User Manual
Contents
1. User Manual Ceramic Cooktop Model CRSF745 Please read this instruction manual carefully before using your new ceramic cooktop and keep the manual in a safe place for future reference Dear customer You will have many years of cooking enjoyment with your new cooktop Please read this manual carefully and keep in a safe place for future reference Please pay particular attention to the Safety and Maintenance section on page 8 Safety m The installation and connection of the cooktop must only be carried out by qualified personnel m Repairs to the cooktop are only to be carried out by approved service persons Repairs carried out by inexperienced persons may cause injury or malfunctioning If your appliance needs repair contact your service centre m Flush mounted appliances may only be operated following installation in suitable cabinets and workplaces which conform to the relevant standards This ensures sufficient protection against electric shock as required by certification body m f your cooktop malfunctions or fractures switch off all cooking zones and contact your service centre m If the surface is cracked switch off the appliance to avoid the possibility of electric shock Do not re use your cooktop until the glass surface has been changed m When using the cooktop never use aluminium foil products wrapped in aluminium foil or deep frozen food in aluminium cookware m f the supply cord is damaged it2. must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard m WARNING Accessible parts may become hot during use Young children should be kept away This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely Young children should be supervised to ensure that they do not play with the appliance m The cooking zones will become hot when you cook Always keep small children away from the appliance E This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety High temperature protection A sensor mounted inside the cooker will detect any excessive heat and the cooking surface power will be disconnected Safety Residual heat indicators After using the hob waste heat remains in the heating area The power nixie tube shows the code H warning to be away from the heating area a Auto shut down protection During the hob working it is shut off automatically when the default timing reach by the program if without operating If several heating zones work simultaneously the hob will be automatically shut off when any
3. power of each heating zone are shown as follow Right rear Left front Right front inner outter 1200W 1800W 1200W 1000W 1200W Safety Reminding and Maintenance A dedicated power protection air swith protection air switch must be incorporated in the fixed wiring in accordance with the wiring rules A Metallic objects such as knives forks spoons and lids should not be placed on the hotplate since they can get hot Os P A Do not place rough or uneven appliances which may damage the ceramic surface Os Was r Never have the ceramic cooktop to work without food inside otherwise its operational performance may be affected and danger may happen lt gt Never use the ceramic cooktop in high temperature environments such as near a gas stove or kerosene stove For sealed foods such as canned goods please do not heat them before opening their covers so as to avoid any dangers of explosion due to heating expansion i a If the surface is cracked swith off the appliance to avoid the possibility of electric shock Zz After being used for a long time the corresponding heating zone of the ceramic cooktop is till hot Never touch the ceramic surface to avoid burning 8 SE ay Do not put any detergents or flammable materials in the equipment installed under the ceramic cooktop If the supply cord is damaged it must be replaced by the manufacturer its s
4. ervice agent or similarly qualified persons in order to avoid a hazard Never wash the induction cooktop with water directly to avoid danger Keep electrical appliance out of reach from children or inform person Do not let them use the appliances without supervision DISPOSAL Do not dispose this product as unsorted municipal waste Collection of such waste separately for special treatment is necessary Indoor use only Cleanness and Maintenance Clean the ceramic cooktop on a regular basis to prevent foreign matters from entering the fan thus influencing the normal operation You can easily clean the surface of the ceramic cooktop if following the methods given in the table Type of contam Method of cleaning Articles used for ination cleaning Clean with hot water and Cleaning sponge damp sponge Special cleaning sponge for ceramic glass Accumulation Clean with hot water and of dirt abrasive sponge Apply white vinegar to the Rings and lime Polluted zone then wipe it dry with soft cloth or a special article available in local markets Special adhesive for crumbles ceramic glass Use a scraper suitable for Sweetmeat ceramic glass to protect melt aluminum glass a silicon product is or plastics preferred to remove residuals Special adhesive for ceramic glass Hint please disconnect power before the cleaning Maintenance Service Warranty For any failure of the product plea
5. ion by yourself The ceramic hob shall not be mounted to cooling equipment dishwashers and rotary dryers The ceramic hob shall be installed such that better heat radiation can be ensured to enhance its reliability The wall and induced heating zone above the table surface shall withstand heat To avoid any damage the sandwich layer and adhesive must be resistant to heat A steam cleaner is not to be used A board is must to be installed underneath the hob Power line connection The socket shall be connected according to the relevant standard or connected to a single pole cut out 30AMP minimum supply The method of connection is shown in Figure 3 2 2 oO DI E D 2 D green yellow 22 N1 L2 LM N PE 220 240V 220 240V 220 240V connet to the main power supply connet to the main power supply 220 240V 2 2N 220 240V The installer must ensure that the correct electrical connection has been made and that it complies with wiring rules Figure 3 If the cable is damaged or to be replaced the operation must be carried out the by after sale agent with dedicated tools to avoid any accidents If the appliance is being connected directly to the mains an omnipolar circuit breaker must be installed with a minimum opening of 3mm between contacts The installer must ensure that the correct electrical connection has been made and that it complies with wiring rules The cable must not be bent or compre
6. light up ou point you can set time Using the and keys you can realize the setting of timing from 1 to 99 minutes When the key is pressed the settime wil increase by 1 minute when the key is pressed the set time will decrease by 1 minute when the set time exceeds 99 minutes it will restore to 0 minute automatically If press the timer key the indicator displays 0 Timing function Press the timing key then the indicator flashes and at this Timing confirmation 1 Select the power level of the cooking zone then press the Timer button you can set the timer 2 Once the timing indicator flashes for 5 seconds the set time will be confirmed to be valid automatically 3 After selecting a set time press the Timing key confirming its effectiveness Childproof lock To ensure the safety of children the hob is provided with the function of childproof lock Activating the childproof lock When the lock is deactivated touch the childproof lock symbol to activate Child safety the childproof lock However when in the locked position the stop touch control has priority and cuts off the power to the hob And the other buttons are disabled except the stop touch control button and the Lock button Deactivating the childproof lock When the hob in the locking mode you can deactivate the childproof lock by holding the childproof lock symbol The
7. one heating area reaches it s default timer The default working timer for various power levels are shown in the table below ones EE ee Default working time hour Installation 1 Selection of installation equipment Drill holes on the table surface according to the sizes shown in the drawing For the purpose of installation and use a minimum of 50 mm space shall be preserved around the hole Be sure the thickness of the table surface is at least 30mm Please select heat resistant table material to avoid larger deformation caused by the heat radiation from the hotplate As shown in Figure 1 Figure 1 Under any circumstances make sure the ceramic hob is well ventilated and the air inlet and outlet are not blocked Ensure the ceramic hob is in good work state As shown in Figure 2 fe 760mm _ LES m SS Air exit mini 5 cm mini 5 mm i z lt 0 mini 2 cm Air intake Figure 2 Note The safety distance between the ceramic hob and the cupboard above the hotplate should be at least 760mm 3 Fix the hob on the table by screw four brackets on the bottom of hob see picture after installation Adjust the bracket position to suit for different table top thickness Cautions 1 o N a AN The ceramic hob must be installed by paon personnel or technicians Please never conduct the operat
8. se contact the special maintenance department or the customer service center 1 There is a year s guarantee with the our brand ceramic cooker hob 2 The period of warranty shall start from the date on which the invoice is issued 3 Any one of the following cases is without the warranty e Damages caused by improper use storage and maintenance of the consumer e Damages caused by unauthorized disassembly and repair in the maintenance department not designated by the company Model of invoice and model of product maintained are not in conformity or are altered e Valid invoice can not be presented e Damages caused by force majeure Using the ceramic cooker hob for commercial purposes Special Declaration All the contents in this material have been subjected to careful check For any mistake and omission in printing or misunderstanding of the contents the company keeps the right of interpretation Addition any technical improvement will be placed in the revised manual without notice for product appearance and color is according to the actual one 10
9. ssed The cable must be checked regularly and replaced by authorised technicians only The ceramic hob appearance Glass plate 6 Power cord Control panel l ON OFF Schematic diagram of the control panel Timer Double loop key O Qe Ge OQ 18 eo Oo L O Power Timer ON OFF Lock key regulating key Instructions for Use Put the pot in the center of the heating zone Preparation before using After turning on the buzzer will beep once All the indicators light up for one second then go out indicating the cooking hob has entered into standby mode Operation Instructions After the ON OFF key is pressed all the indicators show Then you can set the heat setting of corresponding heating zone Note 1 In standby working mode touch the ON OFF symbol ON OFF the heating zone will restore to the standby working mode if there is no heat setting within 2 minutes _ _ 2 Every heating zone is independent each other Heating zone selection function If you want to use bigger heating zone please touch the heating zone selection symbol when the hob is in working mode You can select the size of the heating zone according to the size of the pot Note 1 This function is available only in the left front heating zone 2 You can select the function from level 1 to level 9 3 When the heating zone is in double loop working mode the double loop indicator will
Download Pdf Manuals
Related Search