated at the cursor position and when you stop adjusting the control the original settings are preserved Click Stop Li to end playback and stop recording automation USING AUTOMATION 137 138 Chapter 8 Overwriting recorded settings in Latch mode In Latch mode envelope points or keyframes are created when you change a control setting and recording continues until you stop playback When you stop adjusting the control the control s current setting overwrites the existing envelope points keyframes Use Latch mode to overwrite automation settings with new values 1 2 Select the Automation Settings button in the track header Click the Automation Settings button t and choose Automation Write Latch from the menu The icon in the track header is displayed as a i Click to position the cursor in the timeline and click the Play button to start playback When you re ready to start editing adjust the control that corresponds to the envelope point or keyframe you want to adjust Envelope points keyframes are
312. ine tune mixes and effects while continually listening to the selected area For more information see Transport bar on page 21 1 Drag the handles of the loop bar to create the desired loop region Click the Loop Playback button toturnon looped playback Click the transport bar s Play button E or press Space Playback of the selected area begins To stop playback click the transport bar s Stop button or press Space Bypassing audio effects during playback If you want to hear your project without your applied audio effects track bus and assignable effects you can quickly bypass these effects during playback From the Options menu choose Bypass All Audio FX This option can also conserve processing power to avoid playback problems Note When effects are bypassed you can choose whether bypassed effects remain open When the Keep bypassed FX running check box on the General tab of the Preferences dialog is selected effects remain open so you can bypass enable effects with no pause for A B testing When the check box is cleared effects are fully bypassed conserving processing power Using the Mixer window The Mixer window is a dockable window with a default location in the lower right corner of the ACID workspace The Mixer window contains the following controls e A Preview fader which allows you to adjust the loudness of media files previewed from the Explorer window Track Properties window Beatmapper or the Chop
313. ing multiple tracks to a single track on page 125 The new composite loop is saved and adds it to your project as a new track Creating drum roll build ups Place a file in the Chopper For more information see Placing files in the Chopper on page 102 Create a one measure selection For more information see Creating selections of a specific musical length on page 103 Click the Insert Selection button linser once The selection is pasted to the track view Click the Halve Selection button This decreases the selected portion of the waveform by half Click Insert Selection button klinser twice Click the Halve Selection button ee ae eS eS Continue to double the number of inserts after each halving of the selection until you achieve the desired drum roll effect Creating drum fills 1 Place a file in the Chopper 2 Create an eighth note or other length selection of a drum track in the Chopper 3 Click the Insert Selection button insert 4 Use the Shift Selection Left and Shift Selection Right buttons to move the selection randomly through the drum track clicking the Insert Selection button jst insert to insert drum hits Creating one track remixes 1 Place a Beatmapped track in the Chopper For more information see Using the Beatmapper on page 114 2 Create a selection in the Chopper 3 Click the Insert Selection button insert twice 4 Use the Shift Selection Rig
314. ing the write operation renders the CD unusable Disc at once DAO CD burning The DAO burning process involves arranging your media on the timeline adding pauses between tracks as necessary inserting track markers and burning your CD Adding pauses Each CD track in your project should have a two second pause following it This default setting is based on the Red Book specification for audio CDs The exception to this standard is a continuous recording such as a live concert CD Fora continuous recording you can omit the pauses after tracks for continuous playback You can manually insert silence between your audio files to create a pause Note The Red Book specification also requires a two second pause at the beginning of an audio CD This pause is automatically added when you burn your CD Position your audio files on the timeline in the order in which you want them to play on your CD Position the cursor where you want to insert the pause between files From the Insert menu choose Time The Insert Time dialog appears So E Enter two seconds in the Amount of time to insert box 5 Click OK Two seconds are inserted in the timeline at the cursor position Inserting CD track markers You can use CD track markers in your project to indicate to the CD R device where to mark the beginning and ending of a track during the writing process A Red Book CD can contain up to 99 tracks 1 Position your audio files and add pauses between th
315. ingful names for your reference Marker type Description Marker standard ET he ik a maker PLU This is a marker Markers identify specific reference points in your project Points that you may want to identify are introductions bridges refrains choruses or whatever you choose Time marker ra a Time markers are fixed to the time ruler and mark absolute time in your area project They are very useful when scoring video 9 1 Command marker TEXT This is command maker Command markers indicate when an instruction or function occurs in a streaming media file a rrr Regions Regions subdivide your project into time segments Regions have in and out EJ This is a region marker 3 points which allow them to function as permanent time selections Working with standard markers Markers are tools that can make creating music easier by identifying specific points along the project s timeline They can be named moved and serve as snap and navigational points for the cursor and events When you place markers they are automatically numbered up to 99 in the order that you place them Placing markers Markers are placed at the cursor position You may place a marker in one of the following ways From the Insert menu choose Marker e Right click the marker bar choose Markers Regions from the shortcut menu and choose Insert Marker from the submenu e Press M You may use this method to place a marker while the pro
316. ins When you add multiple plug ins you may set the processing sequence that the track s events go through when the project is played back Moreover the plug ins that you add to the chain may be added more than once For example a plug in chain could look something like this Track EQ Track Compressor Track EQ and Track Noise Gate After you create a plug in chain the track s events are processed by each plug in in its respective order on the chain The events effects processing is cumulative so in some cases you may want to rearrange the order of plug ins to achieve the desired sound For more information see Arranging plug in chain order on page 112 1 Click the Track FX button 8 The Audio Plug In window appears 2 Click the Edit Chain button EF to display the Plug In Chooser dialog Chain area Plug In Chooser i Audio Fx Amplitude Modulation P Track EQ cS Al ifi Track Noise Gate 5 Automatable istorti Pfi vibrato gt Packaged Chains i gt Sony Cy Third Party 5 Track Optimized ST ity Gapper Snipper eH Graphic Dynamics Hts Graphic EQ Pi Multi Band Dynamics ie Multi Tap Delay His Moise Gate Hy Paragraphic EQ ii Parametric EQ Ay Pitch Shift ffi Resonant Filter fPiReverb ih Simple Delay ih Smooth Enhance Hs Time Stretch Hi Track Compressor 3 Select the plug ins that you want to add There are three ways to add a plug in to the chain e Double click the plug in e
317. ins equal to the length of the selection When toggled off you can configure the increment independently of the Chopper selection Halves the length of the Chopper selection Doubles the length of the Chopper selection Shifts the Chopper selection to the left by the length of the selection Shifts the Chopper selection to the right by the length of the selection Shifts the selection left by the increment length Shifts the selection right by the increment length Doubles the length of the increment arrow Halves the length of the increment arrow Inserts a region Inserts a marker Marks the start point of a loop region Marks the end point of a loop region Once the endpoint is established the loop region becomes highlighted Inserting markers and regions in the Chopper When working with events in the Chopper you can drop markers and create regions just like in the track view For more information see Using project markers and regions on page 89 These markers and regions are saved with the project when it is saved They can also be saved back to the original media file by clicking the Save File button q in the Track Properties window For more information see Saving file properties on page 120 Creating selections in the Chopper After you place a file in the Chopper you can use the toolbar transport bar and mouse or their keyboard equivalents to create and preview selections within the file When have made the s
318. ion The difference is that DSP chips are optimized specifically for mathematical functions while your computer s microprocessor is not This results in a difference in processing speed A set of Application Program Interfaces designed by Microsoft for multimedia development A DirectX plug in such as the Sony Noise Reduction DirectX Plug In uses the DirectX Media Streaming Services DMSS API Because DMSS is a standard API a DirectX plug in can be used in any application that supports DMSS This term is used in the Beatmapper to refer to the first beat of the first measure A DLS file stores a custom sound set that you can load into your soft synth giving you another set of voices for MIDI playback A quick way to perform certain operations using the mouse To drag and drop you click and hold an item drag it hold the left mouse button down and move the mouse and drop it let go of the mouse button at another position on the screen The difference between the maximum and minimum signal levels It can refer to a musical performance high volume vs low volume signals or to electrical equipment peak level before distortion vs noise floor For example orchestral music has a wide dynamic range while thrash metal has a very small always loud range Envelopes allow you to automate the change of a certain parameter over time In the case of volume you can create a fade out which requires a change over time by adding an envelop
319. ion click the OK button to submit your data e Select the appropriate match from the list and click the Accept Match button The artist album and track information is displayed based on your selection in the right side of the PC pane 4 You re now ready to extract tracks Editing and submitting CD information 1 Insert a CD in your drive 2 Select a track and click the CD Info button in the Extract Audio from CD dialog or browse to the CD and click the button in the Explorer window The Gracenote CDDB Disc Information dialog is displayed For more information see Extracting media files from CD on page 38 For more information see Explorer window on page 22 3 Use the Gracenote CDDB Disc Information dialog to edit information about the CD For help on submitting CD information click the Help Guidelines button in this dialog 4 When you are finished entering the information click the OK button to submit it for inclusion in the Gracenote Media Database Downloading media files from the Web The Get Media from the Web command allows you to view and download various audio and video files available on the Internet 1 From the File menu choose Get Media from the Web Choose an icon from the left frame to specify the media provider from which you want to download files Preview the file select the file you want to open and click Download The Browse for Folder dialog appears Select a folder for the download The selected file is dow
320. ire cals F volk 6 0dB ii Pan Center Pre ou f Pose roll all in out Working with multiple recorded clips Clicking the Loop Playback button on the transport bar enables you to continually create clips during recording The last clip recorded is set as the track s active clip You can use clips as different versions of a recorded event that you can quickly switch between to choose the best one RECORDING AUDIO 159 160 CHAPTER 10 During recording with loop playback enabled the time selection continually repeats and starts recording a new clip until you stop recording You can preview select rename and delete clips in the Clip Pool pane of the Track Properties window to manage the clips For more information see Using the Clip Pool on page 109 The Clip Properties window will display region markers to represent the selected event s clip in the waveform For more information see Configuring clip properties on page 115 Specifying where recordings are stored Recorded files are saved in the folder specified on the Folders tab of the Preferences dialog is used by default If you want to choose a project specific recorded files folder you can use the Recorded files folder box on the Audio tab of the Project Properties dialog Changing where recorded files are stored for new projects 1 From the Options menu choose Preferences 2 Click the Folders tab 3 Choose a setting from the Record drop down list
321. irectly to the grid Increasing the setting shifts every other grid boundary forward set to 300 to shift every other grid boundary to the next grid division Strength Drag the slider to adjust how strictly you want to quantize For example to quantize directly to the grid set the slider to 100 If you set the slider to 50 a note that would be shifted 4 ticks is moved only 20 ticks Using the clip pool You can use the Clip Pool to organize each track s media and enable looped or one shot drawing for MID events Track Properties Stephanie Output Settings Input Filters Clip Pool BH xX amp amp gt Mame Used Loop Time Sig Length 4 Full of Tuts 1 G Mone 24 000 1 Select a track 2 From the View menu choose Track Properties The Track Properties dialog is displayed 3 Select the Clip Pool tab Tips You can also access the clip pool by doing the following e Double click the MIDI track icon to open Track Properties dialog Click the Clip Pool tab from the drop down menu e Click the Paint Clip Selector button and then choose Clip Pool For more information see Using the Clip Pool on page 109 Toggling looped or one shot painting for a MIDI clip Select the Loop button on the Clip Pool if you want a MIDI clip to repeat when painted on the timeline Loop clips are displayed with a 7 icon in the track list Deselect the Loop button if you want a MIDI clip to be treated as a one shot
322. is box After you add a VSTi soft synth to a project the VST instrument stays locked until you close the software When a VST instrument is locked the lock icon for that VSTi displays as locked and you cannot clear the VSTi s check box to make it unavailable in the software Description Select the ReWire client s that you want available for use as ACID soft synths Description Choose a DV output device from the drop down list This is the interface to which your video device is connected Displays information about the device selected in the External monitor device drop down list If your source media does not conform to DV standards choose a setting from the drop down list The video is adjusted to display properly on your external monitor If your audio is not synchronized with your external monitor you can configure an offset for your hardware Drag the slider to synchronize audio and video This setting affects synchronization for previewing on an external monitor Audio and video synchronization in your ACID project is unaffected Drag the slider to specify the number of frames it takes your camcorder or deck to switch from Record Pause to Record mode If you re missing frames from the beginning of your file after printing to tape increase the setting If you see duplicated frames at the beginning of your video decrease the setting Restores all video preferences to the default settings Description Use the up an
323. is mode is optimized for theater style soeaker placement In stereo projects Film mode functions identically to Constant Power As you drag the pan point to the center speaker the sound becomes diffused through the front and rear speakers When the track is panned fully to the center speaker there is no output from the front and rear speakers Dragging the pan point to the center of the surround panner sends the signal to all speakers Note f you re panning fully to a single speaker in Film mode you may notice that some signal is mixed to the opposite speaker This is because the ideal placement for surround speakers does not match the representation in the surround panner For example panning to the front left speaker produces a low level signal in the rear left speaker This is because your front left speaker should be positioned 30 left of center and the speaker in the surround panner is located 45 left of center To produce a true 45 left of center pan the signal is panned between the front and rear left speaker Using the grid to monitor panning The grid in the Surround Panner window helps you to visualize how your panning will sound The grid s spacing changes to match the current pan type The vertical lines represent the points where the left to right signal ratio is 6 dB 0 dB and 6 dB respectively at the far left line the left channel is 6 0 dB louder than the right channel The horizontal lines represent the poin
324. ist and choose Insert Remove Envelope from the shortcut menu From the submenu choose Mute A check mark is displayed next to the command and an envelope is added to the timeline Mute automation is either on or off with no fade between the on and off states If you want to use fades apply volume automation If you want to change the track s mute state throughout the track edit the envelope in the timeline For more information see Adjusting envelopes on page 132 If you want to change the track s mute state by recording automation settings select the Automation Settings fag in the track header Click the Mute button in the track header to change the track s mute automation state at the cursor position The button behaves differently depending on the track automation recording mode e When the track automation mode is set to Off the button mutes the entire track e When the track has a mute envelope and the track automation mode is set to Read the button changes state to reflect the envelope setting during playback but cannot be adjusted e When the track has a mute envelope and the track automation mode is set to Touch or Latch the button edits the envelope setting at the cursor position Notes When you apply mute automation to a track it s possible to have a track that is muted and soloed simultaneously if you use the Mute and Solo buttons in the track header The mute state overrides the solo state e Ifa trac
325. it MIDI data using the OPT list editor or piano roll Tip When the Clip Properties window is undocked you can double click its title bar to toggle its size especially handy when your re using the piano roll For more information see Using clips with tracks on page 107 Editing a MIDI clip with OPT Piano Roll The piano roll editor is an OPT plug in that you can use to create and edit note events within the ACID Clip Properties window for a MIDI track For more information see Using the piano roll editor on page 187 Editing a MIDI clip with OPT Piano Roll The List Editor tab is an OPT plug in that you can use to perform detailed filtering and editing within the Clip Properties window for a MIDI track For more information see Using the list editor on page 191 186 Chapter 11 Merging controller data from a MIDI clip If you use MIDI clips that contain MIDI controller data the controller data will not be displayed in the timeline by default Right click the event on the timeline and choose Merge Envelope Data from the shortcut menu to represent MIDI controllers as envelopes on the timeline Note The Merge Envelope Data command is not available in inline MIDI editing mode For more information see Editing MIDI on the timeline on page 167 Tip When Lock Envelopes to Events is selected from the Options menu envelope points will move with an event as you move it along the timeline When Lock Envelopes to Events is not selected
326. it you want to use Displaying the piano roll If your track is routed to a MIDI device or VSTi soft synth you can switch from a drum grid view to a piano roll view Click the Program button choose Drum Maps and then choose None Navigating the piano roll or drum grid In inline MIDI editing mode adjusting the height of the track will allow you to see more or less of the piano roll or drum grid After you set the height of the track you can use the following methods to navigate Scroll vertically Perform any of the following actions to scroll vertically within a track e Use the scroll buttons at the left edge of the track to scroll up or down Free Fingers Low Bongo High Bongo Ride Gwm Wibra Slap Crash Gwa Cowbell Splash Cy Tambourine Ride Bell Piano roll Drum grid e With the Draw or Selection g tool hover over the timeline and hold Ctrl while rolling the mouse wheel forward orback M gt ka e Hold Ctrl while dragging the keyboard drum list up or down e Hover over the keyboard drum list and roll the mouse wheel forward or back Zoom note height Perform either of the following actions to zoom note height e With the Draw Ea or Selection tool hover over the timeline and hold Ctrl Alt while rolling the mouse wheel forward or back 97 e Hover over the keyboard and hold Shift while rolling the mouse wheel forward or back Zoom note width Note width is based on the horizontal zoom level
327. its settings click the Insert Hide Envelope button 7 You can also remove continuous controller envelopes on the Output Settings tab in the Track Properties dialog Removing effect automation envelopes 1 Click the arrow adjacent to the Track FX button and choose FX Automation from the menu The FX Automation Chooser appears 2 Click the plug in whose automation envelopes you want to remove The parameters for the effect appear in the dialog 3 Clear the check boxes for the envelopes to be removed Click OK Tip You can bypass effect automation without removing envelopes For more information see Bypassing effect automation on page 112 Automating 5 1 surround projects In a 5 1 surround project you can automate the center channel s volume and surround panning using keyframes For more information see Automating panning on page 217 Automation recording modes Automation recording allows you to edit envelope and keyframe settings by using the controls in the ACID interface When combined with a control surface you can create fades and adjust control parameters with a level of control that only a tangible control can provide For more information see Connecting a control surface on page 241 Automation recording is available for the following settings e Audio track envelopes using the controls in the track header For more information see Working with track envelopes on page 132 e MIDI track envelopes using th
328. ividual events Tip You can also use folder tracks to maintain alternate mixes of a project For example create two distinct drum parts and move the tracks to separate folder tracks Mute one of the drum folder tracks to choose which beat is used when you play or render your project Creating a folder track From the Insert menu choose Folder Track A folder track is added below the currently selected track You can create nested folder tracks by dragging a folder track to an existing folder track Adding existing tracks to a folder track To add an existing track to a folder track drag the track to the folder track When the folder track is expanded you can specify the location of the track by dragging it to the desired position When the folder track is minimized dragging the track to the folder track header places the track at the top of the list within the folder track Removing tracks from a folder track To remove a track from the folder track expand the folder track and drag the track to another location in the track list Muting a folder track To mute all tracks in a folder track click the Mute button 8 on the folder track s header To unmute the folder track click the Mute button again Soloing a folder track To solo only the tracks in a folder track click the Solo button T on the folder track s header To unsolo the folder track click the Solo button again Editing events in a folder track When the folder track
329. ixer control the signal levels may cause the meter to clip If the meter clips the level is displayed in red at the top of the meter and the audio is distorted You can lower the mixer control level and click the red display to reset the meter A better way to reduce clipping however is to adjust the volume of each track Tip You can also reset the clip by right clicking the meter and choosing Reset Clip from the shortcut menu Muting mixer controls Clicking the Mute button on a mixer control temporarily suspends playback of the control When a mixer control is muted it appears grayed out and the word Muted appears at the bottom of the meter Clicking the Mute button a second time returns the mixer control to normal playback You can also press Z to mute a mixer control or group of controls Tip Press Ctrl and click the Mute button to mute only the selected mixer control and restore any other muted controls If the selected mixer control is already muted press Ctrl and click the Mute button to restore all controls Soloing mixer controls Clicking the Solo button 1 on a mixer control isolates playback by muting all other mixer controls For example when you solo a bus all remaining busses assignable effects and soft synths appear grayed out and the word Muted appears at the bottom of their respective meters Clicking the Solo button a second time returns all mixer controls to normal playback You can also press X to solo a mi
330. ject is playing Marker Marker bar Ls Moving markers 1 Place the mouse pointer on the marker to be moved The hand cursor d appears 2 Drag the marker to the desired position Naming markers You can name markers in your project You may want to name markers based on parts of the project For example you may want to identify choruses refrains bridges or instrument solos as reference points along the timeline 1 Place the mouse pointer on the marker to be named The hand cursor i appears 2 Right click the marker and choose Rename from the shortcut menu A box appears next to the marker WORKING IN THE TRACK VIEW 89 90 Chapter 5 3 Type a marker name in the box and press Enter to save the name Tip You can use the same steps to rename a marker Alternately you can double click the marker and enter anew name Navigating to markers While you are working on your project you may have scrolled to a portion of the project where the cursor is not visible There are two ways to move the cursor directly to the selected marker e Right click the marker and choose Go To from the shortcut menu e Click the marker once e Press the number key not on the numeric keypad corresponding to the marker number Tip You may also navigate from one marker to the next by pressing Ctrl left right arrow key Adjusting tempo to match cursor to marker Position the cursor right click the marker tab and choose Adjust tempo to
331. k a device name to customize its behavior Restores all control surface preferences to the default settings Note You can connect one Mackie Control Universal with up to four Mackie Control Universal Extenders one Frontier TranzPort and up to five generic MIDI controllers APPENDIX A 239 240 APPENDIX A Customizing keyboard shortcuts From the Options menu choose Customize Keyboard to customize the keyboard shortcuts available in the ACID interface The Keyboard mapping box displays the currently assigned shortcut keys Click a tab in the middle of the dialog to choose which shortcuts you want to see Editing or creating new shortcuts 1 Click a tab in the middle of the dialog to indicate the type of command you want to assign to a keyboard shortcut 2 Select a command in the list Tip You can type a word in the Show commands containing box to filter the list of commands to display only commands that contain the word you typed 3 Click the Shortcut keys box and press the key combination you want to assign to the selected command 4 Click the Add button to assign the key combination in the Shortcut keys box to the selected command Saving a keyboard mapping Click the Save as button and type a name to save your current keyboard shortcuts to an ini file in the C Documents and Settings user name Local Settings Application Data Sony ACID Pro 6 0 folder Tip The Application Data folder is not visible unless the Sho
332. k s Solo button is selected the track is included in the solo group but it will be muted whenever the mute automation is set to mute the track e Ifthe track s Mute button is selected the track is muted regardless of the mute automation settings For more information see Track automation on page 127 Adding a MIDI controller envelope 1 2 Select the track where you want to add or remove the envelope Perform one of the following actions e Click the Insert Hide Envelope button 8 T next to the controller s slider in the track header e From the Insert menu choose Envelopes and then choose a controller type WORKING WITH MIDI 183 184 Chapter 11 e Right click the track header choose Insert Remove Envelope from the shortcut menu and then choose a controller type If the controller you want to adjust is not displayed in the menu choose Configure Controllers from the menu You can use the Output Settings tab of the Track Properties window to configure which controllers are available on the track 3 If you want to change the controller setting throughout the track edit the envelope in the timeline For more information see Adjusting envelopes on page 132 4 Ifyou want to change controller settings by recording automation click the Automation Settings button Y in the track header The slider handles are displayed as in automation mode Tip f you want to record MIDI controller envelopes into a track using a hardw
333. k up transfer or delete custom presets from any of the plug ins you use in ACID For more information see Using the Preset Manager on page 151 1 Click the Track FX button 4 The Audio Plug In window appears Note fthe track has no plug in chain clicking the Track FX button displays the Plug In Chooser dialog Click the Edit Chain button EF to display the Plug In Chooser dialog Add and arrange plug ins to create a plug in chain and click OK Click a specific plug in and adjust the effect s parameters manually or choose one of the presets from the Preset drop down list For more information about effect parameters click the Plug In Help button 12 in the Audio Plug In window 5 Click the Save Chain Preset button fe The Save Plug In Package dialog appears Enter a name for the package 7 Click OK to save the plug in chain as an effect package Removing or bypassing all effects on tracks You can clear a track of all effects by right clicking the Track FX button 4 and choosing Delete All from the shortcut menu You can bypass all of a track s effects without removing them by right clicking the Track FX button and choosing Bypass All from the shortcut menu To apply them again right click the Track FX button 8 and choose Enable All from the shortcut menu Using track automation envelopes Track envelopes allow you to control volume panning assignable effect send levels bus send levels and effec
334. l and drag a section header or multiple section headers to a new position on the timeline A I is displayed to indicate where the section will be copied 2 When you drop the section it is copied to the position where you dropped it Note Hold Ctrl or Shift to select and copy multiple selections Deleting a section Deleting a section removes the section and all events are removed from the timeline Right click a section label and choose Delete from the shortcut menu Events are split at each end of the section and all events envelope points regions commands and markers within the section are deleted Downstream events ripple to fill the space of the section you deleted For more information see Splitting events on page 64 Moving a section label Hold Alt while dragging a section label to move the selected labels without affecting the contents of the timeline Hold Ctrl Alt while dragging a section label to create copies of the selected labels without affecting the contents of the timeline Removing a section label Removing a section label removes the section label from the timeline without affecting the section s events Right click a section label and choose Remove Label from the shortcut menu EDITING EVENTS 73 Clearing all events from a section Clearing events removes the events from a section while leaving the section label intact Right click a section label and choose Clear Events from the shortcut menu Events are sp
335. l overlays please check the Mackie Web site http www mackie com products mcu index html CONTRO DISPLAY MACKIE Composting Moton Blur MARK Fade to Color r i ue i Tren 1 ua r VIEN D NE EW WINDOWS W mpm AL The overlay identifies the default control mapping You can also customize the buttons and controls on the Mackie control For more information see Configuring or customizing control mappings on page 245 When you use the default mapping the Mackie Control is divided into several functional areas All functionality described in this document refers to the default control mapping Connecting the Mackie Control Universal You can use one Mackie Control Universal with up to four Mackie Control Extenders with ACID Perform the following steps for each device If you re using Mackie Control Extenders you ll need a multiport MIDI interface with MIDI In Out ports for each device 1 Connect the MIDI Out port on your MIDI interface to the MIDI In port on your Mackie Control Universal 2 Connect the MIDI In port on your MIDI interface to the MIDI Out port on your Mackie Control Universal 3 Repeat Steps 1 and 2 for each Mackie Control Extender Configuring the software to use the Mackie Control Universal 1 From the Options menu choose Preferences to display the Preferences dialog 2 Enable your MIDI input and output ports a Select the MIDI tab in the Preferences dialog fe y Preferen
336. l prevent you from opening the associated library When the Media Manager tool closes it automatically removes the log file If the application terminates inappropriately close all running ACID windows restart ACID and close the application to clear the log file 1 Inthe Media Manager window click the Media Library Actions button ii and choose Open Media Library from the menu The Open Media Library dialog is displayed 2 Choose the folder where the library you want to open is stored e Choose a drive and folder from the Look in drop down list e Use the bar on the left side of the window to browse to a folder 3 Selecta library from the list Click the Open button to open the selected library The name of the current library is displayed in the upper right corner of the Search Results pane Defauk f OO gt ale ea E di a Mame Rating Comments ACID Type 29 NY Dance Pro Fro Loop I 30 x MY Dance Pro Pro Loop 31 A MY Dance Fro Fro Loop a2 A MY DANCE sPROM Loop 33 mal DANCE sPROM Loop a FRR c a a z Adding media files to a library Before you can search or organize your media files you ll need to add them to a media library USING THE MEDIA MANAGER 75 When the Sony Sound Series Loops amp Samples reference library is installed and set as the active reference library in the Media Manager Options dialog tags and custom properties from the reference library will be applied to m
337. le click a button to remove it 4 Click Close to save the toolbar settings and exit the dialog Using the time display The time display above the track list reflects the cursor s position on the timeline Changing cursor position You can edit the cursor position using time as it is displayed on either the beat ruler or time ruler e To set the cursor s position based on the beat ruler right click the time display and choose Edit Cursor Position Beats from the shortcut menu e To set the cursor s position based on the time ruler right click the time display and choose Edit Cursor Position Time from the shortcut menu Once you make your selection from the shortcut menu a box appears for the appropriate time display Enter the cursor s new position and press Enter Tip You can also edit the cursor position directly by double clicking the desired time display value and entering the new cursor position Changing the time display The time display window always reflects the format of the time ruler You may change the ruler settings for the time ruler via the time display window 1 Right click the time display window to display a shortcut menu 2 Choose Time at Cursor Format to display a submenu 3 Choose the desired time format Both the time window and time ruler display the chosen time format n Select the properties to use as future defaults for new tracks These properties will default to the values of
338. le that is longer than 30 seconds to a project the Beatmapper Wizard allows you to add tempo information to the file Adjusting time stretching Beatmapped clips only If you want to preserve the clip s pitch while you adjust the tempo select the Preserve pitch when stretching check box When the check box is cleared you can still adjust the tempo of the clip but the pitch is also affected Adjusting pitch shift Enter a value in the Pitch Shift semitones box or use the spinner control to adjust the pitch of all events that use the clip Adjusting stretching properties for loop or Beatmapped clips The Stretch tab allows you to specify how pitch shifting and time stretching is handled for loop or Beatmapped clips After you have edited a file s properties click the Save File button El to embed ACID information with the file Tip To save to a different file click the Save File As button mj If you cannot or do not wish to embed ACID information with the file you can set the properties to suit your needs and they will be saved with the ACID project but not with the file This means however that you must set the properties for every project where you use the loop Configuring the stretching properties and clicking the Save File button H allows you to set and forget the properties so the properties will be set for any project If you edit the file in another audio editing program ACID specific data may be removed If t
339. lease the mouse button All notes inside the region will be selected This method is good for selecting a group of notes that are close together Vertical Can be used to easily select all notes that occur within a time range The vertical selection box automatically selects all of the notes between your first mouse click and where you draw the selection box even notes that are not visible at the current magnification are selected Horizontal Can be used to easily select all notes on a single or multiple adjacent rows The horizontal selection box automatically selects all notes on a row that is touched by the selection box even notes that are not visible at the current magnification are selected To change the type of selection box you are using right click the mouse while holding down the left mouse button Clicking the right mouse button will toggle through the three types of selection boxes Adding or deleting notes 1 Click the Enable Inline MIDI Editing button fal 2 Use the scroll buttons at the left edge of the track to navigate the piano roll drum grid Tip Drag the bottom border of the track header to increase the height of the track 3 Select an editing tool Tool Icon Description Draw vA Allows you to insert edit select and move notes In drum grid mode the Draw and Paint tools both draw fixed length note events Tool Icon Description Paint Va Allows you to insert notes of a specific length The Paint tool is
340. lected you can only draw or drag notes within the selected scale Hold Alt while drawing or dragging notes to override snapping Click the down arrow next to the button to choose a root note and scale Quantizing note events You can use the MIDI Quantize dialog to force notes to align with musical beats based on the parameters you specify 1 Select the notes you want to quantize For more information see Selecting note events on page 190 2 Click the Quantize button K The MIDI Quantize dialog appears 3 From the Quantize resolution drop down list choose the beat to which you want the selected notes to be quantized Select the Start times check box to snap start times to the beat selected in the Quantize resolution drop down list 5 Select the Note durations check box to snap note durations to the beat selected in the Quantize resolution drop down list 6 Click Apply Deleting note events Use the Erase tool E to erase events in the piano roll Alternately you can select events and press Delete For more information see Selecting note events on page 190 Undoing and redoing You can easily undo and redo actions in the piano roll editor by using keyboard shortcuts Press Ctrl Z to undo an action and press Ctrl Shift Z to redo an action Using the list editor The List Editor tab is an OPT plug in that you can use to perform detailed filtering and editing within the Clip Properties window for a MIDI clip Events
341. lick it and choose Duplicate Track from the shortcut menu An exact copy of the track is created and its events and adds it below the original track in the project The words Copy of appear before the name of the duplicate track to identify it in the track list For creative ways to use duplicate tracks see Playing with duplicate tracks on page 261 Deleting tracks You can delete unnecessary tracks from a project by selecting the track and using any of the following methods e Choose Delete from the Edit menu e Right click a track and choose Delete Track from the shortcut menu e Press Delete Copying cutting and pasting tracks Copying a track places an exact copy of the selected track on the clipboard but leaves the track view unchanged To copy a track select the track and do one of the following Click the Copy button on the toolbar Choose Copy from the Edit menu Right click the track header and choose Copy Track from the shortcut menu Press Ctrl C Cutting a track removes it from the track view and places it on the clipboard To cut a track select it and do one of the following Click the Cut button l on the toolbar Choose Cut from the Edit menu Right click the track header and choose Cut Track from the shortcut menu Press Ctrl X Tracks that are copied or cut to the clipboard can be pasted back into the current project or into a different project an unlimited number of times This is a useful way to shar
342. lips with tracks on page 107 Tips Hold Ctrl Shift while double clicking a MIDI event to enter inline editing mode e While in inline editing mode drag over a blank area of the timeline with the Draw tool A to create a new clip and draw an empty event e While in inline MIDI editing mode you can hover over a note or velocity stem to view its value in the bottom right corner of the timeline on Ifyou want to move a MIDI event while in timeline MIDI editing mode drag the top of the event with the Draw A or If you want to edit a single event right click the event and choose Copy to New Clip from the shortcut menu Choosing a drum map or kit for a track MIDI tracks can display a piano roll or a drum grid For more information see Creating or editing drum maps on page 200 Tracks that are routed to the DLS soft synth will display a drum grid only if a drum map exists for the current patch You cannot edit drum maps for GM2 drum kits Choosing a drum map or kit 1 Click the Program button on the track header 2 Perform one of the following actions e If your track is routed to the DLS soft synth choose Drum Kits from the menu A submenu displays the available drum kits e If your track is routed to a MIDI device or a VSTi soft synth choose Drum Maps from the menu and then choose Select Drum Map from the submenu The Output Settings page of the Track Properties dialog is displayed 3 Choose the drum map or k
343. lit at each end of the section and all events within the section are deleted For more information see Splitting events on page 64 74 Chapter 3 Chapter 4 Using the Media Manager This chapter covers the management and tagging of your media files in ACID using the Media Manager feature Creating a new media library You can create multiple media libraries as necessary to organize your media Each media library is maintained by the Media Manager software as a separate database that stores information about the media contained within it 1 From the Media Manager window click the Media Library actions button i and choose New Media Library from the menu The New Media Library dialog is displayed In the Name box type the name you want to use to identify the library The Folder box displays the path to the folder where the library will be created Click Browse to choose a different location A Click the Create button to create the new library Opening a media library The Media Manager window displays the contents of the current media library You can open a different library at any time Important When you open a media library the Media Manager tool creates a transaction log file This file is created in the same folder as the medialib file and uses the same base name as the medialib file For example the transaction log file for default medialib would be default_log ldf Do not delete these log files Doing so wil
344. ll also learn how to use ripple editing to expand the possibilities of timeline editing Finally you ll take a look at advanced editing techniques such as slipping and sliding events changing event properties and adding event envelopes Note For the basic event editing topics in this chapter make sure that ripple editing is turned off Verify that the Ripple Edits command in the Options menu is not selected For more information see Ripple editing on page 67 Copying events Copying an event a time selection or event within a time selection places an exact copy of the selected event s on the clipboard but leaves the track view unchanged Events copied to the clipboard can be pasted in the project an unlimited number of times In addition clipboard content remains on the clipboard until replaced by new content 1 Select the event data you want to copy or make a time selection For more information see Making selections on page 44 2 Copy the event data using any of the following methods e Click the Copy button on the toolbar e Choose Copy from the Edit menu e Right click the selection and choose Copy from the shortcut menu e Press Ctrl C Pasting events The clipboard s contents can be pasted in a project an unlimited number of times However an event is always pasted in the track it was copied cut from In addition pasting the contents of the clipboard over an existing event results in the pasted event overlappin
345. ll be added f Double click the name in the Instrument column and type the name of the instrument associated with the selected key 9 Click OK to close the dialog and save your changes Choosing a drum map for a track Tracks that are routed to a VSTi soft synth or a MIDI device can display a piano roll or a drum grid Tracks that are routed to the DLS soft synth will display a drum grid only if a drum map exists for the current patch You cannot edit drum maps for GM2 drum kits Synchronizing using MIDI timecode ACID can generate MIDI timecode MTC and MIDI clock as well as trigger from MIDI timecode These features allow ACID to be synchronized with other audio applications and external audio hardware Note The software cannot chase MTC or MIDI clock Generating MIDI timecode MIDI timecode is a standard timecode that most applications and some hardware devices use to synchronize themselves Stable MTC is generated at all available frame rates for other applications to chase 1 Specify a MIDI output device to which you will send timecode and a frame rate for the timecode These options can be found on the Sync tab of the Preferences dialog For more information see Using the Sync tab on page 236 2 From the Options menu choose Timecode and choose Generate MIDI Timecode from the submenu MTC begins generating wherever you click the Play button gt Generating MTC with an offset In some cases you may want to start
346. log appears 5 Enter a name for the package Click OK to save the plug in chain as an effect package Organizing your plug ins You can create folders for organizing your plug ins within the Plug In Chooser dialog You will notice that the Plug In Chooser dialog functions similarly to Windows Explorer However the Plug In Chooser dialog only allows you to work with plug ins installed on your system Automating effect parameters If a plug in supports automation you can add envelopes to a soft synth s bus track to automatically adjust effect parameters over time For more information see Using track automation envelopes on page 113 Using the Preset Manager Once you have created custom presets for effects or effect chains you can use the Preset Manager to back up transfer or delete custom presets from any of the plug ins you use in ACID The Preset Manager is a standalone application that you can use to manage ACID Sound Forge and Vegas presets You can install the Preset Manager from the ACID installation disc After you install the application choose Contents and Index from the Help menu in the Preset Manager for instructions on how to manage your presets Working with multiple mixer controls When you select multiple busses assignable effect controls or soft synth controls in the mixer you can simultaneously perform functions on the controls These functions include the following USING THE MIXER 151 152 Chapter 9 e C
347. lose the Preferences dialog APPENDIX B 243 244 APPENDIX B 5 From the Options menu choose External Control to enable the Mackie Control Universal Configuring channel mappings for Mackie Control Extenders If you re using Mackie Control Extenders you ll need to set up your channel mapping Channel mapping tells the software how the devices are arranged on your desktop For example if your Mackie Control Universal is on the left of your Mackie Control Extender you could configure the Mackie Control to adjust channels 1 through 8 and use the Mackie Control Extender to adjust channels 9 through 16 If you have a Mackie Control Universal positioned between two Mackie Control Extenders you could adjust channels 1 through 8 on the left Extender adjust channels 9 through 16 on the Mackie Control Universal and adjust channels 17 through 24 on the right Extender 1 From the Options menu choose Preferences to display the Preferences dialog 2 Select the External Control amp Automation tab 3 Double click your Mackie Control in the Active control devices list to display the Configure Mackie Control dialog The current channel mapping is displayed on each device s LCD 4 Choose the channels you want to control with the Mackie Control Universal a From the Device Type drop down list choose Mackie Control b From the Channel Mapping drop down list choose the channels you want to adjust with the Mackie Control Universal Conf
348. ls in the track list can function as trim controls or automation controls for track volume panning assignable effects send and bus send levels Adjusting the trim control affects the level of the entire track To display trim controls in the track header deselect the Automation Settings button Track automation Track automation will always affect all events on the track This means that any event envelopes will be calculated after the track automation For more information see Using event envelopes on page 71 Tip Choose a fade type from the Audio default drop down list on the Editing tab of the Preferences dialog to set the default fade type that will be used when you add volume and panning envelopes This setting is used only when you create new envelopes when you add a point to an existing envelope the new point always uses the same fade type as the preceding envelope point Also this setting is not used for event envelopes Mute automation Mute automation changes a track s mute state throughout your project Mute automation is either on or off with no fade between If you want to use fades apply volume automation When you apply mute automation to a track it s possible to have a track that is muted and soloed simultaneously The mute state overrides the solo state e Ifa track s Solo button is selected the track is included in the solo group but it will be muted whenever the mute automation is set to mute the track e Ifthe
349. match cursor to marker from the shortcut menu The project tempo changes so that the cursor position matches the selected marker Deleting markers You may remove markers from the project at any time Because markers are automatically numbered up to 99 when they are placed the remaining markers are not renumbered when one is deleted Rather the remaining markers retain their numbers However if you add markers later numbering begins to fill the sequence gap For example if you have five markers in your project and delete markers three and four the remaining markers are listed as one two and five When you add markers again the markers are numbered as three and four 1 Place the mouse pointer on the marker to be deleted The hand cursor d appears 2 Right click the marker and choose Delete from the shortcut menu The marker is removed from the project Working with time markers Unlike standard markers time markers are tied to absolute time within your project They are added differently than standard markers and appear on the time ruler at the bottom of the track view Otherwise time markers can be manipulated just like other markers Placing time markers Time markers are placed at the cursor position You may place a time marker in one of the following ways e From the Insert menu choose Time Marker e Press H You may use this method to place a time marker while the project is playing back 00 00 08 00 00 10 Time
350. mation Settings button to change the automation recording mode for each track and bus track APPENDIX B 245 246 APPENDIX B Using the Mackie Control Universal The following sections describe the default control mapping for the Mackie Control Universal when used with ACID The Mackie Control Universal can control either trim or automation settings In order to control automation settings the Automation button in the Audio Video section must be selected and the track or bus you want to edit must be set to Automation Write Touch or Automation Write Latch Hold the F1 button while turning the V Pot or use the Automation Settings button to change the automation recording mode for each track and bus track Channel section The channel section includes V Pots knobs buttons and faders that you can use to edit your tracks and busses If you re using Mackie Control Extender units you can control eight additional channels with each Extender For more information see Configuring channel mappings for Mackie Control Extenders on page 244 1 x 2 serene ele ee 4 ry e eee ee 5 a m a 7 T y gt n gt 2 es ere j ef eco eee n sre i 3 8 eoeeeee 7 Item Description 1 V Pot Adjusts values for panning volume when Flip button is selected and effect parameter values e Audio track volume Adjusts track volume when the Pan or Sends button is selected and the Flip
351. me 1 Press Track or Track to select the track or mixer control you want to adjust 2 Press Shift Loop until the TranzPort displays volume 3 Hold Shift while rotating the jog wheel to adjust the volume of the selected track or mixer control Adjusting track or bus panning 1 Press Track 4 or Track to select the track or mixer control you want to adjust 2 Press Shift Loop until the TranzPort displays panning Note Not all mixer controls allow panning adjustment 3 Hold Shift while rotating the jog wheel to adjust panning for the selected track or mixer control Editing a track s input device 1 Press Track 4 or Track to select the track you want to adjust 2 Press Shift Loop until the TranzPort displays the track s input device 3 Hold Shift while rotating the jog wheel to scroll through the available inputs When you change the input device an asterisk is displayed before the device name on the TranzPort APPENDIX B 257 4 Press Shift Punch to set the input device Editing a track or mixer control s output device 1 Press Track 4 or Track to select the track or mixer control you want to adjust Press Shift Loop until the TranzPort displays the track s output device Hold Shift while rotating the jog wheel to scroll through the available output devices When you change the output device an asterisk is displayed before the device name on the TranzPort 4 Press Shift Punch to set the output device
352. med between programs running on the same PC A Virtual Studio Technology instrument VSTi is software synthesizer plug in technology for outputting MIDI developed by Steinberg Media Technologies AG A digital audio file format developed by Microsoft and IBM One minute of uncompressed audio requires 10 MB of storage A waveform is the visual representation of wave like phenomena such as sound or light For example when the amplitude of sound pressure is graphed over time pressure variations usually form a smooth waveform Each event shows a graph of the sound data waveform The vertical axis corresponds to the amplitude of the wave For 16 bit sounds the amplitude range is 32 768 to 32 767 For 8 bit sounds the range is 128 to 127 The horizontal axis corresponds to time with the leftmost point being the start of the waveform In memory the horizontal axis corresponds to the number of samples from the start of the sound file A Microsoft file format that can handle audio and video presentations and other data such as scripts URL flips images and HTML tags Advanced Streaming Format files can be saved with asf wma or wmv extensions APPENDIX D 275 276 APPENDIX D Index Numerics 5 1 Surround Plug In Pack 209 220 5 1 Surround See Surround A AC 3 Encoder 209 220 Add channels panning model 113 216 Adding Assignable effects 142 Busses 141 Events 41 Media to projects 37 MIDI tracks 16
353. menu choose Export Loops to create new loops using the original loop media files in your ACID project A new loop file is created for every tempo change in the project which can result in multiple loop files being created from a single loop media file 1 From the File menu choose Export Loops The Export Loops dialog appears From the Save in drop down list choose the drive or folder to which the new files will be saved From the Save as type drop down list choose the file format From the Template drop down list choose an audio format or click Custom to create custom rendering settings AEE ew Click Save A progress dialog appears for each track as it is rendered to a file Tempo information is included in the file name of each loop file created e g bass 120 000 BPM wav Chapter 8 Using Automation Automation allows you to control audio and video levels panning and effect parameter automation over time You can create fades apply stereo panning and vary effect parameters throughout your project Automation is represented on the ACID timeline as an envelope or set of keyframes You can create automation by adding envelopes or keyframes to your tracks including bus tracks or you can record automation parameters by adjusting controls in the ACID interface or on a control surface during playback For more information see Connecting a control surface on page 241 Showing or hiding automation controls The contro
354. more points by double clicking the envelope Note that each new point also has the hold fade curve gt oY Set each point to a different level For more information see Adjusting individual envelope points on page 133 You can repeat the pattern by copying and pasting the envelope points repeatedly For more information see Cutting copying and pasting envelope points on page 134 Turning automated effects on and off You can use effect automation envelopes to change effect settings over time but you can create a simple dramatic effect by simply automating whether the effect is processed on or bypassed off 1 Add an automatable effect to a track and adjust the effect s parameters to your liking For more information see Using track effects on page 110 In the Audio Plug In window click the FX Automation button 1 to display the FX Automation Chooser 3 Click the automatable plug in at the top of the FX Automation Chooser A list of the effect s automatable parameters appears Select the Bypass check box and click OK An envelope for the Bypass parameter of the effect appears on the track 5 Add multiple points to the envelope For more information see Adding envelope points on page 132 Adjust the envelope points to alternate between bypassing the effect Bypass True and processing the effect Bypass False For more information see Adjusting individual envelope points on page 133 Preview the effect The track altern
355. mouse and or keyboard to fine tune the selection The increment arrow does not change Insert the desired selection data in the track view For more information see Inserting selections in the track view on page 105 9 Repeat steps six through eight to insert all desired selections in the track view Chapter 7 Working with Tracks This chapter covers advanced track features including using clips track effect chains track envelopes groove mapping and stereo panning modes You ll also learn more about track types track properties track folders and rendering tracks to new files Using clips with tracks In previous versions of ACID each track in your project corresponded to a single media file If you re comfortable with the track equals media model this version of ACID can behave in much the same way when you add media to your project a new track is created for the media file You can use the Draw H and Paint H tools to create events using the track s media In this version of ACID you can now add multiple media files or clips to one track Think of clips as the palette you can dip your paintbrush in when you paint on the timeline For example if you want to use one track for all the guitar loops in your project you can create a single guitar track and add each guitar loop as a separate clip When a track has multiple clips the Draw and Paint tools create events using the active clip A single audio track can
356. mpo Displays the original tempo of the track as determined by the Beatmapper Wizard Enter a value in the box or use the spin control to adjust the tempo Downbeat offset Displays the location of the track s first downbeat as determined by the Beatmapper wizard Enter a value in the box or use the spin control to adjust the location Beatmapper Wizard Click the Beatmapper Wizard button to adjust a track s tempo information For more information see Using the Beatmapper on page 114 Reloading files Clicking the Reload button Relead restores all settings from the media file Any setting changes made on the Stretch tab of the Clip Properties are discarded Clicking this button also updates the Clip Properties window when changes are made to the properties from an external editor WORKING WITH TRACKS 119 120 CHAPTER 7 Replacing files Clicking the Replace File button EaReplace displays the Replace File dialog and allows you to replace the audio file on the current clip with a new audio file This feature only replaces the actual audio All track timing effects and envelopes remain Tip You can also replace a file by dragging an audio file from the Explorer and dropping it on the track name of an existing track Saving file properties When you make changes in the Clip Properties window the changes you have made are saved in the project file but does not alter the original media file To save clip property changes
357. n Number of cents by which you want to bend the pitch Time in measures beats ticks where you want the event to begin MIDI channel 1 16 where you want to send the event Note to which you want to apply pressure Pressure 0 127 you want to apply to the note Most devices will apply more vibrato to a note as the pressure increases Time in measures beats ticks where you want the event to begin MIDI channel 1 16 where you want to send the event Number of the new patch you want to play Packed nonregistered parameter numbers NRPN are used to adjust settings such as vibrato and filtering but are not part of the General MIDI specification Refer to your MIDI device s documentation for more information about the required parameters Packed registered parameter numbers RPN are used to adjust common settings such as pitch wheel range MIDI notes and frequencies The following table shows the musical pitch and frequency associated with each MIDI note A5 is 440 Hz and middle C is C5 at 261 63 Hz These values can differ often by one octave from values used by other manufacturers The following frequencies are based on equal temperament tuning Pitch MIDIKey Frequency CO 0 8 176 C 0 1 8 662 DO 2 9 177 D 0 3 9 723 EO 4 10 301 FO 5 10 913 F 0 6 11 562 GO 7 12 250 G 0 8 12 978 AO 9 13 750 A 0 10 14 568 BO 11 15 434 Pitch MIDI Key Frequency Pitch MIDI Key Frequency G3 43 97 998 D7 86 1174 7 G 3 44 103 82 D
