PS25-55 in order
Contents
1. Powershred Personal Series Operating Instructions Mode d emploi Instrucciones de funcionamiento Bedienungsanleitung Bedieningsinstructies Istruzioni sul funzionamento Models PS25 PS30 Plus PS55CC PS40 PS45 DM 3 PS35 ad O O E E 00000 Safety Instructions e Read and save these instructions Follow all warnings and instructions marked on the product Always turn off and unplug the machine before moving cleaning or conduct other than normal operation Operate shredder from the power source indicated on the serial label or power supply If you are not sure of the type of power available consult your dealer or a power company Power cord should be easily accessible because it serves as the disconnect switch If the power cord is damaged call the number listed under Contact for Service e If the shredder does not come with a wastebasket be certain the basket you select provides a stable base for the shredder Tall or narrow baskets may be top heavy and unstable Keep loose objects jewelry ties long hair away from shredder CAUTION Do not insert aerosol cleaners or lubricants into or around the machine Some agents may combust causing serious injury Empty wastebasket frequently Do not place shredder near water over a radiator or a heat register Do not rest anything on the power cord Do not place machine where people will walk on the cord The use of an extension cord is not reco2. 0 x 419 x 254 mm 3 6 Ko PS35 6 m min 438 x 375 x 254 mm 4 2 kg de 20 fom 21 2 x15 x5 7 Ibs PS50 6 m min 63 5 x 380 x 127 mm 3 2 kg 20 fpm 15 x16 1 2 x10 8 Ibs DM 3 PS45 6 m min 438 x 375 x 254 mm 4 2 kg 12 fom 17 1 4 x 14 3 4 x10 3 6 m min 438 x 375 x 254 mm 4 3 kg Limited Warranty Fellowes Manufacturing Company warrants the cutting cylinders of all Fellowes shredders to be free from defects in material and workmanship for five years from the date of purchase by the original consumer Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for one year from the date of purchase by the original consumer If any part is found to be defective during the warrant period your sole and exclusive remedy will be repair or replacement at Fellowes option and expense of the defective part This warranty does not apply in cases of abuse mishandling or unauthorized repair ANY IMPLIED WARRANTY INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE S HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product This warranty gives you specific legal rights You may have other legal rights that vary from state to state For more detail or to obtain service under this warranty please contact Fellowes Customer Serv
3. ation Technology Equipment EMC Standard Severity Level Performance Criteria EN 55014 Table 1 amp 2 N A EN 55104 2 N A EN 61000 3 2 Class A N A EN 6100044 Level 2 B EN 6100045 Level 2 B EN 610004 2 EN 55104 T 6 1 B EN 610004 11 EN 55104 1 6 7 C ENV 50141 EN 55104 T 6 3 A Itasca Illinois USA EE April 30 1999 i Anthony Storie 0 0000 Consumer Helpline 1 800 33 11 77 1 800 665 4339 001 800 234 1185 1 800 955 0959 00 800 1810 1810 Fellowes Locations 011 613 93303211 011 31 3473 77988 905 475 6320 33 0 2 99 22 71 22 49 0 5131 4977 0 39 0 071 730041 011 81 3 5496 2401 82 2 3464 2884 48 22 837 7356 65 6221 3811 44 0 1302 836836 Fellowes 1789 Norwood Avenue Itasca Illinois 60143 1095 630 893 1600 Customer Service 1 800 945 4545 http www fellowes com Australia Benelux Canada France Germany Italy Japan Korea Poland Singapore United Kingdom Tullamarine Vic Vianen NL Markham Ont Paris Garbsen Han Camerano AN Tokyo Seoul Warsaw Singapore Doncaster S Yorks Rennes l V 1999 Fellowes Printed in U S A Part No 35206
4. e ON 1 position to start cutting system PS30 Plus r Retum the power switch to the OFF 0 position to stop cutting system PS35 PS40 PS50 Follow instructions for sheet capacity See Table A PS50 Plus Depress the power switch to the ON 1 position to activate the standby mode PS55 Green Ready light will come on if model has indicator lights PS55CC Shredder automatically starts when paper is placed in the entry and stops when DM 3 PS45 finished shredding Cleaning Unplug the unit from the wall before cleaning All Models Housing can be cleaned with a cloth dampened with a mild soap and water solution Sheet Capacity and Usage Do not exceed recommended sheet capacity for your model Folding paper to fit the entry increases the thickness and recommended capacity may be exceeded Clips and staples increase the thickness and may decrease sheet capacity US 20 Paper 64 GSM 80 GSM 80 GSM Model Sheets per Pass Sheets per Pass Sheets per Pass Sheets per Pass 120V 50Hz 100V 50Hz 230V 50Hz 240V 50Hz PS25 PS25 Plus PS 30 PS30 Plus PS35 amp PS40 PS50 PS50 Plus PS55 non 100 120V PS55 100 120V DM 3 PS45 TABLE A Different paper weights and electrical currents will affect capacity 00 0000 00000 Safety Maintenance of PS55CC The PS55CC cross cut shredder creates small particles that if allowed to accumulate cause the shredder to jam Follow thes
5. e simple precautions to significantly reduce the likelihood that particles will accumulate and to keep your cross cut shredder operating at peak efficiency Do not allow the basket to overfill The power of this shredder will compress paper particles into the basket even when it is full The life of your shredder may be reduced if the cutting system continues to operate with particles packed around it Reverse the shredder often Reversing helps the shredder flush out small cut particles Empty basket if it is full before reversing Oil the cutters When Every second or third time you empty the basket If the shredder s cutting capacity is diminished e If the cutting cylinders stop with a squeak or a rubbing sound after power is removed How Use Powershred Lubricant 35250 or a suitable alternative with an extension nozzle Alternatives can be 3 in 1 or Sewing Machine Oil Oil must be non flammable material and a non degreaser Do not use a can spray Accelerants are combustible See order form in this manual Squeeze the lubricant across the full width of the cutters and then turn the machine on and run the cutting system forward for a few seconds Since cross cut machines have auto start it will be necessary to block the photo eye with a piece of paper in order to run the cutting system forward Then depress the reverse button and run the cutting system for a few seconds Repeat the procedure Safety of PS55CC Do n
6. ice at 1 800 955 0959 Monday through Friday 8 AM 5 PM Central Standard Time For specific instructions on obtaining service under this warranty on machines purchased outside the USA contact the appropriate location listed in the Contact for Service section of this instruction manual Warrantor Fellowes Manufacturing Company Declaration of Conformity Fellowes Manufacturing Company Doncaster Road Kirk Sandall Doncaster South Yorkshire DN31H England declares that the product Models PS25 PS30 PS35 and PS40 with or without the suffix Plus conforms with the requirements of the Low Voltage Directive 73 23 EEC and the Electromagnetic Compatibility Directive 89 336 EEC and the following harmonized European Normes EN Standards and IEC Standards Safety EN60950 Information Technology Equipment EMC Standard Severity Level Performance Criteria EN 55014 Table 1 amp 2 N A EN 61000 3 2 Class A N A Itasca Illinois USA i o April 30 1999 7 Anthony Storrie Declaration of Conformity Fellowes Manufacturing Company Doncaster Road Kirk Sandall Doncaster South Yorkshire DN31H England declares that the product Models PS50 and PS55 with or without the suffix Plus conform with the requirements of the Low Voltage Directive 73 23 EEC and the Electromagnetic Compatibility Directive 89 336 EEC and the following harmonized European Normes EN Standards and IEC Standards Safety EN60950 Inform
7. ition 0 Rapid switching can create force that will damage your shredder PS55CC only 5 See Maintenance of PS55CC Cross Cut Shredder Parts Identification Wastebaskets not included with some models 1 Power Jack or Power Cord 4 Paper Entry 2 Power Switch 5 Wastebasket 3 Housing 1 6 Indicator Lights on select models PS25 PS30 PS50 PS35 PS40 PS45 PS55 PS55CC DM 3 Overload Protection Important N ote This shredder is protected by a builtin thermal overload This paper shredder is not intended to shred high volumes device that serves to protect the motor from overuse of paper Please refer to the specifications for the When continuous shredding is conducted for an extended recommended daily usage and sheet capacity of this period of time the shredder will automatically tum itself shredder Please note that if the paper is wider than the off to cool down When shredding is automatically entry and you fold it to fit the paper thickness increases stopped allow the unit to stand for about 30 minutes and the recommended capacity may be exceeded before using it again 00000 00000 Specifications Shred Size Entry width 9 230 mm PS55CC Power Source 120V 60Hz N America 5 32 x 4 5 3 9mm x 20mm 240V50Hz Australia 230V 50Hz U K Europe All others 100V 50HZ Japan 7 32 5 8mm strip Power Cord 6 Feet 1 9 meters Model Shredding Speed Mei PS30 Plus 6 m min 38
8. mmended Do not service this product yourself An opened cover may expose you to dangerous voltage points or other risks and will void manufacturer s warranty Do not exceed recommended sheet capacity or usage See Sheet Capacity and Usage Table A Do not shred continuous forms Do not shred labels transparencies glossy paper newsprint plastic or cardboard Keep out of the reach of children and pets ever insert your hand or fingers into feed opening e Practice caution when shredding paper that contains paper clips and staples Shredder is intended for paper only although clips and staples will not harm the cutting system nor void the 5 year cutter warranty but the added thickness may decrease sheet capacity Installation e Where applicable plug power cord into jack on the unit Position sh ly on basket All Models osition shredder securely on baske Plug power cord into a standard AC outlet with the appropriate power requirements as Stated on the serial number label adhered to the bottom of the shredder PS25 Fits wastebaskets from 13 1 4 16 1 2 337 419mm wide PS30 e Position shredder securely over basket and extend adjustable arm so shredder solidly rests PS50 on basket edges Operation e Follow instructions for sheet capacity See Table A Follow instructions for sheet capacity See Table PS25 Plus ds Position paper over entry PS30 a Depress power switch to th
9. ot operate PS55CC without the basket it was shipped with Do not use without the safety flap Injury may result Do not attempt to defeat the safety interlock switch Paper Jams 1 Immediately retum power switch to OFF 0 position 2 Depress power switch to the REVERSE R position until the jammed paper has been fully removed from the cutter 3 DO NOT PULL ON PAPER Damage to the drive system could occur 4 If the REVERSE R function will not operate when pressed the internal overload protection device has been activated Release the power switch from the REVERSE R POSITION wait 15 seconds and repeat 5 If the machine jams in reverse unplug the unit and cut all excess paper off the top and bottom of the machine before repeating the jam clearing procedure 6 Shred smaller quantities See sheet capacity Table A Model When operating this product you must use the enclosed power supply Failure to do so will void the manufacturer s warranty and may damage the unit North America Australia Europe Japan UK Red light capacity exceeded 1 Empty the basket if it is full DM 3 2 Reverse out the paper being fed into the shredder PS45 3 Divide the paper being shred into smaller packets that are within the stated PS55 capacity of the shredder 4 If the jam persists slowly move the shredder s power switch back and forth PS55CC between FORWARD 1 and REVERSE R always stopping for a moment in the OFF pos
Download Pdf Manuals
Related Search