TRANSWORLD AQUATIC ENTERPRISES INC
Contents
1. The Ultimete Curved blass Biotope OWNER S MANUAL TABLE CONTENTS Important Safety Instructions 6 Gallon Exploded View Parts 12 Gallon Exploded View Parts Introduction Getting Started Heating Lighting Maintenance Procedures Maintenance Log Important Safety Instructions WARNING To guard against injury basic safety precautions should be ob served including the following READ ALL SAFETY INSTRUCTIONS BEFORE USE DANGER To avoid possible electric shock special care should be taken since water is employed in the use of aquarium equipment For each of the following situations do not attempt to repair your self return the appliance to an authorized service facility for ser vice or discard the appliance A If the appliance falls into water DON T reach for it First un plug it and then retrieve it If the electrical components of the appliance get wet unplug the appliance immediately B Carefully examine the appliance after installation It Should not be plugged in if there is water on parts not intended to be wet C Do not operate any appliance if it has a damaged cord or plug or if it is malfunctioning or if it is dropped or damaged in any manner D To avoid the possibility of the appliance plug or receptacle getting wet position aquarium stand and tank to one side of a wall mounted receptacle to prevent water from dripping ont2. MT 30 MT 30 NIN 3 0 compact fluorescent lamp splash guard MT 30 22 splash guard o ring MT 30 23 sliding leg MT 30 24 sliding leg retainer MT 30 MT 30 25 26 return elbow directional return nozzle male MT 30 27 directional return nozzle female MT 30 28 bio balls MT 30 29 activated carbon bag MT 30 MT 30 30 31 ceramic ring bag Sponges chamber MT 30 32 return tube MT 30 33 powerhead MT 30 34 sliding track right MT 30 MT 30 35 36 sliding track left glass aquarium WANO CUBE Parts PARTS EXPLODED VIEW amp IDENTIFICATION 12G NANO CUBE ORIGINAL Parts 12 GALLON ORIGINAL PART Name 40 1 canopy shell MT 40 2 3 position power switch 40 3 canopy shell 40 4 5 relief bushing MT 40 5 3 prong power cord 40 6 wire grommet MT 40 7 12v DC cooling fans 40 8 magnetic ballast MT 40 9 electronic ballast MT 40 10 AC to DC converter 12v MT 40 11 LEDs MT 40 12 reflector MT 40 13 fuse holder MT 40 14 fuse MT 40 15 compact fluorescent lamp MT 40 16 lamp retaining clip MT 40 17 splash guard MT 40 18 return elbow MT 40 19 directional return nozzle male MT 40 20 directional return nozzle female MT 40 21 return tube
3. average of per gallon of live rock will create a live biologi cal filtration system as well as denitrification system ultimately creating a balanced biotope 4 Submersible Pump Included with flexible hose and elbow connector 6g Nano Cube Original 148 gph 12g Nano Cube Original 148 gph Note All Nano Cubes include a output return nozzle for directional flow control Modular Surface Skimmer nstantly transforms your intake grill into a true overflow box This innovative attachment installs in seconds by placing in front of the intake grill once the tank is filled and pump is turned on The Modular Sur face Skimmer will create a vacuum and water will start to over flow and remove annoying surface film and proteins that collect above the water surface Note Please maintain rear chamber water levels so pump will not run dry Water evaporation will occur in the rear chambers when Modular Surface Skimmer is used 12 Getting Started HANDLING PRECAUTIONS Never attempt to move a full or partially full Nano Cube Never lift by grabbing the aquarium frame Never use cleaners that contain ammonia to clean the glass sur faces Always lift and carry the Nano Cube from underneath giving support to the bottom at all times CHOOSING A LOCATION A With a Nano Cube Stand 1 Find a leveled surface and place Nano Cube on top of stand before filling with water Make sure that no par
4. Keep the lid closed and pull the canopy lid towards the front of the tank The canopy will unsnap from the aquarium frame FRONT VIEW SIDE VIEW Removing the Clear Splashguard Cover Place the canopy on a leveled flat surface and remove screws located on the perimeter of the splash guard with a Phillips Screwdriver by hand Removing Lamps Remove lamp s from lamp clip and pull opposite direction from the ceramic lamp holder The lamp will automatically unsnap Re install new lamp 5 you should hear a snap when lamp is securely locked into ceramic lamp holder 19 Maintenance Log 20 Maintenance Log 21 WNANO CUBE Notes Notes Customer Service Information For additional information or technical assistance please call us at 310 672 4099 M F from 9AM 5PM Pacific Standard Time 23 Transwarld Aquatic Ent Inc Phone 310 672 0480 3730 West Century Blvd Suite 3 Fax 910 672 726 Inglewood 90808 E mail salesEjbjlighting com 24
5. MT 40 22 powerhead MT 40 23 activated carbon bag MT 40 24 ceramic ring bag 40 25 bio balls 40 26 sponges chamber MT 40 27 canopy leg stands MT 40 28 aquarium trim MT 40 29 jglass aquarium Introduction CREATING THE ULTIMATE NANO EXPERIENCE Thank you for purchasing the Nano Cube Aquarium This state of the art system incorporates a beautiful curved glass aquarium that offers panoramic viewing with the high tech performance of an integrated daylight illumination system Nite Vu nocturnal illumination system dual fan ventilation and 3 stage filtration system with surface skimming option JBJ ILLUMINATION SYSTEM Your Nano Cube is installed with an integrated electronic illumi nation system that is the key to a successful biotope while pro viding a brilliant color appearance to enhance the natural col ors of fish and corals All models include a polished mirror reflector with 1 compact fluorescent lamp that produce 3 times more light output than traditional fluorescent lamps Our daylight lighting system util izes an energy saving electronic ballast for flicker free instant starts and low heat production Our 50 50 lamps are a breakthrough in the industry with both purified white daylight side by side next to our 7 100K blue actinic for the perfect combination of the sun s spectrum Nite Life We ve also incorpor
6. aces are dry before re plugging into an electrical outlet To prevent scratching the aquarium use a damp terrycloth when clean ing Never use algae scrapers scouring pads razor blades glass cleaner or other such abrasives SERVICING In order to assure proper electrical connections and polarity replacement parts and servicing should be performed only by a qualified electrician OPERATION Please carefully read the entire Owners Manual for proper operation procedures before proceeding with turning on this appliance and adding livestock such as fish corals and inverte brates SAVE THESE INSTRUCTIONS Parts PARTS EXPLODED VIEW amp IDENTIFICATION 6g NANO CUBE 6 GALLON Parts PART Name MT 30 canopy shell MT 30 feeding Lid MT 30 3 position power switch MT 30 MT 30 3 prong power cord strain relief bushing MT 30 feeder lid retaining bracket MT 30 12v DC cooling fans MT 30 wire grommet MT 30 MT 30 MT 30 R O NE gt hinge clips to DC converter 12v electronic ballast MT 30 N magnetic ballast MT 30 s LEDs MT 30 MT 30 MT 30 reflector fuse holder fuse MT 30 N lamp retaining clip MT 30 U wire grommet MT 30 c lamp socket
7. alled before operating it K Read and observe all the important notices on the appliance L This Appliance has a polarized plug one blade is wider than the other As a safety feature this plug will fit in a polarized out et only one way If the plug does not fit fully in the outlet re verse the plug If it still does not fit contact a qualified electrician ever use with an extension cord unless plug can be fully in serted Do not attempt to defeat this safety feature M This appliance is intended FOR HOUSEHOLD USE ONLY Do not use or mount this appliance in such a way that the top vents are restricted or blocked These vents are necessary to avoid over heating and insure safe operating temperature Important Safety Instructions Make sure that the appliance is set on a level surface to pre vent undue stress on the aquarium tank from stress and leaks It is not recommended that this appliance is set upon coffee ta bles end tables T V stands or night stands unless the structure has been properly tested to within the weight limits of the aquarium CLEANING It is important to keep this hood appliance clean Always un plug the appliance before performing maintenance or clean ing of the exterior of this hood Wipe exposed surfaces care fully with a damp terrycloth to remove any dust or mineral deposits which may collect over time Make sure all surf
8. ated our new Nite vu LED Moonlights to illuminate nocturnal behaviors These dim LED s casts a natural rhythmic light cycle for a more natural environment for your livestock and provide the perfect backlight for viewing IANO CUBE Introductigif CRYSTAL CLEAR CURVED GLASS Nano Cube Aquariums offer panoramic viewing with smooth rounded corners for maximum viewing and enjoyment INTEGRATED 3 STAGE FILTRATION Our comprehensive 3 Stage Filtration system keep aquariums sparkling clean and is discreetly hidden behind a false wall to provide an uncluttered and professional look and feel Filter Compartments amp Media Set Up Chamber 1 Mechanical Sponge Chamber 3 Submersible Chamber 2 Pump Bio Balls Activated Carbon Bag Ceramic Ring Bag 11 E NO CUBE introduction 1 Mechanical Filtration Filter Sponge traps free floating particulate matter and debris 2 Chemical Filtration Activated Carbon bag removes dissolved organics and odor 3 Biological Filtration Ceramic Ring bag provides internal external surface area for housing beneficial bacteria to oxidize harmful ammonia and nitrite that accumulate in the aquarium from fish wastes overfeeding and normal biological processes Bio Balls provide extra support to the ceramic ring bag for tanks with extra heavy biological load Note Ceramic Ring bag amp Bio Balls can be removed if using this Nano Cube as a minireef aquarium Maintaining an
9. ed Carbon Bag on a monthly basis BIO BALLS amp CERAMIC RINGS Chamber 2 Bottom Level A Biological media should not be removed as it houses the beneficial nitrifying bacteria for removal of ammonia and nitrite B This media does not need to be changed Chamber 1 Chamber 2 Chamber 3 17 Maintenance Procedures SAFETY Always disconnect the power supply from the wall outlet when performing lamp changes CHANGING THE LAMPS Your Nano Cube is installed with the following Model Bulb Item Description Kelvin 6g Model B18 BW10K 18 Watt Compact Half 10K Day Fluorescent Lamp light Half 7100K Actinic Blue 12g Original B24 BW10K 24 Watt Compact Half 10K Day Model Fluorescent Lamp light Half 7100K Actinic Blue We recommend replacing the lamp every 9 12 months due to a decline in intensity which is vital for corals and invertebrates Spectral shifts may also occur that may lead to undesirable al gae growth Removing the Canopy Lid 6g Model Your canopy lid is fastened into 2 hinges located towards the rear of the canopy To remove canopy simply lift the canopy lid at a 90 degree angle from the tank and pull canopy lid towards yourself The canopy lid will unsnap from the hinges on the tank FRONT VIEW EANO CUSC Maintenance 5 Removing the Canopy Lid 12g Original Model Your canopy lid is fastened into 2 hinges located towards the rear of the canopy
10. em that offers daylight and nightlight illumination Turning on the daytime lights amp dual cooling fans I Press the toggle switch back to the double lines to turn on the daylight lamp and cooling fans The toggle switch is lo cated on top of the canopy hood The fans automatically turn on with the daylight lamp TURNING ON YOUR LIGHTING SYSTEM Nite Lite Your Nano Cube incorporates our Nite Vu LED s that simulate nocturnal cycles with very dim blue light nightlights that casts sparkling rays that shimmer for a more natural light cycle com monly found in nature I Press the toggle switch forward to the single line to turn on the Nite Vu LED s 16 EANO CUBC Maintenance Procedures Regular maintenance is the key to a successful thriving aquar ium Maintaining an aquarium can be very easy with a regular cleaning scheaule WATER CHANGES A Water changes should be carried out on monthly to monthly schedule depending on how much bio load is kept B 2596 water changes with gravel vacuuming is essential to keep dissolved organic carbons to a minimum REPLACING THE FILTER SPONGE Chamber1 A Filter Sponge should be changed on a monthly basis to re move trapped debris and free floating particulate matter REPLACING THE ACTIVATED CARBON Chamber2 A Activated Carbon adsorbs dissolved pollutants and removes the yellow discoloration of water and associated odors B Replace Activat
11. f the pump Note Evaporation will occur in the rear filter chamber when using the Modular Surface Skimmer Water top offs should be performed regularly to prevent the heater and pump from running dry I ANO CUBE Heating ADDING A HEATER not included If you wish to keep tropical warm water fish you will need a submersible heater to maintain optimal water temperatures to simulate their natural environment Most tropical fish will need a temperature range between 74 78 F for optimal living condi tions A heater can be placed either in the main body of the Nano Cube behind accessories such as decorations plants or rocks You may also choose to place the heater in the rear chamber HIDING YOUR HEATER POWER CORD Your canopy is installed with an extra black rubber grommet with power cord slot in the rear of the canopy to secure the power cord from cinching between the canopy and tank while opening and closing Remove the black rubber grommet and insert heater power cord Gently squeeze the grommet back into the power cord slot and adjust accordingly making sure to leave enough slack for opening View from back of Canopy lide out from Canopy 15 I ANO CUBE Picture may vary slightly TOGGLE SWITCH Daylight Fan Off Position O Nite Vu LED s TURNING ON YOUR LIGHTING SYSTEM Daytime Your Nano Cube is pre installed with a dual illumination syst
12. o the receptacle or plug A drip oop shown in the Figure at the right should be arranged by the user for each cord con necting an aquarium appliance to a recepta cle The drip loop is that part of the cord be ow the level of the receptacle or the connec tor if an extension cord is used to prevent water travel along the cord and coming in contact with the re ceptacle Continued on pg 4 Important Safety Instructions D Continued from pg 3 If the plug or the receptacle do get wet DON T unplug the cord Disconnect the fuse to the circuit breaker that supplies power to the appliance Then unplug and examine for the pres ence of water in the receptacle E Close supervision is necessary when any appliance is used by or near children F To avoid injury do not contact moving parts or hot parts such as heaters reflectors lamp bulbs and etc G Always unplug an appliance from the outlet when not in use before putting on or taking off parts and before cleaning Never yank the cord to pull plug from the outlet Grasp the plug and pull to disconnect H Do not use an appliance for other than intended use The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing J Make sure an appliance mounted on a tank is securely in st
13. t of the tank is overhanging the stand B Without a Nano Cube Stand Find a leveled surface that can support the weight of the tank water and livestock An average aquarium can weigh 10165 per gallon once filled with water rock gravel and other accessories 2 Do not place in direct sunlight to prevent excessive algae growth and higher water temperatures FILLING THE TANK Always dechlorinate tap water before adding into the aquar ium Always fill with room temperature water Rinse Activated Carbon which is located in the rear filter com partment under the sink for 30 seconds or until water runs Clear Fill tne main body of the Nano Cube until water flows through intake grill into the rear filter chamber Once the rear filter cham ber is full plug in pump power cord into an approved electrical outlet with a fuse or circuit breaker Once pump is on water will flow from the rear filter chamber through the directional flow nozzle into the main body of the ano Cube Adjust accordingly to desired flow position 13 I ANO CUBE Getting Starte ADDING THE MODULAR SURFACE SKIMMER Unpack the Modular Surface Skimmer Included and place in front of intake grill once pump has been turned on The Modular Surface Skimmer will instantly attach and start to surface skim all surface film and floating particles from the water This device should be removed when changing water or be fore turning of
Download Pdf Manuals
Related Search