Home

Manual

1. No condensation allowed Adapter case 40 W x 100 D x 25 H mm Protrusions excluded Dimensions Interface cable length 100 mm User interface connector excluded Weight 55g The maximum and minimum voltages depends on the MCU used For details contact the Fujitsu sales or support representative 2 The power consumption by the MCU used is not included 3 The connector part number is given below FAS 1001 2101 0BF YAMAICHI ELECTRONICS Co Ltd EM USB Line Specifications Table 2 lists the USB line specifications of the adapter Table 2 USB Line Specifications Item Description Conforming standard USB1 1 Communication method Full Speed Bulk Transfer Data transfer rate 12Mbps Connector shape Series B Power supply BUS Powered E Tool Reset Specifications A tool reset is a hardware reset by the adapter to reset the entire system of the MCU including the BDSU module on the user system When both of the adapter power and MCU s user power are turned on the tool reset is canceled au tomatically to enable the MCU to be evaluated The following shows how to generate a tool reset and how long it remains in effect e Tool reset generation methods and reset L pulse width 1 Set the MCU user power from OFF to ON power on reset The reset remains in effect for about 16 to 70 ms after the MCU user power is supplied 2 Set the adapter power from OFF to ON by unplugging an
2. PERFORM The following document contains information on Cypress products Although the document is marked with the name Spansion and Fujitsu the company that originally developed the specification Cypress will continue to offer these products to new and existing customers Continuity of Specifications There is no change to this document as a result of offering the device as a Cypress product Any changes that have been made are the result of normal document improvements and are noted in the document history page where supported Future revisions will occur when appropriate and changes will be noted in a document history page Continuity of Ordering Part Numbers Cypress continues to support existing part numbers To order these products please use only the Ordering Part Numbers listed in this document For More Information Please contact your local sales office for additional information about Cypress products and solutions About Cypress Cypress NASDAQ CY delivers high performance high quality solutions at the heart of today s most advanced embedded systems from automotive industrial and networking platforms to highly interactive consumer and mobile devices With a broad differentiated product portfolio that includes NOR flash memories F RAM and SRAM Traveo microcontrollers the industry s only PSoC programmable system on chip solutions analog and PMIC Power Management ICs CapSense capacitive touch sen
3. Damage Before moving the product be sure to turn off all the power supplies and unplug the cables Watch your steps when carrying the product Do not use the product at an unstable location such as a place exposed to strong vibration or a sloping surface Doing so may let the product fall resulting in an injury or fault Neither put anything on or apply shock to the product Once the product has been powered do not carry it Doing either may cause a fault due to a load or shock Damage Since the product contains many electronic components keep it away from direct sunlight high temperature and high humidity to prevent condensation Do not use or store the product where it is exposed to much dust or a strong magnetic or elec tric field for an extended period of time An adverse operating or storage environment can cause a fault Damage Use the product within the ranges of its general specifications Please look at 4 Specifications about the use range Operating it outside the range of any general specification may cause a fault Damage To prevent electrostatic breakdown do not let your finger or an object touch any metal part of the connector Before handling the product touch a metal object such as a door knob to discharge static electricity from your body Damage When turning the power on or off follow the relevant procedure described in this document Before turning the power on in particular be s
4. MCU in the User power supply input Connected to the MCU s Vcc pin Input output column in the table indicates the BGM adapter and Evaluation MCU respectively Table 4 Adapter Interface Connector Pinout USB programmer Input output BGMA lt MCU Evaluation MCU connection terminal Function User power supply input Remarks Connected to the MCU s Vcc pin Vss Connected to the MCU s Vss pin BGMA gt MCU Tool reset output BDSU Initialization of user s logic Mode change output Not used Not connected BGMA lt MCU Serial data input SD for UART BGMA gt MCU Synchronous clock output Base clock for UART BGMA gt MCU Serial data output RD for UART Not used Not connected Vss Connected to the MCU s Vss pin BGMA lt MCU User power supply input Connected to the MCU s Vcc pin BGMA and MCU in the Input output column in the table indicates the BGM adapter and Evaluation MCU respectively 2 Please refer to each MCU specifications for the serial port number that corresponds to the serial interface for the USB programmer Table 5 Recommended Adapter Interface Connectors Part number FAP 1001 2202 0BS Specifications Manufacturer Right angle solder dip Housing providedMiddle latch provided FAP 1001 2204 0BS Straight solder dip Housing providedMiddle latc
5. d plugging the USB cable The reset remain in effect for about 32 to 140 ms after the adapter power is supplied If the user system and adapter cause an uncontrollable error but the system cannot be recovered by tool reset generation method 1 execute tool reset generation method 2 E Adapter Interface Specifications Table 3 is a pinout of the adapter interface connector mounted on the user system Table 5 lists rec ommended connectors Figure 7 shows the connector pins When the adapter interface connector is installed on the user system connect the adapter interface connector to the MCU according to the following specifications Connector pin No Table 3 Adapter Interface Connector Pinout emulator system Input output BGMA lt MCU Evaluation MCU connection terminal UVCC Function User power supply input Remarks Connected to the MCU s Vcc pin GND Vss Connected to the MCU s Vss pin BGMA gt MCU TRESETX Tool reset output BDSU Initialization of user s logic BGMA gt MCU DMDX Mode change output 0 Debug mode 1 Free run mode BGMA lt MCU SOUT Serial data input SD for UART BGMA lt MCU EXC External clock input Base clock for UART BGMA gt MCU SIN Serial data output RD for UART N C Not used Vss Not connected Connected to the MCU s Vss pin Connector pin No BGMA lt MCU BGMA and
6. h provided YAMAICHI ELECTRONICS FAP 10 08 2 0BS Right angle solder dip Housing providedLatch not provided Co Ltd FAP 10 08 4 0BS EM Options Straight solder dip Housing providedLatch not provided Index mark _ apin Y 1pin 10pin 2pin TOP VIEW Figure 7 Adapter Interface Connector Pins Various options are available to the adapter Purchase them as required See Table 6 for the options Table 6 Options The part number depends on the MCU used For details contact the Fujitsu sales or support representative SS01 00022 2E FUJITSU SEMICONDUCTOR e SUPPORT SYSTEM F2MC Series BGM ADAPTER MB21 46 09 OPERATION MANUAL February 2005 the second edition Published FUJITSU LIMITED Electronic Devices Edited Business Promotion Dept co FUJITSU
7. ill not be liable against you and or any third party for any claims or damages arising in connection with above mentioned uses of the products Any semiconductor devices have an inherent chance of failure You must protect against injury damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy fire pro tection and prevention of over current levels and other abnormal operating conditions If any products described in this document represent goods or technologies subject to certain restrictions on export un der the Foreign Exchange and Foreign Trade Law of Japan the prior authorization by Japanese government will be required for export of those products from Japan 2005 FUJITSU LIMITED Printed in Japan 1 Checking the Delivered Product Before using the product make sure that your package contains the following items e BGM adapter 1 e USB cable 2 0 m 1 e Operation manual Japanese version 1 1 e Operation manual English version This document Hereafter called the adapter 2 Appearance and Part Names Figures 1 and 2 show the adapter appearance major dimensions and part names POWER LED User interface connector USB connector be Interface cable 100 mm 100 mm Figure 1 Adapter Appearance Top view 25 mm Figure 2 Adapter Appearance Front view 3 Connecting the Adapter M S
8. oever arising out of the use of the infor mation e Any information in this document including descriptions of function and schematic diagrams shall not be construed as license of the use or exercise of any intellectual property right such as patent right or copyright or any other right of FUJITSU or any third party or does FUJITSU warrant non infringement of any third party s intellectual property right or other right by using such information FUJITSU assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein e The products described in this document are designed developed and manufactured as contemplated for general use including without limitation ordinary industrial use general office use personal use and household use but are not designed developed and manufactured as contemplated 1 for use accompanying fatal risks or dangers that unless extremely high safety is secured could have a serious effect to the public and could lead directly to death personal injury severe physical damage or other loss i e nuclear reaction control in nuclear facility aircraft flight control air traffic control mass transport control medical life support system missile launch control in weapon system or 2 for use requiring extremely high reliability i e submersible repeater and artificial satellite Please note that FUJITSU w
9. sing controllers and Wireless BLE Bluetooth Low Energy and USB connectivity solutions Cypress is committed to providing its customers worldwide with consistent innovation best in class support and exceptional system value FUJITSU SEMICONDUCTOR SUPPORT SYSTEM SS01 00022 2E F2MC Series BGM ADAPTER MB2146 09 OPERATION MANUAL co FUJITSU PREFACE Thank you for purchasing the F7MC series BGM adapter model number MB2146 09 The product is a development support tool for developing and evaluating applied products which use Fujitsu microcontrollers hereafter MCUs incorporating BDSU modules This manual describes how to handle the F7MC series BGM adapter Be sure to read it before using the product For information on the MCUs supported by this product contact the Fujitsu sales or support repre sentative FMC is the abbreviation used for FUJITSU Flexible MICRO CONTROLLER E For Your Safety This manual contains important information required for using the product safely Be sure to read through the manual before using the product and follow the instructions contained therein to use it correctly In particular carefully read Caution of the products described in this manual at the beginning of this manual to understand the requirements for safe use of the product before using it After reading the manual keep it handy for future reference EM Warranty and Liability The specifications of the product are s
10. the user system Plug the user interface connector of the adapter into the adapter interface connector on the user sys tem When plugging the user interface connector align its index mark pin No 1 with the adapter inter face connectors counterpart For the specifications of the adapter interface connector see Adapter Interface Specifications in Section 4 Specifications Figure 6 shows how to connect the adapter to the user system Adapter interface connector on the user system User interface connector kT Index mark pin No 1 Adapter User system Figure 6 Conneciing to the User System 4 Specifications E General Specifications Table 1 lists the general specifications of the adapter Table 1 General Specifications Item Specification Name F MC series BGM adapter Model number MB2146 09 Adapter power input Max 50 mA USB BUS power used Power supply specifications User power input 2 7 V to 5 5 V Max 20 mA Green On when only adapter power is supplied with the USB cable connected POWER LED indication Red On when only user power is supplied Orange On when both adapter power and user power are supplied User interface connector 3 MIL standard compliant key type with the center key Operating temperature humidity 5 to 35 C 20to80 No condensation allowed Storage temperature humidity 0 to 70 C 20 to 80
11. ubject to change without notice Fujitsu assumes no liability for any loss or damage whatsoever directly or indirectly arising out of the use of the product M Related Manuals You should refer to the following manuals as well HARDWARE MANUAL for each type of microcontroller DATA SHEET for each type of microcontroller SOFTUNE Workbench OPERATION MANUAL SOFTUNE Workbench USER S MANUAL SOFTUNE Workbench COMMAND REFERENCE MANUAL EM Caution of the products described in this document The following precautions apply to the product described in this manual Indicates a potentially hazardous situation which if not avoided appropriately Z N WARNING could result in death or serious injury and or a fault in the user s system Electric shock Before performing any operation described in this manual turn off all the power Damage cause an electric shock or device fault supplies to the system Performing such an operation with the power on may Electric shock Once the product has been turned on do not touch any metal part of it Damage Doing so may cause an electric shock or device fault N CAUTION Indicates a potentially hazardous situation which if not avoided appropriately may result in minor or moderate injury and or damage to the product or the equipment to which the product is connected to software resources such as data or to other properties Cuts Damage
12. ure to finish making all the required connections To set up and use the product follow the instructions given in this document Using the product incorrectly or inappropriately may cause a fault Damage Before plugging or unplugging any cable for this product be sure to turn the power supply off When unplugging the cable remove it while holding the connector with out pulling the cable itself Pulling the cable itself or bending it may expose or dis connect the cable core resulting in a fault Damage When stored the product should be kept in its packaging box as it has no housing Re transporting the product may damage it to cause a fault Keep the packaging materials used for shipment of the product and use them when re transporting it e The contents of this document are subject to change without notice Customers are advised to consult with FUJITSU sales representatives before ordering e The information such as descriptions of function and application circuit examples in this document are presented sole ly for the purpose of reference to show examples of operations and uses of FUJITSU semiconductor device FUJITSU does not warrant proper operation of the device with respect to use based on such information When you develop equipment incorporating the device based on such information you must assume any responsibility arising out of such use of the information FUJITSU assumes no liability for any damages whats
13. ystem Configuration emulator system Connect the adapter between the host machine and the user system so that the adapter can serve as an emulator under control of the host machine For using emulator debugger software on the host machine refer to the SOFTUNE Workbench OPERATION MANUAL Figure 3 shows the system configuration User Adapter Host Adapter interface interface machine connector Connector User system 1 USB cable 2 Interface cable adapter s flat cable Figure 3 System Configuration emulator system M System Configuration USB programmer The adapter connects the host machine and the serial interface of MCU with built in flash memory made by Fujitsu and writes data in a built in flash memory For information on the USB programmer contact the Fujitsu sales or support representative Figure 4 shows the system configuration MCU with Host User Adapter built in flash 9S Adapter interface interface memory machina connector connector made by Fujitsu User system 1 USB cable 2 Interface cable adapter s flat cable Figure 4 System Configuration USB programmer E Connection to the Host Machine Connect the adapter to the host machine using the USB cable Figure 5 shows how to plug the USB cable EOP g Connection to the USB connector of the adapter Adapter Figure 5 Plugging the USB Cable M Connection to the User System Connect the adapter to

Manual

Contents

Download Pdf Manuals

Related Search

Related Contents