Home

manual

image

Contents

1. Please avoid looking into the flash directly A WARNING Danger of crashing crushing burning and fire due to device toppling over The powerpack weighs approx 3 1 kg the charger approx 0 48 kg the ring flash approx 3 1 kg and the flash approx 0 74 kg The modeling lamp the flash tube and the reflector can heat up to 240 C Ensure that the device is always kept in a tilt and skid resistant position and stored securely Keep out of reach of children and animals They could knock over the device Avoid placing cables where they could be tripped over The device could be knocked over Only mount the device on a tripod that is designed for the weight and dimensions of the device See Technical specifications A WARNING Danger of electric shock burn hazard Please note that the device is still connected to the supply voltage when it is switched off Only when you disconnect the device from the powerpack supply voltage by unplugging the power cord it is really de energized Switch off the device when it is not in use Switch off the device before assembly and maintenance and disconnect from power supply by unplugging the power cord and removing the battery Discharge the device before maintenance measures Protect your device against accidental power on Cut off voltage supply when not in use for a longer period of time by unplugging the power cord and removing the battery A WARNING Da
2. strap on the powerpack Please read these instructions carefully before using your device for the first time It includes everything you need to know to avoid physical injuries and damages Please pay attention to all safety notes in this instruction manual Please keep this manual safe If you are selling or leaving the device to another person please ensure to hand this manual over as well How to understand this instruction manual Symbols on the device C This symbol means that your device meets the safety requirements of all relevant European Directives This symbol means that your device must be disposed of at local disposal areas es p 1 2 Symbols in this manual Symbol Meaning A Indicates the handling and consequences of safety notes A WARNING Indicates a hazardous situation which if not avoided may result in a serious injury or death A CAUTION Indicates a hazardous situation which if not avoided may result in minor or moderate injury NOTE Indicates potential material damage and other important information regarding your device Important Safety Notes A WARNING Risk of retina damage The flash light could damage the retina leading to the loss of vision if the flash is trigged in close distance to persons or animals Please do not trigger a flash in close distance to the eyes of persons or animals Please ensure that the distance between persons and animals is at least 2m
3. 00 1 powerpack 1 flash 1 transport case 1 battery 1 power supply 1 12V car cable O O O O 0 0 1 carrying bag with shoulder strap 1 sync cord remote trigger instruction manual O O O e Article walimex pro Flash GXB 400 GXB 600 o 1flash o 1 protective cap o 1 handle o Instruction manual e Article walimex Ringblitz GXR 400 GXR 600 o ring flash o 1 handle o Instruction manual Please check if the scope of delivery is undamaged NOTE If the scope of delivery is incomplete or damaged please contact info foto walser de or our service hotline with the telephone number 49 84 32 9489 0 We reserve the right to make technical and optical modifications in the course of product improvement 4 4 1 4 2 Operation of the device 4 3 Overview of device elements walimex pro Powerpack Ta 7m OU a DW Powerpack Connecting socket for flash devices Ready display Test button Photo cell Sync socket Battery compartment with battery Acoustic signal on off switch Output regulator Display 5 On off switch Overview of device elements walimex pro Flash GXB Series 12 3 4 5 7 10 N OoN A W N Flash Standard reflector Flash tube Modeling lamp Release lever standard reflector On off switch modeling lamp Locking screw tilt angle Overview of device elements walimex pro Ring Flash GXR Series S Ring flash II Lamp Ill Handle IV Connectin
4. FOTO WALSER SPrPEZIALV ERS AN D Gewerbering 26 86666 Burgheim Tel 49 84 32 9489 0 Fax 49 84 32 9489 8333 E mail info foto walser de www foto walser de walim PX oro Copy of Instruction Manual Portable Ring Flash Set GXR 400 GXR 600 Portable Flash Set GXR 400 GXR 600 Flash Head for GXB 400 GXB 600 Ring Flash GXR 400 GXR 600 a a a a Da Content How to understand the instruction Manual ssessssssesesesrererrressrreress 3 1 1 Symbols n the OSV ICE sessen 3 1 2 Symbols in this manual sesessssssssesssserssrrrrssrrrsrrrrerrrrssrreresrrresene 4 Important safety OCC S wees se ctssiag creases sodenncs deacescabraneseheeamiasaenanosainees 4 Unpack and Check device c ccseccccessecccceesececeeseceeeeneceeeeeeceeeeneeeeeas 8 Operation Of the device cccccccessececcsecceeeseceeeesececeueceeeeeceesenes 10 4 1 Overview of device elements walimex pro powerpack 10 4 2 Overview of device elements walimex pro flash GXB 10 4 3 Overview of device elements walimex pro ring flash GXR 11 QUICK Start guide cece ceeeccccessececeesececeeeecceeeescceeauecessusecesseneceeseees 11 Prepare powerpack fOr OPeration ccccsssecccsseccecesecceeeeseceeeeneees 12 6l Charge a CUO IY secies E 12 6 2 Flash GXB SEriES ene eer 12 6 3 Ring Flash GXR SerieS ccccccssseccceseceecescceeeeseceseeeeceeeeneeeeeas 13 Connect flash to powerpaCK ssesseeses
5. age DC 12V Power supply via powerpack DC12V Cable length approx 160cm Dimensions LxWxH approx 17x17x10cm Reference to declaration of conformity Battery Herewith Foto Walser GmbH amp Co KG declares that the device Radio Remote Trigger conforms to the basic requirements and the remaining corresponding regulations of the directive 1999 5 EG The declaration of conformity can be requested at the following address info foto walser de merano 20 21
6. device on and off e For check trigger device with the test button on the powerpack or on the radio remote trigger e Trigger flash according to the prepared method of flash trigger See Prepare and adjust flash trigger 13 Solve problems Problem Possible cause Solution Device is switched on Battery is notor not Charge exchange but shows no function sufficiently battery charged defective Flash shows function Powerpack or flash Contact Foto Walser but triggering a flash is device is defective customer service not possible Flash tube is broken Replace flash tube if needed with electrically qualified person Maintenance of the device 13 1 Continuous inspection and maintenance of the device 11 Transportation and storage of the device e Switch off device See Switch device on and off e Allow for device to cool down completely A WARNING Danger of fire due to hot device components Allow for device to cool off completely e Demount connecting cables e Clean the device if necessary See Cleaning of the device e Put the device and all demounted elements into the original Styrofoam packaging and transport and store them according to the requirements in the technical specifications See Technical specifications 16 What you should do Check all cables and plugs for damages If damaged A WARNING Danger of electric shock and fire due to short circuit Have the device charger repaired by an electrician imm
7. e each use ensure that the camera is mounted safely Check all locking screws Connect flash to powerpack A Connecting socket for flash devices B On off switch e Switch on device See Switch device on and off e Unscrew protective caps e Plug connecting cable of the flash into the connecting socket of the powerpack 14 9 1 9 2 Switch device on and off Switch device on Set main switch to I ON The display lights up when the adjusted flash output is reached The READY indicator lights up Switch off device Set main switch to O OFF All lights go out Adjusting the device Adjust flash output You can adjust the flash output of the flash heads steplessly from 1 1 full output to 1 8 using the output regulator A Sync socket B Output regulator Prepare and adjust flash trigger Prepare flash trigger by camera NOTE Please pay attention to the manual of the camera manufacturer about flash synchronization 1 Plug sync cable into connecting socket for the sync cable on the end of the device 2 Plug other end of the sync cable into the X socket of your camera 15 Prepare flash trigger with a radio receiver 12 NOTE Pay attention to the user manual of the radio trigger manufacturer Plug cable of the radio receiver into the connective socket 3 5mm for the sync cable on the device Connect radio transmitter to hot shoe of camera 10 Trigger flash e Switch on device See Switch
8. ediately 17 13 2 Cleaning the device Device component ItemNumber A WARNING Replacement Flash Tube GXB 600 17244 Danger of bursting flash tube Replacement Ring Flash Tube GXR 400 17245 Ensure not to touch the flash tube accidentally with bare hands Replacement Ring Flash Tube GXR 600 17246 A WARNING Battery for GXR GXB 3000mAh 17247 Danger of electric shock Use exclusively the cleaning supplies as specified Never allow for the device to get in touch with wetness or water 16 Disposal and environment protection A Always unplug power cord before cleaning the device Remove battery l l l Please dispose of your device free of charge at a local disposal area Please Device component pay attention to the disposal notes of the battery Casing Remove light and persistent stains with microfiber cloth Modeling lamp flash Dab off with dust brush or dry soft cloth tube NOTE Do not clean the modeling lamp and flash tube with water Even small residues on the lamps can cause the lamps to burst Reflector Remove stains with microfiber cloth 14 Accessories and options You can find extensive accessories for your walimex pro studio flash in our webshop 15 Spare parts Device component ktemNumber Replacement Flash Tube GXB 400 17243 18 19 Output GXB 400 600 400Ws 600Ws Flash tube plug in can be replaced by the user rowemack DSSS Dimensions LxWxD approx 25 5x17x7cm Operating volt
9. g cord to the powerpack V Holding rail for adjustment of height III VI Holding rail for attachment to tripod and adjustment of depth VI V IV Quick start guide NOTE The detailed instruction for the following operations can be found in the respective chapters in this instruction manual Maintain the order of the following operating steps when using the device for the first time to avoid damaging the device A WARNING Please pay attention to the safety notes in the respective chapters throughout operation Charge insert battery Mount demount standard reflector flash Connect device to power supply insert battery Switch on device Adjust modeling lamp Adjust flash output Adjust acoustic standby signal Prepare flash release Mount device to a tripod optional O ee ee S 11 6 1 6 2 Prepare powerpack for operation Charge battery A WARNING Pay attention to the safety notes from pages 4 8 A Power cord B 12V car cable C Power supply unit D Battery e Open the battery compartment lid on the powerpack e Pull the battery from the shaft of the powerpack e Connect your power supply unit to the electrical outlet and connect the plug to the battery Note Compare the local power network with the connected load of the device If the values differ please contact info foto walser de or Tel 49 8432 94890 e The battery is being charged e Assoonas the battery is charged the LED on
10. nger of electric shock fire through short circuit A short circuit could be caused by defective cables and due to moisture or wetness among other causes A short circuit can heat up the conductors resulting in the melting of their insulation or the conductors themselves This could lead to fire Please use exclusively the original cables which are provided with the device They are tuned for your device and guarantee the necessary safety for you and your device Do not operate the device with wet hands or feet Clean the device exclusively as described in this instruction manual Ensure that cables and conductors are not damaged Damage could be caused due to heat impact chemical influence or due to mechanical impacts such as rubbing bending tearing rolling over or nibbling animals Prevent your device from falling In the case of falling please have an electrician check the device before switching it on again If your device is damaged or if you notice a burning smell Disconnect the power supply immediately by unplugging the power cord and removing the battery Never operate your device with a damaged casing defective reflector defective modeling lamp defective flash tube or a damaged power cord Do not open the device Never repair the device on your own Have the device repaired exclusively by an electrician Please follow this instruction manual for maintaining your device Please only use spa
11. re parts which are conform to the required specifications See Technical specifications A WARNING Danger of fire by overheating The device can overheat if you operate it with mounted protection cap or with covered ventilation slots The device itself or easily inflammable materials in close distance could catch fire Do not operate the device with mounted protection cap Do not cover the ventilation slots of the device during operation Remove easily inflammable materials from the surroundings of the device Please exclusively use spare parts which are conform to the required specifications See Technical Specifications A WARNING Danger of fire due to hot device components The modeling lamp and flash tube could heat up to 240 C and the reflector up to 75 C Easily inflammable materials could catch fire if they get in contact with hot device components Do not cover the ventilation slots of the device during operation Remove easily inflammable materials from the surroundings of the device A WARNING Danger of burning on hot device components The modeling lamp and flash tube could heat up to 240 C and the reflector up to 75 C Do not touch device elements during use and during the cooling down phase Allow for device to cool down for 30 minutes before beginning assembly or maintenance measures A WARNUNG Danger of cutting and splitting due to breaking modeling lamp or breaking or b
12. sesesrresssreresrreresreresrreresrrrssene 14 Switch device on and Off aescisssrrsrcssciioirenn karei een ii a 15 Adjusting the device neesssesesersereresurereureresursererererunrerureresenrersrerens 15 9 1 Prepare flash OUTPUT ssiraininesscsiens aa 15 9 2 Prepare and adjust flash triQQer ccscccccsssccceessececeeseeeeeeeeces 15 TESEU A A E 16 Transport and store GOVICE sessrrnteresrirrenrirern isaten 16 Soe MODICI eara n one 17 Maintenance of the CeVICC cccccccssscccceesececeesecceeeeeceeeeeseceseeneces 17 13 1 Continuous inspection and maintenance of the device 17 13 2 Cleaning Of the CEVICE cccccceseccccssseceeeseeeceeececeeeeeeeeeeeeeeees 18 Accessories and ODLIONS marenea 18 DPED oa E T seurancrsurennbiandeeesans 19 Disposal and environment ProtectiON cccccsseccccssscceeeeseceeseseees 19 Technical specificatiOniS aesssesrissesriin 20 1 1 We would like to thank you for your confidence and wish you much joy and success with your GXR GXB series The walimex pro GXR GXB series was developed specifically for the ambitious beginner and for the professional user The walimex pro GXR GXB series is extremely well suited for mobile use f r studio portrait person nude and product photography among others The main features of your device are as follows ideal on location when you have to work network independently removable battery block with battery charger carrying
13. the power supply unit switches from red to green Flash GXB Series Mount and demount reflector A WARNING Danger of bursting of flash tube Ensure not to accidentally touch the flash tube with bare hands 12 A WARNING Danger of burning on reflector modeling lamp and flash tube Let the device cool down for approx 30 minutes ll A Release lever B Tripod holding fixture e Switch off device See Switch device on and Off e Allow for device to cool off e Demont reflector e Push back release lever and hold down e Insert reflector into the openings of the device e Turn reflector clockwise until it notably locks into place e Let go of release lever 6 3 Ring Flash GXR Series A A Locking screws for height adjustment B Locking screw for depth adjustment C Locking screw for tripod and camera fixation C 13 e For adjusting the height please open the corresponding locking screws 8 e Adjust the device to the desired height e Tighten the locking wheel e For adjusting the depth please open the corresponding locking screws e Adjust the device to the desired depth e Tighten the locking wheel e in order to mount the device on the tripod and your camera open the corresponding locking screw Take your tripod or camera and tighten the locking wheel A WARNING Only mount the device on a tripod that is designed for the weight and dimensions of the device See Technical specifications A WARNING Befor
14. ursting flash tube Even small residues of skin oil on the flash tubes can lead to the splitting of the flash tube due to the high heat impact during operation Broken glass can hurt eyes and skin Treat the modeling lamp and flash tube carefully to avoid them from breaking Do not touch the flash tube with bare hands Use a clean cloth or clean gloves Avoid touching the flash tube accidentally when mounting or changing accessories A WARNING The powerpack contains a rechargeable Ni MH battery Please pay attention to the safety and disposal notes in the manual and on the battery Keep children away from the powerpack Use exclusively the charger of the GXR GXB series for charging the battery Ideal environmental temperature 0 40 Battery can get hot Allow for it to cool off before you recharge it Protect from moisture and wetness To ensure an optimal battery life charge the battery even when you are not using it every 3 months After completing the charging process remove the battery power supply Dispose of the battery at the manufacturer or a local disposal point Only use the appropriate batteries for the powerpack Unpack and check device 1 Please unpack the device carefully NOTE Keep the packaging for later storage and transport of the device Please check if the scope of delivery is complete e Article walimex pro Ring Flash Set GXR 400 GXR 600 Article walimex pro Flash Set GXB 400 GXB 6

Download Pdf Manuals

image

Related Search

manual manual manualslib manuale digitale manual car manual transmission manual of state funds manual arts high school manual therapy manual timesheet manual definition manual muscle testing manual wheelchair manual lawn mower manual labor manual for courts martial manually register devices with autopilot manually update your device drivers windows manualidades manual muscle testing grades manual therapy cpt code manual digital manual blood pressure cuff manual transfer switch manual transmission cars for sale manual handling

Related Contents

GT15-J61BT13形CC-Link通信ユニット取扱説明書    User`s Manual  Liebert® LBS Controller™ for Liebert NX™ 225-600kVA  50 WDG - CDMS, Inc    Diamond Multimedia 7790PE51G AMD Radeon HD7790 1GB graphics card  取扱説明書 - 三菱電機  Pelco C2953M-B User's Manual  HP Pavilion 15-p060ne  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.