LED Music Stand Light Pro music stand light user manual
Contents
1. sible dangerous situation that can result in material and environmental damage if it is not avoided th mann MUSIC IS OUR PASSION General information N Warning danger zone th mann MUSIC IS OUR PASSION Safety instructions 2 Safety instructions Intended use This device is intended to illuminate music stands Use the device only as described in this user manual Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only ifthey are supervised or instructed by a person who is responsible for their safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Safety Ensure that children do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices th mann MUSIC IS OUR PASSION 10 Safety instructions WARNING Eye damage caused by high light intensity Never look directly into the light source NOTICE Operating conditions o This device has bee2. Connections in master slave mode th mann MUSIC IS OUR PASSION When you configure a group of devices in master slave mode the first unit will control the other units for an automatic sound activated synchronized show This function is ideal when you want to start a show immediately Connect the DMX output of the master device to the DMX input of the first slave device Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on 18 Connections and operating elements 6 Connections and operating elements Front panel th mann 19 20 Lamp head Flexible double gooseneck Keeps the lamp head in the desired orientation DIMMER MODE Toggles the brightness control between DMX control AUTO and local control MANUAL CW COLOR TEMPERATURE WW Controls the colour temperature Left hand stop warm white right hand stop cold white FUNCTION DISPLAY Display area for device functions music stand light 6 MENU W A ENTER MENU calls the settings menu w scrolls down in menus decreases the displayed value by one A scrolls up in menus increases the displayed value by one ENTER confirms the displayed option or value 7 DIMMER POWER SWITCH Controls the brightness of the lamp head in manual mode turns the device on off 8 Clamping panel to clamp the device to the music stand LED Music Stand Light Pro 21 Connections and operating el
3. For personal consultation please contact our technical hotline If you have any problems with the device the Service A i customer service will gladly assist you music stand light General information 1 2 Notational conventions This manual uses the following notational conventions Letterings The letterings for connectors and controls are marked by square brackets and italics Examples VOLUME control Mono button Displays Texts and values displayed on the device are marked by quotation marks and italics Examples 24ch OFF Cross references References to other locations in this manual are identified by an arrow and the specified page number In the electronic version of the manual you can click the cross reference to jump to the specified location Example See Cross references on page 7 th mann MUSIC IS OUR PASSION General information 1 3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual Signal word Meaning DANGER This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided WARNING This combination of symbol and signal word indicates a pos sible dangerous situation that can result in death or serious injury if it is not avoided NOTICE This combination of symbol and signal word indicates a pos
4. IS OUR PASSION 10 11 Technical specifications 0 eccsssssssssssseecssecsssecssecssscessesssscessscesccssuecesseesuecssscesaeectecesasecsseeesneeess 34 Plug and connection assighMents cccccsssscssscsseesssecsseecssscessecssscesseesnscesseecesceessecsseeesneeessees 35 Protecting the EnvironMent ccc ceccssssssscsssceseecssscsscesseesseecescesssccesccessecsnecesscesseecescesseecsneesasees 36 Troubleshooting ii iaia 37 General information 1 General information This manual contains important instructions for the safe operation of the unit Read and follow the safety instructions and all other instructions Keep the manual for future reference Make sure that it is available to all those using the device If you sell the unit please make sure that the buyer also receives this manual Our products are subject to a process of continuous development Thus they are subject to change th mann MUSIC IS OUR PASSION 1 1 Further information On our website www thomann de you will find lots of further information and details on the following points Download This manual is also available as PDF file for you to download Use the search function in the electronic version to find the topics of SCIARE interest for you quickly i ur online guides provi etailed information on technical basics Online guides Ouro guides provide detailed information on te alba and terms Personal consultation
5. 0 9 All IDs 170 179 ID 17 223 ID 34 240 ID 51 10 19 ID1 180 189 ID 18 224 ID35 241 ID 52 20 29 ID 2 190 199 ID 19 225 ID 36 242 ID 53 30 39 ID3 200 209 ID 20 226 ID 37 243 ID 54 40 49 ID 4 210 ID 21 227 ID 38 244 ID 55 50 59 ID5 211 ID 22 228 ID 39 245 ID 56 60 69 ID 6 212 ID 23 229 ID 40 246 ID 57 70 79 ID 7 213 ID 24 230 ID 41 247 ID 58 80 89 ID 8 214 ID 25 231 ID 42 248 ID 59 90 99 ID9 215 ID26 232 ID 43 249 ID 60 100 109 ID 10 216 ID27 233 ID 44 250 ID 61 110 119 ID 11 217 ID 28 234 ID 45 251 ID 62 music stand light 32 Operating th mann MUSIC IS OUR PASSION 33 8 Technical specifications LEDs Dispersion angle Number of DMX channels Colour temperature Operating voltage supply Power consumption Permitted ambient temperature Protection class Dimensions W x D x H Weight 34 18 x warm white 18 x cold white approx 45 6 approx 2700 K 5200 K DCOV 2A 15W 0 C 40 C IP20 500 mm x 162 mm x 283 mm 2 1 kg music stand light Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip ment so that a perfect light experience is guaranteed Please take our tips because especially in Sound amp Light caution is indicated Even if a plug fits into a socket the result of an incorrect connection may be a destroyed DMX controller a short circuit or jus
