Home

User Manual

1. button Title List DVD Auto Chapter 5Min 2 Press the A V buttons to select On then press the ENTER button Timer SH Press the EXIT button to exit the menu Edit VCR Function You can operate EZ Record by using EZ MODE button on Dubbing enden es the remote control setting Language Follow On 3 Insert a disc If the disc is a new DVD RW it is initialized to V mode Move s automatically 4 Press the REC 0 button 5 EZ Record function will automatically finalize the disc under the following conditions When you press the OPEN CLOSE button on your DVD ee Recorder amp VOR after recording on at least 30 of the disc The tray will open after the disc has been finalized Sm gena e The above feature is available only when a DVD RW V R V R disc is inserted Using setup menu Using EZ REC MODE button on the remote control 2 fyou select off you must finalize the disc manually in the Disc Setting menu see page 78 The length of Recording is different according to recording mode see page 58 When the EZ Record is set to On a DVD RW disc will be formatted to V mode automatically even if you select the VR mode in the Format DVD RW option Anynet HDMI CEC Anynet is a function that can be used to operate the recorder using a Samsung TV remote control by connecting the DVD Recorder amp VOR to a SAMSUNG TV using an HDMI Cable see page 21 This is
2. The disc is PAL format and cannot be played on this unit TV system The disc can be neither played nor recorded The disc cannot be played Please check the e Make sure there are no scratches or dirt on the disc disc If the disc has invalid information no more titles can be recorded Please format the disc beforehand e You can t use the disc because it contains errors from previous recordings Use the disc after formatting English 83 reference eee PROBLEMS AND SOLUTIONS DISPLAY ERROR MESSAGE PROBLEM EXPLANATION SOLUTION e You can t use the disc because it contains errors from previous recordings Error is detected on the disc Use the disc after formatting e When operating errors happen Turn off the device System error is found To turn off press and hold the power button on the front of the device for 10 Please try it again after turning off the power seconds After turning off press the Open button and remove the disc from the device e Make sure the DV device is connected properly to the DV connection Jack The DV device is not connected If it is connected properly turn it off and on once again If you are unable to solve the problem after reading the above instructions note e The model and serial number on the rear of your DVD Recorder amp VCR e The warranty information e A clear description of the problem Then contact SAMSUNG customer service at 1 800 SAMSUNG 84 reference
3. oection deletion starting point window and time Start 00 00 02 3 Playti me eS i i i E Tite No 2 Section deletion end point window and time Jan 01 2008 02 15 AM End 00 00 00 08 mem re 4 e Select the start and end points of the section you want to delete using the playback related buttons e Playback related buttons 2 QU g C 72_ editing 14 The length of the section to be deleted must be at least 5 seconds long End point cannot be marked earlier than start point The section cannot be deleted when it includes a still picture Dividing a title into two Divide Title Follow these instructions to divide a title into two DVD RAM DVD RW Q DVD RW 1 Press the TITLE LIST button The Title List screen is displayed 2 Press the A V buttons to select a title you want to divide from the Title List then press the ENTER button 3 Press the A Y buttons to select Divide Title then press the ENTER 4 d button E E3 00 00 02 The setting the dividing point screen is displayed e Point IS selected Move Enter 4 Press the ENTER button at the point where you want to divide the title Divide is selected Divide Title Original SSS eee b Press the ENTER button You will be prompted with a confirmation message The Message Do you want to divide title No 01 is displayed To reset the dividing point select
4. CONNECTING THE VIDEO OUTPUT Besides HDMI there are several other ways to connect your DVD Recorder amp VCR oelect one of the video connections on the following pages Connecting to Component Video Input Jacks Y Ps Pn Connect Component video cables not supplied between the COMPONENT OUT Y Ps jacks on the DVD Recorder amp VOR and COMPONENT IN Y Ps Pr jacks on your TV COMPONENT AUDIO OUT ViDEO our Audio Out for Component video Audio Video Cable Component Cable not supplied dN ONILLAS 8 9NILO3NNOO ANALOG AUDIO i W Green Blue e You will enjoy high quality images Component video separates the picture element into black and white Y blue Ps red Pr signals to present clear and clean images e Connect the audio cables white and red between the Component AUDIO OUT jacks on the DVD Recorder amp VCR and Component AUDIO IN jacks on your TV or AV amplifier See pages 24 25 e Progressive scan If your TV supports Progressive Scan you can enjoy higher quality video by Progressive Scan Setting The component cable has to be connected 2 Compared to standard interlaced video progressive scan doubles the amount of video lines fed to your TV resulting in a clearer more stable and flicker free image than interlaced video The component output jack of the DVD player can be used for progressive output mode which is only available with TVs that sup
5. HDMI enables you to make a digital video and audio connection with a single cable Using HDMI the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack Using an HDMI HDMI cable not included connect the HDMI OUT jack on the rear of the DVD Recorder amp VCR to the HDMI IN jack of your TV Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder amp VCR appears on your TV screen dN ONILLAS 8 9NILO3NNOO HDMI IN hear audio on your TV when using HDMI set the digital audio output to PCM 2 channel See page 33 Depending on the HDMI device TV HDMI Receiver you use audio may not be supported If your TV does not support Dolby digital DTS Audio output is not available when you set the Digital output as Bitstream or select DTS On in the Audio setup menu In this case set the digital audio output to PCM or DTS Off fyou use an HDMI cable to connect a Samsung TV to the DVD recorder amp VCR you can operate the recorder using the TV remote control This is only available with SAMSUNG TVs that support Anynet HDMI CEC See page 36 37 HDMI High Definition Multimedia Interface HDMI enables you to make a digital video and audio connection with a single cable Using HDMI the DVD and VCR player transmits a digitial video and audio signal and displays a vivid picture on a TV having an HDMI input ja
6. O 3 VIDEO OUT JACK AV OUT 6 DIGITAL AUDIO OUT JACK COAXIAL 9 SET TOP BOX CONTROL connecting amp setting up CONNECTING A SET TOP CABLE BOX OR SATELLITE RECEIVER TO DVD RECORDER amp VCR TV Set top Cable box or satellite receiver DVD Recorder amp VCR With the connection below you can watch and record your desired channel on the Set top Cable box or satellite receiver The DVD VR375 does not have a TV Tuner so you must connect a Set top Cable Box or Satellite receiver to watch or record TV through DVD Recorder amp VCR You can record channels by selecting the channel on the Set top Cable box or satellite receiver You cannot record one channel while watching another channel Be sure that the Set top Cable box or satellite receiver is turned on Place the Cable box controller IR Blaster near the remote sensor on the Set top Cable box or satellite receiver Set top box controller Set top Cable box IR Blaster or satellite receiver dN ONILLAS 8 9NLLO3NNOO RF cable VIDEO not supplied OUT IR Blaster Cable Audio video supplied cable supplied DVD Recorder amp VCR n E 1 Y v Yellow Red Connecting the IR Blaster cable into the Set top Cable Box Control jack 1 Find and Connect the included IR Blaster cable into the Set top Cable Box Control jack of the DVD Recorder amp VOR
7. e f the scene changes from dark to bright suddenly the screen may jitter temporarily but it is not defective Desired sound language and subtitle oound languages and subtitle languages are disc specific language are not played Only the sound and subtitle languages contained on a DVD disc are available and displayed on the disc menu No progressive output e Check whether you selected the corrent Progessive options in the Video Options The remote control doesn t work e Point the remote control at the remote control sensor on your DVD Recorder amp VCR Operate within distance 150 Remove obstacles between your DVD Recorder amp VCR and remote control e Check whether the batteries are depleted Other problems e Read the table of contents and then find and read the sections describing your problem and follow the directions given e Turn the unit off and on e f your problem still persists contact your nearest Samsung customer service No HDMI output e Check that the Video output is HDMI enabled e Check the connection between the TV and the HDMI jack of the DVD Recorder amp VCR e See if your TV supports this 480p 720p 1 080i 1080p DVD Recorder amp VCR Abnormal HDMI output screen e f snow noise appears on the screen it means that the TV does not support HDCP High bandwidth Digital Content Protection HDMI output Jitter e Check if your TV system is setup correctly e Screen Jitter may occur when the frame rate i
8. e DVD ROM PD MV Disc Divx Video Disc etc e Video CD CVD SVCD CD ROM CDV CD G CD 34 This DVD Recorder amp VCR can only operate with discs that are compatible with DVD RAM Standard Version 2 0 Playback and or recording may not work for some types of discs or when specific operations such as angle change and aspect ratio adjustment are being performed Information about the disc is written in detail on the box Please refer to this if necessary Do not allow the disc to become dirty or scratched Fingerprints dirt dust scratches and deposits of cigarette smoke on the recording surface may make it impossible to use the disc for recording DVD RAM xRW R discs may not be able to play on some DVD players depending on the player disc and the condition of the recording Discs with PAL programs recorded on them cannot be played using this product PLAYING A DISC 1 Press the OPEN CLOSE button 2 Place a disc gently into the tray with the disc s label facing up 3 Press OPEN CLOSE button to close the disc tray e Your DVD Recorder amp VOR closes the disc tray and plays the disc automatically e he recorder does not play discs automatically after initially being powered on e When the recorder is powered on and a disc is in the tray the unit will be activated and wait in stop mode Press the PLAY button to start playback e Power on the unit with the PLAY button if you wish to automatically play a disc in the re
9. 0242 0028 0334 0211 0029 0259 0307 0652 0018 0069 0649 0255 0305 0032 0111 0317 0144 0023 0533 1877 0877 0260 0008 0277 0477 0400 0770 0012 0013 0059 0786 0000 0040 0000 0144 0020 0040 0883 0015 0315 0303 0797 0255 1247 0021 0060 0797 0047 1256 0843 0207 0153 0153 0400 0259 0020 0273 0279 0276 0002 0020 0682 0070 0153 0040 0022 0011 0304 0479 0000 0040 0144 0023 0003 0070 0000 1898 1737 0008 0277 0017 0006 0237 0025 0477 0207 0877 0003 0012 0000 0021 1877 0510 0510 1265 0246 0019 0040 0015 0011 0035 0011 0112 1091 0040 Set top Cable box brand Sony Spectradyne Spectravision Sprucer Standard Components Starcom Stargate Starquest StarSight Stealth Stellar One Storm Suena Madritel Supercable Supermax Sylvania Tandy Tatung Teac Technics Teknika Teleavia TeleCaption Teleview Texscan 1156 Thomson Timeless Tocom Torx Toshiba Trans PX Trinity Tristar TS Tusa TV COMM TV Guide TV86 Uniden Unika United Artists United Cable Universal US Electronics V2 Verizon Video way Video Works Vidtech Viewmaster Viewstar Vision Visionetics Vortex View WaveMaster Wiso Zenith Zenitek Code number 1006 1506 1606 0769 0058 0058 0021 0307 0010 0144 0203 0096 0155 0003 0015 0047 0014 0098 0305 0015 0040 0770 0865 0797 0305 0014 0015 0542 0422 0274 0807 1018 0637 1230 02
10. 1200 e his is the standard NTSC reference black level for wem consistent brightness contrast across all sources mer Resolution HDMI Auto Select this when you want to make the screen darker Se FEIN mn e This will enhance the black level for increased brightness ME _ A i Po D Progressive contrast when viewing DVDs Select this when you want to Setting make the screen lighter Move Enter Return Picture Control Selects the picture control for the video signals output from the AV output jacks You can adjust the DVD video signal from the recorder to obtain the picture quality you want Select the setting that best suits the program you are watching e This function can only be used when you have the Video No Disc OUt AV out jacks connected and does not work with Title List TV Type 4 3 Letter Box Resolution HDMI Auto Component and HDMI _ s e Dynamic 1 Produces a bold dynamic picture by increasing Emm the picture contrast and the color Dubbing t V standar T Di e Dynamic 2 Produces a more dynamic picture than Dynamic Setting 1 by further increasing the picture contrast and the color e Standard Displays a standard picture function turned off Move Enter AReturn e Cinema 1 White colors become brighter and black colors become richer and the color contrast is increased e Cinema 2 Enhances detail in dark areas by inc
11. The clock Setup Clock Set must be set before proceeding with a timer recording See page 30 elele ele DVD RAM DVD RW DVD R Uy DVD R 1 Press the OPEN CLOSE button and place a recordable disc on the disc tray or load a tape into the VCR purum 2 Press the OPEN CLOSE button to close the disc tray Wait until a Timer Wr Timer Timer List LOAD disappears from the front panel display 3 With the unit in Stop mode press the MENU putton Dubbing Disc 4 Press the A Y buttons to select Timer then press the ENTER 2 button EE Move Enter NReturn 5 Press the A V buttons to select Timer Standard then press the ENTER button You can go to the Timer recording screen directly by pressing the TIMER REC button The Timer Recording screen is displayed 6 Fill in the items using the A Y lt buttons b Moves to the previous next item A Y or 0 9 To set or change items in the Scheduled Record List Menu 62 recording e Media Select the media to record DVD or VCH NECI Timer Standard 12 00 AM e Date Date that the timer recording starts Sets the date using A button dme To record the same program every day or the same day a EA CO EE every week press Y button see below aa a at No 01 Adjust Move NReturn 1month later oat Mon Sun Mon Fri Mon Sat Sun Sat Today e Start End Time Start and end time of the timer recording
12. Use these instructions to format a disc Disable disc protection before formatting DVD RAM DVD RW H DVD RW 1 With the unit in Stop mode press the MENU button Disc Forma 2 Press the A V buttons to select Disc Setting then press the Disc Name ENTER button e 3 Press the A V buttons to select Disc Format then press the Select eo romat ENTER button DVD RW e You will be prompted with the confirmation message All of the GO data will be erased even protected titles Do you want to format this disc DVD RAM RW Disc Name e You will be prompted with the confirmation message Select the recording format When using a DVD RAM disc you can Select the recording format select VR mode only e You will be prompted with the confirmation message All of the data will be erased even protected titles Do you want to era format this disc G Enter Return e You will be prompted with the confirmation message Do you want to format disc 4 Press the lt P gt buttons to select OK then press the ENTER button The disc is formatted 2 You can change the disc mode only one time when the unused DVD R disc is inserted DVD VR and DVD V modes are compatible with the following disc types DVD V DVD RAM DVD RW DISC DVD RW BE DVD R English 77 Finalizing a Disc After you record titles onto a DVD RW DVD R disc with your DVD Recorder amp VOR it need
13. appendix 2 00 020 2222 SPECIFICATIONS Power requirements 120V AC 60Hz Power consumption 25 Watts S Weight 9 7 b Dimensions 16 9In W x 13 0In D x 3 1In H Operating temp 41 F to 95 F Other conditions Keep level when operating Operate in less than 75 humidity Video 1 0 V p p at 750 load sync negative Inout Max Audio Inout Level 2Vrms DV Input IEEE 1394 4p compatible jack Audio output jacks 1 2 Coaxial digital audio output support Audio Min 100 dB signal to noise ratio Max 0 005 total harmonic distortion T H D Output at average 1 KHz Video output jacks Video Component output Y 1 0Vp p Pb 0 70Vp p Pr 0 70Vp p at 75Q load HDMI output 480p 720p 10801 1080p Picture Compression format MPEG II Audio Compression format Dolby AC 3 256kbps HQ Approx 1 hour HSP Approx 1 hour 30 minutes SP Approx 2 Recording Quality hours LSP Approx 2 hours 30 minutes ESP Approx 3 hours DVD LP Approx 4 hours EP Approx 6 hours SLP Approx 8 hours Video S N Ratio Min 50dB at standard recording Audio S N Ratio Min 5dB Audio frequency characteristics 20 Hz 20 KHz Audio Output For DVD discs audio signals recorded at 96kHz sampling frequency are converted into and output at 48kHz Disc Type DVD AUDIO CD CD DA Analog Audio Output 48 96KHz 44 1KHz Digital Audio Output 48KHz 44 1KHz English 85 XIaN3ddv e SAMSUNG DVD RECORDER amp VCR LIMITED WARRANTY TO ORIGINAL
14. button Returns to the beginning of the current track e x when pressed during playback If pressed again your DVD de Recorder amp VCR moves to and plays the previous track If you press this button within three seconds after playback starts the previous track will be played If you press this button after three seconds the current track will be replayed from the beginning Press the 4 buttons Fast Play FF1 FR1 FF2 FR2 Audio CD only MOV8AV Id E Stops a track song P AY Selects a track song TITLE LIST PLAY LIST DISC MENU INFO EXIT TITLE MENU o 9 O0 gt gt I button Plays the next track II Pauses playback e Plays a track song ENTER button Plays the selected track song Playing an Audio CD CD DA 1 Insert an audio CD CD DA into the disc tray e The audio CD menu appears and the tracks songs are played automatically 2 Press the A V buttons to select the track song you want to hear and then press the ENTER button Audio CD CD DA Screen Elements Current track song Displays the number of the track currently being played This shows the operating state of a disc and a playback time corresponding to a portion that is currently played Surround Off TRACK01 CD Play 00 00 19 44 115 4 TRACK01 CD 03 52 TRACK01 CD 04 02 TRACK01 CD 03 51 TRACK01 CD 03 49 TRACK
15. 01 AV1 00 00 11 gt e Delete Deletes the character at the cursor position Em 00 00 09 03 Sports A1 00 00 30 e Clear Deletes all the character inputs 4 NEEDS FUNT e Finish Registers the character inputs ee 12 06 AM of LSP 5 Press the A V lt P buttons to select Finish and then press the Finish button Move Enter Return The changed title name is displayed in the title field of the selected title Locking Protecting a Title Follow these instructions to lock a title to protect it from accidental deletion DVD RAM DVD RW DVD R QM DVD R VR mode 1 Press the TITLE LIST button The Title List screen is displayed o Title List Original 12 00 2 Press the A V buttons to select a title you want to protect in the Title List then press the ENTER button 2 E seine 3 Press the A V buttons to select Protect then press the ENTER U button Jan 01 2008 12 06 AM of LSP 4 Press the lt gt buttons to select On then press the ENTER button The lock icon on the information window for the selected title changes to the locked status amp Move Enter HN Return Title List Original 12 00 AM No Title Length Edit 0 00 00 11 gt 02 AM 00 00 09 03 AV1 00 01 36 04 AV1 00 00 11 gt Jan 01 2008 12 06 AM LSP Move Enter Return 70_ editing Erasing a Title Title Erase Follow these instructions to d
16. 1 Press the ANYKEY button during playback 2 Press the A V buttons to select Subtitle then press the 4 m buttons to select the desired subtitle language 3 Press the ENTER button m anh s Remain 00 00 52 34 The subtitle display may be different depending on the disc type h I lf the subtitles overlap disable the caption function on your TV Some discs allow you to select the language for the disc menu only To make the sub menu disappear press the ANYKEY or RETURN button again CHANGING THE CAMERA ANGLE O DVD VIDEO If a DVD VIDEO contains multiple angles of a particular scene you can use the Angle function If the disc contains multiple angles the ANGLE appears on the screen 1 Press the ANYKEY button during playback 2 Press the A V buttons to select Angle then press the lt gt en buttons or number 0 9 buttons to select the desired angle ne Scene Time 00 00 52 Audio ENG Dolby D 2ch 1 1 3 Press the ENTER button Remain 00 00 52 Subtitle ENG pa DESC E d oz This function is disc dependent and may not work on all DVDs BUM This function does not work when a DVD has not been recorded with a multi camera angle system To make the sub menu disappear press the ANYKEY or RETURN button again 52 playback PLAYING BACK AN AUDIO CD CD DA MP3 Buttons on the Remote Control Used for Audio CD CD DA MP3 Playback SKIP PAUSE gt I
17. 187 7 203 891 7 209 423 7 210 067 7 228 062 7 245 566 7 245 567 7 257 065 7 263 045 7 269 110 7 212 086 7 272 106 7 280 460 7 283 729 7 286 454 7 304 938 GALYVLS ONILLAD e DANGER VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU ADVARSEL SYNLIG OG USYNLIG LASERSTR LING VED BNING UNDGA UDS TTELSE FOR STRALING VARO AVATTAESSA OLET ALTTIINA NAKYVAA JA NAKYMATON LASERSATEILYLLE ALA KATSO SATEESEEN VARNING SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD BETRAKTA EJ STRALEN ADVARSEL SYNLIG OG USYNLIG LASERSTRALING NAR DEKSEL PNES UNNG EKSPONERING FOR STR LEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GE FFNET NICHT DEM STRAHL AUSSETZEN AH BRA ER cc amp pi UL Y KENHKT E AX iBERI U filz U LAUNT lt EAUN PRECAUTION Important Safety Instructions Read these operating instructions carefully before using the unit Follow all the safety instructions listed below Keep these operating instructions handy for future reference 1 Head these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean
18. CABLE oelect one of the Audio connections on the following pages Connecting to your TV This connection will use your TV s speakers Yellow 24 connecting amp setting up Connecting to a Stereo Amplifier with Analog Input Jacks If your stereo amplifier only has AUDIO INPUT jacks L and use the AUDIO OUT AV OUT jacks dio Out for Component video e a e a e e e m a a 99 Audio Cable ANALOG AUDIO dN ONILLAS 8 9NILO3NNOO Connecting to an AV Amplifier with a Digital Input Jack If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack use this connection To enjoy Dolby Digital or DTS sound you will need to set up the audio settings See page 32 34 Coaxial Cable AV amplifier not supplied Rear R Front L Front R Subwoofer Center Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent 5 451 942 amp other U S and worldwide patents issued amp pending DTS and DIS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS Inc 1996 2007 DIS Inc All Rights Reserved English _25 sating UR CM CONNECTING EXTERNAL DEVICES This
19. DVD RAM DVD RW DVD R VR mode 1 Press the TITLE LIST button The Title List screen is displayed Chapter Erase Original 12 00 AM Title No 02 Chapter No 1 7 2 Press the A V buttons to select a title you want to erase from the 01 00 00 03 gt ad Title List then press the ENTER button 3 Press the A V buttons to select Chapter Erase then press the M PEWZI gt ENTER button e The Chapter Erase screen is displayed 04 000003 05 00001 06 0010004 4 Press the A V lt P buttons to select a chapter you want to erase Move G Enter Return from the Title List then press the ENTER button Check is selected Chapter Erase Original 12 00 AM To preview the chapter press the ENTER button Chapter No 1 1 Title No 02 When you press the RETURN button the display returns to Chapter Erase Original Do you want to erase No 01 5 Press the A V buttons to select Erase then press the ENTER button You will be prompted with a confirmation message The Message Do you want to erase No 01 is displayed 6 Press the lt gt buttons to select OK then press the ENTER button The selected chapter is erased from the title To erase other chapters repeat from step 4 Enter N Return English _71 34 You can also erase chapters from a Playlist title fyou erase an original title used in a Playlist that Playlist is also erased Erasing a section of a Title A B Erase Follow t
20. Disc Menu For the disc menu contained on the disc e Audio For the disc audio language e Subtitle For the disc subtitles 6 Press the A V buttons to select the desired language then press the ENTER button 34 fthe selected language is not recorded on the disc the original pre recorded language is selected English _37 system setup 00002 SETTING UP THE PARENTAL The Parental function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches There are up to 8 rating levels on a disc 1 With the unit in Stop mode press the MENU button No Disc Options 2 Press the A V buttons to select Setup then press the ENTER Title List Language e button STB Pass Through Off 3 Press the A V buttons to select Options the press the ENTER g TS button lt Factory Setting Disc 4 Press the A Y buttons to select Parental then press the ENTER button When you operate your DVD Recorder amp VCR for the first time dei eg the Create the password message will be displayed b Enter a 4 digit password using the number buttons on the remote control The Confirm the password message will be displayed Enter your password again 2 Press the RETURN button to return to the previous menu Press the EXIT button to exit the menu If you forgot your password 1 Remove the disc 2 Press and hold the CH V A
21. FF1 lt lt FR e You can scan the program in reverse order To return to normal speed playback press the gt button 34 You can hear sound during forward search FF1 in DVD VIDE0 DVD RAM RW R disc The speed marked in this function may be different from the actual playback speed English 49 Olayoack 0000000000000 Skipping Chapters or Tracks DVD VIDEO M DVD RAM IM DVD RW i DVD R CD DVD RW IM DVD R During playback press the 1 4 or gt gt I button on the remote control e f you press the 4 lt button If you press the 1 4 lt button it moves to the beginning of the chapter or track Pressing the button once again within 3 seconds returns to the beginning of the previous chapter or track f you press the gt gt button If you press the gt button it moves to the next chapter or track Skipping Ahead 30 Seconds DVD VIDEO R DVD RAM R DVD RW DVD RW DVD R During the playback press F ADV SKIP button to skip ahead exactly 30 seconds SLOW MOTION PLAY STEP MOTION PLAY Slow Motion Play DVD VIDEO DVD RAM i DVD RW DVD R UEM DVD R During Pause mode press the SEARCH lt lt or gt gt button on the remote control for more than 1 second e Each time you press the gt button r I gt Slow 3 gt I Slow 2 gt I Slow 1 7 e Each time you press the lt lt button lt l Slow 3 lt I Slow 2 4 Slow 1 To return to normal speed playback press
22. Gradiente 0856 Sony 0639 1639 Hitachi 0819 0749 Star Choice 0869 Houston Tracker 0775 Star Trak 0869 0772 HTS 0775 Thomson 0566 0392 Hughes Network Systems 0749 1749 1442 1142 Tivo 1142 1442 Humax 1176 1359 1048 0863 0283 Toshiba 0790 0749 1749 1285 Innova 0099 UEC 1333 1358 Jerrold 0361 0036 0627 Uniden 0724 0722 JVC 0775 1170 Video Cipher II Plus 0361 Magnavox 0722 0724 Zenith 0856 1856 McIntosh 0869 Memorex 0724 Connections Select the sub item AV1 or AV2 using the A Y buttons then press Mma KS ES the ENTER button Title List Brand Code 0000 If you connect your Set top Cable box or satellite receiver to the a vs is recorder s audio video input page 19 nn e AVI Select this when the Set top Cable box or satellite Dubbing receiver is connected to the DVD Recorder amp VCR s AV1 IN Setting jacks e AV2 Select this when the Set top Cable box or satellite Move G Enter AReturn receiver is connected to the DVD Recorder amp VCR s AV 2 IN jacks 34 m See the instruction supplied with your Set top Cable box or satellite receiver to confirm the box s antenna output channel he DVD VR375 does not have a TV tuner Recording TV broadcasts is possible via Connection to Set top Cable or Satellite receiver f using STB Pass Though connect the Set top Cable box or satellite receiver into the DVD Recorder amp VCR s AV1 IN jacks 44 system setup CH Digit Lock Select the sub item Off or Lock to two digit
23. PURCHASER This SAMSUNG brand product as supplied and distributed by Samsung Electronics America Inc SAMSUNG and delivered new in the original carton to the original consumer purchaser is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of One 1 Year Parts Ninety 90 days Labor 90 days Parts and Labor for Commercial Use This limited warranty begins on the original date of purchase and is valid only on products purchased and used in the United States To receive warranty service the purchaser must contact SAMSUNG for problem determination and service procedures Warranty service can only be performed by a SAMSUNG authorized service center The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG s authorized service center Transportation of the product to and from the service center is the responsibility of the purchaser SAMSUNG will repair or replace this product at our option and at no charge as stipulated herein with new or reconditioned parts or products if found to be defective during the limited warranty period specified above All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG Replacement parts and products assume the remaining original warranty or ninety 90 days whichever is longer SAMSUNG s obligations with respect to software products distributed by SAMSUNG under
24. SLP ong duration mode e The dual layer DVD Rs have approximately double the capacity of single layer DVD Rs See page 47 58 recording UNRECORDABLE VIDEO Pictures with copy protection cannot be recorded on this DVD Recorder amp VOR When the DVD Recorder amp VCR receives a copy guard signal while recording recording stops and the following message to the left appears on the screen You cannot record copy protected movie Concerning Copy Control Signals TV broadcasts that contain copy control signals may have one of the following three signal types Copy Free Copy Once and Copy Never If you want to record a copy once type program use a DVD RW with CPRM in VR Mode or DVD RAM discs O Supported Not Supported type Copy Free DVD RW Ver 1 1 DVD RW Ver 1 1 ONIdQdOO3H Copy Once Copy Never with CPRM VR mode 0 DVD R DVD RAM Ver 2 0 DVD RW Once Copy Once has been recorded additional recordings cannot be performed compatible with CPRM Content Protection for Recordable Media CPRM CPRM is a mechanism that ties a recording to the media on which it is recorded It is supported by some DVD Recorder amp VCRs but not by many DVD players Each blank recordable DVD has a unique 64 bit media ID etched in the BCA Burst Cutting Area When protected content is recorded onto the disc it can be encrypted with a 56 bit C2 Cryptomeria cipher
25. Show Speed screen will appear Press the lt b buttons to set the slide show speed then press the ENTER button 4 2 Press the ENTER button with a picture selected in the Album screen and select a display mode Album screen Slide show Rotation or Zoom using the lt gt buttons then press the ENTER button ER Returns to the Album screen EORR The unit enters slide show mode Det Enter Before the slide show begins the picture interval Slide show speed must be set Each time the ENTER button is pressed the picture rotates 90 degrees clockwise Enter NReturn Picture 1 10 B Slideshow Each time the ENTER button is pressed the picture is enlarged up to 4X Four times the normal size amp JPEGO01 JPG Move Enter Return Anykey 54_ playback e Press the ANYKEY button to display the menu bar e Press the ANYKEY button again to clear the menu bar 2 f select the Photo JPEG files will only be displayed lf there no JPEG files empty folder will only be displayed Music Photo Simultaneous Playback 1 Insert a Mixed disc Music JPEG into the disc tray l 7 2 Pressthe A V buttons to select MIX and then press the ENTER button v Surround The track list will be displayed lt y 3 Press the ENTER button 4 15 een The message Do you want to view the photo with MP3 will be displayed A 4 Press the lt gt but
26. V lt gt buttons to select Finish then press the ENTER button The changed title is displayed in the title field of the selected title Deleting a Playlist Title from the Playlist 1 Press the TITLE LIST button with the disc stopped then press the PLAY LIST button The Edit Playlist screen is displayed 2 Press the A V buttons to select the title you want to delete from the Playlist then press the ENTER button 3 Press the A V buttons to select Title Erase then press the Jan 01 2008 ENTER button 12 06 AM 4 Press the lt P gt buttons to select OK then press the ENTER Move G Enter button After the delete operation is complete it will automatically return to the Edit Playlist screen English 75 DISC SETTING Menu items may vary depending on the existence of a recorded title Editing the Disc Name Follow these instructions to give a name to a disc DVD RAM DVD RW 0 DVD RW DVD R 1 With the unit in Stop mode press the MENU button P om EB 2 Press the A V buttons to select Disc Setting then press the Disc ENTER button 4 3 Press the A V buttons to select Disc Name then press the mon ENTER JE The Disc Name screen is displayed Backspace Space Delete Clear Finish 4 Enter the desired characters using the A Y lt gt buttons e Backspace
27. after finalization but additional recording deleting and editing can not be performed after finalization e f you want to record the disc in VR Mode and then record in V Mode be sure to execute format Be careful when executing Format because all the recorded data may be lost You can change the disc mode only one times when the unused DVD R disc is inserted e DVD R RW VR mode You can record multiple titles edit delete partial delete create a playlist etc A disc that is recorded in this mode may not be played by existing DVD players e DVD R RW Video mode he disc can be played by an existing DVD player once it has been finalized If a disc that has been recorded in Video mode by a different manufacturer s recorder but has not been finalized it cannot be played or recorded by this recorder When programing is erased from a DVD R that space does not become available Once an area on a DVD R is recorded on that area is no longer available for recording whether the recording is erased or not DVD R Disc Playback and Recording e Once a DVD R is recorded and finalized it is playable in a standard DVD player e You can record onto the available space on the disc and perform editing functions such as giving titles to discs and programs and erasing programs before finalizing e When programing is erased from a DVD R that space does not become available Once an area on a DVD R is recorded on that area is no longer
28. allows you to connect your DVD Recorder amp VCR to other external devices and view or record their outputs Connecting a VCR Set top Cable box satellite receiver or DVD player to the AV 1 IN Jack Connecting a VCR or external device to AV 1 IN jacks of the DVD Recorder amp VCR You can record from connected equipment VCH Set top Cable box satellite receiver or DVD T R L a L aupio VIDEO WU W EC OUTPUT Yellow Red 2 You can also use the AV 2 IN jacks on the front panel of the DVD Recorder amp VCR Press the INPUT SEL button to select AV1 Copy protected content cannot be recorded Depending on your input connection you must choose AV 1 Composite See page 44 26 connecting amp setting up Connecting a Camcorder You can record from connected equipment such as a camcorder by using the AV2 IN or DV IN jacks on front of the DVD Recorder amp VCR SAMSUNG SAMSUNG RAM RW R FULL MULTI RECORDING F VIDEO AUDIO ain aeee Audio Video Cable DV Cable not supplied L R VIDEO Launo SNI LL3S 8 9NILO3NNOO OUTPUT 34 Check your camcorder s owner s manual to see how to use the camcorder in this mode English _27 system ON SCREEN MENU NAVIGATION The on screen menus allow you to enable or disable various functions on your DVD Recorder amp VCR Press the MENU button to ope
29. available for recording whether the recording is erased or not e t takes about 30 seconds for the unit to update the recorded information after recording finishes e his product optimizes the DVD R for each recording Optimizing is executed when you start recording after inserting the disc or turning on the unit Recording onto the disc may become impossible if optimizing is performed too many times e Playback may be impossible in some cases due to the condition of recording e This unit can play back DVD R discs recorded and finalized with a Samsung DVD video recorder It may not be able to play some DVD R discs depending on the disc and the condition of the recording 6 getting started DVD RW Disc Playback and Recording e With DVD RW discs there is no difference between DVD Video format Video mode and DVD Video Recording format VR mode e Finalizing is generally unnecessary when using a DVD RW disc DVD RAM Disc Playback and Recording e For cartridge type DVD RAM discs remove the cartridge and use only the disc e You cannot play a DVD RAM in most DVD players due to compatibility issues e Only DVD RAM standard Version 2 0 discs can be played in this unit e DVD RAM discs recorded on this unit may not work with other DVD Players To determine compatibility with these DVD RAM discs refer to the user s manual for the player COPY PROTECTION e Many DVD discs are encoded with copy protection Because of this you should onl
