Home

product manuals

image

Contents

1. 2 0 9 means track 209 Note e Supporting format MP3 32kbps 320kbps The total number of MP3 files on the Memory Device should not exceed 999 e f you can not easily insert the memory card you may have inserted it incorrectly Try to turn over the card and then insert again For playing files on USB flash drive or SD card you should plug in the USB flash drive or SD card when the unit is in standby mode There are many USB devices in the market We cannot guarantee to support all different models Please try another USB device if your device is not supported e Some SD cards may be incompatible BLUETOOTH PAIRING amp LINKING OPERATION 1 Turn off the Bluetooth functionality of other devices that were paired with your unit 2 Press button to turn on the unit 3 Press SOURCE button to select Bluetooth mode The Bluetooth indicator will turn Deep Blue 4 Turn on Bluetooth functionality on your Bluetooth device Typically Bluetooth controls are found on the device s tools or settings menu see your user manual Turn on Bluetooth connectivity and make your device discoverable 5 Clean out the paring list on your Bluetooth device 6 Choose add a new Bluetooth device or setup Bluetooth device on your device It will start to search Once TS9114 shows on your device select it If your device prompts you for a pass code please enter 0000 If the pairing attempt fails or times out please
2. 5 Do not use this apparatus near water 6 Clean only with a dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with AA S the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any Way such as power supply cord or plug is damaged liquid has b
3. for the remote control 1 Push and slide out the battery door 2 Replace the battery with a new CR2025 button cell with the polarity facing up 3 Slide the cover back D K m ji ma p pm Es uU C D RM Lc t he a i 1 9 3 Notes on batteries Never recharge the batteries apply heat to them or take them apart Battery shall not be exposed to excessive heat such as sunshine fire or the like Do not throw the batteries in fire Attention should be drawn to the environmental aspects of battery disposal e If the remote control is not going to be used for a long time remove the battery to avoid damage caused by battery leakage corrosion Please respect the environment Before throwing any batteries away consult your distributor who may be able to take them back for specific recycling CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type POWER SOURCE Inert the AC plug into a conveniently located AC outlet having AC 240V 50Hz WARNING This unit has a long AC cord that can easily be tripped on or pulled on causing injury Please make sure it is arranged so it will not drape over a tabletop etc where it can be pulled on by children or tripped over accidentally GENERAL OPERATION 1 Press amp button to turn on or turn off the unit 2 Press the SOURCE button repeatedly to select the playback source as desired The indicator wil
4. start pairing procedure again see steps 2 6 7 After your device and the TS9114 have connected each other a Beep sound can be heard Note The unit will automatically reconnect the last used device if the device is in Bluetooth mode and back to the effective distance again Play MUSIC from Bluetooth devices Make sure the Bluetooth connection between the unit and the device is active 1 Press PI to suspend momentarily the playing track Press Iagain to resume playing 2 Press gt gt I button to skip forward to next track and I to skip backward to previous track Note MI and 1 1 buttons may not work with some of the players in your BLuetooth source TROUBLESHOOTING GUIDE Check the followings before requesting service SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION No power AC plug not connected to the Plug to the wall outlet wall outlet Raise volume level by pressing the VOL Volume in minimum position Volume button Play the music movie in the connected device as usual and make sure the volume level of it is in high level No sound The connected device is not in payback mode Press the SOURCE button repeatedly to Input source incorrect i i p set the input source to the desired mode Th it i h Set to AUX IN 1 mode indicator turns EN 1 mode a Indigo and AUX IN 2 mode AUX IN 2 source indicator turns Light Blue The AUX IN source is locked Wake up the AUX IN source up The b
5. that you have removed all the accessories and information papers Speaker tower User manual Remote Control 1 piece of Stereo audio connection cable with 3 5 stereo plug 2 pieces of Assembly screws washers INSTALLATION 1 Main Body 5 Speaker Net 2 Wooden Base 6 Remote Sensor 3 Washers 7 Tweeters 4 Screws 8 Loud Speakers 9 Woofer Fig 1 Fig 2 Notes 1 Assemble the wooden base to the main body with the supplied screws and washers as Fig 1 above 2 The speaker net can be taken out and reassembled as Fig 2 above LOCATION AND DESCRIPTION OF CONTROLS MAIN UNIT 1 ANT Antenna for FM Radio 9 4 TUNE Button 2 Cloth Bag 10 VOL Button 3 AUX IN 1 input Jack RCA 11 TUNE Button 4 STOP Button 12 INDICATOR 5 POWER Button 13 AUX IN 2 Jack 6 SOURCE Button 14 USB Port 7 MI x Button 15 SD SDHC MMC Card Slot 8 VOL Button 15 LOCATION AND DESCRIPTION OF CONTROLS REMOTE CONTROL 1 STANDBY Button 2 TUNE Button 2 7 3 VOL Volume Buttons 3 4 SOURCE Button 5 K MUTE Button 6 pp TUNE Button 7 gt ll Play Pause Button 8 STOP Button 9 FM SCAN Button 10 EQ Button 11 Numeric Buttons The remote control operates on 1pc CR2025 lithium battery included To power up the remote control remove the insulation tab from the back of unit Replacing battery
6. LENODX BLUETOOTH TOWER STEREO SYSTEM With USB SD and PLL FM Radio USER MANUAL Model TS9114 PLEASE READ BEFORE OPERATING THIS EQUIPMENT WARNINGS AND PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A The lightning flash with A arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons A equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance DANGER Invisible and hazardous laser radiation when open and interlock failed or defeated Avoid direct exposure to beam This symbol indicates that this in product incorporates double insulation between hazardous mains voltage and user accessible parts The exclamation point within an CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture CAUTION Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure WARNING Changes or modifications to this unit not expressly approved by the party respons
7. atterry is consumed Replace with new battery working The unit is paired with another Turn off the functionality of other devices Bluetooth Bluetooth device that are paired with the unit reception failure Clear out the paring list on your Bluetooth device and reconnect The unit is set to wrong mode Set the unit to Bluetooth mode No sound from Bluetooth source Audio cable is connected Disconect the audio cable SPECIFICATIONS Power source AC 240V 50Hz Power Consumption 40W RMS Radio Coverage FM 87 5 108 0 MHz Bluetooth working distance Up to 10 meters measured in open space Wall and structures may affect range of device Remote working distance Up to 5 meters LENODX Lenoxx Electronics Aust Pty Ltd Importers and Wholesalers of Electronics amp Toys 6 Oban court Laverton North Victoria 3026 ABN 97 844 321 851 PH 03 9267 2100 FAX 03 9267 2199 For service call 1300 666 848 Email lenoxx lenoxx com au www lenoxx com au
8. een spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Additional Warnings The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus Main plug is used as disconnect device and it should remain readily operable during intended use In order to disconnect the apparatus from the main completely the main plug should be disconnected from the main socket outlet completely Battery shall not be exposed to excessive heat such as sunshine fire or the like Caution marking is located at the rear or bottom of the apparatus e The marking information is located at the rear or bottom of apparatus FCC Warnings This device complies with part 15 Of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules PACKAGE CONTENTS When you unpack your new unit make sure
9. ible for compliance could void the user s authority to operate the equipment WARNING Do not place the unit on top of any soft porous or sensitive surfaces to avoid damaging the surface Use a protective barrier between the unit and surface to protect the surface WARNING Use of this unit near fluorescent lighting may cause interference regarding use of the remote If the unit is displaying erratic behavior move away from any fluorescent lighting as it may be the cause CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type WARNING There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit Only use rechargeable NiMH batteries WARNING Lithium batteries like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste Contact your local government for disposal or recycling practices in your area They should never be incinerated since they might explode WARNING Shock hazard Do Not Open Main plug is used as disconnect device and it should remain readily operable during intended use In order to disconnect the apparatus from the main completely the main plug should be disconnected form the main socket outlet completely IMPORTANT SAFETY INSTRUCTION 1 Read these Instructions 2 Keep these Instructions 3 Heed all warnings 4 Follow all instructions
10. l turn Green RADIO Indigo AUX IN 1 Light Blue AUX IN 2 Deep Blue Bluetooth Violet SD SDHC MMC card Yellow USB Note If no USB device or CARD was inserted USB or CARD mode cannot be selected by SOURCE button 3 Press the VOL Volume Buttons to adjust volume level 4 Press the EQ button to set EQ equalizers mode as desired 5 Press the K Button on the remote control to turn off the sound Press it again to turn it back 6 If the unit is not used for a long period of time pull out the plug to turn off the unit completely PLAY RADIO Press the D button to turn on the unit 1 Press SOURCE button repeatedly until the Indicator color turns GREEN 2 Press the FM SCAN button or press and hold C button and then the unit will start to search all available stations then stored into the memory automatically 3 After finished FM SCAN press numeric buttons then wait for approx 3 seconds you can select 1 20 preset stations eg pressing 1 means preset station 1 pressing 2 0 means preset station 20 Or press CY to cycle through and listen to the preset stations Note eYou can also manually search for a station by pressing and hold gt gt I or K4 button to search for the available stations The unit will stop when a station is found Shortly the playback will begin All the received stations by using or M can not be stored into the memory To enhance radio reception ability FM Fully un
11. wind the antenna wire Extend the antenna wire and place it in the position that sounds best LISTENING TO AUXILIARY SOURCE 1 Connect your auxiliary source e g TV DVD VCR player to the AUX IN 1 jack RCA Or connect your auxiliary source e g iPod iPad MP3 player to the AUX IN 2 jack 3 5mm 2 Press button to turn on the unit Press the SOURCE Button repeatedly until the color of Indicator turns to Indigo AUX IN 1 and Light Blue AUX IN 2 3 Start playback from your auxiliary source 4 Adjust the volume to desired level 5 To stop playback disconnect your auxiliary source from the AUX jack USB OR SD CARD PLAYBACK You can connect a USB flash drive not included to the USB port or a SD SDHC MMC not included to the memory expansion card slot on the unit to play MP3 files 1 Press D button to turn on the unit Insert the USB or SD SDHC NMMC card the indicator turns Yellow USB and Violet SD SDHC MMC card Wait for a few seconds the unit will play the music files automatically Note e USB and SD SDHC MMC card sources will be automatically selected when inserted in 2 Press pil to suspend momentarily the playing track Press I again to resume playing 3 Press button to skip forward to next track and M to skip backward to previous track Press and hold or kK to search quickly within a track 4 Using numeric buttons to your desired track eg pressing 1 means track 1 pressing

Download Pdf Manuals

image

Related Search

Related Contents

Philips SHM1000  Benutzerhandbuch  USER MANUAL - Loligo Systems  M. Christophe Martin, DREAL  UX60 Troubleshooting Diagram  DELL UltraSharp 672-10004  Approx APPNB06    Bedienungsanleitung Car Cam one Deutsch / Englisch - a    

Copyright © All rights reserved.
Failed to retrieve file