USER MANUAL - Kramer Electronics
Contents
1. 1 component 1Vpp 75Q Y Pb Pr on 3 RCA connectors Y Pb Pr 1 05Vpp on 759 AC coupling RETURN LOSS Y Pb Pr 1 25Vpp on 752 DC coupling VIDEO RESOLUTION SIN RATIO K FACTOR ISOLATION CROSSTALK 43dB 5MHz AUDIO Specifications OUTPUTS 1 stereo analog audio OdBu 1kQ 0 5V 75Q ona 3 5mm jack 1 digital S PDIF audio on an RCA connector MAX AUDIO INPUT LEVEL 4dBu on 50kQ AC coupling ANALOG MAX AUDIO OUTPUT LEVEL 4dBu on 1kQ DC coupling ANALOG AUDIO BANDWIDTH TD NOISE SAMPLE RATE CONVERSION RESOLUTION CONVERSION STORAGE TEMPERATURE HUMIDITY 10 to 90 RHL non condensing POWER CONSUMPTION 12V DC 140mA TP 45 RC 830mA TP 46N DIMENSIONS 12 cm x 7 2 cm x 2 8 cm 4 7 x 2 8 x 1 1 W D H WEIGHT 0 3kg 0 67lbs approx ACCESSORIES OPTIONS RK 3T 19 rack adapter Specifications are subject to change without notice at http www kramerelectronics com Video specifications are for 100m of CAT 5 UTP cable unless otherwise specified TP 46N Technical Specifications 13 LIMITED WARRANTY The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below Whatis Covered This limited warranty covers defects in materials and workmanship in this product What is Not Covered This limited warranty does not cover any damage deterioration or malfunction resulting from any alteration modification improper or unreasonable use or maintenance misuse2. abuse accident neglect exposure to excess moisture fire improper packing and shipping such claims must be presented to the carrier lightning power surges or other acts of nature This limited warranty does not cover any damage deterioration or malfunction resulting from the installation or removal of this product from any installation any unauthorized tampering with this product any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs or any other cause which does not relate directly to a defect in materials and or workmanship of this product This limited warranty does not cover cartons equipment enclosures cables or accessories used in conjunction with this product Without limiting any other exclusion herein Kramer Electronics does not warrant that the product covered hereby including without limitation the technology and or integrated circuit s included in the product will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used How Long Does this Coverage Last Seven years as of this printing please check our Web site for the most current and accurate warranty information Whois Covered Only the original purchaser of this product is covered under this limited warranty This limited warranty is not transferable to subsequent purchasers or owners of this product What Kramer Electronics will do Kramer Ele
3. in Section 4 3 LINE OUT RJ 45 Connector Connect to the LINE IN connector on an additional TP 46N Using a UTP cable with CAT 5 connectors at both ends the PINOUT is defined in Section 4 3 12V DC 12V DC connector for powering the unit TP 46N Overview gt 46N Connecting a Component UXGA Audio Distribution System The Component UXGA Audio Distribution System can be configured to operate in one of two video modes e Inthe UXGA mode a computer graphics source is connected to the input and transmitted to a display connected to the receiver see Section 4 1 e Inthe component video mode a component video source is connected to the input and transmitted to a TV set connected to the receiver see Section 4 2 The Component UXGA Audio Distribution System can be configured to operate in one of two audio modes e Inthe analog mode an analog audio source is connected to the input and transmitted to an acceptor connected to the receiver see Section 4 1 e Inthe digital audio mode an S PDIF audio source is connected to the input and transmitted to a digital acceptor connected to the receiver see Section 4 2 The modes of the system are determined by setting the VIDEO SELECT and AUDIO SELECT switches on the TP 45 or TP 45RC Whatever modes are set at the transmitter the video and audio signals are sent to the receiver and to any additional cascaded receivers There is no signal conversion a component input cannot be sen
4. power wall adapter that is provided with the unit Warning Disconnect the power and unplug the unit from the wall before installing 2 3 Getting Sta Recycling Kramer Products The Waste Electrical and Electronic Equipment WEEE Directive 2002 96 EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled To comply with the WEEE Directive Kramer Electronics has made arrangements with the European Advanced Recycling Network EARN and will cover any costs of treatment recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility For details of Kramer s recycling arrangements in your particular country go to our recycling pages at Attp www kramerelectronics com support recycling ted Overview The TP 46N is a twisted pair receiver for component video YUV or computer graphics video and unbalanced stereo or S PDIF audio signals The TP 45 TP 45RC transmitters convert audio and video to a twisted pair signal and the TP 46N converts the twisted pair signal back into audio and video signals By selecting the required video input signal the TP 45 or TP 45RC with the TP 46N can constitute either a component video Y CB PB CR PR or a UXGA video audio transmitter receiver system The term UXGA used throughout this user manual implies VGA resolutions up to and exceeding UXGA The TP 46N does not convert the vid
5. transmitting the signal to an additional receiver e 12V DC power About the Power Connect Feature The Power Connect feature applies as long as the cable can carry power This feature is available when using STP cable and the distance does not exceed 50m 164ft on standard CAT 5 cable For longer distances heavy gauge cable should be used CAT 5 cable is still suitable for the video audio transmission but not for feeding the power at these distances For units which are connected via RJ 45 connectors make sure that the shield of the STP cable is connected to the metal casing of the connectors on both ends of the cable For units which are connected via terminal block connectors the shield of the STP cable must be connected to a ground terminal on the units at both ends use the ground terminal of the power supply connection if necessary For a CAT 5 cable exceeding a distance of 50m separate power supplies should be connected to the transmitter and to the receiver simultaneously Shielded Twisted Pair STP Unshielded Twisted Pair UTP We recommend that you use Shielded Twisted Pair STP cable and stress that the compliance to electromagnetic interference was tested using STP cable There are different levels of STP cable available and we advise you to use the best quality STP cable that you can afford Our non skew free cable Kramer BC STP is intended for analog signals where skewing is not an issue In cases where there is ske
6. 0 300027 Rev 3
7. IED WARRANTIES ON THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW Other Conditions This limited warranty gives you specific legal rights and you may have other rights which vary from country to country or state to state This limited warranty is void if i the label bearing the serial number of this product has been removed or defaced ii the product is not distributed by Kramer Electronics or iii this product is not purchased from an authorized Kramer Electronics reseller If you are unsure whether a reseller is an authorized Kramer Electronics reseller please visit our Web site at www kramerelectronics com or contact a Kramer Electronics office from the list at the end of this document Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form Kramer Electronics thanks you for purchasing a Kramer Electronics product We hope it will give you years of satisfaction For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your questions comments and feedback Web site www kramerelectronics com KRAMER E mail info Okramerel com SAFETY WARNING Disconnect the unit from the power e supply before opening and servicing 290
8. KRAMER ELECTRONICS LTD USER MANUAL MODEL TP 4GN CGomponent UXGA Audio Receiver P N 2900 300027 Rev 3 mlb E TP 46N Quick Start Guide H This guide helps you install and use your product for the first time For more detailed information go to http www kramerelectronics com support product_downloads asp 5 to download the latest manual or scan the AR code on the left Step 1 Check what s in the box E TP 46N ComponentUXGA 1 Quick Start sheet Audio Receiver a Rubber feet per device A 1 Power supply 12V DC Step 2 Install the TP 46N Mount the machine in a rack using the RK 3T rack adapter or place on a table Step 3 Connect the inputs and outputs Display with speakers To another TP 46N 12V DC i 9 LINE Our UXGA Our LINE ANALOG SIPDIF Y Cs Ps CRIPR EQ Liik AUDIO 0 0000 8 38 SP oms J UO owns oN _ Component UXGA Audio Receiver TP 46N Display with speakers Step 4 Connect the power Connect a 12V DC power supply to the transmitter or receiver and plug the A supply into the mains electricity Step 5 Operate the TP 46N Adjust the LEVEL and EQ as needed Contents 1 Introduction 2 Getting Started 2 1 Achieving the Best Performance 2 2 Safety Instructions 2 3 Recycling Kramer Products 3 Overview 3 1 About the Power Connect Feature 3 2 Shielded Twisted Pair STP Unshielded
9. THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY Some countries districts or states do not allow the exclusion or limitation of relief special incidental consequential or indirect damages or the limitation of liability to specified amounts so the above limitations or exclusions may not apply to you Exclusive Remedy TO THE MAXIMUM EXTENT PERMITTED BY LAW THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A CONSUMER PRODUCT UNDER THE MAGNUSON MOSS WARRANTY ACT 15 U S C A 2301 ET SEQ OR OTHER APPICABLE LAW THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU AND ALL IMPL
10. Twisted Pair UTP 3 3 Defining the TP 46N 4 Connecting a Component UXGA Audio Distribution System 4 1 Connecting the System in UXGA Mode 4 2 Connecting the System in Component Video Mode 4 3 Wiring the CAT 5 LINE IN LINE OUT RJ 45 Connectors 5 Technical Specifications Figures Figure 1 TP 46N Component UXGA Audio Receiver Figure 2 Distribution System UXGA Mode Figure 3 Distribution System Component Video Mode Figure 4 CAT 5 PINOUT N 6 0101 BR OUONNN Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unique creative and affordable solutions to the vast range of problems that confront the video audio presentation and broadcasting professional on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Our 1 000 plus different models now appear in 11 groups that are clearly defined by function GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Matrix Switchers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters and GROUP 11 Sierra Products Thank you for purchasing the Kramer TOOLS TP 46N Component UXGA Audio Receiver that uses existing UTP cabling to create an efficient fast and u
11. ctronics will at its sole option provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty 1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete 2 Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product 3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products this product must be insured during shipment with the insurance and shipping charges prepaid by you If this product is returned uninsured you assume all risks of loss or damage during shipment Kramer Electronics will not be responsible for any costs related to the removal or re installation of this product from or into any installation Kramer Electronics
12. eo signal format Thus computer graphics sources must be routed to computer graphics outputs Similarly component video sources must be routed to component video outputs e If UXGA is selected the TP 45 or TP 45RC receives a UXGA and audio signal and transmits it over the CAT 5 cable to the UXGA output on the TP 46N receiver e f component video is selected the component video signal is transmitted over the CAT 5 cable to the COMP outputs on the TP 46N receiver e The analog audio or S PDIF digital audio as selected via the audio SELECT button is transmitted together with the video signal over the CAT 5 cable to the TP 46N receiver The audio signal is distributed simultaneously to the analog or digital audio outputs Additional TP 46N units can be connected via the TP 46N LINE OUT CAT 5 connector to extend the range of the output signals You can connect up to three additional TP 46N units adding a total cable length of up to 300 meters The video quality may be reduced if further units are connected The TP 46N Component UXGA Audio Receiver features e VUV output on 3 RCA connectors and a computer graphics output on a 15 pin HD F connector e Digital audio output S PDIF on an RCA connector and a stereo analog output on a 3 5mm mini jack 3 1 3 2 e The Power Connect feature where the TP 46N can power the TP 45 or TP 45RC over the same CAT 5 cable see Section 3 1 e EQ and LEVEL controls e ACAT 5 output for
13. nal from the component video source is transmitted via the CAT 5 cable decoded and converted to component video and outputted on the Y CB PB CR PR OUTPUTS RCA connectors to the component video acceptor If you cannot connect the power to both the TP 45 and TP 46N connect it to the TP 46N only If more than one TP 46N is connected connect the power to each TP 46N unit 7 Connect the LINE OUT RJ 45 connector on the TP 46N to a second TP 46N unit optional connect the required outputs to the second TP 46N 8 Similarly you can connect the LINE OUT RJ 45 connector on the TP 46N to additional TP 46N units g E o gt a g kl DVD Player Figure 3 Distribution System Component Video Mode TP 46N Connecting a Component UXGA Audio Distribution System EU 4 3 Wiring the CAT 5 LINE IN LINE OUT RJ 45 Connectors This section defines the CAT 5 pinout using a straight pin to pin cable with RJ 45 connectors Note that the cable ground shielding must be connected soldered to the connector shield EIA TIA 568B Figure 4 CAT 5 PINOUT PIN Wire Color 1 Orange White 4 Bue 6 Green rs erom 12 45 78 36 TP 46N Connecting a Component UXGA Audio Distribution System 5 Technical Specifications Video Specifications INPUTS 1 CAT 5 line In on an RJ 45 connector video audio OUTPUTS 1 CAT 5 line Extension on an RJ 45 connector video audio 1 VGA UXGA 1Vpp 752 on a 15 pin HD connector
14. ncluttered environment for e Presentation and multimedia applications e Long range graphics distribution for schools hospitals security and stores e Security and military applications 2 1 2 2 Getting Started We recommend that you e Unpack the equipment carefully and save the original box and packaging materials for possible future shipment e Review the contents of this user manual Go to http www kramerelectronics com support product downloads as to check for up to date user manuals application programs and to check if firmware upgrades are available where appropriate Achieving the Best Performance To achieve the best performance e Use only good quality connection cables we recommend Kramer high performance high resolution cables to avoid interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables e Do not secure the cables in tight bundles or roll the slack into tight coils e Avoid interference from neighboring electrical appliances that may adversely influence signal quality e Position your Kramer TP 46N away from moisture excessive sunlight and dust This equipment is to be used only inside a building It may only be connected to other equipment that is installed inside a building Safety Instructions Caution There are no operator serviceable parts inside the unit Warning Use only the Kramer Electronics input
15. onnector to the UXGA acceptor for example a display The ANALOG AUDIO 3 5mm mini jack to the analog audio acceptor for example speakers Alternatively you can connect a digital audio acceptor to the S PDIF RCA connector or you can connect both TP 46N Connecting a Component UXGA Audio Distribution Systen 5 Connect the LINE OUTPUT RJ 45 connector on the TP 45 to the LINE IN RJ 45 connector on the TP 46N via CAT 5 cabling see Section 4 3 6 Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity on both the TP 45 and the TP 46N not shown in Figure 2 The signal from the UXGA source is transmitted via CAT 5 cable decoded and converted at the UXGA OUT 15 pin HD F connector to the UXGA acceptor If you cannot connect the power to both the TP 45 and TP 46N you can connect the power to the TP 46N alone see Section 3 1 7 If required connect the LINE OUT RJ 45 connector on the TP 46N to an additional TP 46N TP 46N unit Computer Graphics Source Figure 2 Distribution System UXGA Mode TP 46N Connecting a Component UXGA Audio Distribution System EE 4 2 Connecting the System in Component Video Mode To configure a TP 46N component UXGA audio distribution system in the component video mode using up to 300ft 100m of UTP cabling as shown in Figure 3 do the following 1 On the TP 45 or TP 45RC connect the following A component video source f
16. or example a DVD player to the Y Cb Pb Cr Pr RCA connectors A digital audio source to the S PDIF RCA connector Alternatively you can connect an analog audio source 2 On the TP 45 use the SELECT buttons as follows Release the video SELECT button to choose the component video input Press the audio SELECT button to choose S PDIF Release the audio SELECT button to choose analog audio 3 On the TP 45RC use the SELECT buttons as follows Momentarily press the VIDEO SELECT button The UXGA LED turns off when the component video input is selected Momentarily press the AUDIO SELECT button to toggle between the S PDIF and analog audio inputs The analog audio LED lights when analog audio is selected 4 On the TP 46N connect the following The Y CB PB CR PR RCA connectors to a component video acceptor for example a plasma display The S PDIF RCA connector to the digital audio acceptor for example the audio input on the plasma display Alternatively you can connect an analog audio acceptor or you can connect both 5 Connect the LINE OUTPUT RJ 45 connector on the TP 45 TP 45RC to the LINE IN RJ 45 connector on the TP 46N via CAT 5 cabling see Section 4 3 10 TP 46N Connecting a Component UXGA Audio Distribution Systen 6 Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity on both the TP 45 TP 45RC and the TP 46N not shown in Figure 3 The sig
17. t to a computer graphics output nor can a digital audio input be sent to an analog audio output Connecting a Component UXGA Audio Distribution System 7 4 1 Connecting the System in UXGA Mode To configure a TP 46N component UXGA audio distribution system in the UXGA mode using up to 300ft 100m of UTP cabling as shown in Figure 2 do the following 1 On the TP 45 or TP 45RC connect the following An UXGA source for example the graphics card on a laptop to the UXGA 15 pin HD F connector An analog audio source to the ANALOG AUDIO 3 5mm mini jack or a digital audio source to the S PDIF RCA connector for example using a Kramer C GMA GMA cable VGA 15 pin HD M with audio jack to VGA 15 pin HD M with audio jack Cables are not supplied The complete list of Kramer cables is on our Web site at http www kramerelectronics com 2 On the TP 45 use the SELECT buttons as follows Press the video SELECT button to choose the UXGA input Press the audio SELECT button to choose S PDIF Release the audio SELECT button to choose analog audio 3 On the TP 45RC use the SELECT buttons as follows Momentarily press the video SELECT button The UXGA LED lights when the UXGA input is selected Momentarily press the AUDIO SELECT button to toggle between the S PDIF and analog audio inputs The analog audio LED lights when analog audio is selected 4 On the TP 46N connect the following The UXGA OUT 15 pin HD F c
18. will not be responsible for any costs related to any setting up this product any adjustment of user controls or any programming required for a specific installation of this product How to Obtain a Remedy under this Limited Warranty To obtain a remedy under this limited warranty you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you For a list of authorized Kramer Electronics resellers and or Kramer Electronics authorized service providers please visit our web site at www kramerelectronics com or contact the Kramer Electronics office nearest you In order to pursue any remedy under this limited warranty you must possess an original dated receipt as proof of purchase from an authorized Kramer Electronics reseller If this product is returned under this limited warranty a return authorization number obtained from Kramer Electronics will be required You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product If itis decided that this product should be returned directly to Kramer Electronics this product should be properly packed preferably in the original carton for shipping Cartons not bearing a return authorization number will be refused Limitation on Liability THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR
19. wing our Unshielded Twisted Pair UTP skew free cable Kramer BC XTP may be advantageous and UTP cable might also be preferable for long range applications In any event when using UTP cable it is advisable to ensure that the cable is installed far away from electric cables motors and so on which are prone to create electrical interference 3 3 Defining the TP 46N Figure 1 defines the TP 46N Component UXGA Audio Receiver ANALOG SIPDIF Y C8 PB CRIPR 6 9 0 UTPUTS an Outputs J UXGA Out Figure 1 TP 46N Component UXGA Audio Receiver Feature Function ANALOG AUDIO Connect to the stereo analog audio acceptor aera 5mm Mini Connector S PDIF RCA Connector RCA Connector Connect to the digital audio acceptor Y RCA Connector Connect to the component video acceptor CR PR RCA Connector RCA Connector LEVEL Trimmer Adjusts the output signal level Use a screwdriver to carefully rotate the trimmer adjusting the appropriate level EQ Trimmer Adjusts the cable compensation equalization level Use a screwdriver to carefully rotate the trimmer adjusting the appropriate level 8 LINKLED Lights when receiving the correct input signal 9 ON LED Lights when receiving power 10 UXGA OUT 15 pin HD Connect to the UXGA acceptor Connector LINE IN RJ 45 Connector Connect to the LINE OUT RJ 45 connector on the TP 45 or TP 45RC Using a UTP cable with CAT 5 connectors at both ends the PINOUT is defined
Download Pdf Manuals
Related Search