6. a comfortable colour temperature between cold white right hand stop and warm white left hand stop 7 3 Main menu Press MENU to activate the main menu Press this button repeatedly to display the respec tively following menu item or use A W to switch between menu items Press ENTER to call the displayed function Use A and W to change the respectively displayed value When the dis play shows the desired value press ENTER 10 seconds after you have changed settings they are automatically saved If you don t press any button for about 25 seconds the device returns to the display of the remaining battery capacity After another 70 seconds the display turns off The set values are retained even when the device is disconnected from the mains power supply th mann MUSIC IS OUR PASSION 26 Operating DMX address Press MENU repeatedly until the display shows Addr and confirm with ENTER Now you can set the number of the first DMX channel to be used by the device DMX address Use A and to select a value between 1 and 512 display shows A001 A512 When the display shows the desired value press ENTER to confirm the selection Setting brightness and colour Press MENU repeatedly until the display shows HANd or Auto What is displayed depends temperature manually on the position of the DIMMER MODE switch M HANd Colour temperature and brightness can be adjust
7. ed manually via rotary controls CW COLOR TEMPERATURE WW and DIMMER POWER SWITCH M Auto Manual control of colour temperature via rotary control CW COLOR TEMPERATURE WW available Brightness is set via DMX control Slave mode Press MENU repeatedly until the display shows SLAU Now confirm with ENTER to set the device in Slave mode SLA is flashing in the display The device is now DMX controlled by another device configured as Master th mann MUSIC IS OUR PASSION 27 Operating Dimmer mode ID assignment Colour test cold warm white th mann MUSIC IS OUR PASSION Press MENU repeatedly until the display shows g 7 Press ENTER to subsequently use A Y to switch the Dimmer mode on or off When the dimmer mode is enabled the inputs for brightness and colour temperature via the rotary controls will be executed with a slight delay when the dimmer mode is off the inputs are executed directly Press MENU repeatedly until the display shows Id and confirm with ENTER Now you can use A and W to assign the desired ID number for DMX operation between 7 66 to the device You should also read the chapter Chapter 7 5 Functions in 6 channel DMX mode on page 31 Or select off when the unit is not to be controlled by DMX This setting is only relevant for DMX operation Press MENU repeatedly until the display shows 425 and confi
8. ements Rear panel th mann 22 Thumb screws for locking the music stand lamp Clamping jaws to clamp the device to the music stand DMX OUT DMX output to feed the DMX signal to the next device in the DMX chain DMX IN DMX input for the DMX controlled brightness control 9V Connector for power supply via included mains adapter LED Music Stand Light Pro 23 Operating 7 Operating 7 1 Starting the device in mains operation th mann MUSIC IS OUR PASSION Connect the cable of the mains adapter to the 9V socket on the rear panel of the device Then connect the mains adapter to a power outlet Rotate the control DIMMER POWER SWITCH clockwise past the resistance to turn the device on The device is then ready for use O When turning on the device in manual mode switch DIMMER MODE is in J MANUAL position HANd lights in the display Colour temperature and bright ness can then be adjusted using the two rotary controls i When turning on the device in auto mode switch DIMMER MODE is in AUTO position Auto lights in the display You can then only adjust the colour temper ature using the CW COLOR TEMPERATURE WWI control but not the brightness If you want to control the brightness yourself the switch DIMMER MODE must be in MANUAL position Otherwise the brightness is adjusted via DMX control Rotate the control DIMMER POWER SWITCH clockwise to increase the brightne
9. io devices such as mixers or ampli fiers In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting th mann MUSIC IS OUR PASSION 37 38 Symptom The unit does not work no light No response to the DMX con troller Remedy Check the mains connection and the fuse 1 Check the DMX ports and cables for proper connection 2 Check the address settings and the DMX polarity 3 Try using another DMX controller 4 Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer ence to DMX interface circuits If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de music stand light Musikhaus Thomann Hans Thomann Stra e 1 96138 Burgebrach Germany www thomann de
10. n designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations th mann MUSIC IS OUR PASSION 11 Safety instructions th mann MUSIC IS OUR PASSION NOTICE External power supply The device is powered by an external power supply Before connecting the external power supply ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual cur rent circuit breaker Failure to do so could result in damage to the device and pos sibly the user Unplug the external power supply before electrical storms occur and when the device is unused for long periods of time to reduce the risk of electric shock or fire 12 Features 3 Features This LED lamp is ideal for professional lighting tasks on music stands The device is characterized by 50 cm wide lamp head Even illumination with flicker free light Dimmer function Colour temperature of approx 2700 K 5200 K adjustable directly on the lamp DMX controllable Flexible double gooseneck Built in rechargeable battery for approx 3 5 operating hours maximum Low power consumption Shock proof Incl power supply with Euro plug Black metal housing th mann MUSIC IS OUR PASSION 13 Installation 4 Installation Unpack and carefully check that there is no transportation damage before using the u
11. nit Keep the equipment packaging To fully protect the device against vibration dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage respectively NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers Mounting the lamp If required loosen the thumbscrews to lock the music stand lamp so far that the surface on which you want to clamp the lamp fits between clamping panel and jaws Then put the lamp on this surface and tighten the thumbscrews again until the lamp stays securely in place th mann MUSIC IS OUR PASSION 14 Installation themann 15 Starting up 5 Starting up Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections th mann MUSIC IS OUR PASSION 16 Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device Connect the output of the first DMX device to the input of the second one and so on to form a daisy chain Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor 1100 1 4 W th mann MUSIC IS OUR PASSION 17 Starting up
12. rm with ENTER With this function you can specify an illumination that can no longer be adjusted using the rotary con trols This may be useful to prevent accidental changes to the illumination settings Use A and W to select the setting Cy activates the cold white LEDs Vy activates the warm white LEDs or CYVYV activates both cold and warm white LEDs Use the DIMMER POWER SWITCH control to adjust the desired brightness and press ENTER to save this setting Now you can no longer change the illumination using the rotary controls until you press MENU again 28 Operating Showing software version Press MENU repeatedly until the display shows uEr and confirm with ENTER Press ENTER to display the software version used by the device th mann MUSIC IS OUR PASSION 29 Operating 7 4 Menu overview HAMA Aluko SLAB GLAO th mann MUSIC IS OUR PASSION 30 7 5 Functions in 6 channel DMX mode DMX channel 1 Value 0 255 0 255 0 255 Function 0 Off 1 250 Master Dimmer Setting cold white LEDs from low to high Setting warm white LEDs from low to high 0 1 No function default 2 240 Setting colour temperature of LEDs 241 255 Optical sensors for Auto dimmer LED Music Stand Light Pro 31 DMX Value Function channel 5 0 255 0 255 Setting colour temperature when Optical sensors is selected for channel 4 6 0 25
13. ss Turn it counter clockwise to decrease the brightness 24 Operating Align the lamp head as desired Then rotate the control CW COLOR TEMPERATURE WW to adjust a comfortable colour temperature between cold white right hand stop and warm white left hand stop 7 2 Starting the device in battery operation If there is no mains power available on site you can also power the device using the built in rechargeable battery For this the battery needs to be charged before Connect the cable of the mains adapter to the 9V socket on the rear panel of the device Then connect the mains adapter to a power outlet Charging starts A full charge takes about 2 5 hours and is sufficient for about 3 5 operating hours O During charging the lighting may be switched on or off With the lights on the 1 charging time may increase After charging is complete rotate the control DIMMER POWER SWITCH clockwise past the resistance to turn the device on The device is then ready for use th mann MUSIC IS OUR PASSION 25 Operating If you want to control the brightness yourself the switch DIMMER MODE must be in MANUAL position Otherwise the brightness is adjusted via DMX control Rotate the control DIMMER POWER SWITCH clockwise to increase the brightness Turn it counter clockwise to decrease the brightness Align the lamp head as desired Then rotate the control CW COLOR TEMPERATURE WW to adjust
14. t a not working light show DMX connections The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing and table below for the pin assignment of a suitable XLR plug th mann MUSIC IS OUR PASSION 35 Protecting the environment 10 Protecting the environment Disposal of the packaging mate rial Disposal of your old device th mann MUSIC IS OUR PASSION For the transport and protective packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose of these materials with your normal household waste but make sure that they are collected for recycling Please follow the notes and markings on the packaging This product is subject to the European Waste Electrical and Electronic Equipment Directive WEEE Do not dispose with your normal household waste Dispose of this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility 36 Troubleshooting 11 Troubleshooting NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to aud
15. themann LED Music Stand Light Pro music stand light themann user manual MUSIC IS OUR PASSION Musikhaus Thomann Thomann GmbH Hans Thomann Stra e 1 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 20 08 2015 ID 330169 SW 1 1 Table of contents na vu A A WUN Table of contents General informatiOn cccccccessssssessesssssssssssssssessessscssesssssscessessesessecsecsseeseesesssssucancsaessucsseeseeseeneenses 5 1 1 Further information 1 2 Notational conventions 7 1 3 Symbols and signal WOrdS ssscsssscsssecseecsssccsnesesssccsseesssecsssecsescessseesasccsssecesceesacecsneessneeesneeesaeeeses 8 Safety instructions lai 10 Se 13 Installation RR SA ARRE RE RES 14 Starting UPa I An 16 Connections and operating elemeEntS csorcrsccrscersesceesesseieeneieonesiezeseezeenoe 19 Operating Giani A A E TT 24 7 1 Starting the device in MAINS operation uansseensssennessennssennnnsennunsennunsennnnsennnnseennnnsennnnee 24 7 2 Starting the device in battery Operation esesscssecseecsssssseesseecsseeessecsseeseecsscesseesseeesseessees 25 7 3 MaluimMenUzcrio ara 7 4 Menu overview 7 5 Functions in 6 channel DMX mode uusenseensseonssseunssennnssennnnennnnsennnnssnnnsennnnssnnnnssennsennnnee 31 th mann MUSIC IS OUR PASSION Table of contents th mann MUSIC
Download Pdf Manuals
Related Search