Doro PhoneEasy 510 - User Manual
Contents
1. Installing the SIM card and the battery The SIM card holder is located behind the battery 1 Remove the battery cover and the battery if it is already installed Insert the SIM card by gently sliding it into the holder Make sure that the SIM card s contacts are facing inwards and that the cut off corner is pointing downwards Take care not to scratch or bend the contacts on the SIM card 3 Insert the battery by sliding it into the battery compartment with the contacts facing upwards to the left 4 Replace the battery cover English Charging Only use batteries charger and accessories that have been approved for use with this particular model Connecting other accessories may be dangerous and may invalidate the phone s type approval and guarantee When the battery is running low 7 is displayed and a warning signal is heard To charge the battery connect the mains adapter to a wall socket and to the charging socket CE is displayed briefly when the charger is connected to the phone and a when it is disconnected The battery charge indicator will be animated while charging It takes approximately 3 hours to fully charge the battery is displayed on the screen when charging is completed If the phone is turned off when the charger is connected to the phone only the battery charge indicator will be shown on the display Note To save power the LCD backlight goes off after a while Press any button to illumin2. 24 English Adding speed dial numbers Press Menu scroll to gt and press OK Select Calls and press OK Select Speed dial and press OK Select EX and press Edit Select an entry from the phonebook and press OK Repeat to add speed dial entries for buttons E 0 D AR To change contact select an existing entry and press Options then select Edit or Delete and press OK aS SYS To speed dial an entry from standby press and hold corresponding button You can edit the contact information for the dedicated speed dial buttons BY E and 1 Press corresponding button Use VU to highlight the name or the number then press Edit 2 Press OK to confirm Delete with Clear Top 10 Set the entry as one of the first 10 contacts listed in the phonebook Press Menu scroll to SP and press OK Select Calls and press OK Select Top 10 and press OK Select one of the empty entries and press Add Use VIP to scroll through the phonebook or quick search by pressing the key corresponding to the first letter of the entry Press OK to save the selected entry or press Back to discard changes iaia D To delete a Top 10 entry select the entry in the Top 10 list and press Options then Delete Call time During a call the duration of the call is shown You can check the duration of your calls 25 English Press Menu scroll to SP and press OK Select Calls and press OK Select Call time and press OK
3. Echo or noise Regional problem from Hang up and redial This may switch to bad network relay another network relay Failure to add a contact Phonebook memory full Delete contacts to free up memory Failure to set a function Function not supported Contact your service provider or subscribed from network Safety instructions The unit and the accessories can contain small parts Keep all of the equipment out of the reach of small children The mains adapter is the disconnect device between the product and mains power The mains socket outlet must be close to the equipment and easily accessible 44 English Network services and costs Your device is approved for use on the GSM 900 1800 1900 MHz networks To use the device you need a subscription with a service provider Using network services may result in traffic costs Some product features require support from the network and you may need to subscribe to them Operating environment Follow the rules and laws that apply wherever you are and always turn off the unit whenever its use is prohibited or can cause interference or hazards Only use the unit in its normal user position This unit complies with guidelines for radiation when it is used either in a normal position against your ear or when it is at least 1 5 cm from your body If the unit is carried close to your body in a case belt holder or other holder these holders should not contain any metal and
4. Connect the headset to the headset socket Q 2 Press Menu scroll to lt and press OK The radio is turned on The tuned frequency is displayed Select channel using Sw or om Use the side keys to adjust the volume 3 Press ea to return to standby mode The radio will continue to play Save frequency 1 Press Menu scroll to lt I and press OK 2 select channel using Ne 0r AN 3 When a station has been found select Options 4 Select Save frequency and press OK 5 Enter a name for the new channel see Entering text 5 Dif 6 Press Save Switch off 1 Press Menu scroll to lt I and press OK 2 Press Options then press Switch off Tip Disconnecting the headset will also turn off the radio Channel list editing the channel list 1 Press Menu scroll to lt I and press OK 2 Select Options 3 Select Channel list and press OK 4 Select the channel you wish to edit and press Options or Add 37 English 5 Select one of the following options and press OK Play the selected channel Delete Delete the channel Press Yes to confirm or No to return to the channel list Edit the channel name then press ve to edit the frequency use J to enter the decimal point Press Save Selecting channels Press keys EB E1 to quick select a preset channel while the radio IS playing Manual input changing search mode 1 Press Menu scroll to and press OK 2 Select Options 3 Select Manual
5. Failure to charge the battery Battery or charger Check the battery and charger damaged Battery should only be Improve the charging environment charged in temperatures between 0 C and 40 C Charger incorrectly Check the charger connections connected to phone or power socket Standby time decreases Battery charge capacity Install a new battery too low Too far from base Searching the network consumes battery station phone is power Find a place with a stronger signal or constantly searching temporarily turn off the phone for signal Failure to place or receive calls Call barring activated Deactivate call barring If this does not solve the problem contact your service provider PIN code not accepted Wrong PIN code entered Enter the PUK code to change the PIN code too many times or contact your service provider English SIM card error SIM card damaged Check the condition of the SIM card If it is damaged contact your service provider SIM card incorrectly Check the installation of the SIM card Remove installed the card and reinstall it SIM card dirty or damp Wipe the contact surfaces of the SIM card with a clean cloth Failure to connect to network SIM card invalid Contact your service provider No coverage of GSM Contact your service provider service Weak signal Too far from base station Try again from another location Network congestion Try calling at a later time
