User Manual - AV
Contents
1. 2 Turn on the PC and allow Windows to start 3 The StarBoard Software starts automatically If the Startup checkbox was not checked during the shortcut creation process when the software was installed the StarBoard Software will not start when Windows opens In such cases start the StarBoard Software manually For further details see the StarBoard Software Installation Guide or StarBoard Software Online Help Manual Startup Either select Start All Programs Je StarBoard Software or double click the StarBoard Software icon on the desktop The StarBoard Software icon 15 not created on the desktop unless the Desktop checkbox 15 selected during the shortcut creation process when the software 1s installed 2 1 English StarBoard T 19WX Usage 2 1 2 Start Method Mac OS version This section describes how to turn the StarBoard on for Mac user 1 Turn on the StarBoard power Push the power button 2 Turn on the Mac and allow Mac OS to start 3 Select Go Application StarBoard Software to start StarBoard Software 4 Select MENU on the StarBoard Software toolbar Settings StarBoard Check Connection and then check the connection If the StarBoard is not connected message appears StarBoard Software has not detected the StarBoard Check whether the StarBoard and PC are connected properly SiurBoard nat connected gt If they are con2. 9300K 6500K USER SRGB _ COLOR TEMPERATURE RETURN USER Used to adjust the red green and blue colours of the screen 0 100 GREEN 2 BLUE RETURN RETURN Used to return to the previous page 5 MODE Used to turn mode ON and limit brightness setting from 0 to 20 to reduce power consumption ECO MODE OFF RETURN Used to return to the previous page 6 LANGUAGE Used to select the display language The following languages are available Japanese English French German Spanish Italian and Chinese LANGUAGE ENGLISH FRANCAIS DEUTSCH ESPANOL ITALIANO AX RETURN RETURN Used to return to the previous page 2 9 English StarBoard 1 19WX Usage 7 OTHER SETUP OTHER SETUP SMOOTH Used to adjust the smoothness of the image 0 3 Use is not possible at a resolution of 1440 x 900 WXGA OSD H POSITION Used to adjust horizontal position of OSD window 0 100 OSD V POSITION Used to adjust vertical position of OSD window 0 100 OSD TRANSPARENCY Used to turn OSD window background transparency ON OFF OSD TRANSPARENCY RETURN OSD TIMEOUT Used to set the amount of time before the OSD menu closes automatically 0 60 VOLUME Used to adjust the speaker volume 0 100 MODE MESSAGE Used to turn the screen resolution display ON OFF MODE MESSAGE OFF 191 RETURN RESET Used to reset OSD menu settings to their de
3. e g 1f pen input 15 cut off change the battery as described below Note that battery life is approximately 1 800 hours under normal usage If the residual quantity of a battery decreases the centre of a side button will light up red If the centre of a side button lights up red change the battery as described below Be sure to install batteries correctly Do not install batteries with positive and negative terminals reversed or use batteries other than the type specified It will cause pen malfunctions and excess heat or burns to the hand Be sure to provide insulation during disposal Be sure to insulate the positive and negative terminals of the battery using cellophane tape or similar material when disposing of batteries Disposing of batteries without insulating them may lead to overheating bursting or ignition due to shorting resulting in personal injury or fire Furthermore be sure to follow all local rules and regulations regarding proper battery disposal If within the EU be sure to follow Batteries Directive Batteries directive 2006 66 EC 1 Turn the stylus pen grip to separate the two halves 2 Remove the AAA alkaline dry cell battery contained in the grip and insert a new cell with the positive side facing the pen tip Negative side Positive side 2 5 English Usage 3 Put the stylus pen back together When changing the battery be careful not to close the pen s rear part too forc
4. Do not use this product in a location with high temperature or high humidity This product s usage environment conditions Temp 50 F to 95 F 10 C to 35 C Humidity 30 to 80 But no condensation may be allowed to form 6 English StarBoard 1 1 Safe Handlin Careful thought was given to the cautions on this device and in this user s guide However unanticipated circumstances might occur When operating this product users themselves must exercise caution as well as follow instructions Warning Details Use the AC Adaptor supplied with this product Use only AC Adaptor or power cables specified by the manufacturer Use of improper adaptors or cables can damage the product or cause a fire Caution Details 0 Caution Details Hold the body firmly and slide the stand slowly when adjusting it When adjusting the stand if you pull up the lever without holding onto the body the body may move suddenly resulting in unexpected injuries or damage to the body Securely connect the earth to the earth terminal Failing to do so may result in an electric shock or malfunction Be sure to install batteries correctly Do not install batteries with positive and negative terminals reversed or use batteries other than the type specified It will cause pen malfunctions and excess heat or burns to the hand Be sure to provide insulation during disposal Be sure to insulate the positive and negative terminals
5. the pen tip against the display with a suitable amount of force and then move the pen while keeping it pressed against the display without releasing it from the display The permitted stylus pen input angle range 1 30 in any direction from a position where the stylus pen is perpendicular to the display surface Note that if the pen is tilted at an angle greater than 30 its coordinates may not be input correctly 2 3 English 8 Usage 2 2 3 Stylus Pen Settings The stylus pen has one pen tip button and two side buttons Mouse actions can be assigned to these three buttons The default button settings are summarized in the following table Button User action Corresponding mouse Corresponding mouse action Windows action Mac OS Pen tip Press the pen tip against Mouse left click Primary mouse button the display click Side Button Press the button with the Mouse left double click Secondary button click No 0 pen tip slightly removed from the screen 5 mm or less Side Button same as above Mouse right click Primary mouse button No 1 double click Pen tip Side Button No 1 Side Button No 0 This function can only be changed in Windows For details on changing the button settings see the StarBoard Software Online Help 24 English StarBoard 1 1 IWX Usage 2 2 4 Changing the Battery in the Stylus Pen The stylus pen contains a single AAA alkaline dry cell battery If the pen begins to operate erratically
6. the product must be repaired so please contact them If the customer sends the product to our company without RMA Return Merchandise Authorization number it might not be covered by warranty 6 As a rule the customer 1 responsible for shipping charges required to send all or part of the product for repair etc Our company will assume responsibility for the return shipping to the customer 7 This warranty does not cover labour fees for repair associated equipment assembly or disassembly 8 Incidental damage caused by the failure of this product e g loss of profit that should have resulted from the use of this product 1 outside the scope of this warranty 9 The aforementioned provisions define this warranty and they supersede those of all express or implied warranties that include legal defect liability 10 This warranty is limited to use of this product within the country where the user bought this product 3 8 English
7. 4 English StarBoard 19WX Appendix Compatible Modes L we pem 0 ais y 60x480 072 39 y Sawo 35 SVGA 80x60 329 80x60 48 80x40 75 469 XGA 104x768 60 4 094x768 70 s P torsos 70 SHS SXGA 1280 x 1024 64 0 s o WXGA 1440x900 359 Mdx90 70 6 3 5 English StarBoard 19 Appendix 3 3 How to Take Care of the StarBoard Please clean your StarBoard periodically so it will continue to work for a long time 1 Cleaning and care Usea dry soft cloth to clean the StarBoard display surface Do not use detergents e Usea diluted detergent without abrasives to clean StarBoard cabinet area Do not use undiluted detergent rather mix with water and soak a soft cloth in the mixture Wring out cloth thoroughly before wiping e Be careful not to scratch the StarBoard surface with fingernails or other hard objects That or bumping the StarBoard can damage it Never use gasoline thinner or other solvents That can cause the cabinet to degenerate and printed areas to peal off 3 4 Consumables 1 Pen tips for Stylus pen 2 AAA alkaline dry cell Enquire at the place of purchase or with technical support for information on how go get replacements 3 5 LCD Panel 1 Please note that even though the LCD panel is produced using extremely high precision techn
8. SB cable 1 5m 9 Audio cable stereo mini plug Pen tip replacement pin set StarBoard Software DVD ROM StarBoard T 19WX Startup Guide StarBoard Software Startup Guide Warranty Sheet 1 The quantity of power cable is depended on the region 1 2 3 4 14 1 2 English StarBoard 1 1 Introduction 1 3 Part Names and Functions 1 3 1 Front Screen D 2 S 1 LCD and tablet operating area 4 Front switch panel Receives text and graphical These switches are used to turn the information entered with the stylus power ON OFF enter OSD menu pen and transmits the data to a PC settings and adjust the volume 2 Stand bottom of body and back 5 Function buttons The stand serves to hold the Eight standard functions used by the StarBoard in place The LCD angle StarBoard software are assigned to can be adjusted in the range of these buttons For details on approx 14 to 66 function button initial settings see For details on the angle of the LCD 1 3 4 Function Buttons on page display surface see page 1 8 of this 1 6 of this User s Guide User s Guide 3 Speakers The supplied audio cable can be used to connect to the PC to allow audio output from the speakers 1 3 English StarBoard 1 1 Introd
