User Manual - Trade Connect
Contents
1. Make sure that there are no residues of food or soil in or around the edge of the sump Put back in place the flat filter C Make sure that it is correctly positioned under the 2 guides Reassemble the filters A and B Put back the filter A in the flat filter C Turn it clockwise until it locks i An incorrect position of the filters can cause bad washing results and damage to the appliance 11 Cleaning the spray arms Internal cleaning Do not remove the spray arms If the holes in the spray e Carefully clean the appliance including the rubber arms are clogged remove remaining parts of soil with a gasket of the door with a soft moist cloth thin pointed object e If you regularly use short duration program these can leave deposits of grease and limescale inside External cleaning the appliance To prevent this we recommend to e Clean the appliance with a moist soft cloth le duration program at least 2 times per e Only use neutral detergents Do not use abrasive products abrasive cleaning pads or solvents Troubleshooting If the appliance does not start or it stops during With some problems the display shows an alarm operation Before you contact an Authorised Service code Centre check if you can solve the problem by yourself with the help of the information in the table Problem and alarm code Possible solution You cannot activate the appliance e Make sure that the mains plug is connected to2. Programs Program Degree of soil Type of load Program phases Consumption values 1 Duration min ECO 2 Normal soil e Prewash 128 0 75 10 3 Crockery and Wash 50 C cutlery e Rinses Dry A T 3 All Prewash 40 150 0 6 1 4 7 12 U o Crockery cut Wash from 45 C lery pots and to 70 C pans e Rinses Dry da Heavy soil Prewash 130 150 1 3 1 5 13 15 Crockery cut Wash 70 C lery pots and Rinses pans o Dw God Fresh soil Wash 60 C 30 0 9 9 Crockery and Rinse cutlery my 5 All Prewash 14 0 1 4 1 The pressure and the temperature of the water the variations of the mains supply the options and the quantity of dishes can change the values 2 With this program you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil This is the standard program for test institutes 3 The appliance senses the degree of soil and the quantity of items in the baskets It automatically adjusts the temperature and the quantity of the water the energy consumption and the program duration 4 With this program you can wash a partial load with fresh soil It gives good washing results in a short time It is not recom mended to use detergent tablets in the Quick 30 program 5 Use this program to quickly rinse the dishes This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance Do not use detergent with this pro
3. ECO AUTO and E start to flash 3 Press ECO AUTO and amp go off ECO continues to flash The display shows the current setting of the rinse aid dispenser 0 d rinse aid dispenser deactivated d rinse aid dispenser activated 4 Press ECO to change the setting 5 Press on off button to deactivate the appliance and to confirm the setting Before first use 1 Fill the rinse aid dispenser 2 Open the water tap 3 Start a program to remove any processing residuals that can still be inside the appliance Do not use detergent and do not load the baskets Adding rinse aid The rinse aid helps to dry the dishes without streaks and stains It is automatically released during the hot rinse phase Daily use 1 Open the water tap e Ifthe rinse aid indicator is on fill the rinse aid 2 Set the correct program for the type of load and the dispenser degree of soil 3 Load the baskets Make sure that the appliance is in Program selection 4 Add the detergent If you use multi tablets activate mode the option Multi Tab 5 Start the program Adding detergent Ifthe program has a prewash phase put a small quantity of detergent also in compartment B Adding multi tablets The Auto Off function This function decreases energy consumption by deactivating automatically the appliance when it is not operating The function comes into operation 5 minutes after the completi
4. aid selec ers on glasses and dishes tor to a lower position The quantity of detergent is too much There are stains and dry water drops The released quantity of rinse aid is not sufficient Adjust the rinse aid on glasses and dishes selector to a higher position The quality of the rinse aid can be the cause The dishes are wet The program does not have a drying phase or has a drying phase with low temperature The rinse aid dispenser is empty The quality of the rinse aid can be the cause The quality of the multi tablets can be the cause Try a different brand or activate the rinse aid dispenser and use rinse aid and multi tablets together Refer to Hints and tips for other possible causes Technical information Dimensions Width height depth mm 600 850 625 Electrical connection 1 Voltage V 220 240 Frequency Hz 50 Water supply pressure Min max bar MPa 0 5 0 05 8 0 8 Water supply Cold water or hot water 2 max 60 C Capacity Place settings 12 Power consumption Left on mode W 0 99 Power consumption Off mode W 0 10 1 Refer to the rating plate for other values 2 If the hot water comes from alternative source of energy e g solar panels aeolian energy use the hot water supply to decrease energy consumption Rating Plate Information for test institutes For all the necessary information for test performance send an email to info test dishwasher production com Write
5. and from Electrolux or its ASC If you reside outside of the service area you will bear the cost of a travel of an authorised representative b transportation and delivery of the Appliance to and from Electrolux or its ASC In all instances unless the Appliance is transported by Electrolux or an Electrolux authorised representative the Appliance is transported at the owner s cost and risk while in transit to and from Electrolux or its ASC Proof of purchase is required before you can make a claim under this warranty You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship Electrolux is not liable in the following situations which are not exhaustive a the Appliance is damaged by accident misuse or abuse including failure to properly maintain or service normal wear and tear power surges electrical storm damage or incorrect power supply incomplete or improper installation incorrect improper or inappropriate operation insectorvermin infestation 10 failure to comply with any additional instructions supplied with the Appliance b the Appliance is modified without authority from Electrolux in writing c the Appliance s serial number or warranty seal has been removed or defaced d the Appliance was serviced or repaired by anyone other than Electrolux an authorised repairer or ASC This warranty the contract to which it
6. by Electrolux in New Zealand the Appliances come with a guarantee by Electrolux pursuant to the provisions of the Consumer Guarantees Act the Sale of Goods Act and the Fair Trading Act To enquire about claiming under this warranty please follow these steps a carefully check the operating instructions user manual and the terms of this warranty b have the model and serial number of the Appliance available c have the proof of purchase eg an invoice available d telephone the numbers shown below You accept that if you make a warranty claim Electrolux and its ASC may exchange information in relation to you to enable Electrolux to meet its obligations under this warranty Before calling for service please ensure that the steps listed in point 13 above have been followed FOR SERVICE or to find the address of your near est state service centre in Australia Please call 13 134 9 For the cost of a local call Australia only FOR SERVICE or to find the address of your near est authorised service centre in New Zealand Free call 0800 10 66 10 New Zealand only SERVICE AUSTRALIA A Electrolux ELECTROLUX HOME PRODUCTS www electrolux com au SERVICE NEW ZEALAND E Electrolux ELECTROLUX HOME PRODUCTS www electrolux co nz FOR SPARE PARTS or to find the address of your near est state spare parts centre in Aus tralia Please call 13 13 50 For the cost of a local call Australia only FOR SPA
7. down the product number PNC that is on the rating plate 13 Warranty A Electrolux FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE DISHWASHER This document sets out the terms and conditions of the product warranties for Electrolux Appliances It is an important document Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance 1 In this warranty a acceptable quality as referred to in clause 10 of this warranty has the same meaning referred to in the ACL b ACL means Trade Practices Amendment Australian Consumer Law Act No 2 2010 c Appliance means any Electrolux product purchased by you accompanied by this document d ASC means Electrolux authorised serviced centres e Electrolux means Electrolux Home Products Pty Ltd of 163 O Riordan Street Mascot NSW 2020 ABN 51 004 762 341 in respect of Appliances purchased in Australia and Electrolux NZ Limited of 3 5 Niall Burgess Road Mount Wellington in respect of Appliances purchased in New Zealand f major failure as referred to in clause 10 of this warranty has the same meaning referred to in the ACL and includes a situation when an Appliance cannot be repaired or it is uneconomic for Electrolux at its discretion to repair an Appliance during the Warranty Period g Warranty Period means where the Appliance is used
8. for personal domestic or household use i e normal single family use as set out in the instruction manual the Appliance is warranted against manufacturing defects in Australia for 24 months and in New Zealand for 24 months following the date of original purchase of the Appliance this Appliance is not designed for commercial use and therefore no warranty applies in this case h you means the purchaser of the Appliance not having purchased the Appliance for re sale and your has a corresponding meaning 2 This warranty only applies to Appliances purchased 14 and used in Australia or New Zealand and is in addition to and does not exclude restrict or modify in any way any non excludable statutory warranties in Australia or New Zealand During the Warranty Period Electrolux or its ASC will at no extra charge if your Appliance is readily accessible for service without special equipment and subject to these terms and conditions repair or replace any parts which it considers to be defective Electrolux or its ASC may use remanufactured parts to repair your Appliance You agree that any replaced Appliances or parts become the property of Electrolux This warranty does not apply to light globes batteries filters or similar perishable parts Parts and Appliances not supplied by Electrolux are not covered by this warranty You will bear the cost of transportation travel and delivery of the Appliance to
