PIR-SD User`s Manual
Contents
1. 22lbs 10kgs or less lt GOMA standby 1O0mA active 110 240VAC 5VDC 1 0ACUSB 4 3 x2 4 x1 7 0 5 Ibs 27A 12V battery alkaline 3Oft Up to 2 years Stop Motion Detection and Manual Record 433Mhz Up to 300ft in open area Up to 100ft indoors 10 C to 50 C 14 F to 122 f lt 85 RH2. Refer all servicing to qualified service personnel The PIR SD is designed to be and acts as a theft deterrent This device cannot offer complete protection for your home or business Like all practical systems it has limitations and it could be disable by a skilled intruder We suggest that you avoid relying solely on PIR SD to protect your property but used it as part of a comprehensive security solution Conditions Please read the following messages to make sure your working environment is suitable e The temperature should be kept between 10 C and 50 C 14 F to 122 F The relative humidity should be kept between 20 and 80 e Avoid putting the product in places where temperature or humidity may change rapidly e Keep it dry dustless and avoid exposure directly in sunlight e Keep product away from heat sources such as electric heater It might influence the normal operation of the product if used at the fringe range of normal temperature Please turn off the power when not in use e Please obey the local government s environment protection policy Safety Instructions e Please read these instructions before using the product This product is neither waterproof nor dust proof therefore it cannot be used outdoors or in adverse environment e Please adopt original DC power supply to avoid causing device damage or electric shock or fire e Unauthorized dismantlement of the device or replacement of device par
3. implied or otherwise regarding this product and specifically disclaims any warranty for merchantability or fitness for a particular purpose The exclusion of implied warranties is not permitted in some states and the exclusions specified herein may not apply to you This warranty provides you with specific legal rights There may be other rights that you have which vary from state to state Limitation of Liability The liability of SecurityMan Inc arising from this warranty and sale shall be limited to a refund of the purchase price In no event shall SecurityMan be liable for costs of procurement of substitute products or services or for any lost profits or for any consequential incidental direct or indirect damages however caused and on any theory of liability arising from this warranty and sale These limitations shall apply not withstanding any failure of essential purpose of any limited remedy For Tech Support Call 888 977 3777 SecurityMan 4601E Airport Drive Ontario CA 91761 USA Tel 909 230 6668 Fax 909 230 6889 Email info securitymaninc com Website www securitymaninc com Copyright 2012 by SecurityMan v1 0 Table of Contents Introduction Features Important Operating Restrictions Conditions Safety Instructions Package Contents Product Basics PIR SD Remote Control Set Up Set the Date and Time Adding and Cancelling Remote Control Adding Remote Control Cancelling Remote Control Operation Using PIR
4. SD Motion Detection Recording Emergency Recording Stop Recording New File Alert SD Full Alert Memory Full Playback Recorded Video Integrating with Air Alarm Series Adding PIR SD Remote to the Alarm Host Cancelling PIR SD Remote from the Alarm Host Adding PIR SD Motion Detection to the Alarm Host Cancelling PIR SD Motion Detection from the Alarm Host Enabling Video Recording Disabling Video Recording Specifications OBOON NNO UM UND Introduction Thank you for purchasing SecurityMan PIR SD The PIR SD is a color camera with SD recorder hidden inside a PIR motion detector This covert motion detector camera blends perfectly into almost any home or business environment where an alarm system might be present and can also be intergraded with any of our SecurityMan DIY Wireless Home Alarm Systems providing you with both security and discreet monitoring capabilities So whether you re looking to expand your wireless security system or just looking for a covert hidden camera the PIR SD will fit your needs Features e PIR motion sensor with color camera and SD recorder SD card not included e Works independently or can be integrated with any SecurityMan Air Alarm series wireless alarm systems e Up to 300ft clear line of sight wireless transmitting distance between the PIR SD and alarm host 1OOft indoors e 1 minute video clip per motion detection event e Records up to 12 hours of video footage on a 32 GB SD card e SD card
5. SD and the Alarm Host Adding PIR SD Motion Detection to the Alarm Host Make sure the host is DIS ARMED and press Step 1 PRGM SET Password default is 888 ENT 70 ENT XX ENT Input zones 11 15 for XX indicating the 2nd defense line dedicated for PIR sensors The Learn light will appear solid blue red Step 2 Provoke the motion sensor on the PIR SD 2 consecutive times to add Cancelling PIR SD Motion Detection from the Alarm Host Make sure the host is DIS ARMED and press PRGM SET Password default is 888 ENT 71 ENT XX ENT Input zones 11 15 for XX indicating the zone number that the PIR SD were paired to and using code 71 to remove the PIR SD will remove all up to 4 sensors sensor that was paired to that zone The Learn light will appear solid blue red The alarm host will beep twice and the Learn light will flash once to indicate the PIR SD motion detection is successfully cancelled from the Alarm Host Enabling Video Recording To enable video recording please follow steps 1 and 2 below Enabling video recording allows the PIR SD to start recording video footages whenever the alarm system are triggered by 24hrs devices by other sensors that are pre paired to the Alarm Host or by the PIR_SD Step 1 Press the Study button on the back of the PIR SD CPIR SD will beep once Step 2 On the Alarm Host Press ESC Password default is 888 ENT ES
6. for you to use to access and view the stored files Click on the Open Folder to View Files option to opena folder view as illustrated Double click on the GetSysTime folder double click on the GetSysTime exe file located on the SD card and then click on the Get System Time pop up to synchronize your computers time to the PIR SD Make sure the computer you are using has the current time and date If itis anewly formatted SD card please copy and paste the GetSysTime exe time date setup file from other SD source or download it from our web site http www securitymaninc com page_id 575 Look for PIR SD under the software column and click on the link to download the GetSysTime file GetSys Time exe Tianxin Media Get System Time 1 0 0 1 After clicking on the Get System Time pop up a confirmation pop up will appear letting you know that the time and date were set successfully Click OK to close the window and disconnect the PIR SD from your computer NOTE A SysTime bin file will be created indicating that the date and time was set correctly DVR systema time is set successfull Please disconnect USE to upgrade DVR system time a Mount the PIR SD s mouting bracket in the desired location and secure it to the wall using the screws provided use the green dry wall inserts when applicable as shown below so of IMPORTANT NOTICE Due to a 2 3 sec delay time to rec
7. full notification e Audible and visual new file alert notification e Can easily be armed disarmed via remote control alarm host keypad or phone call when integrated with a SecurityMan Air Alarm system e One touch remote control manual record for emergency situations e Easy PC playback using a PC card reader or direct connect via mini USB port Important This guide provides important information on the use and operation of your PIR SD Please read all the information carefully prior to using the product for the best performance and to prevent any damage injuries or misuse of the device s Customers are entitled to have read through this complete user s Manual before using the PIR SD Any unapproved changes or modifications will void your warranty Please ensure to have a complete understanding of the following restrictions Please keep in mind the PIR SD has a 2 sec delay time to record after an event occurred To compensate for the 2 sec delay time to record and proper use we recommend to install this product about 15ft away from the intended monitoring object As part of our disclaimers it is the customers responsibilities to be aware of the 2 sec delay time to record before use Operating Restrictions When using this product the safety precautions below must be taken to avoid possible legal liabilities and damages Retain and follow all product safety and operating instructions Observe all warnings in the product operating
8. instructions To reduce the risk of bodily injury electric shock fire and damage to the equipment observe the following precautions PLEASE NOTE that under certain circumstances audio video recording may be PROHIBITED by law This device should be used only in compliance with all applicable federal state and local statutes e DO NOT place this product near any medical equipments Radio waves might potentially cause breakdown of electrical medical equipment This product should be placed at least one foot away from any heart pacemaker Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance e DO NOT use this product to violate one s privacy Monitoring one s private activities without consent is illegal and this product is not designed and manufactured for these purposes e DO NOT use this product for any illegal activities SecurityMan shall not be responsible for any consequences of illegal conducts made by users e DO NOT put the plastic package bags in reach of children or babies Young children can choke on these items if they put them into their mouths e DO NOT plug the AC adapter into the outlet in improper situations Plugging in an AC adapter with wet hands might cause electric shock e Plugging in the AC adapter unsteadily might cause fire or electric shock e DO NOT cover the AC adapter when it is connected to an outlet place the adapter near heaters or put it on the floor whic
9. the signal is not received from the remote control within 20 seconds Please repeat steps 1 2 above if this should happen Cancelling Remote Control Press and hold down the Study button for 5 seconds and then release the PIR SD will beep for 3 seconds to indicate the remote control is sucessfully cancelled from the PIR SD NOTE Since the same command are used to cancel the remote control from the PIR SD and disable the video recording from the Alarm Host when integrating it is important to remember to enable the video recording back or pair video recording to the Alarm Host whenever cancelling the remote control from the PIR SD Operation Using PIR SD Motion Detection Recording To Activate Motion Detection recording simply press any of the Motion Record buttons on the remote control and the PIR SD will beep once to indicate that motion detection has been activated in stand by mode Once activated and motion has been detected after the 8 seconds delay time to exit the red LED will turn red to indicate recording The PIR SD will record a 1 minute video clip per motion detection event Note The PIR SD has a built in 8 second exit delay that allows the user to exit the detecting area after activating motion detection without triggering the PIR to record Motion detection recording files will continue to accumulate if events re occurs within the 1 minute recording period Motion Record Emergency Recordi
10. C Password default is 888 ENT The PIR SD will beep 5 times indicating the video recording has been successfully enabled PIR SD will beep 2 times to indicate failure please repeat steps 1 2 above IMPORTANT NOTICE Enabling video recording when integrating with SM 8808T or SM 8808E Air Alarm Hosts will have a 2 sec or 3 sec delay time to record respectively due to processing speed Please note that it is normal for the PIR SD to have a 2 3 sec delay time to record It is very important and our recommendation to mount the PIR SD 15ft from the intended target for proper monitoring view and proper recording Please be sure to thoroughly test the recording and camera angle before fixing the PIR SD Note Study mode will automatically turned off if inactive for more than 20 seconds During Alarm Host series 40 sec exiting delay time the PIR SD will continue to record if motion is detected Disabling Video Recording Make sure the host is DIS ARMED and press Press and hold down the Study button on the back of the PIR SD for 5 seconds then release and the PIR SD will beep for 3 seconds to indicate video recording is successfully disabled NOTE Since the same command are use to remove the remote control from the PIR SD and disable the video recording from the Alarm Host please pair the remote control back to the PIR SD whenever disabling video recording from the Alarm Host After the PIR SD has been successfully added to t
11. SecurityMan PIR SD User s Manual PIR Motion Sensor with Hidden Color Camera SD Recorder and Remote Control Copyright 2012 This manual is furnished under license and may be used or copied only in accordance with the terms of such license Except as permitted by such license no part of this publication may be reproduced stored in a retrieval system or transmitted in any form or any means electronic mechanical recording or otherwise including translation to another language or format without the prior written permission of SecurityMan The content of this manual is furnished for informational use only is subject to change without notice and should not be construed as a commitment by SecurityMan SecurityMan Inc assumes no responsibility or liability for any errors or inaccuracies that may appear in this book FCC Information Notes on FCC s Consistent Statement of Information This product meet the requirements specified in Part 15 of FCC Regulation Operation rests with the following two conditions 1 The equipment should not cause any harmful interference 2 The equipment must receive and process any interference including any possible interference caused by operation mistakes After testing the product we confirm that the camera complies with the provision for class C digital equipment in the 15th part in FCC regulations and the receiver complies with the limitations for class B digital equ
12. h is equipped with a heater The above mentioned operation might cause fire or incidents e DO NOT use it aboard please abide by the airway s provision It might influence communication aboard and the flying apparatus if departing from the airway s regulation This will result in accident possible death and severe physical hurt e DO NOT disassemble or repair the camera or other relevant peripheral equipments by yourself Improper disassembly might cause damage to the product or the peripheral equipment e DO NOT put the camera in quaky paces The camera may be unstable or out of operation if installed improperly Such installation may also cause breakdown e DO NOT use the camera in complex environment the obstruction of stumbling block will affect the electromagnetic wave and influence the receiving range Wall tree and other stumbling block might absorb reflect the electromagnetic wave and influence the receiving range DO NOT use the camera in the places which are covered with metal The around metal such as elevator and cabin might shield the electromagnetic wave and result in inability to receive signals e DO NOT use the camera near aggressive chemicals e DO NOT place the product near any strong magnetic objects e DO NOT disassemble the product DO NOT shake or strike the product DO NOT attempt to service the product yourself as opening or removing covers may expose you to dangerous voltage or other hazards
13. he Alarm Host series the PIR SD should function in the same manners as the motion sensor only PIR SD has the video recording feature If the PIR SD is triggered by motion in Armed mode it will alarm the Host and at the same time the Alarm Host will send a signal to the PIR SD to start the video recording process Moreover if any of the input sensing device s that are pre programmed to the Alarm Host triggered at anytime to alarm the host the PIR SD will process video recording Note To review the recorded video footages please follow Playback Recorded Video section above Specifications PIR sensor camera Remote Control Wireless General Image Sensor Resolution Recording Speed Camera Lens Camera Viewing Angle Recording Video Format Recording Time and Size LED Indicator USB Port Video Storage SD slot PIR Detecting Area Min Illumination Pet Immunity Power Consumption Power Supply Dimensions Gross Weight Operating Power Remote Control Distance Battery Life Time Buttons Frequency Transmission Distance Operating Temperature Operating Humidity 1 6 5 CMOS color 640x480 3Ofps 8mm H 60 degree V 35 degree AVI One minute per motion detection event 4OMB minute 32GB 12hrs of video 2 LED lights Red power record alarm Blue SD full or new REC file 2 0 data transfer to PC or USB power adapter SD card up to 32GB SD Class 4 or higher 110 degree 26ft 8M Lux F1 2
14. ipment in Part 15 of FCC regulation The product generates applies and emits radio waves It might cause harmful interferences to wireless communication if not be installed and used following the description of the manual The product may cause interference in residential area and the customer should take remedies to eliminate the interference on their own costs If the product causes any harmful interference to wireless equipment or disturbs the receiving of TV signals Cit can be identified by turning on and off the product you can solve the trouble by following methods e Readjust the product or put it in another place e Extend the distance between the equipment interfered and the product e Refer to dealers or experienced radio electrician for help Warranty SecurityMan warrants that this product will be free from defects in title materials and manufacturing workmanship for one year from the date of the purchase or otherwise specified on the package If the product is found to be defective then as your sole remedy and as the manufacturer s only obligation SecurityMan will repair or replace the product This warranty is exclusive and is limited to this product This warranty shall not apply to products that have been subjected to abuse misuse abnormal electrical or environmental conditions or any condition other than what can be considered normal use Warranty Disclaimers SecurityMan Inc makes no other warranties express
15. ng Press the Emergency Record button on the remote control at any time to start an immediate Emergency recording event Once activated the red LED will become solid while recording and the PIR SD will record a 1 minute video clip per emergency recording event Emergency Record Stop Recording To stop emergency recording or Deactivate Motion Detection recording simply press the Stop Record button on the remote control at any time the PIR SD will beep twice to indicate that recording has been stopped Stop Record New File Alert After deactivating motion detection or emergency recording by default the New File Alert featured e Blue LED will stay solid for 5 seconds e PIR SD will beep 5 times To disable the PIR SD from beeping 5 times Make sure the PIR SD is disarmed Press both the DISARM ARM buttons once simultaneously and the PIR SD will beep 3 times to disable the PIR SD from beeping 5 times on New File Alert notification Press both the DISARM ARM buttons once simultaneously again and the PIR SD will beep 4 times to enable the PIR SD to beep 5 times on New File Alert notification NOTE To manually mute the new file alerts press the Stop Record button 3 times rapidly within 5 seconds or simply activate motion or manual recording New File Alert notification will always displayed a solid blue LED for 5 seconds regardless of the beeping New File Aler
16. ord we recommend to mount the PIR SD about 15ft from the intended monitoring object for proper recording Slide the PIR SD over the mounting bracket and push it downward to secure Adjust the PIR SD as necessary until you reach a desired viewing angle as shown below Finally connect the PIR SD to the USB power adapter and a solid red light will appear in the motion detection window for 30 seconds as illustrated below After the red light disappeared the PIR SD is ready to use IMPORTANT NOTICE 1 Please avoid unplugging the USB power from the PIR SD to prevent the system Date and Time from resetting 2 To playback the recorded files we recommend to remove the SD card from the PIR SD to playback on a media card reader due to important notice 1 above 3 Since the PIR_SD does not have infrared to monitor in dark area we would recommend to use night light or lamp stand in dark area Adding and Cancelling Remote Control Adding Remote Control 1 While plugged into the power outlet press and release the Study button located on the back of the PIR SD The PIR SD will beep once after being pressed indicating that it is in study mode 2 Press any one of the four buttons on the remote control 2 consecutive times and the PIR SD will beep 5 times to indicate the remote control has been successfully added to the PIR SD Note The PIR SD will beep twice to indicate failure during the adding process and exit the study mode if
17. rd from the PIR SD to playback Using method 1 to connect the PIR SD via USB cable for playback is strongly NOT recommended Once the PIR SD is powered on if for any reasons the power were to be unplugged from the PIR SD the Date and Time will auto reset to default date time When this occurs please remember to setup the Date and Time before the next operation Integrating with Air Alarm Series To fully integrate the PIR SD system with the Air Alarm Host series there are three components that needs to be added Adding the PIR SD remote control Not a must the PIR SD motion detection sensor and the video recording on off as shown below To avoid using multiple remote controls when integrating the PIR SD to the Air Alarm host series please add the PIR SD remote control to the Air Alarm host series or vice versa Adding PIR SD Remote to the Alarm Host Step 1 Press PRGM SET Password system default 888 ENT 70 ENT tOO ENT the Learn light will appear solid blue red Step2 Press any 1 of the 4 buttons on the PIR SD remote twice consecutively to add Cancelling PIR SD Remote from the Alarm Host Stepol Press PRGM SET Password system default 888 ENT 71 ENT OO ENT to cancel NOTE Please reference the Air Alarm series user s manual as needed on how to add remote controls Adding the PIR SD remote to the Alarm Host series is not a requirement only pair them if you want to use one remote to control both the PIR
18. t notification SD Full Alert Memory Full The Blue LED will start to flash continuously whenever the SD card becomes full Please remove the SD card from the PIR SD and back up all recorded events to a PC or Laptop to free up space NOTE The Blue LED will also start to flash continuously whenever the SD card is not present Please insert an SD card into the SD card slot The SD Full notification flashes whenever there are 1 minute or 60MB of the free capacity left for system buffering The PIR SD system does not have an overwrite feature Playback Recorded Video You can playback recorded files directly from the PIR SD when connected to a PC or directly from the SD card by inserting the card into your computers card reader To playback recorded video on a PC 1 Remove the SD card from the PIR SD by gently pushing on the SD card allowing it to pop out from the SD card slot 2 Insert the SD card into an SD card reader not included connected to your PC your PC should load the SD card as anew Removable Drive 3 When prompted select the Open folder to view files option to view its contents you should see two folders labeled SYSTEM and VIDEO Open the VIDEO folder to view a list of all the recorded events Once inside the video folder you can double click any of the recorded AVI files and the video will begin playing in your default AVI media player NOTE To playback video footages we recommend to remove the SD ca
19. ts is forbidden The manufacturer will not be responsible for any loss arising from such actions e Do not put the device into fire oven or microwave oven in order to avoid explosion e As a result of version changes the user manual may be different from the actual product Please take the actual product as the standard Package Contents SD card not included 1x PIR SD w Bracket 1x Remote Control 1x USB AC Adapters P 1x USB Cable Screws Plectrum for Pairing 2x Warning Stickers User s Manual Product Basics PIR SD Front Back Sensor Window Study Button Mini USB Power USB SD Slot Power Socket Detecting LED 1 Mounting Base Camera Remote Control Stop Record button Stop Deactivate Motion Detection and Emergency Recording Emergency Record Motion Record button Start Activate Motion Detection Recording Emergency Record button Start Emergency Record 1 minute clip Set Up Set the Date and Time Insert an SD card note included face up into the SD slot located on the right hand side of the PIR SD as illustrated below E IMPORTANT NOTICE The PIR SD required an SD card to be inserted into the SD slot in order for the PIR SD to function as a motion detector recorder Connect the PIR SD to your PC or Laptop using the USB cable provided as illustrated below L MT Once connected an Auto Play pop up window will appear as shown below providing various programs
Download Pdf Manuals
Related Search