6. Select one of the following options and press OK Last call Show the elapsed time of the most recent call Outgoing Show the elapsed time of all dialled calls calls eu casi ae era the elapsed time of all received calls calls Reset all Press Yes to reset the timer or No to discard changes Any key Select Any key and press OK select On and press OK to be able to answer Incoming calls by pressing any button exemption Call setup Depending on network support and subscription Contact your service provider for more information Caller ID Display or hide your phone number on the recipient s phone when you call Press Menu scroll to gt and press OK Select Calls and press OK Select Call setup and press OK Select Caller ID and press OK Select one of the following options and press OK Set by Use default setting by the network network ta Hide ID Never show your number Send ID Always show your number Call waiting You can handle more than one call at a time An alert tone will be heard if there is an incoming call while talking To put the current 26 English call on hold and answer the incoming call press Options select Answer and then OK 1 Press Menu scroll to SP and press OK Select Calls and press OK Select Call setup and press OK Select Call waiting and press OK ia one of the following options and press OK Enables call waiting SR WN Disables call waitin
7. You are not able to send any SMS either Passwords change your passwords To change the PIN PIN2 or the Phone code passwords 34 English 1 Enter the current code and confirm with OK 2 Enter a new code and confirm with OK 3 Enter the new code again and confirm with OK Reset settings If you select Reset settings the changes that you have made to the phone settings will be reset to default settings Input the phone password and press OK to reset Reset all If you select Reset all your phone s settings and content such as contacts number lists and messages will be deleted in phone memory SIM memory is not affected Input the phone password and press OK to reset Note The default Phone code Is 1234 Additional functions Alarm Press Menu scroll to A and press OK Select On and press OK Enter the alarm time using the keypad then press OK For a single occurrence select Single and press OK For a repeated alarm select Repeated and press OK Scroll through the list of weekdays and press On Off to enable disable the alarm for each weekday then press Done To edit an alarm press Edit then press OK 7 To stop the alarm press Off The alarm is now deleted Note The alarm will work even when the phone is switched off Do not press Yes to power on If wireless phone use is prohibited or when it may cause interference or danger When the alarm goes off a signal will sound Press Stop to turn of
8. calls AII calls User can dial out but not receive incoming calls When User can not receive incoming calls while roaming roaming operating in other networks Cancel all Cancel all call barring password needed Messages 1 Press Menu scroll to gt and press OK 2 Select Messages and press OK 3 Select one of the following options and press OK Predictive text gt Select On and press OK to enable Predictive text eZiType see Entering text 5D DF Write speed gt You can change the speed at which keypad characters repeat before the cursor moves onto the next character Select Fast Normal or Slow and press OK Memory status Displays the percentage of memory space used on the SIM card and in the phone memory Phone memory can store up to 200 messages 28 English Storage 1 Select SIM default to store messages on the SIM card or Phone to store messages In the phone memory 2 Press OK Profile set This number is needed to use the message function The number to your service centre is supplied by your service provider and is usually set on the SIM card If the service centre number is saved on the SIM card It is shown If not you can enter the number yourself Contact your service provider for more information 1 Press Edit and enter the service centre number Press Clear to delete 2 Press OK to save the new number Cell information You can receive messages on various topics from yo
9. Specifications Network GSM 900 1800 1900 MHz Dimensions 118 mm x 53 mm x 13 mm English Weight 80 g including battery Battery 3 7 V 800 mAh Li ion battery eZiType is a trademark of Zi Corporation vCard is a trademark of the Internet Mail Consortium Hearing aid This device should work with most hearing aid equipment in the market However full compatibility with all equipment can not be promised Specific Absorption Rate SAR This device meets applicable international safety requirements for exposure to radio waves Doro PhoneEasy 510 measures 0 802 W kg measured over 10 g tissue The maximum limit according to WHO is 2 0 W kg measured over 10 g tissue Declaration of Conformity Doro hereby declares that Doro PhoneEasy 510 conforms to the essential requirements and other relevant regulations contained in the Directives 1999 5 EC R amp TTE and 2002 95 EC RoHS A copy of the Declaration of Conformity is available at www doro com dofc 49 English 50 PhoneEasy 510 2011 English Version 1 2 CE 0678 2012 Doro AB All rights reserved www doro com
10. automatic switch off time for the built in torch 1 Press Menu scroll to gt and press OK 2 Select General and press OK ni Select Torch and press OK DEE one of the following options and press OK Turns off automatically after 1 min ei urns off automatically after 2 min No limit No automatic turn off Note The torch will drain the battery very quickly Remember to turn off the torch after use Phonebook storage 1 Press Menu scroll to SP and press OK 2 Select General and press OK 3 Select Phonebook storage and press OK 4 Select one of the following options and press OK 1 phone number per contact Number and length of the phone numbers contacts that can be stored will vary depending on SIM card service provider preferences 300 contacts with 3 phone numbers each Mobile Home or Office Sound Note Silent needs to be set to Off to access Tone setup Volume Alert type and Extra tone See Silent p 21 20 English Audio setup If you use a hearing aid or have hearing difficulties when using the telephone in a noisy environment you can customize the phone s audio settings 1 Press Menu scroll to gt and press OK 2 Select Sound and press OK 3 Select Audio setup and press OK 4 Select one of the following options and press OK Normal For normal hearing in normal conditions For mild hearing impairment or usage In noisy environment For moderate hearing impairment or usage
11. rio max max length 20 length 40 Example You want to send Jeff Jackson s mobile number home number and his office number to Doro PhoneEasy 510 The mobile number is 0 00 393939 Home number 046 280 50 11 Office number 046 280 50 83 phonebook Jeff Jackson 0 00393939 0462305011 046280 5083 The number will be saved in the 510 Phonebook as DI English A Jeff Jackson 0700393939 ra 0462805011 Hn 0462805083 Note Only use numerals for parameters 2 3 and 4 If you use letters in these parameters it will be stored as empty blank In the Phonebook Contacts already saved in the Phonebook will not be replaced They will be duplicated This Is to avoid unintentional removal of contacts from the Phonebook Tip When storing international numbers always use before the country code for best operation Enter the phone number including the area code Setting the emergency function command e1 P2 fes a a activation n number number location in max Number list length 40 confirm with g S signal type O High l Low 2 Silent m message max length 0 si 40 English Example You want to activate the emergency function alert a 1 You want Jeff Jackson to be stored in Number list in position one 1 with phone number 0700 393939 alert n 1 Jeff Jackson 0700393939 You want the SMS message to be sent out when the emergency button Is pressed Example of content i