9. the mains socket Make sure that there is no a damage fuse in the fuse box The program does not start Make sure that the appliance door is closed If the delay start is set cancel the setting or wait for the end of the count down The appliance has started the procedure to recharge the resin inside the water softener The duration of the procedure is approximately 5 minutes The appliance does not fill with wa Make sure that the water tap is open ter Make sure that the pressure of the water supply is not too low For this 1 information contact your local water authority TIIE HL iU Make sure that the water tap is not clogged Make sure that the filter in the inlet hose is not clogged Make sure that the inlet hose has no kinks or bends The appliance does not drain the Make sure that the sink spigot is not clogged water Make sure that the drain hose has no kinks or bends The display shows id A The anti flood device is on Close the water tap and contact an Authorised Service Centre The display shows JU gt Once you have checked the appliance deactivate and For alarm codes not described in the table contact an activate the appliance If the problem occurs again Authorised Service Centre contact an Authorised Service Centre 12 The washing and drying results are not satisfactory There are whitish streaks or bluish lay The release quantity of rinse aid is too much Adjust the rinse
10. the packaging Select the program according to the type of load and degree of soil With the ECO program you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil Using rinse aid and detergent Only use rinse aid and detergent for dishwasher Other products can cause damage to the appliance 10 e Ifyou use multi tablets you can select the Multitab option if available This option increases the cleaning and drying results with the use of multi tablets Detergent tablets do not fully dissolve with short programs To prevent detergent residues on the tableware we recommend that you use the tablets with long programs Do not use more than the correct quantity of detergent Refer to the instructions on the detergent packaging What to do if you want to stop using multi tablets Before you start to use separately detergent and rinse aid do the following procedure 1 Make sure that the rinse aid container is full 2 Start the shortest program with a rinsing phase Do not add detergent and do not load the baskets 3 Adjust the released quantity of rinse aid Loading the baskets Only use the appliance to wash items that are dishwasher safe Do not put in the appliance items made of wood horn aluminium pewter and copper Do not put in the appliance items that can absorb water sponges household cloths Remove remaining food from the items Make
11. RE PARTS or to find the address of your near est state spare parts centre in New Zealand Free call 0800 10 66 20 New Zealand only 15 ENVIRONMENT CONCERNS Recycle the materials with the symbol Put the not dispose appliances marked with the symbol with packaging in applicable containers to recycle it Help the household waste Return the product to your local protect the environment and human health and to recycling facility or contact your municipal office recycle waste of electrical and electronic appliances Do 16 17 dishlex www dishlex com au 156978630 A 282014
12. dishlex A N df N hd User Manual J d y 4 gt N g N Dishwasher L AS J p d DSF6305W DSF6305X Contents Safety information __ 2 Daily use _ 7 Safety instructions __ a Hints and Ps ios tias 10 Control panel__ 4 Care and cleaning 11 Programs nm maja a cun 5 Troubleshooting 2 2 22 222 12 setlings es loc ei 6 Technical information____ 13 Before first se __ _ 7 Warrantv __ 14 Subject to change without notice A N Safety information Before the installation and use of the appliance carefully read the supplied instructions The manufacturer is not responsible if an incorrect installation and use causes injuries and damages Always keep the instructions with the appliance for future reference Children and vulnerable people safety This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Do notlet children play with the appliance Keep all detergents away from children Keep children and pets away from the appliance door when it is open Clean
13. door and to the mains cable Should the mains cable Dishwasher detergents are dangerous Obey the need to be replaced this must be carried out by our safety instructions on the detergent packaging Authorised Service Centre Do not drink and play with the water in the appliance Do not remove the dishes from the appliance until the programme is completed There can be detergent on the dishes The appliance can release hot steam if you open the door while a programme operates Do not put flammable products or items that are wet with flammable products in near or on the appliance Service Contact the Authorised Service Centre to repair the appliance We recommend only the use of original spare parts Control panel ar When you contact the Authorised Service Centre ensure that you have the following information that is available on the rating plate Model PNC Serial Number Disposal IN Warning Risk of injury or suffocation Disconnect the appliance from the mains supply Cut off the mains cable and discard it Remove the door catch to prevent children and pets to get closed in the appliance Eco AUTO o o 50 45 70 70 OGO On off button Display Indicators Indicators Delay button Program buttons XA gg L R LRRLu Iu Y e i I Xi O gt End indicator e Multitab indicator Rinse aid indicator It is always off while the program operates
14. gram Information for test institutes Write down the product number PNC that is on the For all the necessary information for test performance rating plats send an email to info test dishwasher production com Settings Program selection mode 50 459 709 70 60 Delay DODODOS gt U Reset or BBS boed The appliance is in Program selection mode when all the program indicators come on and the display shows 2 horizontal status bar When the appliance is in Program selection mode it is possible to set a program i If the control panel does not show this condition use the Reset function Reset greet Br 50 459 709 70 Delay 45 70 70 60 Delay 099005 3 044200 3100 Reset With Reset you can cancel the running program or the delay start Press and hold A UTO and amp until the appliance goes back to the Program selection mode Activating Rinse Aid with option Multi Tab activated Lapa Ba CH sgol 50 45 70 70 60 Delay Delay O2I 0000 OF 4 O00 3 Reset Sei AUTO amp Ge y 24 Sei AUTO amp amp O O O O o O O O O Reoooo amp 499900 50 45 70 70 609 Delay O gt l 50 45 70 70 Reset 1 Make sure that the appliance is in Program en mode 2 Press and hold at the same time A UTO and amp until the indicators
15. ing and user maintenance shall not be made by children without supervision General Safety This appliance is intended to be used in household and similar applications such as farm houses staff kitchen areas in shops offices and other working environments by clients in hotels motels bed amp breakfast and other residential type environments Do not change the specification of this appliance The operating water pressure minimum and maximum must be between 0 5 0 05 8 0 8 bar kPa Obey the maximum number of 12 place settings If the supply cord is damaged it must be replaced by the manufacturer its Authorised Service Centre or a similarly qualified persons in order to avoid a hazard Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position Do not keep the appliance door open without supervision to prevent to fall on it Before maintenance deactivate the appliance and disconnect the mains plug from the mains socket Do not use water spray and steam to clean the appliance The appliance is to be connected to the water mains using the new supplied hose sets Old hose sets must not be reused The ventilation openings in the base if applicable must not be obstructed by a carpet Some dishwasher detergents are strongly alkaline They can be extremely dangerous if swallowed Avoid contact with the skin and eyes and keep children away from the dishwasher
16. on of the program After 5 minutes if the program has not started Starting a program F LATI Reset J ECO Press the on off button to activate the appliance Make sure that the appliance is in program selection mode 2 Press the button related to the program you want to start The related program indicator starts to flash e The display shows the program duration 3 Close the appliance door to start the program The running program indicator comes on The program duration starts to decrease with steps of 1 minute Option Delay ym AUTO O O O Oo Reset 1 Set the program 2 Press Delay until the display shows the delay time you want to set 3 Close the appliance door the countdown starts The countdown starts to decrease with steps of 1 hour When the countdown is completed the program starts Option Multi Tab Any 024040 passa 3 50 459 709 70 Delay 500 455 709 70 60 0000900 a OO ftt Reset Reset Activate or deactivate the Multi Tab option before the start of the program This option will stay on until you deactivate it Activate Multi Tab option only when you use the combi detergent tablets This option deactivates the flow of rinse aid The related indicators is off The program duration can increase This option is not applicable to Wy Opening the do
17. or while the appliance operates If you open the door while a program is running the appliance stops When you close the door the appliance continues from the point of interruption i If the door is opened for more than 30 seconds during the drying phase the running program will end Press on off button or wait for Auto Off to deactivate the appliance At the end of the program SE li dia 20 O Lp Auto OFF SOC E min gwaer OOC OO O y Press the on off button to deactivate the appliance If you don t press the on off button the Auto Off function automatically deactivates the appliance a few minutes after the end of the program Hints and tips General The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment Remove larger residues of food from the dishes into the waste bin Do not pre rinse dishes by hand When needed use the prewash program if available or select a program with a prewash phase Always use the whole space of the baskets When loading the appliance make sure that the dishes can be completely reached and washed by the water released from the spray arm nozzles Make sure that items do not touch or cover each other e You can use dishwasher detergent and rinse aid separately or you can use the multi tablets e g 3in1 4in1 All in 1 Follow the instructions written on
18. relates and the relationship between you and Electrolux are governed by the law applicable where the Appliance was purchased Where the Appliance was purchased in New Zealand for business purposes the Consumer Guarantee Act does not apply To the extent permitted by law Electrolux excludes all warranties and liabilities other than as contained in this document including liability for any loss or damage whether direct or indirect arising from your purchase use or non use of the Appliance For Appliances and services provided by Electrolux in Australia the Appliances come with a guarantee by Electrolux that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the Appliance repaired or replaced if the Appliance fails Important Notice 11 12 13 14 to be of acceptable quality and the failure does not amount to a major failure The benefits to you given by this warranty are in addition to your other rights and remedies under a law in relation to the Appliances or services to which the warranty relates At all times during the Warranty Period Electrolux shall at its discretion determine whether repair replacement or refund will apply if an Appliance has a valid warranty claim applicable to it For Appliances and services provided
19. soft the remaining burned food on the items e Put hollow items cups glasses and pans with the opening down Make sure that cutlery and dishes do not bond together Mix spoons with other cutlery Make sure that glasses do not touch other glasses Put small items in the cutlery basket Put light items in the upper basket Make sure that the items do not move Make sure that the spray arm can move freely before you start a program Before starting a programme Make sure that The filters are clean and correctly installed The spray arms are not clogged Care and cleaning Warning Before maintenance deactivate the appliance and disconnect the mains plug from the main socket Cleaning the filters There is dishwasher rinse aid unless you use multi tablets The position of the items in the baskets is correct The programme is applicable for the type of load and for the degree of soil The correct quantity of detergent is used Unloading the baskets 1 2 1 1 Let the tableware cool down before you remove it from the appliance Hot items can be easily damaged First remove items from the lower basket then from the upper basket At the end of the program water can still remain on the sides and on the door of the appliance Dirty filters and clogged spay arms decrease the washing results Make a check regularly and if necessary clean them
20. when the door is open Check that the detergent receptacle is empty after completion of the wash cycle Safety instructions Installation Connect the mains plug to the mains socket only at the end of the installation Make sure that there is access to the mains plug after the installation Do not pull the mains cable to disconnect the appliance Always pull the mains plug Remove all the packaging Do not install or use a damaged appliance Do not install or use the appliance where the temperature is less than 0 C Obey the installation instruction supplied with the Water connection appliance Make sure not to cause damage to the water hoses Electrical connection Before you connect the appliance to new pipes or pipes not used for a long time let the water flow Warning Risk of fire and electrical until it is clean shock The first time you use the appliance make sure that there is no leakage e If the water inlet hose is damaged immediately disconnect the mains plug from the mains socket Contact the Authorised Service Centre to replace the water inlet hose The appliance must be earthed Make sure that the electrical information on the rating plate agrees with the power supply If not contact an electrician Always use a correctly installed shockproof socket Do not use multi plug adapters and extension Use cables Make sure not to cause damage to the mains plug Do not sit or stand on the open
Download Pdf Manuals
Related Search