30. be selected See page 32 A variety of functions with an easy to use user interface The Integrated menu systems and messaging functionality allow you to perform the desired operations easily and conveniently With a DVD RAM DVD RW DVD R VR mode disc you can edit recorded images create playlist and edit videos in a specific sequence according to your needs HDMI High Definition Multimedia Interface HDMI reduces picture noise by allowing a pure digital video audio signal path from the DVD Recorder amp VOR to your TV HOME Tunerless DVD Recorder amp VCR The DVD VR375 does not have a TV tuner Recording TV broadcasts is possible via Connection to oet Top Cable Box Satellite and Multi Channel Video Services EZ REC MODE This function allows you Finalize a disc automatically See page 36 Simplay HD The DVD VR375 is SimplayHD verified A Simplay sp 10 getting started BEFORE READING THE USER S MANUAL Make sure to check the following terms before reading the user s manual Icons that will be used in manual Icon Definition DVD This involves a function available with DVD or DVD R V DVD RW V R discs DVD VIDEO that have been recorded and finalized RAM This involves a function available with DVD RAM discs Q m j j RW This involves a function available with DVD RW discs DVD RW dp a ms involves a function available with DVD R discs JJ j RW This involves a function av
31. button on the front panel for 10 seconds or more The tray opens and password reverts to the factory settings See the next page to create a new password Setting the Rating Level 1 Press the A V buttons to select Rating Level then press mmm EE ENTER button Title List RatingLevel La 2 Press the A Y buttons to select the Rating Level you want then Fr press the ENTER button Edit For example if you select up to 6 discs that contain 7 8 will pce play setting A larger number indicates that the program is intended for adult d ony v Move Enter Return 38_ system setup Changing the Password 1 Press the A V buttons to select Change Password then press 12 00 AM the ENTER button The Enter your password message will be x displayed Timer 2 Enter a new 4 digit password using the number buttons on the remote control The Confirm the password message will be Setting displayed 3 Enter your new password again using the number buttons on the Dubbing Move Enter Return remote control e STB Pass Through lt If you select STB Pass Through On you can watch the output that Ei 0 is connected through AV1 of the Set top Cable box or satellite receiver using all outputs when the Recorder is powered off Timer Parental S STB Pass Through 1 On Edit Front Display e On Allows audio video signal
32. button to select Disc Unfinalize then press the Do you want to unfinalize this disc ENTER You will be prompted with the message Do you want to unfinalize disc 4 Press the lt P buttons to select Unfinalize then press the ENTER button You will be prompted again with the message Disc will be unfinalized Do you want to continue 5 Press the lt P buttons to select OK then press the ENTER button The disc is unfinalized 78 editing Disc Information DVD RAM DVD RW DVD R DVD R DVD RW wD Disc Information 12 00 1 With the unit in Stop mode press the MENU button 2 Press the A Y buttons to select Disc Setting then press the ENTER button Disc Name Media DVD RAM Format VR Mode 3 Press the A Y buttons to select Disc Information then press le Protected Not Protected the ENTER button Date 1 03 2008 The Disc Information is displayed 0H59M 1H29M SP 2HOM Remainder LSP 2H29M ESP 2H59M LP 4H0M 6H14M SLP 8HOM 4 6 4 7GB Return J Exit ONILIGA e Erase All Titles DVD RAM pM DVD RW GIN VR mode 1 With the unit in Stop mode press the MENU button Am 2 Pressthe A V buttons to select Disc Setting then press the ENTER Title List Disc Name ui 7 3 Press the A V button to select Erase All Titles then press the ENTER Unfinalized button Dubbing Disc rese Ities e You will be prompted wi
33. is connected to equipment not Edit r compatible with Dolby Digital PCM will automatically be Dubbing Sean Audio PCN output even when Dolby Digital is selected rosa Input nm e PCM Converts all audio signals to Linear PCM AV Audio Stereo Move Enter Return English 33 Scan Audio DVDs only e On Outputs audio signals during FF1 fast forward of a DVD disc with Dolby Digital soundtracks e Off Turns off the function No sound is output during FF1 fast forward m Sound will be interrupted during Scan Audio fthe audio format is LPCM this function is not supported Surround No Disc Audio Title List Timer Edit Dubbing Disc Setting Move 12 00 Digital Out Downmix Audio DRC Audio HDMI Auto SeanAude von Surround Off DV D8 Audio Input Stereo1 AV Audio Input Dolby Surround Standard Stereo Enter HN Return Turns on the surround function to create virtual rear speakers from a stereo TV or two separate front speakers e Off No surround effect e Surround 1 Creates one set of virtual surround speakers e Surround 2 Creates two sets of virtual surround speakers e Surround 3 Creates three sets of virtual surround speakers 4 When the playback signal does not contain surround audio signals the surround effects will not be heard When you select one of the surround modes turn off the surround
34. p Downmix DVDs only a Switches the method for mixing down to two channels when you play a DVD which has rear sound elements channels or is recorded in Dolby Digital format Dolby Surround Select this setting to enjoy Multi channel ww DVDs over two channels p e Normal Multi channel audio signals are downmixed to two EE 0s channels for use with your stereo mn Scan Audio On Surround Off Disc Setting DVID8 Audio Input Stereo1 4 the surround effect of Dolby Digital turn off the surround Zt etu AV Audio Input Stereo settings of this recorder Dubbing Move Enter Return Audio DRC Dynamic Range Control DVDs only Makes the sound clearer when the volume is turned down when playing a DVD e Standard Normal setting e TV Mode Makes low sounds clear even if you turn the volume pw down i Timer Downmix Dolby Surround e Wide Range Gives you the feeling of being at a live Edit Audio HDMI Mode performance Dubbing Sean Audio _ Surround Off Disc Setting DV D8 Audio Input Stereo1 Zt Setup AV Audio Input Stereo Move Enter N Return Audio HDMI Selects the output method from the HDMI OUT jack e Auto Normal setting Ups Audio 1200AM Outputs audio signals according to the status of the Title List Digital Out connected HDMI device Downmix abel Sd If the HDMI OUT jack
35. setting up this menu 1 With the unit in Stop mode No Disc mode press the MENU No Disc Features button Title List DVD Auto Chapter 5 Min 2 Press the A Y buttons to select Setup then press the ENTER button Edit VCR Function ubbin 3 Press the A Y buttons to select Features then press the A Anynet HDMI CEC On F ENTER button Setting Language Follow x Lo Features menu will be displayed Move Enter Return 4 Press the A V buttons to select Set Top Box Control then press the ENTER button m set Top Box Control menu will be displayed ae C ew Tm U 5 Press the gt buttons to select the desired item then press the Timer we nicis phun ENTER button Edit Changes to n will xul erase all timer settings e On Turns on the set top Cable box or satellite receiver control 28 function Setting e Turns off the set top Cable box or satellite receiver control fu nction Move Enter N Return Select this if you do not want to use the supplied set top box controller IR Blaster 34 When Set Top Box Control is set to On you can make the settings shown on the next few pages Note that when you change Set Top Box Control to On or Off all timer recording settings will be canceled When the power is off you cannot use the Set Top Box Control Brand Code Enter the brand code of your Set top Cable box or satellite re
36. settings of the connected TV or amplifier receiver DV D8 Audio Input No Disc Audio Title List Timer Edit Dubbing Disc Setting Setup Move 12 00 AM Digital Out Downmix Audio DRC Audio HDMI Scan Audio Dolby Surround Standard Auto DV D8 Audio Input AV Audio Input Enter HN Return e Stereo 1 Records original sound only Normally select this when dubbing a DV format tape from a camcorder e Stereo 2 Records additional audio only e Mix Records both original and additional sounds 2 Select Stereo 2 or Mix if you have added a second audio channel when recording with your camcorder AV Audio Input No Disc Audio 12 00 Title List Timer Edit Dubbing Disc Setting Move Digital Out Downmix Audio DRC Audio HDMI Scan Audio Dolby Surround Standard Auto Surround DVID8 Audio Input AV Audio Input Enter NReturn When recording from equipment connected to the AV input jacks to a DVD disc in this recorder select AV input audio e Stereo Records stereo sound only e Main Sub You can record audio from two different sources on the left and right channels with DVD RWs VR mode and DVD Rs VR mode You can select either the Main left or Sub right soundtrack when playing back Please refer to the AUDIO button See page 16 34 system setup No Disc Audio Title List Timer Edit Dubbing Disc Settin
37. the gt button Step Motion Play DVD VIDEO DVD RAM JM DVD RW DVD R JJ DVD RW DVD R During Pause mode press the F ADV SKIP button on the remote control e Each time the button is pressed a new frame will appear To return to normal speed playback press the k button 34 No sound is heard during Step or Slow mode 50 playback USING THE ANYKEY BUTTON The ANYKEY functions allows you to easily search for a desired scene by accessing title chapter track and time You can also change the subtitle and audio settings and set some features including Repeat and Angle Moving to a desired scene directly DVD VIDEO BM DVD RAM Ji DVD RW H DVD R H DVD RW R DVD R If you want to move to a certain title chapter or time use this function 1 Press the ANYKEY button during playback 2 Press the A V buttons to select Title Chapter or Time 3 Press the lt P gt buttons or number 0 9 buttons to select the desired scene When searching a time enter the time in the sequence of hours minutes seconds using the number buttons Remain 00 00 52 Subtitle ENG 4 Then press the ENTER button Ange ij 4 Adjust Enter s m fnm bx Z This may not work for some discs When an audio CD disc is inserted according to the disc type the information display may not be appear MOV8AV Id Time 00 00 52 Audio ENG Dolby D 2ch 1 1 The Time Search function does not operate on s
38. the SAMSUNG brand name are set forth in the applicable end user license agreement Non SAMSUNG hardware and software products if provided are on an AS IS basis Non SAMSUNG manufacturers suppliers publishers and service providers may provide their own warranties This limited warranty covers manufacturing defects in materials and workmanship encountered in normal and except to the extent otherwise expressly provided for in this statement noncommercial use of this product and shall not apply to the following including but not limited to damage which occurs in shipment delivery and installation applications and uses for which this product was not intended altered product or serial numbers cosmetic damage or exterior finish accidents abuse neglect fire water lightning or other acts of nature use of products equipment systems utilities services parts supplies accessories applications installations repairs external wiring or connectors not supplied and authorized by SAMSUNG or which damage this product or result in service problems incorrect electrical line voltage fluctuations and surges customer adjustments and failure to follow operating instructions cleaning maintenance and environmental instructions that are covered and prescribed in the instruction book product removal or reinstallation reception problems and distortion related to noise echo interference or other signal transmission and delivery problems SAMSUNG
39. the label facing up 80 reference TROUBLESHOOTING DVD PROBLEM EXPLANATION SOLUTION icon appears on the screen You cannot use the operation or function due to one of the following reasons 1 Your DVD disc does not support the feature for example angles 2 You ve requested a title chapter or scan time that is out of the correct range Play mode settings are different from the The disc does not support all the selected functions e SETS Sene WEIL In this case some settings you configure on the Setting menu may not work properly IT Cannot change the aspect ratio Aspect ratio is fixed on DVD disc m No audio output Check whether you selected the correct digital output in the Audio Output Options menu u No video or audio output Did you move your DVD Recorder amp VCR suddenly from a cold place to a warm place m The disc tray is ejected after 2 to 5 seconds n this case do not connect the plug to the power outlet and wait for two hours Then insert the disc and try to play back again It will work properly when condensation has evaporated Angle operation does not work during playback of a DVD disc Angle operation is available only when the disc contains images captured at different angles The disc revolves but no image or bad e Check whether there is damage or foreign materials on your disc quality images are output e Some discs with bad manufacturing quality may not be played back
40. ticis 14 Press the ENTER button Easy setup is finished All connections and setup operations are complete dNLAS IN3ISAS e Enter Return No Disc Easy Setup 12 00 AM Set the time and date manually Month Day Year 7 01 2008 Tue Hour Min AM PM 12 00 ZZ No Disc Easy Setup 12 00 AM Select your TV screen type 16 9 V 4 3 Letter Box 4 3 Pan Scan Enter Return No Disc Easy Setup 12 00 AM Easy Setup is finished Enter Return English _29 system setup 00000 CLOCK SET This menu is used to set the current time You need to set the time to use timer recording With the unit in Stop mode No Disc mode press the MENU button Press the A V buttons to select Setup then press ENTER Press the A V buttons to select Clock Set then press ENTER Press the A V lt gt buttons to select the Current Date and Time then press the ENTER button When the current time is stored in memory and then the set is powered off the current time will appear in the front panel display A V Sets the value You can set the value using the number 0 9 buttons lt p Moves to items Timer gt N Edit Dubbing Disc Setting iod Setup Move SETTING UP THE VIDEO OPTIONS No Disc Clock Set 12 00 Title List Set the time and date manually Month Day Year 01 2008 Tue Hour Min AM PM Enter Return This function al
41. 01 CD 04 31 TRACK01 CD 03 46 Displays the track list song list Displays the current file e gt 9 Select J Exit Displays available buttons English _53 Olayoack 0000000000000 Playing an MP3 Disc 1 Insert an MP3 disc into the disc tray e The menu is displayed 2 Press the A V buttons to select Music then press the ENTER button 3 Press the A V buttons to select the track you want to hear and then press the ENTER button MP3 Screen Elements 4 Current track song Displays the number of the track currently being played CER 9 This shows the operating state of a disc and a playback time corresponding to a portion that is currently played 7 SONGO2 MP3 3 Displays the track list song list SONG03 MP3 SONG04 MP3 SONGO5 MP3 Aa i i BR 4 Displays the current file Enter Return i 5 Displays available buttons 34 f select the Music MP3 files will only be displayed lf there are no files empty folder will only be displayed PLAYING BACK A PICTURE DISC JPEG 1 Insert a JPEG Disc into the disc tray 2 Press the A V buttons to select Photo and then press the Picture 1 10 Slideshow ENTER button Bon 3 Press the A V lt P buttons to select a picture e To see the next 6 pictures press the gt gt I button e To see the previous 6 pictures press the I button 4 1 If you press the PLAY 3 button the Slide
42. 03 1327 0069 0057 0015 0797 0144 0040 0710 0797 1136 0020 0009 0034 0259 0015 0273 0206 0058 1020 1015 0769 0011 0154 0009 0008 0003 0033 0014 0255 0011 0303 0007 0670 1018 0274 0315 0153 0015 0014 0400 0003 0014 0276 0011 0012 0020 0024 0015 0047 0098 0476 0031 0029 0111 0032 0054 0810 0028 0024 0069 0015 0040 0144 0440 0033 0812 0797 0027 0032 0334 0069 0618 0153 0000 0003 0476 0276 1476 0810 1376 1254 0400 1106 0156 0078 0063 0208 0069 0015 1018 0303 0012 Set top Cable box brand Myrio NET Next Level Nexus Northcoast Nova Vision Novabeam Novaplex NSC Oak Omega Omniview Optimus Pace Pacific Bell Panasonic Panther Paragon Penney Philips Pioneer Popular Mechanics Prelude Prism Protelcon Pulsar Quasar Quest R Line RadioShack Rampage Ranger RCA Realistic Recoton Regal Regency Rembrandt RK Runco Samsung Sasktel Scientific Atlanta Seam Sears Sejin Siemens Sigma Signal Signature SkyCable Skygiant SL Marx Code number 1117 0274 0764 1316 1315 1314 0770 0671 0314 0277 0008 0277 0618 0277 0017 0008 0156 0070 0203 0063 0400 0012 0618 0022 0637 0010 0044 0019 0007 0303 0248 0017 0015 0371 0021 0008 0237 0277 0477 0877 1877 0810 1376 1476 0843 0107 0021 0144 0008 0124 0307 0000 0040 0637 0000 0525 0008 0637 0000 0025 0081 0290 0027 0030 0153 0060
43. 2 Find the Set top Cable Box IR Sensor ius l A Turn the Set top Cable box Off P B Hold the Set top Cable box s remote so that it touches the front of the Set top Cable Box device see Figure 1 Correct Incorrect English 19 sating UR CM C Move the Set top Cable Box s remote across the front of the Set top Cable Figure 2 Box while pressing the remote s power button On and Off Figure 2 Press and release the power button each time you move the remote holding down the button will not work D When the Set top Cable box powers On you have found the sensor E Remember the location of the sensor 3 Placing the IR Blaster Place the Set top Cable box controller of the IR Blaster on top or underneath the Set top Cable box approximately 1 inch in front of the sensor you found in 2 Use the double sided tape to secure the IR Blaster You must select a Set top Cable box brand from the table on pages 42 44 If you do not know the brand name please contact your cable provider After setting up your Set top Cable box or satellite receiver with the DVD Recorder amp VCR through the IR Blaster cable you need to set up the Set top Cable Box Control menu See page 41 The DVD VR375 does not have a TV Tuner 20_ connecting amp setting up CONNECTING HDMI DVI TO A TV Connecting to a TV with an HDMI Jack HDMI High Definition Multimedia Interface
44. 76 0883 0001 0258 0097 1018 0029 0146 0040 0221 0063 0040 0001 0096 0010 0310 1256 0418 0274 0040 0012 0013 0029 0019 0059 0017 0003 0000 0303 0276 0153 0315 1248 0883 0255 0024 1018 0003 0303 Tusa 0035 0019 1476 0063 0040 0225 0022 0207 0153 0022 0007 0003 0014 0011 0276 0191 0078 0207 0056 0022 0039 0153 0077 0322 0315 0276 0008 0003 0017 0883 0246 0250 0000 0124 0244 0883 0770 0258 0289 0060 0063 0211 0618 01530027 0111 0030 0121 0883 1264 0883 0565 0078 0000 0525 0054 0017 0039 0153 0060 0315 0191 0899 0400 English _43 dNLAS WALSAS e Satellite receiver brand Satellite receiver brand Code number Satellite receiver brand Code number AlphaStar 0772 Mitsubishi 0749 Atlantic Telephone 1333 Motorola 0869 Bell ExpressVu 0775 NEC 1270 0496 0499 0507 0508 Century 0856 Netsat 0099 Chaparral 0216 Next Level 0869 Crossdigital 1109 Optimus 0724 1887 0749 0566 0392 1749 Panasonic 0247 0701 DirecTV 0099 1109 1076 1442 1856 Paysat 0724 0247 1142 1639 0724 0639 sms 1076 1142 0724 0722 0749 Dish Network System 0775 1005 1170 1442 1749 0856 0775 0099 Dishpro 0775 1005 Primestar 0361 0627 0869 Echostar 0775 1170 1005 Proscan 0392 0566 Expressvu 0775 QNS 1367 Galaxis 0863 RadioShack 0869 GE 0566 RadioShack 0566 0392 0143 0855 General Instrument 0361 0869 0627 Samsung 1109 1276 GOI 0775 Sky 0856 0099 1856
45. 99 files and folders e DVD RAM xRW zH discs that contain files can be played back English 5 getting stated 2 JPEG CD R RW e Only JPEG files with the jog JPG extension can be used e The unit can handle a maximum of 1000 files and folders e Maximum size of progressive JPEG is 3M pixels e MOTION JPEG is not supported e DVD RAM xRW zHR discs that contain JPEG files can be played back Using CD R RW e Use a 7OOMB 80 minutes CD R RW disc If possible do not use a 800MB 90 minutes or above disc as the disc may not play back e f the CD R RW disc was not recorded as a closed session you may experience a delay in the early play back time and all recorded files may not play e Some CD R RW discs may not be playable with this unit depending on the device which was used to burn them For contents recorded on CD R RW media from CDs for your personal use playability may vary depending on contents and discs e When recording from CDs for your personal use to CD R RW discs playability may vary depending on the contents and discs DVD R RW Disc Playback and Recording e Recording and playback can be performed on DVD R RW discs in both Video and VR Modes e Once a DVD R RW is recorded in VR or Video mode and finalized you cannot perform additional recordings e Once a DVD H RW is recorded in Video Mode and finalized it becomes a DVD Video e n both modes playback can be performed before and
46. DVD VR375 DVD amp VOR user manual Imagine the possibilities Thanks you for purchasing this Samsung product To receive more complete service please register your product at www samsung com global register 7 getting started WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK NO USER SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous CAUTION TO REDUCE THE RISK OF ELECTRIC This symbol indicates that there are voltage consisting a risk of electric shock SHOCK DO NOT REMOVE COVER OR BACK NO important operating and maintenance is present within this unit USER SERVICEABLE PARTS INSIDE REFER instructions in the literature accompanying SERVICING TO QUALIFED SERVICE PERSONNEL this unit Do not install this equipment in a confined space such as a bookcase or similar unit WARNING To prevent damage which may result in fire or electric shock hazard do not expose this appliance to rain or moisture CAUTION THIS DVD RECORDER amp VCR USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED BE SURE TO OPERATE THE RECORDER AS INSTRUCTED CAUTION THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN C
47. Dubbing connect the DV output jack of camcorder to the DV input jack of DVD Recorder amp VCR using a DV cable 1 With the unit in Stop mode press the MENU button in stop S Dubbing 2OAM Simple Dubbing 2 Press the A V buttons to select Dubbing then press the ENTER Timer button Edit 3 Press the A Y buttons to select DV D8 Dubbing then press the Disc ENTER button Setting Setup Move 9 Enter Return DV D8 Simple Dubbing You can find the dubbing start point to record on a disc easily by using the DV D8 Simple Dubbing function To setup follow steps 1 3 4 Press the A V buttons to select DV D8 Simple Dubbing then ua the ENTER button Title List The DV Tape Mode screen will be displayed ace cos Touch Dubbing 5 Select the playback related buttons using the lt P button to find gait the dubbing start point Dubbing Disc Setting 6 If you find start point press the lt button to select Record then press the ENTER button Dubbing starts Move 9 Enter Return Setup MOVE Enter Exit DV D8 One Touch Dubbing i lasse prm You can record the entire contents of a DV format tape onto a disc Win DVID8 Dubbing 12 00 AM easily by using the DV D8 One Touch Dubbing function Title List DV D8 Simple Dubbing Edit To setup follow steps 1 3 in page 68 4 Press the A V buttons to select DV D8 One Touch Dubbing th
48. Features then press the ENTER button Press the A V buttons to select VCR Function then press the ENTER button Press the A V buttons to select the desired VCR option below then press the ENTER button Press the A V buttons to select the desired item then press the ENTER button O Q A N Tape Length This information is usually printed on the tape box The menu cycles essai ws through 1120 T160 T180 Once the cassette type is set the VOR WIPE can display the amount of time remaining on the tape when you _ Badii i press the INFO button Dubbing Disc Setting i Setup Move Enter HN Return Auto Play If you want your videotapes to play automatically when you insert BETCTNUIGTTTUTTHE them turn on Auto Play Title List Tape Length On The VCH will automatically begin playing a video tape Ike when it is inserted as long as the safety tab of the Edit cassette has been removed Dubbing e Auto play is disabled Setting Move Enter HN Return Auto Repeat It sets the VCR to play a tape repeatedly unless a tape control is E TE ON activated Stop Fast Forward or Rewind 0 pm On Timer Auto Play e Off Edit Dubbing Disc Setting Setup Move Enter NReturn 40 system setup SET TOP CABLE BOX CONTROL If you have your Set top Cable box or satellite receiver connected as shown on page 189 it can be controlled after
49. MUTE Used to toggle the sound on and off 0 9 Used to input number directly TV 100 SET Button Used to select channels over 100 2 The various functions may not be able to be controlled on all televisions If you encounter problems operate the television directly English 15 GALYVLS 9NILI3O e Tour of the Remote Control DVD Button Press this when you use the DVD recorder player TV Button Press this to operate your TV POWER Button Press to power the DVD Recorder amp VCR on and off NUMBER Buttons TV 100 SET Button Press this to select channels 100 or higher on a TV Press this to change the Set top Cable box or satellite receiver channels For some Set top Cable box or satellite receiver brands F ADV SKIP Button Press to skip a disc backwards or forwards Playback related Buttons Forward Rewind Search Skip Stop Play Pause TV VOL Volume Button TV volume adjustment MENU Button Press this to bring up the DVD Recorder amp VCR s setup menu ENTER DIRECTION Buttons UP DOWN or LEFT RIGHT Buttons This button functions as a toggle switch INFO Button Press this to display current setting or disc status TITLE LIST DISC MENU Button Press this to enter the TITLE LIST Disc menu SUBTITLE Button Press this to switch the DVD s subtitle language ANYKEY Button Press this to set the status of the disc that is being played REC Button Press this to make a recording on VC
50. Moves the cursor one position backwards e Space Enters a blank and moves the cursor one forward to Iam 77 gt Move Enter Return Af Exit the right Title List e Delete Deletes the character at the cursor position ames Disc Format VR Mode e Clear Deletes all the character inputs Edit Disc Finalize Unfinalized Dubbing Disc Information e Disc Erese All Titles Setting Setup e Finish Registers the character inputs 5 Press the A V lt P buttons to select Finish then press the ENTER button A disc name is given to the disc Move Enter HN Return 2 You may need to clear disc protection before editing Depending on the kind of disc the displayed screen may be different Disc Protection Disc Protect allows you to protect your discs from being formatted or deleted due to unintended operations DVD RAM DVD R DVD RW DVD RW VR mode 1 With the unit in Stop mode press the MENU button 4 Disc Setting 2 Press the A V buttons to select Disc Setting then press the LL Tile bist Disc Name ENTER Timer Disc Protect Not Protected Disc Format VR Mode Edit Disc Finalize Unfinalized 3 Press the A V buttons to select Disc Protect then press the Dubbing Disc Information ENTER Disc Erese All Titles 4 Press the A V button to select Protected then press the ENTER Setup Move Enter C Return 76 editing Formatting a Disc
51. No and press the ENTER button then repeat from step 4 The display asks whether you want to rename the title To use the same name as before select No and press the ENTER button to cns finish 6 Press the lt P buttons to select Yes then press the ENTER button The Title Name screen is displayed em N RL 7 Follow steps 3 to 5 of Changing the Name of a Title page 70 to complete renaming The divided title appears in the Title List with the new name ADVANCED EDITING PLAYLIST VR mode mode 12 00 Title No 01 a j Start 00 00 02 End 00 00 00 Return 12 00 AM Hl Title Na 01 Do you want to divide title No 01 N Return Creating a Playlist Follow these instructions to create a new playlist title from a recorded title 1 With the unit in Stop mode press the MENU button 2 Press the A V buttons to select Edit then press the ENTER button 3 Press the A V buttons to select Create Playlist then press the ENTER button The Create Playlist screen is displayed 4 Press the ENTER button at the start point DVD RAM DVD RW DVD R VR mode mode English _73 YNILIGA e e The image and time at the start point are displayed on the Start 12 00 window lt s Scene No 01 e Select the starting point of the section from which you want to E create a new scene using the playback related buttons E Mw e Playback rel
52. OVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL CAUTIONS Caution To prevent electric shock match the wide blade of the plug to wide slot of the socket and fully insert This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment To prevent electromagnetic interference with electric appliances such as radios and televisions use shielded cables and connectors for connections FCC NOTE for U S A This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e ncrease the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the
53. Press the A V buttons to select DVD Auto Chapter then press the ENTER button Move Enter Return 2 Press the A V buttons to select Off 5Min or 15Min then press the ENTER button e Off No chapter mark is inserted e 5Min Inserts chapter marks at approximately 5 minute intervals e 15Min Inserts chapter marks at approximately 15 minute intervals Am i Press the EXIT button to exit the menu Wer 3 Press the REC button to start recording See page 58 about how 3 to set the recording mode 1 em 4 Press the STOP button to stop recording 5 During playback you can check the created chapters by pressing the ANYKEY button 34 m You can create up to 99 chapters Format DVD RW When inserting a unused DVD RW disc you can select a recording format VR mode or Video mode according to your needs Please refer to page DVD RW e VR Automatically formats the disc in VR mode ow Features 12 00 AM e Video Automatically formats the disc in Video mode LZ DVD Auto Chapter 5Min mer Format vo rw 1 EZRecord O Edit VCR Function Dubbing Set Top Box Control Disc Anynet HDMI CEC Setting Language Follow Move Enter Return English _35 system setup 0002 EZ Record This function allows you finalize a disc automatically DVD RW MUSS DVD RW DVD R V mode 1 Press the A Y buttons to select EZ Record then press the ENTER
54. R DVD RAM RW sR discs TO DVD DUBBING Button Press this when dubbing from the VCR to the DVD REC SPEED Button Press this to set the desired recording time and picture quality 16 getting started INFO PLAY LIST TITLE I an SUBTITLE ANGLE 2 REC MODE CANCEL TIMER 2 VCR REC REC SPEED VCR Button Press this when you use the VCR Press this to select the AV input signal in external input mode AV input DV input OPEN CLOSE Button Press this to open and close the disc tray TV POWER Button Press to power your TV on and off AUDIO Button Press this to access various audio functions Selects one of the audio tracks recorded on the disc when pressed repeatedly DVD RW VR R VR Selects the main or sub sound DVD VIDEO Selects the audio source TV MUTE Button This operates as Sound Mute TV mode TRK CBC CH TV CH Button Press this to adjust the tape tracking Use this to select a CBC Set top Cable box channel Use this to select a TV channel RETURN Button Returns to a previous menu EXIT Button Exit the current menu PLAY LIST TITLE MENU Button Press this to enter the Edit playlist Title menu ANGLE Button Press this to access various camera angles on a disc if the disc contains multiple camera angles EZ REC MODE Button See page 36 Use this to set the EZ REC MODE TIMER REC Button Press this when you use Ti
55. TR One Touch Recording OTR allows you to add recording time in preset increments up to 8 hours by pressing the REC button repeatedly e pereo DVD RAM DVD RW DVD R Up DVD R 1 If you want to record through a connected external component press the INPUT SEL button to select an appropriate external input AV1 AV2 or DV 2 Press the DVD or VCR button on the remote or DVD VCR on the front panel to select the DVD or VOR mode 3 Press the REC button to start recording 4 While in Record mode press the REC button again to activate the One Touch Recording e Record length 0 30 appears on the On Screen Display and the DVD Recorder amp VCR will record for exactly 30 minutes 5 Continue press the REC button to add recording time in preset increments up to 8 hours 0 30 gt 1 00 1 30 2 00 gt 2 30 gt 3 00 gt 8 30 5 4 00 4 30 gt 5 00 gt 5 30 gt 6 00 gt 6 30 7 00 gt 7 30 8 00 gt Normal e The DVD Recorder amp VOR stops recording automatically when the time has elapsed To stop recording 1 Press the STOP IB button The message Press STOP button once more to cancel Timer record is displayed 2 Press the STOP IB button again The message Updating the Information of disc Please wait for a moment is displayed 34 The timer counter decreases by the minute from the recording time set to 0 00 then the DVD Recorder amp VCR stops recording MAKING A TIMER RECORDING
56. ailable with DVD RW discs u w lt R This involves a function available with DVD R discs lt EIN CD This involves a function available with a data CD CD R or CD RW This involves a JPEG function available with CD R RW or DVD R RW O HAM discs em This involves function available with CD R RW or DVD R RW HAM discs VHS This involves a function available with VIDEO Tape This involves a case where a function does not operate or settings may be Caution cancelled NOTE This involves tips or instructions on the page that help each function operate One Touch button ANYKEY button A function that can be operated by using only one button A function that can be operated by using the ANYKEY button EE About the use of this user s manual 1 Be sure to be familiarize yourself with the Safety Instructions before using this product See pages 2 7 2 If a problem occurs check the Troubleshooting section See pages 80 82 Copyright 2008 Samsung Electronics Co All rights reserved No part or whole of this user s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co English _11 geting stated 0 HOW TO USE THE DVD RECORDER amp VCR Step 1 Select the disc type This unit can record on the following types of discs If you want to repeatedly record on the same di
57. also required if the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Handling Cautions e Before connecting other components to this recorder be sure to turn them all off e Do not move the recorder while a disc is being played or the disc may be scratched or broken and the recorder s internal parts may be damaged e Do not put a flower vase filled with water or any small metal objects on the recorder e careful not to put your hand into the disc tray e Do not place anything other than the disc in the disc tray e Exterior interference such as lightning and static electricity can affect normal operation of this recorder If this occurs turn the DVD Recorder amp VCR off and on again with the POWER button or disconnect and then reconnect the AC power cord to the AC power outlet The recorder will operate normally e De sure to remove the disc and turn off the recorder after use e Disconnect the AC power cord from the AC outlet when you don t intend to use the recorder for long periods of time e Clean the disc by wiping in a straight line from the inside to the outside of the disc e Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus e he Mains plug is used as a disconnect device and shall stay readily operable at any time Maintenance of Cabinet For safety reasons be sure to disconne
58. as been recorded by DAO Disc At Once on a PC cannot be unfinalized A DVD RW disc that has been recorded in Video Mode of a different manufacturer s recorder cannot be unfinalized A DVDR disc cannot be unfinalized Recording Formats Since available functions differ depending on the disc type select a disc that best fits your preference When you insert an unused disc the following message appears e DVD RAM RW R Format will be started automatically lt DVD RAM RW R gt e DVD R Initializing the disc is unnecessary 1 DVD RAM RW VR R VR e This mode involves multiple editing functions such as deletion of the whole title partial deletion of a title etc e Various editing options using a created Playlist DVD RW V R V e Chapters will be created automatically when you finalize recording on DVD R DVD RW discs in Video mode e Simple editing erasing titles changing title name Unformatted Disc Formatting Please wait RECORDING MODE With the unit in Stop mode select one of eight recording modes by pressing the REC SPEED button repeatedly for the desired recording time and picture quality In general picture quality improves as the recording time decreases In AUTO mode the most suitable record mode is adjusted automatically according to remaining time on the disc and length of the timer recording HO fh quality mode ise SP standard quality mode E LP ong recording mode
59. ated buttons 62 9 C2 69 9 9 See 1 mimm Aid 5 Press the ENTER button at the end point cina 02 15 AM End 00 00 00 e The image and end point time are displayed in the End Move G Enter Return window 0 Playlist 12 00 AM To make a new playlist E Ne Length Edit 0000131 6 Press the A V buttons to select Make then press the ENTER A 00 00 25 gt b utton 03 Sports A1 00 00 05 gt A new Make Scene screen is displayed A new Scene wil be added to the current Playlist vni MN Move Enter NReturn 4 You can check and see all the scenes on the Edit Playlist screen Repeatsteps 1 5 if you want to make a new playlist Repeat steps 4 5 if you want to make scenes of the playlist To return to Edit Playlist menu T Press the A V buttons to select Finish then press the ENTER button The Edit Playlist screen is displayed 14 You create up to 99 playlist titles Depending on the kind of disc the displayed screen may be slightly different m A disc that is recorded on this unit cannot be displayed playlist menu if EZ Record set to Playing Titles in the Playlist Follow these instructions to play the playlist titles DVD RAM DVD RW 4 DVD R VR mode 1 Press the TITLE LIST button with the disc stopped then press the PLAY LIST button EIUS LM The Edit Playlist screen is displayed gt EURER 2 Press the A V buttons to select the title you want to play fr
60. before playing a disc REGION CODE DVD VIDEO ONLY Both the DVD Recorder amp VCR and the discs are coded by region These regional codes must match in 1 order for the disc to play If the codes do not match the disc will not play The Region Number for this DVD Recorder amp VCR is described on the rear panel of the DVD Recorder amp VCR qu LOGOS OF DISCS THAT CAN BE PLAYED Doce dts Digital Out Dolby Digital DTS Digital Audio STEREO NTSC WE NTSC broadcast system in U S A Canada Korea Japan etc 46 playback DISC TYPES THAT CAN BE PLAYED Recorded Single sided 5 VIDEO Double sided 5 i IWW DVD VIDEO AUDIO Single sided 3 5 Double sided 3 5 COMPACT Single sided 5 AUDIO CD dise AUDIO Single sided 3 5 e Single sided 5 dio Qa Single sided 3 5 Single sided 5 y Single sided 5 4 7 GB VIDEO DVD RAM AUDIO Double sided 5 9 4GB VIDEO DVD RW DVD 5 4 7GB AUDIO Single Layer 5 4 7 GB VIDEO DVD R AUDIO Double Layer 5 8 5GB VIDEO DVD RW 5 4 7GB AUDIO Single Layer 5 4 7GB VIDEO DVD R AUDIO Double Layer 5 8 5GB English _47 Olayoack ooo Discs That Cannot be Played e DVD Video with a region number other than 1 or ALL e 3 9 GB DVD R Disc for Authoring e A DVD RW V R V 4R disc which has been recorded and not finalized in a different manufacturer s recorder e PAL discs
61. ceiver using the number buttons then press the ENTER button NEN enr SEITHER EEE TEE m No Disc Set Top Box Control 12 00 Title List Enter the brand code of Timer your set top box See Set top Cable box or Satellite Receiver Brand Code Table on pages 42 44 ee mimm Setting Cancel 34 f you cannot get the recorder to control your Set top Cable box or satellite receiver check the connection and position of the IR Blaster 0 9 Number G Enter JExit cable page 19 If your Set top Cable box or satellite receiver still does not operate with this recorder contact your cable company to see if they can provide you with a compatible Set top Cable box or satellite receiver This menu may not work depending on your Set top Cable box or satellite receiver English 41 SET TOP CABLE BOX SATELLITE RECEIVER BRAND CODE TABLE Set top Cable box brand Set top Cable box brand 3M ABC Accuphase Acorn Action Active Aim Allegro Amark American Americast Antronix Anvision Apache Arbatron Archer ASE Auna BBT BCC Belcor Bell amp Howell Bell Atlantic Bell South Bestlink Betavue British Telecom BVS Cable Healthcare Cable Star Cabletenna Cableview Century Citation Citizen Clearmaster ClearMax Color Voice Comband Comtec Comtronics Comtronics Eagle Contec Coolmax Curtis Mathes Dae Ryung Eagle Dae Ryung Diamond Digeo Digi Director Dumont Eagle Comtronics 42 system s
62. ck Please check the ZZynet logo If your TV has an Aftynee logo then it supports Anynet function During DVD recording you cannot watch VCR playback by pressing VCR as the HDMI OUT jacks will output DVD video signals only Connect the HDMI cable to the DVD Recorder amp VCR when it is in Stop mode fthe DVD Recorder amp VCR is connected to your TV in HDMI 1080p output mode you must use High speed category2 HDMI cable English 21 oOnneocotuna sating UR CM Connecting to a TV with Jack Using an HDMI DVI cable not included connect the HDMI OUT terminal on the rear of the DVD Recorder amp VCR to the DVI IN terminal of your TV An HDMI to DVI connection requires a separate audio connection using the audio cables connect the AUDIO red and white OUT AV OUT terminals on the rear of the DVD Recorder amp VCR to the AUDIO red and white IN terminals of your TV Turn on the DVD Recorder amp VOR and TV Press the input selector on your TV remote control until the DVI signal from the DVD Recorder amp VCR appears on your TV screen 2 To set the HDMI output resolution 480 720 10801 1080 see page 31 HDMI High Definition Multimedia Interface HDMI enables you to make a digital video and audio connection with a single cable Using HDMI the DVD and VCR player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input
63. corder while it is powered off 4 Press the STOP button to stop playback 2 When you stop playing the disc the DVD Recorder amp VCR remembers where you stopped When you press the PLAY button again it will pick up where you left off unless the disc is removed the DVD Recorder amp VCR is unplugged or if you press the STOP button twice This function is only applicable to DVD VIDEO DVD RAM DVD RW DVD R or Audio CDs CD DA Do not move your DVD Recorder amp VCR while playing as this may cause damage to the disc Make sure to press the OPEN CLOSE button to open or close the disc tray Do not push the disc tray while it is being opened or closed as this may cause a product malfunction Do not place foreign materials on or in the disc tray Some functions may perform differently or be disabled depending on the disc type If this occurs refer to the instructions written on the disc case Be especially careful that children s fingers are not caught between the disc tray and the tray chassis when it closes After turning the power on it will take a few seconds until the DVD Recorder amp VCR operates 48 playback USING THE DISC MENU AND TITLE MENU Some discs contain a dedicated menu system that allows you to select special functions for title chapters audio track subtitles film previews information on characters etc For DVD VIDEO Discs DVD VIDEO Disc Menu Press the DISC MENU button to
64. ct the AC power cord from the AC outlet e Do not use benzene thinner or other solvents for cleaning e Wipe the cabinet with a soft cloth Disc Handling e Use discs with regular shapes If an irregular disc a disc with a special shape is used this DVD Recorder amp VCR may be damaged o Holding discs e Avoid touching the surface of a disc where recording is performed 4 getting started DVD RAM DVD RW and DVD R e Clean with an optional DVD RAM PD disc cleaner Do not use cleaners or cloths for CDs to clean DVD RAM DVD RW DVD R discs DVD Video Audio CD e Wipe off dirt or contamination on the disc with a soft cloth Cautions on handling discs e Do not write on the printed side with a ball point pen or pencil e Do not use record cleaning sprays or antistatic Also do not use volatile chemicals such as benzene or thinner e Do not apply labels or stickers to discs Do not use discs fixed with exposed tape adhesive or leftover peeled off stickers e Do not use scratch proof protectors or covers e Do not use discs printed with label printers available on the market e Do not load warped or cracked discs GALYVLS S9NILI3O e Disc Storage Be careful not to damage the disc because the data on these discs are highly vulnerable to the environment e Do not keep under direct sunlight e Keep in a cool ventilated area e Store vertically e Keep in a clean protection jacket e f you move you
65. d e Jet Search Press and hold to advance the tape forward or backward at 7 times normal speed Skip In Play mode press F ADV SKIP button to cue ahead exactly 30 seconds Press F ADV SKIP button repeatedly up to 4 times to cue ahead 2 minutes English 55 pDlayback 0000000000000 Slow motion In Pause mode press button for slow motion Press the button repeatedly to play slow motion at 1 10 1 7 1 5 normal speed Press the PLAY button twice to resume normal viewing S VHS Playback The DVD Recorder amp VCR allows you to playback high quality S VHS tapes 1 Insert an S VHS tape into the VOR deck 2 Press PLAY button on the remote control or on the front panel to play an S VHS tape Variable Search System Each time you record a cassette on this DVD Recorder amp VCH an index is automatically marked on the tape when recording is started The Search function allows you to fast forward or rewind to a specific index and start playback from that point e This DVD Recorder amp VCR uses a standard indexing system VISS As a result it will recognize indexes marked by other VCRs using the same system and vice versa Go To Zero Use this feature when you want to search for the 0 00 00 counter position on a cassette 1 Press the CANCEL button at the point on the tape where you want to set the counter to 0 00 00 9 VCR 2 While the cassette is stopped press the ANYKEY button End search 3 Pres
66. derived from the media ID Disc contents cannot be copied to other media English _59 recording _ RECORDING IMMEDIATELY 299988 DVD RW DVD R Uy MA DVD RW DVD R Before you start 1 Make sure the antenna cable is connected 2 Press the OPEN CLOSE button and place a recordable disc on the disc tray 3 Check the remaining time on the disc DVD RAM DVD RW R discs should be formatted or initialized in advance before beginning recording Most new discs are sold unformatted Make sure to format your unformatted discs before recording 4 Press the OPEN CLOSE button to close the disc tray Wait until LOAD disappears from the front panel display Recording the current program you are watching 1 Press the TRK CBC CH TV CH buttons or number buttons to select the station you want to record 2 Press the REC SPEED button repeatedly to select the recording Speed quality Bin 7 3 Press the REC button Recording from external equipment you are watching 1 When using the set top cable box or satellite receiver control select the channel When not using the set top cable box or satellite receiver control select the AV1 or AV2 input Select the channel on connected set top cable box or satellite receiver before timer recording starts 2 Press the REC SPEED button repeatedly to select the recording Speed quality MESE co TP 3 When your DVD Recorder amp VCH is in the Stop mode set the operati
67. ding of the first program is complete the second program starts being recorded 8 Turn the power off to finish the timer recording e 4 will blink if a disc or tape is not inserted English _63 ONIdQdOO3H recording o 14 The timer recording time may differ from the set time depending on disc status and overall timer recording status for example recording times overlapping or when the previous recording ends within 3 minutes before the start time of the next recording EDITING THE TIMER LIST Follow these directions to edit the timer record list gessS DVD RAM DVD RW WIES DVD RW DVD R 55 Timer 1 Press the MENU button 2 Press the A V button to select Timer then press the ENTER oo p button Timer List 3 Press the A V button to select Timer List then press the ENTER button Dubbing Disc 4 Press the A Y button to select the number of the scheduled Setting record list you want to edit then press the ENTER button e he Edit and Erase items are displayed 5 Press the A V button to select Edit then press the ENTER Setup Move Enter Return Timer List 12 00 AM button f No Media Date Start End Ch Mode Edit e The Timer Recording screen is displayed Edit the items you DVD 0101 12 00 12 00 AV1 want to modify ic a c See the Timer Recording section for more information on Timer mcr Recording Input items See pages 62 63 6 Press the ENTER but
68. does not warrant uninterrupted or error free operation of the product THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS OR ANY OTHER SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE MISUSE OR INABILITY TO USE THIS PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE WITHOUT LIMITING THE FOREGOING PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS DAMAGE OR INJURY TO PURCHASER AND PURCHASERIS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY Some s
69. e Ch The video input source When using the set top cable box or satellite receiver control select the channel When not using the set top cable box or satellite receiver control select the AV1 or AV2 input oelect the channel on connected set top cable box or satellite receiver s side before timer recording starts Recording Mode DVD AUTO Select when you want to set video quality automatically In AUTO mode the most suitable record mode is adjusted automatically according to remaining time on the disc and length of the timer recording This function is selected only one mode in HQ HSP SP LSP ESP LP EP and SLP modes and you can use this mode for timer recording HQ Approx 1 hour HSP Approx 1 hour 30 minutes SP standard quality Approx 2 hours LSP Approx 2 hours 30 minutes ESP Approx 3 hour LP Approx 4 hour EP extended mode Approx 6 hour SLP long duration mode Approx 8 hours The dual layer DVD Rs have approximately double the capacity of single layer DVD Rs Recording Mode VCR AUTO Select when you want to set video quality automatically It depends on remaining time on the VCR tape SP Standard Play for best picture quality EP Extended Play for maximum recording time 3 times SP T Press the ENTER button will appear on the front panel It means that a timer recording is registered If the timer settings overlap The first program has priority After recor
70. elete a title from the Title List DVD RAM DVD RW 4 DVD R DVD RW DVD R 1 Press the TITLE LIST button The Title List screen is displayed Pm 2 Press the A V buttons to select a title you want to erase in the E e aant to aias Title List then press the ENTER button BIN Wrote Eee e 3 Press the A V buttons to select Title Erase then press the E ENTER button Jan 01 2008 E You will be prompted with a confirmation message cn do DVD RAM VH DVD RW VR mode Since a Playlist is present Move G Enter Return Q the message Do you want to erase No 01 If you have created a Playlist or Dubbing list with this title part of that playlist or Dubbing list will also be erased is displayed DVD RW Video mode DVD RW DVD R Since a Playlist is not present the message Do you want to erase 01 is displayed e The message may depend on the type of disc 4 Press the gt buttons to select OK then press the ENTER button 34 m You cannot erase a protected title If you want to erase a protected title select Off in the Title Protect menu Once a title is erased from the Title List it cannot be recovered Once a DVD R DVD RW is finalized it cannot be erased With DVD R discs titles are only erased from the menu however the Title remains physically on the disc Erasing a chapter Chapter Erase Follow these instructions to erase a chapter from the Title List
71. elled if the power is interrupted due to a power failure or other reason during recording Cannot record e Check whether the disc is formatted This product can record on formatted discs only See pages 58 77 e Check whether your DVD RAM DVDxRW DVD R disc has a sufficient free space pressed the REC button but there is no e Recording is available on DVD RAM DVD RW DVD R discs only pn e f a program is copy protected you cannot record it forgot the parental control password e Press and hold the CHY CHA IK lt button on the front panel of your unit for more than 10 seconds with no disc and then press the POWER OFF ON button All settings including the password will revert to factory settings Only do this if it is absolutely necessary Note that this function is available only when there is no disc inserted Cannot play the disc e Check whether the disc is inserted correctly with the label facing up e Check the regional code of your DVD disc e This DVD Recorder amp VCR cannot playback some types of disc See pages 48 No sound e Are you watching a program in slow or skip mode If you are playing a program at a speed other than normal speed sound is not output But you can hear sound during forward search FF1 in DVD VIDEO DVD RAM RW R disc e Check the connections and initial settings e Check whether the disc is damaged e Clean the disc if necessary e Check whether the disc is inserted correctly with
72. en press the ENTER button DVD Recorder amp VCR rewinds the tape in the digital video n camera and then starts recording the tape contents from the I beginning Move Enter Return When playback of the tape stops One Touch Dubbing ends automatically Dubbing r4 You cannot dub from a camcorder onto a videotape through the DV Input jack on this unit 68 recording his section introduces basic functions of DVD editing and explains both edit functions for recording on a disc and edit functions for the entire disc PLAYING THE TITLE LIST Follow these instructions to play back a scene from the Title List mee WOR Wis Wo 1 Press the TITLE LIST button The Title List screen is displayed 2 Press the A V buttons to select a Title then press the ENTER button 3 Press the A V buttons to select Play to play the title list then press the ENTER button The selected title will be played back 4 Press the STOP button to stop playing To return the title list screen press the TITLE LIST button ONILIGA e Title List Screen Elements 1 Playback screen for recorded titles Length recording date lock status recording mode 00 00 11 gt 00 00 09 3 Recorded title No gt 00 01 36 P 00 00 11 P Jan 01 2008 D 4 Recorded title name 12 06 AM of LSP Move Enter Return 5 Recording Length i e the playing time Title List Original 12 00 AM 6 Button disp
73. ence RECORDABLE DISCS This recorder can record on the following discs ONIdQHOO3H DVD ReWritable e DVD RWs and DVD RAMSs are rewritable e DVD Rs are non rewritable 2 Discs that cannot be recorded on 3 5 discs Compatibility between Samsung and other manufacturer s Recorders e X not possible Recording m Additional Recording in Disc Types Recording Device Sie s X DVD RAM VR Mode Samsung X Recordable Other Company Recordable m Not recordable VR Mode i not finalized Recordable Not recordable iili not finalized Recordable DVD RW man Not recordable V Mode not finalized Not recordable Not recordable iii not finalized Not recordable Not recordable VR Mode 2 not finalized Recordable en Not recordable ii not finalized Recordable DVD R Not recordable V Mode not finalized Not recordable Not recordable i not finalized Not recordable Not recordable in some cases DVD RW Other Company Not recordable in some cases Not recordable amsun i not finalized Not recordable in some cases DVD R Not recordable Other Company not finalized Not recordable in some cases English _57 recording on 34 Finalize his closes the DVD RW R so no additional recording can be done he DVD RAM RW disc cannot be finalized Unfinalize his allows additional recording on a DVD RW disc originally recorded on the DVD VR375 A DVD RW disc that h
74. enter the disc menu of the disc e Move to the setup menu related to playback operation e You can select audio language and subtitle etc provided by the disc Title Menu Press the TITLE MENU button to move to the title menu of the disc e Use this button if the disc contains more than one title Some discs may not support the title menu functionality For DVD RAM DVD RW DVD R Discs MOVEAV Id e SISTSIS S DVD RAM R DVD RW DVD R DVD RW IM DVD R Title List Press the TITLE LIST button The Title List is simply a list of titles on a disc If a title is deleted that title cannot be played again Playlist DVD RAM RW VR R VR Press the PLAY LIST button A playlist is a custom made list of titles When one playlist is played only the titles within the playlist will play and then stop Even if that playlist is deleted the original recording will not be deleted USING THE SEARCH amp SKIP FUNCTIONS Searching Through a Chapter or Track DVD VIDEO DVD RAM DVD RW DVD R CD DVD RW During playback press the SEARCH lt lt or gt gt button on the remote control Each time you press the SEARCH button the playback speed will change as follows v DVD VIDEO DVD RAM dn DVD RW DVD R Ww 9 lt gt gt FF1 lt q FRI gt gt gt FF2 FR2 bP FF3 lt q gt gt gt FF1 lt lt FRI omie a NI gt gt FF1 lt q FRI gt gt FF2 FR2 AUDIO CD CD DA pp
75. er No Disc or The disc cannot be played Please check the regional code of the disc will be displayed e f your DVD RAM DVDxRW DVD R disc is an illegal copy or is not in DVD video format it may also not be playable Disc Compatibility e Not all brands of discs will be compatible with this unit e he latest firmware upgrade to improve recording amp playback quality can be downloaded from our web site Download Center at www samsung com e f disc compatibility problems continue or there is an issue upgrading your recorder contact the Call Center at 1 800 SAMSUNG English 7 geting stated GETTING STARTED CONNECTING amp SETTING UP 8 getting started SYSTEM SETUP PLAYBACK 2 3 10 11 12 13 17 19 21 23 24 26 28 28 30 30 32 32 35 37 38 40 41 42 46 46 47 48 49 49 50 51 51 52 52 52 53 54 55 Warning Precaution General Features Before Reading the User s Manual How to use the DVD Recorder amp VCR Unpacking Description Connecting a set top cable box or satellite receiver to DVD Recorder amp VCR Connecting HDMI DVI to a TV Connecting the video output Connecting the Audio Cable Connecting External Devices On Screen Menu Navigation Easy Setup Clock Set Setting up the Video Options Progressive Scan Setting up the Audio Options Setting up the Features Setting up the Options Setting up the Parental VCR Function Setting Set top Cable B
76. etup Code number 0033 0008 0011 0017 0008 0014 0007 0001 0013 0206 0047 0237 0033 0008 0013 0047 0001 0011 0017 0014 0206 0007 1102 0237 0237 0237 1102 0015 0315 0153 0008 0277 0144 0056 0060 0899 0207 0022 0211 0111 0770 0014 0011 0003 0476 0153 0022 0207 0039 0797 0237 0260 1080 1269 0267 0276 0056 0022 0014 0641 0899 0303 0022 0003 0641 0769 0058 0056 0022 0039 0022 0153 0618 0008 0315 0017 0153 0315 0078 0242 0883 0883 1247 0031 0025 0233 0232 0274 0060 0040 0040 0060 0019 0883 0015 0242 0008 0008 0877 0477 0277 1877 0035 1476 1897 0637 0476 0637 0060 0028 Set top Cable box brand Eastern Electricord Emerson Everquest Focus Fosgate Fujitsu Funai FutureVision Garrard Gateway GC Electronics GE Gemini General Instrument GHZ Gibraltar Global GMI Goldstar Goodmind Gradiente Hamlin Healthway Interactive Hitachi Houston Tracker Hwalin Hytex IBM IEEC Interbuy Jasco Jebsee Jerrold Kuang Yu Leon LG Linsay Macom Maestro Magnavox Millennium Memorex Mitsubishi Motorola Movie Time MS MultiVision Code number 0002 0274 0418 0078 0797 0303 0015 0014 0040 0015 0400 0276 0246 0248 0019 0649 0153 0764 0207 0056 0330 0016 0040 0077 0030 0232 0233 0144 0021 0015 0070 0057 0242 0014 0797 0013 0400 0476 0011 0014 0098 0810 0024 0003 0015 0276 1376 1476 0078 00
77. g Move 12 00 AM Digital Out Downmix Audio DRC Audio HDMI Scan Audio Dolby Surround Standard Auto Surround DV D8 Audio Input Av Stereo NNNM AV Audio Input Enter N Return SETTING UP THE FEATURES This function allows you to setup the Features setting 1 With the unit in Stop mode press the MENU button Novice Features 4200AM 2 Press the A V buttons to select Setup then press the ENTER button Title List 2 Format DVD RW VR Press the A V buttons to select Features then press the ENTER gt P m E 3 Edit VCR Function Dubbing Set Top Box Control 4 Press the A V buttons to select the desired features options Anynet HDMI CEC On Setting Language Follow On e shown on the next few pages then press the ENTER button C F 5 Press the A V buttons to select the desired item then press the T ER SEN 7 ENTER button m lt DVD Auto Chapter Goss DVD RAM DVD RW DVD R Up DVD R A DVD Video consists of Titles and Chapters EX Nr When you record one program it makes one Title Tile List DVD Auto Chapter NOH i If you use this function the Title will be divided into Chapters Timer FormatDVD RW d recording a title is automatically divided into chapters by inserting BM osa chapter markings at specified intervals The markings are inserted Dubbing Set Top Box Control while the recording is being made BE croton o 1
78. g and playback You can record up to approximately 16 hours of video on a double side 9 4 GB DVD RAM disc up to 15 hours on a dual layer 8 5GB DVD R disc and up to 8 hours on a 4 7 GB DVD RAM DVD RW DVD R disc depending on the recording mode Creating DVD video titles using DVD RW DVD R discs With the DVD VR375 you can create your own DVD video titles on 4 7 GB DVD RW DVDR or 8 5GB DVD R discs A Variety of Recording Options You can set your DVD Recorder amp VCR to one of eight different recording modes each varying in recording quality and length Select a recording mode according to the time and picture quality you need For example if picture quality is your top priority select high quality If recording time is your priority SLP may be a possible choice Dual layer DVD Rs have approximately double the capacity of single layer DVD Rs Dubbing digital camcorder content using DV input jack Record digital camcorder images onto DVD RAM DVDxRW DVD R discs using the DV input jack IEEE 1394 4 See page 61 High quality progressive scan Progressive scanning provides high resolution and flicker free video The 10 bit 54 MHz DAC 2D Y C Separating circuitry and Time Base Corrector processor technology provide you with the highest image playback and recording quality See page 23 Component progressive scan output video is available in both DVD and VCR modes When the HDMI cable is connected off can not
79. g button on front panel or remote control TO VCR e To stop recording press the STOP button Set Setup Move 9 Enter C Return 34 Dubbing function is not allowed in progressive scan mode You can record VCR in a state of HDMI connected But you cannot dubbing from the DVD to VCR Dubbing from VCR to DVD a 99882 DVD RAM DVD RW M DVD R DVD R a DVD RW 1 With the unit in Stop mode press the MENU button in stop mode Mes u G 2 Press the A Y buttons to select Dubbing then press the ENTER button Title List Simple Dubbing VCR DVB 3 Press the A Y buttons to select Simple Dubbing then press the gt V Ta p ENTER button Edit 4 Press the A V buttons to select VCR DVD then press the isc Setting ENTER button 5 The Message Do you want to copy video contents to DVD will be displayed 6 Press the lt P buttons to select Yes then press the ENTER 9 Dubbing 12 00 AM button Setup Move 9 Enter Return r4 The VCR will fast forward searching for a start position and then automatically dubbing starts The Start and End points may not match up exactly 9 Enter C Return Direct dubbing VCR to DVD e Insert the VHS tape you want to dub e Insert a Recordable DVD disc e Press DVD dubbing button on front panel or remote control TO DVD e To stop recording press the STOP button English 67 recording o DV D8 DUBBING Before DV
80. hese instructions to erase a section of a Title List entry sU DVD RW E DVD R H DVD RW VR mode 1 Press the TITLE LIST button The Title List screen is displayed 2 Press the A V buttons to select a title you want to edit from the H Title List then press the ENTER button L 4 NM 3 Press the A V buttons to select A B Erase then press the ENTER putton No 2 Jan 01 2008 02 15 AM End 00 00 00 The Erase screen is displayed 4 Press the ENTER button at the starting point The image and starting point time are displayed in the section Move Enter C Return deletion starting point window Title No 03 5 Press the ENTER button at the end point uo f E aa The image and end point time is displayed in the Section deletion E a E I ending point window mo MESSI 6 Press the A V buttons to select Erase then press the ENTER meme um button 01 2008 02 15 AM 7 Press the lt buttons to select OK then press the ENTER donis button The selected section has been deleted AB Erase 12 00 AM To return to the Title List press the A Y buttons to select Finish E Do you want to erase Erased part will not be restored 7 UO UZ 19J MUT Enter Return Erase Screen Elements Playback bar AB Erase 12 00 AM Et I 3 Title No 02 a E E pe i x
81. jack HDMI is completely compatible with DVI The only difference between HDMI and DVI is that HDMI supports multi channel audio HDMI connection description HDMI connector Both uncompressed video and digital audio data LPCM or Bit Stream Even though the DVD Recorder amp VCR records analog audio and video with HDMI the analog signal is converted to digital signal and is sent to the TV Both DVD and VCR playback is possible through HDMI f your TV does not support HDCP High bandwidth Digital Content Protection snow noise appears on the screen Why does Samsung use HDMI Analog TVs require an analog video audio signal However when playing a DVD the data transmitted to a TV is digital Therefore either a digital to analog converter in the DVD Recorder amp VCR or an analog to digital converter in the TV is required During this conversion the picture quality is degraded due to noise and signal loss HDMI technology is superior because it requires no digital to analog conversion and is a pure digital signal from the DVD Recorder amp VCR to your TV Whatis the HDCP HDCP High bandwidth Digital Content Protection is a system for protecting DVD content output via HDMI from being copied It provides a secure digital link between a video source PC DVD etc and a display device TV projector etc Content is encrypted at the source device to prevent unauthorized copies from being made 22 connecting amp setting up
82. lay No Length Edit Edit menu Play Plays the selected title Title Erase Erase the selected title from the list Dm Chapter Erase Erase the selected chapter from the title BEN Protect Locks or unlocks the selected title Move G Enter DT Title Name Changes the name of a selected title A B Erase Erase the selected section scene from the title Divide Title Divide a title into two 4 This may depend on the disc type DVD RW V RW R V R discs have limited editing functions English 69 BASIC EDITING TITLE LIST Changing the Name of a Title Title Name Follow these instructions to rename a title list name i e to edit the title of a recorded program DVD RAM DVD RW i DVD R QNM DVD R rr a ai 0 Title Name 12 00 AM 1 Press the TITLE LIST button The Title List screen is displayed Sports A1 2 Press the A V buttons to select a title you want to rename from the Title List then press the ENTER button 3 Press the A V buttons to select Title Name then press the d i n 5 x ENTER button The Title Name screen is displayed Backspace Space Delete Clear Finish 4 Select the desired characters using the A V gt buttons then press the ENTER button Move Enter C Return J Exit e Backspace Moves the cursor one position backwards e Space Enters a blank and moves the cursor one forward to the right No Title Length Edit er 53
83. lows you to setup the video setting This function depends on disc type It may not work for some disc types 1 With the unit in Stop mode press the MENU button No Disc Setup 12 00 AM Clock Set Audio Features Options Easy Setup Enter C Return 2 Press the A V buttons to select Setup then press the ENTER Title List button S 3 Press the A V buttons to select Video then press the ENTER Edit button el Video setup menu will be displayed setting 4 Press the A V buttons to select the desired video option shown on the next few pages then press the ENTER button ums b Press the A V buttons to select the desired item then press the ENTER button 34 Press the RETURN button to return to the previous menu Press the EXIT button to exit the menu TV Type Depending on the type of television you have you may want to adjust the screen setting aspect ratio e 16 9 You can view the full 16 9 picture on your wide screen TV e 4 3 Letter Box Select when you want to see the total 16 9 ratio screen DVD supplies even though you have a TV with a 4 3 ratio screen Black bars will appear at the top and bottom of the screen e 4 3 Pan Scan Select this for conventional size V when you want to see the central portion of the 16 9 screen Extreme left and right side of movie picture will be cut off No Disc Video Title List Timer Edit Dubbing Disc Setting tt Setup Move 30_ system
84. ly to select the channel or input source for DVD or VCR e Choose REC mode for DVD or VCR e Press REC button for DVD or VCR 34 When the DVD Recorder amp VCR is connected to your TV using HDMI or Component video cables the VCR s playback screen will not be displayed during DVD recording You cannot record different channels at the same time The DVD and VCR cannot start recording at the exact same time You must set one mode to start recording then the other DUBBING TO DVD OR VIDEO You can copy from the DVD to VIDEO or VIDEO to DVD Check the remaining time on the tape and disc 66 recording Dubbing from DVD to VCR uU DVD RW DVD R Cu DVD R 1 With the unit in Stop mode press the MENU button ETT AE 2 Pressthe A Y buttons to select Dubbing then press the ENTER button Title List Simple Dubbing RSS Dvib amp Dubbig DV ver 3 Press the A V buttons to select Simple Dubbing then press the ENTER button 4 Press the A V buttons to select DVD VCR then press the sc Setting ENTER button The Message Do you want to copy DVD contents to Video will be displayed 5 Press the lt gt buttons to select Yes then press the ENTER button cz ERU Is Direct dubbing DVD to VIDEO nm c EE Ti Setup Move Enter Return ONIGHOOAY e Insert a DVD disc you want to dubbing Do you want to copy DVD contents to Video e Insert a VHS tape CE e Press the VCR dubbin
85. mer Recording TO VCR DUBBING Button Press this when dubbing from the DVD to the VCR CANCEL Button This is a special remote control for the visually impaired and has Braille points on the POWER STOP ana PLAY buttons DESCRIPTION Front Panel RAM RW R 15 114 13 12 1 DVD OPEN CLOSE BUTTON 4 CH V A SEARCH SKIP BUTTON RECORD BUTTON FRONT PANEL DISPLAY 13 AUDIO L R INPUT JACKS AV 2 IN x VCR DECK PLAY PAUSE BUTTON DUBBING BUTTON DVD DECK VIDEO INPUT JACK AV 2 IN 3 VCR EJECT BUTTON 6 STOP BUTTON 9j DVD VCR SELECT BUTTON 42 DV INPUT JACK 15 POWER BUTTON English 17 GALYVLS S9NILI3O e getting stated 202 Front Panel Display 4 Dy BBBSBE am T ii HDMI 6 27 DOE ik 11080iP 720P d 1 Playback related indicator 4 VCR VIEW Indicator HDMI Indicator Rear Panel In Disc Indicator Disc Media Indicator 8 REC Indicator 3 DVD VIEW Indicator 6 TIMER Indicator 9j STATUS Indicator 1 HDMIOUT 4 AUDIO OUT JACKS COMPONENT OUT AUDIO OUT JACKS AV OUT 18 getting started III e SET TOP BOX CONTROL 2 VIDEO INPUT JACK AV 1 IN 5 COMPONENT VIDEO OUT JACKS 8 AUDIO INPUT JACKS AV 1 IN 2 3 4 5 AV IN AVOUT AUDK OUT on MENT Le oi O MS iN I I
86. n the on screen menu and then use the following buttons to navigate through the on screen menus Im 1 A V Buttons Title List Timer Standard a Timer Timer List Edit Press these buttons on the remote control to move the selection bar A V to cycle through the menu options 2 ENTER Button Press this button on the remote control to confirm any new settings NH 3 RETURN Button Setup Press this button on the remote control to return to the previous Move G Enter Return menu screen displayed or to exit the on screen menu 4 EXIT Button Press this button to exit the on screen menu Dubbing EASY SETUP Follow the steps below to make the minimum number of basic adjustments for using the recorder Settings are made in the following order 1 With the unit in Stop mode press the MENU button No Disc Setup 2 Press the A V buttons to select Setup then press the ENTER Eis button Audio 3 Press the A V buttons to select Easy Setup then press the TORUM isis ENTER button E The message Follow the guide to make initial settings Before you start Check that you have made all necessary connections is displayed Move Enter Return 4 Press the lt gt buttons to select Start 5 Press the ENTER button The setup display for selecting the language used in the on screen display appears Select the screen language 6 Press the A V buttons to select the desired la
87. nguage then press the ENTER button ______ The setup display for Set top Cable box or satellite receiver control appears G Enter Return 7 Select whether you ll be using the Set top Cable box or satellite receiver control and press the ENTER button If you want to use the Set top Cable box or satellite receiver control select Yes your set top box with this recorder Changes to the current setting will If not select No then go to step 11 erase all timer settings 8 Press the number buttons to enter the brand code of your Set top Cable box or satellite receiver see page 41 No To re enter the code number select Cancel and return to step 7 No Disc Easy Setup 12 00 AM Enter HN Return 28_ system setup 9 Press the lt gt buttons to select OK then press the ENTER ET M button Enter the brand code of 10 Select whether or not you use the Set Top Box Pass through your set top box then press the ENTER button Please refer to page 39 The setup display for clock setting appears 11 Press the A Y lt buttons to select the Current Date and Time OK Cancel then press the ENTER button 12 Select the setting that matches your TV type For details see page 30 Enter Return No Disc Easy Setup 12 00 AM 13 Press the A V buttons to select the desired TV screen type then press the ENTER button MM LL MEM The message Easy Setup is finished is displayed Mendes met
88. om Tr the Playlist then press the ENTER button 3 Press the A V buttons to select Play then press the ENTER n button 12 06 AM The playlist titles will be played back Move Enter ORetum 4 Press the STOP putton to stop playino 74_ editing Changing the Name of a Playlist Follow these instructions to rename a playlist title i e to edit the title of a playlist title DVD RAM DVD RW JM b DVD R VR mode 1 Press the TITLE LIST button with the disc stopped then press wu uuu the PLAY LIST button Dolphin The Edit Playlist screen is displayed B d 2 Press the A V buttons to select the title you want to rename from the Playlist then press the ENTER button 3 Press the A V buttons to select Title Name then press the ENTER button The Title Name screen is displayed Enter ORetum exit e 0 t y G L Q s V x 9e Backspace Space Delete Clear Finish ONILIGA e 4 Enter the desired characters using the A V buttons px o Playlist 12 00 AM e Back Space Moves the cursor one position backwards DES eng i e Space Enters a blank and moves the cursor one forward ES TONS to the right NVA 00 00 09 S L Dolphin 00 01 36 gt Delete Deletes the character at the cursor position 0000 gt R Dolphin e Clear Deletes all the character inputs Janl01 2008 12 06 e Finish Registers the character inputs Move 9 Enter Return 5 Press the A
