Home

Aviosys IP Kamera 9070 Lite user manual

image

Contents

1. show more options E m ana ana A gor Lon 9 Using CNT with Surf16 CH CNT makes connecting to the IP Kamera 9070 Lite a very simple task Using Surf 16 CH and multi device DVR monitoring software you can easily view your 9070 LiteCS Follow these simple steps Finding the MAC Address There are two ways to find the MAC address in IPEdit Note IP Server must be enabled on your device s webpage By default IP Server is enabled Find MAC Address in LAN Using IPEdit d Ref 90020326K0709 1 In IPEdit highlight the device that you are using On the right side of IPEdit you will find the MAC Address that you will need to use CNT Note Make sure when you are typing in the MAC address to leave out the Local Devices iple M ame 19216810020 M REF Sample Mame Gateway 198 168 100 1 IP Address 132 168 100 20 kletmask 255 255 255 HTTP Pari 80 SL S060SL3 192168 100 203 HTTP 0 MAC Find MAC Address in WAN Using IPService on IPEdit 1 To find your MAC Address through the internet Open IPEdit and hit the connect button on IP Service 2 Then Type in the name of your device in this case it is Sample Name then hit the search button 3 Your device should be listed and the MAC address should be displayed on the screen Copy down the MAC address and use it to connect via CNT Adad device us
2. White Balance auto Day and Night day TV Output Enable Disable Binning Skipping pe Fe binnin id ia Image Settings Tune Image BLC ON OFF Backlight 502 Brightness 502 Contrast wonn 5026 Saturation 50 2 Sharpness 50 2 eo f Live Video Image Network ak System M Application 4 ptz set White Balance Select from the following options auto indoor or outdoor Day and Night Select the mode Day or Night TV Output Select the mode enable or disable to output to a T V Binning Skipping mode Binning enables low light light performance Select Binning Skipping 4x Binning mode default is Binning During BLC Backlight control Here Backlight control can be turned on or turned off Backlight Backlight controls how the 9070 Lite will react by turning the picture darker or lighter depending on the amount of back light that is available Brightness Brightness controls the brightness of the picture Contrast Contrast controls the contrasts between the colors Saturation Saturation controls how saturated the picture is Sharpness Sharpness alters how sharp the picture is Default Values Default To Return all values to normal default click on this button Note Make sure you click on the Apply button to save any changes made 26 Ref 90020326K0709 Network Network Network When the network settings have been changed please res
3. 2 Select the IP Kamera section and pick the IP Kamera and Model that you are using PRODUCT MANUAL IP KAMERA ouril6 CH Enghlsh Manual CH Chinese Tr Manual 8 3 Download the following software and save them to the appropriate locations IPEdit Device search tool which allows you to modify IP settings find your on the local network and IP Service b Surf 16 CH 16 Channel DVR Monitoring 8 Recording Software Views up to 16 channels on one screen skle Ref 90020326K0709 4 Once installation is complete please double click the IPEdit to configure and search for your device Installing VLC Codec The files that are recorded by the 9070 Lite requires this codec so that you are able to view the view Download the latest version of the VLC codec and install it into your computer You can find the latest version of the codec from here http www videolan orq Using IP Edit IPEdit is a search tool designed to setup and access the IP Kamera 9070 Lite IP Service is an additional feature which searches for the device easily without having to remember long complicated IP addresses Instead this technology allows the user find his or her device through the internet just by device name Note Please allow the IP Kamera 9070 Lite 1 to load before using IPEdit Default IP 192 168 1 168 When 9070 Lite is connected to PC directly Default Login Admin Default Passwor
4. 40 CHANGE GATEW AN NS re ens rcd M e LM det n d a e e are LL MS 41 CHANGE DIN tet aa eti ab a a a uelle ent ea a Ceci e 41 WHIPEG STREAMING sos eta da koi kara ta bal do barak de kou aie ota data n ao at Aa 41 8 USING RISP WITH i a nt a at ke n kk a ai a a la ue au a kk e a a a tk kk ae a 41 9 USING CNT WITH SURFIT6 CH ka a kaj ki a aa kl td ka p a 43 FINDING THE MAC ADDRESS ced sncedvevetvussusiehacssamancdes saunas ERERAES S wepaeusasenersseaees 43 ADD DEVICE USING CNT eem 44 10 FREQUENTLY ASKED QUESTIONS FA kk kn ki w k k a eo a n kt l t a kal A5 sls Ref 90020326K0709 1 Welcome Introduction The IP Kamera 9070 Lite provides reliable high quality solution to IP Kameras Its distinctive 720P HD quality picture Tri mode video capability RTSP broadcasting capability wide angle lens and additional functionality makes this small device very powerful and unique Using innovative IP technology the built in web server of the IP Kamera 9070 Lite will allow you to view your IP Kamera from any remote locations around the world while bringing you world class surveillance and ease of mind Furthermore with CNT technology the 9070 Lite is easy to setup amp use simply just plug and play Minimum System Requirements CPU Minimum Requirements Intel R Pentium R DU
5. International Inc vere pte lly While files from the Internet can be useful this file type can potentially harm your computer Only install software from publishers you trust What s the risk 4 Once activeX controls have been installed the video feed will show on the screen Ref 90020326K0709 kis M JPEG 640x352 pe la Intemational Inc 7544 j ai a SNAPSHOT 9070 IPCAM9070 Note If there is no active x controls that are showing up please go to internet explorer and enable activeX controls Internet Options Sul Security Settings Intemet Zone J Privacy Content Connections Programs Advanced 1 Enable Select a zone to view or change security settings 19 Display video and animation on a webpage that does not use y O pes Internet Localintranet Trusted sites Restricted sites Internet ka This zone is for Internet websites except those listed in trusted and restricted zones Security level for this zone Allowed levels for this zone Medium to High Medium high Appropriate for most websites Prompts before downloading potentially unsafe content Takes effect after you restart Internet Explorer Unsigned ActiveX controls will not be downloaded Reset custom settings Enable Protected Mode requires restarting Internet Explorer at 2 Custom level Default level Reset all zones to default level
6. configurations This includes the following Date and Time Date and Time 29 Ref 90020326K0709 Date and Time The Local Time Date 2000 01 01 Time 08 16 06 The Desired Time Set Manually Date 2009 08 19 YYYY MM DD Time 09 42 34 HH MM SS Synchronize with Computer Time Date 2009 08 19 Time 09 41 42 Synchronize with SNTP Server A SNIP Server tw pool ntp org Time Zone GMT 08 Taipei Beijing Chongqing Urumqi Hong Kong Perth Singapore Date Format YYYY MM DD Set the date and Time of the device here The Local Time The local time corresponds to the current time of the IP Kamera 9070 Lite Time Setup Setup the current time of the device here 1 Set Manually Set the time manually 2 Synchronize with Computer Time Synchronize the time with the current computers time 3 Synchronize with SNTP Synchronize with SNTP Time Stamp Time sta mp The time stamp adds a time to the live video When a recording is made this time stamp will show up with in the video file as well To enable the Time Stamp check the enable box Date and Time stamp E Enable Date and Time stamp Date Format YYYY MM DD 30 Ref 90020326K0709 Users List admin Admin Delete User Add Modify User User Name Password Confirm Authority Admin Operator Viewer The user setting allows you to create and remove users for access to the
7. http 192 168 1 192 vb htm gateway 192 168 1 1 Change DNS This command allows you to change the gateway the IP Kamera 9070 Lite http ipaddress port vb htm dnsip dnsipaddress Ex http command http 192 168 1 192 vb htm dnsip 168 95 1 1 MJPEG Streaming This command allows you to integrate streaming data into a software website or any other application http ipaddress port ipcam mjpeg cgi Ex http command http 192 168 1 192 ipcam mjpeg cgi 8 Using RTSP with VLC Before Setting up VLC Make sure that the 9070 Lite is set to be the DMZ host on the router that you are using please refer to the routers manual on how to accomplish this How to setup VLC media player amp Open a network stream Note Before using RSTP you must port forward your router to the following port numbers For 1280 x 720P Mpeg4 1 Port forward to 554 If Port forwarding Mpeg4 2 Port forward to 8554 1 Open VLC media Player 2 Click on Tools gt Preference 3 On the bottom of the screen click the Reset preference button Show settings Simple All Swe Cancel 4 On the bottom left hand side of VLC select the all under the show settings area oo Show settings Simple 5 Then in the left panel select Input Codecs Demuxers RTP RTSPI and type in the RTSP user name and RTSP password 41 Ref 90020326K0709 Preferences 6 Check the Cache value For low late
8. motion detection Type and Zoom Type The type function allows you to set the streaming format for the IP Kamera 9070 Lite You can select from the following type of resolutions depending on the format type you have set in the image settings Type Zoom MPEG4 1 1280x720 M JPEG 640x 352 MPEG4 1 1280x720 MPEG4 2 352x192 Zoom The zoom function allows you to select the screen size of the stream Depending on the type that you have selected there will be different zooms that will be available Type zoom 1X zoom The 1X zoom is the normal view for each type 2X zoom This 2X zoom is 2 times the normal view for that type Scaled 720 Is a resolution only available in MPEG 4 1 which sets the picture at 720P Screen Size Will enlarge the image to the who size of the screen This function is very useful when trying to display on larger monitors Mouse EPTZ Mouse EPTZ Mouse PTZ Controls Zoom Out Hold Right Mouse Zoom In Hold Left Mouse Quick Zoom Out 2 x Right Mouse Quick Zoom In 2 x Left Mouse On the live video screen move the mouse cursor to the video and click left or right click to use the Mouse ETPZ functionality Here you can easily Zoom in Zoom Out Quick Zoom Quick Zoom Out 20 Ref 90020326K0709 The instructions will be displayed on the screen when the mouse if moved over the 8 icon Mouse PTZ Controls Zoom Out Hold Right Mouse Zoom In Hold Left Mouse Quick Zo
9. 0 5 JSOFTWARE SETUP iei tei ees a di RR ka eU eoa SU NE EI RES AR SONO E ERU 10 SOFTWARE FOR IP KAMERA 9070 LITE 1o eo ero eaa ours an ey orae a eau ana ne Er eaa Ero Negra puo qa erar ren rog randa 10 INSTALLING VEC CODEC X CDU Y ees io ko ka a e Fa o we va vt a a Dres dad Pv n ka E uev pa dud eaa 12 USING IP EDIT cis tk Se al rl a ONERE DEUX FERAE eed EE UR FEX Vr sa UV o FEY A UN Ue a a kk e C Rv ko kapa E vdd eaa 12 OUICICEASY SETUP RECOMMENDED 535 dea eae Po MR E eio oM PUDE 13 CUSTOM SETUP ADVANCE USERS oou ate NES Casu n Spo t pter nde Dem a DM CI MI 14 Dude ke b es aa 15 6 WEB INTERFACE kat ka d kl kk id a kk ra kt a A e 16 CONNECTING TO THE 9OZO LITE kaa wk ee etre n baa a k e lk kaa Ope kann ices eases aide on saa ae sun 16 THE CONTROL CONSOLE oo sekwe iii pano oka e ie ak da bb ie aa bk mea oi e ak eee van aa a kok kasiet 19 LIVE plomo M RP 20 AND ZO ONI Ere 20 MOTON DETECTION ocio koi kalis alan ta dala akne ok a ct kl n Da e ke A Aa 21 ACHVE RECORD L vi M oi ba e a Bb a ee el kn e at ER 21 RECORD toy ne ou kek e at e ka a n k nat ten lo ak a f e ke ke at 22 SNAP SOT 22 IMAGE av a ia ee e a a
10. 18 Ref 90020326K0709 The Control Console Dosolution dBrow Actively Recording ic eoa 101280720 Intemational Inc oom aX o x Welcome to Tabbed Brow The IP Kamera 9070 Lite Control Console starts in the 8 tive video Section of the webpage In this section navigate to the other options and settings of the 9070 Lite Live Video Live Video The Live Video section allows the user to view the camera change resolution views E Image Image The Image section allows you to edit the image settings including recording viewing codec frame rate image tuning brightness contrast saturation and etc C5 Network Network The network section allows you to change the devices network settings ftp settings smtp email settings sntp settings and IP service settings K System System The system section allows you to change the devices date and time set time stamp for video users audio settings update event log n Application Application The application section allows you to change the video recording format ftp storage settings 5 PTZ Set EPTZ Set The EPTZ allows you to zoom into the cameras image using digital zoom with pan amp tilt 19 Ref 90020326K0709 Live Video The Live video section of the IP Kamera 9070 Lite is where you will live view the video of the device From here you can change resolution record onto current pc take a snapshot zoom and detect
11. 32 158 100 11 Subnet Mask 235 255 255 l Default Gateway 132 158 1060 1 Details IP Address Make sure the first 3 sections of the IP Address matches the gateway address Example Gateway Address 192 168 1 1 IP Address 192 168 1 xxx 3 Once the Default Gateway information has been obtained enter the correct information into IPEdit and hit the submit button 14 Ref 90020326K0709 arwa cn Mon enn Device Nene Address IP Address Q9070 maxhome9070 009070000017 8088 123252519 9070 IR920 9070 009070000014 80 61 229 48 100 9070 cloud9070 009070000028 80 118 169 132 237 9070 Winons9070 009070000001 80 218 169 107 66 si Local Devices 92 166 1 147 if REF Name IPCAM9070 Gateway 192 168 1 1 IP Address 192 168 1 80 Netmask 255 255 255 06 HTTP Port 80 90600 1921681127 Cam location 93 192 168 1 47 HTTP Port2 Y1 0 9060L 192 169 1 136 11 17 9060SL1 192 169 1 201 00 90 70 1 a2 a3 C DHCP Static Q Rescan EP submit Qo E4 F1 Help X Exit 4 Then hit the rescan button on IPEdit to confirm the changes have been made IP Service How to use IP Service on IPEdit IP service allows the user to directly connect to his her device through the internet without having to remember long confusing IP Address Instead you only need to remember the name of the device that the yo
12. 5 Ethernet cable to the Ethernet port DC 5 V Power Input Plug in the Power Adapter to the DC 5V Ref 90020326K0709 4 Hardware Setup Before setup the device make sure of the following 1 Make sure that all the package contents are all included if anything is missing please contact the store or your distributor 2 Make sure the power adaptor is the correct specification 3 Make sure that all the cables are working correctly Internet Accessible Setup The internet connection can be setup in two main ways so that the 9070 Lite can be accessed through the internet a My network uses a Router Firewall to connect each device to the internet Roter SINTERNET Requires port forwarding on the router to be able to aceess it on the web In this case the 9070 Lite will need to be port forwarded on the router so that it can accessed by the internet For example 9070 Lite IP Address 192 168 1 882 9070 Lite Port 9070 On the router that is being used port forwarded port triggered IP Address 192 168 1 882 and port 9070 For this section you may be required to refer the user manual for the router due to the fact that each router has a different way of setting up the device Note Please refer to page 43 on how to use CNT Cross Network Technology With CNT no port forwarding is required to view the camera But for normal functionality please use the web browser to view the camera b My internet uses a static IP A
13. AL Core D CPU 3 0GHz or equivalent Operating Systems WINDOWS Operating Systems IE5 0 SPI 512 MB system memory or above Video Card 3D hardware accelerator card required 100 DirectX 9 0c compatible 10 100 Ethernet switch hub Sound Card DirectX 9 0c compatible sound card Ethernet network port card Network cable Internet For remote access or Ethernet Network Internal Network use with some type of Internet connection i e ADSL Cable Dial up or any other forms of Internet service Software VLC media player 0 8 6b or above Windows XP Service Pack 2 or above Resolution of screen setting 1280x960 or higher for the display of 720P Ref 90020326K0709 2 Product Overview Features 1 Tri Mode Camera MPG4 1 MPEG4 2 M Jpeg 2 Advance Motion detection trigger AVI Jpeg save on FTP Email 3 3 layers Admin Operator and User Password protected 4 Resolution from CIF 352x192 up to HD 1280x720P 5 Supports NTP protocol to get correct time schedule 6 1 2 5 Advance CMOS sensor with highly sensibility for quick response insufficient lighting 7 Supports HTTP CGI command set Easy for system integration 8 IP Service Search utility to find your IP Kamera on internet with ease 9 Watchdog Event log design 10 Adjustable frame rate bit rate rate control type quality factor for best image quality and speed 11 Supports date and time marking on the captured video and also inserted streamed data 12 Me
14. Hold the right mouse in the live view then release when zoomed to preferred point Zoom out to screen fit Double click right mouse Note When using the mouse to zoom in the snapshot function will not take a picture of the zoomed picture but the resolution size How to Enable and Use EPTZ Controller Note When EPTZ is activated Video Codec mode will be switched to MPEG4 amp M Jpeg when disabled the codec will be set on Mpeg1 Mpeg2 amp M Jpeg Also snapshot function works only with the EPTZ controller and not when using the mouse to EPTZ LW 1 Click on the EPTZ button located on the bottom of the screen of the 9070 Lite PIZ Set 2 If the EPTZ has not been d will be notified that it must be enabled Windows Internet Explorer To active PTZ please check the enable button 3 Select Enable on the EPTZ function then hit the submit button Enable PTZ Enable Disable Submit Once the Speed dome controller is activated you can click on left right up down and zoom buttons to view the picture 00M Ce La 6 AVIOSYS 2 FI International Inc Note To use EPTZ without activating 39 Ref 90020326K0709 7 Controlling the Device CGI HTTP Commands Http commands allow you to control the device with commands The basic commands are provided below There are two ways to input http commands with authorization required Password in http http login password ipaddress port com
15. IP Kamera 9070 Lite User Manual Note 9070 Lite does not include the following 2 My Web and EZ Blog functionality Pre recording technology Connection Lost backup recording Media Player Release Date 10 20 2009 Manual Version 1 1 Ref 90020326K0709 Warning Any changes made to this equipment without permission may cause damages to the device IMPORTANT NOTICE 1 IP Kamera 5 was designed for indoor use it is the responsibility of the user for any possible damages caused by outdoor use especially in the rain 2 Please use the power adapter provided by the dealer the manufacturer responsibility for the possible damage from using power adapters not 3 Do not shake the IP Kamera 9070 Lite in any fashion 4 Please contact the dealer If IP Kamera 9070 Lite is not working properly Copyright 2009 All rights reserved No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written consent of us All trademarks and products mentioned in this document are the properties of us Ref 90020326K0709 Table of Content INTERNET ACCESSIBLE SETUP s ab out pesi Ie SANA sok na bi dan ENERO E NAE eee MX eka ki yo dite nn EAR RAE neuen EN ak ki MURS Tu MAS 9 CONNECTING THE DEVICE 25 kek bak de e dt te aske e ae M ITI IM VPN D IRI 1
16. IP Kamera 9070 Lite Authority Select one of the following options Admin Admin can operate all functions in Web interface Also add or delete any user s account Operator Operators can operate all functions in Web interface except user Add Delete Viewer Viewer can only monitor the Web interface but cannot operate all function and set parameters Light Light Light State ON OFF Submit The Light function is used to turn on or off the LED spotlight located in the front of the 9070 Lite Turn on the light Change the light stage to on and hit submit to turn on the light Light State ON OFF Turn off the light Change the light stage to off and hit submit to turn on the light x m Ref 90020326K0709 Light State OFF Language Setting Language Setting Language English English The language setting section is where you can select the language that you would like to use to use the 9070 Lite Currently there are 3 languages available English Chinese Traditional Chinese Simplified there will be more to come The 9070 Lite will automatically detect the favored language of choice depending the settings used in Windows Update Update Firmware Current Version Description Kernel Version Linux version 2 6 10 mvldO1 IPNC 1 1 0 BcoC Vern U Boot 1 2 0 Apr 21 2008 18 41 45 IPNC U 1 0 2 Firmware Version IPNC APP v1 2 1 1 HTML Version 1 2 23 ActiveX Version 1 0 2 15 Device Vers
17. Zone GMT 08 Taipei Hong Kong Beijing O Automatically Adjust for Daylight Saving Time Changes SNTP Server Enter the SNTP server address Below are a list of free public NTP servers 28 Ref 90020326K0709 Europe europe pool ntp org Asia asia pool ntp org Oceania oceania pool ntp org North America north america pool ntp org South America south america pool ntp org Africa africa pool ntp org Time Zone Enter the corresponding time zone Automatically adjust for daylight saving time Check this section if you want daylight saving time to be implemented automatically IP Service IP Service Gk network IP Service Server Information below E FTP UB E SMTP Enable IP Service A snip IP Service Server Kamera Server Title 9070 Country remark1 City remark2 MAC 0090710000c2 Note Use the MAC address value when using CNT With IP Service the user will not have to remember long IP Address numbers Just enter the name of your device into IP Service and as long as the device has been correctly port forwarded the user will easily be able to connect to the device This section allows you to turn of this service By default IP service is On Click disable to close this feature System Date and Time 23 Time stamp amp Users w Light 3 Reset Autotimer Language Setting A Update Events The system section allows you to setup the IP 9070 Lite s system
18. ake snapshots using the EPTZ function Ans When using EPTZ function remember that only the snapshot functions works with the EPTZ controller If you are just using the mouse to Pan Tilt and Zoom into your picture you the snapshot button will not capture the screen correctly A way you can take a picture of the screen using the EPTZ with the mouse is to click on the print screen button on your computer Q5 Why is the RTSP not connecting to my VLC player or Quick time Player Ans To use the RTSP functionality it is necessary to first set your 9070 Lite to be the DMZ host in your network Also be sure to port forward your device at the following ports Port 554 for 1280 x 720P Port 8554 for CIF format Please refer to the routers manual on how this is setup Q6 How do improve the image quality on this device Ans The Image quality of the 9070 is dependent on the bit rate of the device With a larger bit rate the device will naturally create higher quality image but this will affect the smoothness of the streaming when accessed through the internet To find the most optimal settings for image quality and streaming smoothness try different bit rate settings to achieve the best fit settings 45 Ref 90020326K0709
19. asured End to End latency is less than 150ms 13 Supports adjustable backlight brightness contrast saturation amp sharpness 14 TV Output capabilities 15 Built in LED Spotlight 16 CNT Technology Just Plug and Play no need to port forward 17 EPTZ Electronic Pan Tilt and Zoom 18 Scheduler recording capabilities 19 Email Capabilities 20 Supports HTTP Web Server HTTP SSL FTP client SMTP client NTP client DHCP client UPnP client RTSP over UDP RTP Specification Casing Lightweight plastic Case Color Black Weight 105 Grams 0 231 Lbs Dimensions W x L x H 108 X 58 X 28mm Operating Conditions 5 50 C 41 122 F Humidity 20 8096 RH non condensing Power AC Adaptor Input 100 240V 0 3A MAX 10 20VA 50 60Hz Output 45V 1 0A Max 5W Ref 90020326K0709 Package Contents 1 9070 Lite Unit x 1 2 9070 Lite Installation CD One AC adaptor will be included and will correspond 3 AC Adaptor to the countries power standards Specs Input 100 250Vac 47 63Hz 1A Output 5Vdc 1A 4 Camera Mounting Bracket 5 RJ45 Cable x 1 Optional Ref 90020326K0709 3 Interface Description Rear Panel View Rear View Device Reset Reset to Manufacturer Default Hold Reset button for 5 10 Seconds and the device will reset to manufacturer default Video Out The Video out requires a RCA connector to output video to a different source RJ45 Ethernet Plug in the RJ4
20. d 12345678 1 Double click on the IPEdit icon to run the program W IPEdit Internet online devices f IP Server Server 2 pisce Device Name m ven Connected to Server 2 Device Name Mac Address IP Address Local Devices 9258 WIFT 192 169 100 26 IPCAMO9070 192 168 1 168 IPCAMOQ70 192 168 1 169 Name 192 168 1 80 IP2258PRO 192 168 1 31 Gateway 9268 192 168 1 23 D6 IP9258 192 168 1 144 IP Address dig 7777 168 1210 Ene HTTP Pott HTTP Pora DG MAC enn C d Q Rescan m Update F1 Help Wa g 2 Open IPEdit and any device in the same network should automatically be detected and listed in the local devices sections Note If the device is not showing up please hit the rescan button and wait about 1 minute a li Ref 90020326K0709 Local Devices 070 192 168 1 168 Gateway kl a a w IP Address Netmask Ek w e a HTTPPo 0 0 SL 3060SL3 192 168 100 203 HTTP Port2 0 dd Rescan Es Setup the Device All devices will need to be on the same network if not the device cannot be accessed and will not be detected Quick Easy Setup Recommended M 1 Click on the REF button and wait a few seconas IPEdit will automatically detect the network settings an
21. d fi Save setting 4 Once your settings have been set hit the submit button to save all changes Enable Alarm 2 Enable Alarm Alarm Application Enable Setting Motion Detection Enable Alarm Upload Via FTP E Enable Alarm Upload Via 2 SMTP Recording Time 10 seconds C Enable Alarm Recording Buffer Buffer Time 10 seconds Note For Alarm Recording Buffer to work correctly an alarm above must be activated Enable Alarm Upload 5 rrp When motion is detected the IP Kamera 9070 Lite will upload the video file to the selected FTP Enable Alarm Save amp smtp When motion is detected the IP Kamera 9070 Lite will send the video file to in a E mail format Recording Time Set the duration of time you would like the IP Kamera 9070 Lite to record when alarm is set off _ 38 Ref 90020326K0709 EPTZ Set The EPTZ allows you to Pan Tilt amp Zoom the image that you are viewing To activate this feature EPTZ must be enabled in the Image section of the 9070 Lite Enable PTZ Enable Disable Note When EPTZ Controller is activated Video Codec mode will be switched to MPEG4 amp M Jpeg when disabled the codec will be set on Mpegl Mpeg2 amp M Jpeg How to use EPTZ with the mouse On the Live view Video screen the EPTZ controls are Zoom In Click and Hold the left mouse in the live view then release when zoomed to preferred point Zoom into highest Double click left mouse Zoom out Click and
22. d setup the device 2 Once settings have been detected hit the apply button to apply the new settings REF Setting Name Gateway IP Address Netmask APPLY 3 Hit yes to confirm and Enter the login and password for the Device to Approve changes User Name amp Password User Name admin Password nes Yes Mo l 4 Then hit the rescan button on IPEdit to confirm the changes have been made 13 Ref 90020326K0709 M IPCam 9070 Gateway 192 168 100 1 IP Address 192 168 100 2 Netmask 255 255 255 0 HTTPPott 60 HTTPPot2 fB MAC 003070666565 Custom Setup Advance Users 1 Highlight the device on the local devices section and on the right side of IPEdit all network information on the device will be displayed If the device is not on the same network a Red Exclamation mark t will appear in the IP Network information section Input Ref Button fif ils Mame IPCam 9070 Gateway 192 178 100 1 IP Address 132 178 100 2 Metmask 235 255 255 D HTTP Forti 90 HTTP Part2 0 a t DHCP Static 2 To setup the device you will need type in the correct Gateway and IP Address The Gateway Address The gateway address can be obtained in Windows under the network connections page 1 Local Area Connection Status General Support Connection status J Address Type Assigned by DHCP CA IP Address 1
23. ddress provided by the ISP Ref 90020326K0709 Requires Static IP Address to Access the Internet 9070 In this case the 9070 Lite is being connected to the internet through a hub which is different from a router The hub does not provide DHCP and therefore would require that this setup have a static IP Address that is provided by the ISP Contact the ISP to find out the static IP address so that your device can be accessed through the internet Once a Static IP has been assigned the device will be able to automatically go onto the internet Connecting the Device 1 Connect the IP Kamera 9070 Lite to a HUB or Router with a RJ45 network cable 2 Connect the HUB or Router to the internet May through ADSL XDSL modem 3 Connect the power adapter to the DC 5V port of IP Kamera 9070 Lite 5 Software Setup The software for the device is located on the Media Link IP Family CD that came with the device IP Kamera Pack is located on the main page of the CD Please follow the directions carefully and install the necessary files Software for IP Kamera 9070 Lite 1 First place the Media Link IP Family CD that came with your device into your CD DVD Rom drive The CD should auto run but if it does not go to the CD DVD Rom drive and select the file autorun html 10 Ref 90020326K0709 Mame Files Currently onthe CD AUTORUN doc images OO On Autorun inf autorun h htm T
24. e files will be created there Image The image section allows you to change the Image settings for the device and tune the image of the IP Kamera 9070 Lite Image Settings The Image settings section allows you to change the video settings and the Name of the Kamera 203 Ref 90020326K0709 Image Settings Camera Name IPCAM9070 Video Codec MPEG4 1 MPEG4 2 M JPEG Resolution MA4 720 MA CIF PG 352 Color system NTSC 60Hz PAL SOHz Rate Control CVBR 9 ka Image Settings M JPEG Setting Quality normal Frame Rate 15fps MPEG4 1 Setting Bit rate 640 kbps 64 8000 Frame Rate 30fps MPEG4 2 Setting Bit rate 640 kbps 64 8000 Frame Rate 15 Enable PTZ Enable Disable Submit eo Camera Name Select a camera name for the device and then hit submit Camera Name Video Codec Video Codec MPEG4 JPEG MPEG4 MPEGA JPEG MPEG4 4 JPEG MP Resolution MPEG4 MPEG4 JPEG M4 720P M4 CIF JPG 352 MPEG4 JPEG M4 VGA JPEG VGA MPEG4 JPEG M4 720 JPEG 352 MEG4 MPEGA M4 720 M4 CIF Single MPEG4 Color System Select the broadcasting color system that pertains to your country NTSC 60Hz PAL 50Hz Rate Control Select the Bit Rate Control that fits your needs CVBR Constrained Variable Bit Rate CBR Constant Bit Rate M JPEG Settings The available Quality settings and FPS for the M JPEG settings are shown below M JPEG Qua
25. ea e ee e aa 23 SETTING TIT 23 Dee Ref 90020326K0709 WINE TWA AGE 26 NETWORK c E 27 NETWORK Soo cash fk tt imm Te ep UMS Mt to bc meu I CU 27 ar 27 SMTP OUTGOING E MAIL SERVER 0 ttveeeovoeoeoooeoooooueoououeooooeoooooeooosonesouoeeooooeoooonesoouonesosoneeooeooooneoeouoness 28 SA E LANERO TTE 28 I SERVICE ie a at tty tete e ti sunto 29 SYSTEM ivive dy OU ra a of a kf ak edP c DIVER eO Du eM S a e a ceu n pe RUE UFU E dU ae Ga Me e A RUE 29 DATEAND 29 TIME STAMP 30 OS e EIE T EAF E E A E A P A A E 30 LY AP etc ka tat E A E E E 31 LANGUA EA Tm 32 UPDATE mr eR 32 EVENT OG lp al ak e at PVO Q 34 APPLICATION Bre iya Saa RR 34 SELDPNG S s alo t a usc tate aie ak ae n a e a ak a po MVP EAM ai tr al 35 SCHEDULE isa 36 CGLHTIP COMMANDS n 40 SNAPSHOT COMMAND 42 eds do ge i Sets Ce ie l a ca ese a aa lk E ra kan 40 CHANGE NAME NE ko sei ee ton ose T D te 40 CHANGE IP ADDRESS fett z dot kan e ace a ae os a Rod tec saec e Dan ce e ke a tet seni eee ae 40 CHANGE PORT fi tan na a a a ka a ka a a ese ka eee 40 CHANGE SUBNET IVIASK er
26. he upload path of the FTP Server 27 Ref 90020326K0709 SMTP Outgoing E mail Server SMTP Server Setting To use to E mail function amp Network please enter Outgoing Mail Server SMTP of your E mail Address 8 FTP Server Requires Authentication 2 SNTP Account Name aviosys IP Service Password eeses use SSL connect ON OFF SMTP Server smtp aviosys com port 587 Email Address sales aviosys com Subject IPCam9070 alarm mail a Content Content words should less then 255 z O Live Video E Image Network K System n Application 2 Media Player Enter the SMTP E mail server information here My Server Requires Authentication Check this section if your email requires Server Authentication Account Name Enter then login of the mail account Password Enter the password of the E mail account Use SSL Connect lf the email server requires SSL Secure Sockets Layer this option need Sender Email Enter the Sender Email Address SMTP Server Enter the SMTP Outgoing mail address Email Address Enter the Receiving Email address SNTP The SNTP is a protocol for synchronizing the clocks of computer systems SNTP Server Setting C Network SNTP is a protocol for synchronizing the clocks of computer systems over packet switched variable latency data networks please setup the correct SNTP server information E mail SMTP SNTP Server tw pool ntp org IP Service Time
27. hedule automatic recording You can pick a day from Sunday Saturday and also a option for Everyday To schedule automatic recording 1 Select the day that you would want to start recording 2 Select the From time and the To time 3 Once the schedule has been created hit the submit button to apply the new settings Schedule Record Pn Enable amp chedule Record Schedule Record Application Enable Setting Schedule Record Upload Via FTP Submit Schedule Record allows you to select where the schedule will record the video files to Schedule Record Upload Via FTP Saves schedule recordings into FTP Alarm Motion Detection Detection Motion Detection Click the right mouse button to show the popmenu Save the setting after you finish editing Motion Detection Enable Disable Lowest Customized Threshold To enable motion detection 1 Select Enable in the motion detection option 2 Select the sensitivity of your choice a You can pick from Lowest Low Medium High Highest b You can also customize your own threshold from 1 99 3 Once you have set your settings on the window screen click on the picture where you want the motion to be detected Double click on the selected areas to remove the choice s A Ja Ref 90020326K0709 A ee 4l You can right click on the window screen for more options Restore Sa
28. ing CNT 1 On Surf 16 Ch DVR software right click on the screen on one of the windows and select Add Camera Surf16CH CkaeCamera Ft fit atis Gi PES 180 e 7 Buren earch Cher dwe fatig Lazi Setting 2 Then under the section labeled MAC Type in the MAC address AddCamera IP Address Port 80 CameraName UserName Password poen NormalQuality Rotation 180 Record MD Snapshot Interval sec 0 MD Start Record Duration sec 0 Add 3 Do not forget to enter the password and login 44 Ref 90020326K0709 10 Frequently Asked Questions F A Q Q1 Why can t view the video files that have recorded nothing is playing Ans VLC Codec you can download VLC Codec from their website at Q2 How do reset the device to manufacturers default values Ans On the back of the device there is a reset button hold down the reset button for more than 7 seconds Then give the 9070 Lite a 1 minute to restart Once the device has restarted it will be set back to manufacturer default settings Default Values Default IP 192 168 1 168 When 9070 Lite is connected to PC directly Default Login Admin Default Password 12345678 Q3 Why does the device on EPTZ change my video mode Ans When EPTZ is activated Video Codec mode will be switched to MPEG4 amp M Jpeg when disabled the codec will be set on Mpeg1 Mpeg2 amp M Jpeg Q4 How do t
29. ion 93070 Update the device with the latest firmware Specify the firmware to update and diick Note Do not disconnect the power of the device during the device needs to be restarted after the update has completed Warning IPCAM will restart immediately eo The Update Firmware section is where information on the 9070 Lite is displayed Ref 90020326K0709 The Kernel Version Uboot Version Firmware Version and other technical information on the device is displayed here Updating the Device To update the device go to the update section Here you will find the Current Version description To update the device 1 Browse for the correct update Branse 2 Hit the update button 3 A message will appear reminding you not to disconnect when updating Windows Internet Explorer Note Do not disconnect the power of the device during the update The device needs to be restarted after the update has completed 4 Please view the bar on the bottom of internet explorer to make sure that the device is updated TEE Se http 58 114 176 99 8085 update cgi 5 When update is complete new screen will appear then connect back to your device File create success File system update success Firmware update success go back Warning Before you go to the next step make sure you have all your setting information written down The device will re
30. lity Settings 24 Ref 90020326K0709 M JPEG Frame Rate Settings 15 EPS Bit Rate Select a value from 64 8000 PSPS FPS Select a FPS from 30fps 15fps or 7 5fps Bit Rate Select a value from 64 8000 FPS Select a FPS from 15fps or 7 5fps Enable EPTZ The EPTZ on the IP Kamera 9070 Lite a virtual EPTZ function This function allows the user to control the video on the Live Video mode by moving left or right Zooming in and zooming out To use the EPTZ mode 1 Enable the EPTZ function and then hit the submit button Enable PTZ Enable Disable 2 Click on Live Video Mode Live video 3 Click on EPTZ Set and a new control window will pop out http 192 168 100 168 ptzhtm Windows Internet Explorer leslie Mes Z00M AVIOSYS LA Laj La International Inc Lin From here you can control the live videos Zoom Function and direction Also once EPTZ is enabled in the Live View Screen buttons will appear on the bottom for you to pan tilt and zoom Note PTZ is only available in the mode below When you enable PTZ it will automatically jump into that mode Video Codec MPEG4 JPEG M Resolution M4 VGA JPG VGA v 25 Ref 90020326K0709 Tune Image The tune image settings section allows you to control and tune the picture quality of the image Keep in mind the quality of the picture will also be affected by the quality of the lens that is being used Image Fine Tune
31. mand Password not in http http ipaddress port command Note If you use the password not in http command you will need to enter it when the browser asks for the password Snapshot Command The snapshot command takes a snapshot of the camera in the current view http ipaddress port snapshot cgi Ex http command http 192 168 100 50 85 snapshot cgi Change Name This command allows you to change the name of the IP Kamera 9070 Lite http ipaddress port vb htm cameratitle name Ex http command http 192 168 1 192 vb htm cameratitle test 9070 Lite1 1 Change IP Address This command allows you to change the IP Address of the IP Kamera 9070 Lite http ipaddress port vb htm internetip ipaddress Ex http command http 192 168 1 192 vb htm internetip 192 168 1 191 Change Port This command allows you to change the Port of the IP Kamera 9070 Lite http ipaddress port vb htm httpport portnumber Ex http command http 192 168 1 192 vb htm httpport 1025 Change Subnet Mask This command allows you to change the Subnet Mask of the IP Kamera 9070 Lite http ipaddress port vb htm subnetmask subnetmask 40 Ref 90020326K0709 Ex http command http 192 168 1 192 vb htm subnetmask 255 255 0 0 Note Default subnet mask is 255 255 0 0 Change Gateway This command allows you to change the gateway the IP Kamera 9070 Lite http ipaddress port vb htm gateway gatewayaddress Ex http command
32. n how to port forward your device 6 Web Interface Connecting to the 9070 Lite Once the 9070 Lite has been setup correctly and access your IP Kamera 9070 Lite An Internet Explorer browser screen pop up with the login screen Connect to 192 168 1 168 The server 192 168 1 168 at IPCAMSU7D requires Username and password Warning This server is requesting that your username and password be sent an insecure manner basic authentication without a secure connection User name admin Password Remember my password Default IP 192 168 1 168 When 9070 Lite is connected to PC directly Default Login Admin Default Password 12345678 1 After you have logged into the device you will be required to install active x controls If this screen does not appear make sure you allow active x 16 Ref 90020326K0709 z Sa Intemational Inc MOTION ACTIVE DETECTION RECORD Please install the ActiveX component to enjoy the A V stream 2 Right click on yellow bar and install the activeX controls 1 Right Click on the yellow bar and select install Active X Controls and the add on and want to install it cick nere nstall Activex Control What s the Risk ACTIVE ITON ACTIV ETECTION RECORD More information Internet Explorer Security Warning Do you want to install this software Le Mame S070ocx Publisher AVIOSY5
33. na p5hot Path Snapshot Path SnapShot Path CX Get Folder Path The Snapshot path is the location where the snapshot pictures will be saved onto your computer The default snapshot path will be set to CX To select the snapshot path click on the button and select the folder where the snapshots will be saved Video File Video File Video File AVI Duration Second s AVI Format MPEG4 720 If AVI duration is that means you insert the SD card Beacuse at the same time MPEG recorder only can work in the SD card If you want to save MPEG on the FIP or SMTP please remove SD card Select the Video File format that the device will record in This setting will affect the FTP and the SMTP Email video formats 1 Avi Duration From the drop down list select the length of an AVI file 2 Avi Format MPEG4 720 MPEG4 CIF 3 Hit the submit button to confirm new settings FTP Note 1 Before you use the FTP function you will need to set the FTP server information You can click on the FTP Networking ink to take you to the FTP setup section 2 If the SD Card is inserted into the device the 9070 will only be able to record in M Jpeg mode to the FTP Ref 90020326K0709 FTP Application Setting FTP Networking FTP Server 192 168 1 1 Port 21 User Name File Upload Path defualt_folder Storage Setting File Format JPEG v Lefted the SD Card or Select other image Setting than
34. ncy it should be 70 80 based on PC s performance Advanced RTP RTSP SDP demuxer using Live555 gt f Audio ffi Input Codecs Sy ot ORTA Use RTP over RTSP TCP Audio codecs Client port Force multicast RTP via RTSP AVI Tunnel RTSP and RTP over HTTP HTTP tunnel port Avformat DV Caching value ms Kasenna RTSP dialect Dump H264 RTSP user name guest Lua Art RTSP password guest MJPEG MOD MPEG 4 V MPEG TS Matroska PS Playlist RTP RTP RTSP Show settings Note If the video is not smooth set the caching value from 150 1200 This problem could be due to too much congestion busy pc and etc 7 Save the new settings VLC media player Seles Media Audio Video Playback Playlist Tools Help gt Open File Ciro Ini Advanced Open File 7 Open Folder Ctrl F 9 Open Disc Ctrl D E Open Network Options Allow tineshiFting 10 Type in the RTSP address of your device For Mpeg4 Stream1 rtsp lt IP Address gt mpeg4 For Mpeg4 Stream2 rtsp lt IP Address gt 8554 mpeg4 Example rtsp 122 116 137 123 mpeg4 42 8 Then go back to the VLC media player and go to Media Advance Open File 9 Next select the network tab and under the protocol select RTSP Ref 90020326K0709 CJ Ele be Dis Network BS Capture Device GS Be Network Frotocol Protocol Address t5p 1 122 116 137 123
35. o store the file Then hit okay Browse for Folder Please select the record path C Documents and Settings Jerry My Documents Documents My Documents 2 9212 Manual Web ACT AdobeStockPhotos C3 Aviosys List 2 Demo92AP Downloads 2 DVDFab 4 12 For Hamsha amp David 3 the folder has been selected the device will start to record To stop recording click on the red icon and it will return to the original state Note Remember the VLC codec is required to play the video files that are recorded Snapshot Snapshot The snapshot function creates a easy way take pictures of the current view in the IP Kamera 9070 Lite To setup the snapshot destination folder 1 Click on the Application link on the bottom menu 2 Then select Snapshot path Setting MT SnapShot Path 3 In here browse for the location where snapshot pictures will be stored By default the snapshot path will be in C 29 Ref 90020326K0709 Snapshot Path SnapShot Path Browse for Folder Please Select Snapshot Folder Desktop gt Network Control Panel YE Recyde Bin Administrator m Public jE Computer amp Local Disk C ga Local Disk D PRESARIO RP E DVD RW Drive F To use the snapshot function 1 Click on the snapshot button SHANA HI 2 In explorer go to the selected path and th
36. om Out 2 x Right Mouse Quick Zoom In 2 x Left Mouse To Zoom In To Zoom into the picture move the mouse cursor over the picture and click and hold the left mouse To Zoom Out To Zoom out of the picture move the mouse cursor over the picture and click and hold the right mouse Quick Zoom In Quick zoom in is used to quickly zoom into the maximum zoom of the picture To use this function on the picture double click the left mouse Quick Zoom Out Quick zoom out is used to quickly zoom into the maximum zoom of the picture To use this function on the picture double click the right mouse Motion Detection Motion Detection The motion detection icon will display when motion has been detected This setting must be activated in the application section No Motion Detected M DETECTION Motion Detected Active Record Active Record Active record will show up when the device is actively recording Active recording functions like motion detection scheduler or an alarm will set off this automatic recording Automatic Recording Inactivated 2 Ref 90020326K0709 MOTOM RECORDS Automatic Recording Activated A MT Rta RECORD Record Record The record button on the 9070 Lite when pressed will record the live video feed and save the video into the computer viewing To record follow the following steps 1 Click on the record button REC an 2 Then select the folder that you would like t
37. set back to manufacturers default values after you restart the device You will need reconfigure the IP Kamera 9070 Lite including Email FTP IP Address Gateway and etc 6 Enter update page then hit the restart button 7 Then make sure you re setup the device 2 4 42 Ref 90020326K0709 Event Log Event Log Item Date and Time 2000 01 01 09 05 13 2 2000 01 01 08 33 43 3 2000 01 01 08 13 42 4 2000 01 01 08 08 05 5 2000 01 01 08 05 03 6 2000 01 01 08 04 53 7 2000 01 01 08 04 43 8 2000 01 01 08 04 33 9 2000 01 01 08 04 04 10 2000 01 01 08 03 46 11 2000 01 01 08 03 35 12 2000 01 01 08 03 25 13 2000 01 01 08 03 15 14 2000 01 01 08 03 04 15 2000 01 01 08 02 53 16 2000 01 01 08 02 28 17 2000 01 01 08 02 16 18 2000 01 01 08 02 06 19 2000 01 01 08 01 55 20 2000 01 01 08 01 51 Application Setting TF SnapShot Path EM video File KB B sp Card E mail SMTP 3 EZ Blog 2 Media Player fi My We Schedule Record e Schedule Enable Schedule Record Alarm Motion Detection Enable Alarm admin login on 192 168 100 16 admin login on 192 168 100 16 Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm Motion alarm admin login on 192 168 100 15 eo Ref 90020326K0709 Settinq Snapshot Path T s
38. tart the web browser and reconnect to the newly configured network information 8 Frp Network settings can be modified below Static IP addressing is enabled E E mail SMTP zi SNTP IP Address IP Service Local IP Address Subnet Mask Default Gateway DNS Server Port 80 80 or 102565535 MAC Submit The network section allows you to setup the network information for the IP Kamera 9070 Lite IP Address Actual IP Address of the device can be found here LAN IP Address Local Area Network Address Subnet Mask Subnet Mask information Default Gateway Default Gateway Address DNS Server Domain Name System Address Http Port Enter the port that you would like MAC The Mac Address information can be found here Note Make sure you click on the Apply button to save any changes made FIP Server Setting FIP is a network protocol used to transfer data 65 Network please setup the correct server setting E mail SMTP Server 230 135 169 137 Port 21 snip User Name guest T IP Service Password essesesese File Upload Path root Submit The allows the user to easily save 5 onto FTP server With the 9070 Lite Video Files 8 Picture files Jpeg can both easily be saved onto the FTP server Make sure the following information is filled out correctly FTP Server Enter the FTP server address here User Name Enter the FTP Username Password Enter the FTP Password File Upload Path Enter t
39. u have selected Then the user can connect to IP Service type in the device name and connect directly to the device Note The IP Kamera 9070 Lite requires you to select Server 2 on IP Service 1 Open IPEdit the device will show up in the Local Device Section If you have not selected a name for the device please refer to the section on the manual labeled Naming your device 2 To start IP Service Hit the green connect button on the top of IPEdit dj IPEdit Internet online devices IP Server Device Mame Not Connected 3 Once you have been connected search for your device by typing in at least the first 3 letters that you named your device with Then hit the search button 15 Ref 90020326K0709 Internet online devices m ki IP Server pervert Disconnect Device Name 9070 15 Search Connected to Server 2 Mac Address IP Address 9070 cathy9U 009070000020 apga 125 225 97 213 2 9OTO 9070 OOS07 0000017 ra Mts 143252 519 2 Q070 Jena ho OOS0 70000005 an 50 114 176 99 2 9070 1 019070 009070000003 zu 561 220 40 19 s Local Devices 4 Double click on your device and an Internet Explorer window will appear connecting directly to your device Note It is crucial to have the IP Address of the device port forwarded from the router that you are using SO you can connect to your device from anywhere Please refer to your routers user manual o
40. you can select more option Image Settings Beacuse at the same time MPEG recorder only can work in the SD card If you want to save MPEG on the FIP or SMTP please remove SD card In the FTP section you can set the file format that you would like to use for FTP transfer E mail SMTP E mail SMTP SMTP Application Setting SMTP Networking SMTP Server 192 168 1 1 Email Address a aa bb Storage Setting Attatched File Numbers 5 1 20 Attached File Format MPEG4 v In the settings section you can find the SMTP information by clicking on the SMTP tab Here you can see the current SMTP Server information and email address Storage Settings You can also select the file format in which you would like the IP Kamera 9070 Lite to send Select from MPEG4 or MJPEG Schedule Record nthe i Schedule Schedule 51 E Monday w From 10 30 v 22 vi 35 e EL B Tuesday From 39 11 51 Wednesday Fram 03 Y l 23 19 Yi e Thursday From 00 00 v To 00 00 v El Friday From OD DO Tao OD 00 B saturday From O00 00 Tao 00 00 il S Sunday From 00 00 To 00 18 B x CONO oar ma 10 30 22 39 ill 03 23 19 23 Cosi COs E LET C0300 36 Ref 90020326K0709 The schedule allows you to select days and times that you would like to sc

Download Pdf Manuals

image

Related Search

Related Contents

Manual del usuario L300 - Epson America, Inc.  MANUAL DEL USUARIO  User Manual  USER`S MANUAL - Sophie Systems  Samsung Q1657AT Наръчник за потребителя    南砺市の将来へ青写真を描く「平成18年度当初予算」決定!  取扱説明書 - M  CS-4125A  

Copyright © All rights reserved.
Failed to retrieve file