Yamaha Music System Musical Instrument User Manual
Contents
1. ET Te D J Beo4 operation BeoVision 10 Option 4 j Zone A TV Zone B 4 TV Beo6 operation NOTE For information about choice of Zone contact your Bang amp Olufsen retailer2. 13 information You can connect headphones and listen to a programme or you can connect a Camcorder and watch your home movies on the television Remove the cover to access the camera and headphones sockets To remove the cover press at the right or left side of the cover and you can easily flip it off Camera and headphones sockets Sockets for temporary connections PHONES R L VIDEO DDR AV5 socket PHONES You can connect stereo headphones to the socket marked PHONES When the sound in the speakers is not muted volume adjustment is directed at the speakers To mute the speakers connected to the television press the middle of the Av button When sound is muted in the speakers press A or v to adjust sound in headphones To restore sound in the speakers press the middle of the A v button Note Prolonged listening at high volume levels can cause hearing damage R L For audio connection right and left sound channel respectively VIDEO For connection of the video signal 14 The illustration shows placement of camera and headphone sockets on BeoVision 10 32 For placement of these sockets on BeoVision 10 40 46 see the Getting Started Watch digital pictures on your television To watch your camera pictures connect the camera to the AV5 socket s and switch the television on The television automatically regi
3. Additional features in your television can be made accessible via the FEATURE ACTIVATION menu For information about additional features contact your Bang amp Olufsen retailer Feature activation Feature activation key In order for additional features to become available a feature activation key must be entered The feature key can be purchased from your Bang amp Olufsen retailer The key cannot be deactivated again To enter an activation key gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight FEATURE ACTIVATION gt Press the centre button to bring up the FEATURE ACTIVATION menu gt Select the feature you wish to activate and press the centre button gt Use the number buttons to enter the 12 digit key An incorrect number can be deleted by pressing the navigation button left all numbers can be deleted by pressing BACK gt When the numbers are entered press the centre button to accept 28 FEATURE ACTIVATION KEY The HDMI Matrix feature is an additional feature which can be purchased separately When the purchased feature activation key is entered additional software becomes available in your television The HDMI Matrix itself is a physical product that can be connected allowing you to connect up to 32 external sources to your television and access them via the Beo6 remote control For information about additio
4. BeoLink distribution system installed you can either use your television in the main room such as a living room or in a link room such as a study or bedroom To distribute video signals to link rooms It is necessary to connect a non Bang amp Olufsen link tuner to the link room Distribute sound and picture with BeoLink Link connections Main room Option 1 or 2 RF OUT MASTER LINK Link room Option 6 MASTER AV2 LINK ik tuner The main room television must be connected to the link room system with a Master Link cable and a non Bang amp Olufsen link tuner gt Connect the Master Link cable to the socket marked MASTER LINK on the elevision gt If you want to distribute video signals as well not supported for BeoVision 10 products connect an ordinary aerial cable o the socket marked RF OUT on the elevision Then run the aerial cable to the ink tuner and the Master Link cable to the ink room 36 If an audio system is already connected to the Master Link socket and you wish to connect more equipment the Master Link cable must be split in two and joined with the cable from the link room using a special junction box Contact your Bang amp Olufsen retailer for assistance HDMI VGA and Y Pb Pr signals cannot be distributed from a main room television to the link room system If you set the POWER SAVING to ON you cannot activate the television or its source from your link
5. C2 C3 and C4 While it is possible to register equipment under any of the available source types the type you select affects how you can use your source 12 AV2 SOURCE NAME IR SOCKET IR TYPE HDMI YPbPr S P DIF Regarding High Definition HD sources Standard Definition SD signals can be recorded but HD signals cannot Connect both the HD and the SD signals to the television The best signal is always used If no HD signal is available the SD signal is shown NOTE If you have other equipment connected to your television set POWER SAVING to OFF See page 26 for further information gt gt Register additional vide Standby options o equipment When you register a non Bang amp Olufsen product in the CONNECTIONS menu you can also select different STAN DBY OPTIONS for your product This means that you can select if the connected product should switch to standby automatically The options are OFF AT SOURCE CHANGE The product switches to standby immediately when you select another source OFF AT TV STANDBY The product switches to standby when you switch the television to standby ALWAYS ON The television switch the product to stand does not by but the product may switch to standby due to its own settings MANUAL CONTROL The product can only be switched on and off by means of the remote control For further see page 33
6. gt Loudspeaker setup BeoVision 10 40 46 To calibrate the sound level gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight SOUND gt Press the centre button to bring up the SOUND SETUP menu and highlight SPEAKER LEVEL gt Press the centre button to bring up the SPEAKER LEVEL menu SEQUENCE is highlighted gt Use the navigation button left or right to choose between AUTOMATIC and MANUAL gt Use the navigation button left or right to SPEAKER LEVEL SEQUENCE AUTOMATIC LEFT FRONT RIGHT FRONT RIGHT REAR LEFT REAR adjust the speaker sound and use the navigation button up or down to move to another speaker gt When you have adjusted the sound for all the speakers in your surround sound setup press the centre button to store or press BACK to leave the menu without storing 18 gt gt Loudspeaker setup BeoVision 10 40 46 See the name of the active sound system You can see the name of the active sound system for a source or programme on the screen However it is not possible to adjust or preset a sound system To see the active sound system gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight SOUND gt Press the centre button to bring up the SOUND SETUP menu and highlight SOUND SYSTEM gt Press the centre button to bring up the SOUND SY
