White Star Sky II DMX V4
Contents
1. Never use the device during thunderstorms unplug the device immediately Do not shake the device Avoid brute force when installing or operating the device The Star Sky 2 reacts very sensitive to force Only use device indoor avoid contact with water or other liquids Do not touch the Star Sky 2 bare handed during its operation Only operate the device after having familiarized with its functions Avoid flames and do not put close to flammable liquids or gases Always allow free air soace of at least 50 cm around the unit for ventilation Always disconnect power from the mains when device is not used or before cleaning Only handle the power cord by the plug Never pull out the plug by tugging the power cord Make sure that the device is not exposed to extreme heat moisture or dust Make sure that the available volfage Is not higher than stated on the rear panel Make sure that the power cord Is never crimped or damaged Check the device and the power cord from time to time Make sure that the cable diameter of the extension cords and powercables are sufficient for the current consumption of the device The powercable may not be modified broken mechanically strained pressed together or heated The cable insert or the female part in the device must never be strained There must always be sufficient cable to the device Otherwise the cable may be damaged which may lead to deadly electrical shocks If the external cable is damaged2. White Star Sky Il DMX va ORDERCODE 40342 Congratulations You have bought a great innovative product trom Showtec The Showtec Star Sky 2 brings excitement to any venue You can rely on Showtec for more excellent lighting products We design and manufacture professional light equipment for the entertainment industry New products are being launched regularly We work hard to keep you our customer satisfied For more information want showtec into You can get some of the best quality best priced products on the market from Showtec So next time turn to Showtec for more great lighting equipment Always get the best with Showtec Thank you Showtec Showtec Star Sky 2 Product Guide Warning sone sede days tose ee Safety instructions ORC One Ce iGO ASP FRO RC cess parece aeoe tae ete soca do eadanatessecapenass E sek ado ruhe susie pia viaiuausonenaionencuctdoneettienduetionbestieses Return Procedure Claims SS Nn dodo SD sas os hows enin wees troeesed Set Up and e DMX Channels Controller an DMX Dip Switch Value Guide ONNO Maintenance ie Replacing the Fuse O0 Troubleshooting No Light No Response to DMX O PROUT SSC ING NOUNS oecon E E OTE EE WARNING FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP Unpacking Instructions Immediately upon receiving this product carefully unpack the carton and check the co
3. if has to be replaced by a qualified technician If the Star Sky 2 is obviously damaged if has to be replaced So that its functions are not impaired Never hit the lighting cloth with a hammer or other tools as this may lead to damaged the Leds Never operate the device in the packaging or wrapped in order to avoid heating up This lighting cloth can be electrically connected with another cloth If device Is dropped or struck disconnect mains power supply immediately Have a qualified engineer inspect for safety before operating If the device has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until if has reached room temperature If your Showtec device fails to work properly discontinue use immediately Pack the unit securely preferably in the original packing material and return if fo your Showtec dealer for service For adult use only Lighteffect must be installed out of the reach of children Never leave the unit running unattended Allow time to cool down before storing the cloth in the bag The user is responsible for correct positioning and operating of the Star Sky 2 The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device This device falls under protection class Therefore if is essential to connect the yellow green c
4. fo use Note If you are given an RMA number please include the following information on a piece of paper inside the box 1 Your name 2 Your address 3 Your phone number 4 A brief description of the symptoms Claims The client has the obligation to check the delivered goods immediately upon delivery for any short comings and or visible defects or perform this check after our announcement that the goods are at their disposal Damage incurred in shipping is the responsibility of the shipper therefore the damage must be reported to the carrier upon receipt of merchandise It is the customer s responsibility to notify and submit claims with the shipper in the event that a fixture is damaged due fo shipping Transportation damage has to be reported fo us within one day after receipt of the delivery Any return shioment has fo be made post paid at all times Return shioments must be accompanied with a letter defining the reason for return shipment Non prepaid return shioments will be refused unless otherwise agreed in writing Complaints against us must be made known in writing or by fax within 10 working days after receipt of the invoice After this period complaints will not be handled anymore Complaints will only then be considered if the client has so far complied with all parts of the agreement regardless of the agreement of which the obligation is resulting Description of the device Features The Showtec Star Sky 2 is a ligh
5. oe Gn ie Output Mic Programs Speed Control LED CURTAIN C 1 Output 5 DMX IN 2 Microphone 6 DMX OUT 3 Programs All On Sound Active Auto Fade 7 Dip Switches 4 Speed Control DMX Dip Switch Value Guide DMX products must have their own address to receive DMX signals Addresses on the controller are set by flipping the appropriate DMX Dip switches A op op on ob eb ob oe oe Dip Switch no 1 2 3 5 6 7 8 9 10 Starting address 1 2 4 8 16 32 64 128 256 512 You need to know that DMX address settings are the sum of the dip switch values A standard DMX address for a Showtec Star Sky which has 5 channels is as follow Example Star Sky Address Value DMX Dip Switches ON Unit 5 21 1 3 5 Switch Value 1 3 4 5 16 Total sum 21 Explanation Since each unit has 5 channels each address advances 5 values See Address Value above Once address values are determined add DMX dip switch values to obtain the appropriate address DMX Dip Switches ON for each unit Flib appropriate DMX dip switches on each unit Maintenance The Showtec Star Sky 2 requires almost no maintenance However you should keep the unit clean Otherwise the fixture s light output will be significantly reduced Disconnect the mains power supply and then wipe the cover with a damp cloth Do not immerse in liquid The housing will require monthly cleaning as smoke fluid tends fo build up residues reducing the li
6. to lighted object 1m Design and product specifications are subject to change without prior notice CE Website www Showtec info Email service highlite nl 2011 Showtec
7. er be fixed swinging freely in the room e When rigging derigging or servicing the device always make sure that the area below the installation place is blocked and staying in the area is forbidden Improper installation can cause serious damage fo people and property Connection with the mains Connect the device to the mains with the power plug Always pay attention that the right color cable is connected to the right place International EU Cable UK Cable US Cable BROWN YELLOW COPPER FASE BLUE BLACK SILVER NUL YELLOW GREEN GREEN GREEN EARTH Make sure that the device is always connected properly to the earth Es A Return Procedure A Returned merchandise must be sent prepaid and in the original packing call tags will not be issued Package must be clearly labeled with a Return Authorization Number RMA number Products returned without an RMA number will be refused Highlite will not accept the returned goods or any responsibility Call Highlite 0031 455667723 or mail aftersales highlite nl and request an RMA prior to shipping the fixture Be prepared to provide the model number serial number and a brief description of the cause for the return Be sure to properly pack fixture any shipping damage resulting from inadequate packaging Is the customer s responsibility Highlife reserves the right to use its own discretion fo repair or replace product s As a suggestion proper UPS packing or double boxing is always a safe method
8. ght output very quickly Do not use alcohol or solvents Keep connections clean Disconnect electric power and then wipe the connections with a damp cloth Make sure connections are thoroughly dry before linking equipment or supplying electric power The operator has to make sure that safety relating and machine technical installations are to be insoected by an expert after every four years in the course of an acceptance test The operator has to make sure that safety relating and machine technical installations are to be insoected by a skilled person once a year The following points have to be considered during the inspection 1 All screws used for installing the device or parts of the device have to be tightly connected and must not be corroded 2 There may not be any deformations on housings fixations and installation spots 3 The electric power supply cables must not show any damages or material fatigue Replacing a Fuse Power surges short circuit or inappropriate electrical power supply may cause a fuse to burn out If the fuse burns ouf the product will not function whatsoever If this happens follow the directions below to do SO 1 Unplug the unit from electric power source 2 Insert a flat head screwdriver into a slot in the fuse cover Turn the screwdriver to the left at the same time gently push a bit Turn and Push The fuse will come out 3 Remove the used fuse If brown or unclear if is burned out 4 Insert t
9. he replacement fuse into the holder where the old fuse was Reinsert the fuse cover Be sure to use a fuse of the same type and specification See the product specification label for details 8 Troubleshooting No Light This troubleshooting guide is meant to help solve simple problems If a problem occurs carry out the steps below in sequence until a solution is found Once the unit operates properly do not carry out following steps If the light effect does not operate properly refer servicing to a technician Response Suspect two potential problem areas the power supply the LEDs 1 Power supply Check that the unit is plugged info an appropriate power supply 2 The LED Return the device to your Showtec dealer No Response to DMX Response Suspect the DMX cable or connectors a controller malfunction a light effect DMX card malfunction 1 Check the DMX cable Unplug the unit change the DMX cable then reconnect to electrical power Try your DMX control again 2 Determine whether the controller or light effect is at fault Does the controller operate properly with other DMX products If not fake the controller in for repair If so take the DMX cable and the light effect to a qualified technician Product Specification Model Showtec Star Sky 2 Power supply 240V 50Hz CE 192 LEDs Fuse 2A Length 6m Width 3m Weight 5 kg Minimum distance Minimum distance from flammable surfaces 0 5m Minimum distance
10. nance of this device has to be qualified follow the instructions of this manual CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires Before your initial start up please make sure that there is no damage caused by transportation Should there be any consult your dealer and do not use the device To maintain perfect condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual Please consider that damages caused by manual modifications to the device are not subject to warranty This device contains no user serviceable parts Refer servicing to qualified technicians only IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorized modification to the device Never let the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Never remove warning or informative labels from the unit Never use anything to cover the ground contact Never look directly into the light source Do not open the device and do not modify the device Never leave any cables lying around Do not connect this device to a dimmerpack Do not switch the device on and off in short intervals as this would reduce the LEDs life
11. ntents fo ensure that all parts are present and have been received in good condition Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton Itself shows signs of mishandling Save the carton and all packing materials In the event that a fixture must be returned to the factory if is important that the fixture be returned in the original factory box and packing Your shipment includes e Showtec Star Sky 2 with IEC powercable 1 5m e special 5 pin to 3 pin XLR cable 0 9m e User manual LED Expected Lifespan LEDs gradually decline in brightness over time HEAT is the dominant factor that leads to the acceleration of this decline Packaged in clusters LEDs exhibit higher operating temperatures than in ideal or singular optimum conditions For this reason when all color LEDs are used at their fullest intensity life of the LEDs is significantly reduced It is estimated that a viable lifesoan of 40 000 to 50 000 hours will be achieved under normal operational conditions If improving on this lifesoan expectancy is of a higher priority place care in providing for lower operational temperatures This may include climatic environmental and the reduction of overall projection intensity CAUTION Keep this device away from rain and moisture Unplug mains lead before opening the housing SAFETY INSTRUCTIONS Every person involved with the installation operation and mainte
12. onductor fo earth During the initial start up some smell may arise This is a normal process and does not necessarily mean that the device is defective Repairs servicing and electric connection must be carried out by a qualified technician For replacement use fuses of same type and rating only WARRANTY Till one year after date of purchase Avoid looking directly into the light source meant especially for epileptics CAUTION EYEDAMAGES OPERATING DETERMINATIONS This device is not designed for permanent operation Consistent operation breaks will ensure that the device will serve you for a long time without defects The minimum distance between light output and the illuminated surface must be more than 1 meter The maximum ambient temperature ta 45 C must never be exceeded The relative humidity must not exceed 50 with an ambient temperature of 45 C If this device is operated in any other way than the one described in this manual the product may suffer damages and the warranty becomes void Any other operation may lead to dangers like short circuit burns electric shock crash etc You endanger your own safety and the safety of others Rigging Please follow the European and national guidelines concerning rigging trussing and all other safety Issues Do not attempt the installation yourself Always let the installation be carried out by an authorized dealer Procedure e The Star Sky 2 must nev
13. t effect with great effects e Total width 6m total length 3m e DMX controller carrying bag included e 7 DMX Channels e 2 Versions available White LEDs 40342 or Coloured LEDs 40343 e 192 LEDs Overview Fig 1 Set Up and Operation Follow the directions below as they pertain to your preferred operation mode Before plugging the unit in always make sure that the power supply matches the product specification voltage Do not attempt to operate a 120V specification product on 230V power or vice versa Damages caused by non observance are not subject to warranty DMX Protocol 7 Channels Channel 1 Built in Programs Dimmer only works for CH4 7 If CH1 is 61 255 then CH4 5 6 7 do not function Flash Auto Shift Fade Sound controlled 61 120 121 180 181 240 241 255 Channel 2 Program Speed when CH1 is set between 61 240 0 20 21 255 Stop built in program speed from CH Channel 3 strobe Speed Dimmer of Channel 4 5 6 or 7 must be open 0 20 21 255 Stop Strobe Speed of LED group 1 2 3 and 4 Channel 4 Dimmer intensity LED Group 1 0 255 From black to brightest Channel 5 Dimmer intensity LED Group 2 0 255 From black to brightest Channel 6 Dimmer intensity LED Group 3 0 255 From black to brightest Channel 7 Dimmer intensity LED Group 4 0 255 DMXIN DMX OUT From black to brightest Controller Sound Active All On Auto ling Fade S CA wr 1 i
Download Pdf Manuals
Related Search