89. ome discs make the sub menu disappear press the ANYKEY or RETURN button again SELECTING THE AUDIO LANGUAGE Audio languages may not work depending on the disc type This is only available during playback You can also operate this function by pressing the AUDIO button on the remote control O DVD VIDEO 1 Press the ANYKEY button during playback 2 Press the A V buttons to select Audio then press the lt gt Title 2 6 buttons to select the desired audio language Chapter 20 3 Press the ENTER button ao ERT a w Remain 00 00 52 Subtitle ENG Angle 2 Audio languages may be different because they are disc specific J Some discs allow you to select the audio language for the disc menu ie only make the sub menu disappear press the ANYKEY or RETURN button again English _51 pDlayback 0000000000000 REMAIN You can check the remaining time of the current title 1 Press the ANYKEY button during playback e Title 2 6 Chapter 3 42 Time 00 00 52 Audio ENG Dolby D 2ch 1 1 Remain 00 00 52 Subtitle ENG Angle 4 4 Move X SELECTING THE SUBTITLE LANGUAGE O DVD VIDEO This enables you to select the available subtitle languages on a disc Subtitle languages may not work depending on the disc type This is only available during playback You can also operate this function by pressing the SUBTITLE button on the remote control
90. on mode of your external devices to play mode 4 Press the REC button on your DVD Recorder amp VCR when the image from which you want to start recording is displayed To pause recording Press the PAUSE button to pause a recording in progress e Press the PAUSE button again to resume recording e You can switch channels the set top cable box or satellite receiver by pressing the TRK CBC CH TV CH buttons while recording pauses To stop recording Press the STOP button to stop a recording in progress e When using DVD RAM DVD RW R discs the message Updating the information of disc Please wait for a moment is displayed 60 recording 4 m You can not change the recording mode and the program while recording Recording will stop automatically if there is no free space left on the disc Upto 99 titles can be recorded onto a DVD RAM RW R disc up to 49 titles onto a DVD RW R disc fthe power interrupted due to power failure or other reasons the title being recorded will not be saved onto the disc Recording will stop automatically if a copy protected image is selected o not use DVD R authoring discs with this unit Refer to the user manual for your External Devices when recording from external equipment using the Audio Video cable RECORDING THROUGH THE DV INPUT JACK ONIqHuOO3H You may control a Camcorder connected to the DV Input jack on the DVD Recorder amp VCR Follow these directions
91. only available with SAMSUNG TVs that support Anynet 1 Press the A V buttons to select Anynet HDMI CEC then press the Mme LLL ENTER button Title List DVD Auto Chapter 5Min Anynet HDMI CEC items will be displayed Timer Format DVD RW 2 Pressthe A V buttons to select On then press the ENTER button Edit inum Dubbing Set Top Box Control Soe Disc Setting Language Follow Move Enter N Return For using Anynet HDMI CEC 1 Connect the DVD Recorder amp VCR to the TV by using an HDMI cable See page 21 2 Set the Anynet HDMI CEC to On on your DVD Recorder amp VOR see above 3 Set the Anynet function on your TV See the TV instruction manual for more information 36 system setup e You can operate the DVD Recorder amp VCR by using TV remote control TV buttons that can be used to control the DVD Recorder amp VCR O 9 5 02 0 and Q f buttons 0 button e When you press Anynet button on the TV remote control the OSD to the right will appear Recording DVDR Use this option to start or stop recording DVDR Menu Same as MENU button on the DVD Recorder amp VOR remote control 4 By pressing the PLAY button of the recorder while watching TV the TV screen will change to the play screen fyou play a DVD when the TV power is off the TV will power On f you tum the TV off the DVD Recorder amp VOR will power off automatically When
92. only with a dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do notinstall near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat English 3 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A groundingtype plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Service is required when the apparatus has been damaged in any way such as the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus Service is
93. ontrol or front panel For options while recording is in progress see Special Recording Features 5 Press the STOP button to stop or finish a recording in progress English 65 recodo on CHECK REMAINING TIME Press the INFO button on the remote control The following information will be displayed Current deck status recording speed remaining time input channel We current time m Y a i 4 m IT pn Wed Jan 02 2008 12 00 AM L SPECIAL RECORDING FEATURES While a recording is in progress you can watch a DVD or for example you can watch VCR playback while recording from a DVD and vice versa 1 Watch a different media during recording You can watch a DVD during VCR recording or watch a Video tape during DVD recording e During VCR recording insert a DVD in the DVD deck The output will automatically change to the DVD and start playback DVD Video discs only e During DVD recording insert a Video tape in the VCR deck The output will automatically change to the VCR and start playback Only if the tape is missing the safety tab 2 To Add Recording Time Refer to the One Touch Recording OTR See page 62 3 Recording on the DVD and VCR at the same time You can record on the DVD and VCR at the same time but both modes must be set up to record separately e Press the DVD VCR button to set the unit to DVD or VCR mode e Press CH or INPUT SEL button repeated
94. ox Control Set top Cable Box Satellite Receiver Brand Code Table Region code DVD Video only Logos of Discs that can be played Disc types that can be played Playing a Disc Using the Disc Menu and Title Menu Using the Search amp Skip Functions Slow Motion Play Step Motion Play Using the ANYKEY button Selecting the Audio language Remain Selecting the Subtitle Language Changing the Camera Angle Playing Back an Audio CD CD DA MP3 Playing back a Picture Disc Playing back a VHS Tape VCR RECORDING EDITING REFERENCE APPENDIX 57 58 59 60 61 62 62 64 64 65 66 66 66 68 69 70 73 76 80 81 82 83 85 Recordable discs Recording Mode Unrecordable Video Recording immediately Recording through The DV Input jack Making a One Touch Recording OTR Making a Timer Recording Editing the Timer List ERASING the Timer List Basic VCR Recording Check Remaining Time Special Recording Features Dubbing to DVD or VIDEO DV D8 Dubbing Playing the Title List Basic Editing Title List Advanced Editing Playlist Disc Setting Troubleshooting DVD VIDEO DVD RAM DVD RW DVD R Troubleshooting DVD Troubleshooting VCR Problems and Solutions Display error Message Specifications English _9 GALYVLS SNILL3S e GENERAL FEATURES The DVD VR375 allows you to record edit and play high quality digital video on DVD RAM DVDxRW DVD R discs High quality digital audio video recordin
95. port progressive scan Progressive Scan Output 480p Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture If you experience 480p progressive scan picture problems it is recommended that you switch the connection to the standard definition output If there are questions regarding TV set compatibility with this model please contact our customer service center at 1 800 SAMSUNG The Component jacks will not output video resolutions above 480p To view 720p 10801 and 1080p connect the DVD VR375 to your TV with an HDMI HDMI cable With HDMI connected set the progressive scan to alternate between all available resolutions See page 31 During DVD recording you cannot watch VCR playback by pressing VCR as the COMPONENT VIDEO OUT jacks will output DVD video signals only English 23 ONNeCTINAGA sating UR CM Connecting a Video Input Jack Connect a video yellow cable between the VIDEO yellow OUT jack on the DVD Recorder amp VCR and VIDEO yellow IN jack on the TV Audio Video Cable v Yellow Red e You will enjoy regular quality images This connection outputs the 480i resolution to your TV e Connect the audio cables white and red between the AUDIO OUT jacks on the DVD Recorder amp VCR and AUDIO IN jacks on your TV or AV amplifier See pages 24 25 CONNECTING THE AUDIO
96. r DVD Recorder amp VCR suddenly from a cold place to a warm place condensation may generate on the operating parts including the lens and cause abnormal disc playback In this case do not connect the plug to the power outlet and wait for two hours Then insert the disc and try to play back again It will work properly when condensation has evaporated Disc Specifications DVD Video e A digital versatile disc DVD can contain up to 135 minutes of images 8 audio languages and 32 subtitle languages It is equipped with MPEG 2 picture compression and Dolby 3D surround allowing you to enjoy vivid and clear theater quality images in the comfort of your own home e When switching from the first layer to the second layer of a double layered DVD Video disc there may be momentary distortion in the image and sound This is not a malfunction of the unit e Once a DVD RW V R V R recorded is finalized it is playable in a standard DVD player Audio CD e An audio disc on which 44 1kHz PCM Audio is recorded e Plays CD DA format audio CD R and CD RW discs This unit may not be able to play some CD R or CD RW discs due to the condition of the recording CD R RW CD R RW e Only CD R discs with files recorded with ISO9660 or JOLIET format can be played back e Only files with the mp3 or extension can be used e Playable bitrate range is from 32 Kbps to 320Kbps e he unit can handle a maximum of 4
97. reasing the black level e Personal Adjusts Contrast Brightness Color and Hue using A Y lt gt buttons English 31 dNLAS IN3ISAS e system This function is available when video output is component This setting M78 enables you to select a desired progressive mode To view Progressive scan mode first connect the component cable See page 23 Be sure the Timer Resoiution HDMI c __ Video HDMl YCbC Component cables are connected properly _ pem Mee Dubbin Picture Control Standard On Pee Pewesve SB Setting Move Enter Return 2 When the HDMI cable not supplied is connected can not be selected Progressive setting is only available when the Recorder is in stop mode SETTING UP THE AUDIO OPTIONS This function allows you to set up the Audio options No Disc Setup 12 00 AM 1 With the unit in Stop mode press the MENU button 0 pw 2 Press the A V buttons to select Setup then press the ENTER Timer button Edit Features 3 Press the A Y buttons to select Audio then press the ENTER 2 auta button 4 Press the A V buttons to select the desired audio option shown on the next few pages then press the ENTER button daos sicud Aretum b Press the A V buttons to select the desired item then press the ENTER button 34 Press the RETURN button to return to the previous menu Press the EXIT button to exit the menu Digital Ou
98. receiver is connected e Consult the dealer or an experienced radio TV technician for help Caution FCC regulations state that any unauthorized changes or modifications to this equipment may void the user s authority to operate it 2 getting started 2 This unit can be used only where the power supply is AC 120V 60Hz It cannot be used elsewhere This DVD Recorder amp VCR is designed and manufactured to respond to the Region Management Information If the Region number of a DVD disc does not correspond to the Region number of this the DVD Recorder amp VCR cannot play the disc This device is protected by U S Patent Nos 6 836 549 6 381 747 7 050 698 6 516 132 and 5 583 936 This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited This product is covered by one or more of the following U S patents 5 060 220 5 457 669 5 561 649 5 705 762 6 043 912 6 438 099 6 467 061 6 556 521 6 578 163 6 697 307 6 728 474 6 771 891 6 894 963 6 895 593 6 937 815 6 996 327 7 009 926 7 085 221 7 088 649 7 092 327 7 099 566 7 123 564 7 142 493 7 142 495 7 145 861 7 146 624 7 151 729 7 161 879 7 164 647 7 167 437 7 173 891 7 177 250 7 194
99. s using the A Y buttons then press the ENTER button aasan Caaahaaausasssas NoDisc Set Top Box Control 12 00 AM Title List Brand Code 0000 e Select this when your Set top Cable box or satellite OO receiver only accepts three or more digit channel numbers Edit Mode for SET button EE Normally select this Dubbing Disc e Lock to 2 digits Select this when your Set top Cable box or Setting satellite receiver only accepts a two digit channel number Move Enter Return Mode for SET button Some Set top Cable box or satellite receiver require you to press SET o uD after pressing the channel number If your Set top Cable box or Title List Brand Code satellite receiver operates this way follow the instructions below to set Timer Sonde Mode 1 or 2 Select the sub item Off Mode 1 or Mode 2 using the 1 AY buttons then press the ENTER button re Disc e Off No code is sent when the SET button is pressed Setting Normally select this e Mode 1 or Mode 2 Sends the channel number you entered ud ARetum 34 f Mode 1 does not work try Mode 2 f your Set top Cable box or satellite receiver does not respond to either setting contact the manufacturer of the Set top Cable box or satellite receiver English _45 dNLAS IN3ISAS e pDlayback 0000000000000 This section introduces basic functions of playback by disc type Head the following information
100. s been finalized When using a DVD R disc You should finalize the disc to play it on other DVD players No more editing or recording can be made on the disc once it has been finalized GALYVLS 9NILI3O e 2 You can finalize automatically using the EZ REC MODE See page 36 UNPACKING Accessories Check for the supplied accessories below ooo00 otto i Video Audio Cable IR Blaster cable Remote Control AC39 00073A AK39 00055A AK59 000844 Batteries for Remote Control AAA Size Instruction Manual Quick Guide AC43 12002H AK68 0161 3A AK68 016144 English 13 Connecting the Power Cord After all connections are complete plug the power cord into a wall outlet 9 1 Liftthe cover at the back of the 2 Install two AAA size batteries 3 Replace the cover remote control upward as shown Make sure to match the and Assuming typical TV usage ends of the batteries with the diagram the batteries last for about one inside the compartment year If the remote control does not operate properly e Check the polarity of the batteries e Check if the batteries are drained e Check if the remote sensor is blocked by obstacles e Check if there is any fluorescent lighting nearby Dispose of batteries according to local environmental regulations Do not put them in the household trash 14 getting started You can con
101. s converted from 50Hz to 60Hz for 720p 1080i 1080p HDMI High Definition Multimedia Interface Output e Please refer to the user s manual of your TV English 81 reference eee TROUBLESHOOTING VCR Before contacting Samsung customer service perform the following simple checks PROBLEM EXPLANATION SOLUTION No power e Check that the power plug is connected to a wall outlet e Have you pressed the POWER button You cannot insert a video cassette e A video cassette can only be inserted with the window side up and the safety tab facing you Timer recording was unsuccessful e Re check the recording start stop time settings and the current time e Check whether you insert a tape which has enough time record No playback picture or the picture is distorted Check to see if you are using a prerecorded tape When the button is pressed during playback e A still picture may have noise bars depending on the condition of the tape Press the still picture has severe noise bar streaks the TRK CBC CH TV CH A V buttons during slow motion to minimize this effect Video Head Cleaning e f poor pictures appear on a variety of cassettes the video heads may need cleaning This is not a common problem and unless it appears the heads should not be cleaned When cleaning the video heads read all instructions provided with the head cleaning cassette Incorrect head cleaning can permanently damage the video heads If you are unable
102. s input from the AV1 IN AUDIO VIDEO jacks to pass through to all output jacks ZZ without turning on the recorder Setting e Off No signals are sent when the recorder is turned off Move Enter N Return Factory Setting Front Display No Disc Options 12 00 Y Adjusts the lighting of the front panel display EE e Auto Adjusts to low lighting when power is off __ e STB Pass Through Edit e Bright Maintains bright lighting when power is off e Dimmer Maintains low lighting regardless of whether power is E Setting on or off e Off Turns off the lighting when power is off Maintains the lighting when power is on Dubbing Move Enter Return Factory Setting Allows you to return the setup setting to their factory defaults ETT ES Title List Z Al of your previous settings will be lost Dubbing NT Str Move Enter Return 1 Press the A V buttons to select Factory Setting then press the ENTER button 2 Select Start and press ENTER The setup settings return to their factory defaults 3 Press ENTER when Finish appears English 39 system setup 000 VCR FUNCTION SETTING This function allows you to set up the VCR With the unit in Stop mode No Disc mode press the MENU button Press the A V buttons to select Setup then press the ENTER button Press the A V buttons to select
103. s the A V buttons to select Go To Zero then press the Forward Intro Scan ENTER button Reverse Intro Scan The VCR will rewind or fast forward searching for the 0 00 00 LL EN Sn counter position and then automatically stop at that position End Search Use this feature when you want to search for a blank position to record a program on a cassette 1 While a cassette is stopped press the ANYKEY button 2 Press the A V buttons to select End Search then press the VCR ENTER button Go to Zero The VCR will fast forward searching for a blank position and then automatically stop at that position Reverse Intro Scan If the VCR reaches the end of the tape during end search the Move GiEnter tape will be ejected Forward Reverse Intro Scan Use scan and play when you don t know exactly where a program is located on a cassette tape 1 While a cassette is stopped press the ANYKEY button 2 Press the A V buttons to select Forward Intro Scan or 9 VCR Reverse Intro Scan then press the ENTER button When an Go to Zero Index mark is found the DVD Recorder amp VCR will playback the tape for 5 seconds after which it will continue searching for the Reverse Intro Scan next Index mark Move Enter 56_ playback This section explains various DVD recording methods This unit can record on various types of discs Before recording read the following instructions ana select the disc type according to your prefer
