7” Open Frame User Manual
Contents
1. Frame Rate 25 frames per second Up to 30 frames Audio code MPEG 1 Audio layer 3 160Kbps Format JPEG Resolution 720X400 Accessories Extends the USB socket by 50cm a variety of PB are available Please log on www i display com for more info Plays the content stored in folders 1 6 Each PB plays content from a different folder according to the socket they are connected to When connected to the open frame the unit will goes in to SB mode black screen When the MS detects movement it plays the content stored in folder MS one time and then goes back to SB mode unless it detects movement again Used to enhance the volume When external speakers are connected the sound comes out from the internal and external speakers together Enables the use of the remote control by which the following functions can be changes volume brightness contract Quick Start 9 All accessories are purchased separately For more information on the range of accessories please log on to www i display com Troubleshooting Not recognized USB SD card 1 Make sure the content is copied in right folders see page 8 2 Inside content is not compliant with video audio picture formats see page 9 3 Disconnect any power supply for 1 minute insert the USB SD card first and then connect the power supply 4 USB SD card is damaged try to inserting another USB SD card Cannot copy content to SD card 1 Make sure the SD card is unlock2. 2 Make sure the content is copied in folders named 0 inside SD card Cannot turn on LCD 1 Make sure the power supply unit is plugged into electricity 2 Make sure to turn on power switch in the back Remote controller does not work Make sure to take off the plastic tab from the remote controller Power Supply Unit Electrical Data Power Adaptor Input 100 240V 50 60Hz 0 3A Output 5V 1500mA Produced by HONOR ELECTRONIC CO LTD DISPLAY Interactive Digital Displays For further information or support please contact support_iView i display com Outform All Rights Reserved
3. new content automatically The USB stick can now be removed Connect a push button to one of the 6 push button sockets Press the push button NB when a motion sensor is connected to the unit it will pick up movement within 5 meters and start to play the movie allocated to the motion sensor Important note The video file name is not important but the folder name must be as stated Make sure the video content is in a format supported by the unit Insert an SD card to the unit Make sure the content is copied onto the SD card in the following manner folder 0 is for the loop movie folder 1 6 are for Push Button activated movies folder MS is for Motion Sensor activated movie The unit will play the content of the SD card automatically Prepare a USB stick with the new content Make sure the content is copied in folders named 0 1 2 3 4 5 6 MS inside USB stick Folder 0 is for the loop movie folder 1 6 are for Push Button activated folder MS is for Motion Sensor activated 8 Quick Start Connect the USB stick to i Display USB socket The content which was in the internal memory will be deleted and the new content in the USB stick will be copied automatically After the content is copied the unit will start playing the new content automatically The USB stick can now be removed Important If you no longer require the old content to be played you will need to delete the old content Resolution 720X400 Video Format XVID AVI
4. Display eyeholes for wall mounting B Display standard screw holes for display accessories C Speakers Components Features Motion Sensor Jack 2 5V power output Jack 3 IR receiver for remote control Jack Push Buttons Jack 5 Speakers Jacks 6 Earphone Jack 7 9V DC input Jack SSS Brightness To adjust the brightness increase decrease 2 Volume To adjust the volume increase decrease 3 On Off power on off SD card 2 Mini USB 3 USB port Features Operating Instructions Plug into power supply Display will automatically load movie and play If you get a picture with the words Please insert S D or USB stick please go to Playing other movies change content Prepare a USB stick with new content Make sure the content is copied onto the USB stick in the following manner folder 0 is for the loop movie folder 1 6 are for Push Button activated movies folder MS is for Motion Sensor activated movie Connect the USB stick to the Display USB port The content which was in the internal memory will be deleted and replaced with the new content being copied from the USB stick this process will be shown on the screen After the content is copied the unit will start playing the
5. equirements changes or modifications not expressiy approved by manufacturer could void the user s authority to operate this product This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body A Dangerous voltage constituting a risk of electric shock is present inside this equipment C This mark is applied to show the equipment conforms to European safety and electro magnetic compatibility standards A There are important operating and maintenance instructions in the literature accompanying this equipment The main plug shall be the main disconnect device and shall remain operable at all times Never let anyone push objects into holes and ventilation slots Do not expose this product to dripping or splashing or place any objects filled with liquids on or near the product Do not place a naked flame source such as lighted candles on or near this product Do not attempt to repair this product yourself always get a qualified service agent to carry out adjustments or repairs FCC Radiation Exposure Statement Warning 5 Overview rit LD 1 7 Digital Open Frame 2 Power Supply Unit 3 Screwdriver 4 User Manual 5 Mid frame nl JUUU A i DISPLAY O A2 D g oO A
6. i DISPLAY Interactive Digital Displays 7 Open Frame Outform All Rights Reserved Index vu B B a 10 10 Main Supply Main Adaptor FCC Radiation Exposure Statement Warning Components Features Quick Start Thank you for purchasing an Outform i Display 7 open frame unit Before you start to use your new i Display 7 open frame unit please read the user manual carefully to enjoy i Display performance and a longer service life Keep this manual in a safe place for future reference In the interest of continually improving our product i Display reserves the right to update or modify information contained in this manual The screen and the illustration shown in this manual were produced during the development stage and may differ from the actual product Unless otherwise specified For further information or support please contact support i display com Safety and Warnings This equipment is designed to operate from a 100 240 Volt 50 60Hz AC main supply The use of other power sources may damage this equipment Check that the voltage marked on the rating plate located at the rear of the power adaptor states 100 240V The manufacturer will NOT accept responsibility for damage or injury caused by connecting to the wrong voltage FC This device complies with CE FCC regulations The power adaptor supplied is compatible with a standard main socket NB If the power adaptor or
7. lead gets damaged it must be replaced by a qualified service agent with an approved adaptor of the same type and rating Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 This device must accept any interference received including interference which may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interfer ence to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encour aged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver 4 Main Supply Main Adaptor Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help In accordance with FCC r
Download Pdf Manuals
Related Search