User Manual
Contents
1. Pleaseconfirm if the installation is correct e Please confirm if the RJ45 cable order is in accordance with the EIA TIA568A or 568B industry standards Refer to page 7 e The maximum transmission distance is depends on the signal source and cable quality do not exceed the maximumtransmission distance e Please replace a normal device with a faulty one to checkifthe device is broken e Ifthe problem still exists please contact supplier Limited Warranty A LIMITED ONE 1 YEAR WARRANTY AND EXCLUSIONS Manufacturer warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Manufacturer is free of defects in materials and workmanship under normal and proper use for one 1 year from the purchase date Manufacturer s only obligation is to correct such defects by repair or replacement at its option if within such one 1 vear period the product is returned prepaid with proof of purchase date and adescription of the problem This warrant excludes and there is disclaimed liability for labor for removal of this product or reinstallation This warranty is voided if this product is installed improperly or in an improper environment overloaded misused opened abused or altered in any manner oris not used under normal operating conditions or not in accordance with any labels or instructions There are no other implied warranties of any kind including merchantability and fitness or2. Unit 5 Checkiftheinstallationis correct and device is good make sure all the connections are reliable and power for the system 6 Make sure every network device has power supply andis working normally Table 1 The test data in Table 1 based onthe test method in Application Diagram shown above 100m Te 300m loadCapacityw 8 91 rv w 400m 500m toadCapacityw 45 8 Picture 1 100m 300ft pog Switch 54V DC Power Technical Specifications M EPOC POE 100K EPOC POE 100 SV EPOC POE 100 IPC Application Location Host Server Side Camera Side Powered by From PoE switch or Power Supply re ie EPOC POE 100 SV BONNE LEUR PIN through coaxial cable Voltage Range Power Consumption Power Voltage EPOC Port 07100Mbps Ethernet Port 10 100Mbps Coaxial Cable 500m 1600ft max Network Cable 400m 1300ft max Transmission bandwidth changes with transmission distance refer to Table 1 and Picture 1 PoE Power Supply Support End span and Mid span PoE IN OUT Port One indicates PoE switch or DC power status RJ45 yellow one indicates Ethernet signal transmission RJ45 green EPOC Port Indicates signal transmission RJ45 yellow green 1a Contact Discharge 3 Level ESD Protection 1b Air Discharge 3 Level Per IEC61000 4 2 ns Specifications are subject to change without notice Transmission Distance LED Status Indicator Troubleshooting g e
3. a particular purpose butif any implied warranty is reguired by the applicable jurisdiction the duration of any such implied warrant including merchantability and fitness of ora particular purpose is limited to one 1 year Manufacturer is not liable for incidental indirect special or consequential damages including without limitation damage to or loss of use of any equipment loss sales or profits or delay or failure to perform this warranty obligation The remedies provided therein are the exclusive remedies under this warranty whether based on contract tort or otherwise www AAS com tw CAUTION Failure to read this notice may result in damaging the camera or device in which the warranty will be voided due to installation error When using anytype of RJ45 jack powered balun a Cable Tester must be used to ensure proper connection Many individuals can make RJ45 connections easily however mistakes can be made When making connections for powered baluns make sure to test the connectivity a nd ensure proper alignment on both sides Cable Tester When using passive or active baluns the alignment of the cable is imperative to the success of the operation Use a Cable Tester because itis a very simple easyto find tool that can save a huge headache For example if one of the video wires accidentally gets crimped into the power side andthe powered balunis then hooked upto the camera both the camera and the balun have jus
4. g to use this product Specifications and appearance are subject to change without notice Copyright O 2014 AAS Technology N 7 www AAS com tw R201501 V06 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the productor on its packaging indicates that this product shall not be treated as household waste Instead itshall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product N Caution M This product has beentested for conformance to safety regulations and requirements However like all electronic equipment this product should be used with care Please read and follow the safety instructions to protect y