9. StarBoard 19WX StarBoard T 19WX User s Guide Read this user s guide and carefully retain it for future reference Before using this product carefully read and fully understand the safety instructions Store this User s Guide nearby for ease of reference T19 ML110801 Hitachi Solutions Ltd English StarBoard 19 Notices Reproduction or reprinting without permission of this manual or any part thereof is prohibited The contents of this manual are subject to change without prior notice Every effort has been made to ensure that this manual is complete and correct However should any questionable points mistakes etc come to your attention please inform the vendor Please be advised in advance that this company will assume no responsibility for losses etc resulting from the operation of this product regardless of the preceding clauses Disclaimers Hitachi Solutions Ltd assumes no liability and makes no warranty either express or implicit regarding the contents of this user s guide Also the company makes no warranty as to the product s suitability merchantability or fitness for a particular intended use products of Hitachi Solutions Ltd described in this user s guide are presently for sale or are site licensed Users who purchased the aforesaid product s will bear the costs of all required services repairs and damages resulting from defects in this product and will bear the
10. StarBoard is not Is the USB cable connected Connect USB cable to PC For details recognized properly on how to connect see 1 4 3 Connection Procedure on page 1 9 of this User s Guide Was system startup done in Start up system in proper order For the proper order details on how to start up the system see 2 1 Start Method on page 2 1 of this User s Guide StarBoard Software may be Uninstall StarBoard Software and then damaged or did not install reinstall For details on how to install correctly StarBoard software see StarBoard Software Installation in StarBoard Software Installation Guide wr technical support 3 1 English StarBoard 19 Appendix Stylus pen related problems Check this And do this Stylus pen does not operate StarBoard Software may be Uninstall StarBoard Software and damaged or may not be then reinstall For details on how to installed correctly install StarBoard software see StarBoard Software Installation in StarBoard Software Installation Guide Is battery worn out Replace stylus pen battery For details on how to change the battery see 2 2 4 Changing the Battery in the Stylus Pen on page 2 5 of this User s Guide Is pen tip worn down Check if the pen tip is worn down or is too short For details on how to replace the stylus pen tip see 2 2 5 Replacing the Stylus Pen Tip on page 2 6 of this User s Guide Are there any electronic This prod
11. WFobod dob OR d o t aa B go d EB RB E HB Bou E E NH E B H E BH HR E BH om E E E BH H WU E BH E BH HS E r m WV 8 BH T W bh NH PV RH N T B HW W H T b NH Y RB H TV B NH T H T BH H V NB HW HM NH E BH BH Eb BH H E H Hd EH H d B M E NH H b E E B d B B H d 1 1 1 i 5 os ri 14 en T T E Lent 2 ay z z i t 1 1 8 English StarBoard 1 1 Introduction 1 4 3 Connection Procedure Before Connecting Equipment Install the StarBoard Software on your PC before connecting equipment Equipment may not function normally if connections are made without first installing the software Use the AC Adaptor supplied with this product Use only AC Adaptor or power cables specified by the manufacturer Use of improper adaptors or cables can damage the product or cause a fire Securely connect the earth to the earth terminal Failing to do so may result in an electric shock or malfunction Follow the procedure below to connect the PC and StarBoard StarBoard To power outlet Projector Display Other external equipments 1 9 English StarBoard 1 1 Introduction 1 2 3 4 5 6 How to install StarBoard Software For details on how to install StarBoard software see StarBoard Software Installation in StarBoard Softwa
12. cedures 2 1 V1 900 MN LC 2 1 2 1 Start Method Windows VersiOn on ee eee 2 1 2 12 Start Method Mage OS version 2 2 2 3 224b Howto Use the SYMS 2 3 2 2 2 Bastc stylus Pem 2 3 2 2 OLY IUS Deli SOLI TD S ossa oe i petes emt 2 4 2 2 4 Changing the Battery in the Stylus 2 5 2 2 5 REPIACING the Oly MUS Pen DID assetto dd de duet dodge a I et beds 2 6 2 7 2 31 OSD Buttons and Their Functions 2 7 OSD Adjustment eiit ilr Dates suits sies 2 8 3 1 S JODEOUIDIOSHOOLIHP a a a 3 1 3 29 Vstetm SPCCIHCANONS sso tont Mau n MEI IE IM EE 3 4 3 3 How to Take Care of the StarBoard 3 6 a ah 3 6 o NE 3 6 3 6 Provisions of Product Warranty 3 7 g English StarBoard 1 1 Introduction 1 Introduction 1 1 Preparations before Use This section covers preparations before using the StarBoard Please read this section thoroughly if you are using the StarBoard for the first time 1 1 1 Product Overview StarBoard T 19WX 15 a convenient and easy to use tablet type interactive electronic board that lets you operate a PC with a stylus pen and write text an
13. costs of direct or indirect damages including the loss of profits or required information that resulted from the product defects Moreover Hitachi Solutions Ltd retains the right to revise this user s guide and to modify the contents thereof without any obligation to notify anyone 1 English StarBoard 19 Product Assurance Provisions This product is limited to use in the country where the user bought this product For warranty details refer to Appendix 3 6 at the end of this user s guide This third edition of the user s guide T19 ML110801 is for the following products 70 53K02G00x StarBoard T 19WX AH00219 The term x as used in this manual denotes the model No of the product The StarBoard T 19WX incorporates WALTOP s 19 inch LCD monitor integrated digitizer technology Windows 15 registered trademarks of Microsoft Corporation U S and in other countries Mac and Mac OS are trademarks of Apple Inc registered in the U S and other countries Other trademarks and product names are trademarks and or registered trademarks of their respective holders User s Guide Creation Dates August 2011 Third Edition T19 ML 110801 Rights Reserved Copyright 2010 Hitachi Solutions Ltd 2 English StarBoard 1 1 Safe Handling Safe Handling Markings and Symbols Various markings and symbols are used in this user s guide and on this product to ensure the safe and correct use of this pro
14. d images to a PC screen in real time as well as simultaneously input those to the PC Those features work when the included software is set up on a PC connected to the StarBoard 1 1 2 Features OWrite directly to the PC screen Use the stylus pen just like a mouse to operate the PC on the screen displayed on the LCD monitor The StarBoard Software allows text and images to be written to the PC and allows the text and images to be input to the PC as digital data in real time That data can then be saved printed or otherwise manipulated OCompatible with presentations in PowerPoint Text and images can be written into presentation materials prepared in Microsoft PowerPoint That allows you to further enhance presentation expression Presentations can also be linked to remote meetings OWrite on video images For Windows Write text and images to screens of captured video That allows for easy use of video materials in classes and presentations OEight function buttons Standard functions used frequently in the StarBoard Software are assigned to the eight function buttons located on the top left side of the StarBoard Those buttons act as shortcuts when using the software 1 1 English StarBoard 1 1 Introduction 1 2 Parts Check After unpacking make sure that all of the following parts are included Parts G AAA alkaline dry oel 0o Spare pen tips FO OOO RGB cable USB cable U
15. duct and to prevent personal injury and property damage These symbols and their meanings are as explained below Understand the information well before reading the body of the user s guide This 1s a Safety Warning symbol This symbol will appear to raise the attention of the user to existing risks that may cause harm to people To avoid any chances of injuries or possibly death DO NOT IGNORE the safety instructions that follow this symbol A WARNING This warning will appear where there exists a risk of death or fatal injuries A CAUTION This warning will appear where there exists a risk of moderate or light injuries NOTICE This warning wil appear where there exists a risk of darrage to property N This symbol draws attention to cautions including warnings S This symbol indicates something prohibited o This symbol indicates something that must be done 3 English 5 tarBoard 129WX Safe Handlin Securely insert the power plug into the power socket Do not plug in power plug with a wet hand Electric shock will result If itis not plugged in securely overheating will occur possibly resulting in electric shock or fire Before cleaning this product unplug the power plug e Electric shock sometimes results Do not use this product near water n Electric shock will result Do not damage break process or forcibly bend the power cable The power cable will be damag
16. ed resulting in fire or electric shock Before moving this product detach the power plug and the power cable When plugging in or unplugging the The power cable might be damaged possibly resulting in electric shock or fire power plug hold the plug Periodically clean the power plug to Ifthe power cord is pulled it might be damaged possibly resulting in electric shock or fire remove dust 9 Be careful about the locations of the power cable etc A Use the product at the indicated power supply voltage If a dirty plug is plugged into an outlet fire or electric shock might result The power cable might trip someone possibly causing the product to fall etc thereby causing injury or product failure Be careful with their locations Ifthe product is used at a power supply voltage other than the one indicated it will fail resulting in fire or electric shock English 5 tarBoard 19 Safe Handlin Do not use a power cable other than the accessory power cable Unplug the power plug if you do not plan If a power cable other than the accessory power cable is used fire or electric shock might result on using the product for an extended period of time e Failure to do so could result in a fire Only place specified objects on this product Q liquid metal object enters this product electric shock or fire might result If e
17. efully If too much force is applied when closing the rear part of the stylus pen the pen may be damaged 2 2 5 Replacing the Stylus Pen Tip When the stylus pen tip wears down and becomes too short replace it as described below 1 Using the special pin set remove the stylus pen tip 2 6 English StarBoard 1 1 IWX Usage 2 3 Using the OSD Menu The OSD menu is used when adjusting the StarBoard LCD screen OSD is an abbreviation for On Screen Display The OSD feature allows you to view and adjust the settings for the display on the screen 2 3 1 OSD Buttons and Their Functions eMENU SELECT button e button This button 15 used to display the Brightness can be adjusted by the OSD menu Pressing it after and buttons after pressing the making menu selections applies button This button is also used to select those selections OSD menu options and change setting values eAUTO button This button 1s used to button This button 15 used to toggle automatically adjust the screen muting ON OFF It is also used to display select OSD menu options and change settings BRIGHTNESS INPUT ANALOG LCD ADJUSTMENT RESOLUTION 1280 x 1024 COLOR TEMPERATURE FREQUENCY 60Hz MODE COLOR 9 LANGUAGE VOLUME OTHER SETUP OSD TIMEOUT 2 EXIT OSD Menu ll Adjustment procedure 1 Press the MENU SELECT button to display the OSD menu 2 Use the butto
18. fault values RETURN Used to return to the previous page 8 EXIT Used to exit the OSD menu BRIGHTNESS CONTRAST INPUT ANALOG LCD ADJUSTMENT RESOLUTION 1280 x 1024 COLOR TEMPERATURE FREQUENCY 60Hz ECO MODE COLOR 7200K amp 9 LANGUAGE VOLUME 50 OTHER SETUP OSD TIMEOUT 24 2 10 English StarBoard 19 Appendix 3 Appendix 3 1 Troubleshooting First check adjustments and handling methods and check for poor cable connections Those are often the causes of problems when nothing is actually broken Screen display related problems Check this And do this display on StarBoard manual and other documentation Is the RGB cable connected Connect the RGB cable correctly For to the PC and StarBoard details on how to connect see 1 4 3 properly Connection Procedure on page 1 9 of this User s Guide For laptop PCs is external Connect cable after starting up the PC RGB output selected or switch to external RGB output at the screen display mode settings Method of switching differs by PC For instructions see the PC manual and other documentation Was LCD and monitor Set so LCD and monitor are both switching done right may gt selected or that just the monitor is be assigned to a function selected For details on selection see the PC manual and other documentation technical support StarBoard Software related problems Check this And do this
19. ither should enter unplug the power plug from the outlet and contact your dealer Do not open or alter the cabinet of this product AN The cabinet contains high voltage areas so electric shock or other injury will result Do not leave this product or any of its accessories on the floor A Do not dispose the equipment as unsorted Someone might step on it and break it or might be injured by tripping on it municipal waste but use the return and collection systems available Q Contact your dealer for details Do not place a heavy object on the power cable heat or pull it The power cable will damaged causing fire or electric shock English StarBoard 1 1 Safe Handlin In the following cases unplug the product from the AC Adaptor socket and ask the technical support of Hitachi Solutions After the power cord or AC Adaptor plug is damaged After liquid 15 spilled onto the main unit After the main unit 1 exposed to rain or water After this product malfunctions even when operated according to the instruction manual Adjust this product within the ranges specified in the instruction manual Do not make other adjustments A qualified service representative is required to correct improper adjustments After this product falls or after its cabinet is damaged After the functionality of this product changes and repair by a service representative is considered necessary NOTICE
20. n and button to select a menu item 3 Press the MENU SELECT button to confirm the selection 4 Use the button and button to adjust the value and MENU SELECT to select that value 5 To close the OSD menu leave buttons un pressed for a set amount of time adjustable or select EXIT from the menu screen If closing by not pressing buttons setting changes made up to then will be applied when the OSD closes 2 7 English StarBoard 1 19WX Usage 2 3 2 OSD Adjustment Options ae BRIGHTNESS d CONTRAST INPUT ANALOG LCD ADJUSTMENT RESOLUTION 1280 x 1024 COLOR TEMPERATURE FREQUENCY 60Hz ECO MODE COLOR LANGUAGE VOLUME OTHER SETUP OSD TIMEOUT EXIT 1 BRIGHTNESS Used to adjust screen brightness 0 100 BRIGHTNESS 2 CONTRAST Used to adjust colour contrast The larger the value the brighter the image will be 0 100 3 LCD ADJUSTMENT LCD ADJUSTMENT CLOCK PHASE H POSITION V POSITION CLOCK Used to adjust screen size 0 100 PHASE Used to adjust the sampling timing phase for converting the analogue input signal to a digital input signal 0 63 H POSITION Used to change the horizontal position of the screen 0 100 V POSITION Used to change the vertical position of the screen 0 100 RETURN Used to return to the previous page 2 8 English StarBoard 1 1 IWX Usage 4 COLOUR TEMPRATURE Used to adjust the colour temperature of the screen
21. nected properly the StarBoard is connected message appears If the indication does not change even though you have checked the connection there is likely to be some problem For details see 3 Appendix Troubleshooting page 3 1 in this user s guide 2 2 English Usage 2 2 Using the Stylus Pen This section describes how to use the StarBoard stylus pen 2 2 1 How to Use the Stylus Pen The stylus pen has a power switch Battery life can be prolonged by switching the power switch OFF when not in use To draw characters and figures using the stylus pen set the power switch of the stylus pen to the ON position ON OFF switch 2 2 2 Basic Stylus Pen Operations The stylus pen can be used in the same way as a mouse Under the stylus pen s default settings the pen tip button 1 set to correspond to the left mouse button for Windows to the primary mouse button for Mac When Windows or Mac OS is open the pen tip button may be used to perform the following mouse actions The following xxxx xxxx description 1s for functions and operations in a Windows environment or Mac OS environment e Clicking Primary mouse button clicking Press the pen tip against the display with a suitable amount of force and then release it quickly e Double clicking Primary mouse button double clicking Press the pen tip against the display with a suitable amount of force and then release it two times in a row e Dragging Dragging Press
22. ocated nearby electromagnetic noise so use StarBoard such as StarBoard away from devices that microwave ovens or radio noise transmitters that emit Restart Windows Mac OS and StarBoard Software electromagnetic noise Contact technical support 3 3 English StarBoard 19 Appendix 3 2 System Specifications Specification StarBoard T I9WX Model No 70 53K02G00x StarBoard T 19W X AH00219 Display Driver type Active Matrix Liquid Crystal Display TFT characteristics Effective screen size 19 inches 408 24 mm W x255 15 mm H Resolution 1440x900 WXGA Pixel pitch 0 2835x0 2835 mm 0283550 Digitise characteristics Pen Stylus pen Uses one AAA alkaline dry cell battery life approximately 1800 hours Reading accuracy Tracking speed Approximately 130 points per second USB interface USB1 1 compliant Environmental During use 50 F to 95 F 10 C to 35 C conditions in storage 4 F to 140 F 20 C to 60 C in storage 10 to 8096 no condensation Input output DC in VGA in Dsub 15 pin VGA out Dsub 15 pin Stereo mini jack stereo audio USB 50 W or less 2W or less in power saving mode Power supply AC adapter Input AC 100 240 V 50 60 Hz 1 5 A Output DC 12 V 5 0 The term x as used in this manual denotes the model No of the product Battery life varies depending on the temperature and humidity of the usage environment 3
23. of the battery using cellophane tape or similar material when disposing of batteries Disposing of batteries without insulating them may lead to overheating bursting or ignition due to shorting resulting in personal injury or fire Furthermore be sure to follow all local rules and regulations regarding proper battery disposal If within the EU be sure to follow Batteries Directive Batteries directive 2006 66 EC When changing the battery be careful not to close the pen s rear part too forcefully If too much force is applied when closing the rear part of the stylus pen the pen may be damaged 7 English StarBoard 19 Contents 1 IntroductiOgL ii eoo de EHI Ee o a euro ise ie edoceri P DoD rie Pep ees 1 1 IL Preparations Denote N namaste 1 1 Dl Me PEOCUCE OVEN EW 1 1 A 1 1 LPEE Eana nee eee een RnR RCN ROR scho d ee drafted oe 1 2 1 3 Part Names and MUNG HONS 1 3 IR Oe ene ee eee re eR 1 3 switch 1 4 1 5 1 32 Eunctor voids do qt Sa E uS Ce rop 1 6 dAssembly and Sept di NEAR B daten Lee 1 7 Ld aste te Ed coe ntn OD Soto ttn oan sut un esu Una e icc 1 7 LAZ How Use Pen Tolder Dade tanen oe 1 8 1 24 35 Procedu ess RR ee uu Memes MTM RUE Co ei EM 1 9 2e Usage Pro
24. ology there may be some dots that are always on or always off but this 15 not a malfunction 2 The lifespan of the backlight used in the LCD panel is approximately 50 000 hours The backlight used in the LCD panel has a limited lifespan Contact technical support if the screen becomes dark flickers or will not light up 3 6 English StarBoard 19 Appendix 3 6 Provisions of Product Warranty 1 During the free warranty service period if a malfunction occurs during normal use the malfunction will be corrected without charge according to the provisions of the warranty Furthermore if the customer registration card accompanying the warranty 1 not returned to our company the customer information will not be registered so free repairs might be unavailable After receiving this product please immediately fill out and return this customer registration card 2 The warranty coverage 15 as listed in the following table Product Name Warranty Coverage StarBoard 19 inch LCD monitor Stylus pen RGB cable USB cable Power cable Audio cable EE CNN adapter Replacement tip for Stylus pen Other parts o Legend Covered by warranty excluding wear and physical damage Not covered by warranty 3 Please refer to the warranty about this product s warranty service period 4 Even during the warranty period there will be a repair charge in the following cases 1 Ifthe registration card accompan
25. om the PC 5 Audio input port This port is used to output PC audio from the StarBoard speakers The supplied audio cable is connected to this port English StarBoard 1 1 Introduction 1 3 4 Function Buttons OOOOOOOO 1 ToolBar hide un hide 5 Topic list Hides displays StarBoard Software Hides displays the Topic List ToolBar 6 Solid pen 2 New blank page Switches to solid pen Adds a new blank page 7 Fluorescent marker pen 3 Previous page Switches to fluorescent marker pen Displays the page before the currently displayed page 8 PC screen Launches PC Operation mode in 4 Next page which operations on the PC screen Displays the page after the currently are done via the pen instead of the displayed page mouse You can customize the shortcuts with the software for Windows You cannot customize the shortcuts with the software for Mac OS For details on using the function buttons see the StarBoardSoftware Function Button Settings Help 1 6 English StarBoard 1 1 Introduction 1 4 Assembly and Setup Keep the following points in mind when installing the StarBoard Select a stable flat location Avoid installing in locations that are dusty extremely hot cold or humid Also avoid installing in locations exposed to direct sunlight 1 4 1 Adjusting the Stand Hold the body firmly and slide the stand slowly when adjusting it When adjusting the stand if you pull up the lever
26. re Installation Guide Connect the RGB cable to the VGA input port on the side of the StarBoard and tighten the screws to fasten Connect the other end of the cable to the PC VGA port and tighten the screws to fasten Connect the USB cable to the USB port on the side of the StarBoard Connect the other end of the cable to a USB port on the PC Connect the audio cable to the audio input port on the side of the StarBoard Connect the other end of the cable to the audio output port on the PC Do this only if you plan to use the StarBoard s built in speakers Connect the AC adapter connector to the StarBoard power connector Connect the power cable to the AC adapter then plug the power plug into power socket If outputting the StarBoard screen to external equipment connect the RGB cable to the VGA output port Connect the other end of the cable to an input port on the external video equipment 1 10 English StarBoard 1 1 IWX Usage 2 Usage Procedures This section describes the basic procedures for using StarBoard For information on using advanced StarBoard features see the StarBoard Software Installation Guide or StarBoard Software Online Help 2 1 Start Method 2 1 1 Start Method Windows version This section describes how to turn the StarBoard on for Windows user This section describes how to turn the StarBoard on 1 Turn on the StarBoard power j n Push the power button
27. uct is susceptible to devices located nearby electromagnetic noise so use the StarBoard such as StarBoard away from devices that microwave ovens or radio emit noise transmitters that emit Restart Windows Mac OS and StarBoard Software electromagnetic noise Contact technical support Stylus pen tip and pen Did you calibrate the pen Calibrate the pen position correctly cursor positions do not position correctly For details on how to calibrate the match pen see Calibration in the StarBoard Software Installation Guide Other Contact technical support 3 2 English StarBoard 19 Appendix Function button related problems Check this And do this Function buttons don t Is the USB cable connected Connect USB cable to PC For details operate on how to connect see 1 4 3 Connection Procedure on page 1 9 of this User s Guide Is the StarBoard Software Function button features require the running StarBoard Software Use them with the StarBoard Software running For details on how to use the StarBoard Software see the StarBoard Software Installation Guide StarBoard Software may be Uninstall StarBoard Software and damaged or may not be then reinstall For details on how to installed correctly install StarBoard software see StarBoard Software Installation in StarBoard Software Installation Guide Are there any electronic This product is susceptible to devices l
28. uction 1 3 2 Front Switch Panel 1 Power button 4 MENU SELECT button This button turns the StarBoard LCD This button 15 used to display monitor ON OFF OSD menu Press it after making menu selections to apply those 2 Power indicator This indicator turns green when 5 T button power is supplied normally to the This button 15 used to toggle muting StarBoard and an image signal is ON OFF It is also used to select detected It turns red when no image OSD menu options and change signal is output from the PC or when settings power saving mode is on 6 button 3 AUTO button Brightness can be adjusted by the This button is used to automatically and buttons after pressing the adjust the screen display button This button 15 also used to select OSD menu options and change setting values BI For details on using the OSD menu see 2 3 Using the OSD Menu on page 2 6 of this User s Guide 1 4 English StarBoard 19WX 1 3 3 Connector Panel 8 1 2 3 Introduction 9 722 O 9 222 O 0 m m 9 4 5 StarBoard Bottom View 1 USB port A USB cable is connected here 2 Power port The AC adapter is connected here 3 VGA output port This port is used to connect external devices such as a projector via RGB cable to output video displayed on the StarBoard 1 5 4 VGA input port This port is used to connect a PC via RGB cable to display images fr
29. without holding onto the body the body may move suddenly resulting in unexpected injuries or damage to the body Follow the procedure shown below to adjust the stand 1 Pull up the stand lever amp nk Lever 1 7 English StarBoard T 19WX Introduction 2 Slide the stand to the desired angle and release the lever Use the screen at an easily viewable angle taking into account external light and ceiling lighting which may reflect off the screen 3 Check that the lever and stand are secure 1 4 2 How to Use the Pen Holder The T 19WX comes with a pen holder on the back side Store the stylus pen in the pen holder when not in use lt Insert horizontally 1 E Br i N L 1 E n c S i fij 1 CY 1 1 1 3 E B NH Ed NB H E NH HR E H W B NM E H H E B G H W d NH NH dd E NW db NH SH NM b e o T OB CT do Cb b S do Bo d o B To B T bo BU Y B Hd Bo B HoT B Y Bo M oBB BOR B Bob HS Bod Ho B oH d Bob Bod B B dod B od B Ho B B d n Ho Hg E N B E NH BH E NH B D E H H H B E M mH RR Boh B Bob Bog 4d B o5 5 d E BH E E BH GE NH d E H 4d H hu b hu oh oho hod E od 1 R N E B Ho HB OH ORB A B H d B M T B T TP NH T R E m m H T B Mo T B H M o ES HS d d B odo E d BH od B Ho B oH d Bod b t 4 B bBo b Ho d Boc B ok oS
30. ying the warranty is not returned to our company 2 Ifthe warranty is not presented 3 Ifspecified fields on the registration card accompanying the warranty are not completed or if the wording has been changed without authorization 4 The warranty applies only to the original purchasers It does not apply to a third party to whom the customer resold this product 5 Inthe event of a malfunction or damage resulting from the customer s improper handling e g a fall impact etc caused by the customer during transportation or movement 6 Inthe event of problems resulting from handling contrary to the handling and precautions mentioned in this user s guide 7 Inthe event of failure or damage resulting from abnormal voltages pollution or other natural disasters e g fire earthquake lightning 3 7 English StarBoard 19 Appendix 8 Inthe event of a malfunction in this product caused by the connection to this product of equipment other than the equipment specified by our company 9 Inthe event that there is no abnormality in this product but a defect in a part other than this product was detected or remedied 10 In the event of ordinary wear and tear wear deterioration etc of consumables even during normal use 5 If this product malfunctions review the contents of this user s guide If the problems remain irreparable contact technical support Technical support will determine whether or not
Download Pdf Manuals
Related Search