Swing Auger Mover User`s Manual
Contents
1. KRAMBLE INDUSTRIES INC Remote Control Swing Auger Mover Installation and Operating Manual The Remote Control Swing Auger Mover is designed to provide the ultimate in convenience and safety to perform tasks remotely It is a radio frequency RF controlled device that allows operation of a motor gate chute etc from a hand held transmitter operated remotely The Transmitter which operates at 916 MHz FM transmits encoded information to the Receiver which then decodes the information and performs the desired function When coupled with the electromechanical driver this system may be used to operate a motor opena swinging gate close a chute turn a valve etc The Transmitter and Receiver are designed to operate within 300 but actual range is dependent on operating environment Features Simplicity of design and quality of engineering Power On Off switch on Receiver Console Direction Control switch on Console LED Indicator lights Oy Transmitter Battery Ease of installation removal when not in use All controls can be by either Manual Switch or Remote Control Multiple Transmitters can operate a single Receiver Multiple Receivers can be operated by a single Transmitter Receivers are Channel selectable Optional Auxiliary 12VDC output for remote controlled light or other device Table of Contents Specinicati ons are C H 2 iac acces chee Ss nea ae a ae A A ee hea Ge a 3 I IE AO2. DEDERE 3 Installation Instructions oor ete tte nh eee Ete Th e Ran Saee e XR eves eA ERE e Ee e ERE AER ERE Nee e eR eese RE Reno 4 Mechanical Installation isecen ER tex POENI eee is ERR Ee xta es Du IS E en id 4 Electric Cylinder Iristallation ee ee deed enero tree dead ed nene AAE 5 General Operation 5 rete od iode tea ee recto opts teed euet oss ue ea eerta cosine Oye p roe etes 9 Control Console nitis a n t tt ere On TR ih re e pe re eate ed Eo ee eel ein ieee 9 Auxiliary Output option nnne enne nsns 9 Transmitter Receiver Matching ccccccscesssssssssscscscssseecseecseecaecsaecsaeceaeceassesesseeeseessesessseseauesaeeaaes 10 Channel Select Settings Ly RUE RR cider Le HI E een La ceu Qu a ead ea et LA e Pu a ROG 11 Transmitter odere ette e ete D te e end de n atra e e dite t er te 11 Transport Winch option net detti e e t tne tt t e tici deae twas 12 Fu ll Bin Alarm option 244 mte t tret ee ee ee eet 13 Mechanical Installation 6 ee e o oka ELTERN RE ERR a ERA XU a dE PARE OR ees 14 SONSOP Probe lest Em 14 Electrical Installation oro eoe to teh e Fi ene RR c aae RE Ye ERR Id cdvanesscoteeessaatease 14 Sensor Probe k EA OR a RU re i eet m RR e cete te eov tu me Eae e vt i 14 General Operation rne cete n en treten en asser eene cedere esae Coase ape e auae 15 Receiver Console d ge A bete Ee utut tates ti d quete fe ede estt ea ee eee Ede 15 Limited TET IED
3. Revision 1 Swing Auger Mover Page 7 Figure 4 Underside of Case Diagram 12V dc POWER SWING WINCH A B 4a B gt s ersparen View from underside of case Connect the 6 Console Swing cable 14 Console Winch cable and the 9 Console Power cable to the terminal block on the underside of the Swing Auger Mover Console using the lock washers and 20 nuts supplied Attach the Swing Auger Mover Console at a convenient height on the swing auger tube using the gear type clamps provided through the console holes Install the 12 Tractor Power cable onto the 12V tractor battery terminals using the pre crimped 3 8 ring terminals and the 80A self resetting fuse assembly included The fuse assembly must be installed between the positive battery terminal and the Red conductor of the 12 Tractor Power cable to protect against the possibility of a short circuit Be sure to install the fuse assembly observing the correct polarity as indicated by the engraved BATT label on the aluminum fuse bar Install the Transport Winch and connect the 14 Console Winch cable onto to the winch motor terminals using the pre crimped ring terminals Connect the 6 Console Swing cable to the Swing Auger Mover wheel assembly motor cable The polarity for the Swing A B and the Winch A B terminals will reverse during normal operation If the Wheel Drive is running in the wrong direction when operated exchange the Swing A and B wires Similarly if
4. separating the two halves of the assembly The circuit board and battery are mounted on the black sensor mounting plate With the battery attached hold the WHITE test button on the circuit board until the yellow LED lights up If the yellow LED begins flashing the battery is low and needs to be replaced If the yellow LED stays on the battery is good and it is always on while self testing To test the threshold angle the red LED will light up when the circuit board is tilted beyond the threshold To exit test mode hold the button again until the yellow LED remains off The Full Bin Alarm Sensor Probe will not transmit a signal while in test mode Ensure that the LEDs are not lit before reassembling the sensor Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 17 RF Security As with the handheld transmitter the sensor probe contains its own unique security code that is matched to the receiver at the factory Sensor Angle Setup The FBA Sensor utilizes a 3 axis accelerometer to determine its angle with respect to the ground The trip angle of the sensor at which it transmits the signal to activate the alarm light and horn is preset to
5. the Winch is running in the wrong direction when operated exchange the Winch A and B wires Connect the 9 Console Power cable to the 12 Tractor Power cable Secure cables to the swing auger tube using the supplied gear type clamps as shown WARNING DO NOT CONNECT THE TRACTOR POWER CABLES TO THE CONTROL CONSOLE OUTPUT TERMINALS AS AN ELECTRICAL SHORT AND SERIOUS DAMAGE OR INJURY COULD RESULT Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 8 Figure 5 Console Diagram Audible 95dB Alarm optional LED Visible Alarm optional Master Power PUSH to operate Gear Type Clamp location Indicator LEDs Power red Power On System Ready Receive Learn yellow Data Safetu Convenience Reliability receiving from transmitter system in learn mode FBA Power PUSH to operate Indicator LEDs FBA POWER Red Power Indicator LEDs Output On FBA Ready Green Power to motor fault states indicator slow blink for low battery and fast blink for high temperature FBA Cancel PUSH to silence alarm Learn Control Hold during powerup to match to a transmitter Transport Winch Direction Control M
6. tight Make sure that the tractor battery is fully charged and the engine is running If a control circuit high temperature status occurs the green Fault States Indicator will flash rapidly blinking approximately four times per second Allow the unit to cool before resuming operation Each Swing Auger Mover has its own RF receiver located in the control console which is channel selectable to operate in multi component environments e g remote control trailer chutes on Channels 1 amp 2 and the Swing Auger Mover on Channel 3 The user can select the desired channel using the 2 position dip switch All Swing Auger Movers are set to Channel 1 at the factory Auxiliary Output option The Control Console Auxiliary Output provides a remote control power output capable of delivering 10A 120 watts This feature is intended for the operation of a remote control light for illuminating the work area when approaching at night or for operation of a camera or other device The output can be activated and deactivated from the transmitter by pressing the centre button on the RF transmitter marked AUX or from the Control Console by pressing the two Aux control buttons on the face of the Control Console simultaneously The auxiliary output is protected by a thermal fuse that automatically resets when cooled The auxiliary output is automatically shut off when the fuse trips to prevent a repeating cycle of the fuse tripping and resetting and must be r
7. 30 degrees tilt at the time of manufacture This angle is programmable and while not normally required may be changed by the customer to optimize the sensor s response in the customer s application There are two steps to set the threshold angle of the probe first set the O degree reference angle Second set the desired threshold angle Do following steps to complete the setup 1 Open the Sensor case by unthreading the top from the bottom 2 Slide the Angle Program Switch shown below in its rightward position to the leftward position c opp 5 8 cy eB Yellow LED i A ae 4 aS ac w N A MI UNI co H Hes J 3 Finda flat surface parallel to the ground and then stand the probe straight up This will be the zero angle reference 4 Press and hold do not release the white self test button until the yellow LED illuminates This stores the zero angle in the probe 5 Tilt the sensor probe to the desired angle and holding the probe steadily release the button This sets the probe s trip angle and you may slide the Angle Program Switch back to the rightward position Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinsta
8. SEERERSAOREISOOOITSERIOSIITLLOOOLTL IO 19 Figure 1 Mechanical Assembly Drawing ecccceeseeeesceceeececeeeeeesaeeeeaceceeeeecsaeeesaaeeeeaeeseaeeeesaeeneaaeeeeeees 4 Figure 2 MOUNTING PositiOn rene ceni ere ne cete eee cuente eren cu e vh eaa E ANSE 5 Figure 3 Cable Diagram eie e ete re ge Le eee dh da yn EDI Ree Ie got dace eue dade be eM Re TEE et 6 Figure 4 Underside of Case Diagram sssssssssssseseseeeeenee eene nnne ener sten nnns sse nnns nennen nnn 7 Fig re 5 Console Diagram i e ccc ers erri ero eee Serre ee etel unde Ra repe qur t ee aparece qur do ee eara eee dur id 8 Figure 6 Receiver Matching eee cene ete ce ep ete eco ev ee etn ento en nana Cana ne de Tae nita cas reus 10 Figure 7 Full Bin Alarm option U Bolt Diagram cccccssccesscesssscsesseceseeecseessaeeseseecseeesssaeesssaeesaes 14 Figure 8 Receiver Console Diagram sse enne nnns en nnns tentes sternere nnnss 15 Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Specifications Transmitter Power Frequency Modulation Indicators Case Size Weight Range Antenna Security Code Safety Functions R
9. anufactured by Superwinch Inc It is imperative for the user to follow all winching instructions as contained in the Superwinch Owner s OWNER S MANUAL Manual INSTALLATION OPERATION MAINTENANCE SAFETY PRECAUTIONS REPAIR PARTS C SERIES 12 Volt DC Electric Winch Models 03001 Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 13 Full Bin Alarm option The integrated Full Bin Alarm FBA is a monitoring system that indicates when the grain level in the bin is reaching its maximum The system consists of a FBA console segment with audible and visible alarms built into the swing auger console and a sensor that hangs into the grain bin suspended from the spout of an auger The battery powered Sensor Probe is fully sealed and communicates wirelessly via radio frequency RF to the Receiver Console When the grain level becomes high enough that the grain comes in contact with the Sensor Probe tilting it beyond 30 for 3 seconds the sensor will send an RF signal that tells the receiver to activate the alarm Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising ou
10. arm signal is both a 2 RED lamp and audible beeper acting simultaneously The green low battery LED illuminates when the sensor sends a Low Battery signal indicating that the Sensor Probe battery requires replacement Once activated the green LED will remain on until the Bin Alarm is powered off The Receiver Console activates the alarm when the alarm signal is received The alarm remains on for ten seconds or until the Cancel button is pressed If the Sensor Probe remains activated the alarm will continue for 60 seconds unless canceled While the alarm is active but has been cancelled the alarm can be reactivated by pressing the Cancel button a second time If ten seconds pass without receiving an alarm signal and the alarm has been cancelled the receiver will automatically reset to normal mode and sound the alarm again should the sensor subsequently transmit the alarm signal Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 16 The Full Bin Alarm power may be turned off independently of the Swing Auger Mover when not in use to prevent undesired operation FBA Receiver Console SELF TEST To test the Receiver Console alarm light and s
11. d be turned Off when not in use to prevent undesired operation Transmitter The Transmitter is powered by a 9V battery which when installed should light the red power light when a switch is pressed If the battery does not exceed 7 volts the Power light will not come On indicating battery replacement is required The Transmitter is also equipped with an OFF Standby switch to prevent accidental operation In the OFF position the transmitter Red LED will not light and the transmitter will not activate even when a function button is pressed To operate slide the switch to STANDBY The transmitter remains off until a function button is pressed at which time the Red LED will light and the transmitter will emit signal No battery power is used when simply in Standby mode with no function buttons pressed Each transmitter contains a unique identifying security code that is transmitted to the receiver during RF operation Up to eight Transmitters can talk to the same Receiver as long as the receiver has learned the transmitters security codes See page 9 for Security Code Matching Instructions To access the battery remove the 4 screws in the back of the Transmitter case and open the case Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of reve
12. eactivated using the transmitter or Console controls The Auxiliary output option includes a 5 foot length of cable to connect the Control Console to the 12V device The polarity is as follows 12V on the WHITE wire and GROUND on the BLACK wire The auxiliary output connector is factory installed at the bottom center of the console case Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 10 Transmitter Receiver Matching The Receiver is matched to a Transmitter by learning the transmitter s unique security code so that the receiver will accept commands from that transmitter A factory default system already has its transmitter matched to the receiver To match a transmitter to a receiver first turn the receiver power switch OFF Hold the button marked LEARN on the receiver and press the receiver power ON then release the two buttons The Receive LEARN light is then lit to indicate that the receiver is waiting for a signal from the transmitter to be learned Press any button on the transmitter to send a signal and the receiver will read the transmitter s security code and store it in memory The Receive LEARN light will flash three time
13. eceiver Power in Power out Standby Power Input Indicators Options Antenna 9 Volt DC Battery 916 MHz FM Power Transmit Red LED 2 5 x 4 2 x 8 25lb 300 depending on environment 1 3 Fixed Mini Tuned Unique in each Transmitter Off Standby Slide Switch 2 to 9 Button depending on model 12 VDC 12 VDC 10 amps max 40mA 4ga 2conductor wire with powerpole connectors Power on red LED Channel active green LED Receive Learn RF Data Yellow LED Multi Channel Operation 1 4 Main Power On Off Switch Manual Switch Control 3 Flexible Tuned Electric Motor Drive Electrical Torque Speed Output Shaft Duty Cycle Overall Size Weight 12vdc 100A Full Load 1125 in Ib 60 rpm no load 4 keyed and drilled 5 4 x 6 x 15 16lb Revision 1 Swing Auger Mover Page 3 FCC This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television rece
14. er Matching Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 11 Channel Select Settings The Swing Auger Mover comes with a 2 position DIP Switch to match the Drive to the desired transmitter channel In multi component environments be sure that each drive is set to a different channel so that devices do not operate simultaneously Select the switch settings as follows Switch 1 Switch 2 Channel 1 OFF OFF Channel 2 ON OFF Channel 3 OFF ON Channel 4 ON ON The Swing Auger Mover and Winch can be operated using the Transmitter or alternatively by operating the UP DOWN momentary switches on the Control Console Whenever the Swing Auger Mover drive or Winch is operated by remote control the Yellow Receive Data LED will be lit along with the Green LED indicating power output to the drive The Swing Auger Mover has two automatically resetting fuses Fuse F1 1 Amp inside the control console is intended to protect the RF receiver and data circuitry and Fuse F2 80 Amp at the battery is intended to protect against a short circuit in the cables These fuses will automatically reset when cooled The Control Console power switch shoul
15. iren hold the Cancel button for four seconds while the Full Bin Alarm is powered on Once tested the alarm will shut off when the Cancel button is released Sensor Probe A nine volt battery powers the Sensor Probe If the battery voltage falls below 6 5 volts the transmitter will transmit a Low Battery signal approximately once per hour which will illuminate the green LED on the receiver to indicate that the Sensor Probe battery needs replacing If the battery voltage falls below 6 0 volts the sensor will be unable to transmit The Sensor Probe contains no external buttons or switches Once the battery is installed it is always active When the Sensor Probe is vertical it is in very low power sleep mode waking every two seconds to check the tilt angle A tilt angle greater than 30 will cause the sensor to remain awake and begin alarm transmission if the angle remains 30 for more than three seconds While active the Sensor Probe sends the alarm signal for a short period every five seconds This is indicated by a blink of the yellow receive LED on the console If the Sensor Probe remains tilted greater than 30 for more than one minute transmission will cease and the Sensor Probe will return to sleep mode Only when the Sensor Probe is returned to the vertical position will it resume normal operation Sensor Self Test To test the battery level and threshold angle of the sensor access the circuit board by unscrewing the top half and
16. llation Revision 1 Swing Auger Mover Page 18 6 Testthe sensor probe by tilting it back and forth to ensure proper operation The red LED should illuminate when the threshold angle of the probe is reached 7 To exit the self test mode hold the white self test button until both yellow and red LED lights go out Before the probe will transmit to the receiver you must EXIT the self test mode 8 To test the probe with the receiver power ON the FBA standalone console Tilt the sensor probe over the threshold angle Within 3 4 seconds the audio and visual alarms should activate Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 19 Limited Warranty Customer satisfaction is a fundamental policy at Kramble Industries Inc All customers can rely upon and expect to receive prompt efficient and courteous service on all Kramble Industries Inc manufactured equipment from each and every employee of the organization Kramble Industries Inc with its office at 102 2750 Faithfull Avenue Saskatoon SK warrants To the Original Purchaser User each product manufactured by Kramble Industries Inc to be free from defective material and workman
17. mage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 4 Figure 1 Mechanical Assembly Drawing Installation Instructions Mechanical Installation The Swing Auger Mover is designed to clamp directly onto the swing auger tube at the lowest point Using the six 7 16 x 2 1 2 bolts provided tighten the clamp around the tube such that the main beam is horizontal when the hopper is on level ground and the auger is at its normal working height Clamps are available for 10 12 13 14 and 16 Augers Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 5 Figure 2 Mounting Position Clamp the Swing Auger Mover Drive at the lowest point possible on the swing auger tube so that on level ground the Main Beam is level without extending the jack and all of the weight is off the inside wheels of hopper There is a grease nipple located on each axle sleeve Grease before first operation and thereafter as needed Electric Cylinder Installation The Swing Auger Mover is provided with pre cut wire le
18. ngths with color coded connectors attached Cable Schedule Tractor Power Cable 12 c w Red Black PowerPole Connector Console Power Cable 9 c w Red Black PowerPole Connector Console Swing Cable 6 c w Black Black PowerPole Connector Console Winch Cable 14 c w Ring Terminals Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 6 Figure 3 Cable Diagram Winch CONTROL CONSOLE Connector Black Black Connector RED BLACK Gear Type Clamps The polarity must be correct as follows 12v on the RED STRIPE wire on the POWER CABLES FROM THE TRACTOR TO THE CONTROL CONSOLE The RED BLACK connector shells MUST MATCH WARNING DO NOT ATTEMPT TO POWER THE CONSOLE OR DRIVE FROM A BATTERY CHARGER ALONE AS DAMAGE MAY OCCUR CONNECT TO A PROPERLY MAINTAINED BATTERY SYSTEM ONLY Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation
19. nue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 12 Transport Winch option The Transport Winch is provided for ease of lifting of the swing auger and hopper to and from the transport position This electric winch operates on 12Vdc power provided through the Control Console and can be operated by manual switch on the Console or by remote control The customer can decide the optimum mounting location and utilization for each application The electric winch may be employed to replace the existing hand crank winch or alternatively to operate in addition to the hand crank winch It is recommended to utilize the auger manufacturer s pulleys and guides provided for the hand crank winch to ensure the swing auger and hopper lifts as designed In addition remove any excess cable so as to reduce the number of cable layers on the winch drum and thus maximize capacity To further increase winch capacity a pulley block and hook can be utilized to effectively double the load capacity To install the winch on the mounting plate provided the customer should unwind the cable to get access to the two mounting holes which are located underneath the drum Unwind the cable until you have enough space to drop a bolt through each hole then screw the nuts on from the bottom EM The Transport Winch option uses a Superwinch C1000 p 12vdc electric winch which provides 5000lb line pull bottom layer m
20. omentary Hold to operate Swing Motor Direction Control Momentary Hold to Operate Auxiliary Output Press both buttons simultaneously to toggle 12V Auxiliary output WINCH DOWN Gear Type Clamp location Auxiliary 12V output optional Entry access for Power and Drive Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 9 General Operation Control Console The Control Console contains the radio Receiver and power control circuits The Control Console is equipped with a Master Power On Off switch on the outside of the case When the switch is ON the Red LED should be lit indicating normal operation Press and release to turn On and Off Each of the Swing Auger Drive and Winch may be operated independently from the Control Console by pressing the desired momentary switch The Green Output LED will come on and the selected device will operate The Control Console also has built in fault status indicators For ease of troubleshooting if a low voltage status occurs to the Control Console the green Fault States Indicator will blink approximately twice per second Check all connections to ensure they are clean and
21. ption which can be determined by turning the equipment OFF and ON the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Industry Canada This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement Kramble Industries Inc 102 2750 Faithfull Ave Saskatoon SK S7K 6M6 306 933 2655 alan kramble net www kramble net Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other da
22. r consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 15 General Operation Receiver Console The Full Bin Alarm Receiver Console is integrated into the front of the Swing Auger Mover console and is equipped with its own Power On Off button and a Cancel Alarm CAN button on the face The Swing Auger Mover must be powered on in order to use the Full Bin Alarm The Full Bin Alarm powers on when the Swing Auger Mover is turned on however the Full Bin Alarm can also be powered off independently of the Swing Auger Mover to prevent undesired operation Figure 8 Receiver Console Diagram FBA Power PUSH to operate Master Power PUSH to operate Indicator LEDs FBA POWER Red Power On FBA Ready LOW BATTERY Green Sensor battery needs replacing Indicator LEDs POWER Red Power On System Ready RECEIVE Yellow Alarm signal receiving from sensor FBA Cancel PUSH to silence alarm The yellow LED indicates that the Console is receiving a valid RF transmission directed to the Bin Alarm In normal operation when the Sensor Probe is tilted more than 30 from vertical it transmits an alarm signal which causes the Yellow receive LED to light for second and the alarm to activate The al
23. s to indicate that the transmitter has been successfully learned and the Receive LEARN light will turn off and receiver will then enter normal operating mode Up to eight transmitters can be learned by a receiver If eight unique transmitters have already been learned by a receiver and it is instructed to learn another transmitter the oldest learned transmitter s security code will be overwritten and forgotten The Full Bin Alarm buzzer and light are disabled for ten seconds after learning a sensor probe s security code in order to prevent unwanted activation of the alarm To erase all stored security codes turn the receiver power ON while holding the LEARN button and continue holding the button until the Receive LEARN light begins to rapidly flash Release the button and the light will flash more slowly for three seconds then turn off to indicate that the erase operation has succeeded If the LEARN button is pressed while the Receive LEARN light is slowly flashing the erase operation is aborted and the receiver retains the stored transmitter security codes The Receiver is equipped with a two position switch to enable or disable the learn and erase functions To enable or disable a function open the case and locate the switch as illustrated below The switches and their positions are labeled on the circuit board Factory default systems are set by default so that the Learn function is Enabled and the Erase function is Disabled Figure 6 Receiv
24. ship under normal use and service for a period of 12 months subject to conditions outlined below The obligation under this warranty is limited to repair or replacement with a similar genuine company part for any part of the product of the company s manufacture that is found to be defective Warranty period begins the day of purchase During the first 1st through the twelfth 12th month Kramble will furnish without charge F O B its plant a similar genuine part to replace any part of a product of the company s manufacture which proves to be defective in normal use and service during this time Labor to install or repair such parts will be absorbed by Kramble Industries Inc If this work is to be done other than Kramble personnel prior approval must be given by Kramble Industries Inc as to rate and time This warranty shall bind the company only as follows 1 The warranty shall be limited to the repair or replacement of defective parts all other damage loss cost or obligation and claim whatsoever statutory or otherwise are hereby waived by the original purchaser Nuser and again the warranty hereby given covers only those labor charges specifically authorized by the company in advance 2 The warranty shall not apply to any failure or damage incurred through neglect lack of maintenance misuse abuse accident improper installation re designing of assemblies ignorance or through any other cause beyond the control of the compan
25. t of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation Revision 1 Swing Auger Mover Page 14 Mechanical Installation Sensor Probe The transmitter mounting kit contains a 12 chain a U bolt two strap plates four hex nuts four flat washers and two quick link connectors Drill two 4 holes 1 3 8 apart in the spout and attach the U bolt as shown in the following figure Use a quick link to attach the chain to the U bolt and the second quick link to attach the chain to the Sensor Probe The U bolt may be mounted on the inside of the spout if space is limited Figure 7 Full Bin Alarm option U Bolt Diagram Flat Washers Ubolt i E DEBT Hex Nuts eee Strap Plates Chains NS persi Quick link Auger Spout Electrical Installation Sensor Probe To install change the battery simply unscrew the top half off the Sensor Probe to reveal the circuit board and battery assembly Unclip the battery connector and slide the battery out of the cable ties to remove Insert the new battery in and clip the connector on Perform the self test described on page 15 Reassemble NOTE The Sensor is provided ready for operation with the 9v battery pre installed and thus requires no external hook up Kramble Industries Inc is not responsible or liable for indirect special o
26. y 3 The warranty does not cover products of other manufacturers beyond such warranty as may be made by such manufacturer 4 The warranty shall not apply to normal maintenance services or to deterioration of appearance of items due to normal use and exposure 5 The warranty shall not apply when the original purchaser user has allowed repair and or service work to be conducted on the product without authorization from the company IMPORTANT NOTE Before any warranty work is done contact Kramble Industries Inc for authorization Failure to do so may result in denial of warranty Kramble Industries Inc is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damage with respect to any economic loss loss of property loss of revenue or profit or costs of removal installation or reinstallation
Download Pdf Manuals
Related Search