12. taking place turn the phone off immediately 45 English Areas with explosion risk Always turn off the unit when you are in an area where there is a risk of explosion Follow all signs and instructions There is a risk of explosion in places that include areas where you are normally requested to turn off your car engine In these areas sparks can cause explosion or fire which can lead to personal injury or even death Turn off the unit at filling stations and any other place that has fuel pumps and auto repair facilities Follow the restrictions that apply to the use of radio equipment near places where fuel is stored and sold chemical factories and places where blasting is in progress Areas with risk for explosion are often but not always clearly marked This also applies to below decks on ships the transport or storage of chemicals vehicles that use liquid fuel such as propane or butane areas where the air contains chemicals or particles such as grain dust or metal powder Li ion battery This product contains a Li ion battery There is a risk of fire and burns if the battery pack is handled improperly Danger of explosion If battery is incorrectly replaced To reduce risk of fire or burns do not disassemble crush puncture short external contacts expose to temperature above 60 C 140 F or dispose of in fire or water Recycle or dispose of used batteries according to the local regulations or referen
13. text CD NT SENTE J Sal SO DMOMNS a a be 8 VE AR ee 8 Calk VAPOR IANO nin 9 Speed dial SV 9 ANS NO We CR neem E E gine EEEE 9 SC a en aa doit 9 OA a a na 9 SO call a e e E EE 10 Emergency button rren 10 PHONCHOO creano 12 Creating a phonebook entry ui 12 Creating ICE entry In Case of Emergency F 12 Managing Phonebook ENTries 12 ICE In Case of Emergency Fr 14 MSIE ALES RTE E E E A E E T 15 Creating and sending SMS 15 INDOX SEL OUO rar EEEE 15 AI OS cc a a as 16 Retrieving and diallINg ss 16 SCHINSS siria 17 Cf E ae 17 English DISP iii 22 ARR A 24 ERIS eke to ia i 28 Emergency PF 30 Se i rei riti pe rn 32 Additional FUNCHOIS srrin arena 35 Rls ea 35 CA NE A ant 36 CE a de eee ei 36 FIV CIO ER 37 OC ee ee eer E ene n 38 Instructions for the REMOTE USER 39 OC OO UNS sicario 43 SAL INMSUPUIC HONS PR TE EENE EENEN 44 Network services and costs 45 Operating environment seresneresneenes 45 MOGGI slo 45 Areas with explosion risk 46 He OM 1 ORCI ari ani 46 Protect your hearing irene 46 EIMERCCTICY Call Sarriren REENER 47 L E Sx lai ce 47 Care and maintenance i 48 VI ea ra 48 S D C ICO ee ea on arenes 48 FICANNS ddr 49 Specific Absorption Rate SAR este 49 Declaration of Conformity i 49 English Installation Turn off the phone and disconnect the charger before removing the battery cover
14. the product should be placed at the distance from your body specified above Make sure that the distance instructions above are followed until the transfer is complete Parts of the unit are magnetic The unit can attract metal objects Do not keep credit cards or other magnetic media near the unit There is a risk that information stored on them can be erased Medical units The use of equipment that transmits radio signals for example mobile phones can interfere with insufficiently protected medical equipment Consult a doctor or the manufacturer of the equipment to determine if it has adequate protection against external radio signals or if you have any questions If notices have been put up at health care facilities instructing you to turn off the unit while you are there you should comply Hospitals and other health care facilities sometimes use equipment that can be sensitive to external radio signals Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of 15 cm be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker Persons with pacemakers e Should always keep the phone more than 15 cm from their pacemaker when the phone is turned on e Should not carry the phone in a breast pocket e Should use the ear opposite the pacemaker to minimize the potential for interference If you have any reason to suspect that interference is
15. Creating a phonebook entry 1 Press Menu scroll to and press OK 2 Select New contact and press Add 3 Enter a A Name for the contact see Entering text 5 p 7 Delete with Clear _ 4 Use sala to select El Mobile Pi Home or l E Office and enter the phone number s including the area code 5 Press Save Tip For international calls always use before the country code for best operation Press twice for the international prefix Creating ICE entry In Case of Emergency With this additional information and medical information first responders can access this information from the victim s phone in case of emergency In the event of a trauma it Is critical to have this information as early as possible which can increase the chances of survival All fields are optional but the more information provided the better See CE In Case of Emergency p 14 on how to configure your ICE information Managing phonebook entries 1 Press Menu scroll to and press OK 2 Select a contact and press Options 3 Select one of the following options and press OK View Show details for the selected contact Edit 1 Use VIA to move the cursor Delete with Clear 2 Press Save 12 English Add See Creating a phonebook entry p 12 Call Press OK to call the contact Send SMS Press OK to write a SMS message see Creating and sending SMS D 15 Delete Press OK to delete the selected phonebook entry Press Yes t
16. DORO PhoneEasy 510 SET UP amp USER GUIDE Find more user manuals and product information at www liGo co uk manuals doro FO 09 50 Menu Name j A B CO GR 1 ao i 2 ABC 3 DEF 4 cur 5 KL 6 Bko Fos Mr Ser l Ko PO FS j Doro PhoneEasy 510 English ill n 229 08 45 Menu Name doro amp DESIGN BY DORO OF SWEDEN a Tsi i aldo IL aa 1 _ English Torch Volume control Display Left selection button Call button Speed dial Voice mail Key lock 9 Silent Input method 10 Message shortcut 11 End call Power on off 12 Arrow keys Sao e ES 14 15 16 17 18 19 20 21 22 2 La 1 La 4 1 I 1 5 N 1 ll I s 1 1 1 1 1 1 1 1 1 Right selection button Charging contacts for use with charging stand Emergency key Battery cover Charging socket Headset socket Loudspeaker Lanyard attachment Charging stand Lanyard English WS eri 1 Installing the SIM card and the battery 1 CS a a ne nsaty ere tena eeanenewsenesee 2 00 ea add E EEE E 3 ASSIS N TOC OS ae see en idee den 3 Display status symbols ane aa sam scans 3 Display main SOS eee a a aa ne 4 ODA OM aE r ea ee ee a a ee na 5 Activating the Pena D MARIS Clarion E a 6 Making a call from the Phonebook 6 FC OPV a Cali errara ae iii 6 VOIS CONDO PAPER A E RO 6 Entering
17. In very noisy environment Tone setup 1 Press Menu scroll to Pad and press OK 2 Select Sound and press OK 3 Select Tone setup and press OK 4 Select Ring tone and press OK 5 Scroll LV A to select one of the available melodies the melody will be played Press OK to confirm or Back to discard changes 6 Set up the Alarm Message tone Keypad tone Power on and Power off in the same way Ringtone volume 1 Press Menu scroll to gt and press OK 2 Select Sound and press OK 3 Select Volume and press OK 4 Scroll LM UM to change the ring volume then press OK Silent 1 Press Menu scroll to gt and press OK Select Sound and press OK Select Silent and press OK Select On or Off and press OK ai cali 21 English Tip Press and hold shortcut button E to activate deactivate Silent Alert type Incoming calls can be signalled by a ring tone and or vibration 1 Press Menu scroll to gt and press OK 2 Select Sound and press OK 3 Select Alert type and press OK 4 Scroll LV UMA to select signalling mode then press OK Ring only Ring tone only Vib only Vibration only Vib and ring Vibration and ring tone Vib then Starts with vibration and adds ring tone after a short ring while Silent No sound or vibration the display light is lit Extra tone Warning and error tones are used to alert you of low battery power phone and SIM card errors etc 1 Press Men
18. Save when done Name Your own name Birth Your date of birth Height Your height Weight Your weight Language Your language Insurance Your insurance provider and policy number Contact 1 Press Options and then OK to Add or Delete a Contact 2 contact from the phonebook or Save to accept the Doctor current entry If possible add your relationship to your ICE contacts in the phonebook such as ICE Wife Mary Smith Condition Any medical conditions medical devices e g diabetic pacemaker Allergies Any known allergies e g penicillin bee stings Blood type Your blood type Vaccination Any relevant vaccination Medication Any medication that you are treated with Other info Other information e g organ donor living will consent to treat 14 English Messages Creating and sending SMS Note Before you can send any SMS you need to save your message centre number The number to your service centre is supplied by your service provider and is usually set on the SIM card If not you can enter the number yourself See Profile set p 29 1 Press shortcut button or press Menu scroll to and press OK 2 Select Write message and press OK 3 Type your message see Entering text s p then press To 4 Select a recipient from Phonebook and press OK Alternatively select Enter number to add recipient manually Enter the phone nu
19. about your vehicle or any additional equipment Do not keep or transport flammable liquids gases or explosives together with the unit or its accessories For vehicles equipped with air bags Remember that air bags fill with air with considerable force Do not place objects including fixed or portable radio equipment in the area above the airbag or the area where it might expand Serious injuries may be caused if the mobile phone equipment is Incorrectly installed and the airbag fills with air It is prohibited to use the unit in flight Turn off the unit before you board a plane Using wireless telecom units inside a plane can pose risks to air safety and interfere with telecommunications It may also be illegal 47 English Care and maintenance Your unit is a technically advanced product and should be treated with the greatest care Negligence may void the warranty Protect the unit from moisture Rain snowfall moisture and all types of liquid can contain substances that corrode the electronic circuits If the unit gets wet you should remove the battery and allow the unit to dry completely before you replace it e Do not use or keep the unit in dusty dirty environments The unit s moving parts and electronic components can be damaged e Do not keep the unit in warm places High temperatures can reduce the lifespan for electronic equipment damage batteries and distort or melt certain plastics e Do not keep the unit in c
20. ate the display Full battery capacity will not be reached until the battery has been charged 3 4 times Batteries degrade over time which means that call time and standby time will normally decrease with regular use Save energy When you have fully charged the battery and disconnected the charger from the device unplug the charger from the wall outlet English Symbols Assistive functions The following symbols indicate information in the manual about assistive functions for Seeing Handling Hearing Safety Display status symbols ENA S ENEN No network coverage Ring only Unread message in Inbox wee Vibration only Battery level Roaming in other network Headset connected Voice mail message English 4 main symbols Sy sermon i BS hemes eee _ warmin Jspeakeron joe N Speero O agi Nen message Q fouteoing can Serwo ere TS a ET Volume control X Processing please wait English Activating the phone Press and hold the red button f on the phone to turn it on off Confirm with OK to power off If the SIM card is valid but protected with a PIN code Personal Identification Number PIN is displayed Enter the PIN code and press OK E upper left corner of keypad Delete with Clear upper right corner of keypad Note If PIN and PUK codes were not provided with your SIM card please contact your service provider Attempts shows the number o
21. calls of each type can be stored in the log For multiple calls related to the same number only the most recent call IS saved Retrieving and dialling 1 Presse Alternatively press Menu scroll to gt and press OK 2 Use VIA to scroll through the Call log A Received call gt Dialled call O Missed call O 16 English 3 Press a to dial the number or press Options for the following settings lew Show details for the selected call Delete the call Delete all Delete all calls in the Call log Save Save the number in the Phonebook Settings Note The settings described in this chapter are carried out in standby mode Press w to return to standby mode General Time amp date Setting the time and date Press Menu scroll to SP and press OK Select General and press OK Select Time amp date and press OK Select Set time and press OK Enter the time HH MM then press OK Select Set date and press OK Enter the date DD MM YYYY then press OK Setting the time date format Press Menu scroll to SP and press OK Select General and press OK Select Time amp date and press OK Select Set format and press OK Select Time format and press OK Select 12 hours or 24 hours and press OK Select Date format and press OK Select the desired date format and press OK SER ea RR RIS Setting Auto time on off 1 Press Menu scroll to gt and press OK 17 English Select General a
22. ce guide supplied with your product Protect your hearing This device has been tested to comply with the Sound Pressure Level requirement laid down in the applicable EN 50332 1 and or EN 50332 2 standards 46 English Excessive exposure to loud sounds can cause hearing damage Exposure to loud sounds while driving may distract your attention and cause an accident Listen to a headset at a moderate level and do not hold the device near your ear when the loudspeaker is in use Note For France mobile headphones or earphones for this device have been tested to comply with the Sound Pressure requirement laid done In the applicable NF EN 50332 1 2000 and or NF EN 50332 2 2003 standards as required by French Article L 5232 1 A pleine puissance l coute prolong e du baladeur peut endommager l oreille de l utilisateur Emergency calls Mobile phones use radio signals the mobile phone network the terrestrial network and user programmed functions This means that connection cannot be guaranteed in all circumstances Therefore never rely only on a mobile phone for very Important calls such as medical emergencies Vehicles Radio signals can affect electronic systems in motor vehicles for example electronic fuel injection ABS brakes automatic cruise control air bag systems that have been incorrectly installed or are inadequately protected Contact the manufacturer or Its representative for more information
23. e background may interfere with the function Call waiting An alert tone will be heard if there is an incoming call while talking To put the current call on hold and answer the incoming call press Options select Answer and then OK 1 selection buttons have multiple functions The current key function Is shown above the selection button on the display 8 English Tip Call waiting must be activated see Call setup p 26 Call information During a call the outgoing or incoming phone number and the elapsed call time is displayed If the identity of the caller is withheld Unknown is displayed Speed dial You can use keys EY E and and you can also use the numerical keys J and A K To speed dial an entry from standby press and hold the corresponding key See Speed dial D p 24 Key lock You can lock the keypad to prevent the keys being accidentally pressed for example when your phone is in your handbag Press and hold to lock unlock the keypad Incoming calls can be answered by pressing m a even if the keypad is locked During the call the keypad is unlocked When the call is ended or rejected the keypad is locked again See Keypad lock p 33 Note The emergency number can be dialled without unlocking the keypad Silent Silent is a fixed profile with Keypad tone Message tone and Ring tone disabled while Vibration Tasks and Alarm are unchanged Tip Press and hold shortcut button E to activate deacti
24. e you can prevent a possible false alarm by pressing e e An emergency SMS is sent to all recipients e The first recipients in the list is dialled If the call is not answered within 25 seconds the next number is dialled Dialling is repeated 3 times or until the call is answered or until e IS pressed 10 English e The Emergency function may be configured so that the receiver of the call must press O zero to confirm in order to stop the alarm sequence If there is a risk that the emergency call will be answered by a voice mail answering service please activate the function Confirm with O See Confirm with O p 31 Note Some private security companies can accept automatic calls from their clients Always contact the security company before using their phone number Information to the receiver of an Emergency call when Confirm with O is activated After receiving the emergency message each number in the Number list will be called sequentially To confirm the emergency call the receiver need to press K If the receiver doesn t press J within 60 seconds after answering the call will be disconnected and the next number in sequence will be called If the receiver press J within 60 seconds the call is confirmed and no further call attempts will be made emergency sequence interrupted 11 English Phonebook The phonebook can store 300 entries with 3 phone numbers in each entry
25. er the message and then press OK to confirm Note You must write a message If you activate the SMS function Confirm with O Select one of the following options and press OK 31 English The phone will dial the first number on the list If the call is not answered within 25 seconds the next number is dialled Dialling is repeated 3 times or until the call is answered or until is pressed The function will work as above AND If the receiver doesn t press J within 60 seconds the call will be disconnected and the next number in sequence will be called If the receiver presses J within 60 seconds the call Is confirmed and no further call attempts will be made emergency sequence interrupted Signal type Adjustment of the signal type for notification of the emergency sequence Select one of the following options and press OK High Loud signals default Low One low signal Silent No sound indication like a normal call Alarm info Please read this important safety information before enabling the emergency function Be careful about including numbers with automatic answering in the call list as the alarm sequence stops once the call is answered Note This information is not applicable if Confirm with 0 is set to On Security 1 Press Menu scroll to gt and press OK 2 Select Security and press OK SIM lock The SIM card is protected with a PIN code Personal Identification Number The ph
26. f PIN attempts left When no more attempts remain PIN blocked is displayed The SIM card must now be unlocked with the PUK code Personal Unblocking Key 1 Enter the PUK code and confirm with OK 2 Enter a new PIN code and confirm with OK 3 Re enter new PIN code and confirm with OK Start up wizard When starting the telephone for the first time you can use the Start up wizard to set some basic settings When Run start up wizard is displayed press Yes to change Language Time amp date Ring tone Volume Text size or Themes Press No if you don t want to change Tip You can run the Start up wizard later if you want see Start up wizard p 18 Standby Idle mode When the phone is ready to use and you have not keyed in any characters the phone is in standby Left selection button in standby is Menu Right selection button in standby is Name English Tip You can always press w to return to standby Changing the language time and date The default language is determined by the SIM card See General p 17 on how to change language time and date Making a call 1 Enter the phone number including the area code Delete with Clear 2 Press a to dial Press Abort to cancel dialling 3 Press en to end the call Tip For international calls always use before the country code for best operation Press twice for the international prefix Making a call from the Phonebook 1 Press Name to open the phoneb
27. f the alarm or press Snooze to repeat the alarm after 9 minutes a ri LS 45 English Calendar l Press Menu scroll to and press OK 2 select one of the following options and press OK View Show tasks for the selected date Add task 1 Enter date for the task then press sw 2 Enter time for the task then press we 3 Enter subject 4 Press OK At the set date time an alert tone will be played and the task description will be shown on the display Press Silent to turn off the alarm or press Snooze to repeat the alarm after 9 minutes Jump to date Enter the date and press OK View all Select a task and press Options for the following options Edit 0 Edit the selected task Delete the selected task Delete all Delete all tasks Note The calendar will work even when the phone is switched off Do not press Yes to power on if wireless phone use is prohibited or when it may cause Interference or danger Calculator The calculator can perform basic mathematical operations 1 Press Menu scroll to ba and press OK 2 Enter the first number Use E to enter decimal points 3 Use the arrow buttons to select an operation x and press OK 36 English 4 Enter the next number and press OK 5 Repeat steps 2 4 as necessary Select and press OK to calculate the result FM radio The FM radio has a frequency range from 87 5 to 108 0 MHz and 9 preset channels Turning the radio on 1
28. functions to simplify use of the phone Press Menu scroll to gt and press OK Select General and press OK Select Block function and press OK Select each function you want to disable and press Off 5 Press Done to confirm a Network setup Your phone automatically selects your service provider s home network if this is within range If not within range you may use another network provided your network operator has an agreement that allows you to do so This is called roaming Contact your service provider for more information 1 Press Menu scroll to SP and press OK 2 Select General and press OK 3 Select Network setup and press OK 4 Select one of the following options and press OK to confirm New search Perform new search if connection Is lost Select network To view available network press Select network A list of available network operators Is displayed after a short delay Select desired operator and press OK Network mode To select another network select Network mode and then select one of the following options Network is selected automatically Network is selected manually Use Select network to select desired operator Services This menu may contain pre programmed services from your network provider Depending on network support and subscription 19 English 1 Press Menu scroll to SP and press OK 2 Select General and press OK 3 Select Services and press OK Torch Set the
29. g Query status Displays if call waiting is active or not Call divert You can divert calls to an answering service or to another phone number Set up which calls should be diverted Select a condition and press OK then select Activate Deactivate or Query status see Call waiting p 26 for each Press Menu scroll to gt and press OK Select Calls and press OK Select Call setup and press OK Select Call divert and press OK Select one of the following options and press OK Voice calls Diverts all voice calls Unreachable Diverts incoming calls if the phone is turned off or out of range No reply Diverts Incoming calls if unanswered Si If busy Diverts Incoming calls if the line is busy Cancel Do not divert calls diverts Call barring Your phone can be restricted to disallow certain types of calls Note A password is needed to apply Call barring Contact your service provider to get the password 2 English Press Menu scroll to SP and press OK Select Calls and press OK Select Call setup and press OK Select Call barring and press OK Select one of the following options and press OK Outgoing Press OK then select calls AII calls User can answer incoming calls but not dial out Internat calls User can not call international numbers Int except User can not call international numbers except to the home country associated with the SIM card RS Incoming Press OK then select
30. he one you want The dictionary will suggest words based on the keys you have pressed 1 To write the word Fred press KA EA Ki E Complete the word before looking at the suggestions 2 Use VIA to view the suggested words 3 Press Select and continue with the next word Alternatively press to continue with the next word If none of the suggested words are correct use manual input mode The icon on the top left of the display indicates the input mode Abc Sentence case with predictive text ABC UPPER CASE with predictive text abc lower case with predictive text Abc Sentence case ABC UPPER CASE abc lower case 123 Numerals English Call options During a call the selection buttons gt give access to additional functions Options left selection button A menu with the following options is displayed Hold single Hold retrieve the current call call Retrieve single End single End the current call same as call Mute Disable the microphone SSS SPK on right selection button Activates handsfree mode which allows you to speak without holding the phone Speak clearly into the microphone at a maximum distance of 1 m Use the side keys to adjust the loudspeaker volume Press SPK off to return to normal mode Note The handsfree function allows only one person at a time to talk Switching between talk listen is triggered by the sound of the person talking Loud noises music etc in th
31. input and press OK 4 Select one of the following options and press OK Manual tuning with or A Auto search Automatic station search with Se or mn Auto save Note This will overwrite all previously saved channels 1 Press Menu scroll to lt I and press OK 2 Select Options 3 Select Auto save and press OK to automatically install available radio stations in channels W K Torch Use of the built in torch 1 Press Menu scroll to ll and press OK to switch on the torch 2 Press Off to switch off the torch 38 English Note The torch will drain the battery very quickly Remember to turn off the torch after use See Torch p 20 how set the automatic switch off time Instructions for tte REMOTE USER Sending remote control commands by text message Activation must be set to On and the remote user must be entered in Number list on the Doro PhoneEasy 510 Menu Security gt Remote config All contacts sent to Doro PhoneEasy 510 by remote configuration are Stored in the Phone even if storage Is set to SIM 3 phone numbers for each contact El Mobile ar Home or E Office Note SMS format must be Command otherwise the SMS cannot be identified as a remote control command Parameters are the content you want to send and you must use sign to separate two parameters In tables P Parameters Setting a contact in the phonebook command Pi Pa Ps phonebook name mobile
32. mber and press OK Select Add to add more recipient or press Send to send 5 You can also modify the recipients by selecting one and press Options to Edit Delete Delete all Note If you choose to add multiple recipients you will be charged for each recipient maximum 10 For international calls always use before the country code for best operation Press twice for the international prefix Inbox Sent Outbox SMS unread hal SMS sent SMS read Neg SMS unsent 1 Press shortcut button or press Menu scroll to S and press OK 2 Select Inbox Sent Outbox and press OK 3 Select a message and press Read Use VIA to scroll the message up down 4 Press Options for the following options Send Send again to the same receiver 15 English Reply Type your reply then press Done Message is sent immediately Call Press OK to call the contact Delete Press Yes to delete the message or No to return Edit Edit the message then press Send Forward Forward a message Edit the message If desired then press Send Use number Displays all phone numbers contained in the message as well as the sender s number Select one of the displayed numbers and press Options for following options Call Call the selected number Save Save the number in the phonebook Send SMS Write a new SMS message Call log Received missed and dialled calls are saved in a combined call log 20
33. n text message This is an emergency message Please take appropriate actions alert m 1 This is an emergency message Please take appropriate actions You want to turn on the function Confirm with O alert c 1 You want to set the Signal type to low F alert S 1 Tip Remember to write down the positions you send This way it IS easier for you to later send changes Setting the one touch memories Se ee ae memorykey a Name number A key max length max length 40 20 memorykey b Name number B key max length max length 40 20 memorykey C Name number C key max length max length 40 20 41 English Example You want to set Jeff Jackson s mobile number in memory key A in Doro PhoneEasy 510 Martha Thomson in memory key B and Steve Lewis in memory key C memorykeyF a Jeff Jackson 0 00393939 memorykey b Martha Thomson 0 68991014 memorykey c Steve Lewis 0 09441819 Add task to calendar Command Pi e2 ps yyyymmdd hhmm note Date Time description of task max length 35 Example 1 You want to send a new calendar task to Doro PhoneEasy 510 It is for a dentist appointment in December 1 2010 at 10 30 task 20101201 1030 dentist appointment 42 English Troubleshooting Phone cannot be switched on Battery charge low Connect the power adapter and charge the battery for 3 hours Battery incorrectly Check the installation of the battery installed
34. nd press OK Select Time amp date and press OK Select Auto time and press OK Select On Off and press OK To set the phone to automatically update the time and date according to the current time zone select On Automatic update of date and time does not change the time you have set for the alarm clock or the calendar They are in local time Updating may cause some alarms you have set to expire Depending on network support and subscription AR Language The default language for the phone menus messages etc IS determined by the SIM card You can change this to any other language supported by the phone 1 Press Menu scroll to gt and press OK 2 Select General and press OK 3 Select Language and press OK 4 Scroll LV UM to select a language then press OK Start up wizard Use the Start up wizard to set some basic settings Press Yes to change Language Time amp date Ring tone Volume Text size or Themes Press No if you don t want to change Owner number The phone numbers assigned to your SIM card are saved in Owner number if this is allowed by the card To view edit or the numbers 1 Press Menu scroll to gt and press OK 2 Select General and press OK 3 Select Owner number and press OK see Phonebook p 12 on how to add names numbers To edit or delete an existing entry select It and press Options then select Edit or Delete and press OK 18 English Block function gt You can disable
35. o confirm or No to abort Delete all Select From SIM or From phone and press Select to delete all phonebook entries from the SIM card or phone memory Enter the phone code and press OK to confirm The default phone code Is 1234 Copy all Select From SIM and press Select to copy all phonebook entries from the SIM card to the phone memory Press Yes to confirm or No to abort Select From phone and press Select to copy all phonebook entries from the phone memory to the SIM card Press Yes to confirm or No to abort Send vCard Select Send by SMS and press OK to send the selected phonebook entry as a vCard via SMS Enter the phone number of the recipient Alternatively use the arrow keys VA to scroll through the phonebook or quick search by pressing the key corresponding to the first letter of the entry see Entering text 5 p Press OK to send 13 English ICE In Case of Emergency First responders can access additional information such as medical information from the victim s phone in case of emergency In the event of a trauma it Is critical to have this information as early as possible to increase the chances of survival All fields are optional but the more information provided the better 1 Press Menu scroll to a and press OK Select ICE and press OK then use A to scroll the list of entries 3 Press Edit to add or edit information in each entry see Entering text S p 7 Delete with Clear Press
36. old places When the unit warms up to normal temperature condensation can form on the inside which can damage the electronic circuits e Do not try to open the unit in any other way than that which is indicated here e Do not drop the unit Do not knock or shake it either If it is treated roughly the circuits and precision mechanics can be broken e Do not use strong chemicals to clean the unit The advice applies to the unit battery mains adapter and other accessories If the phone is not working as it should please contact the place of purchase for service Don t forget the receipt or a copy of the Invoice This product is guaranteed for a period of 12 months from the date of purchase In the unlikely event of a fault occurring during this period please contact the place of purchase Proof of purchase Is required for any service or support needed during the guarantee period This guarantee will not apply to a fault caused by an accident or a similar incident or damage liquid ingress negligence abnormal usage non maintenance or any other circumstances on the user s part Furthermore this guarantee will not apply to any fault caused by a thunderstorm or any other voltage fluctuations As a matter of precaution we recommend disconnecting the charger during a thunderstorm Batteries are consumables and are not included in any guarantee This guarantee does not apply if batteries other than DORO original batteries are used
37. one can be set to ask for the PIN code on startup Select one of the following options and press OK 32 English PIN code activated you need to enter the PIN code every time the phone Is started PIN code deactivated Warning if SIM card is lost stolen it IS unprotected Automatic You do not need to enter the PIN code when the phone is started the phone remembers it automatically If SIM card is moved to another phone lost stolen the PIN code needs to be entered to unlock Note You need to input the current PIN code to disable enable SIM lock Phone lock Select On Off and press OK to enable disable Note You need to input the current Phone code to disable enable Phone lock The default Phone code is 1234 Keypad lock Select one of the following options and press OK Auto keylock Select the time delay for automatic keypad locking Press OK to confirm Unlock mode select Single key to unlock the keypad with EY or Dual key to lock unlock with right selection button Name Unlock and J Press OK to confirm Remote configuration gt Allow persons that you trust usually a family member or friend to send information to your Doro PhoneEasy 510 You can receive phonebook contacts and contacts for speed dial keys calendar tasks and settings for the emergency button When activated you don t have to do anything It s the other person that sends information to you Select Remote config and press OK f
38. ook 2 Use the arrow buttons D A to scroll through the phonebook or quick search by pressing the key corresponding to the first letter of the entry see Entering text 5 Dr 3 Press Call to dial the selected entry or press Back Receiving a call 1 Press a to answer or press Silent to switch off the ring signal and then Reject to reject the call busy signal Alternatively press ea to reject the call directly 2 Press a to end the call Volume control Use the side buttons to adjust the sound volume during a call The volume level is indicated on the display If you use hearing aid or have hearing difficulties when using the telephone in noisy environment you can customize the phone s audio settings see Audio setup p 21 English Entering text Press a numerical key repeatedly until the desired character is shown Wait a few seconds before entering the next character Press Eg for a list of special characters Select the desired character with WA and press OK to enter it Use the side keys or D Un to move the cursor within the text Press E to cycle upper case lower case and numerals Press and hold J to change input language Entering text with predictive text In some languages you can use the Smart ABC eZiType input method which uses a dictionary to suggest words See Predictive text s p 28 on how to activate predictive text Press each key once even if the displayed character is not t
39. or the following settings Activation Select On to activate remote configuration and press OK 33 English On Remote configuration enabled Off Remote configuration disabled Number list You need to add the name and number of the people who are allowed to send information from their phone to your Doro PhoneEasy 510 1 Select Number list and press OK 2 Select Empty and press Add 3 Select Phonebook to add a contact from the Phonebook Alternatively press Manual 4 Press we 5 Enter the number and press OK Repeat until you have 5 contacts maximum To edit or delete an existing entry select It and press Options then select View Edit or Delete and press OK Fixed dial FDN You can limit calls to certain numbers saved on the SIM card The list of allowed numbers is protected by your PIN2 code Select On Off and press OK Enter PIN2 Press OK to confirm Press Add to enter the first allowed number Alternatively select an entry and press Options for the following settings Add Edit or Delete and press OK Enter PIN2 Press OK to confirm Note You can save parts of phone numbers For example if you save 01234 allows calls to all numbers starting with 01234 It Is possible to place an SOS call by entering the main local emergency number followed by e even when fixed dial is activated When fixed dial is activated you are not allowed to view or manage any phone numbers saved on the SIM card
40. press OK 2 select Display and press OK 3 Select LCD backlight and press OK 4 Select 15 sec 30 sec or 1 min and press OK Brightness You can customize the phone s brightness settings 1 Press Menu scroll to gt and press OK 23 English 2 Select Display and press OK 3 Select Brightness and press OK 4 Select Level 1 Level 3 and press OK Calls Voice mail If your subscription includes an answering service callers can leave a voice mail message when you cannot answer a call Voice mail IS a network service and you may need to subscribe to it first For more Information and for the voice mail number contact your service provider Press Menu scroll to gt and press OK Select Calls and press OK Select Voice mail and press OK Select Empty and press Add Select Phonebook to add a contact from the Phonebook Alternatively press Manual See Phonebook p 12 on how to add names numbers 6 Press OK To edit or delete an existing entry select it and press Options then select Edit or Delete and press OK a Call voice mail 1 Press Menu scroll to and press OK 2 Select Calls and press OK 3 Select Voice mail and press OK 4 Select Options and press OK 5 Select Call voice mail and press OK to call the voice mailbox Tip Press and hold shortcut button EE to call your voice mail Speed dial gt EN KE and the numerical keys El and A K can be used for Speed dialling
41. to discard changes Select Outbox to delete all messages in Outbox Press Yes confirm or No to discard changes Select Sent to delete all messages in Sent Press Yes confirm or No to discard changes Select Delete all to delete all messages at the same time Press Yes confirm or No to discard changes Emergency Settings for the Emergency button function 1 Press Menu scroll to Pad and press OK 2 select Emergency and press OK for the following settings Activation Select one of the following options and press OK 30 English To activate press and hold button for approximately 3 seconds or press 2 times within 1 second To activate press button 3 times within 1 second Emergency button disabled Number list The list of numbers that will be called when the Emergency button Is pressed 1 Select Empty and press Add 2 Select Phonebook to add a contact from the phonebook Alternatively press Manual See Phonebook p 12 on how to add names numbers 3 Press OK Repeat until you have 5 contacts maximum To edit or delete an existing entry select It and press Options then select Edit or Delete and press OK SMS The message to be sent to the contacts in numbers list when the Emergency button is pressed Activation Select one of the following options and press OK On The phone sends a text message before dialling Off The phone dials without sending a message first Message Press Edit and ent
42. u scroll to Pad and press OK 2 Select Sound and press OK 3 Select Extra tone and press OK 4 Select Warning and press On Off to enable disable 5 Select Error and press On Off to enable disable 6 Press Done to save Display Wallpaper You can select different display backgrounds 1 Press Menu scroll to gt and press OK 2 select Display and press OK 3 Select Wallpaper and press OK 4 Scroll 7 A to display available wallpapers 22 English 5 Press OK to confirm or Back to discard changes Text size You can customize the text size for messages and the phonebook 1 Press Menu scroll to gt and press OK 2 select Display and press OK 3 Select Text size and press OK 4 Select Normal or Large and press OK Idle display In standby mode the display can show clock only clock and the service provider or all information 1 Press Menu scroll to SP and press OK 2 Select Display and press OK 3 Select Idle display and press OK 4 Select Clock only Clock amp Operator or All info and press OK Themes You can select different themes to personalise the phone s texts and background 1 Press Menu scroll to gt and press OK 2 Select Display and press OK 3 Select Themes and press OK 4 Scroll 7 MA to select a theme 5 Press OK to confirm or Back to discard changes LCD backlight gt Select the delay time for the display backlight 1 Press Menu scroll to gt and
43. ur service provider such as weather or traffic conditions in a particular region For available channels and relevant channel settings contact your service provider Cell broadcast messages cannot be received when the device IS roaming Select Cell information and press OK for the following settings Function To turn information On or Off on off Read Press OK to read the message messages Languages Select language On Off and press Done Select from which channels you want to receive subscribe messages Use the options Subscribe Cancel subscription Add Edit and Delete to define your channels Reminder The SMS reminder alerts you once if you haven t checked your text message within 10 minutes from receipt If notification envelope is removed by pressing w no reminder will be heard 29 English Select Reminder and press On Off to enable disable Vibration The SMS vibration alert is several short vibrations that continues for either Short 4 seconds or Long 12 seconds Note If Alert type is set to Ring only the phone will not vibrate Delivery report You can select If you want the phone to notify you when your SMS has reached the receiver Select Delivery report and press OK Select On or Off to enable disable Press OK to save Note If you choose Delivery report On some operators will charge you for that message Delete Select Inbox to delete all messages in Inbox Press Yes confirm or No
44. vate Silent Headset When a headset is connected the internal microphone in the phone is automatically disconnected When receiving a call you can use the answer key on the headset cable if it has one to answer and end calls English Using a headset at high volume may damage your hearing Adjust the volume level carefully when using a headset SOS calls As long as the phone Is switched on it is always possible to place an SOS call by entering the main local emergency number for your present location followed by ea Some networks accept calls to emergency numbers without a valid SIM card Contact your service provider for more information Emergency button Always inform recipients in Number list that they are listed as your emergency contacts When an emergency call is activated the phone is pre set to handsfree mode Do not hold the device near your ear when the handsfree mode Is In use because the volume may be extremely loud The Emergency button allows easy access to contact your predefined help numbers Number list should you need help The Emergency function may need to be activated before use See Emergency F p 30 on how to activate as described or with 3 button presses how to enter recipients in the numbers list and how to edit the text message e Press and hold the Emergency button for 3 seconds or press It two times within 1 second The emergency call begins after a delay of 5 seconds In this tim
Download Pdf Manuals
Related Search