TELchart V
Contents
1. Color Time F Selection by color V Selection by hourfdate som ha ff 5 freer m ea rakana WR D aa This set up dialogue is used to specify new selection criteria for tracks symbols and lines areas The dialogue is presented when New selection is requested in the dialogues for track symbols or lines areas To change to values press the up or down buttons To change colour press the new colour KJ Track This dialogue appears Tracks saved tracks s V Show flag M Show datetime Cc o step size E small C Even Dynamic Own Track SAVE PALETE Save new track START 5 OF Save Arpa track SAME ALL Selection F Color V Time trom to From 00 00 01 05 1997 To 23 59 11 05 1997 After 01 00 01 02 2000 New SELECT E Eee TE CLIT IT losttarget 14 TELchart V User Guide Own track The real time track is always maintained limited to 500 points You can select line type and colour it can be deleted DELETE and it can be converted to a saved track SAVE Save track The most common way to save a track is to start and stop track saving as needed A track being saved in real time has no limitation in length but it is recommended to avoid too long tracks since this will slow down the changing of charts For the same reason and to save storage it is also recommended not to store the tracks with smaller interval than needed Small step si2. Contact distributor for more info 29 TELchart V Navnes k i kart SVARTSEJ SVARTSEJ SVARTSEJ SVARTSEJ SVARTSEJ SVARTSEJ ME SVARTSKEJ R SVARTSKR R SVARTSK REN El d H 58 55 2721 E 9 39 551 Blank FIO NuvEndre Avslutt R O V User Guide All names from the digital chart database are separated to a special database When a name is given a list is automatically generated After 3 letter a soundex sound alike routine is started sorting the name by sound more than alphabet The list is also limited to the geographical area shown on TELchart screen Name can be selected using cursor or arrow keys and the corresponding chart position is marked with a big red cross This also includes names from underlying detail charts currently not shown on screen Important for searching greater areas Using subsea transponders displays ROV vessel and other object on TELchart similar to arpa targets 30 TELchart V User Guide Installation The TELchart system unit is placed in a location protected from spray and direct sunlight Check the ventilation to avoid overheating Trackball is connected to specified connector mouse or serial input com1 A keyboard can be connected to specified connector KBD and used to enter text information positions and system operation A keyboard is not required to operate TELchart NMEA 0183 interface is plugged to a serial port for NMEA 0183 input GPS
3. Range Marker function is a bearing function showing a circle around the anchor point The left key is used to set a new anchor point The right key is used to set a fixed VRM circle to the boat sign 10 TELchart V User Guide B Route functions A route is a set of navigational points waypoints that make a route for planned voyage The route toolbox appears at left top e Waypoint list Add info Save Print e Waypoint Calculator Distance time from to waypoint e Extend active route with additional route select e Select route e Erase route e Edit route e Draw new route e Exit function The route menu is automatically removed if not used for a minute or it can be removed by pressing OK It is redisplayed by pressing the Route button again You can now either select a function cancel the route function with a second click on the route button Route navigation To navigate by a planned route the route must first be selected This is done by activating the route function M then click Select route as All routes in the area will be drawn and the cursor changes to a hook Use this hook to grab a route the left key select the route in the direction the route is originally entered and the right key select the route in re tour The last waypoint is marked with a square The active route can be extended with adding one or more routes nS limited by maximum number of 500 waypoints If a keyboard is con
4. Ship name CPA is presented with distance and time The predicted situation is also shown with graphics directly on TELchart screen with marking for arpa target and for own ship SAVE button saves the track for this target SAVE ALL in track dialogue saves tracks for all targets DELETE button erases the track for this specified target Arpa tracks are erased together with own track ERASE button in track dialogue when arpa function is on H Event mark M O B Push this button to save a symbol the last selected from the symbol toolbox in own boat position In addition a bearing is established from own boat to the saved position on line User Manual Gives access to this user manual Acrobat reader must be installed 19 TELchart V User Guide g Tools TELchart Y ver 1 49B 5000 2 4 C Map 65348 20 30 Chart Boat Screen Data Log Depths Lights V All contours v Displayed on day map max V All Soundings D F V Leading sectors offfday night V Active lights offiday night v Texts M Seabed info v Anchorage Cables and Pipes Show map coverage i Land info v Grid F Small Craft Facilities V Tide Fredictions AUTO F Harbour limits JW Zones Areas NEW Chart information Light functions can be selected off active on dusk night display or always active Sectors are shown with full range from up to three selected lights Use the left key to select only white sectors or the right ke
5. and output autopilot It can also be used to signal eventmark symbol input and or alarm output with a break signal e Int green e n Yellow e Out red e Out blue TELchart 2023 has two serial ports and TELchart 2025 six By installation the required ports must be activated Do not activate more ports than required If more ports is needed a signal concentrator can be used All ports can be used for all types of signals The following is NMEA sentences are accepted GGA GLL VTG RMC ZDA from the navigator TTM from a Arpa radar RSD from radar displays radar cursor posisjon on TELchart HDT OSD gyro presented as separate cource vector WHV log governs length of gyro course vector DPT DBS DBT depth data displayed in infofield and stored automatically for all track points and event symbols MWV VWR Wind data displayed with calculated true value MTW temperature stored for track points and event symbols WPL and RTE receive route max 10 WP addition Decca Bridgemaster format is supported 31 TELchart V User Guide TELchart Setup gt TELchart Setup ver 2 16 4 x Vector settings General settings NMEA Test COM Geier Vessel s baud Pa Data Sto Bos baud Par Data og IN fe fi ice E ak l a Gs SE o gt BE al Be M ength m fe feo St eal gE ghar d d Se Alarm On Com port GPS Pos on vessel NONE From starboard m E Wi
6. depth varies the depth interpretation can be selected Own survey using echo sounder The depth values obtained from the digital chart data normally gives a useful overview of the bottom conditions To give a better and more detailed presentation echo sounder data can be added and stored The best result is obtained with evenly positioned data The survey density can be chosen in 3 levels detail for special survey field for general survey in a area and voyage for general presentation typically where contour lines are few On going depth saving is indicated with a red blinking area in the depth The width indicates the storing density Saving can also be turned on and of simply by clicking on this area with the left key Repeated survey in the same area will only increase data as new cells are measured Earlier visited cells will only increase accuracy Logically the tide can in a great degree influence the survey accuracy Standard tide is automatically corrected to the nearest tide reference station Other variations due to weather or ship loading must be manually corrected Some nmea sentences also requires the transducer depth to be given S A R version for search and rescue TELchart can also be delivered in a special version for vessels engaged in search and rescue In addition to the standard functions this version can also generate S A R search patterns as objects or as a sailing ready route Simulated targets can be observed
7. present position Q As F5 but in last used symbol colour F6 Save a red single double flag double flag symbol F7 As F6 and also start stop track saving F8 Save the last specified symbol at present position F10 F11 Save Y and X event mark with last used symbol color F12 Man Overboard function 26 TELchart V User Guide Selection by Name lf keyboard is E F u connected and has been used a GRIMSTAD KRISTIANSAND OK Retur dialogue for selection by name GRIMSTAD KRISTIANSAND ETEF Dee will pop up in RIS R GRIMSTAD addition to the TJ ME OSLO hook cursor when TIAME STR MSTAD selecting a single T NSBERG RIS R ule hak o area A name can be found by typing the first few characters or by pressing z and select from a sorted list To select use cursor key or keyboard arrows Selection is confirmed by pressing OK button or Enter on the keyboard or by pressing the Retour button to select a retour route 27 TELchart V User Guide Options 2D 3D name find etc B 2D 3D graphic sea bottom presentation With 2D display the normal white or blue chart background id replaced with a sea bed relief chart The depth is visualised using colour and shadowing and with contour lines in selected colour and density The 3D function shows a 3D sea bed presentation in a separate Window There are several options to change the presentation With the left key down the viewing angle azi
8. 02E 62 27 130N 6 10570E 1 30000 In addition information areas might appear on the 200 0 12 0 kt chart area This field for example displays the vessel course and speed More fields may appear when certain functions are used The displaying of individual fields can be toggled from the settings button E The boat symbol is displayed in the position received from the GPS equipment This symbol is a red circle with a hairline cross The heading is shown with a green line The length of this line varies with the vessel speed The end of the line indicates where the boat will be in a certain number of minutes if the current course and speed is maintained This value is adjusted from the settings button on the toolbar Normally the GPS heading information is used but is replaced by NMEA HDT messages gyro if this message is available When NMEA HDT sentence is received the gyro heading is shown with a narrow green course vector TELchart V User Guide Functions g Turn TELchart off This button is used when turning the system off or when other Windows programs are to be used Pressing this button brings up a dialogue box in the screen centre Exit Background e Background minimises Switch OFF Computer the TELchart chart display and returns you to Windows Other programs can now be used while TELchart keeps working in the background recording tracks controlling the autopilot etc Press the TELchart
9. TELchart V RH SS 26 SS g g S MBSEI A BS 7 i ATT F gg 3 La P Ke A 1 D de 251198 10 27 2 dE H hy BP Alt ed 3 d E 57 alAr a Beas a s io taj 13 a k Olsakjeyet V gr K iz 1 L Bognese 14 Hatle 31 7 e y 103 SEN Le k Cheska SS on eh oa ce Ki SE Ay S Get d 4 14 i S GH X tes d r ES Bolflua ei n 40 5 x id Il N ETA 10 39 1 9 Nm Wp 3m 21s 073 0 _10 0 kt i 073 5 051 1 tur 0 56 Nm 0 04 stbd T 064 4 R 011 4 1 11 Nm een E V tast Zoom inn H Zoom ut Senter Flytt kart DGPS 3 sats 62 27 018N 6 08 202E 62 27 130 N 6 10 570E 1 30000 Track 141pt 69 8 Nm 17t 34m TELchart V user guide 1 49 www telko no TELchart V User Guide TELchart V User Guide Jah eele Tei d e NEE 4 Ajg CI o g Ss ees EE 7 RI N 2 011514 0 7 EE 7 PEAD leet In 7 EI POCA VVV A SR R A A 7 D Show extra chart aaaaaanaanananannnannnnnnnnnnnnunnunnnunnunnnunnunnnununnnnunnnnnnnnnunna 8 SZ d H Manual ZOOM EE 8 vr vie H 100 HAH Manual chart level 8 Eege 10 SOTTO EE 17 Lines PUG AS nni a a a as 18 PU SO ne genau A E EENEG 19 a Event mark M O EE 19 Chart information NEE 20 Boat symbol autopilot aaaaaaaanaavnan n nnnnunnunnnnnnnnunnnununnnununnnnnunnunnnunnnna 21 So 2 R ee ee 22 Data backup to from diske
10. arbour for example will more often than not have more levels of coverage than open seas With vector charts easy re scaling moving and information selection is facilitated Changing scale and moving the charts Moving the charts is simple Place the marker somewhere on the chart display and press the centre key and the area around the marker will be centred in the display In bearing function and in route symbol line edit mode the chart can also be auto moved simply by placing the cursor in the chart edge in the desired direction Changing scale can be done in two ways Automatic or manual Automatic rescaling is the easiest to use If you want to zoom out larger area covered press the right key and if you want to zoom in see more detail point to where you want to zoom in and press the left key In both cases the area where you pressed the key will be centred on the display If a better chart level is available this will be displayed If not the current level will be zoomed This will not convey more navigation information but might give better overview or detail TELchart V User Guide Manual zoom is operated from the toolbar You can select chart level with H s t vie Bi 100 H is H With these buttons you can switch directly to the desired level The numbers under the level name give the scale x 1000 You can zoom in and out in the level you are currently using with KW bel gives you more detail and B gives more
11. arked with date and time 17 TELchart V User Guide J Lines Areas REESEN F Show datetime e Delete Selection e Edit F Color w Time e New e Exit From 00 00 01 01 1997 To 23 59 31 12 1998 g After 01 00 01 01 2000 jii e Line NEW EDIT SELECT e Polygon j e Circle e Rectangle When activating NEW EDIT function the dialogue is replaced with a toolbox Select function object type and colour A new line or polygon is drawn using left key to position points As for routes A polygon is automatic closed A circle is drawn with two points centre and radius To draw a rectangle you must specify two diagonal corners In delete mode the cursor changes to a delete sign and symbols can be deleted using the left key To modify an existing line polygon it must first be exclusively selected marked with a Then it can be modified the same way as a route 18 TELchart V User Guide e ARPA Regina Mad Bearing 20327 Id 1 Distance 1 17 Nm Pos 59 07 009N Course 590 10 22173E Speed 108kts KR CPA 99 50 Nm 59 min Track F CC wn EE 0 SAVE DELETE When Arpa radar is connected up to 20 arpa targets is displayed with track and course vector Colour and width can be specified for each track If cursor is positioned on a arpa target and the left key is pushed a information window appears With a connected keyboard additional information can be entered
12. art information this dialogue is displayed O Zone CG Area Sc Pass 13 FB 0B E9 7D 13 FC OC EB 85 1004 4858 OK Cancel At initial selection subscription zone or purchase area can be selected Later subscription or areas can be extended as needed Pressing the arrow buttons shows new zones or areas on the chart Press NEW to add a zone area and the corresponding password is displayed To get access to the new charts the corresponding authorisation code must be keyed in the lower edit field and activated with OK Cancel resets new selections not yet activated by code 34
13. button in the lowermost part of the screen to return to the chart display e Exit TELchart and returns to Windows e Cancel returns to the chart display e Switch OFF Computer shuts the system down so that power to the chart system can safely be turned off ALWAYS SHUT TELchart DOWN WITH THIS BUTTON BEFORE TURNING THE POWER OFF Pepsi Ip Screen brightness With these buttons the screen colours can be adjusted for varying light conditions Night position will darken the colours to protect night vision White light sectors are shown in the dimmed positions not by daylight EI Plot chart Repaces standard chart whith a plotting screen with grid TELchart V User Guide E Show extra chart This button displays an extra chart in upper right part of the screen Initially this chart is shown in one scale layer above the main chart Own boat position and track is shown as well Use the mouse keys for manual zoom and displace as for the main chart The chart window size can be changed with the cursor on the chart frame The cursor changes to a double arrow and the frame can be extended with cursor movement while holding the left key pressed SZ aa K Manual zoom Explained in Changing scale and moving the chart Allows manual enlargement or reduction of the chart currently used Limited upwards to x16 and downwards to x1 4 See also The Charts vr vie H 100 H is 25 Manual chart level Also explained in Changing scale and movi
14. dth m From stem mi 12 e 7 Vector icon OK Cancel Vector Icon installs start Icon and activates TELchart When asked for C Map CD number be sure to enter all digits The number is on the CD cover Ship size and GPS antenna offsets is entered for correct representation of own ship symbol on detail charts TELchart Setup ver 2 18 3 5005 x Vector settings General settings NMEA Test COM ports activated NMEA data IV COM1 Grayed ports GPS sentence fauto are not avaible COM2 to Setup APB out zs Interval in seconds B E AMB out 0 0 no data out X Misc RMC out fo a a Depth unit METER z WPL 7 RTE H Clear Database CM93 directory COM 93 Program directory CHIELch h Copy CD 2 43 OK Cancel Apply E Norsk 32 TELchart V User Guide Port Com2 is activated be default and is normally used for GPS autopilot connection To activate more ports radar use the TELchart Setup program Check ports to be used for TELchart data input A port used for trackball mouse should not be activated for TELchart use The Setup program has a test function showing received data and the port parameters can be changed if required GPS sentence selection is normally set to auto with priority for GGA VTG If needed the reception can be forced to GGA VTG GLL VTG or RMC TELchart can output information to autopilot and other instrumentat
15. ictions must be checked in dialogue for Chart information The prediction stations in marked in violet Position the cursor on a station and press left key Tide predictions for this reference is shown AALESUND Lat 62 28 00N Lon 610 00E Date 232 094 19984 Time Zone 2 Apply Max High Water h 01 18 20M Min Low Water h 07 18 O4M Time Cursor 14 32 Tide Prediction Query cursor on the diagram reports standard time and predicted tide The background indicates daylight twilight and night To see prediction for another date specify date and press Apply 25 TELchart V User Guide Keyboard operation To enter text and information on objects a keyboard is required A keyboard can also be used to command the system Ins Dialogue for keyed position The chart area is centred around specified position Enter Save cursor position Used for ka fes fm JM keyed position for route line and symbol points 10 53 Jeng E Home Activate auto button and show boat position TAB next box Arrow keys Move chart Disengages Shift TAB previous auto function Page Up Zoom out Page Down Zoom in W A G Chart level F1 Help info on keyboard functions F2 Display additional map object info light characteristic buoy ID bridge clearance F3 Find a name in the charts Option F4 Start Stop track saving F5 Save depth info text at
16. ion by NMEA sentences GPAPB GPRMB and GPRMC The output NMEA sentences are activated by specifying the output interval for the required sentences Intervall 0 deactivate the sentence The next 10 route waypoints can be transferred from TELchart with nmea sentences GPWPL og GPRTE Do not use more sentences than required Data is output on ports used for GPS navigator and radar Up to two Arpa radars can be connected Radar connected to the lower portnumber gets the left arpa button on the menu line and also the radar cursur displayed One port equipped with standard nmea isolated interface can if desired be used for output to alarm central and or input from a remote button for storing of event symbol similar to keyboard key F8 Password To avoid unauthorised data copy and or route edit these functions may be password protected TelPass v 1 1 TELchart password maitenance Enter master password and press Open to edit passwords 33 TELchart V User Guide TELchart hardware By installation of printer and other changes in Windows the system will ask for installation CD for WINDOWS Installation files is put to C WIN98 so CD is not required If needed specify C WIN98 as source D WIN98 if English version of Windows is installed NB Do not run MS DOS prompt unless keyboard is connected You will have to enter exit or use lt Alt gt lt TAB gt to return to Windows Chart coverage licence By pressing NEW in Ch
17. muth is changed by moving the mouse trackball up and down limited to zenith and sea surface Moving to left or right rotates the image With centre key down the image is moved sideways and with the right key down you can zoom in and out When the viewing angle is along the surface it can be moved further down below the surface holding the centre key down As on the chart a click with the left key zooms in at cursor position the right key zooms out and the centre key moves the picture Using the centre key on own boat symbol places the 3D in auto mode even when the chart is not TELchart ver 1 46D 1004 2 4 C Map 4858 eO 30 Chart Boat Screen Data Log blue V Show soundings dotted line From E C 10 SCH auto Depth survey C Voyage START C Field Detail STOP Contours Tide Io black v 0 4 HORTEN auto S v a 1 6 Transducer depth 30 dyoth oa 7 20 relief DI Correktion metra etc S 28 TELchart V User Guide 2D 3D settings are found in g a separate tool folder At the left side the background colour is chosen The depth of concern can be specified as to from depth or auto from min and max depth on the displayed chart The colour gradient and the contour lines are restricted to this specified depth area Contour lines can be on off and colour and distance can be selected Many chart uses a dotted line to show dangerous areas Since the danger
18. ncel delete mode press track button on top menu or simply press the right key Cut track The cursor changes to a scissors Point at the point to split the track and press the left key You must split a track is to erase or change color for part of the track Change track color The color of a stored track can be changed in he same way as for a symbol See next page 16 TELchart V User Guide E Symbols This dialogue appears PM F Show date time e Save new selection e Delete F Color Time e Edit e Exit From 00 00 01 01 1990 To 23 59 01 01 2009 x After 00 00 01 01 1990 E e Symbol type Auto save soundings each J xD 1 Nm 0 Om ME EDIT e Colour When activating NEW EDIT function the dialogue is replaced with a toolbox with options Select symbol type and colour Position the symbol on the chart with left key If a keyboard is connected text can be added If this text is entered with a leading the text is displayed without symbol In edit mode a previously stored symbol can be moved and changed to the selected type and colour using the left key This mode will also change track colour In delete mode the cursor changes to a delete sign and symbols can be deleted using the left key With attached echo sounder soundings can be autosaved at selected intervals Selection of display criteria is set in dialogue Selection by time colour See above Displayed symbols can be m
19. nected and the routes are named the route can be selected from a route list See operating by keyboard When a route is selected two information boxes appears at screen bottom right if selected in settings dialogue 11 TELchart V User Guide Steering information z Steering course to 171 1 100 2 tour 1 7 Nm 0 03 a next waypoint and the next course route tour or retour distance to waypoint and cross track error is displayed Below the numbers a graphic bar is showing route deviation green to starboard and red to port If the leg has index corridor it is shown as grey bars Full display is 0 1 Nm cross track error E T A and distance to a waypoint Distance and E T A with current speed to a waypoint Ta a is shown The actual waypoint is marked with a Be L square This is by default at the end of route Wp 14 m 53s Information for another waypoint can be obtained simply by clicking that waypoint with the left key At the bottom time to the next waypoint is shown Route calculator With active route or added routes a simple calculator gives distance and time depending From Mt 17 H on speed To vvF Er 4 H print Waypoint list speed i KI A list showing Your active route with its 159 Am waypoints and corresponding position course and distance is presented using a simple word 1 h 13 m processor Additional text can be entered data can be saved and if needed printed on a connected
