AIM Infotech Suzuki GSX-R Release 1.00
Contents
1. AIM Infotech Suzuki GSX R Release 1 00 1 Bike models and compatibility with AIM devices This tutorial describes how to connect AIM SoloDL EVO4 and ECU Bridge to Suzuki ECU using the diagnosis connector Supported bike models and years are GSX R600 from 2006 onward GSX R750 from 2006 onward GSX R1000 from 2005 onward GSX R1300 Hayabusa from 2008 onward 2 K line wiring connection These Suzuki GSX R bikes communicate through the K line only this is why they are not compatible with AIM MXL that does not support this communication protocol K line can be reached through a Sumitomo connector placed near the bike ECU under the seat Here below are Sumitomo connector position on the left and its cables functions on the right SUMITOMO CONNECTOR 3 Connection with AIM devices Here follow instructions on how to connect these Suzuki bikes to AIM SoloDL EVO4 and ECU Bridge 3 1 Connection with SoloDL To connect SoloDL to these Suzuki bikes use a dedicated cable properly designed and developed by AIM whose part number is V02569140 Through this cable you can also power your SoloDL Here below SoloDL female connector position with its pinout and the dedicated cable are shown 7 pins Binder Sumitomo connector connector 3 2 Connection with EVO4 EVO4 has the K line on the RPM connector highlighted in red here below This connection requires a dedicated cable properly designed and developed by2. AIM whose part number is V02563140 Please note EVO4 needs external power Refer to EVO4 user manual to know how to power the logger Here below EVO4 RPM connector with its pinout the dedicated cable as well as connection scheme are shown speed beacon 5 pins Binder Sumitomo connector connector 3 3 Connection with ECU Bridge ECU Bridge is available in different versions The one that fits this installation has part number X90BGSSDS Through the Sumitomo connector you can also power your ECU Bridge Here below you see ECU Bridge with Sumitomo connector version Sumitomo Connector 4 AIM Logger configuration Once the ECU connected to the logger this last one is to be configured as connected to that ECU Run Race Studio 2 software and follow this path e Device Configuration gt Select the device you are using e select the configuration or press New to create a new one e select ECU manufacturer Suzuki and ECU Model SDS Protocol e transmit the configuration to the device pressing Transmit 5 Available channels Channels received by AIM devices connected to Suzuki bike using Sumitomo diagnosis connector are ID CHANNEL NAME FUNCTION ECU 1 SDS_RPM RPM ECU 2 SDS TPS Primary throttle position ECU 3 SDS GEAR Engaged gear ECU 4 SDS BATT VOLT Battery Supply ECU 5 SDS CLT Engine cooling temperature ECU 6 SDS_IAT Intake air temperature ECU 7 SDS _ MAP Manifold air pressure ECU 8 S
3. DS _ BAROM Barometric pressure ECU 9 SDS_ BOOST Boost pressure ECU 10 SDS_AFR Air Fuel ratio ECU 11 SDS_NEUT Neutral signal ECU 12 SDS_CLUT Clutch switch ECU 13 SDS _FUEL1 pw Fuel injector 1 ECU 14 SDS _FUEL2 pw Fuel injector 2 ECU 15 SDS FUEL3 pw Fuel injector 3 ECU 16 SDS FUEL4 pw Fuel injector 4 ECU 17 SDS MS Mode selector ECU 18 SDS _XON_ ON XON switch ECU 19 SDS PAIR Air supply system ECU 20 SDS_IGN ANG Ignition angle ECU 21 SDS STP Secondary throttle position
Download Pdf Manuals
Related Search