104. s to be finalized before it can be played back on external devices DVD RW DVD R DVD R 12 00 A 1 With the unit in Stop mode press the MENU button 2 Press the A V buttons to select Disc Setting then press the nie Name ENTER button 3 Press the A V button to select Disc Finalize then press the goratu O u i ENTER button You will be prompted with the message Do you want to finalize this disc 4 Press the lt buttons to select Finalize then press the ENTER button You will be prompted again with the message Disc will be finalized Do you want to continue 5 Press the lt gt buttons to select OK then press the ENTER button The disc is finalized Disc Finalize Finalize 2 Once disc is finalized you cannot delete titles from the record list Once a DVD R DVD RW video mode disc is finalized it is playable in a standard DVD player Depending on the disc type the displayed screen may be different Finalizing time may be different depending on the amount of data recorded on the disc Data the disc will be damaged if the recorder is powered off during the finalization process You can automatically finalize a disc using EZ REC MODE See page 36 Unfinalizing a disc V VR mode 1 With the unit in Stop mode press the MENU button gt Disc Finalize 2 Press the A V buttons to select Disc Setting then press the ier Namo ENTER button 3 Press the A V
105. s you are sure you want to record over the tape 1 Insert a blank VHS tape into the VCR deck e Make sure the tape is long enough to record the entire program 2 Press CH or INPUT SEL button repeatedly to select the channel or input source you want to record e When using the set top cable box or satellite receiver control select the channel by pressing CH or number buttons and SET on this recorder s remote control The recorder s input is switched to the connected input AV1 or AV2 e When not using the set top cable box or satellite receiver control select the connected input AV1 or AV2 by pressing INPUT SEL button and then select the channel on the Set top cable box or satellite receiver 3 Press the REC SPEED button on the remote control to set the Record Speed to one of the following options ONIdQHOO3H e SP Standard Play for best picture quality e EP Extended Play for maximum recording time 3 times SP 2 The selected Record Speed will appear on the front panel and have on screen displays Maximum Recording Time SP vs EP Tape Length SP Standard Play EP Extended Play 1 120 Approx 2 hrs Approx 6 hrs 1 160 Approx 2hrs 40 mins Approx 8 hrs 1 180 Approx 3 hrs Approx 9 hrs 3 When you watch or record on the VCR during DVD Recording some function buttons may not operate The message This function is not available will be displayed 4 Press the REC button on the remote c
106. sc Step 4 Playing To start playback select the title you want to play from the title list A DVD consists of sections called titles and sub sections called chapters During recording a title is created between two points where you start and stop recording Chapters will be created automatically regardless of the disc type when it is set at the setup menu Step 5 Editing a recorded disc Editing on discs is easier than conventional video tapes The recorder supports many different edit functions possible only with DVDs With a simple and easy edit menu you can operate various edit functions such as delete dubbing rename lock etc on a recorded title 12 getting started Creating a playlist DVD RAM RW R in VR mode With this recorder you can create edit a new playlist on the same disc without changing the original recording Step 6 Finalizing amp Playing on other DVD components To play your DVD on other DVD players finalizing may be necessary First finish all editing and recording operations then finalize the disc When using a DVD RW R disc in VR Mode Although finalizing is generally unnecessary when playing the disc on a VR Mode compatible component a finalized disc should be used for playback When using a DVD RW R disc in Video Mode The disc should be finalized first to enable playback on anything other than this recorder No more editing or recording can be made on the disc once it ha
107. sc or you want to edit the disc after recording select a rewritable DVD RW or DVD RAM type disc If you want to save a recording without making any changes choose a non rewritable DVD R DVD ReWritable DVD R Step 2 Format the disc to start recording Unlike a VCH the recorder automatically starts formatting when an unused disc is inserted Using a DVD RAM RW R When an unused DVD RAM RW R disc is first inserted the message Unformatted Disc Formatting Please wait will be displayed Using a DVD R It is not necessary to format a new DVD R disc When it is inserted it will operate in Video mode It can also be formatted in VR mode in the setup menu You can change the disc mode only once when an unused DVD R disc is inserted 2 You only use either the VR or Video mode on a DVD RW R but not both at the same time You can format a DVD RW R to V or VR mode using disc setting It should be noted that the disc s data will be lost when changing formats Step 3 Recording There are two different recording methods Direct Recording recording a program you are currently watching and Timer Recording Timer recording is classified as follows Recording mode HQ high quality mode HSP SP standard quality mode LSP ESP LP EP SLP Long duration mode according to the recording mode When recording is set in the AUTO mode the best quality picture is recorded with regards to the remaining time on the di
108. setup Resolution HDMI Video HDMI Black Level Picture Control Standard Progressive On Enter C Return Resolution HDMI This setting is used when the unit is connected by HDMI or DVI to Display devices TV Monitor etc e 480p 720 x 480p jw M 20p 1280 X 720p Title List TV Type 4 3 Letter Box e 1080i 1920 x 1080 pm ee ideo HDMI e 1080p 1920 x 1080p Edit Black Level Dubbing Picture Control Progressive e AUTO It will be set to the possible maximum resolution supported by the TV e Connect the DVD VR375 to your TV via HDMI or DVI Set your TV s input to HDMI or DVI 480p 720p 10801 1080p 7 If the DVD Recorder is connected to your TV with Component cables no HDMI DVI cable connected the output resolution mode toggles between 480p 480i You can also watch VCR output through HDMI Video is upscaled to a maximum 1080p Disc Setting Zt Setup Move Enter N Return Video HDMI Selects the type of output from the HDMI OUT jack Wb Video my a e YCbCr Normally select this when connecting to an HDMI Title List TV Type 4 3 Letter Box d Timer Resolution HDMI Auto Su e RGB Gives brighter colors and deeper black Wasa on M Dubbing Picture Control Standard Select this if colors are weak ee Disc Progressive On Setting Move Enter Return Black Level Adjusts the black level of the screen
109. t Selects audio options for signals output from the DIGITAL AUDIO S nn Tite Li ee Downmix Dolby Surround The following setup items switch the method of outputting audio MUR signals when you connect a component such as an amplifier Dubbing Sean Audio ion receiver with a digital input jack For connection details see AV eoe Bi Setting DVID8 Audio Input Stereo1 Receiver Connections on page 25 LE Setup AV Audio TE Move Enter Return 2 f you connect a component that does not accept the selected audio No Disc Digital Ou signal a loud noise or no sound will come out from the speakers and may Title List affect your ears or cause speaker damage a Edit Dubbing Disc Setting tt Setup Move Enter C Return 32 system setup Dolby Digital DVDs only Selects the type of Dolby Digital signal e D PCM Select this when the recorder is connected to an audio component that does not have a built in Dolby Digital decoder e Dolby Digital Select this when the recorder is connected to an audio component with a built in Dolby Digital decoder DTS DVD VIDEOs only oelects whether or not to output DTS signals e e On Select this when the recorder is connected to an audio component with a built in DTS decoder e Off Select this when the recorder is connected to an audio component without a built in L decoder m
110. tates do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state To obtain warranty hardware service please contact SAMSUNG at Samsung Electronics America Inc 105 Challenger Road Ridgefield Park NJ 07660 0511 1 800 SAMSUNG 726 7864 and www samsung com Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Contact Center Web Site North America ia hina a 3260 SAMSUNG 0 15 Min en 01805 SAMSUNG 726 7864 0 14 Min Europe KYRGYZSTAN 1 00 800 500 55 5O0 a ee CIS TADJIKISTAN 198 10 800 500 55 500 00 00 0800 SAMSUNG 0800 726 786 Asia Pacific TURKEY 444 77 11 Middle Fast SOUTH AFRICA 0860 SAMSUNG 726 7864 800 SAMSUNG 726 7864 8000 4726 HEADQUARTERS 105 Challenger Road Ridgefield Park N J 07660 051 1 TEL 1 800 SAMSUNG SERVICE DIVISION 400 Valley Road Suite 201 Mount Arlington NJ 07856 1 800 SAMSUNG 726 7864 www samsung com Code No AK68 01613A 01
111. th the confirmation message Do you want to erase all title lists e When Protected Title exists The Erase All Titles function will not operate If there is a title containing a still picture however that function will not operate If you want to delete a protected title disable Protect for it on the Lock item 3 Press the lt buttons to select OK then press the ENTER button All title lists are deleted Disc Setting 12 00 AM Title List Disc Name Do you want to erase all the titles Cancel 9 Enter Return English _79 reference eee TROUBLESHOOTING DVD VIDEO DVD RAM DVD RW DVD R If your product malfunctions go through the check points below before contacting Samsung customer service PROBLEM EXPLANATION SOLUTION No power e Check whether the power cord is securely plugged into the power outlet e Did you press the power button of your DVD Recorder amp VCR The input is displayed for a while when the MM e The DVD Recorder amp VCR requires some time to initialize after it is turned on power turns on Cannot record TV programs e Check whether the power cord is securely plugged into the power outlet e Did you set the DVD Recorder amp VCR channel settings correctly e Check the free space on your DVD RAM DVD RW DVD R disc Timer recording does not work properly e Check the recording time end time and current time settings again e Recording will be canc
112. the DVD recorder amp VCR is recording it can t be powered off dNLAS IN3ISAS e f you change from HDMI to other sources Composite Component RF etc on the TV while playing a DVD disc the DVD Recorder amp VCR will stop playing The DVD Recorder amp VCR may keep playing certain discs based on their content Language Follow This sets the menu language of external devices connected to a No Disc Features Samsung TV using Anynet so they match the language setting of Tie List DVD Auto Chapter 5 Min the TV To activate this Anynet HDMI CEC must be set to On ee e On a Edit vCR Function Off Dubbing Set Top Box Control pise Anynet HDMI CEC On Setting Move Enter N Return SETTING UP THE OPTIONS Language If you set the language options in advance they will come up automatically every time you watch a movie 1 With the unit in Stop mode press the MENU button 2 Press the A V buttons to select Setup then press the ENTER No isc Language 12 00 AM button 3 Press the A V buttons to select Options then press the ENTER ac veh w ne button Edit subtitle Auto 4 Press the A V buttons to select Language then press the Dec ENTER button 2 Move Enter N Return Language setup menu will be displayed b Press the A V buttons to select the desired language option then press the ENTER button e OSD For the on screen menu of your DVD Recorder amp VCR e
113. to record onto a disc from a camcorder that has a DV output jack 1 Connect the DV output jack of your camcorder to the DV input jack on the front of your DVD Recorder amp VCR using a DV cable 2 Power on your DVD Recorder amp VCR and switch to DV mode by pressing the INPUT SEL button on the remote control 3 Press the REC SPEED button repeatedly to select the recording opeed quality HQ HSP SP LSP ESP zu LP EP SLP Move Enter 4 If the input is set to DV a playback record menu that enables camcorder control appears on the top of the screen 5 Select the Playback related icons on the upper part of the screen to playback the camcorder and find the starting position for dubbing 6 To start recording Press the lt gt buttons to select REC 6 icon on the top side of the screen then press the ENTER button You can press the REC button on the remote control to start recording 7 Press the STOP button on your DVD Recorder amp VCR when the recording is finished 34 Some camcorders may not work with your DVD Recorder amp VCR even if they have a DV output jack Also refer to the user manual for your camcorder when recording through a DV jack o display playback related icons on the screen press any direction button on the remote control You cannot dub from a camcorder onto a videotape through the DV Input jack on this unit English 61 recording MAKING A ONE TOUCH RECORDING O
114. to solve the problem after reading the above instructions note e The model and serial number on the rear of your DVD Recorder amp VCR e The warranty information A clear description of the problem Then contact SAMSUNG customer service at 1 800 SAMSUNG 82 reference PROBLEMS AND SOLUTIONS DISPLAY ERROR MESSAGE Before contacting a Samsung authorized service center perform the following simple checks PROBLEM EXPLANATION SOLUTION You cannot record a copy protected movie e You can t record the video since it is protected by copyright You cannot record This disc is protected This disc cannot be formatted the disc is protected This disc cannot be renamed the disc is protected e he disc you are using is protected To record on this disc or use this function cancel the disc protection function Refer to page 76 J9N343339 e This disc cannot be finalized the disc is protected This Menu is not available the disc is protected The disc cannot be played Please check the The disc does not match the regional code for your area and cannot be played on regional code of the disc this device This disc cannot be formatted Please check the disc You could not format the disc because of error detection e Make sure there are no scratches or dirt on the disc You could not finalize the disc because of error detection You could not unfinalize the disc because of error detection EL
115. ton to confirm the edited setting l l l Enter N Return ERASING THE TIMER LIST Follow these directions to erase a title from the timer record list 1 Press the MENU button 2 Press the A V button to select Timer then press the ENTER button 3 Press the A V button to select Timer List then press the ENTER button 9 Timer List Do you want to erase No 01 OK 4 Press the A V button to select the number of the scheduled record list you want to erase and then press the ENTER button e he Edit and Erase items are displayed 5 Press the A V button to select erase then press the ENTER or gt button e You will be prompted with a delete confirm message such as Do you want to erase No 01 6 Press the lt P buttons to select OK then press the ENTER button e he selected title will be erased from the list sS gt 1 Enter NReturn 34 m You can not delete programs that are currently being recorded 64 recording BASIC VCR RECORDING Before starting Check the remaining time on the tape You can record a TV show in progress by inserting a blank tape and pressing the REC button You can even add time in preset increments up to 4 hours by pressing the REC button repeatedly 2 sure your videotape has a Record Safety Tab If the tab is missing you can cover the opening with a small piece of tape Warning Do not cover this opening unles
116. ton to select Yes then press the ENTER button mes es You can listen to the music while watching the photo Enter Return 34 To operate this function you have to select the disc containing both music files and photo file PLAYING BACK A VHS TAPE VCR 1 Insert a standard VHS tape into the VCR deck e When a videotape is inserted power will turn on automatically 2 Press the PLAY button on the remote control or on the front panel of the unit CQ D The videotape will begin to play automatically if the Record Safety Tab is removed and Auto Play is turned on tue Press the STOP button on the remote control or on the front panel of the unit Record safety Tab Tracking The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks During playback press the TRK CBC CH TV CH V A buttons to remove white lines from the picture Special VCR Playback Features While a videotape is playing you can enjoy a variety of special playback features Pause In Play mode press PAUSE button to pause a single frame Frame Advance In the Pause mode press F ADV SKIP button to advance to the next frame FPS Review In Play mode press Forward button or Rewind button to FPS RPS at two speeds e Picture Search Press and release repeatedly to advance the tape forward or backward at 2 3 5 7 times normal spee
117. trol part of another manufacturer s TV functions with this remote control e Buttons that can be controlled on your TV TV POWER INPUT SEL TV VOL TRK CBC CH TV CH A V TV MUTE 0 9 TV 100 SET Button To determine whether your television is compatible follow the instructions below 1 Switch your television on 2 Point the remote control towards the television 3 Press and hold the TV button and enter the two figure code simultaneously corresponding to the brand of your television by pressing the appropriate number buttons BRAND CODES BRAND CODES SAMSUNG 01 14 15 23 31 NEWSAN 27 DAEWOO 19 NOBLEX 25 EMERSON 21 PANASONIC 12 24 GRADIENTE 30 RCA 07 29 HITACHI 10 SANYO 05 20 JVC 11 SHARP 02 16 22 LG 06 08 18 SONY 03 LOEWE 28 TELEFUNKEN 26 MAGNAVOX 04 TOSHIBA 09 MITSUBISHI 19 ZENITH 17 Result If your television is compatible with the remote control it will switch off It s now programmed to operate with the remote control f several codes are indicated for your television brand try each one in turn until you find one that works If you replace the remote control s batteries you must set the brand code again You can then control the television using the following buttons Button Function TV POWER Used to switch the television on and off INPUT SEL Used to select an external source TV VOL Used to adjust the volume of the television TRK CBC CH TV CH A V Used to select the desired channel TV
118. y connect your DVD Recorder amp VCR directly to your TV not to a VCR Connecting your recorder to a VCR results in a distorted picture from copy protected DVD discs his product incorporates copyright protection technology that is protected by methods claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited GALYVLS 9NILI3O e Protection e Program protection See page 70 Locking a Title e Disc protection See page 76 Disc Protection DVD RAM DVD RW DVD amp R discs that are incompatible with the DVD VIDEO format cannot be played with this product For more information on DVD recording compatibility consult your DVD RAM DVD RW DVD R manufacturer Use of poor quality DVD RAM DVDxRW DVD R discs may cause the following unexpected problems including recording failure loss of recorded or edited materials or damage to the recorder Do not use the following discs e D CD G CD I CD ROM and DVD ROM Divx discs should not be used in this product Note e Some commercial discs and DVD discs purchased outside your region may not be playable with this product When these discs are played eith

User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents