Home

Sprinter 50 User Manual

1. gt Always replace with a complete battery set Ce Do not use old and new batteries together a Horizontal fine motion f Handle screw g Eyepiece b Battery compartment h LCD display c Circular level i Base plate d Gunsight j Levelling footscrew e Focusing knob Container Contents Sprinter batteries 4x allen key user manual error and operation messages leaflet strap Instrument Components Ce Do not use batteries from different manufac turers or batteries of different types 3 2 Set up instrument Levelling e Set up the tripod Extend the legs to a suitable length and ensure that the tripod head is approxi mately level Tread the tripod shoes firmly into the ground to ensure stability Mount the instrument on the tripod by screwing the tripod screw onto the base of the instrument e Use the three levelling foot screws to center the circular bubble in order to level the instrument Sprinter 50 1 0 0en Eyepiece Adjustment Point the telescope to a uniform light surface such as a wall or a piece of paper Turn the eyepiece until the cross hairs are sharp or distinct Target Image Focusing Use the gunsight to aim the objective lens at the staff Turn the horizontal fine motion screw until the staff is nearly centered in the field of view and then turn the focusing knob to focus on the staff Ensure that staff image and reticle are sharp or distinct Power ON The instrumen
2. 1 0 0en Symbols The symbols used in this Manual have the following meanings A DANGER Indicates an imminently hazardous situation which if not avoided will result in death or serious injury A WARNING Indicates a potentially hazardous situation or an unintended use which if not avoided could result in death or serious injury A CAUTION Indicates a potentially hazardous situation or an unintended use which if not avoided may result in minor or moderate injury and or appreciable mate rial financial and environmental damage Ce Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner Table of Contents TL Jottreoduetlon cciessascsesecscesavirsecetpeseasecessevsesesases 1 2 Instrument Components ssseeeeeeeeee eneee 2 3 Measurement Preparatlons 3 A User Interface siisii 4 Le ee BEE 6 6 Check Adiuet isinisi niidi 7 7 Error Messages A 9 8 Operation Messages 10 9 Care and Transport 11 10 Safety Directions cccececeeeteeeteeeeeeteeeee 12 11 Technical Data ssiri 21 Introduction ie 2 Sprinter 50 1 0 0en Instrument Components Accessories Tripod aluminum staff region dependant Optional sunshade 4 rechargeable batteries and charger 3 Measurement Preparations 3 1 Change battery Insert 4 AA dry cells according to the positive and negative signs as indicated on the holder
3. product by unauthorized personnel Safety Directions a ae Sprinter 50 1 0 0en Product specific treatment and waste management information can be downloaded from the Leica Geosystems home page at http www leica geosys tems com treatment or received from your Leica Geosystems dealer A WARNING Only Leica Geosystems authorized service workshops are entitled to repair these products 10 7 Electromagnetic Compatibil ity EMC Description The term Electromagnetic Compatibility is taken to mean the capability of the product to function smoothly in an environment where electromagnetic radiation and electrostatic discharges are present and without causing electromagnetic disturbances to other equipment A WARNING Electromagnetic radiation can cause distur bances in other equipment Although the product meets the strict regulations and standards which are in force in this respect Leica Geosystems cannot completely exclude the possi bility that other equipment may be disturbed A CAUTION There is a risk that disturbances may be caused in other equipment if the product is used in conjunction with accessories from other manufac turers for example field computers personal computers two way radios non standard cables or external batteries Precautions Use only the equipment and accessories recom mended by Leica Geosystems When combined with the product they meet the strict requirements stipu lated by th
4. 102 Too Bright Darken staff or reduce lighting on staff or shade the objective telescope E103 Too Dark Light up staff uniformly E104 No Staff Check targeting E106 Out Of Level Level the instrument E108 Data File Error Data file error E110 Target Too Close Move staff or instrument further apart E111 Target Too far Move staff or instrument closer together E112 Too Cold Stop working external temperature is outside the instrument operating temperature E113 Too Hot Stop working external temperature is outside the instrument operating temperature E114 Invalid Measurement Make another measurement If further measurement proved to be futile check staff position and Inverse Staff setting check the lighting condition at the staff and stray light check focusing and targeting check if sufficient length of barcode in the field of view Error Messages a Sprinter 50 1 0 0en No Error message Counter measure causes E115 Temperature Sensor Cover the objective telescope with a hand and switch ON the instrument Error Hardware communication failed E116 Adjustment Error Carry out the adjustment with guided steps make sure instrument is level and staff is truly vertical in normal position Collimation is out of correction range E119 Staff Blocked Not enough barcode length for measurement E120 Image sensor Error Contact services E121 Adjustmen
5. NGER Local safety authorities and safety experts must be contacted before working in hazardous areas or in close proximity to electrical installations or similar situations by the person in charge of the product 10 4 Responsibilities Manufacturer of the product Leica Geosystems AG CH 9435 Heerbrugg herein after referred to as Leica Geosystems is responsible for supplying the product including the user manual Safety Directions sae Sprinter 50 1 0 0en and original accessories in a completely safe condi tion Manufacturers of non Leica Geosystems acces sories The manufacturers of non Leica Geosystems acces sories for the product are responsible for developing implementing and communicating safety concepts for their products and are also responsible for the effec tiveness of those safety concepts in combination with the Leica Geosystems product Person in charge of the product The person in charge of the product has the following duties To understand the safety instructions on the product and the instructions in the user manual To be familiar with local regulations relating to safety and accident prevention To inform Leica Geosystems immediately if the product and the application becomes unsafe WARNING The person responsible for the product must ensure that it is used in accordance with the instruc tions This person is also accountable for the training and the deployment of personnel who use
6. Sprinter 50 User Manual Version 1 0 EN DE FR ES IT PT e NL NO SV EL DA when it has to be right Seica Geosystems User Manual Gebrauchsanweisung Manuel d utilisation Manual del usuario Manuale d uso Manual de Opera o Gebruiksaanwijzing Brukerhandbok Handbok Kayttajan kasikirja Brugervejledning Ka KA hl bei HRSBEIORKRRRDR User Manual English 1 Introduction Validity of this manual This manual is valid for Sprinter 50 Greg E on the purchase of a new Leica Trademarks ulati u w Lei Geosystems electronic level It is designed to make Al trademarks are the property of their respective levelling works easier and quicker on any construction site Available documentation Product Name Description i E Seier contains Imponan Sprinter 50 All instructions required in order A e Sa S Irections as we St Gre User Manual to operate the product to a basic e 10 Satay level are contained in this User Directions for further information ee cee eee with eae oF Read carefully through the User Manual before you nical data and safety directions use the product Product identification The model and the serial number of your product are indicated on the type plate Enter the model and serial number in your manual and always refer to this information when you need to contact your agency or Leica Geosystems authorized service workshop Type Serial no Introduction HEES F Sprinter 50
7. ad traffic A WARNING If computers intended for use indoors are used in the field there is a danger of electric shock Precautions Adhere to the instructions given by the computer manufacturer with regard to field use in conjunction with Leica Geosystems products A CAUTION If the accessories used with the product are not properly secured and the product is subjected to mechanical shock for example blows or falling the product may be damaged or people may sustain injury Precautions When setting up the product make sure that the accessories are correctly adapted fitted secured and locked in position Avoid subjecting the product to mechanical stress A CAUTION When using a vertical staff supported by one brace there is always the danger of falling for example by wind gusts and therefore danger of damage to equipment and danger of personal injuries Precautions Never leave a vertical staff supported by a brace unsupervised person at the staff A WARNING If the product is used with accessories for example masts staffs poles you may increase the risk of being struck by lightning Precautions Do not use the product in a thunderstorm A CAUTION During the operation of the product there is a hazard of squeezing extremities or entanglement of hairs and or clothes by rotating parts Precautions Keep a safe distance of the rotating parts WARNING If you open the product either of the following a
8. al rail ways Precautions Keep at a safe distance from electrical installations If it is essential to work in this environment first contact the safety authorities responsible for the electrical installations and follow their instructions Safety Directions A CAUTION Strong magnetic fields in the immediate vicinity e g transformers melting furnaces may influence the compensator and lead to measuring errors Precautions When measuring near strong magnetic fields check results for plausibility A CAUTION Be careful when pointing the product towards the sun because the telescope functions as a magni fying glass and can injure your eyes and or cause damage inside the product Precautions Do not point the product directly at the sun WARNING During dynamic applications for example stakeout procedures there is a danger of accidents occurring if the user does not pay attention to the envi ronmental conditions around for example obstacles excavations or traffic Precautions The person responsible for the product must make all users fully aware of the existing dangers Sprinter 50 1 0 0en A WARNING Inadequate securing of the working site can lead to dangerous situations for example in traffic on building sites and at industrial installations Precautions Always ensure that the working site is adequately secured Adhere to the regulations governing safety and accident prevention and ro
9. ctions may cause you to receive an electric shock Touching live components Safety Directions fas Goes Sprinter 50 1 0 0en e Using the product after incorrect attempts were made to carry out repairs Precautions Do not open the product Only Leica Geosystems authorized service workshops are entitled to repair these products A WARNING Batteries not recommended by Leica Geosys tems may be damaged if charged or discharged They may burn and explode Precautions Only charge and discharge batteries recommended by Leica Geosystems WARNING Using a battery charger not recommended by Leica Geosystems can destroy the batteries This can cause fire or explosions Precautions Only use chargers recommended by Leica Geosys tems to charge the batteries A CAUTION During the transport shipping or disposal of batteries it is possible for inappropriate mechanical influences to constitute a fire hazard Precautions Before shipping the product or disposing of it discharge the batteries by running the product until they are flat When transporting or shipping batteries the person in charge of the product must ensure that the applicable national and international rules and regulations are observed Before transportation or shipping contact your local passenger or freight transport company A WARNING High mechanical stress high ambient temperatures or immersion into fluids can cause leackage fire or explosions of t
10. e guidelines and standards When using computers and two way radios pay attention to the information about electromagnetic compatibility provided by the manufacturer CAUTION Disturbances caused by electromagnetic radiation can result in erroneous measurements Although the product meets the strict regulations and standards which are in force in this respect Leica Geosystems cannot completely exclude the possi bility that the product may be disturbed by very intense electromagnetic radiation for example near radio transmitters two way radios or diesel genera tors Safety Directions Im Sprinter 50 1 0 0en Precautions Check the plausibility of results obtained under these conditions A WARNING If the product is operated with connecting cables attached at only one of their two ends for example external supply cables interface cables the permitted level of electromagnetic radiation may be exceeded and the correct functioning of other prod ucts may be impaired Precautions While the product is in use connecting cables for example product to external battery product to computer must be connected at both ends 10 8 FCC Statement Applicable in U S WARNING This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installa
11. he batteries Precautions Protect the batteries from mechanical influences and high ambient temperatures Do not drop or immerse batteries into fluids A WARNING Short circuited battery terminals can overheat and cause injury or fire for example by storing or transporting in pockets if battery terminals come in contact with jewellery keys metallized paper or other metals Precautions Make sure that the battery terminals do not come into contact with metallic objects Safety Directions Eas Sprinter 50 1 0 0en A CAUTION Long term storage may reduce lifetime or damage the battery Precautions During long term storage maintain battery life by peri odic re charge A WARNING If the product is improperly disposed of the following can happen e If polymer parts are burnt poisonous gases are produced which may impair health e f batteries are damaged or are heated strongly they can explode and cause poisoning burning corrosion or environmental contamination By disposing of the product irresponsibly you may enable unauthorized persons to use it in contraven tion of the regulations exposing themselves and third parties to the risk of severe injury and rendering the environment liable to contamination Precautions The product must not be disposed with household waste Dispose of the product appropriately in accordance with the national regulations in force in your country Always prevent access to the
12. ion or use of the software or any part thereof is deemed to be an acceptance of all the terms and conditions of such licence agreement If you do not agree to all or some of the terms of such licence agreement you may not download install or use the software and you must return the unused software together with its accompanying documentation and the purchase receipt to the dealer from whom you purchased the product within ten 10 days of purchase to obtain a full refund of the purchase price 10 6 Hazards of Use WARNING The absence of instruction or the inadequate imparting of instruction can lead to incorrect or adverse use and can give rise to accidents with far reaching human material financial and environ mental consequences Precautions All users must follow the safety directions given by the manufacturer and the directions of the person respon sible for the product A CAUTION Watch out for erroneous measurement results if the product has been dropped or has been misused modified stored for long periods or trans ported Precautions Periodically carry out test measurements and perform the field adjustments indicated in the user manual particularly after the product has been subjected to abnormal use and before and after important measurements A DANGER Because of the risk of electrocution it is very dangerous to use staffs in the vicinity of electrical installations such as power cables or electric
13. l Data Height measurements Standard deviation per km double run ISO 17123 2 e Electronic measurement with Sprinter aluminum barcode staff 2 0mm Optical measurement with standard aluminum E scale Numeral staff 2 5mm e Standard Deviation for single staff reading 0 6 mm electronic and 1 2 mm optical at 30m Distance Accuracy 10 mm for D lt 10 m Standard Deviation Distance in m x 0 001 for D gt 10 m Range Distance measuring range for electronic measurements with standard aluminum barcode staff 2 m to 100 m Optical Shortest 50 cm focusing distance Measuring time single Typically 3 seconds and less in normal daylight condition needs longer measure Electronic measuring time in uniform dim light condition 20 lux Circular Bubble Circular Bubble Sensitivity 10 2 mm Compensator Magnet damped pendulum compensator with electronic range monitoring Tilt Warning Range Electronically 10 Compensator range Mechanically 10 Setting accuracy 0 8 max Standard Deviation Magnetic field sensitivity lt 10 Line of sight difference in horizontal constant magnetic field at a field strength of up 5 Gauss Power Supply Internal battery Technical Data C 2A i Sprinter 50 1 0 0en Battery Power Battery internal AA dry cells 4 x 1 5 V current rating max 300 mA LCD Type Monochrome display Dimensions 128 x 104 pixels Telescope Magnification O
14. otices greater than 40 C 104 F and clean them Do not Opening the product using tools for example repack until everything is completely dry screwdriver unless this is specifically permitted for certain functions 10 Safety Directions Modification or conversion of the product S e Use after misappropriation 10 1 General Introduction Use of products with obviously recognizable ore damages or defects Description e Use with accessories from other manufacturers The following directions should enable the person without the prior explicit approval of Leica Geosys responsible for the product and the person who actu tems ally uses the equipment to anticipate and avoid oper Inadequate safeguards at the working site for ational hazards example when measuring on roads The person responsible for the product must ensure Aiming directly into the sun that all users understand these directions and adhere to them Safety Directions jc A Sprinter 50 1 0 0en A WARNING Adverse use can lead to injury malfunction and damage It is the task of the person responsible for the equipment to inform the user about hazards and how to counteract them The product is not to be operated until the user has been instructed on how to work with it 10 3 Limits of Use Environment Suitable for use in an atmosphere appropriate for permanent human habitation not suitable for use in aggressive or explosive environments DA
15. press and hold measuring key for 3 The new electronic collimation error is displayed To seconds to accept accept new correction press and hold measuring key Step 2 Aim at Staff B and press MEAS key Measure for 3 seconds to accept otherwise single press of ment display press and hold measuring key for 3 measuring key to decline adjustment result seconds to accept amp Optical collimation error can be corrected by adjusting the reticle Check amp Adjust La Sprinter 50 1 0 0en 6 2 Circular level 6 3 Optical collimation Reticle By adjustment Step Description Step Description 1 Level instrument 1 Turn Allen key until design value is reached 2 Turn instrument by 180 2 Check collimation 3 Center bubble if it extends beyond the If the collimation error exceeds 3 mm over 60 m centering circle distance the collimation needs to be adjusted 4 Correct half of the error with the Allen key Ce Repeat steps 1 to 4 until the circular level bubble is centered at any random telescope pointing Check amp Adjust a 8 Sprinter 50 1 0 0en 7 Error Messages No Error message Counter measure causes E99 System Error Contact Hardware faults or file errors or adjustment errors or setting errors Services rendering instrument not working properly E100 Low Battery Change to new or freshly charged batteries E
16. ptical 24 x Free objective diameter 36 mm Clear Objective Aperture 2 Multiplication constant 100 Addition constant 0 Hz Circle Circle Engraving Plastic horizontal circle of 360 400 gon Graduation and numerals scale reso lution at 1 upper scale and at 50 gon intervals lower scale Side Drive Movement amp Play in side drive Continuous horizontal dual drive System e MMI capability e Measuring Height and Distance e Keyboard 1 rubber key Temperature Range Operating Temperature 10 C to 50 C e Storage Temperature 40 C to 70 C Environmental Specifi Protection against water dust and sand IP55 IEC 60529 cations Protection against Humidity Up to 95 humidity no condensation The effects of condensation are to be effectively counteracted by periodically drying out the product Technical Data Lo Sprinter 50 1 0 0en Dimensions Instrument e Length incl front of lens tube to fully extended eyepiece 219 mm e Width from the external face of focusing drive to the external side of circular bubble holder 196 mm e Height incl hand grip base fully extended 178 mm Container e Length 400 mm e Width 220 mm e Height 325 mm Weight 2 55 kg including 4 AA batteries Technical Data ade eed Sprinter 50 1 0 0en
17. s to decline adjustment program to accept measurement and adjustment result result User Interface i se Sprinter 50 1 0 0en 5 Operation 5 1 Height and Distance Mea Height and Distance measurement electronic surement Example of an electronic measurement m l ees a 1 235m Ee gt a 568m Measurement Measuring in Measurement Standby Mode progress with height and g distance Ce Always aim at the center of bar code staff and focus the staff image for accurate measurement Step Key Description 1 Press to switch on the instru ment Leica logo is displayed follow by the default measure ment standby mode 2 Aim at staff and focus Lightly trigger the measurement key to activate measurement 3 Height and distance measure ment is displayed Operation Lana ees Sprinter 50 1 0 0en z i Now shift the Sprinter towards staff A and set it up at 6 Check amp Adjust about 3 m to staff A EN 6 1 Electronic collimation ad justment A 15m_ 15m B Step 3 Aim at Staff B and press MEAS key Measure ment display press and hold measuring key for 3 seconds to accept To activate Adjustment program press and Step 4 Aim at Staff A and press MEAS key Measure hold measuring key for 3 seconds ment display press and hold measuring key for 3 Step 1 Aim at Staff A and press MEAS key Measure seconds to accept ment display
18. sport company Field adjustment After transport inspect the field adjustment parame ters given in this user manual before using the product 9 2 Storage Product Respect the temperature limits when storing the equipment particularly in summer if the equipment is inside a vehicle Refer to 11 Technical Data for information about temperature limits Field adjustment After long periods of storage inspect the field adjust ment parameters given in this user manual before using the product If the equipment is to be stored for a long time remove the alkaline batteries from the product in order to avoid the danger of leakage Care and Transport OCO a Sprinter 50 1 0 0en 9 3 Cleaning and Drying 10 2 Intended Use Product and Accessories Permitted use e Blow dust off lenses e Electronic and optical height measurements to a e Never touch the glass with your fingers staff e Use only a clean soft lint free cloth for cleaning If e Optical height readings necessary moisten the cloth with water or pure Optical distance measuring with stadia readings alcohol e Data communication with external appliances Do not use other liquids these may attack the Adverse use polymer components e Use of the product without instruction Damp products Use outside of the intended limits Dry the product the transport container the foam e Disabling safety systems inserts and the accessories at a temperature not e Removal of hazard n
19. t Inverse Check the staff orientation and staff setting Staff Not Allowed 8 Operation Messages Operation message Counter measure remark Abort Measurement Current measuring process is terminated Wait File System Clean Up Cleaning up of temporary files system files Shut Down System is switching OFF Sand Clock Icon Please wait System task is in progress Operation Messages mp Sprinter 50 1 0 0en 9 Care and Transport 9 1 Transport Transport in the field When transporting the equipment in the field always make sure that you either carry the product in its original transport container or carry the tripod with its legs splayed across your shoulder keeping the attached product upright Transport in a road vehicle Never carry the product loose in a road vehicle as it can be affected by shock and vibration Always carry the product in its transport container and secure it Shipping When transporting the product by rail air or sea always use the complete original Leica Geosystems packaging transport container and cardboard box or its equivalent to protect against shock and vibration Shipping transport of batteries When transporting or shipping batteries the person in charge of the product must ensure that the applicable national and international rules and regulations are observed Before transportation or shipping contact your local passenger or freight tran
20. t is ready to measure L Technical hints First check and adjust the electronic and optical line of sight errors then the circular level on the instrument and then the staff before starting work in the field after long storage periods after long transportation Keep the optics clean Dirt or condensation on the optics can limit measurements e Before starting work let the instrument adjust to the ambient temperature approx 2 minutes per C of temperature difference e Avoid measuring through window panes Staff sections have to be fully extended and prop erly secured Measurement Preparations 4A Sprinter 50 1 0 0en Touching the upper third of the tripod can damp vibrations at the instrument due to wind Use the lens hood to cover the objective when backlight disturbs Evenly illuminate the measuring area of the staff with a flashlight or spotlight in darkness 4 User Interface Modes MEAS Measurement Mode Adjustment Mode ADJ Icons Battery icon at various capacities COC OCC Co b Measurement display symbols Al Measured staff height Measured distance C gt Electronic collimation error can be corrected with the on board Adjustment program Key Symbol 1 level functions 24 level functions a On Off Power On or Off switch NONE b MEAS Measuring trigger key single Press and hold for 3 seconds to start Adjustment C pres
21. the product and for the safety of the equipment in use 10 5 International Warranty Software Licence Agreement International Warranty The International Warranty can be downloaded from the Leica Geosystems AG home page at http www leica geosystems com internationalwarranty or received from your Leica Geosystems dealer Software Licence Agreement This product contains software that is preinstalled on the product or that is supplied to you on a data carrier medium or that can be downloaded by you online pursuant to prior authorization from Leica Geosys tems Such software is protected by copyright and other laws and its use is defined and regulated by the Leica Geosystems Software Licence Agreement which covers aspects such as but not limited to Scope of the Licence Warranty Intellectual Property Rights Limitation of Liability Exclusion of other Assurances Governing Law and Place of Jurisdiction Please make sure that at any time you fully comply with the terms and conditions of the Leica Geosys tems Software Licence Agreement Such agreement is provided together with all products and can also be found at the Leica Geosystems home page at http www leica geosystems com swlicense or your Leica Geosystems dealer Safety Directions 14 Sprinter 50 1 0 0en You must not install or use the software unless you have read and accepted the terms and conditions of the Leica Geosystems Software Licence Agreement Installat
22. tion This equipment generates uses and can radiate frequency energy and if not installed and used in accordance with the instructions may cause Labelling harmful interference to radio communication However there is no guarantee that interference will Jee not occur in a particular installation Bie Eee If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the useris ti encouraged to try to correct the interference by one or VRT more of the following measures J ns eee e Reorient or relocate the receiving antenna This device complies with part 15 of the FCC e Increase the separation between the equipment Rules Operation is subject to the following two and the receiver conditions 1 This device may not cause harm ev Connect the equipment into an outlet on a circuit ful interference and 2 this device must accept any interference received including inter ference that may cause undesired operation different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help WARNING Changes or modifications not expressly approved by Leica Geosystems for compliance could void the user s authority to operate the equipment Safety Directions ia 5 207 7 Sprinter 50 1 0 0en 11 Technica

Sprinter 50 User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents