SATA - IDE CONVERTER User Manual
Contents
1. SATA IDE CONVERTER User Manual Introduction This Bridge Board is a converter solution for the Parallel Ultra ATA Device It has a standard 40 pin ATA port which can interface to IDE device hard disk CDROM DVD CD RW etc It accepts Serial ATA commands through the SATA interface from the host decodes the commands and converts them to parallel ATA commands to the device Response from the device through the parallel ATA bus are deciphered processed and converted to SATA protocol and send to the host The PATA to SATA 150 Converter supports the Serial ATA Generation l transfer rate of 1 5GB s 150MB s on the Serial ATA side and is compatible with Ultra ATA 133 on the parallel ATA side Features Overall Features Compatible with Ultra ATA 133 100 66 33 specifications Supports all types of ATATPI ATA 133 ATA 100 ATA 66 ATA 33 EIDE and IDE storage devices DVD DVD RAM MO CD ROM CD RW Hard Disk 100 hardware bridge converter to support PC and MAC environment Serial ATA Features Compliant with Serial ATA 1 0 specifications Supports Serial ATA Generation 1 transfer rate 1 5Gb s Hardware Installation 1 Connect the PATA to SATA 150 Converter to your IDE device please remind the direction of IDE port Plug the 4 PIN power cable to PATA to SATA 150 Converter Connect the 4 PIN power cable to your IDE device Connect a SATA cable to PATA to SATA 150 Converter and remember to p2. lug the other connector of the cable to your computer Notel IDE device must be set on Master Mode Note2 Please make sure that your PC is shut down during your hardware installation This PATA to SATA 150 Converter with your IDE device is not hot swap device and please shut down your computer before your want to connect this device
Download Pdf Manuals
Related Search