20. nes areas time colour single Data from a previous version of TELchart is accepted as well 23 TELchart V User Guide Log TELchart ver 1 39 5001 2 1 C Map 890 Chart Boat Screen Data Log V Activate log Interval DELETE Ge 20 min 7 hour C 4 hours TELchart has an automated log function When activated text files with time position speed and course is saved with 20min 1 hour or 4 hour intervals The files are stored as TXT files in directory runtime LOG A saved log file can be selected and by activating the TEXT button Window simple text editor WordPad is opened with the selected log file You can edit the text requires a connected keyboard You can print the log file or You can copy the file to diskette for storage or to be transferred to another computer 24 TELchart V User Guide g Screen printout Printout uses standard Windows Print Screen function The correct driver for your printer must be installed This is done once in Windows Control panel icon Printers icon Add printer The installation program may ask for Windows CD Specify C WIN95 since all installation files are copied to this catalogue from CD ROM D WIN95 if English version of Windows is installed The Print Now function is available from PN in Windows task bar Some printout parameters can be changed Scaling centring printer set up etc Tidal information To activate this function tide pred
21. ng the chart Allows manual selection of chart level This facilitates rapid scale changes H Query Activating query will initially display map object info of special interest directly on the map display light characteristic buoy identification bridge clearance In addition when query function it s on the marker changes to an arrow with a question mark When you click somewhere in the charts with this marker this dialogue appears Hap object information S Source of data gt Category of light leading light 5 Navigation mark fixed Colour white Extended navigational aid Light characteristic occulting ee Signal period 6 0 z E Light Value of nominal range 10 0 nm Light Height 9 0 m Light Sectorlimit one 267 0 a Light Sectorlirnit two 274 0 Small craft Facility Caution area TELchart V User Guide Information of the place you clicked is shown in this dialogue box with subjects in the left area and information about the selected subject in the right Select the subject you want and the information will appear in the area to the right Next to some subjects a is shown This indicates that more subjects are available under this subject If you click on this EH box the subjects will be shown and the box will change into a El Clicking the box again will hide the subjects and return the original box This is how you show and hide subjects in the subject tree TELchart object informati
22. on TEXT shown on map display This area is for information text This is TRACK idk 25 Info not digplaed on the map but Saved 26 10 1997 17 13 available in this info dialog i a a keyboard arrow and edit keys can be Point 29 Time 17 08 eres ERR Pos 59 06 051 N 10 32 068 E WEE Course 074 0 i at FOr Speed 31 0 Kt Enter kev exit edit function Depth 75 0 mtr You can copy text by Windows clipboard tovfrom other applications When you click a TELchart object route track symbol line etc a dialogue box showing all stored information about the point will be shown A TELchart object can have a short text that is also shown on the chart display and a long description text that is shown in this dialogue as example harbour regulations log etc When extra information is entered this is indicated on the display by a In order to input texts the TELchart machine must have a keyboard connected Text is entered and edited as in a standard Windows editor and can also be copied to from other programs by using the clipboard select text ctrl C to copy ctrl TAB to change programs and ctrl V to paste If the machine has a keyboard connected this dialogue will automatically appear when new objects is entered TELchart V User Guide in Auto mode the system will automatically select chart area and level Standard chart display is with north up In Auto mode display mode can alternatively be set to c
23. ourse up or if radar is connected to automatically follow the mode used on the radar heading north or course up Radar mode also adjust the chart scale to fit used radar range Chart and zoom level can be altered with the buttons on the menu line without deactivating the Auto function When manually moving or scaling the chart with the mouse keys on the chart image the function is deselected H Bearing A bearing line with indexlines sailing corridor is shown and the bearing from boat to cursor is shown in a information box T 218 1 R 013 1 1 54 Nm Wile in the bearing mode the chart level and scale can be changed using the buttons on the menu line The chart can still be moved the centre key The left key is used to give the bearing a new fixed anchor start point The anchor point can be re positioned on the boat The right key is used to lock the bearing to a fixed position If the bearing is fixed in both ends the resulting line is transformed to a temporary two waypoint route This function is in particular useful for maintaining a selected course By fixing both ends pressing first left then right key in a desired new position the route is made from the current position This index line dialogue is shown in bearing mode and when creating editing routes The value indicates the distance from the centre line to the index line If index lines is not wanted set the value to zero LAN VRM A Variable
24. overview These functions are limited to 4 times reduction and 16 times enlargement x0 25 x16 If a keyboard is attached it may be used to operate the manual rescaling directly see Keyboard shortcuts The Chart Display The screen has three main areas e The Toolbar is the row of buttons in the top of the screen Most of the functions in the system are accessed through these buttons e The status bar at the bottom contains information areas Short help text Trackball keys L left R right C centre Track saving shows stored points and is blinking in selected track colour while track saving is active Track length Track time GPS status GPS position longitude latitude Cursor position longitude latitude Displayed scale e The chart area covers most of the screen Here the charts vessel position routes tracks etc is shown TELchart V User Guide gj Baap E oal A N AALS x 8 SE 7 Gen H 57 EM lsakji et Lt lk eg B H j mS y yl 43106 nd SEH 1 0 D J H gt 10 2 ll N PD l SV Bognese z 79 yKveiteskj r nescht N 14 Hatle fa n A A e f gd kb gt 31 if M ep avleskalla SE TE S ow 1 dt Ze ETA 10 39 1 9 Nm 073 0 10 0 kt Wp 3m 21s 073 0 10 0 kt i 073 5 051 1 tur 0 56 Nm 0 04 stbd V tast Zoom inn H Zoom ut Senter Flytt kart Track 141pt 69 8Nm 17t 34m DGPS 3 sats 62 27 018 N 6 08 2
25. printer Draw a new route To create a new route press e Position new waypoints with the cursor and save with left key The chart is moved using the centre key To change scale use the buttons on top menu 12 TELchart V User Guide Index width sailing corridor can be set for each route leg See Bearing When route is complete terminate by pressing right key or with ok Pressing this button again removes the route toolbox or it is removed after one minute A simple two point temporary route can also be made by fixing both ends of a bearing The resulting line is then transformed to a simple route Delete route Press x and a dialogue to confirm deletion of a selected route is displayed Edit a route To edit a route the route must be selected as described in Route navigation Press and the route is repainted in red colour to indicate edit mode You can e Move a waypoint Catch the waypoint with the left key move it to the new position and enter the new position by pressing the left key again e Delete a waypoint Point at the waypoint and delete it by pressing the right key e Add a waypoint Point the leg between two waypoints Press the left key and a new waypoint is created Move it to the desired position and press the eft button again When the route is complete press H Press again to remove the toolbox or it is removed after one minute 13 TELchart V User Guide Selection by time colour
26. t e Auto sensitivity sets how often the auto function changes chart display The higher value the more frequent chart displacement e Course vector sets the course vector length in minutes The vector indicates the distance covered with current course and speed e WP Autopilot You can select parallel index lines off for active route leg or for whole route Adjust waypoint radius to optimise waypoint navigation and specify if the autopilot use gyro course This has influence on the signals from TELchart to the autopilot e Make route from a track TELchart can make a route from a stored track Check to make this function active and specify the maximum conversion deviation Too low value will generate close waypoints A TELchart V User Guide Screen TELchart ver 1 49B 5000 2 4 C Map 65348 2073D Chart Boat Screen Data Log Infobox Monitor V Position 15 17 C 2 W COG IT HDT and speed wg EH S nto in meters lt U m D Missing GPS v Bearing to cursor F NewWP CTS M Route VP navigation V Route and vo ETA F Route deviation v Date and time e Infobox Check the infoboxes you want on screen Check if distances below 0 5 Nm is to be shown in metes or Nm Bearing information is always displayed in the bearing function If checked here bearing and distance to cursor is shown also when bearing is not active e Monitor size governs chart area displayed on screen to set the char
27. t scale approximately correct e Alarm activates alarm functions as needed The alarm is displayed as a red alarm dialog with alarm type shown If hardware soundcard is fitted the alarm is sounded as well With connected alarm interface a alarm signal is sent to an external alarm central To accept the alarm press the right button or the Esc key on the keyboard if fitted 22 TELchart V User Guide Data backup to from diskette TELchart ver 1 46D 1004 2 4 C Map 4858 20 30 Chart Boat Screen Data Log Data To From GG Copy OUT Diskette C Copy IN File Delete v Password Selection Ce All Time color C Area Objects W Tracks w Routes V Symbols TELchart3 backup 26 07 2001 gt all Fassword h 132 tracks all 39 routes all 203 symbols all 224 lines all ke Linjes File Into Security backup is a very important and often neglected point The equipment can malfunction bee stolen burn If You have stored important data tracks symbols information this information can be copied to diskette for safe backup storing Data can also be copied from one system to another Check e Data in out or delete e To from diskette or file optionally password protected e Which data and press Execute copy delete When selected data is specified the selection is as specified in the dialogues for tracks symbols and li
28. tte aaaaaaaaaaaaaa naa nunnnnnunnnunnunnnunnnunnnnnunnn 23 LOO JOP r iee on ee ese se panes erento eens cece dees eee en devmeecneeeeeescu wens 24 SCreen DINOU EE 25 RE Bled dn EH e E 25 Keyboard Gett 2217 rail van aa aia sandal EE 26 Options 2D 3D name find etc aaaaavnnaanaaaaaaa nunnnnunnnunnnnnnnnnnnunnnnnnnnna 28 Installation aaaaaaaazaaanaaaaanunnuununnnnunnnnnunnunnunnunnunnunnnnnunnnnnunnnnnnnnunnnnnunnunnna 31 TELchart V User Guide Introduction Welcome to the TELchart V electronic navigation system and chart plotter This guide will introduce you to the basic concepts in operating the system and give you a description of the various functions available Basic controls The system is controlled with a trackball or mouse guiding a cursor on screen This cursor is in turn used to select options from the toolbar changing charts scale or moving the charts It is also used to enter routes waypoints symbols and other chart marks and information The charts TELchart V uses standard C MAP CM93 vector charts and official electronic chart material from hydrographic services around the world as it becomes available These charts give seamless chart coverage of the areas purchased The charts are divided into several levels World and A through G giving increasing levels of detail and being suited for display in different scales Some levels are only available in certain areas A large h
29. y to select all sectors Reselection of a already selected light deselects this light In addition lights can flash onscreen with their correct colour and characteristic as viewed from own boat In this dialogue you can also select what information you want to be shown on the chart display Objects such as texts depth soundings and so on can be shown or hidden In order to remove clutter from the chart display all depth soundings over a specified depth can be hidden Map coverage and grid will be displayed if checked here When tide reference stations are shown tide predictions can be displayed se Tide predictions AUTO shows tide prediction window for the nearest reference station Area covered by purchase can be shown on global map level For NEW see nstallation 20 TELchart V User Guide Boat symbol autopilot TELchart Y ver 1 444 1004 2 1 C Map 4958 Chart Boat Screen Data Log WP Autopilot Boat symbol offcenter i Index lines fofffroute leg I I i i i i i 1 i i I 5 WF radius x LIT Km Auto sensitivity 2 Magar b it Mi J W V Gyro Autopilot Min Max W Make route fram track A di A J S aan 15 Max deviation x 0 01 e Boat symbol off centre sets how far own boat symbol is off centred when auto is activated Setting the slider to the left will position the boat symbol at chart centre Setting it to the right will off centre the boat symbol to display more map area ahead of the boa
30. ze stores points for best resolution and of course with the highest number of points Even step size stores points with normal and even intervals Unless it is specific need to store points at even intervals the dynamic mode is recommended since it stores points at a dynamic intervals long intervals in straight courses and tighter when turning Be aware that the intervals is governed by the used displayed chart scale Save ARPA track All active Arpa tracks can be saved as tracks with position time course and speed in the same way as own tracks Tracks for named target is stored with this name or else named ARPA When checking the lost target box You get the option to save the track when a target is lost Select stored tracks for display Stored tracks can be recalled by different criteria e One single track Press SELECT and catch the selected track This track is marked with a And to further emphasise it can be displayed with marked points or in double width If a keyboard is connected and the track is named it can be selected by that name See keyboard operation e All tracks of a specified colour Selection time colour e All tracks saved in a specified time interval Selection time colour As an option tracks can be marked with date and time and with start and stop flags 15 TELchart V User Guide Erase track The cursor changes to a delete symbol Point at track to delete and press left key To ca
Download Pdf Manuals
Related Search