USER MANUAL SMPS-1000 - Home Health and Fitness
Contents
1. If the external device original sound source is of poor quality distortion and noise are easily noticed with high power speakers Try a different audio source such as a music CD Sound source is distorted If you are using an external sound source like older generation of iPod try reducing the output volume on the device itself Also try turning bass boost OFF or change the EQ setting Sound is distorted Unit gets warm after extended play at This is normal high volume Turn the unit off for a period of time or lower volume 14 SPECIFICATION Power requirement Main Unit AC 120V 60Hz Power Consumption 40 W Remote Control 1 X DC CR2025 lithium Battery Frequency Range Radio Band FM 87 5 108 MHz At Spectra environmental and social responsibility is a core E C TRA value of our business We are dedicated to continuous 2 implementation of responsible initiatives with an aim to conserve and maintain the environment through responsible recycling Please visit us at http www spectraintl com green htm for more information on Spectra s green initiatives or to find a recycler in your area 15 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U S A ONLY SPECTRA MERCHANDISING INTERNATIONAL INC warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the pr2. Plug one end into the LINE IN Aux in jack on the rear of main unit and the other end of the cable into the Line out Jack or Headphone Jack of your external audio device Turn on the external audio device and the main unit To select auxiliary audio input press the SOURCE button to select LINE IN mode LIN message shows on LCD display 5 The volume level can now be controlled through the main unit Operate all other functions on the auxiliary device as usual N A 12 If you connect this unit to the Line Out Jack of your external device then you only need to adjust the volume control of this unit If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this unit to find the most desirable volume setting Press the POWER button to turning off the unit when you finish listening Don t forget to switch off the power of your external device as well RESETTING If the system does not respond or exhibits erratic or intermittent operation you may have experienced an electrostatic discharge ESD or a power surge that triggered the internal microcontroller to shut down automatically If this occurs you can use a straightened paper clip toothpick or similar objects to press the RESET button located at the rear of the unit to restore the unit to its factory preset condition CAUTION DO NOT USE SHARP
3. eymbol provided by RETAC 13 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over IN A AD 10 00000S 190 14 Unplug this apparatus during lightning storms or when unused for long 8 periods of time 15 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 16 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus 17 Main plug is used as disconnect device and it should remain readily operable during intended use In order to disconnect the apparatus from the mains completely the mains plug should be disconnected form the mains socket outlet completely 18 Caution mark and name plate are located at the back of apparatus 19 Battery shall not be exposed to excessive heat such as sunshine fire or the like 20 CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type SAVE THESE INSTRUCTIONS 3 IMPORTANT NOTES Avoid installing the unit
4. best reception NOTE Automatic tuning depends on the signal strength of the broadcasting station so weak stations may be skipped You can manually tune to find the weak stations if a station gets skipped With strong signals the tuner may stop before it reaches the actual broadcast frequency so you may need to manually tune for the best reception PRESET RADIO STATIONS This unit has 20 preset memories for the FM radio 1 2 3 4 5 6 7 Press the POWER button to turn on the unit Press the SOURCE button to select TUNER mode Tune to the desired radio station either by manually or automatically tuning method Tap the MEMORY button on the remote to enable the program function and the preset location P01 will show on the LCD display and flash Press the MEM or MEM button to select the preset number you want to assign the station to Tap the MEMORY button on the remote to confirm the setting Repeat above steps 3 6 to store other stations RECALLING PRESET MEMORY CHANNELS In radio mode recall the pre set channels by tap the MEM button on the remote repeatedly BLUETOOTH OPERATION PAIRING LINKING A BLUETOOTH ENABLED CELL PHONE OR OTHER BLUETOOTH ENABLED DEVICE to the SMPS 1000 1 With the power on tap the SOURCE button repeatedly to select Bluetooth mode The Bluetooth indicator will flash blue for about 1 5 minutes The SMPS 1000 is ready to pair link with your Bluetooth devi
5. TV or monitor if unnatural color shifts or image distortion occurs CONNECTING THE AC POWER CORD After connecting the speakers fully unwind the AC power cord and connect it to any convenient household 120V 60Hz AC outlet REMOTE CONTROL BATTERY INSTALLATION The remote control operates on one CR2025 battery included To activate the remote control remove the insulation tab inserted in the battery compartment To remove the tab pull it in the direction of the arrow in the illustration as shown When the operation of the remote control becomes intermittent or unsatisfactory replace the original battery with a new 3 volt lithium battery Replacing the battery in the remote control 1 Press in on the side of the battery holder and pull the holder out of the remote 2 Removed the exhausted battery and then install 1 new CR2025 lithium battery according to the polarity diagram on the battery compartment 3 Insert the battery holder into the remote control and make sure it locks into place NOTE Only use a well known brand of battery to ensure the longest life and best performance Battery Precautions Replacement of batteries must be done by an adult The supply terminals are not to be short circuited Non rechargeable batteries are not to be recharged Exhausted batteries are to be removed Only batteries of the equivalent type are to be used Batteries are to be inserted with the correct polarity Dispose
6. go into Standby mode automatically after selected time has expired If you are falling asleep to music from an external device connected to AUX input the sleep timer will shut off the power to this unit but it will not turn off power to the external device MUTE Remote Control Only Press the MUTE button on remote control to mute the sound output from speaker temporarily MUTE message will appear on display and flashing Press the MUTE button again to resume to normal speaker playback LISTENING TO AUDIO FROM A TV DVD PLAYER VCR OR DVR You can connect this unit to other external audio devices using the AUX IN RCA jacks located on the back of the unit 1 Connect the external TV DVD VCR DVR to AUX IN RCA connectors on the back of the unit RCA connection cable included Make sure the color codes of the plugs are correct to the connectors 2 Press the POWER button to turn the unit on 3 Select auxiliary audio input by pressing the SOURCE button repeatedly to select AUX mode AUX message shows on display 4 The volume level can now be controlled through the main unit Operate all other functions on the external device as usual AUXILIARY INPUT This unit provides an auxiliary audio signal input jack for connecting external audio devices like MP3 players CD players and listen to them through the speakers of this unit 1 Use an audio cable not included with one 3 5 mm stereo plug on each end of the cable
7. in locations described below e Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters e Places subject to constant vibration e Dusty humid or moist places CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT THE PLUG TO MAIN POWER SOCKET AC Outlet AC Plug COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or re
8. instructions in the literature accompanying the appliance 1 2 3 4 5 IMPORTANT SAFETY INSTRUCTIONS Read these Instructions Keep these Instructions Heed all Warnings Follow all Instructions Do not use this apparatus near water 6 Clean only with a dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions Minimum distances 2 cm around the apparatus for sufficient ventilation The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 No naked flame sources such as lighted candles should be placed on the apparatus 10 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 11 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus PORTABLE CART WARNING 12 Only use attachments accessories specified by the manufacturer
9. of batteries properly Do not dispose of batteries in fire The batteries may explode or leak CLOCK SETTING Using the remote control After plugging in the AC power cord 12 00 will appear and start flashing on the LCD display In unit standby mode 1 Press and hold the CLOCK button on the remote control until CLK shows on the display the hour digits blinking 2 Press the M4 button on the remote control repeatedly to adjust the hour Press and hold the buttons to speed up the forward or reverse scanning of the digits Note Make sure the hour is set so that the PM indicator is displayed correctly 3 Press the CLOCK button to confirm Minute digits start blinking on the screen to prompt for input 4 Press the M4 button repeatedly to adjust the minute Press and hold the buttons to speed up the forward or reverse scanning of the digits 5 Press the CLOCK button to complete the setting LISTENING TO THE FM RADIO TUNING THE FM RADIO 1 Press the POWER button to turn on the unit 2 Press the SOURCE button repeatedly to select TUNER RADIO mode 3 To manually tune the radio station press TUNING Y button on the unit or button on the remote control repeatedly Use the manual tuning method to tune to weaker stations that are bypassed during Automatic Tuning 4 To automatically tune to the next radio station with the strongest signal press and hold the 44 button on the remot
10. BLUETOOTH STEREO SPEAKER WITH FM RADIO USER MANUAL SMPS 1000 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE DEAR JENSEN CUSTOMER Selecting fine audio equipment such as the unit you ve just purchased is only the start of your musical enjoyment Now it s time to consider how you can maximize the fun and excitement your equipment offers This manufacturer and the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level One that lets the sound come through loud and clear without annoying blaring or distortion and most importantly without affecting your sensitive hearing Sound can be deceiving Over time your hearing comfort level adapts to higher volumes of sound So what sounds normal can actually be loud and harmful to your hearing Guard against this by setting your equipment at a safe level BEFORE your hearing adapts To establish a safe level e Start your volume control at a low setting e Slowly increase the sound until you can hear it comfortably and clearly and without distortion Once you have established a comfortable sound level e Set the dial and leave it there Taking a minute to do this now will help to prevent hearing damage or loss in the future After all we want you listening for a lifetime We Want You Listening For a Lifetime Used wisely you
11. POINTED OBJECT TO PRESS THE RESET BUTTON IT MAY DAMAGE THE RESET SWITCH INSIDE THE UNIT Please note that current time will be cleared and will need to be reset so be sure to set up the clock again according to previous sections above Note In very rare instances such as an electrostatic discharge on a dry cold winter day if the unit still fails to reset after pressing the RESET Button you should unplug it from the AC power source for at least 3 minutes After 3 minutes plug the unit back in and press the RESET button again CARE AND MAINTENANCE 1 Do not subject the unit to excessive force shock dust or extreme temperature 2 Do not tamper the internal components of the unit 3 Clean your unit with a dry cloth Solvent or detergent should never be used 4 Avoid leaving your unit in direct sunlight or in hot humid or dusty places 5 Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors CLEANING THE UNIT To prevent fire or shock hazard disconnect your unit from the AC power source when cleaning The finish on the unit may be cleaned with a dust cloth and cared for as other furniture Use caution when cleaning and wiping the plastic parts Ifthe cabinet becomes dusty wipe it with a soft dry dust cloth Do not use any wax or polish sprays on the cabinet If the front panel becomes dirty smudged with fingerprints it may be cleaned with 13 a soft clo
12. UNING SKIP UP A BUTTON BLUETOOTH PAIR PLAY PAUSE Pll BUTTON SOURCE BUTTON LCD DISPLAY 10 REMOTE INFRARED SENSOR 11 AUX IN L R RCA CONNECTORS 12 LINE IN JACK 13 RESET BUTTON 14 AC POWER CORD COONDARWNH REMOTE CONTROL 4 el 3 4 8 9 10 11 98 OO OO 12 13 266 OO ROP SOURCE BUTTON MUTE BUTTON MEMORY BUTTON MEM BUTTON NUMERIC BUTTONS BASS CONTROL BUTTONS TREBLE CONTROL BUTTONS POWER ON STANDBY BUTTON BLUETOOTH PAIR PLAY PAUSE Pll BUTTON 10 FM MONO STEREO BUTTON 11 MEM BUTTON 12 CLOCK BUTTON 13 SLEEP BUTTON 14 SKIP BACK M TUNING DOWN SKIP FORWARD i TUNING UP BUTTONS 15 VOLUME BUTTONS OO NANAWNH GETTING STARTED CONNECTING THE SMPS 1000 TO EXTERNAL AUDIO DEVICES You can connect the SMPS 1000 audio input to the audio output of your television or VCR Please see figure below SS 7 NOTE 1 Make sure that the power is turned off when connecting or disconnecting the other devices Make sure that the other devices are connected to the correct terminals 6 2 This unit is not magnetically shielded and may cause color distortion on the screen of some TVs or video monitors To avoid this you may need to move the unit further away from the
13. at some point even with both Bluetooth devices turned on You can re link them by 1 Press and hold the PAIR Pll button to re link your cell phone The Bluetooth indicator will blink for about 1 5 minutes for linking 2 Select SMPS 1000 on your cell phone for linking Bluetooth indicator will turn to solid blue if the SMPS 1000 and your cell phone have been re linked successfully 3 You can also re link the SMPS 1000 by using Bluetooth operation of your cell phone Please refer to operation manual of your cell phone for more information SLEEP TIMER OPERATIONS Remote Control Only 1 In Radio Bluetooth Line In or AUX mode press the SLEEP button on remote control once and the SLEEP indicator will appear on the LCD display 2 Tap the SLEEP button repeatedly to select the desired sleep time The sleep time can be between 10 90 minutes in 10 minute the steps shown below 90 80 70 60 50 40 30 20 10 off 3 After sleep timer selected wait for 3 seconds to confirm The SLEEP indicator continues to appear on the LCD The unit will stop and go into Standby mode automatically after selected sleep time has expired 4 To check remained sleep time simply press the SLEEP button 5 Press the POWER button once to switch off the unit before the selected sleep time expires 11 Ifyou press the SLEEP button once and the SLEEP indicator appears the LCD display the unit will
14. c through the speaker even after it s paired linked 4 lf you are pairing linking your computer to the SMPS 1000 using Bluetooth you may need to set the SMPS 1000 as your computer s default sound device PLAYBACK MUSIC ON YOUR BLUETOOTH DEVICE USING THE REMOTE CONTROL 1 Press the POWER button to turn on the unit 2 Turn on Bluetooth of your cell phone or device which has been successful pairing with SMPS 1000 before press the SOURCE button to select Bluetooth mode the 10 PAIRING message appears on the LCD display and Bluetooth LED indicator Blinking 3 After the Bluetooth device is paired with the SMPS 1000 press the PLAY PAUSE PII button to start playback music in your cell phone or Bluetooth device 4 Press the PLAY PAUSE Pll button to pause or resume playback 5 Press the VOLUME button to adjust your desired volume level If necessary press the TREBLE or BASS button on the remote control to adjust treble or bass effect to the desired level 7 Press the M4 or button on the remote or TUNING button on the unit to select the desire music track Press and hold the M4 or gt button on the remote TUNING V button on the unit for fast rewinding or fast forwarding during playback 8 Press the POWER button to turn off the unit after listening Re linking to the cell phone If your cell phone or Bluetooth device is already paired with the SMPS 1000 but became unlinked
15. ce 2 Turn on the Bluetooth feature of your cell phone and enable the search or scan feature to find the SMPS 1000 3 Select SMPS 1000 from the device list when it appears on your device screen If required enter the pass code 0000 to pair link the SMPS 1000 with your cell phone 4 After successfully pairing linking your cell phone with the SMPS 1000 the Bluetooth indicator turns solid blue and display changes message from PAIRING to CONNECT for few seconds then show BT mode You can play music from your cell phone wirelessly to the SMPS 1000 Note If you want to connect the SMPS 1000 to another cell phone after pairing successfully then you need to turn off the Bluetooth on the paired cell phone first if it is in range before going through the above steps Otherwise the SMPS 1000 will automatically reconnected to previously linked cell phone 5 Press the VOLUME button to adjust the desired volume level 6 To turn off the SMPS 1000 Bluetooth press the POWER button to turn the unit to standby mode Don t forget to also turn off the Bluetooth feature on your cell phone Notes 1 Refer to manual of your cell phone or other Bluetooth enabled device for Bluetooth operation since it may vary from model to model 2 Pairing mode will be canceled and the LED indicator turns off if pairing is unsuccessful within 1 5 minutes 3 If your Bluetooth enabled device does not support A2DP it will not play the musi
16. e or TUNING Y button on the unit for 1 2 seconds until frequency readout on the display begins to scan and then release the button The tuner will stop scanning when it receives the next strongest station signal Note When listening to radio it will display the radio station frequency for few seconds when tuning and then return to display the current time 5 You can also direct enter the radio station frequency via the numeric buttons on the remote control For example press buttons 8 9 8 and then wait for few seconds to get to 89 8 MHz If entered frequency is invalid out of range ERROR message will display on the screen 6 Press the VOLUME button to adjust the volume control to the desired level 7 If necessary press the TREBLE or BASS button on the remote control to adjust treble or bass effect to the desired level amp FM STEREO RECEPTION Press the FM MONO STEREO button on the remote control to switch between FM STEREO and FM MONO modes Set the FM reception to stations will be received in MONO mode When an FM station is weak or distorted listening is usually improved by switching the FM reception to MONO mode Set the FM mode to the STEREO to receive stereo broadcasts The STEREO indicator will show in LCD display to show an FM stereo station is detected HINTS FOR BEST RECEPTION The receiver has a build in FM wire antenna slightly rotate the unit or reposition for the
17. locate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Protect Your Furniture This product is equipped with non skid rubber feet to prevent the product from moving when you operate the controls These feet are made from non migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture However certain types of oil based furniture polishes wood preservatives or cleaning sprays may cause the rubber to soften and leave marks or a rubber residue on the furniture To prevent any damage to your furniture we strongly recommend that you purchase small self adhesive felt pads available at hardware stores and home improvement centers everywhere and apply these pads to the bottom of the rubber before you place the product on fine wooden furniture ie MAIN UNIT ee BLUETOOTH INDICATOR POWER ON STANDBY BUTTON VOLUME BUTTON VOLUME BUTTON TUNING SKIP DOWN VW BUTTON T
18. oduct is utilized within the U S A This warranty is not assignable or transferable Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof except batteries when it is returned to the SPECTRA Service Department accompanied by proof of the date of original consumer purchase such as a duplicate copy of a sales receipt You must pay all shipping charges required to ship the product to SPECTRA for warranty service If the product is repaired or replaced under warranty the return charges will be at SPECTRA s expense There are no other express warranties other than those stated herein This warranty is valid only in accordance with the conditions set forth below 1 The warranty applies to the SPECTRA product only while a It remains the possession of the original purchaser and proof of purchase is demonstrated b It has not been subjected to accident misuse abuse improper service usage outside the descriptions and warnings covered within the user manual or non SPECTRA approved modifications c Claims are made within the warranty period 2 This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with electrical codes or SPECTRA user manual specifications or failure to provide reasonable care and necessary maintenance as outlined in the user manual 3 Warranty of all SPECTRA products applies to residential use only and is void when prod
19. r new sound equipment will provide a lifetime of fun and enjoyment Since hearing damage from loud noise is often undetectable until it is too late this manufacturer and the Electronic Industries Association s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise Customer s Record The serial number of this product is found on its back cover You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss Model Number SMPS 1000 Serial Number WARNINGS WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture CAUTION Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing
20. th slightly dampened with a mild soap and water solution Never use abrasive cloths or polishes as these will damage the finish of your unit CAUTION Never allow any water or other liquids to get inside the unit while cleaning TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player please refer to the following chart or call 1 800 777 5331 for Product Service and Support Symptom Possible Problem Solution The unit is disconnected from the AC outlet The AC outlet has not power Try the unit on another outlet Unit is ON but there The volume control has been Turn the Volume control to a higher The unit does not Reconnect to the AC outlet respond no power is low or no volume turned all the way down output Bluetooth speaker is not linked Go through Bluetooth Operations No Sound with the cell phone process to link the speakers Speaker placement out of Relocate the speaker within range Bluetooth operating range Noise or sound Station not tuned properly for Retune the FM broadcast station distorted on FM FM Slightly rotate or reposition the broadcast unit You have tuned to a mono Select another FM station or extend FM ST does not station or the station is too or rotate the wire antenna for best appear in the weak reception display Press the FM MONO STEREO PU MODE button to switch to STEREO Volume level is set too high Decrease the volume
21. ucts are used in a nonresidential environment or installed outside the United States This warranty gives you specific legal rights and you may also have other rights which vary from state to state TO OBTAIN SERVICE please remove all batteries if any and pack the unit carefully and send it freight prepaid to SPECTRA at the address shown below IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above please include a proof of purchase dated cash register receipt so that we may establish your eligibility for warranty service and repair of the unit without cost Also include a note with a description explaining how the unit is defective A customer service representative may need to contact you regarding the status of your repair so please include your name address phone number and email address to expedite the process IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD please include a check for 75 00 to cover the cost of repair handling and return postage All out of warranty returns must be sent prepaid It is recommended that you contact SPECTRA first at 1 800 777 5331 or by email at custserv spectraintl com for updated information on the unit requiring service In some cases the model you have may be discontinued and SPECTRA reserves the right to offer alternative options for repair or replacement SPECTRA MERCHANDISING INTERNATIONAL INC 4230 North Normandy Avenue Chicago IL60634 USA 1 800 777 5331 To register your product
22. visit the link on the website below to enter your information http www spectraintl com wform htm 0612 Printed in China 16
Download Pdf Manuals
Related Search