Home

User Manual

1. NOTE e A change to the language setting will only be applied to the onscreen menu display e It will not be applied to other functions on your PC Configuring Language 1 Press on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the EE button 3 Move to Language using the A v buttons Next press the Z534 button The following screen will appear TE Enter 4 Press a v to move to the option you want and press m 5 The selected option will be applied 65 Setup and Reset Set PC AV Mode to AV The size of the image displayed on the screen will be enlarged This option is useful when viewing a movie NOTE PC AV Mode is available in HDMI mode only Configuring PC AV Mode 1 Press on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the T button 3 Move to PC AV Mode using the xv buttons Next press the T button The following screen will appear Adjust Te Enter 4 Press Ajv to move to the option you want and press 5 The selected option will be applied Enable disable Auto Source mode that detects the input source automatically Configuring Auto Source 1 Press II on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the iT button 3 Move to Auto Source using the a v buttons Next press the T button The following screen will appear e Auto Automatica
2. Monitor and adjust Refresh rate under Monitor settings Windows ME 2000 Go to Control Panel Display Settings gt Advanced Monitor and adjust Refresh rate under Monitor settings Windows Vista Go to Control Panel Appearance and Personalization Personalization Display Settings Advanced Settings Monitor and adjust Refresh rate under Monitor settings Windows 7 Go to Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings Windows XP Go to Control Panel Appearance and Themes Display Settings and adjust the resolution Windows ME 2000 Go to Control Panel Display gt Settings and adjust the resolution Windows Vista Go to Control Panel Appearance and Personalization Personalize Display Settings and adjust the resolution Windows 7 Go to Control Panel Appearance and Personalization Display Adjust Resolution and adjust the resolution 75 Troubleshooting Guide man sur How do I set power e Windows XP Set power saving mode in Control Panel saving mode Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC e Windows ME 2000 Set power saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC e Windows Vista Set power saving mode in Control Panel gt Appearance and P
3. CY WDCA7UT Authorization number SEC CRM SEC CY WDCA7UT Authorized to Samsung Electronics Co Ltd Manufactured by Samsung Electronics Co Ltd PowerSave The power saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time The power is not turned off in power saving mode To switch the screen back on press any key on the keyboard or move the mouse Power saving mode functions only when the product is connected to a PC that has a power saving function Power lamp On Blinking off C24B550U 38 0 W less than 0 8 W less than 0 3 W POWER 24B750X OW less th 8 W less th 3 W CONSUMPTI ON C 50 38 0 ess than 0 8 ess than 0 C27B750X 40 0 W less than 0 7 W less than 0 3 W The power consumption level can vary in different operating conditions or when settings are changed To reduce the power consumption to 0 watts turn off the power switch on the back of the product or disconnect the power cable Be sure to disconnect the power cable when you will not be using the product for an extended period of time To reduce the power consumption to 0 watts when the power switch is not available disconnect the power cable 78 Specifications H Horizontal Frequency Preset Timing Modes The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle The reciprocal
4. HUB HUB refers to a device that is a common connection point for multiple devices connected over a network It is used to connect multiple PCs video devices office devices and or LANs over a single network Wireless connection dongle for Series 7 Dongle refers to a device that connects to an input output port on a PC It contains a security key or ID so that only the user that connects the wireless dongle to their PC can access a certain application The wireless connection dongle itself contains data required for a wireless connection to work It must be connected to your PC when a wireless connection is needed The Gamma menu adjusts the grey scale that represents middle tones on the screen Adjusting the brightness brightens the whole screen but adjusting Gamma only brightens the medium brightness Grey scale Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen Changes to the screen brightness are expressed with black and white variation and grey scale refers to the medium area between black and white Changing the grey scale through Gamma adjustment will change the medium brightness on the screen Scanning rate or refresh rate refers to the frequency of screen refreshes Screen data is transmitted as it refreshes to display an image although the refreshing is invisible to the naked eye The number of screen refreshes is called scanning rat
5. If Wireless Connection does not work properly update the driver to the latest version from www samsung com USB screen 0 Symptom The screen is blank although the power is turned on and the cables are connected 1 Press the T button on the product to check the input source 2 Check the cable connection Press the button to check that the input source is set to USB If the input source is not set to USB press the button to configure the input source Check that the USB cable is properly connected to the product and PC Mobile Control and MHL Should the PC be turned on in order to use Mobile Control Is the PC required to be turned on to use the MHL function The Mobile Control feature allows sharing of a keyboard mouse and files between a PC and mobile device Use of Mobile Control is not possible if your PC is turned off The MHL function works regardless of the connection to a PC The PC does not need to be turned on 74 Troubleshooting Guide What are the different kinds of mobile devices that are compatible with Mobile Control Can I use a standard USB cable instead of the one provided in the package when using Mobile Control Can I use MHL and Mobile Control at the same time Most of the devices that provide the host function are compatible with Mobile Control Compatible devices include PCs that support the Windows operating system and Samsung Galaxy S2 series and late
6. Min http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com 81 Appendix GREECE HUNGARY ITALIA LATVIA LITHUANIA LUXEMBURG MACEDONIA MONTENEGRO NETHERLANDS NORWAY POLAND PORTUGAL ROMANIA SERBIA SLOVAKIA SPAIN SWEDEN 80111 SAMSUNG 80111 726 7864 only from land line 30 210 6897691 from mobile and land line 06 80 SAMSUNG 726 7864 800 SAMSUNG 726 7864 8000 7267 8 800 77777 261 03 710 023 207 777 020 405 888 0900 SAMSUNG 0900 7267864 0 10 Min 815 56480 0 801 1SAMSUNG 172 678 48 22 607 93 33 808 20 SAMSUNG 808 20 7267 08008 SAMSUNG 08008 726 7864 TOLL FREE No 0700 SAMSUNG 0700 726 7864 0800 SAMSUNG 0800 726 786 902 1 SAMSUNG 902 172 678 0771 726 7864 SAMSUNG http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com SWITZERLAND U K 0848 SAMSUNG 7267864 CHF 0 08 min 0330 SAMSUNG 7267864 http www samsung com ch German http
7. e You can adjust the product tilt e To avoid damage to the product when adjusting the tilt push or pull the top area of the product at the center while holding the top of the stand 18 Chapter 3 Using Smart Station What is Smart Station USB Display USB Hub Using older monitors can be inconvenient when using the USB Hub function because you need to connect a USB cable in addition to a display output cable D sub DVI etc Smart Station refers to an advanced concept monitor that offers enhanced usability by providing useful new functions such as Wireless Connection USB Hub and Mobile Control The USB Display feature of the Smart Station monitor enables the USB Hub and display output to function at the same time using a single USB cable e The USB Hub provides three USB ports and one mobile port The system is optimized especially for notebook PC users NOTE e Unlike notebook PCs and older monitors that have a limited number of ports being Automatic driver install is required to use Smart Station unable to connect to multiple source devices the Smart Station monitor allows you to use Refer to Software Installation for Using Smart Station page 21 for details multiple source devices at the same time using the HUB feature e If a wireless connection is established you can use the wireless USB Hub function without Wireless Connection the need to connect a USB cable Smart Station provides a clean cable free w
8. Do not leave heavy objects or items that children like toys sweets etc on top of the product The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury If there is a thunderstorm or lightning strike turn off the power and disconnect the power cable A fire or electric shock may result Do not drop objects on the product or apply impact A fire or electric shock may result Do not pull on the product holding only the power cable or any other cable Product failure an electric shock or fire may result from a damaged cable If a gas leakage is found do not touch the product or power cable Also ventilate the area immediately Sparks can cause an explosion or fire Do not lift or move the product by pulling the power cable or any cable Product failure an electric shock or fire may result from a damaged cable Do not use or keep combustible spray or an inflammable substance near the product An explosion or fire may result Ensure the vents are not blocked by tablecloths or curtains An increased internal temperature may cause a fire Do not insert metallic objects chopsticks coins hairpins etc or objects that burn easily paper matches etc into the product via the vent or input output ports etc Be sure to power off the product and disconnect the power cable when water or other foreign substances have ente
9. Do not use detergents that contain alcohol solvent or surface active agents Do not spray water or detergent directly on the product 4 To clean the exterior of the product use a moist soft cloth and wring thoroughly before wiping the exterior 5 After cleaning the product connect the power cable to the product 6 Power on the product to use it Electricity and Safety The following images are for reference only Real life situations may differ from what is shown in the images Warning Do not use a damaged power cable or plug or a loose power socket An electric shock or fire may result Do not use multiple products with a single power socket Otherwise the socket may cause a fire Do not touch the power cable with wet hands Otherwise an electric shock may result Insert the power cable all the way in so it is not loose An unsecure connection may cause a fire Be sure to plug the power cable into a grounded power socket type 1 insulated devices only An electric shock or injury may result Before Using the Product BC le Do not bend or pull the power cable with force Also do not place a heavy object on the power cable Damage to the cord may result in a fire or electric shock Do not place the power cable or product near heat sources A fire or electric shock may result Clean any d
10. If you connect the LAN cable to both networks a system crash may occur 1 Set the LAN network on your PC to Disable using the Network Settings menu NOTE To disable the LAN network on your PC go to Control Panel gt Network and Internet gt Network and Sharing Center Change adapter settings Select the network device of your notebook PC Right click on your mouse Select Disable 33 Using Smart Station Organize Disable this network device Diagnase this connection Rename this connection Change settings of this connection Name Status Device Name B Local Area Connection Intel R 82567LF 3 Gigabit Network Connection IE F gt Control Panel p Network and internet Network Connections gt f Seon j KR Disable Local Area Connection 5 Status Diagnose Bridge Connections Create Shortcut Delete Rename Properties 2 Right click on the network device of the Smart Station monitor displayed as LAN9512 LAN9514 USB 2 0 to Ethernet 10 100 Adapter and select Enable NOTE This process must be done before IP configuration 3 Enter the static IP address assigned to the network device of the Smart Station monitor NOTE To enter the static IP address go to Control Panel Network and Internet Network and Sharing Center Change adapter settings Select the network device of the Smart Station monitor displayed as LAN9512 LAN9514 USB 2 0 to Ethern
11. 1 Insert the user manual CD provided with the product into the CD ROM drive 2 Click Windows Driver 3 Follow the instructions given on the screen to proceed with installation 4 Select your product model from the list of models ti SAMSUNG monitor installer Select the display adapter on which you want to intall the monitor Select the monitor which you want to install 5 Go to Display Properties and check that the resolution and refresh rate are appropriate Refer to your Windows OS manual for further details PC System Requirements for Using the Product The Mobile Control product is designed mainly for notebook PC users It is recommended to use a PC that satisfies the following system requirements CPU Core Core2Duo CPU Speed 2 2 GHZ OS XP WIN7 Graphics driver Intel AMD NVIDIA 32 bit or 64 bit Both RAM 2GB e The operating system on your PC can affect the PC s performance for video or game playback e It is recommended to use Windows 7 with the Mobile Control product 4 Connecting and Using a Source Device Setting Optimum Resolution Changing the Resolution Using a PC An information message about setting optimum resolution will appear if you power on the NOTE product for the first time after purchase f I j e Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality Select a language on the product and change the resolution on your PC to the
12. DEVICE 45 Checklist before Connecting to Source Devices 45 Pre connection Checkpoints 45 Connecting the Power 46 Connecting and Using a PC 46 Connecting to a PC 47 Driver Installation 48 Setting Optimum Resolution 48 Changing the Resolution Using a PC 50 Connecting to a Video Device 50 Connecting to an Audio Output Device Chapter 6 SCREEN SETUP 51 MAGIC 51 SAMSUNG MAGIC Bright 52 SAMSUNG MAGIC Color 53 Brightness 53 Configuring Brightness 53 Contrast 53 Configuring Contrast 54 Sharpness 54 Configuring Sharpness 54 Response Time 54 Configuring Response Time 55 HDMI Black Level 55 Configuring HDMI Black Level Chapter 7 CONFI GURI NG THE TINT SETTI NGS 56 Red 56 Configuring Red 57 Green 57 Configuring Green 57 Blue 57 Configuring Blue 58 Color Tone 58 Configuring Color Tone 58 Gamma 58 Configuring Gamma Chapter 8 RESI ZI NG OR RELOCATING THE SCREEN 59 Image Size 59 Configuring Image Size 60 H Position 60 Configuring H Position 60 V Position 60 Configuring V Position 61 Menu H Position 61 Configuring Menu H Position 61 Menu V Position 61 Configuring Menu V Position Chapter 9 SETUP AND RESET 62 HUB 62 Auto Wireless Detection for Series 7 only 63 USB Super Charging 63 Select Source 64 Wireless ID for Series 7 only 64 Eco Saving 64 Configuring Eco Saving 65 Menu Transparency 65 Configuring Menu Transparency 65 Language 65 Configuring Language
13. EOE product Connection e Wireless communication performance is optimal within a range of 1 5m from the product Ensure the product and PC are placed at the same level on the same table etc Otherwise the 4 Check if a wireless connection is established sensitivity of the signal transmission reception can be degraded Using the product on a steel table can degrade performance Do not place any object that can obstruct the signal transmission in front of the product Such objects may decrease signal reception e The product cannot connect to multiple PCs wirelessly at the same time 26 Using Smart Station Using Wireless Connection Wireless Connection Manager Wireless Connection Manager is for Series 7 only The Wireless Connection Manager program allows you to connect your PC to the Smart Station monitor wirelessly To use a Wireless Connection you must install the Wireless Connection Manager program Have the program install automatically by connecting the provided USB cable during the initial setup refer to page 21 You can use the USB Hub feature as well as display the PC screen over a wireless connection without the need of a cable 1 Connect your PC to the product using the USB cable provided in the package Wireless Connection Manager will automatically install 2 After the program is installed remove the USB cable Next connect the provided wireless connection dongle to a USB port on the PC 3 P
14. Move to PICTURE using the 44v buttons Next press the f button 3 Move to MAGIC using the a v buttons Next press the T button 4 Move to Mag ccolor using the a v buttons Next press the iT button The following screen will appear Adjust E Enter e Off Disable the Mac cColor function e Demo Compare normal screen mode with Mag cColor mode e Full Obtain a vivid picture quality for all areas including skin tones in the picture e Intelligent Improve the chroma for all areas except skin tones in the picture 5 Press a v to move to the option you want and press iE 6 The selected option will be applied 52 Screen Setup You can adjust the general brightness of the picture Range 0100 A higher value will make the picture appear brighter SAMSUNG Not available if MagicBright is in Dynamic Contrast mode Configuring Brightness 1 Press on the product 2 Move to PICTURE using the a v buttons Next press the button 3 Move to Brightness using the av buttons Next press the F2 button The following screen will appear lt gt Adjust FY Enter 4 Adjust the Brightness setting using the lt gt buttons Adjust the contrast between the objects and background Range 0 100 A higher value will increase the contrast to make the object appear clearer SAMSUNG e Not available if ja GicBright is in Cinema or Dynamic Contrast mode e Not availabl
15. USB memory keyboard or mouse to the product through the wireless connection dongle for series 7 or a USB cable pages 28 and 31 Mobile Control This feature allows you to control a mobile device connected to the product using a keyboard and a mouse connected to a PC You can control desktop and notebook PCs using a single keyboard and mouse You can also transfer files between desktop and notebook PCs page 20 MHL The feature MHL also known as the Mobile High Definition Link displays the screen of a mobile device on the product through the mobile cable This function is available even if the PC is turned off page 42 Front Buttons The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality This is a touch type button Tap the button lightly with a finger This product contains a power circuit unit causing the stand to generate heat The heat does not mean the product is defective A Speaker for Series 7 only 15 Preparation m Hub DESCRIPTION Open or close the onscreen display OSD menu or return to the parent menu A v Open the HUB settings screen Conveniently establish a wireless connection Wireless Connection and change the input source Select Source using the HUB menu lt gt NOTE To hide the HUB window press the Hu or button Turn the power on or off The po
16. connected to a PC There is no need to directly connect the LAN cable to the PC ss PC IN NOTE You can remove the LAN cable using a flat head screwdriver or ruler Refer to the LAN disconnection page 29 section for further details Monitor IP Setup 1 Install the integrated software for the Smart Station monitor 2 Go to Control Panel Network and Internet Network and Sharing Center gt Change adapter settings 3 You can see that the following two devices are displayed a The user PC s network device b The Smart Station monitor s network device USB to Ethernet adapter The two devices above refer to your PC s LAN network device and your Smart Station monitor s network device NOTE To access the Internet using the LAN network of the Smart Station monitor you must configure the network as follows according to the type of IP you will be using Dynamic IP Dynamic IP address mode automatically configures the network settings on the PC using data sent by a server that allocates an IP address This is possible as a result of the Dynamic Host Configuration Protocol DHCP service The service consists of three steps an IP address allocation request is sent to the DHCP server when the PC boots up the DHCP server that receives the request transmits network information such as the IP address to the PC and the transmitted network information is automatically configured for th
17. hk_en English http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com BAHRAIN EGYPT IRAN JORDAN KUWAIT MOROCCO OMAN SAUDI ARABIA TURKEY U A E 8000 4726 08000 726786 021 8255 800 22273 065777444 183 2255 080 100 2255 800 SAMSUNG 726 7864 9200 21230 444 77 11 800 SAMSUNG 726 7864 http www samsung com ae English http www samsung com ae_ar Arabic http www samsung com http www samsung com http www samsung com http www samsung com ae English http www samsung com ae_ar Arabic http www samsung com http www samsung com ae English http www samsung com ae_ar Arabic http www samsung com ae English http www samsung com ae_ar Arabic http www samsung com http www samsung com 83 Appendix ANGOLA BOTSWANA CAMEROON COTE D IVOIRE GHANA KENYA NAMIBIA NIGERIA SENEGAL SOUTH AFRICA TANZANIA UGANDA ZAMBIA 91 726 7864 0800 726 000 7095 0077 8000 0077 0800 10077 0302 200077 0800 724 000 8197267864 0800 726 7864 800 00 0077 0860 SAMSUNG 726 7864 0685 88 99 00 0800 300 300 211350370 http www samsung com http www samsung com http www samsung com http www samsung com http w
18. optimum e The picture quality of TFT LCDs may degrade if the optimum resolution is not selected setting Changing the Resolution on Windows XP Go to Control Panel Display Settings and change the resolution The optimal resolution for this monitor is as follows Use the above settings to set the resolution on your PC English v lt Adjust IF Enter 1 Press Ajv to move to the language you want and press T 2 To hide the information message press I NOTE foun Sara Aygmnane Sao e If the optimal resolution is not selected the message will appear up to three times for a specified ox o math Pa hal miangna of yas paran time even after the product is turned off and on again e The resolution can also be changed to the optimal setting 1920 x 1080 using Control Panel on your PC Fe ee es 73 coed Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution Bg em Q Brio Diet ig Overs and Printers sweet tees cote 49 Connecting and Using a Source Device Connecting to a Video Device The product can be connected to a video device Connecting parts may differ in different products Connection Using an HDMI Cable
19. or mouse input focus is on the mobile device the PC cannot be controlled using the same input device keyboard or mouse e To move the keyboard and mouse input focus back to the PC press the center button on the mouse or press the shortcut keys Alt S on the keyboard NOTE The shortcut keys can be customized For details on changing the shortcut keys refer to Changing the Settings page 40 38 Using Smart Station Connecting to two PCs NOTE Wired connection Wireless connection for Series 7 only e Charging Control Mode is not supported and battery charging is not possible e Before connecting to your mobile device check that the Mobile Control icon is found on the far right side of the taskbar 1 Connect the primary PC to the Smart Station monitor using the provided USB cable or wireless connection dongle N Connect the secondary PC to the Smart Station monitor using the mobile cable and USB Connection Kit Micro USB to Normal USB A desktop PC cannot be used as a secondary PC 3 After the connection is established Fast Control Mode will be set as default When the USB Connection Kit Micro USB to Normal USB is connected Fast Control Mode is the default mode Charging Control Mode will not be available 4 To move the keyboard and mouse pointer focus from the primary PC to the secondary PC move your mouse cursor on the screen of the primary PC to the screen of the secon
20. press the I button 2 Move to SIZE amp POSITION using the Av buttons Next press the T button 3 Move to Menu H Position using the a v buttons Next press the T button 3 Move to Menu V Position using the 24v buttons Next press the T button The following screen will appear The following screen will appear lt gt Adjust Enter lt gt Adjust E Enter Ji 4 Adjust the Menu H Position setting using the lt gt buttons 4 Adjust the Menu V Position setting using the lt gt buttons 61 Chapter 9 Setup and Reset HUB 4 Move to Auto Wireless Detection using the A v buttons Next press the iE button The following screen will appear Series 7 Configure the settings to use the HUB function on the product To open the HUB menu screen press the Hut button on the stand Auto Wireless Detection for Series 7 only _ Adjust If a PC connects to the product via the wireless connection dongle the product will e Off Disable Auto Wireless Detection automatically detect the wireless connection and change the input source to Wireless e On Automatically change the input source to Wireless Connection mode if a wireless connection is Connection mode detected by the product 5 Press a v to move to the option you want and press T Enabling disabling Auto Wireless Detection 6 The selected option will be applied 1 Press TIL on the product NOTE 2 Move to SETUP amp RESET using t
21. reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in countries with separate collection systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system 85 Appendix erminolog OSD On Screen Display On screen display OSD allows you to customize on screen settings to optimize the picture quality as required You can change the screen brightness tint size and many other settings using menus displayed on the screen
22. self diagnosis test 1 Power off both the PC and product 2 Disconnect the cables from the product 3 Power on the product 4 If the message Check Signal Cable appears the product is working normally NOTE If the screen remains blank check the PC system video controller and cable Checking the Resolution and Frequency When a mode exceeds the supported resolution refer to Standard Signal Mode Table the message Not Optimum Mode will appear briefly Check the following Installation issue PC mode The screen keeps switching on and off SOLUTIONS Check that the cables are properly connected between the product and PC and that the connectors are firmly locked Screen issue The power LED is off The screen will not switch on SOLUTIONS Make sure that the power cable is connected The message Check Signal Cable appears Check that the cable is properly connected to the product Check that the device connected to the product is powered on 72 Troubleshooting Guide The message Not Optimum Mode appears on the screen The images on the screen look distorted The screen is not clear The screen is blurry The screen appears unstable and shaky There are shadows or ghost images left on the screen The screen is too bright The screen is too dark Screen color is inconsistent The colors on the screen have a shadow and are distorted White does not re
23. 0013 800 27919267 1 800 234 7267 00 1800 5077267 800 7267 0 800 777 08 1 800 682 3180 1 800 SAMSUNG 726 7864 0 800 100 5303 http www samsung com latin Spanish http www samsung com latin_en English http www samsung com latin Spanish http www samsung com latin_en English http www samsung com http www samsung com latin Spanish http www samsung com latin_en English http www samsung com latin Spanish http www samsung com latin_en English http www samsung com http www samsung com http www samsung com http www samsung com 0810 SAMSUNG 7267864 0 07 AUSTRIA BELGIUM BOSNIA BULGARIA CROATIA CYPRUS CZECH DENMARK EIRE ESTONIA FINLAND FRANCE GERMANY min 02 201 24 18 05 133 1999 07001 33 11 normal tariff 062 SAMSUNG 062 726 7864 8009 4000 only from landline http www samsung com http www samsung com be Dutch http www samsung com be_fr French http www samsung com http www samsung com http www samsung com 30 210 6897691 from mobile and http www samsung com land line 800 SAMSUNG 800 726786 Samsung Electronics Czech and Slovak s r o Oasis Florenc Sokolovska 394 17 180 00 Praha 8 70 70 19 70 0818 717100 800 7267 09 85635050 01 48 63 00 00 0180 5 SAMSUNG bzw 0180 5 7267864 0 14 Min aus dem dt Festnetz aus dem Mobilfunk max 0 42
24. 66 PC AV Mode 66 Configuring PC AV Mode 66 Auto Source 66 Configuring Auto Source 67 Display Time 67 Configuring Display Time 67 Key Repeat Time 67 Configuring Key Repeat Time 68 Off Timer On Off 68 Configuring Off Timer On Off 68 Off Timer Setting 68 Configuring Off Timer Setting 69 Reset 69 Restoring the default settings Reset Chapter 10 INFORMATION MENU AND OTHERS 70 INFORMATION 70 Viewing information INFORMATION 70 Configuring Brightness and Contrast in the Initial Screen 71 Configuring Volume in the Initial Screen 71 Configuring HUB in the Initial Screen Chapter 11 TROUBLESHOOTI NG GUI DE 72 Requirements Before Contacting Samsung Customer Service Center 72 Testing the Product 72 Checking the Resolution and Frequency 72 Check the following 74 Troubleshooting Guide 74 The Wireless Connection screen for Series 7 only 74 USB screen 74 Mobile Control and MHL 75 Q amp A Chapter 12 SPECI FICATIONS 77 General 78 Wireless transmitter receiver for Series 7 only 78 PowerSaver 79 Preset Timing Modes 79 Specifications of the dongle that connects to a PC for Series 7 only Chapter 13 APPENDI X 80 Contact SAMSUNG WORLD WIDE 84 Responsibility for the Pay Service Cost to Customers 85 Correct Disposal 86 Terminology 86 OSD On Screen Display 86 HUB 86 Wireless connection dongle for Series 7 only 86 Gamma 86 Grey scale 86 Scanning rate 86 Horizontal Fre
25. B 3 0 cable is connected to your PC or in Wireless Connection mode it is recommended to connect the USB cable to the black USB 2 0 port on the monitor N If the PC enters power saving mode while the Smart Station monitor is in Wireless Connection mode the Wireless Connection will be disconnected and the USB Hub function will be disabled NOTE Wireless Connection is supported on Series 7 only 20 Using Smart Station Software Installation for Using To use the product install on your PC the software provided with the product When installing the software for the first time follow the Automatic Installation instructions To maximize the performance of the Smart Station monitor visit www samsung com and upgrade the driver periodically NOTE Wireless Connection Manager is for Series 7 only Automatic installation when using a notebook PC 1 After opening the package connect the Smart Station monitor to your notebook PC using the USB cable provided in the package s542 PC IN USB ae p lt 2 After the connection is established between the Smart Station monitor and PC using the USB cable the following software programs required to use the Wireless Connection USB Hub and Mobile Control functions will automatically install Wireless Connection Manager for Series 7 only USB Display Driver Ethernet Driver Mobile Control e Do not remove the cable or turn off the product until install is c
26. C27B750X ser Manual The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance BN46 00219A 07 Table of Contents Chapter 1 BEFORE USING THE PRODUCT 5 Copyright 6 Securing the Installation Space 6 Safety Precautions 6 Symbols 7 Cleaning 7 Electricity and Safety 8 Installation and Safety 9 Operation and Safety 12 Correct posture to use the product Chapter 2 PREPARATION 13 Unpacking the Smart Station 13 Removing the Packaging 14 Checking the Components 15 Parts 15 Front Buttons 17 Rear View 17 Side 18 Adjusting the Product Tilt Chapter 3 USING SMART STATION 19 What is Smart Station 20 Read the Following before Using the Wireless Connection USB Hub Functions 21 Software Installation for Using Smart Station 21 Automatic installation when using a notebook PC 23 Automatic installation when using a desktop PC 25 Reinstall and Update 25 Connecting a PC to the Smart Station Monitor Product 26 Connecting to a PC Using the Wireless connection Dongle for Series 7 Only 30 Connecting to a PC Using a USB Cable 32 Monitor IP Setup 32 Dynamic IP 33 Static IP 35 What is Mobile Control 35 Using Mobile Control Sharing Your Keyboard Mouse Chapter 4 USING MHL 42 MHL Mobile High Definition Link 43 Using MHL 44 Disabling MHL Chapter 5 CONNECTING AND USING A SOURCE
27. ID 1 Press II on the product 2 Move to SETUP amp RESET using the a v buttons Next press the button 3 Move to HUB using the av buttons Next press the button 4 Move to Wireless ID using the a v buttons Next press the 12 4 button Adjust TE Enter 5 The Wireless ID will appear NOTE Wireless ID is supported on Series 7 only Adjust the power consumption of the product to save energy Configuring Eco Saving 1 Press II on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the iT button 3 Move to Eco Saving using the a v buttons Next press the button The following screen will appear E Enter 75 Reduce the power consumption of the product to 75 e 50 Reduce the power consumption of the product to 50 e Off Disable Eco Saving 4 Press Av to move to the option you want and press iT 5 The selected option will be applied 64 Setup and Reset Menu Transparenc Configure the transparency for the menu windows Configuring Menu Transparency 1 Press II on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the T button 3 Move to Menu Transparency using the A v buttons Next press the button The following screen will appear Adjust PF Enter 4 Press ayv to move to the option you want and press 5 The selected option will be applied Set the menu language
28. Power consumption 1 18 watts Typical 4095 length packet TFC1 Band Group 3 VESA 1280 x 1024 63 981 60 020 108 000 anlar 480 Mbps VESA 1440 x 900 55 935 59 887 106 500 Supported models C24B750X C27B750X VESA 1680 x 1050 65 290 59 954 146 250 sap VESA 1920 x 1080 67 500 60 000 148 500 arap 79 Chapter 13 pendix Contact SAMSUNG WORLD WIDE CHILE se Berne From mobile 02 482 82 00 NOTE COLOMBIA 01 8000112112 http www samsung com If you have any questions or comments relating to Samsung products please contact the SAMSUNG http www samsung com latin customer care Center Spanish COSTA RICA 0 800 507 7267 i English U S A 1 800 SAMSUNG 726 7864 http www samsung com http www samsung com latin http www samsung com ca Spanish English DOMINICA 1 800 751 2676 f CANADA 1 800 SAMSUNG 726 7864 http www samsung com latin_en http www samsung com ca_fr English French http www samsung com latin MEXICO 01 800 SAMSUNG 726 7864 http www samsung com Spanish ECUADOR 1 800 10 7267 English ARGENTINE 0800 333 3733 http www samsung com r http www samsung com latin BOLIVIA 800 10 7260 http www samsung com Spanish EL SALVADOR 800 6225 4 A L 0800 124 421 KAN http www samsung com latin en BRAZI 4004 0000 p www samsung com English 80 Appendix GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PERU PUERTO RICO TRINIDAD amp TOBAGO VENEZUELA 1 800 299
29. Til HDMI IN HDMI OUT 1 Connect an HDMI cable to the HDMI ports on the product and video device 2 Press the button on the product to change the input source to HDMI NOTE e Open the SETUP amp RESET menu Next set PC AV Mode to AV e Only Series 7 has an internal speaker e You can listen to the sound by connecting an audio output device headphones etc to the 09 port on the product Connecting to an Audio Output Connect an audio output device headphones etc to the A port on the product 50 Chapter 6 Screen Setup Configure the screen settings such as brightness and color tone You can customize the screen brightness and tint to suit your preferences SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used SAMSUNG The available menu options for MaG cBright vary depending on the PC AV Mode setting of SETUP amp RESET Configuring Mac cBright 1 Press on the product 2 Move to PICTURE using the a v buttons Next press the 33 button 3 Move to MAGIC using the v buttons Next press the T button 4 Move to Mac cBright using the 24v buttons Next press the button The following screen will appear In PC mode Custom Standard Game Cinema Dynamic Contrast Adjust E Enter e Custom Customize the contrast and brightness as desired Standard Obtain a pictu
30. able DC power adapter USB 3 0 cable 5 Mobile holder Wireless connection USB Connection Kit HDMI cable dongle Micro USB to Normal for Series 7 only USB Items sold separately NOTE The following items can be purchased at your nearest retailer LAN cable HDMI DVI cable USB 2 0 cable Using the components Mobile cable Use this cable to connect a mobile device or secondary PC to the product to enable the mobile control and MHL functions USB 3 0 cable Use this cable to connect the product to a PC The cable supports the USB Display USB HUB mobile control and MHL functions as well as sound Wireless connection dongle for Series 7 only Connect this dongle to a PC to use the mobile display function The cable supports the USB Display USB HUB mobile control and MHL functions as well as sound USB Connection Kit Micro USB to Normal USB The USB connection kit can be used to connect a mobile device or secondary PC to the product Connect the kit to a mobile device Next connect the mobile device to the secondary PC HDMI cable Use this cable to connect a secondary PC to the product The cable supports sound but is not compatible with the mobile control MHL and USB HUB functions 14 Preparation Key features USB Display feature This feature displays output to the screen through a USB cable page 30 USB HUB This feature can be used after connecting a mobile device
31. ally look white There is no image on the screen and the power LED blinks every 0 5 to 1 second SOLUTIONS This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product Set the maximum resolution and frequency according to the product specifications referring to the Standard Signal Mode Table Check the cable connection to the product Remove components video cable etc and try again Set the resolution and frequency to the recommended level Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product Then change the screen settings if required by referring to the additional information on the product menu Adjust the Brightness setting Adjust the COLOR settings Adjust the COLOR settings Adjust the COLOR settings The product is operating in power saving mode Press any key on the keyboard or move the mouse to return to normal operating mode Audio issues The integrated speaker is provided on Series 7 only There is no sound The volume is too low Other issues The stand generates heat Why is that Does this mean that the product is defective SOLUTIONS Check the connection of the stereo cable or adjust the volume Check that the source device connected to the product is powered on Adjust the volume If the volume is still low after turning it up to the maximum le
32. ange the picture size Screen Fit mia The available Image Size menu options depend on the setting of PC AV Mode under SETUP amp RESET Adjust Enter Config u ring mage Size e 4 3 This mode is suitable to view the 4 3 aspect ratio picture of video content or standard broadcasts Prreereeeeeereereeeeereerei tir ccCOrererer etree eeeereret tes cOreererererrereeeereree titty ti eserereresererseesererseeresersseesserseeeseereeeeseseeseesesreresesereresesepereseserereserereresesereseresereseesserssseseerseeeseeresseeee e 16 9 a This mode is suitable to view the 16 9 aspect ratio picture of DVD content or widescreen 1 Press I on the product broadcasts e Screen Fit This mode displays input without truncating the original picture e PC AV Mode is available in HDMI mode only The following screen will appear e Adjusting the H Position and V Position settings is possible if Image Size is set to Screen Fit 2 Move to SIZE amp POSITION using the v buttons Next press the I button 3 Move to Image Size using the v buttons Next press the I button In PC mode 4 Press av to move to the option you want and press 5 The selected option will be applied IF Enter e Auto Display the picture according to the aspect ratio of the input source e Wide Stretch the picture to full screen regardless of the aspect ratio of the input source 59 Resizing or Relocating the Screen Move the screen to the l
33. bile Control provides you with enhanced usability by allowing you to control two devices using a single keyboard and mouse and connect different kinds of devices To use the Mobile Control you must connect a mobile device that has the host function to the Smart Station monitor Using the Mobile Control function is not possible when a mobile device that does not have the host function is connected Using Mobile Control Sharing Your Keyboard Mouse Connect your PC to the Smart Station monitor using the USB cable provided in the package The Mobile Control and Wireless Connection Manager software will automatically install NOTE e Check the instructions according to the type and operating system of your mobile device e The software may not install automatically due to an anti virus program on the PC If this is the case install Mobile Control by running the program install file on the provided manual CD e Wireless Connection Manager is for Series 7 only About Mobile Control Mode Charging Control Mode The battery of the connected device can be charged The mouse movement will slow down slightly the moment the mouse pointer focus is moved to the connected device The battery will not charge if the keyboard and mouse pointer focus is on the mobile device e Fast Control Mode The connected device cannot be charged The keyboard and mouse pointer focus can be quickly
34. can use the same connection method as the Android smartphone Refer to Android smartphones page 37 e Charging Control Mode is not supported and battery charging is not possible e Before connecting to your mobile device check that the Mobile Control icon is found on the far right side of the taskbar 1 Connect the mobile cable to the USB Connection Kit Next connect the tablet to the Smart Station monitor using the connected mobile cable and USB Connection Kit 2 After the connection is established Fast Control Mode will be set as default The charging function will not be available When the USB Connection Kit Micro USB to Normal USB is connected Fast Control Mode is the default mode Charging Control Mode will not be available To charge your tablet connect the tablet to a USB port on the Smart Station monitor using the USB cable provided with the tablet NOTE e High speed charging is possible using the 8544 1 port only This port allows you to charge a mobile device twice as fast compared to when charging using a standard USB port e USB Super Charging mode can be set to Off or On by pressing the Hub button In On mode data transfer is not possible 3 To move the keyboard and mouse pointer focus to the tablet press the mouse wheel or the shortcut keys Alt S on the keyboard The mouse cursor will move to the tablet You can now use the keyboard and mouse on your tablet NOTE e If the keyboard
35. d or cause an injury Using the product in an area with excess vibration may damage the product or cause a fire Do not install the product in a vehicle or a place exposed to dust moisture water drips etc oil or smoke A fire or electric shock may result Before Using the Product Do not expose the product to direct sunlight heat or a hot object such as a stove The product lifespan may be reduced or a fire may result Do not install the product within the reach of young children The product may fall and injure children Edible oil such as soybean oil can damage or deform the product Do not install the product in a kitchen or near a kitchen counter Do not drop the product while moving Product failure or personal injury may result Do not set down the product on its front The screen may become damaged When installing the product on a cabinet or shelf make sure that the bottom edge of the front of the product is not protruding The product may fall and break or cause a personal injury Install the product only on cabinets or shelves of the right size Set down the product gently Product failure or personal injury may result at t Installing the product in an unusual place a place exposed to a lot of fine particles chemical substances or e
36. dary PC The keyboard and mouse pointer focus will move in the same manner as when using dual displays Alternatively press the mouse wheel or the shortcut keys Alt S on the keyboard The shortcut keys can be customized I ib For details on changing the shortcut keys refer to Changing the Settings page 40 USB Connection Kit Micro USB to Normal USB 39 Using Smart Station Changing the Settings Changing the position of a PC Mobile Control Right cli ile Control i he far right side of th kbar 1 Right click on the Mobile Control icon on the far right side of the taskbar When connected to two PCs The following context menu items will appear Select Mode Preferences Online Update About Mobile Control Help 1 Connect the primary PC to the Smart Station monitor using the provided USB cable or wireless connection dongle Exit 2 Connect the secondary PC to the Smart Station monitor using the mobile cable and USB Connection Kit Micro USB to Normal USB 2 Select Options from the context menu items NOTE You can change the settings as required You can also customize the shortcut keys For details on how to connect to two PCs refer to the section Connecting to two PCs page 39 Preference 3 After the connection is established Fast Control Mode will be set as default eng Malone 4 If two PCs are connected to the product the op
37. device on your PC disabled and the network device of the Smart Station monitor Ensure the network device you are not using is set to Disable e To use the LAN network on your PC change the settings accordingly Set the network device of the Smart Station monitor to Disable Enable the network device on the PC Configure the IP 5 Click the Close button r Q Local Area Connection 8 Properties Networking Connect using AP LAN9512 LAN9514 USB 2 0 Ethernet 10 100 Adapter 7 CG This connection uses the following items M 8 Client for Microsoft Networks IE QoS Packet Scheduler dB Fie and Printer Sharing for Microsoft Networks Intemet Protocol Version 6 TCP IP v6 4 Intemet Protocol Version 4 TCP IPv4 4 amp Link Layer Topology Discovery Mapper I O Driver 4 Link Layer Topology Discovery Responder Install Uninstall Properties Description Allows your computer to access resources on a Microsoft network a aa 34 Using Smart Station What is Mobile Control The Mobile Control program allows you to control a device smartphone tablet notebook PC etc connected to the Smart Station monitor using a keyboard and mouse connected to the Smart Station monitor or PC You can move the input focus of the keyboard and mouse from your PC to a smartphone for convenience You can also use a tablet as a secondary display The Mo
38. e IE button The following screen will appear lt gt Adjust E Enter 4 Adjust the Blue setting using the lt gt buttons 57 Configuring the Tint Settings SAMSUNG Not available if mag cColor is in Full or Intelligent mode Configuring Color Tone 1 Press ID on the product 2 Move to COLOR using the a v buttons Next press the T button 3 Move to Color Tone using the av buttons Next press the E button The following screen will appear Normal Adjust E Enter e Cool 2 Set the color temperature to be cooler than Cool 1 mode e Cool 1 Set the color temperature to be cooler than Normal mode e Normal Display the standard color tone e Warm 1 Set the color temperature to be warmer than Normal mode e Warm 2 Set the color temperature to be warmer than Warm1 mode e Custom Customize the color tone 4 Press jv to move to the option you want and press Te 5 The selected option will be applied Gamma Adjust the mid range brightness Gamma of the picture Configuring Gamma 1 Press on the product 2 Move to COLOR using the Av buttons Next press the button 3 Move to Gamma using the Av buttons Next press the IE button The following screen will appear Adjust E Enter 4 Press a v to move to the option you want and press 5 The selected option will be applied 58 Chapter 8 Resizing or Relocating the Screen Ch
39. e In this mode it may take a while to shift the keyboard and mouse pointer focus to the smartphone 3 To move the keyboard and mouse pointer focus to the smartphone press the mouse wheel or the shortcut keys Alt S on the keyboard The mouse cursor will move to the smartphone You can now use the keyboard and mouse on your smartphone NOTE e If the keyboard or mouse input focus is on the mobile device the PC cannot be controlled using the same input device keyboard or mouse e To move the keyboard and mouse input focus back to the PC press the center button on the mouse or press the shortcut keys Alt S on the keyboard 4 To move the keyboard and mouse pointer focus to the smartphone more quickly double click the Mobile Control icon on the far right side of the taskbar and activate Fast Control Mode In this mode shifting the keyboard and mouse pointer focus is faster and the battery charging function is not available NOTE The shortcut keys can be customized For details on changing the shortcut keys refer to Changing the Settings page 40 37 Using Smart Station Android tablet When your mobile device has a normal USB port Mobile devices should be purchased separately Wired connection Wireless connection for Series 7 only oo Q USB Connection Kit Micro USB to Normal USB NOTE e If your tablet has a Micro USB port you
40. e and is measured in Hz A scanning rate of 60Hz means that the screen refreshes 60 times per second The screen scanning rate depends on the performance of the graphics cards in your PC and monitor Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots pixels Pixels are transmitted in horizontal lines which are then arranged vertically to create an image The horizontal frequency is measured in kHz and represents how many times horizontal lines per second are transmitted and displayed on the monitor screen A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second The horizontal frequency is indicated in 85kHz Vertical Frequency One image is made of numerous horizontal lines The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines A vertical frequency of 60 means that an image is transmitted 60 times per second The vertical frequency is also called refresh rate and affects screen flicker 86 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen It represents the level of display detail A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time E g A resolution of 1920 x 1080 consists of 1920 horizontal pixels horizonta
41. e function to quickly charge a source device connected to the blue USB 3 0 port Adjust 5 Press a v to move to the option you want and press T 6 The selected option will be applied Select Source Select the input source that will be displayed on the product Changing the input source using Select Source 1 Press I on the product 2 Move to SETUP amp RESET using the Av buttons Next press the T button 3 Move to HUB using the a v buttons Next press the Fx button 4 Move to Select Source using the a v buttons Next press the button The following screen will appear Series 5 Series 7 Adjust EB Enter Adjust e HDMI Change the input source to HDMI mode e USB Change the input source to USB mode e Wireless Connection Change the input source to Wireless Connection mode e MHL Change the input source to MHL mode 5 Press a v to move to the option you want and press I 6 The selected option will be applied NOTE Wireless Connection is supported on Series 7 only E Enter 63 Setup and Reset Wireless ID for Series 7 only Wireless ID refers to a unique ID assigned to each product The Wireless Connection Manager program identifies products within an effective range by detecting this unique ID of each product The wireless ID is displayed at the bottom of the HUB menu screen and in the Wireless Connection Manager program Viewing the Wireless
42. e if Mac cColor is in Full or Intelligent mode Configuring Contrast 1 Press on the product 2 Move to PICTURE using the a v buttons Next press the T button 3 Move to Contrast using the a v buttons Next press the I button The following screen will appear lt gt Adjust E Enter A Adjust the Contrast setting using the lt gt buttons 53 Screen Setup Make the outline of objects more clear or blurry Range 0 100 A higher value will make the outline of objects clearer SAMSUNG e Not available if maG cBright is in Cinema or Dynamic Contrast mode e Not available if Mac ccolor is in Full or Intelligent mode Configuring Sharpness 1 Press II on the product 2 Move to PICTURE using the Ayv buttons Next press the i button 3 Move to Sharpness using the Ayv buttons Next press the Z334 button The following screen will appear lt gt Adjust IF Enter 4 Adjust the Sharpness setting using the lt gt buttons Accelerate the panel response rate to make video appear more vivid and natural NOTE e It is recommended to set the response rate to Normal or Faster when you are not viewing a video e The functions available may vary depending on the product model Refer to the actual product Configuring Response Time 1 Press on the product 2 Move to PICTURE using the a v buttons Next press the T button 3 Move to Response Time us
43. e network settings on the PC The DHCP service is convenient and useful especially in an environment where many PCs are used Generally the IP address should change each time the PC boots up or an IP allocation is requested In most cases however the existing IP address is re allocated An Internet router performs two roles at the same time It creates a private internal IP address NAT service and automatically allocates the IP address to each PC DHCP service 32 Using Smart Station NOTE When using the LAN network of the Smart Station monitor or PC ensure you connect the LAN cable to only one of the two networks If you connect the LAN cable to both networks a system crash may occur 1 Connect the LAN cable to the Smart Station monitor 2 Set the network device of the Smart Station monitor to Enable using the Network Settings menu NOTE To enable the network device of the Smart Station monitor go to Control Panel Network and Internet Network and Sharing Center Change adapter settings Select the Smart Station monitor network device displayed as LAN9512 LAN9514 USB 2 0 to Ethernet 10 100 Adapter Right click on your mouse Select Enable Control Panel Network and Internet Network Connections Organize v Enable this network device Disgnose this connection Rename this connection Change settings of this connect eve Name Q Local Area Connection abies Intol R 6NF abit Net
44. e product outdoors where it can be exposed to rain or snow Take extra care to ensure the DC power adapter does not get wet when cleaning the floor with water Do not leave the DC power adapter near a heat source Otherwise a fire may result Keep the DC power adapter in a location with good ventilation Looking at the screen too close for an extended period of time can deteriorate your eyesight Do not hold the product upside down or move it by holding the stand The product may fall and break or cause a personal injury Do not use humidifiers or stoves around the product A fire or electric shock may result Rest your eyes for more than 5 minutes for every 1 hour of product use Eye fatigue will be relieved Do not touch the screen when the product has been turned on for an extended period of time as it will become hot 11 Before Using the Product Store small accessories out of the reach of children Use the product in the correct posture as follows Do not place heavy objects on the product NG er 4e e Straighten your back e Allow a distance of 45 to 50cm between your eye and the screen and look slightly downward at the screen Keep EN your eyes directly in front of the screen Product failure or personal injury may result Adjust the angle so light does not reflect on the screen Keep your forearms perpendicular to y
45. eft or right NOTE e Available only when PC AV Mode is set to AV e PC AV Mode is available in HDMI mode only Configuring H Position 1 Press on the product 2 Move to SIZE amp POSITION using the av buttons Next press the ies button 3 Move to H Position using the a v buttons Next press the E button The following screen will appear E Enter e Adjusting the H Position and V Position settings is possible if Image Size is set to Screen Fit 4 Adjust the H Position setting using the lt gt buttons Move the screen up or down NOTE e Available only when PC AV Mode is set to AV e PC AV Mode is available in HDMI mode only Configuring V Position 1 Press on the product 2 Move to SIZE amp POSITION using the a v buttons Next press the button 3 Move to V Position using the a v buttons Next press the E button The following screen will appear E Enter e Adjusting the H Position and V Position settings is possible if Image Size is set to Screen Fit 4 Adjust the V Position setting using the lt gt buttons 60 Resizing or Relocating the Screen Menu H Position Menu V Position Move the menu position to the left or right Move the menu position up or down Configuring Menu H Position _____ Configuring Menu V Position 1 Press ID on the product 1 Press EL on the product 2 Move to SIZE amp POSITION using the av buttons Next
46. er when installing the product The exterior may differ depending on the product an tom 00 a 10 au big cm 7 ie 10 cm Precautions for storage High glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product Service fee will be charged Safety Precaution Caution Do not open the cover You may suffer an electric shock The components inside this product must not be repaired by home users Contact a technician for repair Warning A serious or fatal injury may result if instructions are not followed Personal injury or damage to properties may result if instructions are Caution not followed OQ Activities marked by this symbol are prohibited Instructions marked by this symbol must be followed Before Using the Product The following images are for reference only Real life situations may differ from what is shown in the images Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched Take the following steps when cleaning 1 Power off the product 2 Remove the power cable from the product NOTE Hold the power cable by the plug and do not touch the cable with wet hands Otherwise an electric shock may result 3 Wipe the product screen using a clean soft and dry cloth
47. ersonalization Personalize Screen Saver Settings or BIOS SETUP on the PC e Windows 7 Set power saving mode in Control Panel gt Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Refer to the user manual for your PC or graphics card for further instructions on adjustment 76 Chapter 12 Specifications Panel Synchronization Display Color Resolution Size Display area Pixel pitch Horizontal Frequency Vertical Frequency Optimum Resolution Maximum Resolution 24 inches 61 cm 531 36 mm H x 298 89 mm V 20 9 inches H x 11 8 inches V 0 27675 mm H x 0 27675 mm V 0 010896 inches H x 0 010896 inches V 30 81 kHz 49 75 Hz 16 7M RGB 8 bit 1920 x 1080 1920 x 1080 C24B750X 24 inches 61 cm 531 36 mm H x 298 89 mm V 20 9 inches H x 11 8 inches V 0 27675 mm H x 0 27675 mm V 0 010896 inches H x 0 010896 inches V C27B750X 27 inches 69 cm 597 6 mm H x 336 15 mm V 23 5 inches H x 13 2 inches V 0 31125 mm H x 0 31125 mm V 0 012254 inches H x 0 012254 inches V Maximum Pixel Clock Power Supply Side Ports Rear View HDMI input resolution Dimensions W x H x D Weight Operating Environmental conditions Storage Panel Dots Pixels 165 MHz Digital USB This product uses 100 to 240V Refer to the label at the back
48. et 10 100 Adapter Right click on your mouse Select Properties Select Internet Protocol Version 4 TCP I Pv4 gt Select Properties Configure the static IP and DNS settings i Local Area Connection 4 Properties ee cpe Internet Protocol Version 4 TCP IP Properties woe You can get IP settings asagned automaticaly if your network supports thes capability Otherwise you need to ask your network administrator for the appropriate IF settings Obtan on IP address automatcalr Une the folowing P mich eu I addres ar Sukat mask ass Defaut gateway w btan DG server adden asonaicabr 8 Use the folowing DNS server addresses Preferred DNS server 164 Aiernahe ONS server KA ay Vakdate settings upon exit LANG9512 LAN9514 USB 20 to Ethernet 10 100 Adapter 4 After setting the IP click OK When the following message appears click No Microsoft TCP IP u d Warning Multiple default gateways are intended to provide redundancy to a single network such as an intranet or the Internet They will not function properly when the gateways are on two separate disjoint networks such as one on your intranet and one on the Internet Do you want to save this configuration e e e A static IP address is assigned to a single network device The above message appears when the same static IP address is assigned to both the LAN network
49. from the power socket e Mobile devices should be purchased separately MOBILE 28 Using Smart Station LAN Connection Wireless Wireless Connection is supported on Series 7 only For details on how to establish a LAN connection using a USB cable refer to LAN Connection Wired page 32 The Smart Station function allows you to access the Internet from your PC by connecting the LAN cable to the product when connected to a PC There is no need to directly connect the LAN cable to the PC LAN disconnection You can remove the LAN cable using a flat head screwdriver or ruler SAMSUNG 29 Using Smart Station Connecting to a PC Using a USB Cable For details on how to establish a wireless connection using the wireless connection dongle refer to Connecting to a PC Using the Wireless connection Dongle page 26 ss amp PC IN e 1 Connect the USB cable to the ss PC IN port on the back of the product and a USB port on the PC 2 Press the Hub button on the front of the product to change Select Source to USB Alternatively press the button to change the input source to USB NOTE e The product is compatible with a USB 2 0 cable However it is best to use a USB 3 0 cable to ensure full functionality of the product e The product screen may appear blank when some notebook PCs are connected u
50. g Samsung Customer Service Center 72 Reset 69 Response Time 54 Safety Precautions Sharpness Software Installation for Using Smart Station Terminology Troubleshooting Guide Unpacking the Smart Station 13 Using MHL 43 Using the Mobile Control 36 Using the Mobile device Holder 40 V Position What is Mobile Control 35 What is Smart Station 19 Wireless transmitter receiver 78
51. gnal reception Wireless communication can be affected by the surrounding environmental conditions Do not place any object or obstruction between the product and PC Objects obstructions can affect the sensitivity of the 1 Install the wireless connection software automatically by connecting the provided USB signal transmission reception cable before connecting the dongle refer to page 20 Using a wireless connection is e The wireless connection dongle on the PC must point at the product Ensure the product and PC are at possible only when the wireless connection software Wireless Connection Manager is the same level installed e If the product and PC are not placed at the same level as shown in the image the table can be an oan er obstacle and degrade wireless performance even though the dongle on the PC is pointing at the product 2 When automatic installation is complete disconnect the USB cable Next connect the j e The sensitivity of the signal reception transmission can affect the performance of video or game wireless connection dongle provided in the package to a USB port on the PC playback choppy or slowed down video 3 Press the Hut button on the front of the product to change Select Source to Wireless e To maximize the signal transmission reception insert the wireless connection dongle into the nearest Connection Alternatively press the Z button to change the input source to Wireless VSB port OM tNE RC
52. he A v buttons Next press the T button Auto Wireless Detection is supported on Series 7 only 3 Move to HUB using the Ay buttons Next press the button NOTE To open the OSD menu where you can adjust the HUB settings press the Hub button on the stand 62 Setup and Reset USB Super Charging Charge the battery of a connected source device quickly using the blue USB 3 0 port on the product NOTE e Setting USB Super Charging to On during a data transfer will stop the data transfer If you set USB Super Charging to Off the standard charging and data transfer feature will be available When USB Super Charging is disabled the USB connection indicator icon will not be shown on the mobile device display This does not mean that the mobile device is disconnected e The input source does not need to be changed e High speed charging is possible using the ss 1 port only This port allows you to charge a mobile device twice as fast compared to when charging using a standard USB port Enabling disabling USB Super Charging 1 Press on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the I button 3 Move to HUB using the v buttons Next press the button 4 Move to USB Super Charging using the v buttons Next press the iE button The following screen will appear Series 5 Series 7 Adjust TE Enter Off Disable USB Super Charging e On Enable th
53. he PC a customized resolution will be applied NOTE e When multiple display output ports on the PC are connected to the product at the same time each display signal output depends on the system specifications of the PC e Wireless Connection is supported on Series 7 only 25 Using Smart Station Connecting to a PC Using the Wireless NOTE connection Dongle for Series 7 Only e If a wireless connection cannot be established double click Wireless Connection Manager installed on the PC to connect to a detected monitor Wireless Connection is supported on Series 7 only e The Smart Station monitor automatically connects to the PC where the wireless connection dongle is connected when the PC is moved closer It automatically disconnects when the PC is moved away For details on how to connect using a USB cable refer to Connecting to a PC Using a To use this function set Auto Wireless Detection to On in the Hub menu USB Cable page 30 Precautions To connect a PC to the Smart Station wirelessly for Series 7 C24B750X and C27B750X users refer to the following To use the Wireless Connection function you must connect the wireless connection dongle provided as a component to a USB port on the PC The wireless connection dongle allows a wireless connection between the product and a PC The dongle connected to the PC should NOTE point at the product to maximize si
54. he value of the color red in the picture Range 0100 A higher value will increase the intensity of the color NOTE SAMSUNG Not available if MAGIcColor is in Full or Intelligent mode Configuring Red 1 Press on the product 2 Move to COLOR using the Ajv buttons Next press the iT button 3 Move to Red using the a v buttons Next press the T button The following screen will appear COLOR O Return lt gt Adjust E Enter 4 Adjust the Red setting using the lt gt buttons 56 Configuring the Tint Settings Adjust the value of the color green in the picture Range 0 100 A higher value will increase the intensity of the color SAMSUNG Not available if MagicColor is in Full or Intelligent mode Configuring Green 1 Press II on the product 2 Move to COLOR using the jv buttons Next press the i button 3 Move to Green using the av buttons Next press the f4 button The following screen will appear lt gt Adjust E Enter 4 Adjust the Green setting using the lt gt buttons Blue Adjust the value of the color blue in the picture Range 0100 A higher value will increase the intensity of the color SAMSUNG Not available if MAgicColor is in Full or Intelligent mode Configuring Blue 1 Press on the product 2 Move to COLOR using the jv buttons Next press the button 3 Move to Blue using the Ayv buttons Next press th
55. ice using an HDMI cable Connect to a network using a LAN cable BG Connect to a PC using a USB cable ss PC IN NOTE This port can connect to a PC only DC 14V Connect to a DC power adapter The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality poms aout rons Connect to a mobile device when you want to use the MHL or Mobile Control function with the mobile cable MOBILE NOTE A connection kit is required to connect to some mobile devices Connection kit is sold separately Connect to a source device using a USB 3 0 cable mu um NOTE Nang High speed charging is possible using the 85 34 1 port only This port allows you to charge a mobile device twice as fast compared to when charging using a standard USB port 17 Preparation Q ABOUT PORTS Connect to a source device using a USB 2 0 cable NOTE High speed charging is not possible using this port For high speed charging connect your mobile device to the USB 3 0 8544 1 port Connect to an audio output device such as headphones The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality 87mm A The angle indicates the range the product can be tilted when in use The angle indicates the range the product can be tilted when packaged
56. ill be applied 67 Setup and Reset Off Timer On Off You can set the product to automatically turn off Configuring Off Timer On Off 1 Press II on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the button 3 Move to Off Timer On Off using the a v buttons Next press the iE button The following screen will appear Adjust E Enter e Off Deactivate the off timer so that the product does not power off automatically e On Activate the off timer so that the product powers off automatically 4 Press a v to move to the option you want and press 5 The selected option will be applied Off Timer Setting The off timer can be set within a range of 1 to 23 hours The product will automatically power off after the specified number of hours NOTE Available only when Off Timer On Off is set to On Configuring Off Timer Setting 1 Press on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the T button 3 Move to Off Timer Setting using the Ajv buttons Next press the T button The following screen will appear TE Enter 4 Configure the Off Timer Setting lt gt buttons NOTE For products for the market in Europe the Off Timer On Off is set to automatically activate 4 hours after the product powers on This is done in accordance with power supply regulations If you do not want the timer to activate go
57. ing the a v buttons Next press the I button The following screen will appear Adjust E Enter e Normal Faster Fastest 4 Move to the desired option using the a v buttons Next press the button 5 The selected option will be applied 54 Screen Setup HDMI Black Level If you connect a DVD player or set top box to the product using an HDMI cable the contrast and color may degrade making the picture look darker If this is the case correct the degraded picture quality using the HDMI Black Level menu Configuring HDMI Black Level 1 Press on the product 2 Move to PICTURE using the Ayv buttons Next press the F3 button 3 Move to HDMI Black Level using the a v buttons Next press the F3 button The following screen will appear EB Enter e Normal Set the brightness of the darkest parts of the screen to be normal e Low Set the brightness of the darkest parts of the screen to be darker than Normal mode 4 Press a v to move to the option you want and press Tl 5 The selected option will be applied NOTE e Available only when the product is connected to a source device using an HDMI cable e The HDMI Black Level function may not be compatible with some source devices 55 Chapter 7 Configuring the Tint Settings Adjust the tint of the screen Information in this chapter is not applicable if Mac cBright is in Cinema or Dynamic Contrast mode Red Adjust t
58. l resolution and 1080 vertical lines vertical resolution Plug amp Play The Plug amp Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment The monitor uses VESA DDC international standard to execute Plug amp Play MHL Mobile High Definition Link The MHL feature allows you to view videos and photos saved on a connected mobile device that supports MHL using the product screen 87 Index Auto Source 66 Blue 57 Brightness 53 Changing the Settings 40 Cleaning 7 Color Tone 58 Components 14 Configuring Brightness in the Initial Screen 70 Configuring HUB in the Initial Screen 71 Configuring Volume in the Initial Screen 71 Connecting and UsingaPC 46 Connecting a PC to the Smart Station Monitor Product 25 Connecting to an Audio Output Device 50 Connecting to a Video Device 50 Contrast 53 Copyright 5 Correct posture to use the product 12 Disabling MHL 44 Display Time 67 Gamma 58 General 77 Green 57 HDMI Black Level 55 H Position 60 HUB 62 Image Size 59 INFORMATION 70 Items sold separately 14 Key Repeat Time 67 Language 65 MAGIC 51 Menu H Position 61 Menu Transparency 65 Menu V Position 61 MHL 42 Monitor IP Setup 32 Off Timer On Off 68 Off Timer Setting 68 Parts 14 PC AV Mode 66 Power Consumption 78 PowerSaver 78 Preset Timing Modes 79 Q amp A 75 88 Red 56 Requirements Before Contactin
59. lly detect the input source e Manual Manually select an input source 4 Press A v to move to the option you want and press 5 The selected option will be applied 66 Setup and Reset Display Time Set the on screen display OSD menu to automatically disappear if the menu is not used for a specified period of time Display Time can be used to set the time after which you want the OSD menu to disappear automatically Configuring Display Time 1 Press on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the button 3 Move to Display Time using the 7v buttons Next press the i button The following screen will appear Adjust Enter e 5 sec 10 sec 20 sec 200 sec 4 Move to the desired option using the Ajv buttons Next press the I button 5 The selected option will be applied Key Repeat Time Control the response rate of a button when the button is pressed Configuring Key Repeat Time 1 Press EL on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the iT button 3 Move to Key Repeat Time using the v buttons Next press the T button The following screen will appear E Enter e The available options include Acceleration 1 sec and 2 sec If No Repeat is selected a button will respond only when it is pressed 4 Press a v to move to the option you want and press i 5 The selected option w
60. ls etc to the product using it as a hub e A PC cannot connect to multiple source devices at the same time because there are a limited number of input output ports available The HUB feature of the product will improve your work efficiency by allowing you to connect source devices peripherals etc to the USB ports on the product without the need to connect them to a PC e Connecting source devices to the product will make your work area tidy and improve the portability of your notebook PC compared to when connecting them to the notebook PC The product has one mobile port and three USB ports including one Ethernet port Refer to page 17 18 for further details on the ports e Connect a mobile device such as an MP3 player or smartphone to the product when connected to a PC This allows you to control the device from the PC or charge the device battery NOTE e To detect and start a source device faster connect the device to the blue USB 3 0 port on the product e An external mass storage HDD requires an external power supply Be sure to connect it to a power source e High speed charging is possible using the s544 1 port only This port allows you to charge a mobile device twice as fast compared to when charging using a standard USB port e Battery charging is possible in power saving mode However it is not possible when the product is powered off e Note that the battery will not be charged if the power cable is disconnected
61. moved to the connected device NOTE Mobile Control supports only mobile devices that have the USB Host function Support for this feature depends on the specifications of your mobile device Galaxy S2 is supported Galaxy products made by Sprint United States and AT amp T United States are not supported because they do not have the USB Host function 35 Using Smart Station Using the Mobile Control e Connect your PC to the product using the wireless connection dongle or a USB cable NOTE e Connect your PC to the product using the wireless connection dongle or a USB cable e For further details on how to connect refer to Software Installation for Using Smart Station page 21 O Connect the mobile device to the product using the mobile cable NOTE e A connection kit is required to connect to some mobile devices e For further details on how to connect refer to Connecting and Using Devices by Type page 37 If the PC is connected to the product Mobile Control and Wireless Connection Manager will automatically install NOTE e If installation does not start automatically install the Mobile Control program using the install file found on the user manual CD provided e Wireless Connection Manager is for Series 7 only To move the mouse and keyboard pointer focus to the mobile device
62. nce or functionality 42 Using MHL Using MHL MOBILE TJ 1 Connect the Micro USB port on the mobile device to the MOBILE port on the product using the mobile cable 2 Connect the DC power adapter to the product and a power socket 3 After the power is connected the product will automatically detect and change the input source e Press the Hub button and set Select Source to MHL e f the input source is not set to MHL press the i button to change the input source NOTE e Mobile devices should be purchased separately e MHL output resolution can vary by mobile device manufacturer For this reason the picture quality of images displayed on the product may not be the same 4 If the following message appears MHL mode is activated After about 3 seconds the MHL screen will be displayed HDMI USB Wireless Connection MHL MHL f 3 sec later MHL activated ud MHL e Wireless Connection is displayed on Series 7 only NOTE The indicated time after 3 seconds may vary depending on the mobile device When the mobile device is in power saving mode NOTE When the mobile device is in power saving mode the following message will appear in place of the MHL screen To display the MHL screen deactivate power saving mode MHL device is in sleep mode 43 Using MHL When the mobile device is not con
63. nctions you must make a connection as follows Series 5 users Connect using only a USB cable Series 7 users Connect using a USB cable Alternatively connect wirelessly using the wireless connection dongle Connection Using an HDMI Cable Digital Type HDMI IN HDMI OUT gt M 1 Connect the HDMI port on the back of the product to the HDMI port on the PC using an HDMI cable 2 Connect the DC power adapter to the product and a power socket Next turn on the power switch on the PC 3 Press the 3 button on the product to change the input source to HDMI NOTE e Open the SETUP amp RESET menu Next set PC AV Mode to PC e Only Series 7 has an internal speaker e You can listen to the sound by connecting an audio output device headphones etc to the 03 port on the product e To use the USB Hub and Mobile Control functions you must make a connection as follows Series 5 users Connect using only a USB cable Series 7 users Connect using a USB cable Alternatively connect wirelessly using the wireless connection dongle 46 Connecting and Using a Source Device Driver Installation e You can set the optimum resolution and frequency for this product by installing the corresponding drivers An installation driver is contained on the CD supplied with the product e If the provided file is faulty visit the Samsung Electronics homepage http www samsung com and download the file
64. nected or does not support MHL NOTE e Mobile Control and MHL are not supported at the same time e If the mobile device is not connected or the connected mobile device does not support the MHL function the following screen will appear e If MHL mode does not activate check the connection of the mobile device If MHL mode does not activate check if the mobile device supports MHL If MHL mode does not activate even though the mobile device supports MHL update the firmware on the device to the latest version 3 sec late Ea MHL device is not connected or Check Signal Cable MHL the device doesn t support MHL The indicated time after 3 seconds may vary depending on the mobile device Disabling MHL When the cable is disconnected or the mobile device is powered off If the mobile cable is disconnected or the mobile device is powered off when MHL is active the MHL function will be disabled MHL Ponto J 3 sec later e If the mobile cable is disconnected the product will display the message Check Signal Cable and remain in MHL mode e The indicated time after 3 seconds may vary depending on the mobile device 44 Chapter 5 Connecting and Using a Source Device Checklist before Connecting to Pre connection Checkpoints Check the available ports on the back of the source device Sou
65. number of a horizontal cycle is called horizontal frequency Horizontal frequency is measured in kHz This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel Therefore a resolution other than the specified resolution may degrade the picture quality To avoid this it is recommended that Vertical Frequency you select the optimum resolution specified for the screen size of your product Repeating the same picture dozens of times per second allows you to view natural pictures The repeat frequency is called vertical frequency or refresh rate and is indicated in Hz If a signal that belongs to the following standard signal modes is transmitted from your PC the screen will automatically be adjusted If the signal transmitted from the PC does not oe ee ee A e ar Specifications of the dongle that connects to a PC for Series 7 onl the graphics card user manual VESA 640 x 480 AE 50 040 95 175 Host interface USB 2 0 downstream interface VESA 800 x 600 35 156 56 250 36 000 fe Frequency range a 10 6GHz Operating at 3 16GHz 8 97GHz BG1 BG2 VESA 800 x 600 37 879 60 317 40 000 anlar Security AES128 VESA 1024 x 768 48 363 60 004 65 000 f Data transmission rate 53 3 to 480 Mbps VESA 1280 x 800 49 702 59 810 83 500 IE Sensitivity Power output Transmission signal PSD 41 3 dBm MHz limit 41 3dBm MHz VESA 1280 x 960 60 000 60 000 108 000 alia
66. of the product as the standard voltage can vary in different countries Mobile connect 20p 3 0 USB downstream Super charging available 3 0 USB downstream 2 0 USB Downstream Headphone out DC Jack USB 3 0 upstream LAN Jack HDMI 1920 x 1080 5728X CTS X 232 9 mm 22 6 57218 ADIL 232 9 mm 22 6 646 7 x 472 3 x 232 9 mm 25 5 x 16 9 x 9 2 x 16 9 x 9 2 x 18 6 x 9 2 inches 4 1 kg inches 4 1 kg inches 5 0 kg 9 0 Ibs 9 0 Ibs 11 0 Ibs Temperature 50 F 122 F 10 C 50 C Humidity 10 90 non condensing Temperature 4 F 113 F 20 C 45 C Humidity 5 90 non condensing Due to the nature of the manufacturing of this product approximately 1 pixel per million 1ppm may be brighter or darker on the LCD panel This does not affect product performance 77 Specifications The above specifications are subject to change without notice to improve quality This device is a Class B digital apparatus USA Only Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 Wireless transmitter receiver for Series 7 The wireless equipment mentioned below may cause interference and should not be used for services where personal safety is at risk Device name model UWB undesignated purpose device device that uses the UWB name technology
67. olume do the following Run the provided CD then select the desired language e Check that the USB 3 0 or HDMI cable is properly connected Click SAMSUNG Smart Station to install the program manually e Only Series 7 has an internal speaker NOTE ns the sound output port settings according to the conditions where the product is e Loading the install file may take a while NG Control Panel gt Sound Speakers Configure Speakers e Do not remove the cable or turn off the product until install is complete SyncMaster C24B550U C24B750X C27B750X A Adobe Acrobat Reader Windows Driver SAMSUNG Smart Station Tr sammes a needed to une De Dever Slaten haben Gm laman 2 User Manual w Regulatory Compliance Statements ox 6 After installation make the required connections and use the product as instructed below For Series 5 users Disconnect the HDMI cable Next connect the monitor to the PC using only the USB cable For Series 7 users Disconnect the HDMI and USB cables Next connect the monitor to the PC using the wireless connection dongle e Click the volume icon on the Windows taskbar to adjust the volume EJ 7 Press the Hub button on the front of the product to move to Select Source Next change the input source For Series 5 users USB For Series 7 users Wireless Connection NOTE Wireless Connection is supported on Series 7 only 24 Using Smart Station Reins
68. omplete e Even if the USB cable is connected the PC screen will not be displayed on the monitor until the install is complete Installing device driver software USB 3 0 Monitor Searching preconfigured driver folders Close 21 Using Smart Station 3 Automatic installation may not be supported depending on your PC system settings If automatic installation does not work run Windows Explorer Open My Computer Removable media device drive and check the software Finally double click the software to proceed with installation Alternatively install using the software program on the provided CD e Install using Explorer A virtual installation driver will appear Double click the icon to install the program e It may take a while for the virtual driver to appear e Do not remove the cable or turn off the product until install is complete ee Organi Sitter paaparties Laina ae change a program Map netwed die Open Contant Pandi K NO We Fovanten a Hard Disk Drives 4 IG Desktop Local Onh C Local Ont lb Download oOo a i Recent Places z Local Disk Local Oi E L nen b d wo ot NA O Mae Devices with Removabie Storage 4 Pic eng OVO RW Come Gl BA rm on B Videos e ssi NG Computer i Ka Local Dst i ca Local Disk x Ka Local Dis fl ca Loca Du IP CO Dre 0 Samsung Sman Satin KEI Viasatin 0 Ne e Install using the CD Run the provided CD then selec
69. orking environment through the Wireless Connection feature e Insert a small wireless connection dongle to your PC The PC will automatically connect to your Smart Station monitor without the need of a cable e The Smart Station monitor automatically detects and connects to a notebook PC where the wireless connection dongle is inserted that is within range The screen will automatically turn off when the notebook PC is moved out of range 19 Using Smart Station Mobile Control Connect the Smart Station monitor to your PC and mobile device such as a smartphone You can control the mobile device using the keyboard and mouse connected to the PC This feature will allow you to use various services such as SNS more conveniently e Sharing a keyboard and mouse You can control both your mobile device and PC using a single keyboard and mouse e Inputting some languages using an external keyboard may not be possible depending on the mobile device To input a language including Korean that does not use the Latin alphabet download and install an application that supports multiple languages from Google Play Store Applications that support multiple languages can be found on the Samsung Electronics website http www samsung com NOTE e You can use three monitors by configuring the display settings e Wireless Connection is supported on Series 7 only e Mobile Control supports only mobile devices that have the USB Host func
70. our upper arms and level with the back of your hands GA IN e Keep your elbows at about a right angle e Adjust the height of the product so you can keep your knees bent at 90 degrees or more your heels attached to the floor and your arms lower than your heart Do not increase the volume too high when using headphones earphones L Sound particularly at a higher volume could potentially affect long term hearing 12 Chapter 2 Preparation Unpacki ng the Smart Stati on 2 Remove the styrofoam from the product The appearance of the actual product may differ from the images shown 1 Open the packaging box Be careful not to damage the product when you open the packaging with a sharp instrument 3 Check the product and remove the styrofoam and plastic bag e The appearance of the actual product may differ from the image shown e This image is for reference only 4 Store the box in a dry area so that it can be used when moving the product in the future 13 Preparation Checking the Components Contact the vendor where you purchased the product if any components are missing The appearance of the components and items sold separately may differ from the image shown Components NOTE Components may vary depending on the country Quick setup guide User manual o Cleaning cloth Warranty card Not available in some locations GB Power c
71. press the mouse wheel or the shortcut keys Alt S on the keyboard NOTE The shortcut keys can be customized in the custom settings window Refer to Changing the Settings page 40 After the software is installed the Mobile Control icon will appear on the far right side of the taskbar NOTE Charging Control Mode will be set as default You can then charge the connected device To move the mouse input and keyboard focus to a mobile device more quickly double click the Mobile Control icon on the right to activate Fast Control Mode NOTE In this mode movement of the mouse input and keyboard focus is faster but battery charging is not possible 36 Using Smart Station Connecting and Using Devices by Type Check the proper instructions for the device you will be using Mobile devices should be purchased separately Android smartphones When your mobile device has a Micro USB port Wired connection Wireless connection for Series 7 only NOTE Before connecting to your mobile device check that the Mobile Control icon is found on the far right side of the taskbar 1 Connect your Android smartphone to the Smart Station monitor using the mobile cable 2 After the connection is established Charging Control Mode will be set as default You can then charge your smartphon
72. quency 86 Vertical Frequency 87 Resolution 87 Plug amp Play 87 MHL Mobile High Definition Link Chapter 1 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics Microsoft and Windows are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of the Video Electronics Standards Association Ownership of all other trademarks is attributed to their due owner e An administration fee may be charged if either a an engineer is called out at your request and there is no defect in the product i e where you have failed to read this user manual b you bring the unit to a repair center and there is no defect in the product i e where you have failed to read this user manual The amount of such administration charge will be advised to you before any work or home visit is carried out Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation An internal temperature rise may cause fire and damage the product Be sure to allow the amount of space as shown below or great
73. r To find whether your device supports the host function contact the manufacturer NOTE e Mobile Control supports the keyboard and mouse function for mobile devices allowing the product to interact with a connected mobile device e For some mobile devices only a single function keyboard function etc from a range of functions of Mobile Control may be available To find whether your device supports the keyboard and mouse functions contact the manufacturer e Mobile Control supports only mobile devices that have the USB Host function Support for this feature depends on the specifications of your mobile device e Galaxy S2 is supported Galaxy products made by Sprint United States and AT amp T United States are not supported because they do not have the USB Host function Mobile Control activates the host function on a mobile device and shares data between devices To use Mobile Control properly you must use the provided mobile cable to connect your mobile device to the MOBILE port If using a standard USB cable the Mobile Control function will not be available Due to the structure of mobile devices the Micro USB port cannot transmit both the USB data and MHL signal at the same time Q amp A Ea How can I change the frequency How can I change the resolution Set the frequency on your graphics card e Windows XP Go to Control Panel Appearance and Themes Display Settings Advanced
74. rce Devi ce 3 Refer to the user manual for the source device when connecting it to the product The number and locations of ports can vary depending on the source device Check the following before you connect this product with other devices Do not connect the power cable until all connections are completed You can connect a camcorder audio player or DVD player to the product Connecting the power cable during connection may damage the product Note that the optimal performance can be achieved when the resolution of the source device Is Full HD 1080p Connecting the Powe SAMSUNG 1 Connect the power cable to the DC power adapter Next connect the adapter to the product 45 Connecting and Using a Source Device Connecting and Using a PC Connecting to a PC Select a connection method suitable for your PC Connecting parts may differ in different products Connection Using an HDMI DVI Cable MD m DVIOUT 1 Connect the HDMI port on the back of the product to the DVI port on the PC using the HDMI DVI cable 2 Connect the DC power adapter to the product and a power socket Next turn on the power switch on the PC 3 Press the button on the product to change the input source to HDMI NOTE e Open the SETUP amp RESET menu Next set PC AV Mode to PC e Audio is not available if the PC and product are connected via the HDMI DVI port e To use the USB Hub and Mobile Control fu
75. re quality suitable for editing documents and using Internet e Game Obtain a picture quality suitable for playing games that involve many graphic effects and dynamic movements e Cinema Obtain the brightness and sharpness of TVs suitable for viewing video and DVD content e Dynamic Contrast Obtain balanced brightness through automatic contrast adjustment NOTE SAMSUNG If you change the Brightness or Contrast setting when MAgicBright is set to Standard or Game mode the current mode will automatically change to Custom mode 51 Screen Setup In AV mode Adjust IE Enter e Dynamic This mode is suitable when the ambient light is bright e Standard This mode is generally suitable for any environment e Movie This mode reduces eye fatigue e Custom Customize the Contrast and Brightness settings SAMSUNG If you change the Brightness Contrast or Sharpness setting when MAgicBright is set to Dynamic Standard or Movie the current mode will automatically change to Custom mode 5 Press Av to move to the option you want and press T 6 The selected option will be applied SAMSUNG MAGIC Color MacicColor is a new picture quality improvement technology developed independently by Samsung Electronics It delivers vivid natural colors without picture quality degradation SAMSUNG Not available if MagicBright is in Cinema or Dynamic Contrast mode Configuring Mac ccolor 1 Press on the product 2
76. red the product Then contact Samsung Customer Service Center Product failure an electric shock or fire may result Do not place objects containing liquid vases pots bottles etc or metallic objects on top of the product Be sure to power off the product and disconnect the power cable when water or other foreign substances have entered the product Then contact Samsung Customer Service Center Product failure an electric shock or fire may result 10 Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels If you are not going to use the product for an extended period of time activate power saving mode or a moving picture screen saver Disconnect the power cable from the power socket when not using the product for an extended period of time vacation etc Dust accumulation combined with heat can cause a fire electric shock or electric leakage Use the product at the recommended resolution and frequency Your eyesight may deteriorate Do not put DC power adapters together Otherwise a fire may result Remove the plastic bag from the DC power adapter before you use it Otherwise a fire may result Do not let water enter the DC power adapter or get the adapter wet An electric shock or fire may result Avoid using th
77. ress the ill icon at the far right side of the taskbar to install Wireless Connection Manager 4 Run Wireless Connection Manager A list of monitors you can connect to will appear Double click or right click the desired monitor Next select Connect Wireless Connection Manager Connected Monitor There is no monitor connected Detected Monitor s EZ Monitor device 4141000001 Connect Rename You can set the desired monitor as the primary monitor Set as default Double click or right click the desired monitor Next select Set as default You can change the name of a monitor Double click or right click the desired monitor Next select Rename Auto Wireless Detection If Auto Wireless Detection mode is enabled the product will automatically connect or disconnect from the notebook PC when the notebook PC is moved closer or further away Make your wireless connection experience even more convenient through Auto Wireless Detection 1 Run Wireless Connection Manager 2 Right click on the monitor you want to connect to Next select Set as default 3 Press the Hub button on the product Next set Auto Wireless Detection to On 27 Using Smart Station Using the Wireless connection Dongle as a Hub Wireless Connection is supported on Series 7 only For details on how to use a USB cable as a hub refer to Using the Product as a USB Hub page 31 Connect various source devices periphera
78. river folders 5 Automatic installation may not be supported depending on your PC system settings HDMI OUT If automatic installation does not work run Windows Explorer Open My Computer i iia Dur Removable media device drive and check the software Finally double click the software to proceed with installation Alternatively install using the software program on the provided 2 Check that the output from the desktop PC is displayed on the monitor CD 3 Connect the USB cable provided in the package to a USB port when the HDMI cable is e Install using Explorer connected A virtual installation driver will appear Double click the icon to install the program NOTE e t may take a while for the virtual driver to appear e Do not remove the cable or turn off the product until install is complete Synem properties Unasi ex changa a progam Map natacek dive Open Cornet Panel K NO 3 4 Hard Disk Dri USB I J e HDMI IN HDMI OUT I a i NO KA 4 After the connection is established between the Smart Station monitor and PC using the USB cable the following software programs required to use the Wireless Connection USB Hub and Mobile Control functions will automatically install Wireless Connection Manager for Series 7 only USB Display Driver Ethernet Driver Mobile Control 23 Using Smart Station e Install using the CD If there is no sound output after adjusting the v
79. sing the USB 3 0 cable If the screen is blank connect your notebook PC using a USB 2 0 cable To connect to a PC using a USB cable 1 Connect the USB cable to the product and PC 2 Press the I button until the input source of the product changes to USB Alternatively press the Hub button and click Select Source USB 3 The product will display the PC screen when the connection is established Automatic Manual USB Cable Connection The input source may automatically change to USB if a connection is established between the product and PC via the USB cable If the input source does not change to USB automatically press the T button until the input source changes to USB Alternatively press the Hut button and click Select Source USB NOTE If a USB cable and the wireless connection dongle are connected at the same time the highest priority is given to the Wireless Connection The product cannot connect to multiple PCs wirelessly at the same time Wireless Connection is supported on Series 7 only 30 Using Smart Station Using the Product as a USB Hub For details on how to use the wireless connection dongle as a hub refer to Using the Wireless connection Dongle as a Hub page 28 Using the product as a hub connect and use various source devices with the product at the same time e A PC cannot connect to multiple source devices at the same time because there are a limited number of input output ports a
80. stomer s fault Product damage caused by customer s mishandling or wrong repair If a product damage is caused by e External impact or drop e Use of supplies or separatly sold product unspecified by Samsung e Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co Ltd e Remodeling or repairing the product by customer e Using it with incorrect voltage or non authorised electrical connections e Not following the cautions in User Manual Others e If product fails by natural disaster lightning fire earthquake flood damage etc e If consumable components are all used up Battery Toner Fluorescent lights Head Vibrator Lamp Filter Ribbon etc NOTE If customer requests a service in case the product has no defect service fee may be charged So please read User Manual first Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable
81. t the desired language Click SAMSUNG Smart Station to install the program manually e Loading the install file may take a while e Do not remove the cable or turn off the product until install is complete SyncMaster C24B550U C24B750X C27B750X a mn User Manual w Regulatory Compliance Statements x 4 After installation make the required connections and use the product as instructed below For Series 5 users Press the Hub button on the front of the product to change Select Source to USB Alternatively press the button to change the input source to USB For Series 7 users Disconnect the USB cable Next connect the wireless connection dongle to a USB port on the PC Press the Huk button on the front of the product to change Select Source to Wireless Connection Alternatively press the button to change the input source to Wireless Connection NOTE Wireless Connection is supported on Series 7 only 22 Using Smart Station Automatic installation when using a desktop NOTE PC e Do not remove the cable or turn off the product until install is complete e Even if the USB cable is connected the PC screen will not be displayed on the monitor until the 1 After opening the package connect the Smart Station monitor to your desktop PC using install is complete the HDMI cable provided in the package Installing device driver software USB 3 0 Monitor Searching preconfigured d
82. tall and Update 1 Reinstall If the provided USB cable is connected again after a software program is removed the removed program will be detected and a message will appear asking whether you want to reinstall the software To reinstall select Yes to proceed with installation 2 Software installation using the provided CD If automatic installation is not supported or you want to reinstall the software manually insert the provided CD into your PC and install In this case install the required software programs one after another 3 Update Ifthe provided CD is missing or the latest version driver is needed download the latest driver from www samsung com It is best to update your Smart Station monitor periodically to improve the performance Connecting a PC to the Smart Station Monitor Product To use the product you should connect it to a PC using the wireless connection dongle or USB cable You can listen to the sound by connecting an audio output device headphones etc to the Q port Audio is not supported when an HDMI DVI cable is used to connect the product to the PC Series 5 HDMI mode USB mode MHL mode Series 7 HDMI mode USB mode Wireless Connection mode MHL mode When the product connects to a PC for the first time the optimum resolution 1920 x 1080 will be selected automatically and the display will be set to extended mode From the next time the product connects to t
83. tion Support for this feature depends on the specifications of your mobile device e Galaxy S2 is supported Galaxy products made by Sprint United States and AT amp T United States are not supported because they do not have the USB Host function e To find if your mobile device supports USB Host contact the device manufacturer Read the Following before Using Read the Following before Using he Wireless Connection USB Hub Functions Ha To use the Wireless Connection USB Hub functions connect your PC to the Smart Station monitor using the wireless connection dongle or USB cable N The USB Display function enables both the display output and USB Hub to function with a single USB cable w Using the USB Hub function is not possible if only an HDMI or HDMI DVI cable is connected without a USB cable connected A Playing games usually requires a high resolution and fast response rate It is recommended to play games in HDMI mode connecting directly to a graphics card rather than using Wireless Connection or USB mode Playing games or videos is not supported while in Wireless Connection or USB mode on Windows XP or Vista u When the Wireless Connection or USB mode is used for the first time or the power saving mode is deactivated on the PC it may take a while for the Wireless Connection or USB mode to be detected o To use the USB Hub function when the Smart Station monitor is in USB mode where a US
84. tion Position of Other PC will be enabled and the position of the secondary PC can be changed You can set keyboard and mouse switching method Keyboard and mouse switching NOTE Tum On artes e Tf two PCs are connected to the product only the primary PC can be used to change the position of the secondary PC PRINERI e If two PCs are connected to the product the secondary PC cannot connect to a source device Use Mouse Middle Button through a USB cable or wireless connection Use Mouse Move Off The Edge of Screen Right side of this monitor Hotkey Toggle Altes o Ic 40 Using Smart Station To Transfer files between two PCs Desktop Note PC Using the Mobile device Holder Transfer files between two PCs such as a desktop PC and a notebook PC conveniently by You can use the mobile device holder provided in the package when connecting a mobile dragging and dropping the files device to the product Using the mouse buttons to work with a mobile device ak e Left button Select a menu e Right button Close the current menu go to the last menu e Middle button Perform two different functions according to the menu setting If Use Mouse Middle Button is enabled under Preference gt Switching Method the middle mouse button switches the input source between the PC and mobile device If Use Mouse Middle But
85. to MENU SETUP amp RESET and set Off Timer On Off to Off 68 Setup and Reset Reset Return all the settings for the product to the default factory settings Restoring the default settings Reset 1 Press II on the product 2 Move to SETUP amp RESET using the Ayv buttons Next press the button 3 Move to Reset using the A v buttons Next press the T button The following screen will appear Reset all settings 4 Press lt gt to move to the option you want and press Fey 5 The selected option will be applied 69 Chapter 10 INFORMATION Menu and Others INFORMATION View the current input source frequency and resolution 1 Press on the product 2 Move to INFORMATION using the A v buttons The current input source frequency and resolution will appear Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness or Contrast setting using the A v buttons in the initial screen where no OSD menu is displayed 1 Press A v when the initial screen is displayed The following screen will appear Brightness ee Contrast 5 O exit Adjust FF Enter 2 Press the Z7 button to alternate between the Brightness and Contrast settings 3 Adjust the Brightness or Contrast setting using the A v buttons 70 INFORMATION Menu and Others Configuring Volume in the Initial Adjust the Volume setting
86. ton is disabled under Preference gt Switching Method the middle mouse button functions as the MENU button for the connected mobile device e Scroll button Perform the general mouse scroll wheel function Note that this button is not available in an application that does not support the mouse scroll function Chapter 4 Using MHL mym e Since the display size of the product is larger than those of mobile devices the picture quality may MHL Mobile High Definition Link degrade e This product is officially MHL certified In the event of a problem with a mobile device connection contact the mobile device manufacturer e The picture quality may degrade when content imported from the mobile device with a low resolution is displayed on the product Connect a mobile device that supports MHL to the product and view videos and photos saved on the device using the product screen SAMSUNG lt 23 gt o e To use the MHL function you need an MHL certified mobile device You can check if your mobile device is MHL certified on the website of the device manufacturer To find a list of MHL certified devices visit the official MHL website http www mhlconsortium org e To use the MHL function the latest version of software must be installed on the mobile device e On some mobile devices the MHL function may not be available depending on the device performa
87. using the lt gt buttons in the initial screen where no OSD menu is displayed 1 Press lt gt when the initial screen is displayed The following screen will appear Volume Bol OO Exit lt gt Adjust E Enter 2 Adjust the Volume setting using the lt gt buttons NOTE The speaker function is available on Series 7 only To listen to the sound on Series 5 connect an audio output device headphones etc Configuring HUB in the Initial Screen Press the Hu button on the stand when no OSD menu is displayed The HUB menu window will be displayed 1 Press Hub when the initial screen is displayed You can change the Auto Wireless Detection USB Super Charging and Select Source settings or view the Wireless ID 2 Configure the settings as required using the A v buttons e Refer to HUB for further details on how to use the HUB function e The Auto Wireless Detection and Wireless ID functions are supported on Series 7 only 71 Chapter 11 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Cente Before calling Samsung Customer Service Center test your product as follows If the problem persists contact Samsung Customer Service Center Testing the Product Check if your product is operating normally by using the product test function If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC perform a
88. ust around the pins of the power cable or the power outlet using a dry cloth A fire may result Do not disconnect the power cable while the product is being used The product may become damaged by an electric shock Only use the power cable provided with your product by Samsung Do not use the power cord with other products A fire or electric shock may result Keep the power socket where the power cable is connected unobstructed In the event of a problem with the product you must disconnect the power cable to cut the power supply to the product Hold the plug when disconnecting the power cable from the power socket A fire or electric shock may result Installation and Safety The following images are for reference only Real life situations may differ from what is shown in the images Warning DO NOT PLACE CANDLELS INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES NA A A fire may resullt apos Do not install the product in poorly ventilated spaces such as a bookcase or UNC closet An increased internal temperature may cause a fire Keep the plastic packaging out of the reach of children Children may suffocate Do not install the product on an unstable or vibrating surface insecure shelf sloped surface etc The product may fall and become damaged an
89. vailable The HUB feature of the product will improve your work efficiency by allowing you to connect source devices peripherals etc to the USB ports on the product without the need to connect them to a PC e If source devices are connected to the PC the numerous cables around the PC can get tangled and look messy Connecting them directly to the product will resolve this e Connect a mobile device such as an MP3 player or smartphone to the product when connected to a PC This allows you to control the device from the PC or charge the device battery NOTE e To detect and start a source device faster connect the device to the blue USB 3 0 port on the product e An external mass storage HDD requires an external power supply Be sure to connect it to a power source e High speed charging is possible using the ss 1 port only This port allows you to charge a mobile device twice as fast compared to when charging using a standard USB port e Battery charging is possible in power saving mode However it is not possible when the product is powered off e Battery charging is not possible if the power cable is disconnected from the power socket e Mobile devices should be purchased separately s54 PC IN MOBILE sai Se 2 pea Q 31 Using Smart Station LAN Connection Wired The Smart Station function allows you to access the Internet from your PC by connecting the LAN cable to the product when
90. vel adjust the volume on your PC sound card or software program SOLUTIONS The upper part of the stand may become slightly hot at room temperature This occurs as the heat inside the stand releases naturally The intensity of heat you feel can vary depending on whether the room is sealed or depending on the surrounding temperature This does not indicate a defect You can use the product without worry It is recommended to use the product in a location that offers good ventilation at the back of the monitor stand 73 Troubleshooting Guide roubleshooting Guide The Wireless Connection screen for Series Symptom Wireless Connection does not work although the product is powered on 1 Press the I button on the product to check the input source 2 Check the connection of the wireless connection dongle 3 Check the connection of the product 4 Check the driver and update status Press the I button to check that the input source is set to Wireless Connection If the input source is not set to Wireless Connection press the TS button to configure the input source Check that the dongle is properly connected Run Wireless Connection Manager Next press the shortcut keys Ctrl P Q to check that Host Enabled is displayed at the bottom left Run Wireless Connection Manager to check if the product is found in the list of monitors If the product is found select Connect and check if it is connected
91. wer indicator will be lit when the product is operating normally NOTE e For details on the power saving function refer to Power saving Function in the product specifications e To reduce power consumption it is best to remove the power cable when not using the product for an extended period of time Confirm a menu selection If you press the E button when a menu screen is not displayed the input source will be changed Series 5 HDMI USB MHL Series 7 HDMI USB Wireless Connection MHL NOTE A message that shows the current input source will appear at the top left corner of the screen each time you turn on the power or press the PE button to change the input source DESCRI PTION Move to the upper or lower menu or adjust the value for an option on the OSD menu Adjust the Brightness Contrast using the v buttons when the initial screen that displays no menu screen is displayed Move to the left or right menu or adjust the value for an option on the OSD menu Adjust the Volume using the lt gt buttons when the initial screen that displays no menu screen is displayed 16 Preparation Rear View The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality SAMSUNG HDMIIN LAN ss lt PC IN DC 14v A o poms sour ons HDMI IN Connect to a source dev
92. work LAN9512 LAN 514 USB 2 0 to Ethernet 10 100 Adapter 7 5 Local Ares Cannactian a inbe w Check that Obtain an IP address automatically is selected for the network device of the Smart Station monitor in the network properties NOTE To check that the network device of the Smart Station monitor is set to obtain an IP address automatically go to Control Panel Network and Internet Network and Sharing Center gt Change adapter settings Select the Smart Station monitor network device displayed as LAN9512 LAN9514 USB 2 0 to Ethernet 10 100 Adapter Right click on your mouse gt Select Properties Select Internet Protocol Version 4 TCP Pv4 Select Properties To configure the IP address private or official on your PC someone usually a server mus allocate an IP address to the PC An external IP address is allocated to you by your Internet service provider An internal IP address is allocated to you by your Internet router You can select whether to configure the IP address on the PC automatically or manually The static IP address mode is used to manually enter an IP address The static IP address mode is suitable if the IP address for the PC should not be changed such as for a file sharing server and generally is not used except under such special circumstances When using the LAN network of the Smart Station monitor or PC ensure you connect the LAN cable to only one of the two networks
93. ww samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com Responsibility for the Pay Service Cost to Customers NOTE When the service is requested in spite of in warranty we may charge you for a visit from a service technician in the following cases Not a product defect Cleaning of the product Adjustment Explanation Re installation and etc e If a service technician gives instructions on how to use product or simply adjusts options without disassembling product e If a defect is caused by external environmental factors Internet Antenna Wired Signal etc e If a product is reinstalled or devices are connected additionally after installing the purchased product for the first time e fa product is reinstalled to move to a different spot or to move to a different house e If customer requests instructions on how to use because of another company s product e If customer requests instructions on how to use the network or another company s program e f customer requests software installation and setup for the product e If a service technician removes cleans dusts or foreign materials inside of the product e f customer requests an installation additionally after purchasing a product through home shopping or online 84 Appendix A Product damage caused by cu
94. www samsung com ch_fr French http www samsung com ARMENIA AZERBAIJAN BELARUS GEORGIA KAZAKHSTAN KYRGYZSTAN MOLDOVA MONGOLIA RUSSIA TADJIKISTAN UKRAI NE UZBEKISTAN 0 800 05 555 088 55 55 555 810 800 500 55 500 0 800 555 555 8 10 800 500 55 500 GSM 7799 00 800 500 55 500 0 800 614 40 7 800 555 55 55 8 800 555 55 55 8 10 800 500 55 500 0 800 502 000 8 10 800 500 55 500 http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com http www samsung com ua Ukrainian http www samsung com ua_ru Russian http www samsung com 82 Appendix AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE TAIWAN THAILAND VIETNAM 1300 362 603 400 810 5858 852 3698 4698 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 0800 112 8888 021 5699 7777 0120 327 527 1800 88 9999 0800 SAMSUNG 0800 726 786 1 800 10 SAMSUNG 726 7864 for PLDT 1 800 3 SAMSUNG 726 7864 for Digitel 1 800 8 SAMSUNG 726 7864 for Globe 02 5805777 1800 SAMSUNG 726 7864 0800 329 999 0266 026 066 1800 29 3232 02 689 3232 1 800 588 889 http www samsung com http www samsung com http www samsung com hk Chinese http www samsung com
95. xtreme temperatures or an airport or train station where the product should operate continuously for an extended period of time may seriously affect its performance Be sure to consult Samsung Customer Service Center if you want to install the product at such a place Operation and Safety The following images are for reference only Real life situations may differ from what is shown in the images Warning Ea GE There is a high voltage inside the product Never disassemble repair or modify the product yourself A fire or electric shock may result Contact Samsung Customer Service Center for repairs Before moving the product turn off the power switch and disconnect the power cable and all other connected cables Damage to the cord may result in a fire or electric shock If the product generates abnormal sounds a burning smell or smoke disconnect the power cable immediately and contact Samsung Customer Service Center An electric shock or fire may result Do not let children hang from the product or climb on top of it Children may become injured or seriously harmed Before Using the Product If the product is dropped or the outer case is damaged turn off the power switch and disconnect the power cable Then contact Samsung Customer Service Center Continued use can result in a fire or electric shock

User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents