User manual CuroCell® Neo CX13 CuroCell
Contents
1. button WARNING If the air pressure remains low check the mattress and tubes for damage Repair if necessary or contact the manufacturer or your local dealer for help 4 6 CPR In case of an emergency where CPR cardiopulmonary resuscitation is necessary Rapidly pull the CPR band on the tubes between the pump and the mattress Remove the tube connections on the side of the pump for even faster deflation NOTE Make sure that the CPR connector is properly connected after use 4 7 Transport function If the patient must be moved in the bed the tubes can be connected together detached from the pump and the mattress put in transport mode This mode should only be used for short periods of time 10 4 8 Heel function with check valves option This feature allows pressure relief of the heels Disconnect the air cell which is directly under the heel This air cell will then be emptied for air Press the bottom 1 and disconnect the plug Let the cell remain in its place in the mattress The air cell is activated by assembling the connection again 5 Cleaning and reconditioning It is important to follow the instructions below before using the product for another user Consult the hygiene responsible or the supplier for help and instructions when unsure 5 1 Cleaning PUMP P WARNING Do not open the pump housing risk of electric shock Service and maintenance must be performed by authorised2. Care of sweden Supporting Life User manual 2015 03 10 CuroCell Neo CX13 CuroCell Neo CX19 Alternating pressure mattress Item number user manual 95 001297 f IIA Contents Important safety precautions Introduction Product description Assembly Installation Start up Cleaning and reconditioning Storage Maintenance Troubleshooting Technical description Spare parts Options and accessories Warranty Other information oO won A WW 11 12 13 14 15 17 18 19 19 IMPORTANT SAFETY PRECAUTIONS Read all instructions prior to use ee ee ee eee ee ee ee ee ee ee eee ee ee ee eee ee WARNING To minimise the risk of fire electric shocks or bodily injury 1 The product must only be used for its intended purpose as described in this manual The product may not be combined assembled or repaired with other parts e g pump and mattress accessories or spare parts other than those described in this manual or other documentation from Care of Sweden 2 Do not use the pump in wet rooms or where there is a risk of the pump coming into contact with water or another liquid Never handle a pump that has come into contact with water liquid Pull the plug out of the electrical socket immediately and send the product to an authorised service technician for servicing 3 DO NOT USE in the vicinity of or in contact with fire sources hot surfaces such as fire burning cigarettes or hot lamps Although the product has underg
3. as air flow alternates between the cells for a set cycle period depending on the designated cycle period one cycle varies from 10 to 25 minutes depending on the setting used Pump is noisy Check how the pump is hung on the bed Resonance can occur vibrations are felt in parts of the bed Remove the pump and listen whether this makes a difference Can be resolved by putting the pump ona flat steady surface or by placing a towel between the pump and bed If your questions are not answered by the above information please contact Care of Sweden or your local dealer for further assistance 14 9 Technical description 9 1 Technical specification PUMP SPECIFICATION Model Croce VARA Voltage Tf O 5060h S Power consumption OFA Typeoffuse THAR SOV Cycle periods Variable 10 15 200r 25min Dimension LxWxH 29K 2OKUFeM o Weist S l See O M E oo Shippings oe Po Humidity O Operation 10 90 non condensing ee ee Storage 10 90 non condensing Classification lassi Typ BF Pad MATTRESS SPECIFICATION Model f CuroCell Neo CX13 CX19 O S Dimension WxLxH 80 85 90 105 120 cm x 200 210 x 13 19cm_ NOTE Care of Sweden retains the right to modify the product specification at any time WARNING Follow operating and maintenance instructions carefully to prevent injury as well as damage to the product or other equipment 9 2 Labelling The mattress is labelled with product name production
4. date article number size care and wash instructions EAN bar code as well as space for own labelling The product also displays which side is up down and head foot 15 9 3 Symbol Definitions Article No Manufacturer GROY LINNA x OLN 7 S Yuna Read the user manual Group of function Br Not in domestic refuse follow recycling instructions LJ Place on top of existing mattress Recommended user weight when using Evac function X g Do not wash Machine wash at 70 C Tumble dry Do not tumble dry X Do not dry clean Wipe off IP__ IP class Ingress Protection Rating Temperature range 16 XXXX XX XX Year Month Day CE CE marked acc to MDD 93 42 EEC Category Patient information category Counteract shear force Machine wash at 95 C Class Il equipment Double Insulated i The mattress should only be used lying in the lengthwise direction on the mattress sane on Foot placement ye Y a Recycling Directly on bed base i Heel function lt 1 Chlorine X Do not iron Type BF 10 Spare parts CuroCell Neo CX13 Size 80x200 cm 80x210 cm 85x200 cm 85x210 cm 90x200 cm 90x210 cm 105x200 cm 105x210 cm 120x200 cm 120x210 cm Cover Olivia 295 080200 295 080210 295 085200 295 085210 295 090200 295 090210 295 105200 295 105210 295 120200 295 120210 Inner cov
5. panel 2 Air starts to inflate the mattress It takes at least 20 minutes until the mattress is inflated Note The pump always starts in the Autofirm mode 3 If necessary the patient can lie on the mattress even when not inflated in this case the underlay will carry the load When using a mattress with an air underlay this must be inflated 4 The light for Low pressure is lit until the mattress has reached the set pressure When the light goes out the system changes mode to previous settings and the mattress are ready to be used 4 2 Program selection There are four different programs Please refer to section 2 3 for more details As a standard setting we recommend an alternating mode and a 10 minute cycle time 4 3 Comfort setting kg aaa kg 0 30 1 80 90 6 The air pressure in the mattress can be adjusted 40 2 100 110 7 according to the patient s desire for comfort 50 3 120 130 8 Always consult the prescriber or other authorised 60 4 140 150 9 personnel for the appropriate setting 70 5 150 160 10 Note The pump always starts in the Autofirm mode When the mattress has reached the required pressure the pump is set automatically to the previously used setting or to the settings made in the Autofirm program Please refer to section 2 3 for more details The mattress is now ready for use P NOTE e Werecommend the Seat inflation mode for all situations where the head of the bed is raised e When only part
6. the alternating pressure principle a technique that is well proven and been used for a long time Alternating pressure is when the pressure regularly alternates between the mattress cells to replicate body movement Variable pressure cycles are set up where there is little or no pressure This is optimal for skin improvement or to prevent skin damage l Cg Always read the user manual prior to use 1 1 General information This system is a medical device with CE marking in accordance with MDD 93 42 EEC According to statutory regulations made by the authorities regarding medical devices the manufacturer is required to report all accidents or incidents involving their products We would be very grateful for all information involving accidents or incidents relating to our products by reporting them immediately to us here at Care of Sweden The system has been tested and approved according to the following standards IEC 600601 1 IEC 60601 1 2 SS EN ISO 12182 SS EN ISO 14971 SS EN ISO 10993 EN 597 1 EN 597 2 EN 14126 1 2 Intended use CuroCell Neo CX is an alternating pressure mattress that can be used in all kinds of health care environments to prevent pressure ulcers as well as treatment up to and including category 4 pressure ulcers It is available in two versions as an overlay CuroCell Neo CX13 or as a mattress replacement CuroCell Neo CX19 The mattress is meant for use for persons of arecommended minimum lenght of 1
7. 20 cm The recommended user weight is up to 160 kg i We recommend that position changes are made regularly The time interval must be evaluated by the responsibel personnel depending on the patient s status diagnosis and general condition The mattress should only be used lying in the lengthwise direction on the mattress with the feet at the end marked with the feet symbol The mattress must always be cleaned between patients NOTE e For certain patients such as amputees are the recommended minimum weight not valid These users may however have other requirements as the entire mattress is not being loaded Please refer to sections 4 2 and 4 3 for operating control e When used together with positioning pillows read the user s manual carefully to ensure correct positioning of the patient e If you are using this product with an evacuation sheet it is the user s responsibility to ensure that it is safe to use for evacuation e Be careful when using bed rails or other protection on the bed so that the mattress does not become trapped or damaged e The mattress must not be lifted with a person lying on it or used for any other type of transport other than a possible evacuation using an evacuation sheet e This mattress is unsuitable for use during x ray examinations because of the risk of blurred images or artefacts that may lead to diagnostic errors 1 National Pressure Ulcer Advisory Panel European Pressure
8. Guidelines based on user weight is given in the table on the pump NOTE In all uses where the head end of the bed is raised the pressure must be increased at least one 1 step 2 CYCLE TIME There are four selectable cycle times Press the button to select cycle time 3 PROGRAM THERAPY Change the mode by pressing the button the chosen mode is indicated by the green light The modes order is Autofirm Alternate Static Alternate seat inflation Static seat inflation A Autofirm Autofirm is used to fill the mattress completely with air for firm support The pump always starts in this mode When the correct pressure is reached it changes automatically to the previous setting or to the presetting outlined below Presetting features for Autofirm process 1 Program Therapy Select the required program 2 Comfort setting Set the required air pressure 1 10 3 Cycle time Select from 10 15 20 or 25 minutes Note The preset Cycle Time Comfort Level and Therapy mode will be illuminated to indicate the settings during the Autofirm process Autofirm LED is also illuminated After mattress is inflated Autofirm LED will be turned off automatically B Alternate In this mode the pressure alternates between the cells and there are four different cycle times to choose from C Static When Static is chosen the alternating process is terminated and the pressure between the cells evens out The function can be used in ass
9. Ulcer Advisory Panel and Pan Pacific Pressure Injury Alliance Prevention and Treatment of Pressure Ulcers Quick Reference Guide Emily Haesler Ed Cambridge Media Osborne Park Western Australia 2014 1 3 Other information Action plan Pressure ulcers To achieve the best possible result for this product it is recommended that a well planned and well structured working environment be used In our guideline Action plan you will find examples which can be applied and put into practice when using our products Mattress guide This practical guide gives you as a care giver help in choosing the correct mattress from the Care of Swedens range CuroCell Neo CX13 CX19 are mattresses in function group C This information can be found on our website www careofsweden com or you can order a copy from our Customer services by sending your details to info careofsweden se 2 Product description 2 1 Pump and mattress _ 1 CPR rapid deflation 2 Pump 3 Mattress 4 Pump connector Tubing system 3 static head cells If the product is fitted with ventilated cells they are located here 9 cells Front Back 1 Quick connector unit air 1 Off On 0 1 4 Air filter 2 Control panel 2 Power cord connection 5 Bed hooks 3 Fuses 2 pcs 2 3 Pump functions control panel 2 4 Comte L a 1 a Theia PT S 1 COMFORT SETTING Suitable air pressure is set with the comfort dial 1 8
10. aged In the event of damage contact the manufacturer or your local dealer before using the product 1 Place the mattress on top of an existing mattress and fasten it with the elastic bands around the underlying mattress If the mattress has a built in foam pad CuroCell Neo CX19 it can be placed directly on the bed frame Fix the mattress to the gt bed frame using the bands on the cover Note e Make the bed with sheets for added comfort e Check that the CPR valve is closed e Check the cells and snaps to make sure that they have been attached correctly 2 Hang the pump at the foot end of the bed or place it on a flat steady surface Route the power cord so that there is no risk of it causing someone to trip being run over by the bed wheels or getting crushed when the bed is raised or lowered If a cable holder is used optional open the snaps position the power cord in the pocket and close the snaps 3 Connect the tubes from the mattress to the side of J the pump There is an audible click sound when off the connectors are properly attached 4 Check that the power switch at the side of the gt Wat pump is set to O off Connect the plug to an AA approved electrical socket 220 240 V 4 Operation Note Always read the user manual prior to use 4 1 Start up 1 Set the power switch on the side of the pump to 1 On and start the pump by pressing the power button on the front
11. ample heavy immobile patients Cable holder NOTE This option is only available with new orders 11 2 Accessories Art no Product info CC 900220 Heel function with release valve 4 cells CC 900222 Heel function with release valve 3 cells 58 900902 Sturdy transport bag 11 3 Other accessories To ensure the best level of comfort we recommend use of accessories from Care of Sweden since our products are designed to work well together Please contact Care of Sweden or your local dealer for accessories or more information on our products 18 12 Warranty 12 1 Scope This CuroCell system is covered by a 2 year warranty for manufacturing defects The warranty does not apply to normal wear and tear or product impairment or damage stemming from negligence or improper handling care 12 2 Service and repairs This CuroCell mattress is a medical device in accordance with MDD 93 42 EEC that is used as an aid in preventing and treating pressure ulcers For this reason we recommend that the pump be regularly serviced and inspected to maintain functionality and performance Like other technical devices a pump that is properly cared for works better and lasts longer Service and maintenance must always be performed by Care of Sweden or one of its authorised technicians Only use spare parts that have been approved by Care of Sweden Use of non approved spare parts invalidate the warranty A warranty claim must be submitted to Ca
12. d CuroCell are trademarks of Care of Sweden AB Care of Sweden AB 2015 20
13. er CuroCell CC 928510 CC 928511 CC 928512 CC 928513 CC 928514 CC 928515 CC 928516 CC 928517 CC 928518 CC 928519 CuroCell Neo CX19 Cover grey Size Top part Olivia Bottom part CuroCell Inner cover 80x200 cm CC 906010 CC 905610 CC 928610 85x200 cm CC 906012 CC 905612 CC 928612 90x200 cm CC 906014 CC 905614 CC 928614 CuroCell Neo CX19 Cover Steel Size Top part Steel Bottom part CuroCell 85x200 cm CC 925553 CC 905612 90x200 cm CC 925555 CC 905614 Art no Description Size CC 901001 Air cell PU 80x13 cm CC 901002 Air cell PU 85x13 cm CC 901003 Air cell PU 90x13 cm CC 901004 Air cell PU 105x13 cm CC 901005 Air cell PU 120x13 cm CC 8217 Fuse set of 2 CC 8202 Filter disposable If other spare parts are needed please contact Care of Sweden or your local dealer for further assistance 17 11 Options and accessories 11 1 Optionals Comfort fabric only CuroCell Neo CX19 For patients who are sensitive for the fluctations in the mattress a padded inner cover can be placed over the air cells to increase comfort Heel section Options available to relieve sensitive heels Emptying the air cell with release valve NOTE These options are only availiable with new orders Sturdy transport bag Transport and storage bag Ventilated cells Low Air Loss Micro ventilation in 9 of the cells Covers With welded seams Lf low friction top part Top part with increased sliding function can be used for ex
14. es with a screwdriver Pull out the fuse holder 3 Fit a new fuse of the same type T1AL 250 V and screw the protective cover back in place There are two fuses 1 Unscrew the round safety plate on the back of the pump 2 Lean the pump backwards in order for the filter to fall out from the holder 3 Place the new filter in the filter holder and replace the safety plate If the pump is used in a dirty environment the filter should be checked regularly 13 8 Troubleshooting Problem Solution Pump does not start Check that the power cord is connected to the power socket Check the fuses Alarm is on Check that the quick connectors to air tubes on the pump side mattress looses air of the pump are properly connected Check that the CPR valve is closed Open the mattress and check for leaks from air cells or tubes Check that all tube connectors are properly fitted and connected No air in head cells When the mattress is inflated the 3 static head cells are filled last Patient is bottoming The comfort setting may be set incorrectly Increase the falls through pressure and wait a few minutes Do a Hand check Check the mattress as described in the section Alarm is on above Read more in sections 4 3 and 4 4 Check that the CPR valve is closed Mattress moves around Check that the air mattress is secured to the underlying mattress with the elastic bands Some cells have less air This is normal
15. ociation with patient care repositioning transferring in and out of bed The function is turned off by pressing the button again or it will automatically go back to alternating mode after 20 minutes D Seat inflation This mode gives extra support when sitting up and can be set for both alternating and static mode 4 PANEL LOCK Press down the Panel lock button for about 2 seconds to lock or unlock the panel 5 ALARM MUTE Press the ALARM MUTE button to temporary turn off the alarm Should the situation not be resolved within 5 minutes the alarm will be activated again Please refer to section 8 to troubleshoot any problems with the alarm A Power failure alarm During a power failure both the sound and light alarm will go on Turn it off by pressing the ALARM MUTE button B Low pressure alarm When the low pressure light is on the pressure in the mattress is below normal Both the light and sound alarm will activate The alarm will sound until the ALARM MUTE button is pressed If the problem remains see chapter 8 for trouble shooting 6 SERVICE This light indicates a technical failure in the pump First check that the air filter is clean and that the pump is not covered by anything such as a pillow or a blanket If the problem remains please contact the manufacturer or your local dealer for further information 7 POWER Power on off 3 Assembly Installation When unpacking the mattress check that none of the parts are dam
16. one fire testing it could become damaged if it comes into contact with fire sources 4 Position and use the product in a manner that prevents it from becoming trapped or damaged NOTE Be particularly aware of trapping damage when using bed rails 5 Never use the product if the pump power cord or plug is defective the pump casing is damaged or it is not functioning properly Contact a service technician for examination and repair 6 Regularly check product functionality through a hand check see section 4 4 Also check that the comfort setting is correct as indicated in the table on the pump 7 Continual monitoring is required when the product is used for individuals needing special supervision such as children 8 The mattress are protected with a hygiene cover Please try to avoid the simultaneous use of multiple hygiene covers with this mattress Because of the risk that the vapour permeability can be destroyed 9 The hygiene cover does not allow liquid or air to penetrate but is vapour permeable Make sure that the patient is positioned correctly to avoid the risk of suffocation 10 Prevent damage to the hygiene cover from sharp objects 11 If the covers are supplied with handles on the long sides theses handles are only to be used for lifting and moving the mattress itself All other use will be at your own responsibility and is not covered by the product warranty 1 Introduction CuroCell air mattresses operate according to
17. pe off and disinfect the cells all tubes and the CPR valve with a mild cleaning solution for this purpose such as alcohol with or without tensides Isopropranol 70 oxidating solutions or Chlorine max 1 5 Wipe off and disinfect all the work surfaces with an alcohol based cleaning agent intended for this purpose 6 Put the mattress together If cells for any reason have loosened from the tubes these must be replaced according to drawing in chapter 2 1 NOTE Check the hygiene cover each time the product is cleaned If damaged it must be replaced or repaired Also check the pump tube connectors and power cord during cleaning Damaged parts must be replaced or repaired 6 Storage The mattress and pump are best stored in the product bag optional extra Handle the packed product with care Do not put anything heavy on top otf it 12 7 Maintenance 7 1 General 1 Check the power cord and plug for damage and scratches 2 Check that the mattress cover is intact and that the cover and air cells are correctly assembled 3 Check that the air flow alternates between each outlet on the side of the pump 4 Check for damaged or pinched tubes and connectors Contact the manufacturer or your local dealer for spare parts 7 2 Changing fuses gt E D yN o 7 3 Changing the air filter m a yy yri D 1 Pull the plug out of the electrical socket before replacing fuses 2 Remove the cover from the fus
18. re of Sweden before the product is returned Please contact Care of Sweden or your local dealer if you have questions regarding warranty and service 12 3 Life expectance This product s expected life is estimated to be 5 years 13 Other information 13 1 Disassembly and recycling Except for certain parts of the pumps energy recovery is possible for almost all material in CuroCell products through incineration in waste incineration facilities Pump A used CuroCell pump must not be disassembled It must instead be taken to a recycling centre and sorted as electronic waste Mattress A used CuroCell mattress must be taken to a recycling centre and sorted as combustible waste For more information please contact Care of Sweden or your local dealer 13 2 Returns and complaints Complaints are to be reported to the supplier Return of a product shall follow the supplier s instructions and can only be done after the complaint has been reported Damages due to the transportation should be reported to the transportation agent 19 i Manufactured by Care of sweden Supporting Life Contact Phone 46 771106600 Fax 46 325 12840 Email info careofsweden se Internet www careofsweden com Address Care of Sweden AB P O Box 146 SE 514 23 Tranemo SWEDEN Visit address Fabriksgatan 5A SE 514 33 Tranemo SWEDEN Cargo address Byns vag 4A SE 514 33 Tranemo SWEDEN Supplied by Care of Sweden an
19. s of the mattress are under load e g if the patient is an amputee the pressure should be increased 1 or 2 levels e Always check the set pressure with a hand check see 4 4 for more information e Recommended user weight up to 160 kg 4 4 Hand check checking the pressure setting Hand check is used to ensure that the mattress is properly inflated This should be done regularly once per shift after changing the position in the bed or changing the comfort settings Open the cover Place a flat hand under the air cells directly underneath the user s pelvic region and make sure that the user does not lay directly on the underlying mattress There should be about 1 2 fingers margin If you can feel the user s body resting on your hand you need to increase the comfort settings to next highest step Wait 10 minutes and perform a new hand check 4 5 Alarm When the pressure drops to an abnormally low level the Low Pressure diode lights up together with an audio alarm Please refer to section 8 for troubleshooting The alarm is deactivated by pressing the ALARM MUTE button on the pump s control panel If the problem is not resolved within 5 minutes the alarm will start again The diode remains on until the pressure level is remedied and reset The pump is also fitted with a Power Failure alarm An alarm sounds and flashes when the pump is disconnected from the electric power Turn off the alarm by pressing the ALARM MUTE
20. technicians Do not get the pump wet or submerge it in any liquid z E z Gi z E z Gi a Wipe off the pump with a damp cloth and mild cleaning solution for this purpose such as alcohol with or without tensides Isopropanol 70 oxidating solutions or Chlorine max 1 If using a different agent choose one that does not affect the plastic of the pump housing MATTRESS COVER Covers can be wiped off with a mild cleaning solution for this purpose such as alcohol with or without tensides Isopropanol 70 oxidating solutions or Chlorine max 1 87 O u Bat BS Multi layer covers should be divided before washing Wash with like colors Chlorine and phenol based cleaners could have a negative impact on the PU surface x19 and should be avoided If chlorine is used we recommend a mixture of max 1 11 INNER COVER AND DISTANCE FABRIC accessories Ts O Ill x BS Clean the affected area with a mild cleaning solution for this purpose such as alcohol with or without tensides Ilsopropanol 70 oxidating solutions or chlorine max 1 5 2 Reconditioning PUMP See section 5 1 for instructions MATTRESS 1 Disconnect the tubes and let the air out also open the CPR valve 2 Remove the cover See instructions in chapter 5 1 for cleaning covers If the product is equipped with a foam core this should be removed and cleaned separately 3 Move the mattress to a clean area which is suitable for cleaning 4 Wi
Download Pdf Manuals
Related Search