7. BeoVision 10 Guide BANG amp OLUFSEN Menu overview 3 See an overview of on screen menus Navigate in menus 4 See how to use the different remote controls for menu operation First time setup 5 Which menus appear when you switch on the television for the very first time Choose menu language 6 How to select menu language Set positions for the television to turn to 7 How to preset positions for a motorised stand to turn to Connections 8 Examples of where to connect additional equipment and how to connect a PC Register additional video equipment 77 How to register connected equipment in the CONNECTIONS menu Camera and headphones sockets 74 How to watch digital pictures on your television and how to connect headphones Loudspeaker setup BeoVision 10 32 15 How to connect loudspeakers Contents Loudspeaker setup BeoVision 10 40 46 16 How to connect loudspeakers and to make your speakers part of a surround sound system Adjust picture and sound settings 20 How to make settings for picture and how to adjust bass treble etc How to use game mode Daily use of speaker combinations BeoVision 10 32 23 How to switch between different speaker combinations Daily use of speaker combinations BeoVision 10 40 46 24 How to switch between different speaker combinations Set the television to switch itself on or off 25 How to make your television switch off automatically or make
8. PEAKER from the Beo4 display and return to the source you were using Beo6 Press to remove the Speaker display Adjust speaker balance with Beo4 You can temporarily adjust the balance between the speakers gt Press LIST and use the navigation button up or down to bring up SPEAKER in the Beo4 display and press the centre button gt Now use w and gt gt to adjust the speaker balance front back left and right gt Press and hold BACK to remove SPEAKER from the Beo4 display and return to the source you were using 24 SPEAKER 1 SPEAKER 1 SPEAKER 2 SPEAKER 3 SPEAKER 4 SPEAKER 5 Your television has a built in Sleep Timer which means that you can make it switch off after a designated number of minutes Also you can make the television react to a Play Timer programmed on an Audio or Video Master connected to the television via Master Link NOTE For safety reasons the stand will not turn if the TV is switched on by a Play Timer Set the television to switch itself on or off Sleep Timer You can make the television switch off automatically after a number of minutes To activate the Sleep Timer with Beo4 gt Press LIST and use the navigation button up or down to bring up SLEEP in the Beo4 display gt Press the centre button repeatedly to select the number of minutes To deactivate the Sleep T
9. STEM menu The active sound system is shown gt Press and hold BACK to exit all menus 19 SOUND SYSTEM INPUT FORMAT MONO STEREO OUTPUT FORMAT STEREO SPEAKER 1 An example of a sound system that can appear in the menu Your speaker combination does not need to match the number of available channels for the sound system to be in effect Picture and sound settings are preset from the factory to neutral values which suit most viewing and listening situations However if you wish you can adjust these settings to your liking Adjust picture brightness contrast or colour Sound settings include volume bass and treble Store your picture and sound settings temporarily until your television is switched off or store them permanently Activate GAME MODE if you connect a game console to your television For information about how to change the picture format see Getting Started Adjust picture and sound settings Adjust brightness colour or contrast Adjust the picture settings via the PICTURE menu Temporary settings are cancelled when you switch off the television gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight PICTURE gt Press the centre button to bring up the PICTURE menu gt Use the navigation button up or down to move through menu items gt Use the navigation button left or right to adjust the v
10. TTON NO NAVIGATION BUTTON Only available on BeoVision 10 40 46 Navigate in menus Beo4 with navigation button If you have a Beo4 remote control with navigation button and your television is set up for use with it see page 27 you use the centre button with up down left and right movement to navigate in menus Press in the middle of the centre button to confirm selections and settings in menus Bring up the TV SETUP menu by pressing MENU twice while the TV is on To back up through menus press BACK To exit menus press and hold BACK If your television is set up for use without navigation button you must use the star to navigate up down left and right in menus and press the centre button to confirm selections and settings in menus To back up through menus press STOP To exit menus press BACK Beo4 without navigation button If you have a Beo4 remote control without navigation button you must use the star to navigate up down left and right in menus and press the centre button to confirm choices and settings in menus Also your television must be set up for use with a Beo4 without navigation button Bring up the TV SETUP menu by pressing MENU twice while the TV is on To back up through menus press STOP To exit menus press EXIT Beo6 If you operate your television with the Beo6 remote control you use the centre button with up down left and right movement to nav
11. TV to switch on connected equipment gt Press the button on the Beo6 display that activates the function you want When you have selected connected equipment as a source press Menu twice to bring up the television s main menu 32 Sky Interactive Help Box office Services TV Guide a Example of a Beo6 display used to operate a set top box If you connect a compatible Bang amp Olufsen audio system to the television using a Master Link cable you obtain the benefits of an integrated audio video system Play a CD on your audio system using speakers connected to the television or switch on a TV programme and send the sound to your audio system speakers Your AV system can be placed together in one room or in two rooms with the television placed in one room and the audio system with a set of speakers placed in another If you want to use Master Link to integrate your audio video system you must set POWER SAVING to OFF see page 26 Not all Bang amp Olufsen audio systems support integration with the television Connect and operate an audio system Connect your audio system to the television Using a BeoLink cable connect the sockets marked MASTER LINK on the television and the audio system Program the AV setup with Beo4 You can set your television placed in an AV system to the correct Option using Beo4 Switch the entire system to standby first Option setting for the televisio
12. alues gt Press BACK to store your settings until you switch off the television or gt press the centre button to store your settings permanently For video sources using the VGA signal the following options appear as well HOR SIZE Adjusts the picture size along the horizontal axis VERT SIZE Adjusts the picture size along the vertical axis HOR POSITION Adjusts the picture position along the horizontal axis VERT POSITION Adjusts the picture position along the vertical axis Note that these four settings only apply for the screen resolution in effect at the time you adjust the settings To temporarily remove the picture from the screen press LIST and use the navigation button up or down to bring up P MUTE in the Beo4 display and press the centre button To restore the picture press a source button Beo6 Press A to bring up the Scene display on Beo6 press Picture then press P Mute To restore the picture press P Mute again 20 PICTURE BRIGHTNESS CONTRAST COLOUR TINT HOR SIZE VERT SIZE HOR POSITION VERT POSTION ey NW a Y 10 B 3 When signals are sent in format 720p 1080p or 1080i the menu item SIZE is available in the PICTURE menu For video sources using the NTSC signal the menu item TINT is available gt gt Adjust picture and sound settings Game mode If you connect a game console or play a To activate GAME MODE with Beo6 PC game using the
13. ame the source you are registering the name you enter appears in the on screen display when you activate the source AUTO SELECTION Allows a source connected to AV5 to be selected automatically as soon as the television detects a signal provided the television is on at the time Options are ON and OFF IR SOCKET Select which IR socket is used for the source options are PUC1 PUC2 PUC3 PUC4 and NONE IR TYPE Select the type of IR connection used Options are PLUG for a cable connection and IR for an IR blaster connection If you select PLUG you need to select if MODULATION must be set to ON or OFF HDMI Indicates whether or not the equipment is connected to the television via one of the HDMI sockets Select the appropriate socket A B or C DVD DVD2 for a connected DVD player gt gt Register additional video equipment YPbPr Indicates whether or not the equipment is connected to the television via the Y Pb Pr sockets Options are YES and NO Can only be registered in one of the AV menus AV2 AV4 or AV6 at a time VGA Indicates whether or not the equipment is connected to the television via the VGA socket Options are YES and NO Can only be registrered in the AV3 menu S P DIF Select the S P DIF connection used Options are 1 2 and NONE An HDMI Expander must always be connected to HDMI C When connecting an HDMI Expander additional HDMI sockets become available C1
14. and highlight MENU NEDERLANDS LANGUAGE SVENSKA gt Press the centre button to bring up the MENU LANGUAGE menu gt Use the navigation button up or down to move to your language choice gt Press the centre button to make your choice gt Press BACK to back up through previous menus or press and hold BACK to leave the menus If your television is equipped with the optional motorised stand you can turn it using the remote control Furthermore you can program the television to turn automatically to face your favourite viewing position when you switch on the television It can turn to a different position when you listen to for example a connected radio and turn away to a standby position when you switch it off You can also turn your television by hand NOTE For information about first time installation of the motorised stand see Getting Started Set positions for the television to turn to Choose one position for when you switch the television on one for audio mode and one for when you switch it off gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight STAND POSITIONS gt Press the centre button to bring up the STAND POSITIONS menu gt Press the centre button to determine the VIDEO position gt Use 44 and bh to turn the television and place it according to your viewing position gt Press the centre button to s
15. and operate an audio system Program the AV setup with Beo6 If your television has been set up in an AV system you may need to set it to the correct Option with Beo6 Switch the entire system to standby first Option setting for the television gt Place yourself in front of the television gt While holding the button standby press the centre button to bring up the Setup menu on Beo6 gt Let go of both buttons gt Press Option Pgm to bring up the Option Programming display on Beo6 gt Press the button that matches the zone in which the television is placed for example Tv Area Option setting for the audio system gt Place yourself in front of the audio system gt While holding the button standby press the centre button to bring up the Setup menu on Beo6 gt Let go of both buttons gt Press Option Pgm to bring up the Option Programming display on Beo6 gt Press the button that matches the zone in which the audio system is placed for example Audio Area 34 Use an audio video system If you integrate your audio system and your television you can choose a speaker combination appropriate to the current video or audio programme and also record video sound on the audio system gt gt Connect and operate an audio system TV TV Zone A LIST TV AV TV To listen to sound from a television source on your audio
16. be set to switch itself to standby after some time with no operation You can also switch Power Saving on or off see page 26 CONNECTIONS Select the type of equipment you have connected to each socket group the sockets used the product name and the source name For further information about the CONNECTIONS menu see page 8 SPEAKER TYPE Select which speakers are connected to the television if any See page 15 16 for further information SPEAKER DISTANCE In this menu you select the distance in metres to each of the speakers in your setup See page 17 for further information SPEAKER LEVEL In this menu you can adjust the volume level of each speaker in your setup See page 18 for further information ADJUSTMENT Adjust bass volume treble etc For information about where to connect extra equipment see the chapter about connection panels in Getting Started The menu language you choose during the first time setup of your television can be changed at any time Once a menu language is chosen all menus and display messages are shown in this language Choose menu language You can select the language for on MENU LANGUAGE screen menus via the TV SETUP menu The text on the screen changes as you DANSK move from language to language DEUTSCH ENGLISH gt Bring up the TV SETUP menu and highlight ESPA OL OPTIONS FRAN AIS gt Press the centre button to bring up the ITALIANO OPTIONS menu
17. button to bring up the CONNECTIONS menu Use the navigation button up or down to Vv step between the different socket groups AV1 AV2 AV3 AV4 AV5 AV6 HDMI EXPANDER and HDMI MATRIX when available gt Press the centre button to be able to register a connected product type to the highlighted socket group gt Use the navigation button up and down to move between the sockets in the group gt Use the navigation button left or right to register what you have connected to the highlighted socket gt Press the centre button to be able to select the product from an on screen list gt Use the navigation button left or right to see lists for other types of products gt Use the navigation button up or down or a number button to highlight the name of the product and press the centre button to register it gt Press the green button to be able to name the source The naming menu is now activated gt Use the navigation button up and down to find the individual characters in the name gt Press the centre button to accept the name 11 CONNECTIONS AV1 NONE AV2 NONE AV3 NONE AV4 NONE AV5 CAMERA AV6 NONE HDMI EXPANDER NO HDMI MATRIX NO The available sockets may vary according to your setup gt Names are shown in the television on screen display when the source is selected gt Press the centre button to bring up the STANDBY OPTIONS menu gt Use the navigation button up or down to see the
18. e CENTRE menu is available Here you can adjust the balance between internal speakers and the external connected speakers You can select the speaker combination that suits the source you are using provided that the various speaker modes are available in your television NOTE If you have no external speakers connected or only a subwoofer you will only be able to choose SPEAKER 1 Daily use of speaker combinations BeoVision 10 32 Select speakers for movie sound You can choose between three speaker modes depending on which source you are using and which speakers you have connected to your television gt Press LIST and use the navigation button up or down to bring up SPEAKER in the Beo4 display Beo6 Press A to bring up the Scene display on Beo6 then press Speaker to bring up the Speaker display gt Press 1 3 to select the speaker combination you want Beo6 Press Optimise or Mode 1 3 The selected speakers cut in automatically gt Press and hold BACK to remove SPEAKER from the Beo4 display and return to the source you were using Beo6 Press A to remove the Speaker display Adjust speaker balance with Beo4 You can temporarily adjust the balance between the speakers gt Press LIST and use the navigation button up or down to bring up SPEAKER in the Beo4 display and press the centre button gt Now use 44 and to adjust the speaker balance left and right gt Press BACK to remov
19. e SPEAKER from the Beo4 display and return to the source you were using 23 SPEAKER 1 SPEAKER 1 m SPEAKER 2 SPEAKER 3 You can preset two default speaker combinations which suit the source you are using see page 22 You can extend your television into a surround sound system by adding Bang amp Olufsen loudspeakers and a BeoLab subwoofer When you switch on one of the sources the television automatically selects the appropriate speakers depending on what kind of sound suits the source you are using The speaker combination is optimised if you press the centre button on Beo4 NOTE If you have added only two front speakers to the TV you will only be able to choose SPEAKER 1 3 Daily use of speaker combinations BeoVision 10 40 46 Select speakers for movie sound You can select the speaker combination that suits the source you are using provided that the various speaker modes are available in your television gt Press LIST and use the navigation button up or down to bring up SPEAKER in the Beo4 display Beo6 Press A to bring up the Scene display on Beo6 then press Speaker to bring up the Speaker display gt Press the centre button if you want to optimise the sound or press 1 5 to select the speaker combination you want Beo6 Press Optimise or Mode 1 5 The selected speakers cut in automatically gt Press and hold BACK to remove the S
20. eo equipment are supported by Bang amp Olufsen For further information about supported equipment contact your Bang amp Olufsen retailer Operate other equipment with Beo4 or Beo6 Use the Beo4 remote control If you have a Beo4 remote control some functions are available directly via Beo4 when you switch on the equipment Additional functions are available through a menu overlay that you bring up on the screen In this menu you can see which Beo4 buttons activate specific services or functions Your Bang amp Olufsen retailer can provide you with a show mapping survey which explains operation of the connected equipment with Beo4 in more detail gt Press a source button for example VMEM to switch on connected equipment gt Press MENU to bring up the menu overlay gt Press the number button that activates the function you want or press one of the coloured buttons to activate a function The menu overlay for equipment connected to a main room television cannot be displayed on the television screen in the link room 31 Example of a menu overlay The Beo4 buttons are shown to the right on the menu and the functions they control are shown to the left The menu may also list buttons on the remote control included with your connected equipment Direct Beo4 operation If you know which Beo4 button activates the function you want you can activate the function without bringing up the menu overlay firs
21. he field to YES later the settings reappear gt gt HDMI Matrix Add sources to your setup The sources connected to the HDMI Matrix must be registered in the television Configuration of inputs gt Configure each input one by one gt Name each input by following on screen instructions If you do not name an input the name from the selected PUC list is used gt Select a PUC source for the specific input The sources are divided into four categories SET TOP BOX DVD PLAYER RECORDER VIDEO RECORDER and OTHER gt When you store the input settings you can configure the next input Continue the procedure until all connected inputs are configured gt Press the green button to return to the CONNECTIONS menu 30 HDMI MATRIX INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 INPUT 7 INPUT 8 The built in Peripheral Unit Controller acts as an interpreter between connected video equipment such as a set top box video recorder or DVD player and your Bang amp Olufsen remote control Use the Bang amp Olufsen remote control to gain access to the functions offered by your non Bang amp Olufsen equipment When you switch on the equipment the functions are available via a menu overlay on the television screen if you use a Beo4 remote control or via the Beo6 display For instruction in the various functions offered by your equipment see the product s own guide Not all connected vid
22. igate in menus Press in the middle of the centre button to confirm selections and settings in menus Bring up the TV SETUP menu by pressing Menu while the TV is on To back up through menus press BACK To exit menus press and hold BACK If your Beo6 is set up to be used without navigation button press STOP to back up through menus and BACK to exit menus Note that a Beo6 should be reconfigured when you add new products to your setup You can also operate your television with Beo5 which is operated similarly to Beo6 The setup procedure is activated when the television is connected to the mains and switched on for the first time You are led through an automatic series of on screen menus in which you must set up the TV and register the extra equipment you have connected such as loudspeakers If you change your setup at a later date you can access the same menus and update your settings First time setup The sequence of menus in first time setup MENU LANGUAGE You can select the language for on screen menus The text on the screen changes as you move from language to language STAND ADJUSTMENT Set the maximum angle for turn of the television Use 4 and b gt to turn the television and limit the movement of the stand STAND POSITIONS Set your preferred preset positions for the television For further information about the STAND POSITIONS menu see page 7 STANDBY SETTINGS The television can
23. imer with Beo4 gt Press LIST and use the navigation button up or down to bring up SLEEP in the Beo4 display gt Press the centre button repeatedly until OFF is shown on the television screen To activate or deactivate the Sleep Timer with Beo6 gt Press Sleep and select the number of minutes or Off To set the Sleep Timer via the menu gt Bring up the TV SETUP menu and highlight SLEEP TIMER gt Press the centre button to bring up the SLEEP TIMER menu gt Press the centre button repeatedly to switch between the number of minutes and OFF f you have a Beo4 without navigation button SLEEP may not be available 25 Play Timer If you connect a Bang amp Olufsen audio or video product to your television with a Master Link cable you can exclude or include it in timed functions via the PLAY TIMER menu For example set the television s PLAY TIMER menu to ON and an audio system s Play Timer to OFF if you wish timed functions to apply only to the television To switch on the Play Timer gt Bring up the TV SETUP menu and highlight PLAY TIMER gt Press the centre button to bring up the PLAY TIMER menu and highlight TIMER ON OFF gt Press the centre button to bring up the TIMER ON OFF menu gt Use the navigation button left or right to reveal ON gt Press the centre button to store the setting For further information about how to program Timers and switch the Play Timer on o
24. it part of a Play Timer How to make standby settings for your television Set up your Beo4 remote control 27 Tell the television if your remote control has a navigation button or not Feature activation 28 How to enter an activation key and get access to additional features HDMI Matrix 29 How to enter settings in the HDMI MATRIX menu Operate other equipment with Beo4 or Beo6 37 How to operate connected equipment such as set top boxes DVD players or the like with the Bang amp Olufsen remote control Connect and operate an audio system 33 How to connect an audio system to your television and operate an integrated audio video system Distribute sound and picture with BeoLink 36 How to make link connections operate a link system Your television in a link room 37 How to set up and operate your television in a link room Two televisions in the same room 39 Option programming and operation of two televisions in the same room 1 SLEEP TIMER PLAY TIMER OPTIONS Menu overview TIMER CONNECTIONS SOUND PICTURE STAND POSITIONS STANDBY SETTINGS BEO4 SETTING FEATURE ACTIVATION MENU LANGUAGE AV1 AV6 HDMI EXPANDER ADJUSTMENT SPEAKER TYPE SPEAKER DISTANCE SPEAKER LEVEL SOUND SYSTEM BRIGHTNESS CONTRAST COLOUR TINT HOR SIZE VERT SIZE HOR POSITION VERT POSITION GAME MODE VIDEO AUDIO STANDBY STAND ADJUSTMENT AUTO STANDBY POWER SAVING NAVIGATION BU
25. list of standby options for when the connected equipment should switch to standby gt Press the centre button to select a standby option gt When you have completed your settings for a single socket group press the centre button to return to the CONNECTIONS menu gt Repeat the procedure for each socket group At first time setup only when you have registered all connected equipment press the green button to store the setup What s on the AV1 AV6 menu SOURCE Select the source you have connected The option you select indicates which remote control button switches on the source For example a source registered as V MEM is selected when you press the V MEM button A source registered as DTV2 is selected by pressing LIST and then the navigation button up or down to display DTV2 and press the centre button Beo6 Press DTV2 Options are ONE if nothing is connected V MEM for a connected video recorder or hard disk recorder or recorder DTV2 for other equipment such as a set top box DTV for a connected set top box TV for a connected set top box PC for a connected PC DECODER for a connected decoder The source lists are divided into 4 groups stb are set top boxes dvd are DVD players and recorders vmem are video recorders including hard disk recorders other are for example PCs and media centres NAME Allows you to n
26. n gt While holding the button standby on Beo4 press LIST gt Let go of both buttons gt Use the navigation button up or down to bring up OPTION in the Beo4 display and press the centre button gt Use the navigation button to bring up V OPT in the Beo4 display and then enter he appropriate number 1 2 4 5 or 6 Option setting for the audio system gt While holding the button standby on Beo4 press LIST gt Let go of both buttons gt Use the navigation button up or down to bring up OPTION in the Beo4 display and press the centre button gt Use the navigation button up or down to bring up A OPT in the Beo4 display and enter the appropriate number 0 1 2 4 5 or 6 33 Option 2 Option 0 LJ If the television and an audio system is set up in one room with all speakers connected to the television set the television to Option 2 and the audio system to Option 0 Option 1 Option 1 If the television with or without additional speakers and the audio system with a connected set of speakers are set up in the same room set the television to Option 1 and the audio system to Option 1 Option 2 Option 2 me lf If the audio system is set up in one room and the television with or without additional speakers in another set the television to Option 2 and the audio system to Option 2 gt gt Connect
27. nal features contact your Bang amp Olufsen retailer HDMI Matrix Important information The HDMI Matrix must be connected and set up by your Bang amp Olufsen retailer Your Beo6 remote control must be reconfigured before you can use the HDMI Matrix You cannot operate the HDMI Matrix with a Beo4 remote control You cannot connect more than one HDMI Matrix in a setup The HDMI Matrix cannot be configured on an HDMI Expander 29 HDMI MATRIX MATRIX INPUTS IR SOCKET IR TYPE HDMI Settings in the HDMI MATRIX menu In the HDMI MATRIX menu you can select settings for your HDMI Matrix In the CONNECTIONS menu gt Open the HDMI MATRIX menu gt Set the field MATRIX to YES gt Set the field INPUTS to at least the same number of sources as you have connected gt Select an IR socket You cannot select NONE gt Select an IR TYPE to indicate how the TV control is connected to the HDMI Matrix If you select PLUG you must select if MODULATION should be set to ON or OFF gt Select an HDMI socket You cannot select NONE gt Press the centre button to store the HDMI MATRIX menu gt After you have stored your settings select an HDMI Matrix type gt Press the centre button to store the settings If you at a later time disable a stored HDMI Matrix configuration by setting the HDMI Matrix field to NO your settings for INPUTS are still saved This means that if you set t
28. nces RIGHT REAR gt Bring up the TV SETUP menu and highlight LEFT REAR OPTIONS SUBWOOFER gt Press the centre button to bring up the OPTIONS menu and highlight SOUND gt Press the centre button to bring up the SOUND SETUP menu and highlight SPEAKER DISTANCE gt Press the centre button to bring up the gt SPEAKER DISTANCE menu gt Move the cursor from speaker to speaker LEFT RIGHT and use the navigation button left or right FRONT CENTRE FRONT to select the approximate straight line distance in metres between your viewing position and each of the speakers gt When you have entered the appropriate speaker distances press the centre button to store or press BACK to leave the menu without storing LEFT RIGHT REAR REAR 17 Calibrate the sound level When you have connected speakers in a surround sound setup to the television you must perform a speaker calibration A calibration sound is produced alternately in each of the speakers you have connected in your surround sound setup Your task is to adjust the sound level from all the connected speakers to match the sound level from the centre speaker You can choose whether you want the sound sequence to occur automatically or manually Once you have performed your speaker calibration you will only need to re calibrate the speaker sound if you make changes to the setup for example if you move one or more of the speakers gt
29. nly be connected and registered to the AV3 socket IR type In the AV menus you can select how a PUC controlled product is connected You can choose between PLUG cable and IR IR Blaster If you select PLUG you must choose between MODULATION ON and MODULATION OFF For information about type of cable and modulation settings contact your retailer gt gt Connections STB STB IR transmitters To operate non Bang amp Olufsen products with a Bang amp Olufsen remote control attach a Bang amp Olufsen IR transmitter to each of the products Connect each transmitter to one of the sockets marked PUC on the main connection panel gt gt Connections Connect and use a PC IMPORTANT Before connecting a PC to the television disconnect the television the computer and all equipment connected to the computer from the mains To connect a computer to the television gt Using the appropriate type of cable connect one end to the DVI VGA or HDMI output socket on your computer and the other end to the VGA or HDMI socket on the television V To hear sound from the computer in the speakers connected to the television use the appropriate cable and connect the sound output on the computer to the R L or SPDIF sockets on the television when appropriate v Reconnect the television the computer and all equipment connected to the computer to the mains Remember the computer must be connec
30. ntre button to bring up the Setup menu on Beo6 gt Let go of both buttons gt Press Option Pgm to bring up the Option Programming display on Beo6 gt Press the button that matches the zone in which the television is placed 37 Link room operation When you are in the link room you can operate all connected systems with the remote control Use sources present only in one of the rooms gt Press the button for the source you wish to use for example RADIO gt Operate the selected source as usual Use a main room source source type present in both rooms gt Press LIST and use the navigation button up or down to bring up LINK in the Beo4 display gt Press the button for the source you wish to use for example TV gt Operate the source as usual Use a link room source source type present in both rooms gt Press the button for the source you wish to use for example TV gt Operate the source as usual gt gt Your television in a link room Listen to stereo sound in your link room gt Press TV to switch on the television gt Press LIST and use the navigation button up or down to bring up AV in the Beo4 display Beo6 Press AV to bring up a source display gt Press for example DTV to activate a source connected to the main room television such as a set top box While using this function distribution of other main room sources to other link room systems is no
31. r off for a connected Bang amp Olufsen audio or video product see the Guide enclosed with the product gt gt Set the television to switch itself on or off Standby settings The television can be set to switch itself to standby after some time with no operation The factory setting is 4 hours This function only applies in video mode not in audio mode To make standby settings gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight STANDBY SETTINGS Press the centre button to bring up the STANDBY SETTINGS menu and use the navigation button up or down to move between AUTO STANDBY and POWER SAVING Use the navigation button left or right to Vv select the setting you want gt Press the centre button to store the setting Vv Press BACK to back up through previous menus or press and hold BACK to exit all menus When AUTO STANDBY is activated a message appears on your television screen if the television has not been operated during the time set in the menu The television then switches to standby if you do not operate it 26 STANDBY SETTINGS AUTO STANDBY POWER SAVING 4 HOURS OFF STANDBY SETTINGS menu When no signal has been detected for 15 minutes the television is switched to standby If you set the POWER SAVING to ON you cannot activate the television or its sources from your link room while the main room
32. room while the main room television is in standby If you have BeoLink installed in your home and you choose to place your television in a link room you can operate all connected systems through the television You must follow the procedure described below when you connect your television for use in a link room 1 Connect the link room television to the mains 2 Using your remote control program the link room television to the correct Option 3 Disconnect the link room television from the mains 4 Make the necessary connections 5 Reconnect the link room television to the mains Your television in a link room Option setting For your entire system to function properly it is essential that the television in the link room is set to the correct Option before you connect it to If you connect the television for use in a link room where audio sources are already connected such as speakers you must set the television to Option 5 instead the television in the main room With Beo4 gt While holding the button standby press LIST on Beo4 gt Let go of both buttons gt Use the navigation button up or down to bring up OPTION in the Beo4 display and press the centre button gt Use the navigation button up or down to bring up V OPT in the Beo4 display and press 6 With Beo6 gt Place yourself in front of the link room television gt While holding the button standby press the ce
33. sters the signal and you can see the still pictures on the screen or video clips To select the CAMERA input via Beo4 gt Press LIST repeatedly to display CAMERA on Beo4 and press the centre button Beo6 Press CAMERA In order to display CAMERA on Beo4 you must first add it to the Beo4 list of functions For further information see the Guide enclosed with Beo4 If you want you can connect Power Link speakers and a BeoLab subwoofer to your television You can also choose to connect only a subwoofer or a set of external speakers If you connect both speakers and a subwoofer the subwoofer must be connected to the television and the speakers must be connected to the subwoofer Loudspeaker setup BeoVision 10 32 Select your speaker type Switch on the television before you SPEAKER TYPE adjust speaker settings FRONT YES SUBWOOFER YES To register the speaker types gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight SOUND gt Press the centre button to bring up the SOUND SETUP menu and highlight SPEAKER TYPE gt Press the centre button to bring up the SPEAKER TYPE menu and use the navigation button up or down to select your speaker type gt Use the navigation button left or right to switch between YES or NO gt Press the centre button to store or press BACK to leave the menu without storing 15 Add Po
34. system speakers without switching on the screen press LIST and use the navigation button up or down to bring up AV in the Beo4 display then press TV Beo6 Select the zone for your audio system speakers then press a source button such as TV Beo4 instruction is shown to the right and Beo6 instruction to the left Zone B LIST cD g U To listen to audio sound on the speakers connected to the television press LIST and use the navigation button up or down to bring up AV in the Beo4 display then press CD Beo6 Select the zone for speakers connected to the television and then press an audio source button such as CD Beo4 instruction is shown to the right and Beo6 instruction to the left 35 To listen to sound from a television source on your audio system speakers with the screen switched on press TV press LIST and use the navigation button up or down to bring up AV in the Beo4 display then press TV again Beo6 Press TV then select the zone for your audio system speakers and press TV again Beo4 instruction is shown to the right and Beo6 instruction to the left The BeoLink system makes it possible to distribute picture and or sound to other rooms throughout the house For example you can connect your television in the living room to another video system or set of speakers in another room thereby making it possible to distribute the picture or sound to other rooms If you have a
35. t While your equipment is on gt Press one of the coloured buttons to activate a function gt Press and hold the centre button to bring up the Program Guide or the Now Next banner on the screen if you are using equipment that supports these functions gt Use and to step between channels gt Use 44 and to rewind and wind in for example recordings gt Press MENU and use the number buttons to activate the function you want This operation does not apply to Beo4 without navigation button Use equipment menus Once you have activated connected equipment you can operate its own menus with your remote control While equipment menus are shown gt Use the navigation button up down left and right to move in menus gt Press the centre button to select and activate a function gt Press the number buttons to enter information in menus or services when relevant gt Use the coloured buttons as indicated in the menus of your connected equipment gt Press BACK to back up through previous menus or press and hold BACK to exit all menus gt gt Operate other equipment with Beo4 or Beo6 Use the Beo6 remote control The main functions of your equipment can be operated with the Beo6 remote control Not all functions may be supported by Beo6 The available services and functions are shown in the Beo6 display when you activate the equipment gt Press a source button for example D
36. t possible 38 If you have placed your television in a room where you already have a Bang amp Olufsen television and commands from your remote control can be received by both televisions you must change the Option setting of the television This prevents simultaneous activation of both televisions When you Option program the television disconnect the television you do not want to program from the mains This ensures that only the television you want to program receives the Option programming Two televisions in the same room One remote control for both televisions For your television to function properly it is essential that the television is set to the correct Option see page 37 for information on Option programming You must set your television to Option 4 and if you have a Beo6 you must also select the correct zone Beo4 Operate your television in Option 4 Normally you can activate a source such as TV simply by pressing the relevant source button on your remote control However when you set your television to Option 4 you must do the following if you have a Beo4 gt Press LIST and use the navigation button up or down to bring up LINK in the Beo4 display gt Press a source button such as TV 2 n order to display LINK on Beo4 you must first add it to the Beo4 list of functions See the Guide enclosed with your Beo4 39 Be 0Vision 10 Option 4 LIST LINK TV Tv
37. ted to a grounded wall outlet as specified in its setting up instructions If you have connected your PC to the VGA socket on the television you must register the PC to the AV3 socket in the CONNECTIONS menu A PC connected to the HDMI socket can be registered to any of the AV sockets or socket groups 10 Bring up the computer image on the screen To see the computer picture on the screen you must bring it up with your remote control To bring up the computer picture gt Press LIST and use the navigation button up or down to bring up PC in the Beo4 display and press the centre button to bring up the picture You can then operate the computer as you normally would Beo6 Press PC If you connect additional video equipment to your television you must register the equipment in the CONNECTIONS menu The CONNECTIONS menu appears automatically on the screen during first time setup for you to register connected equipment if it is not detected automatically by the television If you connect equipment at a later date you must register this equipment in the CONNECTIONS menu Register additional video equipment What is connected Registering the equipment connected to the television enables you to operate it with your remote control gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu CONNECTIONS is highlighted already gt Press the centre
38. television as a directly monitor you can activate Game mode gt Press Game to activate GAME MODE Game mode minimises the delay caused press again to deactivate GAME MODE by signal processing The television remembers if Game mode was activated the last time each source was selected To activate GAME MODE via the TV SETUP menu gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight PICTURE gt Press the centre button to bring up the PICTURE menu gt Use the navigation button up or down to move to GAME MODE gt Press the centre button repeatedly to switch between ON and OFF To activate GAME MODE with Beo4 directly gt Press LIST and use the navigation button up or down to bring up GAME in the Beo4 display gt Press the centre button repeatedly to switch between ON and OFF If you have a Beo4 without navigation button GAME may not be available 21 Adjust volume bass or treble You can preset levels for sound volume bass treble and a subwoofer You can switch the loudness feature on or off The loudness feature compensates for the human ear s lack of sensitivity to high and low frequencies These frequencies are boosted at low volume levels so that low music becomes more dynamic If you have connected external speakers you can preset two default speaker combinations one to be used each time you switch on a
39. television is in standby Furthermore when POWER SAVING is set to ON you cannot activate external PLAY TIMERs You must set up your television to be operated with a Beo4 with or without a navigation button Even though your remote control has a navigation button you can choose to set your television up for operation without navigation button This can be useful if you have a BeoLink system also comprising a television without the BEO4 SETTING menu If you set up your television for operation without a navigation button and your Beo4 has a navigation button you must also change the MODE setting of your Beo4 See the Beo4 Guide for further information Set up your Beo4 remote control Beo4 type In the BEO4 SETTING menu you set up whether the Beo4 remote control you are using has a navigation button or not To make Beo4 settings gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight BEO4 SETTING gt Press the centre button to bring up the BEO4 SETTING menu gt Use the navigation button up or down to select the setting you want gt Press the centre button to store the setting gt Press BACK to back up through previous menus or press and hold BACK to exit all menus 27 BEO4 SETTING NAVIGATION BUTTON NO NAVIGATION BUTTON For information about menu operation with the different types of remote controls see page 4
40. tore the position To store a stand position for when an audio source is switched on from the television gt Highlight AUDIO gt Press the centre button to determine the AUDIO position gt Use 44 and bh to turn the television and place it as you wish gt Press the centre button to store the position STAND POSITIONS VIDEO AUDIO STANDBY STAND ADJUSTMENT To store a stand position for when the television is switched to standby gt Highlight STANDBY gt Press the centre button to determine the STANDBY position gt Use 44 and to turn the television and place it as you wish gt Press the centre button to store the position gt During first time setup press the green button to continue first time setup otherwise gt press and hold BACK to leave all menus The connection panel on your television allows you to connect signal input cables as well as a variety of extra equipment such as a recorder or a linked Bang amp Olufsen music system Any non Bang amp Olufsen equipment you connect to these sockets must be registered in the CONNECTIONS menu For further information see page 11 Before you connect any equipment to your television remember to disconnect the television from the mains Connections VD HDMI Expander There are some restrictions as to the types of equipment that can be connected to the sockets Equipment with VGA output can o
41. video source in your television and one to be used each time you switch on an audio source connected to your television You can still select a different speaker combination any time you wish For further information about speaker combinations see page 23 gt gt Adjust picture and sound settings To adjust sound gt Bring up the TV SET OPTIONS gt Press the centre bu OPTIONS menu and gt Press the centre bu UP menu and highlight ton to bring up the highlight SOUND ton to bring up the ADJUSTMENT VOLUME BASS TREBLE SUBWOOFER SOUND SETUP menu and highlight ADJUSTMENT gt Press the centre button to bring up the ADJUSTMENT menu gt Use the navigation button up or down to select an item to adjust gt Use the navigation button left or right to adjust the values or choose a setting gt Press BACK to store your settings until you switch off your television or gt press the centre button to store your settings permanently 22 ON SPEAKER3 SPEAKER2 LOUDNESS DEFAULT VIDEO DEFAULT AUDIO ADJUSTMENT VOLUME BASS TREBLE CENTRE LOUDNESS DEFAULT VIDEO DEFAULT AUDIO ON SPEAKER3 SPEAKER2 The content of the ADJUSTMENT menu varies according to what you have connected to the television The subwoofer menu is only available if a subwoofer is connected and no external speakers are connected If external speakers are connected and you have selected SPEAKER3 th
42. wer Link speakers and a BeoLab subwoofer to your television and you have a surround sound system A surround sound setup fits easily into your living room Let the picture determine your ideal viewing and listening position You get the best sound experience in the area created by the speakers Loudspeaker setup BeoVision 10 40 46 Select your speaker types Switch on the television before you SPEAKER TYPE adjust speaker settings FRONT To register the speaker types REAR gt Bring up the TV SETUP menu and highlight OPTIONS gt Press the centre button to bring up the OPTIONS menu and highlight SOUND gt Press the centre button to bring up the SOUND SETUP menu and highlight SPEAKER TYPE gt Press the centre button to bring up the SPEAKER TYPE menu and use the navigation button left or right to reveal SUBWOOFER your speaker type gt Press the navigation button down to move to the next speaker and use the navigation button left or right to reveal your speaker type gt Press the centre button to store or press BACK to leave the menu without storing 16 BEOLAB 8000 BEOLAB 4000 YES gt gt Loudspeaker setup BeoVision 10 40 46 Set speaker distance Switch on the television from your SPEAKER DISTANCE favourite viewing position Enter the straight line distances in metres between CENTRE your position and the individual speakers LEFT FRONT RIGHT FRONT To set the speaker dista
Download Pdf Manuals
Related Search