5. ourself from possible injury andto minimize the risk of damage to the unit 1 Handle this product withcare Avoid any shock or bumping of the product Improper handling could damage the product Do not handle the unit with wet hands Provide proper ventilation and air circulation and donot use near water 2 Requires a proper operating environment This product is not waterproof and is designed for indoor use The allowable temperature range for operation of this productis between 0 C 55 C 32 F 131 F 3 Check the power source voltage The power source voltage should be within the specified range Product must meet the specifications 4 Objects and liquid entry Never push objects of any kind into this product as this may touch dangerous voltage points of short out parts that could result in a fire orelectric shock Never spill any kind of liquid on the product 5 Cleaning Do not use liquid or aerosol cleaners toclean this unit Always unplug the power tothe device before cleaning 6 Servicing Do not attemptto service this product by yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all service to qualified servicing personnel Package Contents we 1 One 1 EPOC POE 100 SV unit host server side 1 One 1 POEOC 100 IPC unit camera side 2 Two 2 Ear Mount Brackets 2 Two 2 Ear Mount Brackets 3 One 1 User Manual 3 One 1 User Manual 2 3 A 17 MANUAL ili OH Uo Fo
6. ranyreturns please include allcomponents listed above with original packaging in Resalable Condition Absolutely No Returns will be accepted if any component is missing damaged MANUAL Parts amp Functions s EPOC POE 100 SV Host Server Si de EPOC POE 100 IPC Ca mera Side Power Input 48 57V DC ALIELLEZL cie E cie is Coaxial Coaxial Ethernet Cable Port Grounding Ethernet Cable Port Grounding Port Terminal Port Terminal LED Status PoE In Out RJ 45 EPOC RJ 45 Yellow light Green light Yellow Green light n a Indicate PoE output DC Indicate cable connection Indicate cable power supply connectionis normal Application Diagram we IP CAMERA CATS Se 6 gt S N 7b A Ja EPOC POE 1004PC EPOC POE 100 5V COAXIAL CABLE 500m 16008 NVR NETWORK CABLE 400m 13000 46 57 DC ae s Ea i IP CAMERA ATS Sal6 a cs DS a fes ii gt di ala 7 POE SWITCH EPOC POE 1004PC EPOC POE 100 SV Hardware Installation ws 1 Please turn off the signal source and the device s power installation with power still on may damage the device 2 Use network cable to connect PoE IN port of SV Unit and PoE Ethernet switch if it s not PoE switch then need to use 48 57V power supply for SV Unit 3 Use another network cable or coaxial cable to connect Ethernet port of SV Unit and Ethernet port of IPC Unit 4 Useanetworkcable to connect IP camera with PoE OUT port of IPC
7. ri AAC User Manual PoE Ethernet Extender Over One Coax Kit EPOC POE 100K EPOC POE 100 SV i EPOC POE 100 IPC Host Server Side Camera Side N 7a N 7b This Ethernet extender consists of one EPOC POE 100 SV Unit host server side andone EPOC POE 100 IPC Unit ca mera side It can transfer Ethernet signalof PC Unit to carrier signal though coaxial cable or network cable and extend to SV Unit then transfer carrier signal to Ethernet signal and transmit power synchronously SV Unit could use 48 57V DC power supply or PoE power supply which fully meets the needs of long distance Ethernet signal transmission and power supply Itis widely used in coaxialcable and network cable mixed wiring security surveillance and network re building projects Features g e Uses coaxial ca ble or network ca blesto transmit Ethernet and power signals e Max distance up to 500m 1600ft via coaxial cable 400m 1300ft via network cable e Adoptadvanced transmission and power supply technology e Fthernetdelaylessthan 1ms meets point to point application e Standards IEEE802 3 10BASE T EEE802 3u 100BASE TX IEEE802 3af at e Protections Excellent circuit isolation protection superior product anti thunder anti static and anti interference ca pability e Appearance Meets MIT rack installation standard e Plug and play no setting required e 48 57V DCpower supply Not included EPOC POE 100 SV A AN Please read the Manual before attemptin
8. t burned out Thisis an extremely costly mistake not onlyin dollars butin time as well How long does it take to test the RJ45 using a Cable Tester Less than one minute The new terms and conditions state When an RMA is requested and the product has been burned by bad RJ45 connections the product is NO LONGER covered under warranty Note Whichever way the RJ45 is terminated on one end of the cable IT MUST BE THE SAME ON THE OTHER SIDE for either TIA EIA 568A or TIA EIA 568B Below is an example of TIAEIA 568B 12345678 Orange White Green White Pair 3 r v A ereen Powers Brom Powers Pin ESES ESES EEE Power a 1 ewe Power slu Power ef EJES eja TIA EIA 568B Fe CE ROHS MADE INCHINA Copyright 2014 AAS Technology N 7 www AAS com tw 8 R201501 V06
Download Pdf Manuals
Related Search