Home
User Manual - Association of Public Health Laboratories
Contents
1. Click OK to accept your entries 6 On the Manage Assessments tab you will see the Assessment you just created along with the following details a Created this is the date you first created the assessment b Capability Areas CAs this lists all the CAs in the tool c Comments any notes you may have made during setting up the assessment d By username of the individual that created the assessment e Percent complete progress made to complete an assessment made across all domains of the tool f Four buttons that let you do the following i Assign Assign each CA to a domain li Details View the information you entered when you created the assessment iii Delete Delete an assessment if it is new and without data This option cannot be used to delete an assessment with data iv Status Change the default status from Pending to Active when a user is ready to proceed with entering data into the assessment SA Tool User Manual 8 4 Manage Assessments 4 2 4 2 1 Assign Domains Description Domains are the options available to laboratories for filling out the assessment Laboratories can choose to complete the assessment a as an organization by selecting the domain Lab Wide b Each laboratory unit completing its own assessment by selecting only one domain and c For multiple laboratory sections at the same time by selecting more than one domain e g both Newborn Screening and Environmental Testing The assessment will be c
2. 2 Move from one Capability Area CA to the next 5 2 1 Description e Only CAs that were assigned to the domain will be highlighted and therefore responses can be entered only for these CAs 5 2 2 Steps 1 Progress from one CA to the next can be done in two ways a When completing the CSs go to another CA at any time by clicking on Back to Domain Summary link on the top right of the screen This will take you to the Master List of CAs b After returning to the Master List of CAs you can select the next applicable CA We recommend proceeding sequentially from one CA to the next to maximize the benefit of the tool 5 3 Set Capability Area CA to be N A 5 3 1 Description e Only those CAs that have been assigned to domains can be marked as Not Applicable 5 3 2 Steps 1 Go to the Manage Assessment tab 2 Select the assessment of interest 3 Click on the Edit button to the right of the assessment name 4 On the next screen select the relevant domain oF CAs assigned to this domain are displayed and highlighted 6 To mark an entire CA as Not Applicable check the box in the column Mark as N A to the right of the CA name T A comment or reason for this designation is required 8 Click OK 9 You will return to the list of CAs 10 The CA that was marked as Not Applicable is no longer highlighted and has a check to the right of its name indicating that it is Not Applicable for that domain 11 The Progress scal
3. Yes No or Not Applicable A Yes response is assigned a score of 3 and a No response is assigned a score of 1 e For CSs with 3 levels Level 1 is assigned a score of 1 Level 2 a score of 2 and Level 3 a score of 3 e The maximum possible score for any one CS is 3 and the lowest possible score is 1 e The maximum possible score for a CA is 3 multiplied by the total number of CSs with 3 being the maximum score for any one CS e The scores are not weighted e lf a laboratory selects N A as the response for a CS the Statement is not assigned a score The maximum possible score for the CA is reduced by 3 points to account for the exclusion of the CS with a response of N A This is to prevent the laboratory domain from being penalized for a capability not being relevant A user must complete the entire assessment i e enter responses for all domains included in the assessment in order to fully understand their score for the respective CAs SA Tool User Manual 4 2 Organization of the Tool 2 2 Guidance Guidance is provided for each CA to help users have a more detailed understanding of the CA and corresponding CSs before completing the CA The guidance for a CA is only visible once the CA has been assigned to a domain Each guidance has the following sections e Background Information on the capability area e What The role the capability area plays in improving laboratory efficiency e How A description of the how a labora
4. been completed for that CA including Statements marked as Not Applicable 5 1 2 Steps 1 N oO a gt w A 10 11 12 From the Manage Assessments tab identify the assessment you wish to work on The status of the Assessment should be Active See earlier section on how to change status from Pending to Active Click on the Edit button to the right of the Assessment name and on the next screen select the relevant domain Click on the highlighted CA You will go to the first CS for that CA Select the maturity Level that most accurately captures your laboratory s current informatics capacity not planned or future scenarios In addition to selecting the appropriate maturity level for a CS the following are available to you Comments if there are specific aspects regarding the CS that you wish to take a note of please write them here Guidance You also have an option here to read the Guidance for help with completing the assessment Once you have made your level selection the Progress bar displayed at the lower part of your screen will indicate the number of CSs for which maturity levels have been selected and the number that still remain to be completed Click Next to go to the next sequential CS You can return to the Master list of CAs at any time by clicking on the Back to Domain Summary link on the top right section of the screen SA Tool User Manual 11 b Hlloutan Assessment 5
5. by a collaboration of PHL directors senior staff and informatics experts represents best practice benchmarks and standards The self assessment tool was created as a key part of the Laboratory Efficiencies Initiative LEI The Association of Public Health Laboratories APHL and the Center for Surveillance Epidemiology and Laboratory Services at the Centers for Disease Control and Prevention CDC cosponsor the LEI The goal of the LEI is to assure long term sustainability of the nation s PHL system by improving the efficiency of state local and territorial PHLs Additional information about the LEI is available from APHL at http www aphl org aphlorograms lss Laboratory Efficiencies Initiative Pages default aspx and CDC at http www cdc gov ophss csels od liu html The initial framework of the tool was based upon the Requirements for Public Health Laboratory Information Management Systems LIMS published by APHL in 2003 and the associated 16 business processes that provide the framework for a PHL s LIMS APHL 2003 Laboratories that are in the process of procuring LIMS can use the assessment tool as a guide to ensure the LIMS has all or at least the key capabilities they want At the same time laboratories that have implemented a LIMS can use the tool to measure LIMS capabilities and ensure that the LIMS is being used to improve laboratory efficiency While a laboratory may determine that it does possess a specific capability comp
6. User Manual for Informatics Self Assessment Tool for Public Health Laboratories LABORATORY EFFICIENCIES INITIATIVE Transforming to a Sustainable Public Health Laboratory System This publication was 100 funded with federal funds from a federal program of 3 093 643 This publication was supported by Cooperative Agreement UG6OHMOOO803 funded by the Centers for Disease Control and Prevention Its contents are solely the responsibility of the authors and do not necessarily represent the official views of CDC or the Department of Health and Human Services National Center for Immunization and Respiratory Diseases IP Office of Surveillance Epidemiology and Laboratory Services OSELS National Center for HIV Viral Hepatitis STDs and TB Prevention PS National Center for Zoonotic Vector borne and Enteric Diseases CK National Center for Environmental Health NCEH Coordinating Office for Terrorism Preparedness and Emergency Response CTPER Copyright 2015 Association of Public Health Laboratories All Rights Reserved Table of Contents 1 E O T E E A EEE cee amae eae 2 Ose rane ea TN acess E A E A E E E E A T E E 3 2 1 OA OW aeropo eer ien iE E AE EETA 3 2 2 ENE INC OE E E ensue oaks EA E ES EEEE A A EAE EA TEE T 5 2 0 NOS SAY ae ts case caren rotate niece oa se ree aes A ccna ss doe AE EA E coteeseneste 5 rO O E a E EN E ee eee EAEE 6 3 1 GLUP Edi Delete User ACCOUN wicisicaisiinneiniscarhaddnasnaqucntin
7. ber of CS answered and remaining can be determined by looking at the CS list as well as the progress bar at the bottom of the screen 6 Once the assessment is approved the View button from the Manage Assessments tab will display all assigned and completed CAs at 100 completion and score by domain 6 2 Determine Domains Assigned to Capability Area CA 6 2 1 Steps i Go to the Manage Assessments tab and locate the assessment Zz Click on the Assign button to the right of the CA name A list of all 19 CAs is displayed and each domain to which they a CA has been assigned is displayed as an abbreviation 3 A circle adjacent to the domain name indicates the extent of completion of the specific CA a CAs that have all responses completed for a domain and are approved have a circle lighter in color with an A in the center to indicate Approved b CAs completed for a domain but not approved have the circle that is a darker shade c CAs with no responses for a domain will have grey circles for the domain SA Tool User Manual 15 Complete and Publish an Assessment to APHL 7 1 Create Complete Submit and Publish an Assessment from an APHL Assessment Event Request 7 1 1 Description e New assessments that have been created under the Manage Assessment tab can be imported into an APHL event request Assessments can be in any status pending active complete and approved Once imported assessments can be published for su
8. bmission to APHL 7 1 2 Steps 1 To create an assessment from an APHL originated assessment event there are two options a Create a new assessment using the create button on the APHL event Refer to sections 4 and 5 for details on assigning domains and completing new assessments b Import an assessment from the manage assessment tab using the create button on an APHL event and selecting import data function 2 To import data from an existing assessment including assigned domains CAs and CS responses locate the APHL assessment template from the Manage Assessments tab and select the Create button 3 From the picklist displaying all private assessments completed by your laboratory select the desired assessment Click on Import data from previous assessment 4 The system will return to the Manage Assessments tab and the name of the APHL assessment will be altered to the name of your assessment with a 2 suffix The status is displayed as Pending 5 Click on the Status button and verify the Approval status of each assigned domain All data from the private assessment will now be available in the new assessment a To add domains to the assessment the assessment must be made Active by changing the status on the status dropdown for the overall assessment and un approve the domain you wish to modify Follow the steps outlined in section 4 2 2 to assign the domains b If any domains are not complete complete
9. browser window You can also find it in your Downloads folder 2 Print a Export the report first Then print from the exported file 3 Search a Users can search for text or numbers in the report by entering the value in the search box located to the left of Find b The text that matches the search item is highlighted 4 Page scrolling a The report is split over multiple pages to allow for easier viewing b Users can move from one page to the next by clicking on the arrows adjacent to the page number oe Refresh a This allows the user to refresh the screen 6 You can return to the main listing of report by clicking on Back to Report list SA Tool User Manual 17 3 Reports 8 3 Assessment Summary Report 8 3 1 Description e This report enables you to view the detailed responses to each assessment 8 3 2 Steps 1 Click on Assessment Summary Report e On the next screen select the Assessment you wish to view the report for using the name assigned when you set up the assessment In the adjacent box Select the domain for which you wish to view the report You can select multiple domains in this box if the assessment comprises multiple domains 2 Click on View Report 3 The Assessment Summary Report lists each CA all corresponding CSs and the Level that was selected by the responder For CAs that were not assigned to the domain selected for the report the Level is blank and does not include any data If m
10. ded on the status change Click OK On the Manage Assessments tab the status has now changed to Active and you can proceed with entering data into the assessment a Assessments in progress will display an Active status b Assessments that have all CAs filled out will display a Completed status c Assessments submitted to APHL will display a Published status SA Tool User Manual 10 5 Fill out an Assessment 9 1 5 1 1 Fill Out Capability Areas CA Description It is most meaningful if you complete the assessment following the sequence of CAs as they are arranged to mimic the progression of sample processing in a laboratory Only CAs that were assigned to the domain can be selected for entry The following columns are displayed to the right of the CAs Mark as N A Use this option to exclude an entire CA from your assessment if this capability does not apply to your laboratory Lab Wide Use this option if a specific CA is applicable to all domains Complete guidance This guidance that you can access by clicking on the hyperlink provides additional background and references for the CA CS count This lists the number of CSs that comprise the CA Current Score This lists the score for a specific CA within a domain based on the number of questions answered and the level selected The denominator represents the maximum possible score Progress This represents how much of the assessment has
11. e for this CA is also updated to 100 as all CSs within the CA now have a N A score SA Tool User Manual 12 5 Fill out an Assessment 5 4 5 4 1 5 4 2 Edit an Assessment Description Users can change the score assigned to a CS or remove N A that may have been assigned to a CA prior to publishing the assessment to APHL Steps From the Manage Assessments tab find the Assessment you wish to edit Click on the Edit button On the next screen select the relevant domain The Master List of CAs will be displayed and the assigned CA s are highlighted To edit an entry select the CA you wish to change by clicking on the name If the CA was assigned N A and you wish to now assign levels to CSs in this CA uncheck the Mark as N A box associated with the CA and the CA name will now be highlighted and can be selected for editing Next select the CS you wish to edit To change the level within a CS select the most appropriate level select next to save your change Your new entry will over write any previous entry If you wish to exit immediately after making one change click on Back to Domain Summary A pop up window will ask if you wish to save your changes Make the appropriate selection SA Tool User Manual 13 5 Fill out an Assessment 5 5 Approve an Assessment 5 5 1 Description e Only Assessments with a Complete status can be approved Those with Active or Pending status cannot be approved T
12. eas 15 Complete and Publish an Assessment to APHL ccccceeeceeseeeneeeneeenesenesenseeneceneceneeeeeceeesenenaaes 16 fal Create Complete Submit and Publish an Assessment from an APHL Assessment Event Request ccccecccsecseeeeeeeeeeaeeee seen eee eeeeeeeeeseeeaeeeeeeaeeseeeseueeaeeaessaneeaesganegas 16 PEDOT a E E E AA 17 8 1 PECO T RODO a E E A EE A E EAE E EAE 17 8 2 ER O EaU aea A A E 17 8 3 PSS SS eli SU IIA ROPOT sae senannsucec ninni EAEE EEA ETEEN E ANENE A EEEE 18 8 4 REDON A e peters ts Saeeaercetesint coe et option teeter tn ote oh tba no sestn saee eet aetna ene edna eesti ns gee ese 18 8 5 EOI WEN COON seseeecpaececcnn ere hoecedeece E E E AEE 19 6 6 Assessment emplate Report sacdangiianaaageevsvaenaraiatventeransany cise aeiensged ava rrt rrt rr se sateinore diene sememsieeninas 19 8 7 Individual Assessment Report ss ssnesnssnsrrsrerrerrsrrsrrrrrrrnrrrrrrrrrrt rrtt rrr trr Prr SrErrErEEEESEEOEEPEEEESErS EErEE rrene 20 SA Tool User Manual 1 1 Introduction The purpose of this self assessment tool is to enable Public Health Laboratories PHLs to have a comprehensive understanding and assessment of their current informatics capabilities The limited funding available for PHL informatics has focused on program specific applications not on a laboratory s cross cutting informatics system This is the first initiative that has sought to measure overall informatics capabilities in PHLs This tool guided
13. ected Select one CA and corresponding CSs Select Begin and End dates for the Time Period Click View Report Assessment Template Report Description This report allows you to view and print the entire assessment including the Levels available for scoring each CS within a CA Steps Click on the Empty Statements Report link from the Reports screen On the next screen select the assessment you are interested in Click on View Report The Assessment Template Report displays all CAs corresponding CSs and all available levels for each CS Scores are not displayed SA Tool User Manual 19 S Reports 8 7 8 7 1 8 7 2 Individual Assessment Report Description This report enables you to view specific scores for selected CAs and domains For example you can opt to view all CSs for CA 2 where your Newborn Screening laboratory scored a Level 2 Steps Click on Individual Assessment Report from the Reports screen On the next screen select the assessment you wish to view the report for using the name assigned when you set up the assessment Select one or multiple domains Select one or more CAs multiple CAs need to be selected one at a time Select a response score from Level 1 2 3 and N A To include multiple score in the report you need to select these from the list one at a time Click View Report The Individual Assessment Report displays the Title of the Report the title of the CA selected for the Report a table that includes c
14. following areas select from picklist Required Field f LIMS Software in use select from picklist Required Field g Type of Laboratory Organization select from picklist Required Field h Total cost for LIMS acquisition implementation and maintenance select from picklist Please click Save to ensure your responses are saved in the tool SA Tool User Manual 7 4 Manage Assessments 4 1 Create New Assessment 4 1 1 Description e Users designated as administrators of the tool can set up new assessments New assessments that are not created through an APHL assessment event request are private New assessment information can be imported into an APHL event request refer to section 7 for more information on completing an APHL assessment event 4 1 2 Steps 1 Log into the SA tool Assessments created in the past will be displayed on the Manage Assessments tab 2 To create a new assessment all required fields in the Laboratory Demographic section must be completed 3 Click New to create a new assessment or Duplicate to copy on that you have already created NOTE Clicking on Duplicate will not copy your responses only the questions to be included in the assessment 4 Clicking New will display a pop up box with the following fields a Event Name required entry you can give each assessment any name you choose b Assessment Template select one from the picklist c Comments any notes you want to record 5
15. he status of the entire assessment automatically changes to Complete from Active when every assigned domain is completed e Approvals are done by domain Therefore if an assessment comprises multiple domains each domain need to be individually approved e Once an assessment is approved no changes can be made till the Admin user un approves it Individual domains can only be un approved prior to the entire assessment being approved 5 5 2 Steps 1 Go to the Manage Assessments tab 2 Locate the Assessment to be approved and click on the Status button 3 The pop up window displays the number of CAs completed by Domain and the Progress is indicated as 100 Status is indicated as Complete A button labeled Approve is displayed NOTE If the progress is not 100 status for the domain will not be complete and the approve button will not be visible 4 To approve each domain click on the Approve button and the Status changes to Approved for the domain If multiple domains were included in the assessment a separate Approve button will be visible for each domain and this step needs to be repeated oO When you return to the Manage Assessments tab the status remains as Complete for the assessment NOTE If multiple domains were assigned and all are not completely entered the status on the Manage Assessments tab will display as Active and not Completed 6 To approve the entire assessment click on the Status b
16. iandeateoagedanndtndeystelaseectuwiudaianeaniennedennne iene 6 3 2 Bet Up Lagoratory DCO Gla OMICS miisecsanneatcstsanstacectianaicd daaganereibedncutcuedaaittenausieniseasa tana nan taastanataain 7 Manage PA Nl eh ccscrecedpin atten sie diate enasatanaatiedeenelnedeavanecaueiadcoverekcacbulaveserdedumersoiiastreciniuamseencesennces 8 4 1 Create New Assessment cccccccseeecceeeceeeeeeee eee eeeeeeeeeeeeeee se eeesSEeA HEEE AA ESSA ESSA ESSA EECA A EEEGAEEEEA SESSA a EEEE EEEn 8 4 2 ASON EON N arene Te eerT ere ner ere E en eee ere ere eee eee ae 9 4 3 Change Status from Pending to Active Required for Completing ASSESSMENL cccceeeeseeeeeeeeees 10 FE ai ey a NN cc ti a teaser atten epee tapered eae eas EATA 11 5 1 VO SO aS CA creena T N EEA 11 5 2 Move from one Capability Area CA to the NeXt 0 cccccccccesesseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeteeetaeeeseeetaeetaeeeas 12 5 3 Set Capability Area CA to be N A ivswidsirccereteisnadietarnaanedsmiiananteniarresainenniidetivaniiobiaenistenkinneeinarne 12 5 4 GN ASen IG eserse aE EAE Sn EE eset ateeuentemseser toate TEE 13 5 5 Approve an ASSESSMENT asunder cccamenertt cianncisedaccunt i e aiar a aeria ETETE 14 View Progress on an Assessment ss snssnunnssnurnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnmnnn nnne 15 6 1 Perre ae a a E A 16 6 2 Determine Domains Assigned to Capability Area CA 0 cccccecccseeeeeeeeeeeeeeeeeeeeeeeeesetaeetaeeeeeeerseetaee
17. l business domain Level 2 Minimal required technology and process in place to execute the functions described Level 1 No very little current ability to execute the functions described N A Not applicable to this laboratory To obtain the greatest benefit from the tool users should rank their laboratory s capabilities based on the capabilities that are currently present and in use in the laboratory Responses based on a laboratory s potential will not provide laboratories with the granularity they need to assess their true maturity level and subsequently progress from one level to the next As the user enters a response to a CS the tool automatically calculates the laboratory s grade and percent completed for the related CAs Note that there is no overall grade or score for all the 19 CAs It is also important to remember that the numeric score is not indicative of a Pass or Fail determination The tool allows for flexibility in whether a user completes it from the perspective of a specific LIMS implemented in one section of the laboratory or from the aspect of the overall capability of the laboratory and the services it is able to provide This flexibility enables a user to target systems or services and even specific sections within the laboratory e Each CS can be graded using either 2 or 3 levels that may be applicable to a laboratory s informatics capacity e For CSs with 2 levels responses are in the form of
18. leting the assessment can help it recognize flaws in current processes and thereby provide a roadmap for re implementing these capabilities with greater efficiency PHLs can use assessment results to prioritize upgrades to their existing capabilities Prioritization can highlight important gaps in a laboratory s request for allocation of resources Assessment findings can also be used to develop and inform policies within the laboratory as well as with external partners Laboratories may repeat the assessment at intervals to identify trends in capabilities SA Tool User Manual 2 2 Organization of the Tool The tool is organized into 19 Capability Areas CAs see Table 1 Collectively the CAs represent the principal laboratory functions that an information system supports The CAs closely track the 16 business processes identified by APHL s 2003 report In addition the SME group added three CAs to reflect functions related to data exchange and interoperability core Information Technology IT services and policies and procedures Table 1 19 Capability Areas CA 1 Laboratory Test Request and Sample receiving CA 2 Test Preparation LIMS Processing Test Results Recording and Verification CA 3 Report Preparation and Distribution CA 4 Laboratory Test Scheduling CA 5 Prescheduled Testing CA 6 Specimen and Sample Tracking Chain of Custody CA 7 Media Reagents Controls Manufacturing and Inventory CA 8 Intero
19. olumns for CSs Response Title which lists the Level selected during assessment completion Criteria which explains the meaning of the selected level for that CS Response Score which is a numeric interpretation of the selected Level and Response Notes that lists any comments made during assessment completion The report displays a blank page if the responses were recorded for the selected CA or the selected Level was not used for scoring any CS in the CA of interest SA Tool User Manual 20
20. omplete after all selected domains include responses 4 2 2 Steps 1 2 Click Assign to select the assessment to be worked on from the Manage Assessment tab All 19 CAs and their assigned domains will appear on the Assign Domains screen NOTE The Assigned to column will appear blank for a new assessment as no domains are assigned yet a The Change button on the same screen allows you to Assign Modify domains Click on the Change button for the Capability Area of your choice and the following domain options are available Select All Lab Wide Clinical Testing Environmental Testing Newborn Screening Pathology Surveillance EQA support as needed Select the appropriate domain s for the CA i Select Lab Wide from the domain list for an assessment of your entire organization li Selecting All will assign all domains to the CA and a separate assessment will need to be completed for each domain To assign the same domain s to all CAs a On the Assign Domains screen check the box to the left of Title which selects all CAs b Click on the Change Multiple Assessments button visible above Title and c Select the domains in the pop up box and click OK All CAs will now have the domains you selected and assigned To assign the same domain s to some but not all CAs a Check the box to the left of each CA b Click on Change Multiple Assessments button about Title and c Select the domain s in the p
21. op up box and click ok All CAs that had been selected will now have the domains you assigned To modify a domain assigned to a CA a Check the box to the left of the CA b Click Change and uncheck domains to be excluded NOTE Once an assessment is partially or fully complete domains already included in the assessment cannot be excluded using the above option CAs without assigned domains will be visible but not fillable in your assessment IMPORTANT A new assessment will remain in Pending Status until you use the status button to Assign Active status to your assessment on the Manage Assessments tab see 4 3 for details Once complete you will see the Edit button that enables you to begin filling out the assessment SA Tool User Manual 9 4 Manage Assessments 4 3 4 3 1 4 3 2 Change Status from Pending to Active Required for Completing Assessment Description All newly created assessments have a default status of Pending This status must be changed to Active before responses can be entered in the assessment Only Laboratory Administrator can perform this function Steps On the Manage Assessments tab locate the assessment you wish to work on To the right of the Assessment name the status is displayed as Pending To change the status click on the button labeled Status In the pop up box select Active from the Assessment status dropdown menu You can enter comments if nee
22. perability and Data Exchange OE ae Statistical Analysis and Surveillance CA 10 Billing for Laboratory Services CA 11 Contract and Grant Management CA 12 Training Education and Resource Management CA 13 Laboratory Certifications Licensing CA 14 Customer Relationship Management CA 15 Quality Control QC and Quality Assurance QA Management OE Mle Laboratory Safety and Accident Investigation CA 17 Laboratory Mutual Assistance Disaster Recovery CA 18 Core IT Services Hardware Software and Services CA 19 Policies and Procedures including Budgeting and Funding SA Tool User Manual 3 2 Organization of the Tool Each CA includes e Atitle e A brief description e One or more capability statements CSs The CS represents the capability of a laboratory that has reached full maturity The associated indicator statements describe laboratories at various stages of maturity see Table 2 CSs with three stages of maturity are graded from 1 to 3 points with 3 representing the highest level of maturity CSs requiring a Yes or No response assign a score of 1 for No and 3 for Yes Laboratories can use these levels as milestones to measure current status and progress towards full maturity Users can also select Not Applicable N A if a particular CS is not relevant Table 2 Levels of Maturity eee Technology and process in place extended to execute the functions described beyond the loca
23. ser record to be edited from Manage Users tab and click Delete You will be asked to confirm that you want to delete the user before you can proceed Laboratory Laboratory Laboratory Laboratory Administrator Reviewer Approver Responder Create new assessment ee en Duplicate assessment An o o o Assign assessment se en SA Tool User Manual 6 3 3 2 3 2 1 3 2 2 Introductory Steps Set Up Laboratory Demographics Description Only users with administrative rights can set up Laboratory demographics This section has required fields indicated by asterisks that must be entered in order to complete the assessment Steps Log into SA tool as Admin laboratory User Click on the Laboratory tab Fill out the boxes on the Laboratory tab that includes address information which are Laboratory Name Address 1 Address 2 City and State Zip code These are all required fields On the same tab you will see questions specific to your informatics and IT capacity and budget There are a few required fields indicated by a red asterisk that will be useful for comparison particularly when comparing your laboratory against national level data a Number of FTEs in your organization select range from a picklist b Number of IT Informatics staff in your organization select a range from a picklist c CDC funding source from the previous year select all that apply d Total Annual Budget select range from a picklist e Testing performed in the
24. them as outlined in section 5 of this manual c If any domains are not approved approve the domains as outlined in section 5 of this manual d Once all domains are approved click the status button and use the status dropdown to approve the entire assessment 6 For newly created and imported assessments an Approved status is required to submit to APHL T To carry out the final submission process to APHL select the Status button and from the corresponding pop up box select Publish from the Assessment status dropdown 8 When you return to the Manage Assessments tab now the status is listed as Published SA Tool User Manual 16 3 Reports 8 1 Access Reports To work on reports click on the Report button on the Manage Assessment tab You will see a screen that lists 5 types of reports 1 Assessment Summary Report 2 Report Card 3 Longitudinal Reports 4 Assessment Template Report 5 Individual Assessment Report 8 2 Standard Report Features All reports have the following features 1 Export a The report can be exported by clicking on the floppy disk icon on the ribbon at the top visible after completion of steps to set up the report as listed in the following report sections This will also display the various formats available for export b The application creates a download file following the format selected Based on your browser settings this file may be displayed in the lower section of your
25. tory that has this capability can improve its efficiency 2 3 Glossary The glossary provides an explanation for key terms terminology used throughout the tool These terms are sorted alphabetically The glossary is available at any time while logged into the tool and is not dependent on CA or domain SA Tool User Manual 5 3 Introductory Steps 3 1 Set Up Edit Delete User Account 3 1 1 Description e Laboratory directors will be designated as administrators of the tool will receive login information from APHL Administrators can set up new users and additional administrators under the Manage Users tab which you see upon initial login 3 1 2 Steps 1 Log into SA tool as Admin Laboratory user 2 Click on the Manage Users tab 3 Click on button labeled Add a In the save user box fill out details for the new user Users can only proceed after entering information for the required fields a Username b First Name c Last Name d Email Address e Roles Select the Role s from the dropdown box that appears when you click in the field The roles are described in Table 3 below b Click OK and a green pop up box in the top right area of your screen will indicate that the information was successfully saved c To edit a user that has already been created select the user record to be edited from the Manage Users tab and click Edit Click OK to ensure changes are saved 4 To delete a user that has been created select the u
26. ultiple domains are selected when generating the report each domain will have a column in the report for displaying the results of the Levels selected in the assessment 8 4 Report Card 8 4 1 Description e This report enables you to compare the results of your laboratory against the average score from other laboratories that have submitted their score to APHL 8 4 2 Steps 1 Click on Report Card Report from the Reports screen 2 On the next screen select the assessment you wish to view the report for using the name assigned when you set up the assessment Select a domain multiple domains cannot be selected 3 Click View Report The Report Card displays the CAs and corresponding CSs for which responses were provided with corresponding scores a column with National Average score for each CS based on data reported by other laboratories to APHL SA Tool User Manual 18 S Reports 8 5 8 5 1 8 5 2 8 6 8 6 1 8 6 2 Longitudinal Report Description This report enables you to view responses for a specific domain over time for all assessments An assessment is not specified to run this report instead a duration of time is required for which you are interested in viewing data for the specified domain so you can see changes in the scores for each CA and CS Steps Click on the Longitudinal Report link from the Reports screen On the next screen select a domain for which you wish to see results multiple domains cannot be sel
27. utton from the Manage Assessments tab and from the Assessment Status drop down box select Approved When you return to the Manage Assessments tab the status of the entire assessment is now displayed as Approved 1 Once an entire assessment has been Approved the only way to un approve it is by clicking on Status and changing Assessment status to Active On the Manage Assessments tab the status of the entire assessment will change to Completed SA Tool User Manual 14 6 View Progress on an Assessment 6 1 Determine Completion Status 6 1 1 Steps 1 There are multiple ways to determine if the assessment for a specific domain is complete from the Manage Assessments tab locate the assessment of your interest 2 The extent to which the entire assessment has been completed is displayed as a percentage under percent complete 3 To determine completion of an assessment at the individual domain level click on the Status button This will display the completion level for each domain as a percentage 4 To determine completion of an assessment at the CA level select the Edit button from the Manage Assessments tab You will be taken to a list all CAs for the associated domain and the progress for each are displayed as a scale and percentage 5 During the process of entering responses the bar displayed below the title of the CA has the updated status of that CA including percent complete and current score The num
Download Pdf Manuals
Related Search
Related Contents
p522 application manual.p65 Samsung B2030N User Manual NCV885300 Evaluation Board User`s Manual Mode d`emploi de la mise à jour du Rimsa PentaLED 12 User Manual & Installation Guide Krell Industries KAV-250a User's Manual MANUAL DE INSTRUCCIONES Not for Reproduction - Electric Generators Direct IFU GUSTO ES 461965277181.indd Copyright © All rights reserved.
Failed to retrieve file