358. n as you drag Move Freely Move Left Right Only and Move Front Back Only Double click Double clicking the pan point resets it to the center front of the surround panner Double clicking in the Surround Panner window moves the pan point to the double click location Ctrl drag Makes fine adjustments Shift drag Constrains motion to vertical horizontal or diagonal motion at 45 degree increments Alt drag Constrains motion to a constant radius from the center of the surround panner Shift Alt drag Constrains motion to the maximally inscribed circle a constant radius at the greatest possible distance from the center of the surround panner WORKING WITH 5 1 SURROUND 215 216 Chapter 13 Method Description Arrow keys Moves front back left right Ctrl Arrow keys Makes fine adjustments Page Up Page Down Moves front back Shift Page Up Page Down Moves left right Numeric keypad 1 9 Jumps to a corner edge or center of the surround panner Ctrlt Numeric keypad 1 3 7 9 Jumps to a location on the maximally inscribed circle a constant radius at the greatest possible distance from the center of the surround panner Mouse wheel Moves front back Shift mouse wheel Moves left right Ctrl mouse wheel Makes fine front back adjustments Ctrl Shift mouse wheel Makes fine left right adjustments Choosing pan types When you pan a track or mixer control you can choose among several pan types to determine how the
359. n dealing with sound because the ear perceives loudness in a logarithmic scale In ACID most measurements are given in decibels For example if you want to double the amplitude of a sound you apply a 6 dB gain A sample value of 32 767 maximum positive sample value for 16 bit sound can be referred to as having a value of 0 dB Likewise a sample value of 16 384 can be referred to having a value of 6 dB A program that enables Windows to connect different hardware and software For example a sound card device driver is used by Windows software to control sound card recording and playback A system for delivering songs videos and other media over the Internet in a file format that protects copyrighted material Current proposals include some form of certificates that validate copyright ownership and restrict unauthorized redistribution A general term describing anything that alters digital data Signal processors have existed for a very long time tone controls distortion boxes wah wah pedals in the analog electrical domain Digital Signal Processors alter the data after it has been digitized by using a combination of programming and mathematical techniques DSP techniques are used to perform many effects such as equalization and reverb simulation Since most DSP is performed with simple arithmetic operations additions and multiplications both your computer s processor and specialized DSP chips can be used to perform any DSP operat
360. n of the source media file For creative ways to use event slipping see Duplicating with offset on page 262 Slip trimming events Hold Alt while dragging the right or left edge of an event The slip trim cursor appears 1 As you drag the event edge the media moves with the event edge Sliding events Hold Ctrl Alt while dragging an event The slide cursor appears As you drag the relative position of the media remains fixed on the track and the event position changes You can use this technique when you want to maintain an event s length but want the event to play a different section of the source media file at a different point in your project Changing event properties To access event properties right click the event and choose Properties from the shortcut menu These properties are saved in the project but are not saved into the file when you save changes to a clip in the Clip Properties window For more information see Saving file properties on page 120 The following table describes each of the settings in the Event Properties dialog Item Description Start offset The Start offset for an event specifies a playback starting position that is different than the beginning of the file This is especially useful for loops you can change the feel of a loop by simply starting on beat two rather than beat one Item Description Pitch shift The Pitch shift value specifies a pitch shift for the selected event Event based
361. n the Search pane is set to hide automatically you can hover over the Search tab on the left edge of the Media Manager window to show the pane When you move your mouse away from the Search pane it hides automatically Docking and undocking the Search pane You can undock the Search pane from its location in the Media Manager window to float it over the ACID window or you can change the docking position of the pane within the Media Manager window To undock and move the Search pane drag its title bar to the desired location Resizing columns You can resize the columns in the Search Results pane by dragging the splitter between columns to the desired size To resize a column automatically double click a splitter Mame mF Rati a Acro MUSIC 5 sPROMG 04 pca USING THE MEDIA MANAGER 85 86 Chapter 4 Moving columns To move a column in the Search Results pane to a different location drag the column header to the desired location A red indicator shows where the column will be dropped ACID Type Beat Count Tempo Rara oop 16 100 000 D3 oop 5 55 000 E3 Showing or hiding columns 1 Right click the column headings and choose Column Chooser from the shortcut menu 2 Drag the columns you want to see from the Column Chooser dialog to the Search Results pane 3 To hide a column right click a column heading and choose Remove this Column from the shortcut menu Adding custom columns You can add custom columns to the Search Resul
362. naudible 1 Click the Draw Tool button 2 Click the event to be moved The event is highlighted to indicate that it is selected Tip You can hold Ctrl or Shift to select multiple events 3 Drag the event to a new location on the track Note Multiple selected events move in relation to the event being dragged Editing MIDI events You can use the inline MIDI editing mode to edit MIDI events directly in the timeline In this mode you can draw and erase notes in a piano roll or drum grid view For more information see Editing MIDI on the timeline on page 167 Using the cursor The ACID cursor is a flashing vertical line that spans the track view of the entire project The cursor position determines where events split where playback recording starts and where clipboard contents are pasted In addition the positioning of the cursor is essential to the creation of time selections GETTING STARTED 43 Positioning the cursor with the mouse 1 Click the Draw Tool button A 2 Click in the track view to position the cursor Positioning the cursor with the keyboard While using the mouse to position the cursor in the timeline is quick and intuitive it is not always precise For example you may want the beginning of a guitar solo to coincide with a snare drum hit or background vocals to enter exactly 3 minutes and 24 seconds into a song For these reasons you can also position the cursor using your keyboard For more informati
363. nd the appropriate CD information is not available on your computer the tracks are simply listed numerically In this case you can edit CD information and submit it to the Gracenote Media Database Note Using Gracenote MusiclD requires an active Internet connection For more information on using Gracenote MusiclD refer to www gracenote com Obtaining CD information 1 Insert a CD in your drive 2 Click the MusiclD button in the in the Extract Audio from CD dialog or browse to the CD and click the F button in the Explorer window For more information see Extracting media files from CD on page 38 For more information see GETTING STARTED 39 40 Chapter 2 Explorer window on page 22 Gracenote MusiclD attempts to obtain matching CD information and displays artist album and track data e Ifthe service locates an exact match this information is automatically displayed No additional action is necessary e Ifthe service locates multiple possible matches the Match dialog is displayed Proceed to step 2 3 Choose a method for completing the CD information e If none of the possible matches is appropriate click the Submit New button The Gracenote CDDB Disc Information dialog is displayed allowing you to complete information for the CD and submit it for inclusion in the Gracenote Media Database For help on submitting CD information click the Help Guidelines button in this dialog When you are finished typing informat
364. ndering settings For more information see Creating custom rendering settings on page 56 6 Click Save If you chopped to a new clip a new clip is added to the current track For more information see Using clips with tracks on page 107 If you chopped to a new track the file is added as a new track in the project For more information see Using assignable effects on page 142 Using the Chopper with one shots Selections of loops and Beatmapped files transfer flawlessly between the Chopper and the track view because the beats are clearly identified However one shot files present more of a problem You can use the following method to create accurate single hit selections in one shot files 1 Verify that the snapping options are active If snapping is not active choose Snapping from the Options menu and choose Enable from the submenu or press F8 2 Verify that the Link Arrow to Selection button E is selected Create a selection of the desired musical length in the Chopper For more information see Creating selections of a specific musical length on page 103 4 From the Options menu choose Snapping and choose Enable from the submenu or press F8 to toggle all snapping options off 5 Click the Link Arrow to Selection button E to toggle the linking option off You can now adjust the selection without changing the increment Drag the middle of the increment arrow to reposition selection length in the Chopper 7 Use the
365. neenes 266 Chopping new loops for alternate time Signatures ccc cece ec ccc cee e eee eeees 266 Chopping multiple files into a new IOOP 6 cece cece eee nent eeeeeneeneees 266 Creating drum roll build UPS ccc ccc ccc cece cece cece cece ee eeeeeeeeeeeeeeeaeeees 266 Cl Sat CUMING aee NEE ada suisse vcs EEEE OEE EN 267 Creating One track remixes 1 cece ccc ccc ccc cece eee e eee e eens sense eeeeeeeeeeees 267 Creating pseudo granular Synthesis cc ccc eee ee eee eee e nent eee eeeeeeneees 267 Building INSHUMENE SOlOS lt is 50500300e0reesne eos cedosseeedeee INEENS aT RERE 267 BUMGUINGS CAlCS so suse pE EE A E EEE EENT EEEN ees Rae 267 Eo E E SE S E E Ge baw ta dn E EE E EEE TEETE 269 A eae E E ho A E EE E E E i TABLE OF CONTENTS 13 14 TABLE OF CONTENTS Chapter 1 Introducing ACID Software Welcome Congratulations on purchasing a revolutionary software application for Microsoft Windows With ACID from Sony Media Software you can create great music by simply picking painting and playing System requirements The following lists the minimum system requirements for using ACID Microsoft Windows 2000 SP4 or XP 1 GHz processor 1 2 GHz if using video 256 MB RAM 512 MB recommended 150 MB hard disk space for program installation 600 MB hard disk space for optional Sony Sound Series Loops amp Samples reference library installation Microsoft Windows compatible sound card DVD RO
366. net The most common place to publish your project is ACIDplanet com a virtual community of ACID users ACIDplanet com allows you to do the following Share your music Listen to projects built by other ACID enthusiasts Download free loops Enter remix contests co sponsored by Sony and major record labels Publishing your project to the Internet involves two distinct procedures creating a personal account and uploading the project Creating a personal account You can create accounts at Web sites where you can publish your song files Each Web site that offers publishing directly through ACID software will guide you through its own account creation process If you haven t created an account and you attempt to publish a song you will be directed to complete the Publish Setup utility 1 From the File menu choose Publish The Publish Setup dialog displays 2 Follow the on screen instructions to create an account At any time you can go back and create another account at a different Web site The Web site you are currently logged into in the Publish Setup utility is where your song is published when you choose Publish from the File menu Uploading a project Publishing a project file copies your media to the Web so you can share it with other Web users The following procedure assumes you already have an account set up with a publish provider If not you will first be redirected to set up an account After successfully creating an account
367. ng file formats can store this type of information internally e MP3 e Windows Media Format WMA and WMV e WAV e WAV64 e SFA e PCA e Scott Studios For other file types the Media Manager tool will save metadata to an sfl file using the same base name as your media file Follow these steps to save tag and property information in your media file s 1 Inthe Search Results pane select media files for which you want to save tags and properties e To select a single file click the file or e To select multiple consecutive files click the first file hold the Shift key and then click the last item or e To select multiple files that are not consecutive hold the Ctrl key and click each file 2 Click the Save Tags and Properties to File s button il in the top right corner of the Search Results pane Tags and other information from the Search Results pane is saved for the selected file s Backing up your media libraries Media Manager software automatically saves your library as you make changes so you don t need to tell the application explicitly to save your library as you re working However you can create a backup of the current library as a restore point or as a template to create new libraries 1 Click the Media Library Actions button i and choose Back Up Media Library from the menu The Back Up Media Library dialog is displayed 2 Choose a drive and folder from the Save in drop down lis
368. ng to VST instruments 146 Soft Synth Properties window 23 Soft synths Deleting 147 Routing MIDI tracks to 148 Soloing Mixer controls 148 Tracks 19 49 Splitting events 64 At the cursor position 64 Multiple events 65 One event 65 Within a time selection 66 Start offset 70 Streaming media commands 91 Stretching properties 115 119 Subtags 79 Summary properties tab 35 Surround 209 220 Automating panning 217 219 Hardware setup 210 Keyframes 217 219 LFE channel 209 211 Panning 213 Rendering 220 Surround Panner window 23 214 Sync preferences tab 236 Synchronizing audio and video 205 Sysex keyframes 185 System requirements 15 T Tagging media files 77 Tags Applying to media file 77 Arranging in the tag tree 79 Creating 77 Creating palettes 79 Deleting from library 78 Editing names or images 79 Removing from library 78 Removing from media file 78 Saving to media files 80 Subtags 79 Viewing palettes 79 Takes Recording audio as new 157 Tempo changes Marker 97 Project 96 Temporary files 37 239 Time Fitting projects to time 99 Inserting into projects 99 Time display 226 Time markers 90 Time ruler 21 223 Time selection Recording into 158 Splitting 65 Time signature changes Marker 97 Project 96 Timecode synchronization 201 202 Tips and tricks 261 267 Toggle automation mode 259 Toolbar 17 224 226 Track automation 1
369. nloaded to the folder specified in the Destination box oS oS When you are finished downloading close the Get Media from the Web dialog The file is added to your project Click Show Details to display additional information about your download In this mode you can add files to a download queue specify where the downloaded files should be stored and monitor the progress of your downloads Click Start to begin downloading queued files or click Hide Details to return to basic mode Understanding clip types When you add media to a project a new track is created for the file Depending on the type of media you add one of four clip types is created to accommodate it loop one shot Beatmapped or MIDI You can identify a track s type by looking at the paint clip selector icon in the track header For more information see Using clips with tracks on page 107 Loops Loops are small chunks of audio that are designed to create a continuous beat or pattern when played repeatedly They are usually one to four measures long Loops are the type of file that you will use most frequently One shots One shots are chunks of audio that are not designed to loop and they are streamed from the hard disk rather than stored in RAM if they are longer than three seconds Things such as cymbal crashes and sound bites could be considered one shots Unlike loops one shots do not change pitch or tempo with the rest of a project Beatmapped When you add a
370. nonyms and variant spellings will be resolved automatically If you need to modify the pattern matching you can edit the AutoTagPatterns xml file which is created in yourMy Documents Sony Media Libraries folder the first time the application starts Note Changing the selection of the Add tags and custom properties from files and Use file and folder names to apply tags automatically check boxes also changes the settings in the Media Manager Options dialog 9 Click the Search button to start adding files to the library 10 Click the Close button when your re finished A tag is automatically added to the tag tree when you search The tag name will include the date and time of the search and all files that were added or updated in the library are marked with this tag 76 Chapter 4 Removing media files from a library You can remove a reference to a media file from a library without affecting the media file itself 1 Select files in the Search Results pane to choose the files you want to delete e To select a single file click the file or e To select multiple consecutive files click the first file hold the Shift key and then click the last item or e To select multiple files that are not consecutive hold the Ctrl key and click each file 2 Right click a selected file and choose Remove from Library from the shortcut menu or press the Delete key on your keyboard A confirmation dialog is displayed 3 Click OK t
371. nternet Explorer version 5 1 is included on your CD ROM INTRODUCING ACID SOFTWARE 15 16 Chapter 1 E ACID Pro Online Help Hek Toolbar go e Hide Back Print Options Glossary Shortcuts Tabs py Contents Index Search Favorites Introduction The ACID Window Using ACID Customizing ACID Software Keyboard Shortcuts Signal Flow Diagrams Troubleshooting Glossary ACID Pro 6 Professional Music Workstation Copyright 2006 Madison Media Software Inc a subsidiary of Sony Corporation of America All Rights Reserved Revised February 2 2006 ACID Pro 6 software is ideal for all types of music production composing recording mixing and arranging Its unique fusion of professional power and exceptional ease of use sets ACID Pro 6 software apart from all other digital audio workstations With multitrack audio technologies comprehensive MIDI sequencing and legendary ACID looping functionality ACID Pro 6 software will redefine the way you make music Information pane New features Ub Multitrack audio and MIDI recording Input monitoring for audio recording Multiple media clips per track including copy and paste of events between tracks Automatic crossfades between overlapping events MIDI editing on the timeline Mi rack envelopes and keyfran and keyframes for continuous controller program change and VSTi parameter automation Processing and filtering for
372. o SAO 100 i Center Le MICI Input In USB Revstation e Auto Input Uses automatic input routing The focus track will accept input from any MIDI device Input Off as Turns off MIDI input to the track e Hardware Input Port List Displays the devices that are selected in the Make these devices available for MIDI input list on the MIDI tab of the Preferences dialog Choose the specific device you want to use to send MIDI to the track Note You must choose a specific input port to use MIDI input filters For more information see Configuring MIDI input filters on page 179 Soft Synth Input Port List Displays the available soft synths in your project Choose the soft synth you want to use to send MIDI to the track For more information see Using soft synth controls on page 144 Choose Soft Synth sh from the Insert menu and select a soft synth for your project from the Soft Synth Chooser dialog You can also select Insert Soft Synth from the Mixer 3 Choose a MIDI input channel Click the MIDI Input button on the track header e Choose MIDI Channel from the menu and choose the MIDI channel you want to send data to the track or choose All if you want the track to listen to all channels Tip fyou want to select multiple input channels hold Ctrl and select additional channels from the MIDI Channel submenu 4 Click the MIDI Input button on the track header and choose Send MIDI Input Thru to MIDI Output
373. o make room for additional busses assignable effects and soft synth controls To hide the Preview fader right click within the Mixer window and choose Show Preview Fader from the shortcut menu The fader remains hidden until you choose Show Preview Fader from the shortcut menu again Adjusting split faders in the mixer Split faders allow you to adjust the levels of the left and right channels independently To move the faders individually drag the fader for the desired channel and release the mouse when it is in the correct position However you can adjust both channels simultaneously by doing either of the following e Drag in the middle of the fader while making your adjustment e Click the Unlock Fader Channels button before adjusting the fader You can also change the fader level by double clicking e Double click the fader to reset it to 0 0 dB If you have set each channel differently double click either channel to match the remaining channel to its level Changing meter resolution You can select the meter resolution This is useful when building a project from several media source pools that have varying volume levels To change the resolution right click a meter and choose the desired resolution from the shortcut menu Note Changing the meter resolution of one fader automatically changes all other meters in the mixer to match the selected resolution Adjusting for clipping The volume of certain media files may caus
374. o remove the selected files from the library Tagging media files Tagging helps you classify your media files For example if you wanted to keep track of loops played by a specific instrument you could create a tag with the name of the instrument and apply it to the appropriate loops Similarly you could create tags for genres moods seasons client names locations scenes performer names and so on When you create a new library a default tag tree is displayed in the Tags pane You can create your own tags to customize the tags for your needs Tags are the fastest way to search a media library and they require very little disk space Tags are saved in your media library If a media file exists in multiple libraries tagging the media file in one library has no effect on the other libraries unless you save the tags to the files and use the Add Files to Media Library dialog to update tags and custom properties for all files Tip f you want to see which tags are associated with a file as you re adding or removing tags drag the Tags column in the Search Results pane to the left so you can see the Name and Tags columns at the same time Creating a tag Adding tags creates new tags in the current library only 1 Click the Add Tag button 1 to add a new tag to the tree If a tag is selected the new tag will be added below the selected tag If no tag is selected the new tag will be added to the bottom of the tag tree Type a name for
375. of oe iF Chain Untitled x oly Flange wWah wah Y Distortion bo Preset Untitled x SONY E Effect Flange Phaser C wah wah Inf 0 0dB Tempo sync Pet iog Rate 0 001 to 20 0 Hz 10 00 Depth 1 to 100 10 fi Dry out Wet out tad Inf to 12 dB Inf to 12 dB 2 There are two ways to arrange plug ins in your chain e Drag the plug in to a new location in the chain e Right click the plug in and select Move Left or Move Right from the shortcut menu 3 Click the Close button XI to close the Audio Plug In window Bypassing plug ins on plug in chains You can bypass a plug in without removing it from the chain by clearing the check box on the plug in Alternately right click the plug in and choose Bypass from the shortcut menu c Graphic EG Tip To bypass or re enable all plug ins in a chain right click the FX button t on the mixer control and choose Bypass All or Enable All Removing plug ins from chains You can remove a plug in from a chain at any time 1 Click the FX button 4 on the mixer control The Audio Plug In window appears 2 Right click the plug in and choose Remove from the shortcut menu or click the Remove Selected Plug In button 3 Click the Close button Xl to close the Audio Plug In window Removing or bypassing all effects on a mixer control You can clear a mixer contr
376. of the spectrum A groove refers to the rhythmic pattern of a piece of music By deviating from a machine quantized beat individual beats may be played early or late to change the feel of the music Applying a groove can simulate the timing patterns of human musicians lending a human feel to MIDI generated music or quantizing several distinct pieces of music to a common timing The unit of measurement for frequency or cycles per second CPS An in place plug in processes audio data so that the output length always matches the input length A non in place plug in s output length need not match a given input length at any time for example Time Stretch Gapper Snipper Pitch Shift without preserving duration and some Vibrato settings can create an output that is longer or shorter than the input Plug ins that generate tails when there is no more input but otherwise operate in place such as reverb and delay are considered in place plug ins Sections of silence between selections that you can create using the Chopper and insert into the track view The insertion point also referred to as the cursor position is analogous to the cursor in a word processor It is where markers or commands may be inserted depending on the operation The insertion point appears as a vertical flashing black line and can be moved by clicking the left mouse button anywhere in the track view Loops are small audio clips that are designed to create a repeating
377. of the timeline Use the zoom controls in the lower right corner of the timeline or hover over the timeline and roll the mouse wheel forward or back to zoom in or out Audition notes with the keyboard drum grid You can use the keyboard drum grid between the track header and timeline to audition the track s MIDI output or record MIDI When you click the keys the note is played using the appropriate patch at the cursor position These buttons are velocity sensitive clicking toward the right side of a button plays the note with a higher velocity setting than clicking toward the left side A Bottle Blow Sell the Sizzle S B II Bottle Blow i ter Touch ee ter Touch TE Clicking toward the right side of the keyboard or Clicking toward the left side of the keyboard or drum list plays the note with a higher velocity drum list plays the note with a lower velocity 0I n Audio driver latency can limit your ability to preview DLS voices in real time Using low latency drivers will produce the best results Selecting notes WORKING WITH MIDI 169 170 Chapter 11 Selecting individual notes notes from the selection Selecting groups of notes draw three types of selection boxes Free selection The default behavior of the tool Click to select individual notes hold Shift or Ctrl to select multiple notes Drag to draw a rectangular region that begins where you start drawing and ends where you re
378. oints 132 Adjusting 132 Changing fade curves 134 Color preferences 238 Deleting points 133 Drawing points 132 Envelope tool 134 Event 71 Flipping 133 Mixer controls 152 Thinning points 133 Track 113 136 Track envelopes 132 135 Volume track 132 Equipment setup for recording 155 156 Basic 155 Mixer 155 With digital multitrack 156 With MIDI option 156 Erasing events 43 263 Event takes Recording audio as new 157 Events Automatic crossfades 66 Changing a clip 109 Changing length 43 Changing pitch 98 Copying 61 Copying across tracks 108 Cutting 63 67 Deleting 63 68 Editing in ripple mode 67 Envelopes 71 Erasing 43 Fading edges for offsets 71 Fading in and out 71 Inserting at the play cursor 42 Joining 66 MIDI editing 43 Moving 43 Painting 41 Pasting 61 69 Pitch shifting 71 Properties 70 Recording into 158 Reversing 63 Sections 72 Selecting 44 46 Shifting the contents of 70 Sliding 70 Slipping 70 Slip trimming 70 Snapping 94 Splitting 64 Start offset 70 Trimming 63 Volume 71 Explorer window 36 38 Exporting loops 126 Exporting MIDI 203 External Control amp Automation Preferences 239 External devices Playing MIDI from 197 Routing busses to 141 Routing MIDI tracks to 196 Routing video to 207 External effects Mixing 141 External monitor 207 Extracting media from CD 38 Faders Mixer 52 148 Fading edges of events 71
379. ol of all effects by right clicking the FX button 4 and choosing Delete All from the shortcut menu You can bypass the effects on a mixer control without removing them by right clicking the FX button 8 and choosing Bypass All from the shortcut menu To apply them again right click the FX button and choose Enable All from the shortcut menu Saving plug in chains as packages You can save plug in chains as packages so that you may re use them in other projects If you use a combination of plug ins often saving them as a package saves you time Effect packages retain their chain order and individual plug in settings You may save plug in chains as packages from existing plug in chains or in the Plug In Chooser dialog during the actual creation of the chain The plug in chains that you save as packages appear in the Plug In Chooser dialog in the Packaged Chains folder 1 Click the FX button 8 on the mixer control The Plug In Chooser dialog appears if a plug in chain does not already exist To save an existing chain click the FX button 4 to open the Audio Plug In window and skip to step four Add and arrange plug ins to create a plug in chain and click OK In the Audio Plug In window adjust the settings for each plug in to achieve the effect you want For more information about effect parameters click the Plug In Help button in the Audio Plug In window Click the Save Chain Preset button E The Save Plug In Package dia
380. ol surfaces Preference Smooth and thin automation data after recording or drawing Set controls to default values when automation is turned off Available devices Active control devices Default all Description When recording automation or drawing envelope curves ACID software creates as many envelope points or keyframes as possible to represent your control movements Select this check box if you want to reduce the number of envelope points keyframes after recording or drawing is finished For more information see Recording automation settings on page 137 For more information see Adding effect automation envelopes on page 130 Select this check box if you want controls to return to their default values when set the track s automation recording mode to Automation Off Automated effect parameters do not have default settings and will retain their last set values when you turn automation off When the check box is cleared controls will retain their last set values when you turn automation off Choose a device from the drop down list and click Add to choose the control surfaces that will be available to ACID software Adding a device loads its default profile For information about configuring specific MIDI controllers see Setting up a Mackie Control Universal on page 242 Using a Frontier TranzPort on page 256 or Configuring a generic MIDI controller on page 258 Lists the control devices that you ve added Double clic
381. old Ctrl or Shift while clicking a track header to select multiple tracks e If you want to edit multiple events on multiple tracks hold Ctrl or Shift while clicking the events to select them and then select the tracks e Ifa selected event has note events selected only the selected notes will be edited Note Muted tracks will not be edited 6 Click the Apply button Editing duration 1 From the Edit menu choose MIDI Processes and Filters The MIDI Processes and Filters dialog is displayed 2 Select the Duration tab 3 Select a radio button to indicate how you want to change a note duration Item Change by Scale by Description Select this radio button and then choose a setting from the drop down list e Setting duration to Allows you to set notes to a specific duration Click the down arrow next to the selected note size and choose the desired note duration from the menu Choose User size to type a duration in beats ticks in the edit box for example type 2 000 for two beats or type 0 200 for 200 ticks e Adding to duration Allows you to add a constant value to existing note durations Click the down arrow next to the selected note size and choose the amount you want to add to notes e Subtracting from duration Allows you to subtract a constant value from existing note durations Click the down arrow next to the selected note size and choose the amount you want to subtract from notes Select t
382. omatically align to these designated snap points e Cursor position e Grid lines e Markers e Regions start and end points e Loop region time selection in and out points You may turn on snapping for these elements in the project or limit snapping to grid lines Choosing snapping options If the snap function is preventing you from placing an event precisely where you want it you may turn snapping off Turning off snapping prevents events from automatically aligning to the cursor grid lines markers regions and time selections The Options menu allows you to toggle snap functions The button image next to the Enable command indicates when snapping is turned on The button image next to the Grid Only command indicates the type of snapping in use Options E y Fa Enable F lt Select to turn all snapping on off Grid Spacing Fil cridony cereFe Select to toggle between snapping to grid lines only and snapping to all elements Tip You can temporarily suspend snapping while dragging by holding down the Shift key Turning snapping on and off You may turn snapping on and off in one of the following ways e Click the Enable Snapping button on the Toolbar e From the Options menu choose Snapping and choose Enable from the submenu e Press F8 Snapping to grid lines With snapping turned on you may choose to snap only to grid lines From the Options menu choose Snapping and choose Grid Only from the submenu The button im
383. omputer ID it is important that you have the ACID application installed on the computer where you will be using it The Computer ID is automatically detected and provided to you when you complete the installation process The Computer ID is used for registration purposes only It doesn t give Sony access to any personal information and can t be used for any purpose other than for generating a unique activation number for you to use the software Mixing two pieces of audio by fading one out as the other fades in DC offset occurs when hardware such as a sound card adds DC current to a recorded audio signal This current results in a recorded wave that is not centered around the zero baseline Glitches and other unexpected results can occur when sound effects are applied to files that contain DC offsets Decibel dB Device Driver Digital Rights Management DRM Digital Signal Processing DSP DirectX Downbeat Downloadable Sound DLS Drag and Drop Dynamic Range Envelopes Equalization EQ Event File Format Frame Rate A unit used to represent a ratio between two numbers using a logarithmic scale For example when comparing the numbers 14 and 7 you could say 14 is two times greater than the number 7 or you could say 14 is 6 dB greater than the number 7 Where did we pull that 6 dB from Engineers use the equation dB 20 x log V1 V2 when comparing two instantaneous values Decibels are commonly used whe
384. on has been specified in both places To view this information during playback choose Now Playing Options from the Windows Media Player View menu and select the items you want to display Command Player Type Description Copyright RealMedia Displays the entered copyright information when a user selects About this Presentation from the RealPlayer shortcut menu or Properties from the Windows Media shortcut menu Note When rendering Windows Media files copyright information is based on the settings on the Summary tab of the ACID Project Properties dialog or the Index Summary tab of the Custom Template dialog The summary information from the Project Properties dialog will be used if information has been specified in both places To view this information during playback choose Now Playing Options from the Windows Media Player View menu and select the items you want to display HotSpotPlay RealMedia Allows you to define an area in the RealPlayer video display that users can click to jump to another RealMedia file HotSpotBrowse RealMedia Allows you to define an area in the RealPlayer video display that users can click to jump to a Web page that you specify HotSpotSeek RealMedia Allows you to define an area in the RealPlayer video display that users can click to jump to a point in the current RealMedia file Defining HotSpot commands Hotspots are defined using the following parameter syntax HotSpotPlay MM SS LEFT TOP RIGHT BOTTO
385. on see Cursor placement loop region and time selection commands on page 25 Positioning the cursor with the Go To command The Go To command is used to place the cursor at a specific location in the ACID project e Press Ctrl G to position the cursor based on the position displayed on the beat ruler Specify a position in measures beats ticks format in the box that appears in the time display and press Enter 00 01 26 649 15 1 000 e Press Shift G to position the cursor based on the time displayed on the time ruler Specify a time in the box that appears in the time display and press Enter 00 01 26 649 15 1 000 Tip You can also open the boxes in the time display by double clicking the desired value Making selections You must select events before you can move or edit them Selecting an event 1 Click the Draw Tool button Z 2 Click an event The event is highlighted event Selecting multiple events You have several methods of selecting multiple events e Press Ctrl or Shift while clicking events Use the Select All on Track command Use the Select Events to End command Use the Select All command Use the Selection tool Note Unless stated otherwise selections can only be made using the Draw tool Selecting multiple events using the keyboard and mouse Holding Ctrl while clicking events allows you to select multiple nonadjacent events that reside on any track This method is useful when
386. ontrol Universal 0 ccc cece cece e eee e eee e eee eaaes 242 TABLE OF CONTENTS 11 Connecting the Mackie Control Universal ccc cece cece cece cece eee e teen eeeeeeaes 243 Configuring the software to use the Mackie Control Universal c cece cece eeees 243 Configuring channel mappings for Mackie Control Extenders cc cece e eee e eens 244 Configuring or customizing Control MAPPINGS ccc cee eee eee teen eee eeeeenes 245 Using the Mackie Control Universal ccc ccc ccc ccc eect eee ee eee eee eeeeeees 246 Channel SECTION separa cass nni riir ee ae ae eae oe cating ooo a us tals Wee ewe 4 od ean es 246 Footswitches not SHOWN ccc ccc cece eee nee eee eee e eens teen ee eeeees 247 COMSIOFDUTIONS eena EAE EE EE awiee can eau aude ere uima wes ee eeune 247 Fader Banks buttons ya4ciwe0duasnuecewacers dee iae Miao santeaedenes eaeaunseedteesaweeanast 249 DISA OUIIONG EA EE E E econ E E E occa aun seoeuya E E 249 Markere DURONS ernir EE EEE A E E E E EE EET AET 250 Add New DUTOS a scsciridticsiitrnidiee siii A an ya Geko as ened ena nteee eee kaneeesmste 250 WV ITAGOWS IEC ONS eae craig aoe E E dan oe lea Ae age vee een aa eda ome A 251 MIGW DUNO 2505 iE esasienoacdeuianeesaunsenianganecnossanoens auewooseueaunweese 251 MIOGITICIS DULIONS perse rrr rere Er RAE IREE EE OE EEEIEE EEA ETARTE RA 252 Audio Video DUTIONS serstrrras reir ras noisa EERTE OEN AEREE EEN 252 Proje
387. ontrollers from the menu The Track Properties dialog is displayed 2 Onthe Output Settings tab choose Voices from the drop down menu Track Properties Output Settings Input Filters Clip Pool Voces w Voice Group Fiano w Patch F Piano 1 F Piano 1 F Piano id F Piano 2 Group Prog MSB LSB A Fiano Oo 0 Fiano 5 0 Piano 0 16 o I Fiano 1 0 0 WORKING WITH MIDI 177 3 Choose the voice you want to use Note You can also set the track voice by doing the following e Double click the MIDI track icon to open Track Properties dialog On the Output Setting tab choose Voices from the drop down menu e Click the Program button choose Select Program Change and then choose Voices from the drop down menu Changing the track voice 1 Click the Program button M 2 Choose a program from the menu or choose Select Program Change to display the Output Settings tab in the Track Properties window where you can select a patch If the track does not contain program change keyframes the selected patch is used to play the entire track If the track contains keyframes the selected patch is assigned to the keyframe that occurs before the current cursor position Note You can also select drum maps by doing either of the following e Double click the MIDI track icon to open Track Properties dialog On the Output Setting tab choose Drum Map from the drop down menu e Click the Program bu
388. ooltip indicating the name of the envelope renidi Aa di Track Track EG Bandi Gain Bandi Gain Adding envelope points After you have inserted an envelope you can add envelope points to control the level of signal or amount of panning at specific points in time 1 Place the mouse pointer on the envelope line The envelope cursor Ep appears 2 Add an envelope point in one of the following ways e Double click the envelope e Right click the envelope and choose Add Point from the shortcut menu Tip f you add too many points you may delete a point by right clicking it and choosing Delete from the shortcut menu You may also clear all envelope points by selecting Reset All from the shortcut menu Drawing envelope points To create an envelope quickly you can draw freehand envelope curves in the timeline 1 With the Draw 4 Envelope 4 or Time Selection tool active hover over an envelope 2 Hold Shift and then click and drag over the envelope As you drag a trail of envelope points is created 3 Release the mouse button when you re finished drawing If the Smooth and thin automation data after recording or drawing check box is selected on the External Control and Automation tab of the Preferences dialog the number envelope points will be reduced when you release the mouse Unthinned envelope Thinned envelope Thinning envelope points Thinning envelope points decreases the number of
389. oops 105 266 Command markers 91 Configuring input filters 179 Connecting a control surface 241 Connecting a Mackie Control Universal 242 Constant power panning model 114 216 Control surface setup 239 Control surfaces 241 Frontier TranzPort 256 Generic MIDI controller 258 Mackie Control Universal 242 Controller envelopes 183 Copying Events 61 Tracks 47 Copying sections 73 Creating drum maps 200 Creating patch maps 198 Cursor 43 46 226 Cutting Events 63 In ripple mode 67 Tracks 47 Deleting Assignable effects 144 Audio from a video 205 Busses 142 Envelope points 133 Events 43 63 In ripple mode 68 Soft synth controls 147 Tracks 47 Video 205 Deleting notes 170 Deleting sections 73 Detuning tracks 261 Digital multitrack setup 156 Display preferences 238 DLS sets Changing patches 145 Routing tracks to 148 196 Using 145 Docking windows 222 Downloading media from the Web 40 Drawing events 41 Drum grid 168 Drum map 168 Drum maps 200 Duplicating tracks 47 DVD burning 220 Editing clip properties 115 Editing drum maps 200 Editing MIDI 167 Editing MIDI events 43 Editing patch maps 199 Editing preferences tab 234 Effects Assignable 149 Automating 113 136 Bus 149 Managing effects 151 Preset Manager 151 Project 149 Saving plug in packages 112 151 Saving presets 111 149 Soft synth 149 Track 110 113 Envelopes 132 135 Adding p
390. oose Copy from the shortcut menu to copy the current selection to the clipboard You can then use the Paste command to insert the selection in the track view After the event is pasted the cursor advances to the end of the pasted event Note When you paste a selection from the Chopper to the track view the increment setting is ignored Dragging selections You can drag a Chopper selection from the Chopper to the track view Release the mouse at the location where you want to insert the selection Moving the insert position in the track view Click the Move Track View Cursor Left button CE and the Move Track View Cursor Right button E to move the current insert position in the track view left right by the increment length Saving Chopper selections as new files You can quickly create a new loop by making a selection in the Chopper and saving the selection as a new file The file is added to your project as a new track 1 Make a selection in the Chopper 2 Right click the selection and choose Chop to New Track or Chop to New Clip from the shortcut menu The Chop to New dialog appears Tip You can also drag a selection from the Chopper to the track list 3 Inthe File name box enter a name for the new file USING THE CHOPPER 105 106 Chapter 6 From the Save as type box choose a file format for the new file 5 From the Template drop down list choose a template for rendering the file or click Custom to create custom re
391. oose an input device from the submenu For example by assigning an input device you can choose which controller you want to use to play a MIDI device When you assign an input device to a MIDI output port the device name is displayed in the Device column in the appropriate row in the Make these devices available for MIDI input list If you want an output device to receive MIDI thru data from an input device right click the MIDI Thru From column and choose a device from the shortcut menu When you choose a MIDI Thru From device the device name is displayed in the Device column in the MIDI Thru To column in the Make these devices available for MIDI input list Select the check box for each MIDI device that you want to be available for recording MIDI pg 164 and controlling soft synths pg 197 To assign an output port to an input device right click the Device box choose Output from the shortcut menu and then choose an output device from the submenu If you want a MIDI input device to echo its MIDI data to an output device right click the MIDI Thru To column and choose a device from the shortcut menu You can select multiple devices to send MIDI thru data Item Description Auto MIDI input routing Select the check box if you want to automatically route MIDI input devices to the soft synth that was viewed last in the Soft Synth Properties window The Solo Listen to MIDI Input button in the Soft Synth Properties window is un
392. op when you release it The current setting is displayed in the Mackie Control display Footswitches not shown The Mackie Control has two switched inputs labeled User Switch A and User Switch B that you can use to connect footswitches By default footswitch A toggles playback and footswitch B starts and stops recording You can customize the footswitches in the Configure Mackie Control dialog Double click Mackie Control in the Active control devices list on the External Control amp Automation tab of the Preferences dialog to display the Configure Mackie Control dialog For more information see Configuring or customizing control mappings on page 245 Control buttons The buttons in the Control section determine the operation of the V Pots and faders in the channel section of your Mackie Control In every mode the fader adjusts track volume and the V Pot adjusts the selected control mode You can press the Flip button to reverse the V Pot and fader function MACKIE i i i 2 3 y 5 G 7 i 189000002 eC ee 4 5 6 Item Description 1 Output Press the Output button to set the output device for each track or bus Turn the V Pot in the channel section to choose an output device and press the V Pot to select it 2 Input Press to set the recording input device for each track Turn the V Pot in the channel section to choose an input device and press the V Pot to select it 3 Pan Press to adjust track pannin
393. or press Ctrl M The Render to New Track dialog appears 3 Complete the Render to New Track dialog e From the Save in drop down list choose the location where you want to save the new media file e Enter a name for the track in the File name box e From the Save as type drop down list choose a file format e From the Template drop down list choose an audio format from the template list or click Custom to create custom rendering settings Note f you want to downmix a 5 1 surround project choose a stereo rendering format Select the Render loop region only check box if you want to render only the loop region to the new mixed down track Clear the check box to render the full length of the project 4 Click Save The time selection or project is mixed down to a new track and a copy of the file is saved in the folder specified As the tracks are being mixed down a status bar appears in the lower left corner of the ACID window Maba E Chopper lt Explorer HE Rendering New track 2 way t Cancel button After the new track is mixed down it appears at the bottom of the track view If you mixed down the entire project you may delete or mute the other tracks from the project as they are all contained on the new track Tip You may cancel the rendering process by clicking the Cancel button on the status bar 5 Use the Draw E tool to paint the waveform on the new track Exporting loops From the File
394. ormation see Placing files in the Chopper on page 102 3 Select athree beat section of audio to be used for the new loop Use the Chopper s transport bar to preview the new loop 4 Right click the selection and choose Chop to New Track from the shortcut menu Alternately press Ctrl M The Chop to New Track dialog appears Tip You can also drag a selection from the Chopper to the track list 5 Complete the information in the Chop to New Track dialog and click Save The selection is saved and the file is added as a 3 4 loop to a new track in the project For more information see Saving Chopper selections as new files on page 105 Chopping multiple files into a new loop Want to combine short segments of several loops into a new loop You can use the Chopper to chop segments from several files into new loops and then combine the new loops into a single loop 1 Place a file in the Chopper For more information see Placing files in the Chopper on page 102 Select audio in the Chopper and press Ctrl M to chop the audio to a new loop Repeat steps one and two for as many loop segments as you want Draw events on the new tracks to create a new melodic or rhythmic pattern ee Select the new tracks and from the Tools menu choose Render to New Track to render the tracks to a single track The Render to New Track dialog appears 6 Complete the information in the Render to New Track dialog and click Save For more information see Mix
395. ormation see Using the Audio Device tab on page 230 Button Description This button appears when Use Microsoft Sound Mapper has been selected as the audio device type on the Preferences Audio tab The Sound Mapper allows you to choose how the signal will be Monoleft recorded stereo or mono Click this button to view a menu with Stereo Left or Right hl Stereo 4 Mono right 1 Stereo This button appears when the Windows Classic Wave Driver or an ASIO device has been selected as the audio device type on the Preferences Audio Device tab When you choose this option you can iL Monoleft specify which device e g sound card you will record from on any given track prior to recording Click this button to view a menu with Stereo or Mono and a submenu with all available devices for either in Mono right option Selecting recording settings After the track has been armed for recording select whether the track records the signal in stereo in mono from the left channel or in mono from the right channel If you are using the Microsoft Windows Classic Wave Driver or an ASIO device you also must select the device from which the track will record Selecting recording settings for Sound Mapper 1 Click the Record Device Selector button 4 A menu appears 2 From the menu choose the recording method Stereo Left or Right m Bass Gra p e F iy amp 02 36 847280 o Stereo P vol 6 0 dB I Left sai
396. ormation about the selected file and a link you can use to purchase the media Using the Sony Sound Series Loops amp Samples reference library If you have the Sony Sound Series Loops amp Samples reference library loaded when you search your computer for media media from existing Sony Loops and Samples or Loops for ACID collections will inherit tags and custom properties from the reference library The Sony Sound Series Loops amp Samples reference library is not installed by default but you can install it from the ACID CD or download it from the Sony Media Software Web site http mediasoftware sonypictures com reference After installing the library go to the Media Manager Options dialog click the Media Library Actions button dl and choose Options from the menu and choose the reference library from the Reference library drop down list Searching for media files You can use the Media Manager tool to search the current media library for media files using keywords or tags Tips You can use the Search Results Limit box in the Media Manager Options dialog to determine the maximum number of media files youd like to have returned in the results of your searches Increasing the Search Results Limit setting increases the amount of time required to search a library and can significantly decrease performance if set excessively high When performing complex searches consider creating temporary tags to classify the results If you apply
397. ottom of the Piano Roll Editor tab drag to draw your controller information 9 Controller 127 36 ga a T E ee a paan D Spe y ET E r A E o a A 4 jt C gt gt ll K H ag Selecting note events With the Draw tool selected you can select individual note events by clicking them You can also use one of several methods to select multiple events e With the Draw tool selected press Ctrl or Shift while clicking note events Pressing Shift allows you to select the first and last note events of a range in order to select all notes in between while pressing Ctrl allows you to select non contiguous note events e Click the Selection Tool button and drag across note events you wish to select e Press Ctrl A to select all note events on a track Moving note events After you select note events you can drag them to new positions Tip Press Alt while dragging note events to restrict your movement to vertical change pitch or horizontal change location in time Using cut copy and paste After you select note events you can click the Cut or Copy buttons to cut or copy the events You can then position the cursor in a new location and click the Paste button E to paste the events Note events are always pasted at the same pitch as the original note event Toggling note snapping Click the Enable Snapping Notes to Specified Scale button Eg to toggle snapping If the button is se
398. ou have ACID you can use the powerful Media Manager feature to locate catalog and add media files to your ACID projects Within the Media Manager window you can build media libraries of your media that include file attributes ACID metadata and tags that you can assign to classify your media You can also search for purchase and access reference libraries from outside sources to build your media file base Display the Media Manager if needed by choosing Media Manager from the View menu or by pressing Alt 5 For more information on the Media Manager feature see Using the Media Manager on page 75 Adding media files from the Open dialog There are three ways to add media files from the Open dialog e Select the desired file and click Open e Right click the selected file and choose Select from the shortcut menu e Double click the selected file Adding media files from outside the application You can also add a media file to a project by dragging it from Windows Explorer to the track view Adding multiple media files simultaneously To add multiple media files to the project Ctrl click or Shift click to select the files and drag them to the track view or the track list Extracting media files from CD You can extract 44 100 Hz 16 bit stereo data from CDs Extracted CD tracks are added to new tracks in your ACID project 1 Insert a CD in the CD ROM drive 2 From the File menu choose Extract Audio from CD The Extract Audio from
399. ou plan to use a command more than once you can save command properties as a template You can then reuse the command properties by selecting the template from the Template drop down list WORKING IN THE TRACK VIEW 91 92 Chapter 5 1 Create a command and complete the Command Properties dialog 2 Click in the Template box and enter a name for the template 3 Click the Save Template button B Tip Your metadata command templates are saved in the cmdtemp xml file in the ACID program folder You can edit this file directly to modify your templates Defining streaming media commands In a streaming media file command markers can be used to display headlines show captions link to Web sites or any other function you define Several command types are included that you may add to a streaming media file Some command types are exclusive to either the Windows Media or the RealMedia file types Command Player Type URL Windows Media and RealMedia TEXT Windows Media WMClosedCaption Windows Media WMTextBodyText Windows Media WMTextHeadline Windows Media Title RealMedia Author RealMedia Description Indicates when an instruction is sent to the user s Internet browser to change the content being displayed With this command you enter the URL that displays at a specific time during the rendered project s playback Displays text in the captioning area of the Windows Media Player located below the video display area
400. ount of silence is inserted following the selection when you insert it in the track view This affects the track s insert position and allows you to paint selections separated by the specified increment Increment greater than selection Selection inserted with specified increment three times When the increment length is less than the length of the selection the selections are overlapped as you insert them in the track view sass Increment less than selection Selection overlaps when inserted three times Creating increments 1 Verify that the Link Arrow to Selection button al is toggled off and the increment arrow is displayed in black 2 Drag the point of the arrow to configure an increment of the desired length Tip While dragging the increment arrow the Chopper s middle status value temporarily displays the length of the increment Creating increments of a specific musical length The increment shortcut menu like the selection shortcut menu allows you to create increments that correspond to the specified musical length 1 Verify that the Link Arrow to Selection button a is toggled off and the increment arrow is displayed in black 2 Right click the increment arrow and choose the desired musical value from the shortcut menu The increment length is automatically configured to the selected value in both the Chopper and the track view Creating increments of a custom musical length 1 Verify that the Link Arrow to
401. ove in the Groove Pool window 2 Click the Remove Selected Grooves from Project button x The selected groove is removed from your project If the groove is in use a confirmation will be displayed if the Confirm groove deletion when still in use check box is selected on the General tab of the Preferences dialog Creating grooves You can add grooves to your project by using an existing track duplicating existing grooves importing grooves or by creating an entirely new groove from scratch Using Groove Cloning to create a new groove using a track in your project ACID can analyze a clip s audio to extract its groove so you can apply its feel to other clips Note Groove cloning can extract grooves from loop clips only 1 Right click a track header in the track list and choose Paint Clip from the shortcut menu 2 Choose Add to Groove Pool from the submenu A new groove will be added to the Groove Pool window using the name of the clip you selected in step 1 Note Grooves that you create from existing clips will be available only in the project where they were created If you want to make a groove available to other projects export it to a groove file Tip You can also click the Add to Groove Pool button S in the Clip Properties window to add a loop groove to the Groove Pool Duplicating a groove Existing grooves can serve as templates for creating your own grooves 1 Select the grooves you want to duplicate Hold
402. ox will appear asking if you want to delete a groove that is currently in use by the project Item Description Enable Windows XP Theme When this check box is selected the ACID window will inherit the appearance of the support current theme when using Windows XP When the check box is cleared user interface elements will maintain the classic Windows operating system appearance Save media usage relationships in When this check box is selected the Media Manager will save information about active media library media usage so you can perform searches for media relationships You can search for projects that use a media file projects where a media file was previewed media that was rendered with a media file and so on Enable Media Manager requires When this check box is selected the Media Manager will start when you start ACID ACID restart Clear the check box to turn off the Media Manager and prevent it from starting with the application If you re not using the Media Manager you may want to turn it off to conserve processing power or memory Allow snapping for post groove eae pare When this check box is selected groove markers in the Groove Editor will snap to the current grid spacing if snapping is enabled Hold Shift while dragging to bypass snapping press Shift after you click Clear the check box if you do not want groove markers to snap to the grid Check acd file type association at When this check box is sel
403. pand One of the most powerful features of the software is its ability to compress or expand a loop while maintaining the loop s original pitch However you can override this feature in order to produce specific effects in your projects 1 Right click an event and choose Clip Properties from the shortcut menu 2 Click the Stretch tab 3 From the Stretching method drop down list choose Pitch shift segments The clip s pitch will change in relation to the tempo of the project While this may seem like just a way of producing old school effects it actually has practical applications as well For example specifying Pitch shift segments can actually improve the fidelity of drum loops recorded at a tempo near the project tempo In addition overriding the compress expand feature allows you to create great bass grooves by slowing drum loops APPENDIX C 265 266 APPENDIX C Slicing and dicing in the Chopper You can use the Chopper to add creative slice and dice effects to your ACID project Chopping new loops for alternate time signatures The Chopper makes it easy to clone a new loop from a song or sample This feature can be particularly handy when you want to create a loop for a different time signature In this example you ll create a 3 4 pattern from a 4 4 loop 1 Setthe project time signature to 3 4 For more information see Changing project time signature on page 96 2 Place a 4 4 loop file in the Chopper For more inf
404. per tool Also the Preview fader s volume determines the volume of new tracks added to the project unless you have set a default track volume level For more information see Setting default track properties on page 227 This allows you to set up a quick mix while you are adding media to your project A Master bus fader which controls the overall volume Faders for up to 26 project busses when added to the project e Faders for up to 32 assignable effect chains when added to the project e Faders for up to 32 soft synth controls when added to the project The function of the bus assignable effect and soft synth controls are beyond the scope of this chapter For more information see Using the Mixer on page 141 Viewing the Mixer window The Mixer window appears by default when you start the application but you can hide it if necessary To view or hide the Mixer window choose Mixer from the View menu or press Alt 3 A check mark appears adjacent to the command to indicate when the window is displayed GETTING STARTED 51 52 Chapter 2 Using the mixer toolbar The Mixer window toolbar allows you to access project properties add busses and add assignable effects chains to the Mixer Button B ed 4 Spe Insert Faas SD Insert Bus H Insert Soft Synth Description Displays the Project Properties dialog Downmixes your audio from 5 1 surround to stereo or from stereo to mono so you can ensure your mix will
405. perties 4 Click OK Setting ACID preferences From the Options menu choose Preferences to display the Preferences dialog APPENDIX A 227 228 APPENDIX A Using the General tab Item Automatically open last project on startup Show logo splash screen on startup Use Net Notify to stay informed about Sony products Draw contents of events Create undos for FX parameter changes Confirm media file deletion when still in use Close media files when ACID is not the active application Close audio and MIDI ports when ACID is not the active application Enable multimedia keyboard support Automatically render large Wave files as Wave64 Prompt for region and marker names if not playing Create project file backups on save acd bak Preserve pitch for new Beatmapped tracks when tempo changes Automatically start the Beatmapper Wizard for long files Use slower updates to prevent playback clicks during editing Enable autosave Use ASPI for CD burning and extracting Use SPTI for CD burning Autoname extracted CD tracks Keep bypassed FX running to avoid pause on bypass enable Confirm groove deletion when still in use Description Select this check box if you want to reopen the project that was open the last time the software was closed When you clear this check box the software starts with a blank project Select this box if you want the ACID logo splash screen to display upon
406. played Zoom time in out small increments when timeline has focus Zoom time in out large increments when timeline has focus Zoom in time until each video thumbnail represents one frame Zoom track height in out when timeline has focus Change track height for all tracks Minimize restore track height for all tracks Return all tracks to the default height Minimize restore the window docking area Show hide Event Information Minimize restore timeline vertically and horizontally window docking area and track list will be hidden Minimize restore the track list Show Hide bus tracks Description Add selected file or currently playing file to the track list Cursor placement loop region and time selection commands Description Keys Go to beginning of active loop Home region or viewable area if no selection Go to end of active loop region or End viewable area if no selection Description Center in view Move cursor to corresponding marker or select corresponding region Keys F9 Shift F9 Ctrl F9 Up or Down Arrow Ctrl Up or Down Arrow Alt Up Arrow Shift Up or Down Arrow Ctrl Shift Up or Down Arrow 1 Ctrl F11 or Alt Ctrl Shift l Ctrl F11 or Ctril Alt Shift F11 or Shift Alt Keys Ctrl Enter Keys Number keys not Keypad INTRODUCING ACID SOFTWARE 25 26 Chapter 1 Description Keys Description Keys Toggle cursor between beginning Numeric keyp
407. plications you can also route MIDI tracks to ports synths in the ReWire device applications Use the soft synth bus control in the Mixer window to mute solo add effects to and adjust the volume of each soft synth Note f you receive an error that a MIDI port is currently in use when you try to play back your project check the MIDI tab in the Preferences dialog and verify that your ReWire device applications are not trying to access the same MIDI ports ACID is configured to use Adding soft synth controls to projects If you have no external MIDI devices defined a soft synth control is added with a default DLS voice set for you when you add a MIDI track to your project You can add more soft synth controls to a project as needed 1 Click the Insert Soft Synth button Insert Soft Synth in the Mixer window The Soft Synth Chooser dialog appears 2 ToaddaDLS or VSTi soft synth click the Soft Synths tab and choose an available synth from the list To add a ReWire device application in ACID Pro click the ReWire Devices tab and choose an installed device application from the list 3 Click OK Note f the VST instrument you want to use does not appear in the list click VSTi Preferences For more information see Locating VST instruments on page 146 If the ReWire panel application you want to use does not appear in the list see Locating ReWire panel applications for use in ACID on page 153 Modifying soft synth control properties
408. points using the Envelope tool click the track that contains the envelope and drag your cursor in the track view to select the points you want to move Selected points display in an alternate color Click any selected point and drag it to the new position all selected points will follow To deselect the points click anywhere outside the selection Cutting copying and pasting envelope points 1 Select the Envelope tool using one of the following methods e From the Edit menu choose Editing Tool and choose Envelope from the submenu e Click the Envelope Tool button F on the toolbar Click within a track to select it Drag along the timeline to select envelope points From the Edit menu choose Cut or Copy Position the cursor where you want to paste envelope points across a track Se E From the Edit menu choose Paste Copying envelopes to another track 1 Select the Envelope tool using one of the following methods e From the Edit menu choose Editing Tool and choose Envelope from the submenu e Click the Envelope Tool button F on the toolbar Click within a track to select it From the Edit menu choose Select All From the Edit menu choose Cut or Copy Click within a track to select it E E E a Click the Go to Start button H if you want the envelope to appear exactly as it was in the original track or click to position the cursor where you want the envelope to start 7 From the Edit menu choose Paste
409. port the grooves again For more information see Importing a groove on page 123 A groove refers to the rhythmic pattern of a piece of music Groove maps in ACID expand on the software s ability to match the rhythm and timing of files nondestructively and in real time e Breathe new life into your collection of loops and MIDI files by creatively applying grooves to change the rhythmic feel e Adjust the timing of a track to add or remove a human feel e Quantize and map multiple tracks or loops to a common groove e Extract the groove from an existing audio file e Create new grooves from scratch e Different grooves can be applied to an entire track or portions of a track so you can easily match loops with incompatible feels and tighten loosen grooves nondestructively Note Grooves cannot be applied to tracks that contain Beatmapped clips Applying or removing grooves From the View menu choose Groove Pool to toggle the display of the Groove Pool window With the Groove Pool and Groove tool S you can use groove maps to adjust the timing of entire tracks or portions of tracks Tips Ifyou want to get really creative try setting a clip s stretching method to Pitch shift segments on the Stretch tab of the Clip Properties window When a groove adjusts a beat so it plays early the pitch will be raised When a beat is played late its pitch will be lowered Ifa groove map does not seem to work correctly on a loop the beats in the
410. port through which you receive MTC From the Frame rate drop down list choose the frame rate that your trigger device uses to send MTC to ACID 4 From the Options menu choose Timecode and choose Trigger from MIDI Timecode from the submenu When an incoming MTC signal is received playback begins from the position indicated by the timecode If MTC is not being received you can play and edit normally Viewing incoming timecode You can view the incoming timecode in the time display located directly above the track list Right click the time display and choose MIDI Timecode In from the shortcut menu to show the incoming MTC time This display also shows status and error information If Trigger from MIDI Timecode is enabled but no MTC is detected the display reads Waiting lf the wrong frame rate of MTC is being detected the display reads Wrong format Generating MIDI clock MIDI clock differs from MTC in that it contains tempo as well as positional information MIDI clock is essentially measured in ticks from the beginning of the project MIDI clock sends 24 ticks per quarter note The advantage of using MIDI clock is that tempo changes are sent to the chasing application and they will be preserved 1 Specify a MIDI output device to which you will send the clock This option can be found on the Sync tab of the Preferences dialog For more information see Using the Sync tab on page 236 2 From the Options menu choose Timecode and c
411. previously active tool Note Double clicking the Zoom tool adjusts both the horizontal and vertical magnification so that as much of the project is displayed as possible Window docking area This area allows you to keep frequently used windows available while working on a project Windows can be docked side by side or in stacks in the window docking area For more information see Docking and floating ACID windows on page 221 Click the Close button to remove a window from a floating dock or the window docking area EM Media Files a Audio i Landscape 07 waw ElLandsc i Elia Loops and Samples BlLandscape 03 wav i Landsc El Sonic Excursions Fe Ebow vibratior H A Elements eo Introspective P Landscape O4 wav ElLandsc Landscape 05 waw Landsc PJ Landscape O6 way Landsc Landscape OF way Landsc Landscape 08 wav ElLandsc Py Landscape 09 way Landsc Landscape 10 wav ElLandsc Py Landscape 11 wav ElLandsc Pe J The Desert Du JLandscape 12 wav Landsc H Sweet and Low Ba PijLandscape 13 wav JLandsc H Stils 3 H SurroundProjects an Audio Loop 8 beats at 85 0 BPM F Click the Maximize Minimize button to control the size of the window in the window docking area Click the handle to drag a window to a different location or dock k Explorer d Media Manager Groove Pool j Click a tab to view a window The default windows display in the window docking area when you start
412. project tempo changes so that the cursor position matches the selected marker Deleting tempo key time signature change markers To delete a marker right click the marker and choose Delete from the shortcut menu Changing a clip s key You can change the key of a clip on a track without affecting the project s key For creative ways to use track key changes see Detuning paired tracks on page 261 1 Right click the track and choose Properties from the shortcut menu The Track Properties window appears 2 Double click the event you want to edit 3 Onthe General tab of the Clip Properties window enter the number of semitones by which to adjust the key in the Pitch Shift box or use the spinner control Use the minus key for negative values 4 Close the Track Properties window The pitch shift displays in the event lal Riffage oe tox C 7 Ao Pushing if C11 30 0 FH vol 13 1 dB ii Pan Center Lu i 3 C Pitch ik display Tip Another way to change the key of the track is to select the track in the track list and press plus or minus on the numeric keypad Changing an event s key You can change the key of an individual event without affecting the pitch of the track or project Right click the event in the track view choose Pitch Shift from the shortcut menu and choose Up Semitone or Down Semitone from the submenu The pitch shifts one semitone in the direction specified and the amount of s
413. quency for low pass filter Enter a low pass cutoff frequency value for 5 1 surround projects Audio sent to the LFE channel is limited to frequencies lower than the value you enter Applying a low pass filter approximates the bass management system in a 5 1 decoder and ensures that you re sending only low frequency audio to the LFE channel Available only in ACID Low pass filter quality Choose a setting from the drop down list to determine the sharpness of the low pass filter s rolloff curve Best produces the sharpest curve Available only in ACID Start all new projects with these Select this check box if your project requirements do not change or you want settings consistent settings for future projects Opening existing projects 1 From the File menu choose Open The Open dialog appears 2 Choose a drive and folder from the Look in drop down list 3 Selecta file in the browse window or type a name in the File name box Detailed information about the selected file appears at the bottom of the dialog box Choose a file type from the Files of type drop down list to limit the files displayed in the dialog box 5 Click Open Note f one of the media files cannot be located when you open an ACID project you can choose to leave the media offline and continue to edit events on the track The events point to the location of the source media file If you restore the source media file at a later time the project opens normally Opening
414. r Because true stereo panning is used you can introduce clipping when panning a track to the left or right Unlike a left right balance control which simply decreases the volume of one channel the default panning mode actually adds the audio from one channel to the other When panning a track adjust the track volume accordingly You can choose among five panning types to determine how a track is panned For more information see Choosing stereo pan types on page 113 FX With the multipurpose slider you can control the level of the track sent to each of the assignable effect chains that you have created Dragging the fader to the left cuts the volume dragging to the right boosts the volume Bus With the multipurpose slider you can control the level of the track sent to each of the additional busses that you have created for your project Dragging the fader to the left cuts the volume dragging the fader to the right boosts the volume Note When adjusting the mix of your tracks remember to look at the meters on the mixer Because you are adding the volumes of all the tracks together it is easy to clip the audio output Make sure that the meters never display the red clip indicator during playback Muting tracks Each track has a Mute button 9 Clicking this button shades the corresponding track to indicate that it is muted and renders it inaudible during playback Clicking the Mute button a second time returns the track to its or
415. r 43 Select the plug in parameters that You want to automate using track envelopes Frequency Resonance Filter Type Cancel Filter Order Bypass Select All eer Select None 5 Click OK to close the FX Automation Chooser Envelopes display on the track for parameters that you selected in the FX Automation Chooser To control which effect parameter envelope displays on the track click the arrow adjacent to the Track FX button and choose an envelope from the menu A Guitar A 6 Yok 1 5 d8 l l Pan Center LL Hide All F8 Automation Envelopes Fa Sutomation Tip Press E to toggle through the display of all effect parameter automation envelopes Adjusting effect automation settings You can adjust automated effect parameters by editing the envelopes in the timeline or by recording automation with the controls in the Audio Plug In Window If you ve enabled the Bypass parameter for a plug in you can click the Bypass button in the plug in s banner to toggle the Bypass envelope at the cursor position SONY F Note When you automate an effect s frequency parameter such as the frequency parameters in the track EQ effect you may notice that the frequency changes are more apparent when moving through the lower frequencies This is because frequency scales in track EQ and other plug ins use a logarithmic scale but effect automation uses linear interpolation To make the automated
416. r Type 0 MIDI files a separate track is created for each channel in the MIDI file e For Type 1 MIDI files a separate track is created for each track in the MIDI file Recording MIDI You can use an external MIDI controller or the keyboard drum list between the track header and timeline to record MIDI into your ACID project You can record in real time during project playback by using step recording or MIDI merge recording to build MIDI tracks Track level MIDI input filters allow you to control exactly which MIDI messages you want to record or exclude Tip f you use the keyboard drum list between the track header and timeline to input MIDI notes note that the buttons are velocity sensitive clicking toward the right side of a button plays the note with a higher velocity setting than clicking toward the left side The keyboard drum list is visible in inline MIDI editing mode Important Attempting to record MIDI controller data over an existing event will overwrite existing note data If you want to record controllers over an existing event use MIDI merge recording For more information see Using MIDI merge recording on page 166 Setting up a MIDI controller for recording into a track 1 Select the MIDI track you want to record into or press Ctrl Alt Q to add a new blank MIDI track to your project 2 Choose a MIDI input port by clicking the MIDI Input button on the track header Choose a command from the menu Sweet Elyse A BE
417. r device from playing through other soft synths and MIDI thru devices 1 Double click a soft synth icon on a control 4 in the Mixer window The Soft Synth Properties window is displayed 2 Click the Solo Listen to MIDI Input button ET You can select the Solo Listen to MIDI Input button on additional soft synth bus controls to add them to the solo group Note This button is unavailable if the Auto MIDI input routing check box on the MIDI tab of the Preferences dialog is selected or if you have not selected an external MIDI input port Deleting soft synth controls Just as you can add soft synth controls to a project at any time you can also delete superfluous soft synth controls When you delete a soft synth control from a project tracks assigned to it are reassigned to the first soft synth control in the Mixer window To delete a soft synth control right click the control in the mixer and choose Delete from the shortcut menu or select the control and press Delete USING THE MIXER 147 148 Chapter 9 Routing MIDI tracks to soft synth controls If your project contains multiple soft synth controls you can assign each MIDI track to a specific soft synth control To assign a track to a soft synth control click the MIDI Output button on the track header and choose the desired soft synth control from the menu For more information see Routing tracks to MIDI devices or soft synths on page 196 Using mixer controls Altho
418. r to the appropriate output Assigning audio to the LFE channel Once the project is in 5 1 surround mode you must decide whether a track will provide the 5 surround panning or the 1 LFE channel in 5 1 surround Initially all tracks in a surround project are set to provide surround panning but you can assign a track to the LFE channel instead You can assign an individual track to the LFE channel or you can route the track to a mixer control bus soft synth or assignable effect chain and assign the mixer control to the LFE channel To assign audio to the LFE channel right click the surround panner on the track header or mixer control and choose LFE Only from the shortcut menu The track or mixer control is assigned to the LFE channel WORKING WITH 5 1 SURROUND 211 212 Chapter 13 To change a track or mixer control back to surround panning right click the LFE indicator and choose Surround Pan from the shortcut menu Note Before rendering your surround project check your surround authoring application s documentation to determine its required audio format with respect to the LFE channel For more information see Setting up surround projects on page 210 Adjusting volume Adjusting track volume for 5 1 surround projects behaves almost identically to stereo projects The controls in the track headers and Mixer window can function as trim controls that adjust the overall volume of the track bus or assignable effe
419. racks Inserting events at the play cursor You can also insert events at the cursor during playback You can use this feature to create rhythms on one shot tracks while listening to the track you re editing in the context of the rest of your project When you re done creating events you can use the Render to New Track command on the Edit menu to save the rhythm to a new track or you can copy and paste your new events across the timeline 1 Create a time selection in the portion of the project you want to edit 2 Select the Loop Playback button 3 Click the Play button a to start playback 4 Click a track header in the track list to set the focus track 5 Press Y to add an event at the play cursor during playback the edit cursor remains fixed and the play cursor follows playback If snapping is enabled events are created at the next snap point You can use snapping to quantize your events 6 Repeat step 5 as needed 7 You can press the up and down arrow keys to change the focus track 8 Click the Stop button a when your re finished creating events 9 Edit event positions as necessary Tip f you re using this feature to tap rhythms with one shot tracks try applying a groove to adjust the timing of your rhythm For more information see Working with grooves on page 120 Changing the length of events After an event is painted on the track view you may discover that it is too long or not long enough however
420. re The clipboard is the location where data cut or copied from ACID is stored You can then paste the data back into the software at a different location Occurs when the amplitude of a sound is above the maximum allowed recording level In digital systems clipping is seen as a clamping of the data to a maximum value such as 32 767 in 16 bit data Clipping causes sound to distort Coder decoder refers to any technology for compressing and decompressing data The term codec can refer to software hardware or a combination of both technologies A compression ratio controls the ratio of input to output levels above a specific threshold This ratio determines how much a signal has to rise above the threshold for every 1 dB of increase in the output For example with a ratio of 3 1 the input level must increase by three decibels to produce a one decibel output level increase Threshold 10 dB Compression Ratio 3 1 Input 7 dB Output 9 dB Because the input is 3 dB louder than the threshold and the compression ratio is 3 1 the resulting signal is 1 dB louder than the threshold The ratio of the size of the original noncompressed file to the compressed contents For example a 3 1 compression ratio means that the compressed file is one third the size of the original Each computer has a unique number similar to a license plate Sony creates an activation number based on that number Since the activation number is based on the C
421. re information see Setting up MIDI message input filters on page 179 USING AUTOMATION 131 132 Chapter 8 You can also use an external MIDI controller or the keyboard drum list between the track header and timeline to record MIDI into your ACID project For more information see Using MIDI merge recording on page 166 MIDI program change automation You can use keyframes to change the track voice throughout your project For more information see Adding a program change keyframe on page 184 Working with track envelopes Envelopes represent volume audio panning bus send levels effect send levels MIDI controllers and effect parameter automation settings in the timeline Envelope type Description Color Volume Controls track volume Blue Bus send volume Controls track level sent to bus Lilac Assignable effects send Controls track level sent to assignable effects control Green volume Pan Controls the position of a track in the stereo field pan Red MIDI controller Adjusts MIDI controller values Various Adjusting envelopes To adjust the overall level of an envelope simply drag the envelope line up or down A tooltip displays the amount of the adjustment as you drag You can adjust envelopes in real time You can also change the level of an envelope over time by adjusting individual envelope points that you place along the envelope line Tip Ifyou have multiple envelopes on a track hover over an envelope to display a t
422. ress to toggle the state of the Dim Output button in the Mixer window 252 APPENDIX B Project buttons The Project buttons perform various project level commands MACKIE a rn ts Ve Ve a eve G gt A J ol 3 N i ia a E A i a a a a o oo ISIS tae 3 Item Description 1 Save Press to save your project 2 Undo Redo Press to reverse edit operations Hold Shift while pressing the button to reverse an undo operation 3 OK Not used 4 Cancel Not used Timeline buttons The Timeline buttons perform various commands for the project timeline et as 3000000 2 2 amp e 4 E a 5 aee 6 7 Item 1 Marker 2 Region 3 Loop Select 4 Mark In Go to In 5 Mark Out Go to Out 6 Event Trim Center Cursor Description Press to place a marker at the cursor position Hold the Ctrl button while pressing the button to remove a marker Press to convert the current selection to a region Hold the Ctrl button while pressing the button to remove a region Press to toggle looped playback mode Hold the Shift button while pressing the Loop Select button to create a time selection from the loop region Press to set the beginning of the loop region at the cursor position Hold the Shift button while pressing the Mark In Go to In button to move the cursor to the beginning of the loop region Press to set the end of the loop region at the cursor position Hold the Shift button while pressing the Mark Out
423. rl or Shift while clicking the events to select them and then select the tracks e Ifa selected event has note events selected only the selected notes will be quantized Note Muted tracks will not be quantized 5 Click the Apply button Editing velocity 1 From the Edit menu choose MIDI Processes and Filters The MIDI Processes and Filters dialog is displayed 2 Select the Velocity tab MIDI Processes and Filters Quantize velocity Duration Change Start Velocity Change Release Velocity Change type E Invert Set to Add Scale by Limit Change over time 3 Select a check box to indicate whether you want to edit note on or note off velocities Item Description Change Start Velocity Select this check box to edit note on velocities Change Release Velocity Select this check box to edit note off velocities 4 Select a radio button to indicate how you want to change velocity Item Description Invert Select this radio button to invert selected note velocities When you invert a velocity it is subtracted from 127 negative values are forced to positive so a note with a velocity of 127 will be 0 after inversion a velocity of 10 will be 117 and so on Set to Select this radio button and drag the slider to change note velocities to a specific value 174 Chapter 11 Add Scale by Limit Change over time Select this radio button and drag the slider to add or
424. rmation see Adding tempo key time signature change markers on page 97 10 Repeat steps six through nine to synchronize the rest of your video 208 Chapter 12 Chapter 13 Working with 5 1 Surround You can create 5 1 channel mixes to wrap a listener in your remixes or prepare audio for cinema DVD Video DVD Audio or DTS 5 1 Music projects Note ACID plays and mixes uncompressed 5 1 channel audio Authoring software such as the Sony 5 1 Surround Plug In Pack is required to encode 5 1 channel audio for compressed delivery formats What is 5 1 surround 5 1 surround is a standard format consisting of three speakers across the front and two speakers in the rear The 1 is a sixth channel called low frequency effects LFE that enhances the bass levels in the mix 5 1 surround includes five main channels and a sixth channel for low frequency effects Center LFE t T Left Right Surround Surround The LFE channel is commonly used in motion pictures to enhance low audio frequencies for effects such as explosions or crashes Audio in this channel is commonly limited to a range from about 25 Hz to 120 Hz Unlike the five primary channels the LFE channel adds no directional information Depending on the speaker setup and audio levels the sound assigned to the LFE channel may be routed among the five main speakers or to an additional subwoofer WORKING WITH 5 1 SURROUND 209 210 Chapter 13 Setting up surround h
425. rpose slider 2 Drag the fader to adjust the level of the track sent to the assignable effect chain Tip Assignable effect chains are post volume by default To change to pre volume click the multipurpose slider label in the track list choose the appropriate assignable effect chain from the menu and choose Pre Volume from the submenu If you set the Dry Out faders in your effect chain to inf you can adjust the wet dry balance using the volume and assignable effect settings on the multipurpose slider The volume fader adjusts the dry signal and the assignable effect fader controls the effect signals Routing assignable effect controls to busses By default assignable effect controls are routed to the Master bus for output The bus then mixes the assignable effect plug ins with all tracks routed to the same bus and outputs the mixed signal to the appropriate output device For more information see Routing busses to system hardware on page 141 To route an assignable effect control to a different bus click the Playback Device Selector button on the assignable effect control and choose the desired bus from the drop down list The drop down list displays all current busses in the project For more information see Adding busses to the project on page 141 USING THE MIXER 143 144 Chapter 9 Deleting assignable effect controls In the Mixer window right click the assignable effect control you want to delete and choose Delete from t
426. rties on page 120 Note When you edit a clip in an external editor changes to the sound file are reflected immediately after you save the file Changes to a media file s ACID properties are not updated in your ACID project until you click Reload on the Clip Properties window Managing a track s clips Each track in your ACID project can contain multiple distinct media files called clips Use the Clip Pool tab in the Track Properties window to add remove and preview clips For more information see Using clips with tracks on page 107 Adjusting general clip properties The General tab displays information about the file associated with a clip and allows you to change the ACID type apply pitch shifting to all events on the track that use the same clip and adjust time stretching for Beatmapped clips Changing clip type Choose a setting from the ACID type drop down list to change the way the clip is handled Track Type Description Loop When you select Loop the clip is transposed to the key of the project and stretches to fit the project tempo Loops can be drawn across the track and will repeat end to end One Shot When you select One Shot the clip is streamed from the hard disk rather than storing it in RAM if it is longer than thirty seconds One shot files do not change tempo with the rest of the loops and are not transposed to the project key The Stretch tab is not available when One Shot is selected Beatmapped When you add a fi
427. s cece ccc eect eee nena eeees 196 Resetting MIDI DONS nsaatcneuen san entr aaernaedeneedane RENTENE ENAT EEE IEN ENATS TAN 197 Rendering projects with MIDI tracks ccc ccc ccc cc cece eee eee eee eeeees 197 Playing MIDI from external devices 6 ccc cece cece eee e eee e eee eeeeeneeees 197 Adding external devices as MIDI inputs 0 cece eee cece e eee e eee eeeeeaes 197 Assigning MIDI inputs to soft synth controls ccc ccc cece eee e eee eeeennnes 197 Creating or editing program MAPS ccc cece cece eect eee e eee e eee e ee eeeeeeanes 198 Creating program Maps 2 c isiutaasisssaeekateawasan aconenadne lena enswerIee ede s eaetenws 198 Editing programi Maps is64006h cen wiwe dh cand odes siwaetouneetaauwd eo taniNasedewtawedews en 199 Assigning a patch map to a MIDI device ccc ccc ccc ccc eee eee eee nese eeeeeeeees 199 Creating or editing drum maps cece cece eect eee e eee e eee e eee e ee eeeeanes 200 Editinga dr MAD is cc045050ciancaeroendeeveessadenisosbectedarersaceensoessateadawes 200 Choosing a drum map for a track cece cc ccc cece eect eee ene e eee eeeeeeeneees 201 Synchronizing using MIDI timecode cece cece cece eee eee teen eee eeeees 201 Generating MIDI timecode ccc cee e eee e eee e seen esse eeeeeeeeeeenees 201 Triggering from MIDI timecode cece ccc ec ccc eee teen eee eee e eee eeennees 202 Generating MIDICIOC
428. s Description Keys Zoom in on timeline Rotate mouse wheel forward or back Horizontal scroll Shift wheel Move the cursor in grid increments Ctrl Shift wheel Adjust slider fader Wheel up or down while hovering over slider fader handle Audio signal flow Audio Media Bit Depth Conversion Time Stretch Pitch Shift Channel Conversion Event Gain ASR Processing Resampling Normalize Event Invert Track Invert Event ASR Track FX Track Volume Pan amp Mute Pre Post Post Pre Bus Send Level Assignable FX Send Level Bus Master From FX FX Volume FX Chain FX Chain Master To Bus Hardware Bus Output Master Bus FX Chain Gain Hardware Output INTRODUCING ACID SOFTWARE 31 32 Chapter 1 Notes on audio signal flow This diagram describes non MIDI audio events For MIDI events see MIDI signal flow on page 33 In 5 1 surround projects tracks routed to the Surround Master bus send surround panning six channel information Tracks routed to busses e g Bus A send stereo panning two channel information Assignable effect chain panning is available only in 5 1 surround projects In 5 1 surround projects assignable effect chains routed to the Surround Master bus send surround panning six channel information Assignable effect chains routed to busses e g Bus A send stereo panning two channel information Bus panning is available only in 5 1
429. s a amp in automation mode 2 Click the label on the multipurpose slider and choose an assignable effects chain from the menu USING AUTOMATION 129 130 Chapter 8 i Grassy Knoll Elek amp vo ood Touch f Fan Center el d Hyperfuzz 03 Bus A 0 6 dB i 3 Drag the FX fader to control the level of the track sent to each of the assignable FX chains that you have created The fader behaves differently depending on the track automation recording mode e When the track has an assignable effects envelope and the track automation mode is set to Off the fader adjusts the send level of the entire track In this mode the automation control acts as a second trim control e When the track has an assignable effects envelope and the track automation mode is set to Read the fader will follow the envelope during playback but cannot be adjusted e When the track has an assignable effects envelope and the track automation mode is set to Touch or Latch the fader edits the envelope setting at the cursor position If the track does not have an envelope one will be created when you adjust the fader If multiple tracks are selected all selected tracks are adjusted If you adjust the fader during playback the behavior varies depending on the selected automation recording mode For more information see Automating 5 1 surround projects on page 136 Adding or removing track effect automation If a plug in supports
430. s and contrary to the terms and conditions of the End User License Agreement Such activity may be punishable by law and may also subject you to the breach remedies set forth in the End User License Agreement Legal notices Vegas Vegas DVD DVD Architect Vegas Movie Studio Vegas Movie Studio Platinum Vegas Movie Studio DVD DVD Architect Studio ACID Music Studio ACIDized Sony Sound Series Groove Mapping Groove Cloning Media Manager CD Architect Sound Forge and Audio Studio are trademarks or registered trademarks of Madison Media Software Inc or its affiliates in the United States and other countries All other trademarks or registered trademarks are the property of their respective owners in the United States and other countries Thomson Fraunhofer MP3 MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue generating broadcast systems terrestrial satellite cable and or other distribution channels streaming applications via internet intranets and or other networks other content distribution systems pay audio or audio on demand applications and the like or on physical media compact discs digital versatile discs semiconductor chips hard drives memory cards and the like An independent license for such use is required For details please visit http mp3licensing com Mi
431. s will be automatically bypassed to prevent synchronization problems with the ReWire mixer application The effects chain icon will be displayed as a Apply the plug ins within the ReWire mixer application Adding plug in chains 1 2 5 Click the FX button 84 on the mixer control The Plug In Chooser dialog appears Select the plug ins that you want to add The selected plug ins appear in the chain area There are three ways to add a plug in to the chain e Double click the plug in Drag the plug in to the chain area Select the plug in and click Add Tip fyou have saved any plug in chain packages double click the Packaged Chains folder to view those packages For more information see Saving plug in chains as packages on page 151 Click OK to close the Plug In Chooser dialog The Audio Plug In window opens and displays the plug in chain Click a specific plug in and adjust the effect s parameters manually or choose one of the presets from the Preset drop down list For more information about effect parameters click the Plug In Help button in the Audio Plug In window Tip You can save an effect s parameters as a preset to be used in other projects To save a preset enter a name in the Preset box and click the Save Preset button Click the Close button to close the Audio Plug In window Adding plug ins to existing plug in chains 1 2 3 4 Click the FX button 84 on the mixer con
432. ses through the EQ it carries the EQ s settings as it passes through the compression plug in then the signal carries both those plug in settings to the next plug in Because of this cumulative effect you may need to arrange plug ins in a certain order so that one plug in s processing does not adversely affect the next plug in on the chain There is no right or wrong way to order plug ins although some plug ins work better when they follow another However the plug in order in the chain is strictly based on your preferences and desired output 1 Click the Track FX button 84 The Audio Plug In window appears 2 There are three ways to arrange plug ins in your chain e Drag the plug in to a new location in the chain e Right click the plug in and choose Move Left or Move Right from the shortcut menu e Click the plug in and then click the Shift Plug In Left E and Shift Plug In Right EA buttons 3 Click the Close button X to close the Audio Plug In window Bypassing plug ins in a chain You can bypass a plug in without removing it from the chain by clearing the check box for the plug in Alternately right click the plug in and choose Bypass from the shortcut menu c Graphic EG Tip To bypass or re enable all plug ins in a chain right click the Track FX button H and choose Bypass All or Enable All Bypassing effect automation For plug in chains that include effect automation using envelopes you can bypass
433. set between the time you initiate recording and when your sound card starts recording Click this button to open the Advanced Audio Configuration dialog Click to restore the Audio tab to the default settings APPENDIX A 231 232 APPENDIX A Setting Advanced audio preferences from the Audio Device tab Item Audio devices Interpolate position Position bias Do not pre roll buffers before starting playback Audio buffers Buffer size samples Priority Using the MIDI tab Item Make these devices available for MIDI track playback Make these devices available for MIDI input Description This list displays all of the audio devices that are installed in your computer Selecting a device allows you to set the options for that device When you select this check box the software attempts to compensate for inaccurate devices by interpolating the playback or recording position If you notice that your playback cursor is offset from what you are hearing select this option for the playback device If the position of playback or record does not match what you hear after you enable Interpolate position you can attempt to compensate using the Position bias slider Moving this slider offsets the position forward or backward to compensate for the inaccuracies of the device When you select this check box buffers are not created prior to starting playback Some devices do not behave properly if you clear this check box
434. shots Clips 41 Selecting in the Chopper 106 Online help 15 Opening Media files 37 Projects 36 Other preferences tab 238 Overview of ACID 16 Packages Saving 112 151 Paint Clip Selector 20 Painting events 41 42 Palettes 79 Assigning buttons 79 Clearing buttons 80 Creating 79 Panic button 197 Panning Automation 128 Pan types 113 216 Surround 213 Tracks 20 48 113 136 Panning audio Envelope 132 Pasting Events 61 In ripple mode 69 Tracks 47 Patch maps 198 Piano roll editor 170 187 Adding note events 188 Continuous controller information 189 Deleting note events 191 Editing note events 188 Previewing MIDI 188 Quantizing note events 190 Selecting note events 190 Snap to scale 190 Undoing and redoing 191 Pitch shifting Clips 98 Events 71 98 Projects 96 Playing projects 50 Bypassing audio effects during playback 51 Playing from the cursor position 50 Playing the entire project 50 Using playback options 50 Using the transport bar 50 Plug In Manager window 24 Plug Ins See Effects Post roll 159 Preferences Audio 230 Audio device 230 Display 238 Editing 234 Envelope colors 238 External Control amp Automation tab 239 General 228 MIDI 232 Other 238 Sync 236 Track colors 238 VST effects 234 VST Instruments 234 Pre roll 159 Preset Manager 151 Presets Managing 151 Saving 149 Previewing clips 109 Previewing medi
435. sition of the track in the stereo field The fader and the slider behave differently depending on the track automation recording mode e When the track automation mode is set to Off the fader adjusts the volume of the entire track and the slider pans the entire track In this mode the automation control acts as a second trim control e When the track has a volume envelope and the track automation mode is set to Read the fader slider will follow the envelope during playback but cannot be adjusted e When the track automation mode is set to Touch or Latch the fader slider edits the envelope setting at the cursor position If the track does not have a volume pan envelope an envelope will be added when you adjust the fader slider If multiple tracks are selected all selected tracks are adjusted If you adjust the fader slider during playback the behavior varies depending on the selected automation recording mode For more information see Automating 5 1 surround projects on page 136 Bus automation You can use bus automation envelopes to vary the level of a track sent to a bus Adding bus envelopes A bus envelope controls the level of a track sent to a particular bus Before you can add a bus envelope you must add busses to the project For more information see Adding busses to the project on page 141 1 Select the track to which you want to add the bus envelope You may select multiple tracks 2 Add the envelope to the selected
436. sod 141 ISIC DUS E erreen EEE whe ante obey 6 ceeds heeds aetewi na owe EE 141 Adding busses to the project ccc ccc ccc cence eee e eee e nee e eee e eee eeeeeneennees 141 Routing tracks to busses 4 ocicvsesdaseceteunddaseesdauedd eases teeedademesdentceseeesaeuaseas 141 Routing busses to system hardware cece ccc ccc eee e eee e eee e eee eee eeennaes 141 Deleting PUSSES ai kare orca eomennwsie roena waned ieee areata on ea eo ere bed euleaa uae 142 Using assignable effects ours sik tonede ried s ania asda Aaa Mona tienen aeons 142 Adding assignable effect controls ccc cece eee eee eee e eee e ee eeeneeneees 142 Working with assignable effects Chains ccc ccc cece cece eee e eee eeneeennees 143 Routing tracks to assignable effect controls ccc eee ceeeeeee ee ee eee eeeneennaes 143 Routing assignable effect controls to busses cece cece cc cece nett eee e een eneees 143 Deleting assignable effect controls 6 0 ccc ccc eect e eee e eee eee eennees 144 Using sont SMU COMMO S lt 6cuucntonkaaeeacthe ae wieeGekaaeeweiereaaheneaenab domenuets 144 Adding soft synth controls to projects 1 0 0 cece cece cece ence e eee e eee ee eeeeeeeeennes 144 Modifying soft synth control properties ccc ccc cece een teen nett eeeeenneeees 144 Deleng son SY MUN COMILOIS v5 n4 wa scewwsta anaes ah cie ne vue hea cana sannars caren 147 Routing MIDI tracks to soft synth Controls ccc ccc ccc cee eet e n
437. sound the way you intended it even when your audience s hardware has fewer channels than the original mix The button represents the current playback mode 5 1 surround output ea bee Stereo output Ei Mono output Attenuates the volume of all busses that are routed to hardware outputs by 20 dB Click again to restore original volume Adds an assignable effect chain to your project The Plug In Chooser dialog appears so that you can create a plug in chain For more information see Using assignable effects on page 142 Adds another bus to your project The Audio tab in the Project Properties dialog updates to reflect the new number of busses For more information see Using busses on page 141 Adds a soft synth control to your project You can assign MIDI tracks or external MIDI input devices to the soft synth control and assign the soft synth control to a DLS set or VSTi plug in For more information see Using soft synth controls on page 144 Renaming mixer controls Double clicking a mixer control name allows you to rename the control Press Enter to save the change A Enter anew name E S jase a Eeg Center InF InF Led 124 2 18 24 gt 30 Lag e Bea ee 0 0 Using the mixer s faders Adjusting the Preview fader Drag the fader up or down to adjust the preview volume Hiding the Preview fader Once you have added all desired media files to a project you may want to hide the Preview fader t
438. st be on a streaming media server Check with your internet service provider for details and availability of this service Placing command markers Command markers appear on the command ruler which is above the marker bar F URL command marker URL http w sony com mediasottware Command ruler Marker bar 1 Position the cursor where you want to place the command marker 2 From the Insert menu choose Command Complete the Command Properties dialog e From the Template drop down list choose a custom template For more information see Saving command properties as a custom template on page 91 e From the Command drop down list choose the type of command For more information see Defining streaming media commands on page 92 e Enter parameters in the Parameter box to define the behavior of the command e Enter your own notes or comments in the Comment box e Specify the timing of the command in the Position box Command markers are automatically set to the current cursor position unless you change this value 4 Click OK The new command marker appears on the command bar After you create a command marker you can move the marker by dragging it to a new location Editing command marker properties Double click any command marker to open the Command Properties dialog and edit its contents You can also right click a command marker and choose Edit from the shortcut menu Saving command properties as a custom template If y
439. start and end points of a loop region time selection You may place a region in one of the following ways From the Insert menu choose Region e Right click the marker bar choose Markers Regions from the shortcut menu and choose Insert Region from the submenu e Press R WORKING IN THE TRACK VIEW 93 94 Chapter 5 Region start Region end Loop region After you place a region you may change its position by dragging the region tag to the desired position Tip You can move a region without changing its size by holding Alt while dragging either region tag Naming regions You can name the placed regions in your project You may want to name regions based on parts of the project or to define the amount of time that the regions encompass For example you may want to identify introductions solos or special time related features in your project as reference points 1 Right click the region s start tag and choose Rename from the shortcut menu A box appears next to the tag 2 Type a region name and press Enter to save the name Navigating to regions While you are working on your project you may have scrolled to a portion of the project where the cursor is not visible You may click in the track view to move and view the cursor or you may use region tags to bring the cursor into view To move the cursor to the selected region tag right click the region tag and choose Go To from the shortcut menu Tip You may also nav
440. startup When you select this check box information is periodically displayed from Sony at startup Clear the check box to bypass the Net Notify dialog Select this check box if you want waveforms to be drawn in events Clearing the check box can improve performance on some systems Select this check box if you want Undos to be created when you change a plug in parameter When you select this check box a message box appears asking if you want to delete a media file that is currently in use by the project When you select this check box you can edit files in external editors while the files are contained in events in ACID Select this check box if you want to close ACID audio and MIDI ports when you switch to another application Clear the check box if you want to leave ports open For example if you have a MIDI keyboard routed to an ACID soft synth clearing the check box allows you to continue to hear the soft synth while you work with a sequencer When you select this check box you can use a multimedia keyboard to control playback of a project The WAV format is limited by a maximum file size of 2GB When you select this check box you can render larger files as Sony Wave 4 files When you select this check box a box appears so you can name markers and regions as you place them When you select this check box a backup of project files is made when you open them Backup files are stored in the same folder as your project
441. sults in double time playback This is an easy way to add speed metal drum tracks to your project This technique is also useful for adding a kick drum on every beat to producing a heavy dance foundation Conversely configuring a file with twice its actual number of beats results in half time playback 1 Right click the desired track in the track list and choose Clip Properties from the shortcut menu The Clip Properties window appears Click the Stretch tab 3 Change the value in the Number of beats box Constructing the wall of sound As mentioned previously it is sometimes preferable to color and thicken mixes without resorting to effects and other digital processing Working without the benefit of multitrack recording music producer Phil Spector colored his songs by having several instruments play slightly different parts For example he might have an acoustic bass an electric bass and a piano play slight variations on the same basic riffs These variations along with the different timbre of the actual instruments produced a dense sonic mass that became known as The Wall of Sound e To add this aural density to your projects experiment with using two three or even four tracks of similar instrumentation e Alter the pitch of specific tracks to help them cut through the mix For more information see Changing a clip s key on page 98 e Further differentiate specific tracks using pan and volume envelopes to color the project and s
442. surround projects In 5 1 surround projects busses routed to the Surround Master bus send surround panning six channel information Busses routed to hardware send stereo panning two channel information MIDI signal flow Track Volume Device or Soft Synth Assignment Soft Synth DLS Voice Set Soft Synth Bus Audio Bus Master Bus Master Bus FX Chain Gain Mute Hardware Output External MIDI Device Bus FX Chain Hardware Output From FX INTRODUCING ACID SOFTWARE 33 Notes on MIDI signal flow e Soft synth panning is available only in 5 1 surround projects In 5 1 surround projects soft synth controls routed to the Surround Master bus send surround panning six channel information Soft synth controls routed to busses e g Bus A send stereo panning two channel information e Bus panning is available only in 5 1 surround projects In 5 1 surround projects busses routed to the Surround Master bus send surround panning six channel information Busses routed to hardware send stereo panning two channel information 34 Chapter 1 Chapter 2 Getting Started Now that you have an understanding of the interface and controls found in ACID software you are ready to begin learning the techniques needed to pick paint and play in ACID projects In this chapter you will learn the skills that will allow you to create music from locating media files to writing the
443. t or use the browse window to locate the folder where you want to save your backup 3 Inthe File name box type the name you want to use to identify the library Click the Save button To restore the backup at a later time open the backup file Opening a Reference Library A reference library contains information about media from an outside source or vendor You can also use a reference library to search media files that you aren t part of your collection For example if you re unable to find the perfect loop for an ACID project in your own collection you could use the Sony Sound Series Loops amp Samples reference library to search the entire Sony Sound Series Loops amp Samples catalog and purchase a new loop library You can use the Media Reference Library drop down list in the Media Manager Options dialog to determine which library is opened when you click the Switch to Media Reference Library button Hi 1 Click the Switch to Media Reference Library button Hi The reference library specified in the Media Manager Options dialog is opened Media in a reference library is displayed in gray text to indicate that the files are not available on your computer Find the media you re looking for with a standard or advanced search Tag media from the reference library as needed For more information on tagging see Tagging media files on page 77 When you select a file in a reference library the Product Information pane displays inf
444. t parameters for effects that support automation for a specific track You can distinguish the various envelopes by their color For more information see Using Automation on page 127 Choosing stereo pan types When you pan a track using the pan slider or a pan envelope you can choose among several pan types to determine how the track is panned Note When applying stereo pan types a monaural track is interpreted as a stereo track with the same data in both channels 1 Click the pan slider label and choose a pan type from the submenu e The Add Channels pan type is most useful for panning stereo source material This pan type makes the stereo image appear to move as a unit between the speakers As the fader is moved from the center to a side more and more of the signal from the opposite side is folded into the side you are panning towards until at the extreme both channels are fed at full intensity into a single channel This pan type uses a linear panning curve e The Balance pan type is most useful for adjusting the relative signal levels of the right and left channels in stereo source material In this pan type moving from the center to a side the opposite side starts at a base dB level either 0 dB 3 dB or 6 dB and decays to no signal level The signal in the side you are panning towards starts at the base dB level either 0 dB 3 dB or 6 dB and increases to 0 dB When the stereo source is panned fully to one side that sid
445. t DLS sets VST instruments or ReWire device applications e Ifa MIDI device does not appear in the menu choose External MIDI Device Preferences to open the MIDI tab of the Preferences dialog and verify that the check box for the device is selected If a device is selected for generating MIDI timecode on the Sync Preferences tab it will be unavailable as a playback device lal Stephanie So oe Autor All peti 4 0 0 Wal 100 Output CFF Pan Center External MIDI Device Preferences Pitch Bend 4ftertouch e Soft Synth 1 B4 spressi Modulation Hm Insert Soft Synth Parkamento Ti Se Ss MIDI Channel 2 Choose a device from the list to send the current track to that device To route to a specific port in a ReWire 2 0 device choose your ReWire device application from the list and then choose a port from the submenu Note n order to render projects that contain MIDI tracks MIDI tracks must be routed to DLS VSTi or ReWire 2 0 soft synths Tracks that are routed to external MIDI devices will not be included in the rendered file For more information see Using the Sync tab on page 236 196 Chapter 11 3 To choose which MIDI channel will be used to send MIDI data choose MIDI Channel and then choose a channel from the submenu Tip f you want to select multiple input channels hold Ctrl and select additional channels from the MIDI Channel submenu Resetting MIDI ports When a MIDI port is stuck playing a sustaining so
446. t General MIDI 2 Standa L Room Set 6M2 Device Default General MIDI 2 Room L Power Set 6M2 Device Default General MIDI 2 Power J Electronic Set GM2 Device Default General MIDI 2 Electro CJ Analog Set 6M2 Device Default General MIDI 2 Analog J Jazz Set GM2 Device Default General MIDI 2 Jazz Se L Brush Set GM2 Device Default General MIDI 2 Brush L orchestra Set GM2 Device Default General MIDI 2 Orches L SFY Set Me Device Default General MIDI 2 SFX Se lt iiil gt Note You can also select drum maps by doing any of the following e Double click the MIDI track icon to open Track Properties dialog On the Output Setting tab choose Drum Map from the drop down menu e Click the Program button choose Drum Maps and then choose Select Drum Map Configuring MIDI input filters You can use the Input Filters tab set up MIDI message velocity or quantize filters Setting up MIDI message input filters Use the Input Filters tab to choose which notes or other MIDI messages you want to record or exclude from MIDI recordings Track Properties Stephanie m D Sutput Settings Input Filters Clip Pool Message Filter wt Enable Record all Record selected items Record unselected items MIDI Message Type Channel Messages w Mote C Polyphonic Key Afbertouch C Channel 4ftertouch C Pitch Bend C Program Change Select the track where you want to apply the filter From th
447. t Synth Properties window 2 Select the Arm for Record buttons on the tracks where you want to record Arming a track enables it for recording If you don t arm a track for recording a new MIDI track will be created when you click the MIDI Step Record button 3 Choose a MIDI input device and channel for each armed track For more information see Setting up a MIDI controller for recording into a track on page 164 4 Setup any desired MIDI message velocity or quantize filters for your armed tracks For more information see Processing and filtering MIDI events on page 173 Click and drag in the marker bar or a blank area of the timeline to create a loop region Select the Loop Playback button Select the MIDI Merge Record button a oe Position the cursor at the start of the loop region If you want to record with pre roll you can position the cursor before the loop region 9 Click the Record fo button on the transport bar to start recording MIDI messages from your controller are recorded as you play them e Notes are added to an event in the timeline e MIDI controller adjustments such as pitch wheel and modulation wheel movements are recorded as track envelopes For more information see MIDI controller automation on page 131 MIDI controllers are recorded in touch timeout mode envelope points are created or edited when you change a control setting When you stop adjusting the control existing envelope points on
448. t drag up and down with the Draw tool to draw note events across several pitches at once 1 Click the Draw Tool button l The Draw tool is selected 2 Drag in the row for the pitch you wish to create A new note event appears as you drag Painting note events Unlike the Draw tool the Paint tool allows you to create note events across multiple pitches with a single drag of the mouse The Paint tool also allows you to select the note length you want to paint 1 Click the arrow adjacent to the Paint Tool button and choose a note length to paint from the menu 2 Click the Paint Tool button F The Paint tool is selected 3 Drag to create new note events The new events appear as you drag Editing note events You can change the length or pitch of a note event using the Draw tool You can also cut copy and paste events in the same way you do in the main ACID window Changing pitch With the Draw tool l selected drag a note event to a new row Changing length With the Draw tool 7 selected drag the edge of a note event to a new location Tip As you drag the edge of a note event the event edge snaps to the divisions on the beat ruler To snap to smaller divisions click the Zoom In Time button at the bottom of the window to zoom in more tightly Or to turn off snapping altogether click the Enable Snapping button Al to toggle it off Specifying a velocity value for notes To enter a specific veloci
449. t markers P stretch markers h or b and beat anchors y are created for every transient As you decrease the setting markers are created for only strong transients Increasing this setting can be advantageous when working with audio that has complex rhythms Lower settings are more suitable for synthesizer pads and other basic material Choose a setting from the drop down list to specify the resolution for beat anchors y Choose a setting from the drop down list to specify how many stretch markers will be displayed along the bottom of the waveform display Audio that contains rapid notes such as drum rolls benefits from setting the divisions at a smaller fraction of a beat Slower paced material however may actually suffer from high resolution Click to automatically detect the beats in the current file Use this button to apply the ACID beat detection algorithm to existing media WORKING WITH TRACKS 117 118 CHAPTER 7 Stretch markers for loop clips Stretch markers A correspond to subdivisions of beats in the audio file These markers tell ACID where to divide the audio when performing time stretching to match tempo Accurately detecting these beats is the key to making the time compression process sound good Each beat marker f on the beat ruler corresponds to a combination beat stretch marker A on the timeline If you want to convert a combination beat stretch marker to a stretch only marker double click
450. tasks related to your project or manage your media These windows can float on the workspace or be docked in the window docking area All these windows may be viewed or hidden via the View menu or their respective shortcut keys Window Shortcut keys Description Explorer Alt 1 Allows you to view and access your media files without leaving the work area You may also preview media files and place them in your project from this window Chopper Alt 2 Allows you to select portions of a media file that can be placed into tracks as events Mixer Alt 3 Allows you to work with busses assignable effect chains and soft synth controls Video Preview Alt 4 Displays a project s video output at the current cursor position in the timeline Media Manager Alt 5 Displays the Media Manager which you can use to search for manage and tag your media files Track Properties Alt 6 Allows you to view and edit track attributes For MIDI tracks allows you to edit MIDI using the piano roll editor list editor or other OPT plug ins Surround Alt 7 Allows you to control panning in a 5 1 surround project Panner Soft Synth Alt 8 Allows you to change the attributes of soft synth controls in the Mixer Properties window Audio Plug In Alt 5 Allows you to view and edit settings for assignable bus soft synth and track effect chains Plug In Ctrl Alt 1 Allows you to view and choose effects plug ins to be added to a track Manager bus or assignable effects ch
451. tch markers are used to establish a baseline for applying other grooves with the Groove Pool window and Groove tool User defined markers have no effect on groove quantization You can add move and delete beat anchors and markers on the Stretch tab Moving anchors You can drag beat anchors and stretch markers to map the sample data in the waveform to a specific beat e Moving a beat marker P changes the audio that will be played at a beat anchor location e Moving a beat anchor changes the beat on which the audio represented by a stretch marker will be played Beat anchors snap to the current grid spacing Hold Shift while dragging to bypass snapping press Shift after you click Adding anchors Double click the marker bar above or above the beat ruler to create a new anchor and marker Deleting anchors You can remove a marker by right clicking and choosing Delete from the shortcut menu or by double clicking it Reset beat anchors Right click the beat marker bar and choose Reset All from the shortcut menu to reset the markers to their last saved positions Stretching properties for Beatmapped tracks The following table describes the settings on the Stretch tab for Beatmapped tracks Item Description Root note Choose a note from the drop down list to set the base note for tracks that you want to conform to the project key If you do not want a track transposed to the project key choose Don t transpose Original te
452. the Mark Loop Start button m Select the last event you want to play Click the Mark Loop End button ni Click the Play button to start playback Select the event where you want to begin playback and click the transport bar s Play button E or press Space The piano roll editor begins playback and loops the marked selection 7 To stop playback click the transport bar s Stop button m or press Space Filtering the list A MIDI file can contain a dizzying number of individual events You can speed the task of locating events in the list editor by applying a filter You can filter what the list editor displays either by track or by event type Filtering the list by event type 1 Click the Event Filter button E The MIDI Event Filter dialog appears Mf MIDI Event Filter 9x MIDI events bo hide J Control Change L Patch Change C Poly Pressure C after Touch J Pitch Bend C Packed NRPN J Packed RPM CJ Sysex C Meta channels cocel 2 Select the check box for an event type to hide that type or clear the check box to display that event type 3 Click OK The list is filtered according to the criteria you selected Editing events Once you have located a particular event you can edit the parameters of the event as needed 1 Click in the event row you want to edit 2 Click the Edit Event button SJ The Edit MIDI Event dialog appears Tip You can also double click an event s Message parameter
453. the marker or right click the marker and choose Convert to Stretch Marker from the shortcut menu Tip Use the Zoom In Time Up and Zoom Out Time Down buttons to change the magnification of the waveform As a general rule markers that are excessively close to each other may cause clicks in the audio However markers should not be more than one second apart or pitch and echo artifacts may result You can add move and delete stretch markers on the Stretch tab If snapping is enabled markers will snap to the current grid spacing Moving markers You can drag any marker to a new location If you move a combination stretch beat marker its associated beat marker P will also be moved Adding markers Double click the marker bar at the bottom of the waveform display to create a new marker It is advantageous to add new markers if the software does not detect any quick subdivisions in beats The biggest cause of audio artifacts due to time compression is a lack of beat detection Make sure that you add markers anywhere the application fails to put one on a pronounced beat Deleting markers You can remove a user defined marker by right clicking and choosing Delete from the shortcut menu or by double clicking a disabled marker Reset stretching markers Click the Reload button Fead to reset the markers to their last saved positions Beat anchors and markers for loop clips Beat anchors correspond to musi
454. the shortcut menu to clear the check mark 7 Ifyou want to assign the program to a group right click the Group box and choose a group from the shortcut menu If you want to create a new group choose Add New Group and type a name in the box 8 Double click the Prog MSB and LSB values to edit them and type the values that correspond to the appropriate program Please refer to your device or its documentation to determine the correct values for each program Notes e Within ACID MIDI values range from 0 127 If your device uses 1 128 subtract 1 when editing the program e Devices that use Sysex messages to change programs are limited to 128 programs 9 Click OK to close the dialog and save your changes Assigning a patch map to a MIDI device 1 From the Options menu choose Preferences 2 Click the MIDI tab 3 Inthe Make these devices available for MIDI track playback section of the dialog verify the check box is selected for your MIDI device 4 Right click the Device value for your MIDI device and choose Load Device Template from the shortcut menu WORKING WITH MIDI 199 200 Chapter 11 5 Browse to the patch map you want to use and click Open The selected patch map will be used for any track that is routed to the MIDI device Creating or editing drum maps From the Tools menu choose Drum Map Editor to display the Drum Map Editor dialog You can use the Drum Map Editor dialog to create or edit drum maps When a dr
455. the tracks as a group Resizing tracks You can change the height of a track thereby affecting how many tracks display in the track view This is especially useful when building a project with a large number of tracks In addition you can decrease the track s height until only the multipurpose slider Track FX button Mute button and Solo button are visible 1 Drag the bottom edge of a track up or down in the track list The pointer displays as a vertical stretch icon 2 Release the mouse button to establish the track s new height Tip You can set the default height for all new tracks by right clicking the newly resized track in the track list and choosing Set Default Track Properties from the shortcut menu For more information see Setting default track properties on page 22 7 Changing track colors As mentioned previously tracks are automatically created to accommodate new media files These tracks are assigned a default color However you can change track colors to organize the tracks in your project To change the color right click the track in the track list choose Color from the shortcut menu and choose the desired color from the submenu Renaming tracks To rename a track right click the track name and choose Rename from the shortcut menu or double click the track name Renaming a track applies to the project only and does not change the file associated with the track Duplicating tracks To duplicate a track right c
456. time 99 Installation 15 Joining events 66 K Key changes Clips 98 Event 71 98 Marker 97 Project 96 Keyboard shortcuts Chopper window 102 General 24 Keyframes 217 219 LFE channel 209 211 List editor 191 Creating MIDI events 195 Deleting MIDI events 196 Editing MIDI events 193 Filtering MIDI events 192 MIDI event parameters 193 MIDI notes and frequencies 194 Previewing MIDI events 191 Quantizing note events 195 Undoing and redoing 196 Locking events To track envelopes 135 Looped playback 50 Loops Clips 40 Creating in the Chopper 105 Exporting from projects 126 Stretching properties 116 117 M Mackie Control Universal 204 241 Add new buttons 250 Arrow buttons 255 Audio video buttons 252 Channel section 246 Control buttons 247 Display buttons 249 Fader banks 249 Footswitches 247 Jog dial 256 Markers 250 Modifiers 252 Project buttons 253 Timeline 253 Transport buttons 254 View buttons 251 Window buttons 251 Main window 17 Markers 89 93 Adding 118 Beat anchors and markers for loop clips 118 Command markers 91 Deleting 118 In the Chopper 102 Marker bar 21 Moving 118 Reset stretching markers 118 Stretch markers for loop clips 118 Tempo key time signature markers 97 Time markers 90 Media files Adding from Media Manager 84 Adding to projects 37 Downloading from the Web 40 Exporting loops from projects 126 Extracting from CD
457. time that timecode can be lost before the free wheel playback time starts A longer time is more tolerant of breaks in the incoming timecode Use the up and down arrows or enter a value in the box to specify the amount of time that playback continues after the free wheel slack time has been exceeded Use the up and down arrows or enter a value in the box to specify the amount of time it takes for the software to synchronize itself to incoming timecode On slower computers this time should be set to approximately two seconds On faster computers it may be set lower Setting this value too low can sometimes result in audible pitch shifting at the start of playback If ACID is consistently behind or ahead of your MTC generator enter a value in the box to adjust a synchronization offset with quarter frame accuracy If the software is behind set this value to a negative number A setting of 4 is a common offset If the software is ahead set this value to a positive number A setting of 4 is a common offset although it is rare that the application will sync ahead Select a radio button to determine when full frame timecode messages are sent while Generate MIDI Timecode is active Full frame messages are used by some external synchronizable audio devices to seek to a proper location prior to actually starting synchronization Tape based recorders especially benefit from seeking to full frame messages because of the time it takes to move t
458. timeline small indentations appear along the top and bottom edges of the event indicating the start and end points of each individual loop Tip Events can be also be drawn from right end to left beginning 4 Release the mouse button to end the event 5 Click the Play from Start button on the transport bar The event plays back Painting events with the Paint tool Unlike the Draw tool the Paint tool allows you to quickly paint multiple events across several tracks This can be useful when you need to quickly add several seemingly random events to a project The Paint tool is also best used for painting multiple one shot events that will be evenly spaced on the grid lines When painting MIDI or one shot clips you can click the down arrow next to the Paint tool to set the length of events that will be created when you drag with the Paint tool 1 Click the Paint Tool button F or choose Editing Tool from the Edit menu and choose Paint from the submenu The mouse pointer displays as a brush icon 2 Click and hold the mouse button while dragging the Paint tool randomly across the several tracks Notice that events are painted in every grid space the Paint tool contacts 3 Release the mouse button to stop adding events Click the Play from Start button w on the transport bar All new events play back Tip With the Paint tool selected you can use Ctrl click to paint an entire event for one shot Beatmapped and MIDI t
459. ting the software except as expressly described in the End User License Agreement is strictly prohibited No part of this manual may be reproduced or transmitted in any form or for any purpose without the express written consent of Madison Media Software Inc Copyright 2006 Madison Media Software Inc Program Copyright 2006 Madison Media Software Inc All rights reserved Table of Introducing ACID Software 0 cece cece cece cece eee eee e enna eeeeeteee teen eee 15 WV CICOMC 2 ccunscecusasencnances neat E E E E T T seuss sense qasse canes 15 Contents System requirements ccc ccc cece cece eee cnet eee e eee e tenets eeeeeeennes 15 VS CAIN GND oa boning deoelng cans ade agen bose d toned E E E E ene Lens aeeeteanes 15 LISTING OWING RGD ereere nari e E se ne eel ee eed erent wr emia cae een eekaneeaueens 15 OMNIS CMO 4 02 a sen ds n E EE ts tied Waban Ma eh Rdea een ees ia EA EEA 15 Whats INIS REID wcavowacuuwececenceces ne stowsaueaiaeuenceoeaaseversauereesoceseosumerboess 16 ICID ON NG WV C04 444546 sense sake ee toured an AAT Absa else hse tee ads tee ba eae 16 Overview Of ACID software 0 ccc ccc eee nent e eee eee e eee eeeeeeees 16 Mal WINOOW wosdcareageuanncecwagyauswneeweabedwrheawe ceeamndneer ness berate eorcoers 17 e elle eee ee ee ee E re en ee ee ee ee er ee rT 17 TRACKS cagvaia E A are tudareiens aeedoneies deere nies veeesernie cedars rele E 18 TACK VIGW ota ueatecert gr oso ake seas sate Fons a
460. tion Keys Description Keys Mute selected tracks Z Render to new track Ctrl M Solo selected tracks X Show hide bus tracks B Record Ctrl R Insert folder track Ctrl Alt F Cycle through effect automation E or Shift E Insert audio track Ctrl Q envelopes Insert new MIDI track Ctrl Alt Q Mixer commands Description Keys Description Keys Change selection of a mixer control Left Right Arrow Select multiple nonadjacent mixer Ctrl Left Right Arrow controls Move the right channel of the fader Ctrl Up Down Arrow Delete the selected bus or Delete for the selected mixer control assignable FX control Move the left channel of the fader Shift Up Down Arrow Move the fader of the selected Up Down Arrow mixer control for assignable effect controls moves the Out fader for the selected mixer control Select multiple adjacent mixer Shift Left Right Arrow controls MIDI commands Description Keys Description Keys Insert new MIDI track Ctrl Alt Q Trigger from MIDI Timecode Ctrl F7 Generate MIDI Timecode F7 Reset all MIDI ports Ctrl Alt F7 Generate MIDI Clock Shift F7 Show velocity information in MIDI F events Copy to new MIDI clip Ctrl Shift C Toggle inline MIDI editing mode G Chopper commands For more information see Using Chopper toolbar and keyboard commands on page 102 Surround Panner commands For more information see Moving the pan point on page 215 INTRODUCING ACID SOFTWARE 29 30 Chapter 1 Mouse scroll wheel shortcut
461. to the track For more information see Using clips with tracks on page 107 Mute button Clicking the Mute button amp temporarily suspends playback of the corresponding track allowing you to focus on the project s remaining tracks A muted track appears grayed out in the track view For more information see Muting tracks on page 48 Solo button Clicking the Solo button isolates the track during playback by muting the project s remaining tracks For more information see Soloing tracks on page 49 Surround panner FT In 5 1 surround projects the surround panner allows you to view and edit surround panning settings for a track Double click a surround panner to view the Surround Panner window and make fine panning adjustments Volume fader This dedicated volume fader controls how loud a track is in the mix A value of 0 dB means that the track plays with no boost or cut from the software Dragging the fader to the left cuts the volume dragging to the right boosts the volume INTRODUCING ACID SOFTWARE 19 20 Chapter 1 Pan slider This dedicated pan slider controls the position of a track in the stereo field Dragging the slider to the left places the track in the left speaker more than the right while dragging the slider to the right places the track in the right speaker You can choose among five panning types to determine how a track is panned For more information see Choosing stereo pan types on page 113
462. to their default values e Click the down arrow next to the Insert Hide Envelope button F next to the controller s slider in the track header and choose Reset All Envelope Points e Right click the envelope and choose Reset All from the shortcut menu You can set the default value for each continuous controller on the Output Settings tab in the Track Properties dialog For more information see Editing MIDI track properties on page 176 Deleting a MIDI controller envelope Click the down arrow next to the Insert Hide Envelope button F next to the controller s slider in the track header and choose Delete Envelope Adding a program change keyframe If you want to show or hide an envelope without deleting its settings click the Insert Hide Envelope button ihe To add a program change keyframe 1 Click the Program button and choose Insert Program Change Keyframe The program change keyframe row is displayed at the bottom of the track 2 Using the Draw A lor Envelope dg tool double click in the track s keyframe row to add a keyframe Jenny Rocks Program Change 3 To edit a keyframe double click it to display the Output Settings tab in the Track Properties window and then select the patch you want to assign to the keyframe Add a Sysex keyframe 1 Right click the track header choose Insert Remove Envelope and then choose Insert Sysex from the submenu 2 Using the Draw Ed or Envelope 3 tool dou
463. ton Fe The media file begins looped playback You can monitor its levels on the preview bus 3 Click the Stop Preview button m to end playback Previewing multiple media files You can use the Explorer s multiple selection preview feature to preview a group of files in the order that you select them 1 From the Options menu choose Preferences In ACID click the Other tab of the Preferences dialog and select the Enable multiple selection preview in Explorer window check box If you want you can enter values in the Number of times to repeat each Loop box Seconds of each One Shot to play box and Number of Beatmapped measures to play box to specify how different file types are previewed Click OK to close the Preferences dialog In the Explorer select the media you want to preview Hold Shift while clicking to select multiple adjacent files or hold Ctrl while clicking to select multiple nonadjacent files 4 Click the Start Preview button The first selected file in the list is previewed followed by each file in the list A file s icon changes to a Play icon to indicate which file is currently previewing Note To add the currently previewing file to your project press Ctrl Enter Press Enter to add all selected files to your project Using Auto Preview Click the Auto Preview button MI to toggle automatic playback of media files when you select them in the Explorer If your project is currently playing when you s
464. track s Mute button is selected the track is muted regardless of the mute automation settings Adding or removing mute automation 1 Select a track 2 From the Insert menu choose Audio Envelopes or Video Envelopes or right click in the track list and choose Insert Remove Envelope from the shortcut menu 3 From the submenu choose Mute A check mark is displayed next to the command and an envelope is added to the timeline 4 You can adjust the automation by editing the envelope in the timeline or by using the Mute button in the track header when the Automation Settings button is selected Adjusting mute automation settings 1 Select the Automation Settings button x The Mute button is displayed as 2 Click the Mute button to change the track s mute automation state at the cursor position The button behaves differently depending on the track automation recording mode e When the track automation mode is set to Off the button mutes the entire track e When the track has a mute envelope and the track automation mode is set to Read the button changes state to reflect the envelope setting during playback but cannot be adjusted e When the track has a mute envelope and the track automation mode is set to Touch or Latch the button edits the envelope setting at the cursor position USING AUTOMATION 127 128 Chapter 8 If you click the Mute button during playback the behavior varies depending on the selected autom
465. trl N Save project Ctrl S Create new project and bypass the Ctrl Shift N Open project properties Alt Enter Project Properties dialog Open existing project or media file Ctrl O Close the current project Ctrl F4 Magnification and view commands Description Keys Show Explorer window Alt 1 Show Chopper window Alt 2 Show Mixer window Alt 3 Show Video Video Preview Alt 4 window Show Media Manager window Alt 5 Show Track Properties window Alt 6 Show Surround Panner window Alt 7 Show Soft Synth Properties Alt 8 window Show Audio Plug In window Alt 9 Show Plug In Manager window Ctrl Alt 1 Show Groove Pool window Ctrl Alt 2 Show Clip Properties window Ctrl Alt 3 Shift focus forward through open F6 ACID windows Shift focus backward through open Shift F6 ACID windows Shift focus forward clockwise Tab through track list timeline bus track timeline and bus track list when track view or timeline has focus Shift focus backward Shift Tab counterclockwise through track list bus track list bus track timeline and timeline when track view or timeline has focus Explorer window commands Description Keys Add all selected files to the track Enter list Description Restore project magnification to the default settings Restore track height to a level where all track list controls are displayed Reduce timeline magnification so the entire length of the project and as many tracks as possible are dis
466. trol The Audio Plug In window appears Click the Edit Chain button E The Plug In Chooser dialog appears Add the desired plug in s to the chain Click OK to close the Plug In Chooser dialog The Audio Plug In window opens and displays the plug in chain USING THE MIXER 149 150 Chapter 9 5 Click a specific plug in and adjust the effect s parameters manually or choose one of the presets from the Preset drop down list For more information about effect parameters click the Plug In Help button E in the Audio Plug In window 6 Click the Close button l to close the Audio Plug In window Arranging plug ins on plug in chains The effect of plug ins placed on a chain is cumulative For example when a signal passes through a plug in it carries those settings through the next plug in and carries both settings through the next plug in and so on Because of this cumulative effect you may need to rearrange the plug ins on the chain so that one plug in s processing does not adversely affect the next one in the chain There is no right or wrong way to order plug ins and the chain s plug in order is strictly based on your preferences and desired output However certain plug ins function better at specific points in the chain For example the dither plug in typically works best as the last plug in on a chain 1 Click the FX button 8 on the mixer control The Audio Plug In window appears Audio Plug In q x Bus
467. ts on the track that use the specified clip e Right click a clip in the Clip Pool window and choose Select Timeline Events from the shortcut menu Selecting events using the Select All command Choosing Select All from the Edit menu selects all events in a project Selecting multiple events using the Selection tool You can drag the Selection tool across the track view to select events across multiple tracks This tool allows you to select events using three methods vertical horizontal and free selection Method Description Displays as Vertical Allows you to select all events on all Parallel dashed line spanning the tracks within an interval of time vertical length of the project Horizontal Allows you to select all events ona track Parallel dashed line spanning the or several adjacent tracks horizontal length of the project Free selection Allows you to select a group of adjacent Dashed line box events on adjacent tracks This is the default selection method 1 Click the Selection Tool button or choose Editing Tool from the Edit menu and choose Selection from the submenu Place the pointer on the track view The pointer displays as an arrow with an adjacent dotted box t Drag the mouse on the track view A dashed rectangular box appears on the track view and all events within and adjacent to it are selected 4 While holding the left mouse button click and release the right mouse button referred to as toggle
468. ts pane to store additional information about media files When you add custom columns they are added to the current library only For example if you wanted to keep track of which removable hard drive contained a media file you could create a custom Drive Number column to assign any numeric rating to a media file You could then use the Advanced section of the Search pane to search using the Drive Number value When adding media to a library you can choose to add this information by selecting the Add tags and custom columns from files check box in the Add Files to Media Library dialog 1 Right click the column headings and choose Custom Columns from the shortcut menu 2 Click the Add New Column button to add a custom column A new entry is added to the list 3 Inthe Name box type the name you d like to display as a column heading 4 Select the Type box and choose Text or Integer from the drop down list to indicate whether you ll store text or numeric data in the column 5 If you want to remove a custom column select an entry in the list and click the Delete Selected Columns button X The column and all data stored in the column is removed from the library 6 Click the OK button The column is added to the media library and the Search Results pane is scrolled to the right to display your new column Setting Media Manager options Use the Media Manager Options dialog to set options for working with the Media Manager tool
469. ts where the front to rear signal ratio is 6 dB 0 dB and 6 dB respectively As you adjust the Center fader the lines move forward or backward to compensate for the center channel gain Note The grid assumes that you re using a correctly set up surround system matched speakers and ideal positioning Variations in your monitoring system will cause inconsistencies between the graph and perceived output Automating panning You can automate panning on a track or mixer control by adding keyframes Keyframes are similar to envelope points in that they mark specific locations in the track where settings change However unlike envelope points keyframes appears just below the track to which they apply To add panning keyframes to a mixer control you must first view the mixer control in track view From the View menu choose Show Bus Tracks to view the bus track at the bottom of the track view For more information see Viewing bus tracks on page 152 Turning on panning keyframes Before adding individual keyframes you must first turn on the panning keyframes for the track or bus track 1 Select the track or bus track for which you want to automate panning 2 From the Insert menu choose Envelopes and choose Surround Pan Keyframes from the submenu An additional row appears below the track with a single keyframe positioned at the beginning of the project This single keyframe represents the current panning settings for the track da Electric
470. tton Editing MIDI track properties From the View menu choose Track Properties to display the Track Properties window The contents of the Track Properties window reflect the currently selected track Track Properties Output Settings Input Filters Clip Pool Controllers wE For MIDI tracks you can use the Output Settings tab to adjust MIDI controllers voices and drum maps You can use the Input Filters tab set up MIDI message velocity or quantize filters You can use the Clip Pool tab to organize each track s media and enable looped or one shot drawing for MIDI events For more information see Audio track properties on page 115 Configuring MIDI track output settings You can use the Output Settings tab on the configure which controllers can be automated add remove or hide envelopes set default values and set each envelope s default fade curve Controller automation Track Properties Output Settings Input Filters Clip Pool Controllers v GM2 Controllers Controller Def Envelope Curve Type Modulation 0 No Portamento Time 0 No amp 3 Channel volume No fe Pan No Expression No Damper Pedal No Portamento On Off No Sostenuto No Soft Pedal No Timbre Harmonic Intensity No Release Time No a Attack Time No Linear Fach Linear Fach Linear Fach Linear Fadi Linear Fach Switch Hold Fade Switch Switch Linear Fad Hold Fade Hold Fade amp 4444444 44
471. tton l choose Drum Maps and then Select Drum Map Changing the patch for a hardware synth If your track is routed to a hardware synth there are several ways to change patches Click the Program button and choose Synth Control of Patch if you want to change patches using the synth s controls e Click the Program button I and choose Use Program Change and Bank if you want to change patches by specifying the program MSB and LSB values Double click the values in the track header to edit them Stephanie ro daai W ce Auto All YB4e 01 M 4 0 0 100 il Center Lp eae If you ve created a patch map for your device click the Program button F and choose Use Device Patch Map to return to the device s patch map You can then choose a patch by clicking the Program button and choosing a patch from the menu For more information about creating patch maps and assigning them to hardware devices click here Selecting a drum map for a track 1 Right click the track header choose Insert Remove Envelopes and then choose Configure Controllers from the menu The Track Properties dialog is displayed 2 Under the Output Settings tab select Drum Map from the drop down menu 178 Chapter 11 3 Choose the drum map you want to use Track Properties Output Settings Input Filters Clip Pool Drum Map Controllers Voices Drum Map MIDI Crum Map Template k Device Description 4 Standard Set 6M2 Device Defaul
472. ty value right click a note event in the piano roll choose Velocity from the shortcut menu and choose the appropriate command from the submenu Command Description Set to Maximum Sets the velocity to 127 Set to Default Sets the velocity to 64 Set to Minimum Sets the velocity to 0 Set to Allows you to enter a custom velocity value Changing velocity data 1 Inthe lower left corner of the Piano Roll Editor tab click the drop down arrow and choose Velocity from the menu 2 Inthe area at the bottom of the Piano Roll Editor tab drag the top of a velocity bar up or down to change the velocity value You can also drag across multiple bars to change their values at the same time PLT A 4 k O gt gt ll WA E Velocity 12 J6 64 Js Setting pitch bend 1 Inthe lower left corner of the Piano Roll Editor tab click the drop down arrow and choose Pitch Bend from the menu 2 Inthe area atthe bottom of the Piano Roll Editor tab drag to draw your pitch bend curve To erase a curve right click and drag Pitch Bend 8 191 4 056 3 m en SPP ee ee lt o M a 4 k C gt gt Il K H 1770 Changing continuous controller information 1 In the lower left corner of the Piano Roll Editor tab click the drop down arrow choose All Continuous Controllers from the menu and choose a controller from the submenu WORKING WITH MIDI 189 190 Chapter 11 2 Inthe area at the b
473. u can paint an entire CD track or MIDI file on an ACID track with a single click 1 Add along file such as a CD track or MIDI file to your ACID project For more information see Adding media to the project on page 37 Click the Paint Tool button P The Paint tool is selected Press Ctrl and click in the track The entire file is painted onto the track at the position you clicked Note n a Beatmapped track the file is painted starting from the location you identified as the downbeat If the file contains pick up notes drag the left edge of the event to reveal audio before the downbeat Playing with duplicate tracks You can duplicate a track in your ACID project and then use the new track to create some interesting effects Detuning paired tracks Detuning a paired track is a quick and easy way to thicken an audio track without adding the additional processing of effects This trick works extremely well with synths pads strings and ambient sounds but you can also experiment with it to add body to drums basses and horns 1 Right click a track and choose Duplicate Track from the shortcut menu A copy of the track is added to the track list The new track is the currently selected track 2 Use the plus and minus keys on your numeric keypad to change the pitch of the duplicated track Octave intervals e g 12 12 24 typically sound best when working with pitched audio however experimenting with other less ordinar
474. u copy an event from track 1 Drone ambient 001 Hee O YP f2 Droe Vol 6 0dB li Pan Center i Q eee iol 600 Gal Pan cone I g Envelope Beat 02 Her OI vol 0 Fx Ambient 03 Vol If you copy an event from track 1 Click to position the cursor where you want to paste the events Click the track header of the track where you want to paste the contents of the clipboard From the Edit menu choose Paste Events are added at the cursor position and clips are added to the track for the pasted events as needed T Drone Ambient 001 O I Vol 6 0dB Pan Center j GB Envelope Beat 02 Oey GO Vol 6 0dB m Pan Center J SE rxambientos amp O Vol 6 0dB _ Pan Center i 2 6 0dB m Pan Center J B O 6 0dB jl Pan Center j and paste it into track the same track a new event is created on the same track No clips are created BB drone ambient 001 fey H O Envelope Beat 02 Sk OQ vol 6 0 dB Ni Pan Center I H Fx ambient Yolume sliderbge O Vol 6 0dB Pan Center 2 Drone m 6 0dB m Pan Center j S O 6 0dB l Pan Center and paste it into track 2 the event from track 1 is added to track 2 and a new clip is created for the new event Ml Drone ambient 001 Be O
475. ues for each program Notes e Within ACID MIDI values range from 0 127 If your device uses 1 128 subtract 1 when editing the program e Devices that use Sysex messages to change programs are limited to 128 programs 7 Click OK to close the dialog and save your changes Editing program maps 1 From the Tools menu choose Program Map Editor to display the Program Map Editor dialog 2 Load the program map you want to edit Choose a setting from the MIDI Device drop down list Click the Load button and browse to the map you want to edit Tip Ifyou want to create a program map based on an existing map load a program map and then click the Save As button pa to save a copy of the program map with a new name 3 To add programs to the map click the Add New Program F or Add New Drum Program P button to add a program to the table in the first available slot Note Ifa group is selected from the Voice Group drop down list the table lists only programs that belong to the selected group Any programs you add will automatically be associated with the selected group To remove a program from the map select a program and click the Delete button x 5 To edita program name double click the name and type a new value in the box To change a program to a drum program right click the program name and choose Drum Kit from the shortcut menu To change a drum program to a program right click the program name and choose Drum Kit from
476. ugh busses assignable effects and soft synth controls are used to accomplish different tasks they have many features in common You can adjust fader levels mute or solo audio and apply effects on all mixer controls In addition you can select multiple mixer controls to apply changes to several controls simultaneously You can also view mixer controls in track view in order to automate them Working with mixer controls You can adjust solo and mute mixer controls independently Adjusting faders You can adjust mixer control levels during playback and preview the results in real time In addition the stereo faders are split into two channels This allows you to adjust the levels of the left and right channels independently of one another For more information see Adjusting split faders in the mixer on page 53 Assignable effect controls contain two distinct faders each of which is split into two channels The left fader adjusts the level of the input signal entering the control while the right fader adjusts the output level Changing meter resolution You may specify the meter resolution at which mixer controls display their signal levels When a mixer control s meter resolution is changed all meters in the Mixer window automatically change to reflect the new resolution setting To change the meter resolution right click the meter and choose the desired resolution from the shortcut menu Setting levels When signals are routed through a m
477. um map is defined for a soft synth you can use the drum grid in the timeline to edit MIDI data Free Fingers Low Bonga High Bongo Ride Cum Wibra Slap Crash yi Cowbell Splash Cy Tambourine Ride Bell hi E A drum grid allows you to edit MIDI notes for soft synths that have drum maps defined A piano roll allows you to edit MIDI notes for most patches For more information see Editing MIDI on the timeline on page 167 Editing a drum map 1 From the Tools menu choose Drum Map Editor to display the Drum Map Editor dialog 2 Choose the drum map you want to edit e Select a drum map in the MIDI Drum Map Template list e Click the Open button to browse to an XML drum mapping file Tip Drum maps that belong to the GM2 kits are displayed with a a and cannot be edited 3 Ifyou want to edit the name of the drum map double click the name in the MIDI Drum Map Template column and type a new name in the box 4 Ifyou want to associate the drum map with a MIDI device double click the Device box and type the name of a MIDI device When you associate a drum map with a MIDI device the drum maps will be displayed automatically on the Output Settings tab of the Track Properties window when you choose Drum Map from the drop down list at the top of the page For more information see Editing duration on page 175 Note Be sure to type the device name identically in the Drum Map Editor and the Patch Map Editor For more inform
478. umbers on video thumbnails as drop down list Editing video events You have several video editing options to help you score your video WORKING WITH VIDEO 205 206 Chapter 12 Moving video events Drag the event to a new location along the video track Trimming video events Drag either end of the video event The video event stays in place but the beginning or end of the video moves You cannot trim the beginning or end of the event past the event s original end You cannot trim an event earlier than its starting point unless the event has been trimmed previously Slipping and sliding video events To help you picture what happens when you slip and slide events think of an event as a window to a media file The window can display the entire media file or a small section When the window displays only a portion of the media file you can move either the window or the underlying media to adjust the media played by an event e When you slip an event your event maintains its place on the timeline but the media file moves in the direction you drag e When you slide an event the media file maintains its place on the timeline but the event moves in the direction you drag Shifting the contents of video events slipping Hold Alt while dragging the video event to move the position of the video within the event The event itself does not move Slip trimming video events Hold Alt while dragging the beginning or end of a video event
479. uments an encoding template from the Template drop My Documents down list or click Custom to create a new template For more information see Creating 68 custom rendering settings on page 56 My Computer a File name MIDI Test Select or clear the following check boxes as My Netwerk EERE Wave Microsot C wav needed Template Default Template e Select the Save project as path reference in Description Render 44 100 Hz 16 Bit Stereo PCM wave rendered media check box if you want to a save the project path information with the i H Render options Save project markers with media file rendered file to easily return to your source BB Save a ae eehimedaie project if you use your rendered file in C Save each track as a separate file another project Note f you modify the project file after rendering the project data will no longer match the rendered file To edit a project using a path reference the project file and all media must be available on your computer Select the Render loop region only check box if you want to save only the portion of the project that is contained within the loop region The loop region does not need to be active for this option to work If the selected file type supports it you can select the Save project markers with media file check box to include markers and regions in the rendered media file If the selected file type supports it you can select the Save sections as r
480. und a quick method to turn off MIDI ports is provided much like the panic button on MIDI hardware devices From the Tools menu choose Reset All MIDI Ports to send a global Note Off command to all MIDI ports Tip Press Ctri Alt F7 to reset all MIDI ports Rendering projects with MIDI tracks To render projects that contain MIDI tracks route the MIDI tracks to soft synths DLS sets rather than to external MIDI devices MIDI tracks that are routed to external MIDI devices are not included in the rendered file For more information see Rendering projects on page 54 Playing MIDI from external devices You can receive MIDI input from an external device such as a MIDI keyboard You can then use a soft synth control with its DLS set or VST instrument or external MIDI device to output the sound from the external device Adding external devices as MIDI inputs Verify that the Enable Real Time MIDI command is selected in the Options menu From the Options menu choose Preferences The Preferences dialog appears Click the MIDI tab Select a device in the Make these devices available for MIDI input pane TA wy To enable MIDI thru for the selected input right click the entry in the MIDI Thru column and choose a MIDI thru device from the shortcut menu Note The MIDI thru device must be selected in the Make these devices available for MIDI track playback pane in order to appear in the menu You can choose more than one MIDI device for MI
481. updated at the cursor position until you stop playback Click Stop MM to end playback and stop recording automation Editing individual envelope points or keyframes Editing individual envelope points or keyframes gives you fine control over your recorded settings 1 2 Select the Automation Settings button amp on the track you want to edit Click the Automation Settings button and choose Automation Write Touch or Automation Write Latch from the menu Select the parameter you want to edit e Fora track envelope select the envelope tool lt s and click the envelope point you want to edit You can right click a point and choose Properties from the shortcut menu to display an effect s property page e Fora keyframe double click a keyframe to open its property page Adjust the control that corresponds to the envelope point or keyframe you want to adjust The selected envelope point keyframe is edited and all others are unaffected For track envelopes you can also edit the envelope directly in the timeline Setting the automation recording mode for a track 1 2 Select the Automation Settings button in the track header Click the Automation Settings button and choose a command from the menu to choose the automation mode Mode Tracklcon Description Off amp Automated parameters are ignored during playback When you switch to Off mode the control setting from the cursor position is used as a Static setting
482. urn to the ACID window Supported formats for rendering The following table briefly describes the file formats available for rendering a project Format Extension Description ATRAC aa3 A Sony proprietary audio compression technology AIFF File aif The standard audio file format for audio used on Macintosh computers GETTING STARTED 55 56 Chapter 2 Format MPEG 1 and MPEG 2 MPEG 1 Layer 3 Ogg Vorbis QuickTime RealMedia Sony Perfect Clarity Audio Sony Wave64 Video for Windows Wave Windows Media Audio Windows Media Video Extension mp3 O99 MOV FM pca w64 avi Wav wma WMV Creating custom rendering settings The Custom Settings dialog appears when you click Custom in the Save As dialog You can use the Custom Settings dialog to create custom encoding templates for many of the file formats available in the software 1 2 Description MPEG files are a format used when burning audio and video to a Video CD Super Video CD or DVD MPEG 1 and MPEG 2 file creation is supported through the use of the MainConcept MPEG plug in Note This format requires a separate purchase of the MainConcept MPEG plug in A highly compressed format used for portable digital players and Internet sharing of media 20 free MP3 encodes are provided After you have used the free encodes you must register the plug in to continue rendering MP3s A patent free audio encoding and streaming technology
483. urs at the cursor position or at the in and out points of a time selection When you split an event a new ending point is created for the original event and creates a starting point for the newly created event When you split an event the newly created events abut each other If Quick fade edges to prevent clicks is selected in the Event Properties dialog fades are added at the split point For more information see Changing event properties on page 70 eae ele oa ees Split position Two events However you may move either of the events which creates a gap ome SSS p Split position Two events Splitting at the cursor position splits all selected events that the cursor crosses on all tracks 1 Select the event s that you want to split 2 Place the cursor where you want the split to occur or make a time selection 3 From the Edit menu choose Split or press S The result of the split depends on how events were selected Splitting at the cursor position Splitting at the cursor position splits all events that the cursor crosses on all tracks Events before splitting Events after splitting ES Cursor position a After the split the three events become and split point six events Splitting one event Selecting a single event prior to splitting prevents other events from being split at the cursor s position Events before splitting Events after splitting Eventto HHH Only the selected be split A event splits
484. vent start times to the beat selected in the Quantize resolution drop down list e Select the Note durations check box to snap note durations to the beat selected in the Quantize resolution drop down list Select the Notes only check box to quantize note events alone When you select this check box the list editor does not quantize after touch control change meta NRPN RPN pitch bend poly pressure and program change events e Select the Apply to current selection only check box to quantize only the selected events Clear the check box to quantize all events within the list 5 Click Apply Deleting events Click an event row and click the Delete button IX Undoing and redoing You can easily undo and redo actions in the list editor by using keyboard shortcuts Press Ctrl Z to undo an action and press Ctrl Shift Z to redo an action Routing tracks to MIDI devices or soft synths Each MIDI track can be played through any external MIDI port or any DLS VSTi or ReWire 2 0 soft synth bus control in the Mixer window For more information see Using soft synth controls on page 144 1 Click the MIDI Output button A list of all the available MIDI devices and software synthesizers is displayed e Ifthe soft synth you want to use does not appear in the menu choose Insert Soft Synth to add a soft synth bus control to the project and route the track to the new synth Click one of the following links for more information abou
485. vents e Hold Ctrl while clicking the space between two groove events to create a new groove event to fill the space between the events e Right click and drag with the Groove tool to erase a groove event e Hold Ctrl and right click a groove event with the Groove tool to erase the entire event e Hold Ctrl and click a groove event with the Groove Erase tool S to erase the entire event e Zoom in to see groove markers in the groove events The markers represent the amount and direction of offset applied to beats Erasing groove events 1 Select the Groove Erase tool Ss 2 Click and drag the Groove Erase tool to erase a groove or hold Ctrl while clicking a groove event to erase the entire event Tips e Right click and drag with the Groove tool to erasea groove event e Hold Ctrl and right click a groove event with the Groove tool to erase the entire event e Hold Ctrl and click a groove event with the Groove Erase tool S to erase the entire event e Zoom in to see groove markers in the groove events The markers provide a visual cue to the mapped groove e You can also right click a track header and choose Remove Groove from Track from the shortcut menu to remove all groove events from a track Removing unused grooves from your project Click the Remove All Unused Grooves from Project button E to remove any grooves that have not been used in your project Removing a groove from your project 1 Select a gro
486. ves are represented by a line on the event Setting an event s volume envelope You can control an event s overall volume by setting an envelope at the desired decibel dB level 1 Place the mouse pointer at the top of the event The envelope cursor Ep appears 2 Drag the volume line to the desired level As you drag the volume line the event s decibel level is displayed Gain is 5 3 dB 3 Release the mouse to set the event s dB level After you set the event volume level you may change it later by dragging the envelope line Setting an event s fade in and out envelope curve You can control an event s envelope fade in and out characteristics by adjusting the event s envelope handles These handles allow you to control the length and dB level of fade ins and fade outs Also you can change the type of curve that the event uses to control the volume s fade characteristics 1 Place the mouse pointer on the upper corner of the event The envelope cursor appears 2 Drag the envelope cursor and position the envelope curve As you drag the cursor the following information is displayed e The event decibel level e The length in measures beats ticks of the fade in or fade out en Gin at 1 2 00 is 0 0 dB 3 Release the mouse to set the fade in or fade out characteristics EDITING EVENTS 71 72 Chapter 3 Changing the event s fade curve type You can set an event s fade curves fast linear slow smooth
487. video ACID has tools that allow you to adjust the tempo of a project to easily synchronize audio with specific video frames 1 Add your audio track s and video to your project 2 Ifthe Video Preview window is not displayed choose Video from the View menu 3 Click the Play button gt to begin playback 4 Press H each time you want to place a time marker at a frame you want to emphasize where an explosion is heard for example WORKING WITH VIDEO 207 5 Click the Stop button m to stop playback 6 Return to the leftmost time marker and fine tune its placement so it coincides exactly with the desired video frame Tip Holding Alt while pressing the right or left arrow keys allows you to step the cursor through your video by individual frames You may need to drag your time marker to the cursor to get it on the desired frame 7 Place the cursor at the point to which you want to synchronize your time marker For example you might want the frame that you marked in step six to coincide with a downbeat 8 Right click the time marker and select Adjust Tempo to Match Marker to Cursor from the shortcut menu The new tempo appears in the track list 9 Press Tto insert a tempo change marker The adjusted tempo is detected and inserted into the tempo marker s box The tempo change marker preserves synchronization between the time marker and location on the beat ruler as you perform editing further down the timeline For more info
488. view displays real time in several formats You may change the ruler format in one of the following ways e From the View menu choose Time Ruler and choose the desired format from the submenu e Right click the time ruler and choose the desired format from the shortcut menu In addition to right clicking the time ruler in the track view you can use this technique on the time rulers in the Chopper and Track Properties windows The following table describes the available time formats Time format Description Samples Displays the time ruler in samples Time Displays the time ruler in hours minutes seconds milliseconds Seconds Displays the time ruler in seconds Time amp Frames Displays the time ruler in hours minutes seconds frames with a frame rate equal to that of your video Absolute Frames Displays the time ruler in total frames from the beginning of the project Feet amp Frames 16 mm Displays the time ruler in feett frames at a rate of 40 frames per foot Feet amp Frames 35 mm Displays the time ruler in feett frames at a rate of 16 frames per foot SMPTE Film Sync Displays the time ruler in hours minutes seconds frames with a frame rate of 24 frames per 24 fps second for synchronizing with film SMPTE EBU 25 fps Displays the time ruler in hours minutes seconds frames with a frame rate of 25 frames per second for European Broadcasting Union SMPTE Non Drop Displays the time ruler in hours minutes seconds frames with a fr
489. visions as you drag Hold Shift while dragging to override snapping press Shift after you click For more information see Using snapping on page 94 Flipping envelopes You can flip an envelope to invert the envelope around its center 1 Right click an envelope A shortcut menu appears USING AUTOMATION 133 134 Chapter 8 2 From the shortcut menu choose Flip All Points Tip f you want to flip only particular points on an envelope select the points using the Envelope tool right click and choose Flip Selected Points from the shortcut menu For more information on the Envelope tool see Using the Envelope tool on page 134 Changing envelope fade curves You may set the type of fade curve that occurs between envelope points linear fast slow smooth sharp or hold To change the fade curve right click an envelope between two envelope points and choose the appropriate fade curve from the shortcut menu Locking envelope points to an event From the Options menu choose Lock Envelopes to Events if you want envelope points to move with an event when it is moved along the timeline Using the Envelope tool The Envelope tool F is designed to manipulate multiple envelope points Use the Envelope tool when you want to edit envelope points but do not want to change other elements of the project With the Envelope tool selected events cannot be moved or edited Selecting and moving envelope points To select multiple envelope
490. w hidden files and folders radio button is selected on the View tab of the Windows Folder Options control panel You can use this file as a backup or to share your keyboard shortcuts with other ACID users Deleting a keyboard mapping Choose a mapping from the Keyboard mapping drop down list and click the Delete button to remove the selected keyboard mapping Tip You cannot delete the default ACID keyboard mapping Importing a keyboard mapping Copy an ACID 6 0 keyboard mapping ini file to the C Documents and Settings user name Local Settings Application Data Sony ACID Pro 6 0 folder Tip The Application Data folder is not visible unless the Show hidden files and folders radio button is selected on the View tab of the Windows Folder Options control panel The next time you start ACID the new keyboard mapping will be available from the Keyboard mapping drop down list in the Customize Keyboard dialog Resetting the default keyboard mapping Choose Default from the Keyboard mapping drop down list and click OK to restore the default configuration Appendix B Using Control Surfaces with ACID A control surface is a hardware device that uses knobs faders and buttons to control user interface elements that are normally controlled with a mouse Using a control surface lends a tactile feel to your editing sessions Unlike keyboard shortcuts which determine the shortcut s behavior based on the portion of the ACID window that has
491. wsaoer ooeuen neues 77 TABLE OF CONTENTS 3 4 TABLE OF CONTENTS CIGAUING ANd aT ENA EEA seeds caaade entices bani eeese pines teense neene ee 77 Applying a tag Oa Meda THe srssrresiterrat ernaten een OSATEN TORTIE EEEE 77 Removing a tag froma Media file ccc ccc ccc eee eee een nent eeennees 78 Deleting a tag from a library 0 ccc ccc ccc cece ence eee eee e eee eeeneeteeeees 78 Moron T SUDIAGS aeaaee EEEE tees eevaeraenns ease oneatun 79 Arranging tags in the tag tree 0 ccc ccc ccc eee eee e eens sees tees eeeeeeeeeeeeeas 79 Editing tag names OF IMAGES c05 c6s cu aeseeadideaeetean cine CAEI RNT 79 Viewing or creating Palettes 2 0 ccc ccc cece eect e eee e eee eeeeeeeeee 79 Saving tags and properties to Media files ccc cee cece ene e eee ee eeees 80 Backing up your media librarieS 0 ccc ccc ccc cece eee e eee e eee eeeeeeees 80 Opening a Reference Library ccc ccc cece cece eee e eee e eee eeeeeeteneeenees 81 Using the Sony Sound Series Loops amp Samples reference library cc cece cece eens 81 Searching for media HES ns 00505 cine ceeeeanees ohne ered ooeneuwns heeds bend etande canes 81 Searching USING a keyword ccc ccc ttit Er Vit EKE ree EREE VEN aier 81 Searching USING TAGS ico oe dyuhina ead ewdswedesed wa tee E E E AE E 82 SONG Seal CH resus rire a N N NENN 82 Viewing previous searches seeircicrereisirii eccere tiii neer eee eee eee eee eee eeeeeeeee 83
492. xer control or group of controls Tip Press Ctrl and click the Solo button to solo only the selected mixer control and restore any other soloed controls If the selected mixer control is already soloed press Ctrl and click the Solo button to restore all controls Adding effects to soft synth mixer controls You can add DirectX or VST compatible plug ins either individually or as a chain to a mixer control You can build plug in chains from any DirectX compatible plug ins installed on your system You can add plug ins individually or as pieces of a chain to a mixer control at any time and once you have added them you can reorder them remove them and combine them with additional plug ins to achieve the desired effect Adding a plug in to a mixer control results in the track signals assigned to that control being processed by the plug in However plug ins assigned at the track level are processed before plug ins added at the mixer level For more information see Using clips with tracks on page 107 Important Be aware that using non in place plug ins such as Time Stretch Pitch Shift without preserving duration and some Vibrato settings will cause audio to play out of synchronization with the waveform display in the timeline and with other tracks If an effects chain includes non in place plug ins the effects chain icon will be displayed as a When using ACID as a ReWire device any effects chain that includes non in place plug in
493. y driver model developed by Steinberg Media Technologies AG ASF Stream Redirector file See Redirector File The attack of a sound is the initial portion of the sound Percussive sounds drums piano guitar plucks are said to have a fast attack This means that the sound reaches its maximum amplitude in a very short time Sounds that slowly swell up in volume soft strings and wind sounds are said to have a slow attack A decrease in the level of a signal The Audio Compression Manager from Microsoft is a standard interface for audio compression and signal processing for Microsoft Windows The ACM can be used by Windows programs to compress and decompress WAV files An audio file format developed by Apple See Proxy File When discussing audio equalization each frequency band has a width associated with it that determines the range of frequencies that are affected by the EQ An EQ band with a wide bandwidth affects a wider range of frequencies than one with a narrow bandwidth When discussing network connections refers to the rate of signals transmitted the amount of data that can be transmitted in a fixed amount of time stated in bits second a 56 Kbps network connection is capable of receiving 56 000 bits of data per second A file that has tempo information added to it as a result of going through the Beatmapper Wizard APPENDIX D 269 270 APPENDIX D Beats Per Minute BPM Bit Bit Depth Buffer Bus
494. y intervals may produce surprising results When working with non pitched audio intervals do not matter thereby allowing you to freely experiment with radical pitch shifting This technique typically works best when tuning the duplicate track to a lower octave than the original track but you can also experiment with raising the pitch of the duplicate track Panning in conjunction with detuning Few things are as uninteresting as a series of tracks panned down the middle of a stereo image Particularly after detuning a paired track you should experiment with spatially positioning the tracks using the panning control on the multipurpose slider or a pan envelope Panning each track to a specific channel produces a nice wide aural effect If you are looking for something a little more dynamic position the original track anywhere in the stereo image and use a pan envelope to sweep the duplicate track from the left channel to the right channel of the mix For more information see Using track automation envelopes on page 113 APPENDIX C 261 262 APPENDIX C Duplicating with offset Another way to add interesting dynamics to a project is to duplicate tracks and add an offset to one of the pair This trick works well with most instrument loops and allows you to create different levels of effect For example e Configuring a slight offset between duplicate tracks creates a natural chorus effect e Configuring small offsets creates various rever
495. y is the timeline The track view contains other elements which are described in the following sections Marker bar fa ar ae 571 651 RUI Vis va en TPT E POR TT NP i ca i bi dh ai aaa AQ JURRYARB RYT LATIN PERCUSSION PROMO 01 Jaek rle ktt HME Ai HB Hb LATIN PERCUSSION AROMO 01 i oS pines ZERO GRAVITY BEATS wtsPROMO 03 ll baba wk ha a baba baba ay oa da cl dish diel AA B ul ds ds ds da ln ho di dl di bleee eet llod II o edeten ou oo 01 30 oo 01 45 bo 02 00 H i ii Zoom si gt gt i E K OF controls WW dk cil Transport Time ruler bar if displayed Marker bar The marker bar runs the length of your project and contains the tags for markers and regions positioned along the project s timeline Beat ruler The beat ruler allows you to place events in reference to the musical time of bars and beats This ruler is fixed and does not update when you change the tempo This allows the events in the tracks to maintain their size when you adjust the tempo Time ruler The time ruler provides a timeline for your project This ruler can show real time in many different formats For more information see Changing the time ruler format on page 223 The ruler changes with tempo since the number of beats and beats per second of real time changes with tempo Transport bar
496. you need to move several scattered events by an equal amount within the project 44 Chapter 2 Holding Shift allows you to select multiple adjacent events Selecting any two events while holding Shift automatically selects all events located between the selected events Events may be selected from the same track or across tracks This method is useful when you want to move several adjacent events by an equal amount within the project Selecting multiple events using the Select All on Track command Right clicking any track in the track view and choosing Select All on Track from the shortcut menu selects every event on the track Selecting multiple events using the Select Events to End command Right clicking an event in the track view and choosing Select Events to End from the shortcut menu selects every event on the track after the selected event You use this command across multiple tracks by holding Ctrl to click events on several tracks and then right clicking and choosing Select Events to End from the shortcut menu Selecting events that use a specified clip Perform any of the following actions to select events created from a clip e Right click an event in the timeline and choose Select Events Using This Event s Clip from the shortcut menu to select all events on the track that use the same clip as the selected event e Right click the timeline choose Select Events Using Clip and then choose a clip from the submenu to select all even
497. you will be directed back to the Publish feature 1 From the File menu choose Publish The Publish Setup dialog displays 2 Log into your publishing account or follow the on screen instructions to create one 3 Select the appropriate radio button to specify whether the song to be published is the current ACID song ora different song e To publish your current ACID song choose a streaming format and bit rate e To publish a different song enter the path to the song or click Browse to locate the file This song must already be in a streaming format 4 Click Next If you are publishing the current ACID song it is rendered in the format and bit rate you specified A window appears from the publish provider with directions for completing the publishing process 5 Follow the instructions provided by the publish provider The file begins uploading to the provider A progress dialog informs you when the upload is finished 6 Click OK The publish provider provides a link to the song on their Web site however this may vary depending on provider Writing to CD You can burn your projects to CD using supported CD R CD RW drives You can burn CDs for multiple or single track projects and build audio CD layouts automatically or manually You can also create video CDs that can be played in many home DVD players and on computers with a CD ROM drive and VCD player software and multimedia CDs that can be played in any computer with the appropriat
498. ype for recorded audio drop down list on the Audio tab of the Preferences dialog to indicate whether you want to create Beatmapped clips of one shots when recording audio e Use the Record action when nothing is armed drop down list on the Audio tab of the Preferences dialog to indicate whether you want to create an audio track a MIDI track or do nothing if you click the Record button _ when no tracks are armed Recording into an empty track 1 Select a track Alternately to record to a new track choose Audio Track from the Insert menu RECORDING AUDIO 157 158 CHAPTER 10 2 Place the cursor on the timeline where you want to begin recording 3 Arm the track by clicking the Arm for Record button on the track 4 Start recording by clicking the Record button on the transport bar Depending on the recording selection a waveform is created along the timeline as you record into the armed track s c gt P il W DW Bass c 1 amp O I Start sto l PIN gt Recorded waveform n t stop orang Vol 6 0dB ii Pan Center amp 5 Stop recording by clicking the Record button again or the Stop button m on the transport bar 6 A small dialog opens displaying the name and location of the file or files that were just created Click Done to return to the main workspace Recorded Files Jeg DeMly Documents Sony ACID Pro 6 0 Projects Delete removes selected file Delete Al Rename c

ACID 6.0a User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents