PowerStar User Manual Uninterruptible Power Supply
Contents
1. Replace the battery with the same to high temperature operation type of battery environment or improper Reconnect the power cord properly Alarm continuously sounds when the mains is normal When power fails back up time is shorten operation to battery The mains is normal but Power cord is loose green LED is flashing2. below 3 5mA Attention hazardous through electric shock Also with disconnection of this unit from the E a mains hazardous voltage still may be accessible through supply from battery The battery Specifications supply should be therefore disconnected in the plus and minus pole at the quick connectors of MODEL POTARGSO EEL TAR ROU CAPACITY 650 VA 360W 850 VA 480 W 1000 VA 600 W knowledgeable of batteries ane the required safety precautions Keep unauthorized Sea Acc glia E CAUTION When replacing the batteries use the same number and type of batteries Voltage Regulation 10 CAUTION Internal battery voltage is 12VDC Sealed lead acid 6 cell battery CAUTION Do not dispose of batteries in a fire The battery may explode Do not open or the battery when maintenance or service work inside the UPS is necessary CAUTION Servicing of batteries should be performed or supervised by personnel mutilate the battery or batteries Released electrolyte is harmful to the skin and eyes BATTERY CAUTION Unplug the UPS prior to cleaning and do not use liquid or spray detergent Type amp Number 12 V 7 AH x 1 12 V 9 AHx 1 12 V 7 AH x 2 CAUTION A battery can present a risk of electric shock and high short circuit current The 4 6 hours recover to 90 capacity following precaution should be observed before replacing batteries PHYSICAL 1 Remove watches rings or other metal objects Dimension DxWxH mm 287 x 100 x 142 350 x 146 x 160
3. 2 Use tools with insulated handles Net Weight kgs 8 0 3 Wear rubber gloves and boots MANAGEMENT 4 Do not lay tools or metal parts on top of batteries USB Port Supports Windows 2000 2003 XP Vista 2008 7 Linux 5 Disconnect charging source prior to connecting or disconnecting batteries terminal Unix and MAC Installation amp Operation Initial Set up After unpacking the unit please avoid placing the unit in direct sun light excessive heat excessive humidity or in contact with fluids of any type Place the unit away from other equipment at least 20 cm to avoid interference Place the unit to avoid Direct sunlight Excessive heat Excessive humidity or contact with fluids Connect Utility Plug the UPS into an electrical outlet that does not share a circuit with a heavy electrical load Please allow the UPS to charge at least 6 hours prior to use Connect Equipment Connect critical equipment to Battery Backup Sockets These battery backup sockets provide battery back up and surge protection In case of power outage battery power is automatically provided to these outlets Connect minor less critical devices to Surge Protected Socket Power is not supplied to this socket when the utility fails NOTE Please DO NOT connect scanner or printer into Battery Backup Sockets Connect Com Port and Install Software Connect the communication port cable end to the communication port located on th
4. Important Safety Warnings This manual contains instructions and warnings that should be followed during the 7 BGAN The British Power Conversion Company installation operating and storage of the UPS system Please keep this manual for further reference PowerStar User Manual CAUTION To prevent the risk of fire or electric shock install in a temperature and humidity controlled indoor area free of conductive contaminants See the specifications for the acceptable temperature and humidity range CAUTION To reduce the risk of overheating the UPS do not cover the UPS cooling vents and avoid exposing the unit to direct sunlight or installing the unit near heat emitting appliances such as space heaters or furnaces CAUTION Do not attach non computer related items such as medical equipment life support equipment microwave ovens or vacuum cleaners to UPS CAUTION Do not plug the UPS input into its own output CAUTION Do not allow liquids or any foreign object to enter the UPS Do not place beverages or any other liquid containing vessels on or near the unit CAUTION In the event of an emergency press the OFF button and disconnect the power cord from the AC power supply to properly disable the UPS g g CAUTION Do not attach a power strip or surge suppressor to the UPS Uninterrupti ble Power Su pply CAUTION If the UPS is with metal chassis for safety purpose grounding is a must during UPS installation in order to reduce leakage current
5. e rear panel of the UPS Connect the other end of communication port cable to the port on the rear panel of the computer Download the software from http www power software download com viewpower html Follow on screen instruction to install the monitoring software Connect Modem Phone Network for Surge Protection Connect a single modem phone line into surge protected IN outlet on the back panel of the UPS unit Connect from OUT outlet to the computer with another phone line cable Power On Off UPS Press power switch on the front panel of the UPS to turn on UPS Press switch again to turn off the UPS Connection Chart seeeeseses Surge Protected Socket g Battery Backup Sockets Surge Protected Socket gt Oo Battery Backup Sockets 1000 650 850 AC mode LED green lighting Battery mode LED yellow lighting rien Fault LED red lighting AC Mode green lighting Battery Mode green flashing Troubleshooting Possible Cause Solutions No LED display on the Low battery Charge the UPS at least 6 hours type of battery on the UPS The UPS is overload Remove some loads first Before reconnecting equipment please verify that the load matches the UPS capability specified in the specs The UPS is overload Remove some critical load Battery voltage is too low Charge the UPS at least 6 hours Battery defect It might be due
Download Pdf Manuals
Related Search