User Manual
Contents
1. Bluetooth BLACK DIAMOND ME100 MULTIPOINT HANDS FREE KIT USER MANUAL 1 About the Black Diamond ME100 Hands Free Kit The Black Diamond ME100 Hands Free Kit is compatible with Bluetooth mobile phones The Multpointfunction enables you to connect up to two Bluetooth mobile phones to the Hands Free Kit at the same time Fully portable it is an ideal wireless communication solution for in car or office use within a maximum range of 10 meters Built in with Echo Cancellation and Noise Suppression the Black Diamond ME100 Hands Free Kit provides you with impeccable sound quality in full duplex mode Make sure thatyour Hands Free Kit is fully charged before usingit Use only the charger provided do not use chargers from any other devices as this might damage the device A full charge is approximately 3 hours 2 Charge Your Hands Free Kit 1 Charge via USB cable into USB port or 2 Charge via USB cable into car charger socket 3 The LED light indication goes off when the device is fully charged 3 Appearance and Function 1 Speaker 5 Mute Button 2 Microphone 6 MFB Button Multi Function Button 3 LED 7 Volume Increase V 4 Charging Socket 5 pin USB 8 Volume Decrease V 2 4 Installing the Battery 5 Installing on a Sun Visor 6 Powering Up 1 To turn ON the Hands Free Kit Press and hold the MFB button for 4 seconds until you hear a short beep T2. 2 Never allow children to play with the Hands Free Kit Small parts may be a choking hazard 3 Observe all signs that require an electrical device or RF radio product to be switched off in the designated areas These could include hospitals blasting areas and potentially explosive atmospheres 4 Turn off your Hands Free Kit prior to boarding an aircraft Do not use your Hands Free Kit in an aircraft 5 Never place or store the Hands Free Kit over the area of the automobile s safety airbag deployment or it may cause serious injury when a safety airbag deploys 17 Product Specifications Bluetooth Compliance Bluetooth 2 1 EDR specifications Operating Frequency Band 2 4GHz 2 48GHz unlicensed ISM band Battery Replacement Use Nokia compatible BL 5B battery Output Power Class 2 Power Output up to 10 meters Support Profiles HSP and HFP Profiles Stand by Time Up to 1000 hours 41 days Talk time Up to 12 hours Battery Charging Time About 3 hours Charger Voltage DC5 0V 400mA Battery Type 650mA BL 5B Rechargeable Lithium Battery 18 Warranty This product is guaranteed to be free from defects in workmanship and parts for a period of 12 months The rechargeable battery is guaranteed for 6 months Defects that occur within this warranty period under normal use and care will be repaired or replaced at our discretion
3. 3 seconds to mute the Hands Free Kit The red LED will steady on during mute mode b Un Mute press the Mute button for 3 seconds during mute mode to un mute the Hands Free Kit 11 Multipoint Feature 1 Activate Multipoint Connection The default setting of the Hands Free Kit s multipoint function is off Please activate the multipoint function for connecting with 2 mobile phones at the same time Multipoint On Under standby mode press and hold V button for 3 seconds until you hear a beep After you turn on the multipoint function the Hands Free Kit will automatically connect to the last 2 mobile phones which were paired to the device Multipoint Off Under standby mode press and hold the V button for 3 seconds until you hear a beep The Hands Free Kit will turn off the multipoint function and power off automatically The next time you power on the Hands Free Kit it will connect to the last connected Bluetooth device 2 Multipoint Pairing First mobile phone Pair the Hands Free Kit with one of the enabled Bluetooth phones Second mobile phone Power off the Hands Free Kit Press and hold the MFB button for 6 seconds to enter pairing mode again to pair and connect with the second mobile phone Connect with the first paired mobile phone tho the Hands Free Kit 4 Using the Secondary Mobile Phone with the Hands Free Kit When connected with 2 Bluetooth mobile phones the first connected phone becomes the p
4. he blue LED will flash 5 times and then the Hands Free Kit will automatically connect to the last mobile phone Note Do not hold the button down for more than 8 seconds when turning the Hands Free Kit on or else it may switch to its pairing mode Ifthis happens turn off the Hands Free Kit and repeat the process for turning the Hands Free Kit on 2 To Turn OFF the Hands Free Kit Press and hold the MFB button for 4 seconds until you hear a short beep The red LED will flash 5 times before power off 7 Pi g 1 Pairing With Bluetooth Mobile Phones Pairing is the process of connecting your Hands Free Kit with your mobile phone Before using the Hands Free Kit with your mobile phone you must pair both devices Ifyou wish to use your Hands Free Kit with a different mobile phone you must reinitiate the pairing process with your intended Bluetooth mobile phone a gt 2 Pairing Hands Free Kit to Mobile Phone 1 Ensure that Hands Free Kit is turned off switch to pairing mode by holding onto the MFB button for 6 seconds both Blue Red LED lights appear 2 The LED lights will blink simultaneously in pairing mode 3 Turn on the mobile phone and place it within 10 meters to the Hands Free Kit 4 Initiate the mobile discovery feature on your mobile phone Refer to your mobile phones user guide 5 Enter the default pin code 0000 when prompted by your mobile phone system for pin code 6 The blueLED blinks at a regular
5. hes once every 3 Standby Low Voltage seconds Blue LED flashes once every 6 Talk in Progress seconds Mute Red LED steady on The red and blue LEDs flash Pairing in Progress alternatively Charging in Progress Red LED steady on Charging Completed Off 14 Restore to Default Settings To restore your Hands Free Kit to its original settings press and hold both V and V buttons for 10 seconds until the blue LED light indication flashes rapidly Press and hold both V and V buttons for a further 3 seconds and the Hands Free Kit will power off automatically 15 Care and Maintenance 1 Do not expose the Hands Free Kit to liquid moisture or humidity as it is not waterproof 2 Do not use abrasive cleaning solvents to clean the Hands Free Kit 3 Do not expose the Hands Free Kit to extreme temperatures 4 Do not expose the Hands Free Kit to contact with sharp objects as this will cause scratching and damage lt p gt 5 Do not attempt to disassemble the Hands Free Kit as it does not contain serviceable components 6 If you do not use the Hands Free Kit for long periods of time be sure to store it in a dry place free from extreme temperatures humidity and dust 16 Safety Information 1 Check local laws regarding use of a mobile phone and speakerphone while driving If you use the speakerphone while diving ensure your attention and focus remains on your responsibility of driving safety
6. ing the Hands Free Kit Making Calls From Your Mobile Phone Dial directly from your mobile phone The call is automatically connected to your Hands Free Kit Making calls using voice dialling Dependent on mobile phone support Press the MFB button once and call outthe name of the person for the call to be placed Receiving Calls When your mobile phone rings press the MFB button onthe Hands Free Kit to connect the call 4 Ending Calls When you have finished your call press the MFB button on the receiver to disconnect the call 5 Rejecting Calls Hold onto the MFB button for 3 seconds to reject an incoming call 6 Redial Last Outgoing Call Press the MFB button twice and the call is connected 7 Transferring Calls Hands Free Kit to Mobile Phone During a call simply press both V and V buttons once and the call is routed to your mobile phone Mobile Phone to Hands Free Kit Press both the V and V buttons once and the call is routed back to your Hands Free Kit 8 Adjusting The Volume To increase the volume Press the V symbol volume button to increase volume by one level repeat this procedure until you have reached the desired level To decrease the volume Press V symbol button to decrease the volume by one level repeat this procedure until you have reached the desired level 9 Mute amp Un Mute a Mute During a call press the Mute button for
7. interval when both devices are successfully paired NOTE if the pairing mode is not completed within 2 minutes after the pairing mode is activated the Hands Free Kit will power off automatically Please repeat the steps above to pair the Hands Free Kit and Mobile Phone again 8 Connection Link Between Hands Free Kit And Mobile Phone After pairing is completed the Hands Free Kit will be in standby mode Before you place or answer a call if the headset icon is not shown on your phone screen please follow the steps below to activate the Bluetooth connection link through your mobile phone or Hands Free Kit until the headset icon is on your screen 1 On phone Select the BT Speaker from the paired list on your phone 2 On Hands Free Kit Short press the MFB button and select Accept on your phone screen to accept the connection 9 Disconnection between Hands Free Kit and Mobile Phone When you need to connect your Hands Free Kit to another Bluetooth enabled mobile phone please follow the steps below to disconnect the Hands Free Kit with the pre paired mobile phone 1 Power off the Hands Free Kit 2 Select Disconnect on the Bluetooth device list on your mobile phone to remove the connection Note When losing the connection link the Hands Free Kit will be automatically powered off in 10 minutes The blue LED will flash twice every 3 seconds when the Hands Free Kit is not connected with your mobile phone D 10 Us
8. rimary phone that can use the MFB button for voice dial and redial The second connected phone is the secondary phone that will use the V button for voice dial and redial Voice Dial Press V button once to activate the secondary phone s voice dialling function Re dialling Press V button twice to redial the last outgoing number of the secondary phone Note 1 When the Hands Free Kit is in Multipoint mode and connected with only 1 mobile phone it can also enter voice dial function by pressing the V button once or to redial the last the number called press V button twice The multipoint Hands Free Kit can be paired with 2 mobile phones at the same time When one of them receives an incoming call the other phone will be disconnected from the Hands Free Kit but will resume connection automatically after the first one has finished the phone call 12 Low Voltage Protection of Battery When the voltage of the battery decreases to 3 3V the red LED will flash every 3 seconds and the Hands Free Kit will be powered off automatically when the voltage in under 3 0V 13 LED Indication Hands Free Kit Status LED Indication Power Off Mode lOff Power On Blue LED flashes 5 times rapidly Power Off Red LED flashes 5 times rapidly Standby Mode Blue LED flashes once every 3 seconds Standby disconnect Blue LED flashes twice every 3 Bluetooth device seconds Red LED flas
Download Pdf Manuals
Related Search