PROGRAMMING MANUAL
Contents
1. 03 46 01 01 10 HOURS 03 Set time 5 03 46 01 01 10 46 03 46 01701710 Press to end subsequently press to save to cancel SECONDS 00 CONFIRM OUTPUT SAVE EXIT W internal clock is not initialised the key pad displays the message INITIALISE DATE AND TIME and the breakdown Led is on Once the clock has been initialised the Led switches off and the message will be cleared from the key pad Use the arrow key to select the parameters to edit and with the keys edit the value Page 32 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this _ 2 19 Factory settings 08 23 16 05 10 123456 ENTER CODE STANDING BY USER MENU DEFAULT PARAMETERS DEFAULT PARAM 2 YES ESC ARE YOU SURE A YES ESC DEFAULT PARAMET RUNNING RESTORE CODES YES ESC ARE YOU SURE A YES ESC RESTORE CODES EXECUTING RESTORE KEYS YES ESC ARE YOU SURE A YES ESC CONTROL UNIT 2m VERSION E the default parameters don t delete codes keys already in memory To delete this items it s necessary to enter in the spe2. EVENTS MENU 001 Activate Events item on user menu Default ENABLED Activates code to accede to the Events item on the user menu POSTP MENU 001 Activate Extension item on user menu Default ENABLED Activates code to access to the Extension item on the user menu Activate Events item on user menu Default __2NABLED_ ENABLED HFE Activates code to access to the Telephony item on the user menu Activate Events item on user menu Default ENABLED FF Activates code to access to the Code item on the user menu Activate the Manage Code user menu item Default ENABLED 1 ENABLED Activates code to access to the Managing Codes item on the user menu Activate the Manage Keys user menu item Default KEY MGMT MEN 001 x Activates code to access to the Managing Keys on the user menu User code description For editing the User code description CHANGE 001 Edit technical code For editing the user code default user 1 123456 Page 25 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at a
3. Alarm buzzer Default ves 5 For activating deactivating the buzzer during the control unit s alarm time Inserter description For editing the inserter description ENGLISH ENGLISH 2 7 Inputs INPUTS 11 MODIFY INPUT 001 INPUT 01 STATUS 001 EXCLUDED TYPE 001 IMMEDIATE Status Default EXCLUDED Inputs are excluded when they are unused Inputs are inserted when they are used in the system An input is a test when you want to monitor the behaviour of an input via the events log without triggering any alarms nor telephone calls Example following installation of a system the input continues to revert to alarm without any apparent reason By placing it into test mode you can continue to monitor any alarms though the events log without generating any alarms Type Default IMMEDIATE The type defines the input s functional characteristics This is a classic intruder proof input active when the control SERVICE BLCK PRG IN DELAYED 01 DELAYED 02 TECHNIC unit is up and inactive when the control unit is off If unbalanced it triggers a general alarm Example Installing a magnetic radio contact onto a window It is active with control unit engaged or d
4. Output buzzer Default xes For activating deactivating the buzzer during the exit time Alarm buzzer Default ves SN For activating deactivating the buzzer during the control unit s alarm time Keypad description For editing the keypad description Page 10 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page 11 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation BRAHMS s part to notify anyone of this 2 6 Inserters INSERTERS MODIFY INSERT 01 KEY READER 01 ASSOC AREAS 01 Associated areas Defaut E s Al The associated areas are those manageable by the inserter These also represent an AND type filter on the areas managed by the code or by the scenario Example An apartment with a ground floor shop The business owner wants to manage both home and shop with the same key Area 1 HOME Area 2 SHOP Scenario 1 CLOSE HOME SWITCH ON SELECT AREAS areas Scenario 2 CLOSE SHOP SWITCH ON SELECT AREAS areas Inserter 1 Home location assoc
5. COMMAND OUTPUT Example check whether the system is on or off through an input In the output Association menu assign the switching on status of the areas to one stable programmed output and with zero second delay on activation and deactivation times Page 17 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this ENGLISH ENGLISH SECURITY 001 001 SLAVE OUTPUT 001 NO LABEL OUTPUT 2 9 Times AUTOTEST TIME 0 255 HRS 000 BATTER TEST TIME 0 255 MIN 060 Security Default NEGATIVE S The output is normally deactivated and is activated when it is commanded Example connecting a relay to an open collector output to SECURITY NEGATIVE the relay will be normally de energised and will energise only when the output is closed The output is normally active and is deactivated when it is commanded Example connecting a relay to an open collector output to SECURITY POSITIVE the relay will be normally energised and will de energise only when the output is closed Remote activation Default 5 if activated YES it lets you remotely activate the output voice guide sms or Example we want to ac
6. brahms 5 SECURITY ALARM CONTROL UNIT DrOHINETS PROGRAMMING MANUAL English ENGLISH INDEX 1 SYMBOLS AND GLOSSARY 2 TECHNICAL MENU ACCESSING THE TECHNICAL MENU 2 1 PROGRAMMING MODE MENU ITEMS BELONGING TO OTHER MODES EASY MODE STANDARD MODE ADVANCED MODE 2 2 INSTALLATION EDIT SYSTEM REMOTE KEYPAD ADDRESSING ADDRESSING REMOTE INSERTERS SYSTEM TEST BUS RS485 PXLAN PXWEB CONFIGURATION 2 3 SCENARIOS 2 4 AREAS 2 5 KEYPADS 2 6 INSERTERS 2 7 INPUTS 2 8 OUTPUTS 2 9 TIMES 2 10 TELEPHONE NOTIFICATIONS 2 11 ASSOCIATING OUTPUT 2 12 CODES 2 13 KEYS 2 14 TELEPHONES 2 15 TELEPHONE OPTIONS 2 16 SPECIAL FUNCTIONS 2 17 SCHEDULER 2 18 EVENTS 2 19 CLOCK 2 20 DEFAULT PARAMETERS 3 EVENTS MESSAGING PAGE 33 4 REFERENCE LAWS PAGE 36 5 DECLARATION PAGE 36 1 Symbols and glossary A This symbol indicates the parts which describe safety issues X This symbol indicates parts which must be read with care e Permanently on warning light o Warning light off e Rapidly flashing warning light INSTALLER any person or business responsible for designing and installing the system USER any persons using the security alarm system Page 2 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page Programming Manual 24805480 29 11 2013 319F92C ve
7. It determines every how minutes the control unit should automatically perform BATTERY DYNAMIC TEST If the value is set to 0 the test is deactivated In case the battery is rundown the breakdown led indicator light flashes and keeps flashing until the next test also you can also either associate an output or a remote communication Note the breakdown status remains active until the next BATTERY TEST To remove the breakdown status following battery replacement perform a manual BATTERY TEST from the technical menu Page 18 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page 19 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this DELAY POWER OFF 0 255 MIN 060 GENERAL ALARM 0 255 SEC 090 SABOTAGE 0 255 SEC 090 TECHN ALARM 0 255 SEC 090 BURGLR ALARM 0 255 SEC 000 BUZZER OUTPUT 0 255 SEC 000 EXIT TIME 0 255 SEC 050 ENTRANC1 TIME 0292255 5 1030 2 0 255 SEC 040 Missing network notification delay Default s It determines every how often the LACK of ELECTRIC POWER is considered an an
8. For associating a key to a group KEY 991 For editing the key description Page 26 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page 27 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation BRAHMS s part to notify anyone of this 2 14 Telephones TELEPHONES ATTEMPTS 01 0 10 TRIES 02 COMMON MSG MESSAGE LABEL TELEPHONE 01 01 Telephone number Edit telephone number Pressed the key with the keys amp H you write the numbers and confirm with and cancel with keys To deactivate the number just cancel it completely Besides the numbers you can also enter the letters C PBX and P pause when dialling which are respectively used for the following functions C In case of GSM calls all numbers prior to C will not be dialled P to insert a pause during the dialling The C and are respectively selected using the and Bl keys To insert a telephone numberfrst select the number to insert press the key digit the numbers using the keys 2 Then finish with the key Example PSTN li
9. E BIB DISABLED If enabled every time a radio device is lost the signal is triggered cyclically when the time set in the supervision window is up Description of assistance and company Default EA Here you can enter the name of the installing firm that will appear on the user menu below the INFO item 2 17 Programmer The control unit features a simple weekly scheduler Each programme features 20 steps For each step it is possible to set the starting HOUR and ACTION to carry out Each programmed step will be automatically carried out by the control unit ONLY WHEN IT COINCIDES WITH THE SET TIME HOURS AND MINUTES If for any reason a step programmed for a specific time is not carried out this step will no longer be carried out within the same day There is no need to follow an increasing time sequence when setting the steps A IMPORTANT it is vital to pay careful attention in choosing the action to be automatically carried out by the steps because if wrongly programmed they can generate unwanted results in the control unit Programme step Default activate edit a programme step press and the action and set the action disable a programme step press ES ESSI The programme step is activated with the following programming HH mm hour and minutes action address S status P extension To see
10. PSTN line down unsuccessful SIM log on etc Use the I H keys to set the phone numbers ENGLISH ENGLISH PHONE NOT MENU 07 CODE ENTERING ENTER CODE 001 08 KEY ENTERING ENTER KEY PHONE NOT MENU 09 INPUTS ALARM Inserting code Telephone notifications associated to keypad access code insertions Use H EO to select the codes Use the vo keys to set the phone numbers Inserting key Telephone notifications associated to key insertions on inserters Use E to select the keys Use the HH keys to set the phone numbers Activating and restoring generic alarm of single inputs Telephone notifications associated to both activation and restoration of single inputs generic alarm Use 7 to select the inputs Use the keys to set the phone numbers Autotest Telephone notifications associated to the system s autotest for notifying the system is up and running JA Use the keys
11. SWITCH ON SELECT AREAS areas Scenario 2 CLOSE OFFICE 2 areas Keypad 1 Located 1 associated areas 4 4 scenario A CLOSE OFFICE 1 Keypad 2 Located in 2 associated areas scenario A CLOSE OFFICE 2 Code 1 Office 1 User associated areas Code 2 Office 2 User associated areas Area description For editing the area description ENGLISH ENGLISH 2 5 Keypads MODIFY KEYPAD 01 KEYPAD 01 SCENARIOS 01 MODIFY LIST SCENARIO GOING OUT ENTRY BUZZER YES EXIT BUZZER 01 YES ALARM BUZZER YES 01 01 Keypad type Default 222 5 Menu visible addresses from 02 onwards makes it possible to choose whether the keypad is type LCD PXKWD PXKTB or PXKTN or type LED PXKIB or PXKIN A Associated areas 5 The associated areas are those manageable and displayed by the key panel These also represent an AND type filter on the areas managed by the code or by the scenario Example An apartment with a ground floor shop in common The owner wishes to manage the store and apartment under the same code with the opportunity to manage the store from home Area 1 HOME Area 2 SHOP Scenario 1 CLOSE HOME SWITCH ON SELECT
12. The same settings of the EASY and STANDARD modes plus e Customised keypad specific voice messages Advanced programming inputs codes keys telephones telephone options special functions Advanced programming of telephone functions Time calendar scheduler Past Events print out gt lt gt lt gt lt gt lt Page 4 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation BRAHMS s part to notify anyone of this 2 2 Installation The system menu is for defining the system components areas keypads inserters which employed to perform a series of tests For programming move to the subsequent menu items MODIFY SYSTEM MODIFY SYSTEM Managed areas Defaut E id MANAGED AREAS Use the H 7 keys to enable the areas managed in the system The system is H totally inserted when all of the selected areas are switched on Example if you only have three areas day zone night zone and perimetral zone sertti Keypads Defaut Use the E keys to enable the keypads used 4 Example if you want to use 4 keypads on the system set innt Inserters mee Sed Use the Iv H E keys to activate the inserters being used Example if
13. SMSs voice messages CONTACT IDs STOP FROM CODE NONE FE Stop sequence of code key insertion calls Default s al If an event i e general technical sabotage alarm etc sets off a cycle of telephone calls it can be interrupted by entering either a code or key on the keypad associated to the areas of competence with area switching off properties Events such as general technical or sabotage alarms and so on trigger a cycle of phone calls this CANNOT be interrupted once it has started by neither codes nor keys which are associated to areas of competence having area switch off properties LINE PRIORITY PSTN Priority telephone calls Default 2577 5 The priority allows to select the type of predefined network between the PSTN or GSM lines for voice calls In case the combiner does not find the predefined network all voice calls will be rerouted to the secondary network SMS messages are always sent on the GSM line Digital calls are carried out only on the PSTN line Voice calls via PSTN telephone line Voice calls via GSM Activate SMS telecontrol Default For activating SMS based telecontrol PSTN RMT CTRL YES SKIP ANSWER SERV YES PSTN RINGS 15151805 Activate PSTN voice guide telecontrol Default xzs For
14. activating access to the voice guide via PSTN line Skip answer service Default ves Activated if PSTN TELECONT is set to YES for accessing the voice guide even when there is a programmed answering service to answer before the combiner If set to YES you call the home number and hang up at the first ring repeat the call in the next 60 Rings from PSTN Default L 95 Al Activated if PSTN TELECONT is set to YES for set the number of rings after which the combiner will respond Example 1 a house without answering machine and we want combiner answer after 6 rings Telephone options Telecontrol from PSTN ves Skip answer service Rings from PSTN os Example 2 we have a home that has an answering machine that switches on after 5 rings Telephone options Telecontrol from PSTN Skip answer service xs Page 28 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Activate PSTN telecontrol by the INSTALLER PSTN REM ASSIST perau Dt For activating remote access to the programming via PC on the PSTN line GSM RMT CTRL Activate GSM telecontrol Default gt For activating access to the voice guide GSM line Secure GSM Default By activating the GSM tele
15. itis not associated to an area s technical input the system technical alarm is not generated GEN SYS ALA The generic general alarm event is gener ated with either an area alarm or a system tamper alarm PWR BRK DN xx CONT UNIT PWR DESCR Control unit power supply fuses break down notification The event is logged when the control unit is powered up for the first time or it is reset the re start button is pressed on the con trol unit s board 24H SYS ALA RES 24H SYS Generic notification of tamper alarm sab otage AREA DESCR Whenan inputis in tamper state also the as sociatedareas gointosabotage alarm mode All tamper type events which are not as sociated to any inputs automatically trig ger a tamper alarm of area 1 REMOTE CONTROL xx REMOTE CONTROL DESCR Each time you act on the system s remote control this is logged in the events log REMOTE N xxx CODE CODE DESCR Entering a code e g user from remote either voice guide or sms is logged in the events log B it g IRES TEC ALA xx AREA DESCR When an input goes into alarm mode also the associated areas go into technical alarm mode ENGLISH ENGLISH Telephone notifications group ACTIVATION RESTORE DESCRIPTION 2 Sabotage Technical Burglary Switching on Out of order When an input goes into alarm mode also BURGLARY ALA x
16. just on some AREAS TO TEST 0 TEST Control unit tamper test TEES For checking the control unit tamper status selected areas Control unit battery test ZCOIARTICIEST For promptly checking control unit battery status SENENSUSEUT Siren test l START TEST For manually commanding the alarm relay output of the control unit Output test OUTPUTS TEST The test allows you to control the status of the system inputs BUS 15485 BUS RS485 connection speed BAUD RATE 85485 Allows configuration of the BUS RS485 speed from the following 115 200 38 400 8 600 default 4 800 2 400 Page 6 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page 7 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this PXLAN PXWEB CONFIGURATION PXWEB PXLAN CONFIGURATION PXWEB PXLAN DHCP YES NO Network board automatic ad
17. may be changed at any time with no obligation on BRAHMS s part to notify anyone of this 2 8 Outputs OUTPUTS 12 MODIFY OUTP 001 OUTPUT 01 TYPE 001 STABLE Status Default STABLE SH STABLE the output s activity follows the status of the associated event Example the output is activated by the OPEN condition of the associated input the output s activity is determined by the associated event but only for a certain time the duration of which is selectable IMPULSE TIME 001 0 255 SEC 000 Parameter viewable only if the output is an impulsive one Activation duration Default 000 Duration time of the impulsive output activation Duration time activation Example opening a door lock via code An impulsive output is associated to a code with a 3 second activation time ARMING DELAY 001 0 255 SEC 000 DISARM DELAY 001 0 255 SEC 000 Parameters viewable only if the output is a stable one Activation delay Default Delayed time between the activation command and the output s activation Deactivation delay Default 000 S A Delayed time between the deactivation command and the output s deactivation STATUS OUTPUT Del Eng l Del Dis
18. on the system you want to use 2 inserters MITHO TOUCH PRU Touch mito oou E With FE cursors it s possible to enable disable the communication with the BPT home automation system NOTE The communication between Brahms and BPT home automation system it available if the Proxinet has a firmware 1 0 16B4 or higher Page 5 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this ENGLISH ENGLISH ADDRESSING REMOTE INSERTERS INSERTERS ADDRESSING SELF LEARNING KEY INSERTERS d Automatic self learning and addressing of inserters For learning the system s inserters Hold key near to inserter that you wish to address with the address viewed display SELF LEARNED Inserters already self learned INSERTERS If the inserters are already self learned a confirmation text is displayed SYSTEM TEST Input test Fa INPUT TEST Testing for open inputs can be done on either the whole system or
19. sabotage alarm generic notification s Telephone notifications associated to both activation and restoration of the system s sabotage mode Use the H keys to set the phone numbers Activating and restoring sabotage alarm in control unit and peripherals Telephone notification associated to the activation and restoration of the control unit s and peripherals sabotage alarm tampering and module tampers no peripherals communication Use the H keys to set the phone numbers Activating and restoring sabotage alarm in single areas Telephone notifications associated to both activation and restoration of the single area s sabotage alarm the alarm is given by the inputs associated to the areas Use FH to select the areas Use the j Y keys to set the phone numbers Activating and restoring sabotage alarm for single inputs Telephone notifications associated to the activation and restoration of the single inputs sabotage alarm 24 hour tamper and inputs Use Hi to select the inputs Use the IY keys to set the phone numbers PHONE NOT MENU 02 Activating the system technical alarm generic notificatio
20. the exit time only if all of the inputs associated to it are closed Example used in a home environment to allow the user to close any open entrances An area with activated forced opening will start its exit time independently of whether there are any inputs associated to it After exit time has elapsed the area will revert to alarm if any entrances are still open Example used in office environments to avoid inattentive Users from leaving the system with areas not switched on because entrances are open In this case the triggering of the alarm will inevitably warn that the system has been left with open inputs Dependence area s dependence ties its switched on state to that of other areas AND function If you select the areas to depend from the area will result as being on only if all of the other selected areas are turned on In this case this area cannot be switched on or off manually by Users Switching on in chain fashion are not allowed area 1 depends on area 2 are 2 depends on area 3 switch on area 3 When switch on area 3 areas 2 and 1 switch on Example two separate offices and a garage are in common and the User wants to insert the area associated to the garage only if both areas of the two offices are switched on Area 1 OFFICE 1 depends on Area 2 OFFICE 2 depends on Area 3 GARAGE depends on Scenario 1 CLOSE OFFICE 1
21. to set the phone numbers Help JA Telephone notifications associated to the system s help for notifying the system is up and running Use the keys to set the phone numbers Page 22 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page 23 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this __2 11 Associating output Associating the same output to several events or several areas breakdowns alarms means the function of the output Example the output will activate when at least one area is in alarm mode if the generic alarm status is associated to the same stable type output OUTPUTS 15 ASSOCIATION AREA GEN ALR 01 NO IET Generic alarm area switched on Default No For selecting the output to associate to the single area s general alarm AREA SABOTAG 01 NO Me Area sabotage alarm output Default o S B For selecting the output to associate to the single area s sabotage alarm inputs tamper and 24h type in
22. 4 hours Technical Path Memory Switching on Burglary Tamper Page 13 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation BRAHMS s part to notify anyone of this ENGLISH ENGLISH ISTANTANEOUS 001 NEVER BALANCING 001 SINGLE BAL Instantaneous Default NEVER Parameter viewable only if the input is a delayed For managing the delayed input as instantaneous if partialised that is if associated to several areas and not all of them are switched on IF PARTIAL ON Standard setting the input is always delayed Example overhead garage door The input is delayed if all of the associated areas are switched on and is delayed if partialised at least one area switched off and one switched on Example this parameter is set when it is necessary for the door to be delayed type when the User is not at home and is instant when at home partialised system Area 1 Day time zone Area 2 Night time zone Area 3 perimetral Scenario 1 Going out Areas Scenario 2 Going to bed Areas 4 4 Front door entrance Instantaneous DELAYED 1 Type And or areas Areas 8 Balancing Default SINGLE NORM CLS NORM OPN SINGLE B
23. AL DOUBLE BAL Input normally closed Protection Input normally open S J Protection Single balanced input 1 H 9779 Alarm GED NO Protection 4 7 kohm Double balanced input Protection Tamper NC ices Be pa 99 _ 4 7 Page 14 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page 15 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation BRAHMS s part to notify anyone of this AND OR AREAS 001 INS IF AREAS OR AUTOEXCLUS 001 0 10 O NO 03 BUZZ OUPUT 001 NO ASSOC OUTPUT 001 NO Associated areas F 5 The inputs can be freely associated to more areas The behaviour of input which is associated to several areas depends on the value selected for the parameter AND OR AREAS And or areas Default If you associate several areas to an input the input s insertion status which is given by the switched on off status of the associated areas depends on this parameter Input inserted if at least one associated area is switched on Example
24. AREAS Scenario 2 OPEN HOME _SWITCH OFF SELECT AREAS Scenario 3 CLOSE SHOP SWITCH ON SELECT areas Key pad 1 Home location areas associated scenario scenario B EU scenario C Key pad 2 Store location areas associated scenario A Cod 1 Business Owner associated areas Cod 2 Employee associated areas Scenarios Default A sc 1 B sc 2 C sc 3 4 sc 4 Associates the scenarios to the keys on the keypad Use the arrow keys to select the keypad key C 4 5 With E keys modify the scenario associated to the keypad button Example a home with three area management day night perimetric through two activations total only perimetric Area 1 DAY TIME Area 2 NIGHT TIME Area 3 PERIMETER Scenario 1 GOING OUT oN orr Exacr zones Scenario 2 STAYING IN zones Key pad 1 areas associated scenario SCENARIO B Tamper Default sA Enables disables the key pad tamper and warning of failed communication with control unit from the keyboard 2 to 5 Input buzzer Default xes For activating deactivating the buzzer during the entrance time
25. CENARIO DESCRIPTION ASSOCIATED AREAS PROPERTIES TURN GOING TO BED TURN STAYING INDOORS KEYPADS ASSOCIATED SCENARIOS GOING OUT TURN INSERTERS ASSOCIATED SCENARIOS GOING OUT GOING TO BED B STAYING INDOORS INDEX OUTPUT DESCRIPTION TC output to disinhibit the detectors microwave when system is off associated to the NIGHT TIME area From a positive with NIGHT area switched off ALL KEYPADS ALL INSERTERS GOING TO BED STAYING INDOORS INDEX OUTPUT DESCRIPTION Fault yields a negative if faults are detected System status yields a negative if at least one area is switched on Technical Yields a negative when at least one technical alarm is active Relay 1 is activated during the alarm time CODE PROPERTIES TURNING ON TURNING OFF of all areas DESCRIPTION OF PROPERTIES TURNING ON TURNING OFF of all areas TEL NUMBER DESCRIPTION 5 mm Telephone 1 7 VOICE SABOTAGE TECHNICAL BURGLARY SWITCHING ON SWITCHING OFF OUT OF ORDER CODE ENTERING KEY ENTERING TEST RESIDUAL ALARM gt lt gt lt gt lt Technical SMS STANDARD MODE Same setting of the EASY mode plus e Customised scenarios e Customised keypads inserters codes keys e Customised telephone calls e Restore default parameters and codes separately ADVANCED MODE
26. NY SERVICE Network AppREssiNG IF PRovipED Is By Means Or Dua Frequency SIGNALLING Execrromaaneric CoMPariBiLITY Fabio Spectrum 5 Erm SHort Rance Devices Sro Be Usen THe 25 Muz 1 000 Maz Frequency Rance Wirt Power Levers Ranana Up To 500 Part 3 Harmonizeo Covere Essentia Requirements Unner AnricLE 3 2 Or THe R amp TTE DIRECTIVE ELEcrROMAGNETIC Fabio Spectrum Marrers Erm Eectromacneric Compamipitiry For Equipment SERVICES Part 3 Specific For SHort Rance Devices Sro Operatie On Frequencies Between 9 Kuz 40 Guz ALARM SYSTEMS Part 5 Test METHODS ALARMS SYSTEMS INTRUSION AND BURGLARY ALARM SYSTEMS GENERAL REQUIREMENTS ALARMS SYSTEMS INTRUSION AND BURGLARY ALARM SYSTEMS Part 6 POWER SUPPLIERS COMPLIES WITH THE PRODUCT STANDARD 79 2 Seconp LeveL Page 38 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this
27. PTIONS ACTION DESCRIPTION Impulsive switching on When input is unbalanced the associated areas switch on Impulsive switching off When input is unbalanced the associated areas switch off When input is unbalanced the associated areas exchange Impulsive switching on off status when off they switch on and when on they switch off When input is unbalanced the associated areas switch on and Stable switching on off when balanced they switch off Example if switching on and off must be managed via a mechanical key it is necessary to have a mechanical lock with C NC and NO contacts Input programmed to be type SWITCHING ON action STABLE SWITCH ON SWITCH OFF and associated areas the areas to switch on off Connect the input to the lock so that when the key is on system on the input is unbalanced i e open and when it is on system off the input is balanced i e closed This instantaneous input is active either when the control unit is on or off When unbalanced it does not triggers the keypad alarm LED lights to switch on and the alarm telephone call s to numbers associated to the BURGLARY ALARM Engaged Keypads status Telephone calls inserters Associated areas on Out of order Sabotage Technical Entrance 1 Entrance 2 gt lt Alarm relay Sabotage Technical gt lt Led alarm Instantaneous PRG Lock up Service Out of order Delayed 1 Delayed 2 2
28. al area switching offactions partial switching off The second descrip tion will show the switched on or of status of the remaining areas example SWITCHING OFF The switching off event takes place when the system is totally switched off 5 RES TAMPER xx CONT UNIT PWR DESCR Control unit or auxiliary power supply unit opening or ripping tampering detected Check tamper integrity ALA INP TAMP XXX RES INP TAMP INPUT DESCR Input xxx has been tampered with either cut or short circuited depending on its bal ancing check continuity along the input s electrical line If it has restored by itself anyhow check the input s electric line be cause there may some faulty connections RES AREA ALARM xx AREA DESCR When an input is in alarm state the associ ated areas will be too RESTORE INPUT xxx INPUT DESCR Input xxx is in alarm in unbalanced state BATTERY TX xxx ERR COM KEYPAD xx INPUT DESCR KEYPAD DESCR Radio input xxx battery is run down Re place asap The xx keypad is no longer communicat ing with the control unit read warning led on keypad is flashing Check activation of keypad bus cable and address ERR MOD IN xx IMODULE DESCR The inputs expansion module on bus xx no longer communicates with the control unit the red led communication light is not flashing Check activation of module bus cable and dip switch add
29. along with the buzzer output Always active independent from the statuses of the associated areas Example door open bell a typical use of this function is to make the key pad sound after a shop door is opened Area 1 indoors Area 2 perimetral Keypad 1 positioned loose to sound Associated areas ps Front door entrance Buzzer output ves Associated areas Keypad buzzer output H __ Perimetral area buzzer time 3 seconds Associating output No S A Assign the output to activate if the input is unbalanced If the commanded output is stable when the input unbalances the output activates if it balances the output deactivates If the output is impulsive it activates and starts the timer when the input unbalances Depending on the parameter managing the output may be linked to the input s inserted status ENGLISH ENGLISH CDM ON OUTP 001 ALWAYS ON OPERATON 001 PULSE ON OFF Output command Default ALWAYS According to this parameter managing the exit may be linked to the input s inserted status ALWAYS IF NOT INSERTED The output is always commanded by the input status More precisely the output is activated if the input is unbalanced and restored if the input is balanced If the input is active meaning one or more areas associated to it are ins
30. be set above 5 minutes Activate SEE SYSTEM STATUS setting at x than xx seconds Deactivate the function QUICK SWITCHING ON 5 Declaration Declares under its own responsibility that the following products for security alarm units comply with essential requisites and dispositions given by the following Directives and applicable Regulations listed below DIRECTIVES 2006 95 CE 2004 108 CE 1999 05 EC EN 50130 4 A2 EN 60950 1 EN 61000 6 3 ETSI ES 203 021 1 EN 300 220 3 EN 301 489 3 EN 50130 5 EN 50131 1 EN 50131 6 BPT S p a a Socio Unico Head and Registered Office Via Cornia 1 b 33079 Sesto al Reghena PN Italy http www bpt it mailto info bpt it PROXINET8 Low Votrace Directive ELECTROMAGNETIC COMPATIBILITY DIRECTIVE DIRECTIVE ON RADIO EQUIPMENT AND TELECOMMUNICATIONS TERMINAL EQUIPMENT AND MuTuAL ACKNOWLEDGEMENT OF THEIR COMPLIANCE TO STANDARDS ALARM SYSTEMS Part 4 ELECTROMAGNETIC COMPATIBILITY INFORMATION SECURITY TECHNOLOGY EQUIPMENT Part 1 GENERAL REQUIREMENTS ELECTROMAGNETIC COMPATIBILITY EMC Part 6 3 GENERAL STANDARDS EMISSION STANDARD FOR RESIDENTIAL COMMERCIAL AND LIGHT INDUSTRY ZONES EauiPMENT Requirements For Pan European Approval For Connection To THe Networks Psrus Or Supportine THE Voice TELEPHO
31. cific menu To set all the devices to the default parameters do as follow 1 To access the Technical Menu press the lt 5 key for 5 sec followed by the User code if under 6 digits confirm with P Press the lt ESC key for 5 sec and enter the Technical code With P select and press With confirm or to cancel VERSION PROXINET8 1 0 X Control unit version To know the model and version of the control unit in use Page 33 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this ENGLISH ENGLISH 3 Events messaging The events are composed by EVENT DESCRIPTION activation restoring EVENT INDEX EVENT DESCRIPTION part 2 ACTIVATION RESTORE DESCRIPTION 2 SWITCHING Areas switched on We have a switching on event when there are only switching on actions total or par tial If switching on all of the areas man aged by the control unit the second de scription will read TOTAL whereas partial switching on will indicated the switched on areas example Telephone notifications group Technical Burglary Out of order PARTIALIS Areas switched on The partialisation even takes place when we havenon tot
32. communications MR ROSSI S HOME Example the following message appears if an alarm is triggered and an sms sent MR ROSSI S HOME SYSTEM ALARM X When system is engaged activating delay type input will initiate input time max 45 sec as compliant to Standard 50131 If an alarm is activated during input time sirens will sound and telephone calls will be blocked and will be sent after 30 sec or when input time has expired Page 29 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this ENGLISH ENGLISH 2 16 Special functions SPECIAL 21 FUNCTIONS KEYPADS DISPLAY AREAS STATUS Display keypads Default AREAS STATUS F S Al The keypads are made up of two 16 character lines The date appears in the first and in the second you can choose to view among the following information BASED Hie Keypad name AREAS STATUS Switched on status of the single areas System switched on status OFF COMPLETELY ON PARTIALISED ENTER CODE ENTER CODE fixed message PRINTER OUTPUT ENABLE mE Printer output activated Default For activating the printer output for the continuous print outs of events on the RS 232 The serial setting is Bits p
33. control you can create a filter which checks any incoming telephone numbers with those in your contacts list Or you can activate access to all the telephones the password will in any case be required regardless of whether the secure GSM is cleared or not Telephones activated for secure GSM Default De By activating GSM and secure GSM telecontrol you can select the telephone numbers to which the combiner will respond Activate control of PSTN line Default vo NO If activated it checks control of the PSTN line if the line is down a breakdown notifications issued Activate control of GSM line Default 29 1 activated it checks control of the GSM telephone line field SIM registration and if incorrect a breakdown notification is issued Listen to telephone line Default LIS TO TELEPH LINE If activated before making a PSTN telephone call it waits for the free dial tone To be activated only when necessary Call delay Defauit 1002 When enabled allows the delay of any notification sending for the time period set expressed in seconds System description SYSTEM DESCR The system description is the text to send along with the SMS
34. d and allows the User to set the switch on status of the areas by selecting a scenario independent from the previous configuration LEAVING HOME day night perimetral areas are on GOING TO BED only day and perimetral are on and night is off STAYING INDOORS only perimetral is on Only the selected areas switch on nothing changes about the status of the non selected areas Example used when the user wishes to turn on some areas in a specific mode for example a scenario that enables only perimetral PERIMETER ON EH Only the selected areas switch off nothing changes about the status of the non selected areas Example used when the user wants to switch off some areas in a specific way for example a scenario that switches off only perimeter PERIMETER 2 The selected areas change status if on they switch off and if off they switch on Example used to group into a single scenario switch on and off actions of several areas For example a scenario that switches on off only the perimeter area SWITCH PERIMETER OUTPUT OPERAT 01 DISABLED ASSOC OUTPUT 01 NO Output action and output association Default s If activated it lets command an output from a scenario Select the output to command in the ouzeur Assoc DISABLED SWITCH The scenario does not command any output scenario disabled or scenario to manage areas only T
35. d input if a control unit DELAYED input triggers the entrance time And performs like an instantaneous input in all other situations Example input associated with an infrared detector placed in front of a delayed type input If users open the door this triggers the entrance time and the detector also performs in the same way whereas if an intruder break in through a window the sensor performs instantaneously Page 12 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Input active when control unit is If itis closed i e balanced once the entrance time elapses it performs like a normal instantaneous input Otherwise if once the exit time is elapsed it is still open i e unbalanced it will be ignored until it is closed i e balanced and from that moment it behaves like a normal instantaneous input Example the memory inputs are defined as the memory inputs that the User wishes to leave open dormer window windows even when the system is engaged This input is used to switch on off any areas associated to the input The input s performance is defined by the action parameter Total system switching off or partialisation via a SWITCHING ON input simulates the entering of a code which blocks the telephone calls if the parameter is programmed to STOP FROM CODE in the TELEPHONE O
36. dressing Enables disables auto addressing DHCP PXWEB KEYPAD EMULATOR 02 Keypad emulation PXWEB Associates the virtual keypad to a physical keypad address 192 168 001 100 IPADDR CHANGE IP address configuration Network board IP address configuration 2595025572557000 NETMASK CHANGE SUBNET MASK configuration Configures the SUBNET MASK 192 168 001 001 GATEWAY CHANGE GATEWAY Configuration Allows GATEWAY configuration ENGLISH ENGLISH SCENARIOS 03 MODIFY SCENAR 01 GOING OUT AREA OPERATION 01 EXACT ON OFF ASSOC AREAS 01 Actions on areas Default EXACT ON OFF Associated areas FS The parameter defines the action that the scenario is to carry out in the areas specified inl AREAS Assocc DISABLED EXACT ON OFF SEL AREAS ON SEL AREAS OFF SWITCH SEL AREAS The scenario does not alter the switched on status of the areas Example scenario that is disabled or managed only for the associated output defined in OUTPUT ASSOC The selected areas will switch on and those deselected will switch off in forced manner in the exact defined configuration Example it is the one most commonly use
37. er second 9600 Data bits 8 Parity N Bit stop 1 Example connecting the PC and control unit with a rs 232 cable male female Open a reception programme from serial Hyper Terminal for example and set COM and serial ports 0 ar 001 01 22 53 01 01 00 UTENTE 001 1 01 22 56 01 01 00 INSTALLATORE E 9 01 01 00 8 9 01 01 0 001 01 26 43 01 01 00 UTENTE 001 01 01 27 13 01 01 00 INSTALLATORE 01 27 29 01 01 00 001 01 27 40 01 01 00 UTENTE 001 001 91 27 45 01 01 00 UTENTE 001 Riley aut 19200001 POWER ON CTR U PREVIOUS STATUS Control unit switched on status after powering the system restarting it Default PREVIOUS ARMING All of the areas switch on All of the areas switch off The switching on status of the areas returns to that before the power off was given QUICK TURN ON DISABLE me Quick switch on Default If activated it lets you start scenarios from the keypads without having to enter a code Warning When activated prevents exclusion of open inputs during the start up phase SEE AREAS STATUS 0 30 SEC 000 Screening the status of the control unit from keypads and inserters Default If switching on off state of the areas is set to greater than 0 it is hidden after a preset amount of time Buzzer o
38. erted the output is commanded by the input s status More precisely the output is activated if the input is unbalanced and restored if the input is balanced If the input is deactivated meaning no area associated to it is inserted the output is commanded by the input s status More precisely the output is activated if the input is unbalanced and restored if the input is balanced Parameter viewable only if the input is of the switching on type Switch on Default PULSE ON OFF FS A For managing the type of action switching on off on control unit areas associated to the input PULSE SWITCH ON PULSE SWITCH OFF PULSE STABLE ON OFF The control unit switches on the areas when the input is unbalanced The control unit switches off the areas when the input is unbalanced When the input is unbalanced the control unit inverts the the switch on status of the areas associated to the input The switching on status of the areas associated to the input follows the input s balancing status If the input is unbalanced the areas are switched on if the input is balanced the areas are switched off Example see the example shown on the type of input defined SWITCHING ON Input description For editing the input description Page 16 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual
39. et the following Action 1 Address non influential Status 1 Extension YES Time 19 Minutes 30 A Exit time will be activated if a scheduler inserts into the system An alarm will be generated independent of the Force Area parameter if outputs are open at the end of the exit time Page 31 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this ENGLISH ENGLISH _ 248 Events _ Event menu For viewing events as in the user menu See user s manual for event viewing Event printout Press to start print out of events on control unit RS 232 TIME amp DATE 25 Date and time F s Press to modify the clock s date and time 14 34 05 07 10 Changing from daylight savings to solar time is done automatically according to the Italian A MODIFY NO national rule 03 46 01 01 10 _ ios 10 Set date 03 46 01 01 10 01 03 46 01701710 Press to end subsequently press to save or to cancel DAY 01 Use the arrow key to select the parameters to edit and with the keys edit the value
40. fications associated to both activation and restoration of system breakdowns Use the keys to set the phone numbers Activating and restoring battery breakdown Telephone notifications associated to both activation and restoration of battery breakdowns control unit Use the 7 E keys to set the phone numbers Activating and restoring 230 Vac power supply breakdown Telephone notifications associated to the absence and restoration of the 230 Vac power supply in the control unit Use the Y keys to set the phone numbers Activating and restoring power supply unit breakdown Telephone notifications associated to both activation and restoration of breakdowns the control unit power supply Use the keys to set the phone numbers Activating and restoring breakdown of fuses Telephone notifications associated to both activation and restoration of breakdowns fuses in the control unit and peripherals Use the 4 keys to set the phone numbers Activating and restoring PSTN and GSM breakdown Telephone notifications associated to the activation and restoration breakdowns of the PSTN and GSM lines
41. he scenario activates the selected output scenario that opens a lock controlled by a timed exit Or a scenario that switches on a light commanded by a stable type output The scenario deactivates the selected output scenario that allows to switch off a light controlled by a stable type output The scenario exchanges the status of the selected output if on it becomes off if off it becomes on scenario that groups on and off for a light controlled by a stable type output LABEL 01 GOING OUT Scenario description For editing the scenario description 8 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page 9 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone this 2 4 Areas MODIFY AREA AREA FORCED NO 01 01 Force area Default 5 Bj Forcing is the parameter which helps to define whether an area can be switched on even when any inputs are open in this case when the exit time is elapsed the area alarm will be triggered An area with deactivated forced opening will start
42. iated areas scenario 11 Inserter 2 Shop location associated areas scenario 11 Cod 1 Business Owner associated areas Cod 2 Employee associated areas 4 SCENARIO 1 L 01 GOING OUT SCENARIO 21 01 GOING TO BED SCENARIO 3 L 01 STAYING IN Scenarios Default Associate the scenarios to the three inserter LEDs Use keys H to edit the scenario associated to the inserter led Example a home with three area management day night perimetric through two activations total only perimetric Area 1 DAY TIME Area 2 NIGHT TIME Area 3 PERIMETER Scenario 1 GOING OUT TURN_ON OFF Exact areas Scenario 2 STAYING IN TURN ON OFF Exact areas Inserter 1 associated areas 11 corne our scenario 12 srazwc INDOORS scenario 13 SCENARIO TAMPER 01 NO mE Tamper Default Allows to enable disable failed inserter communication warning ENTRY BUZZER 01 YES Input buzzer Default YES For activating deactivating the buzzer during the entrance time EXIT BUZZER 01 YES Output buzzer Default zs For activating deactivating the buzzer during the exit time ALARM BUZZER 01 YES
43. ications Act syst sbtg A Common message Rossi Family 21 National Street Milan auto config on PC software Ele Centrale Impostazioni Aiuto rvvvvvvvvvvvyuy Tel Description For editing the telephone description ENGLISH ENGLISH 2 15 Telephone options TELEPHONE 20 OPTIONS CALL SEQUENCE CONTINUE 1 2 3 4 Call sequence Default 1 2 3 4 5 For choosing if in the selection sequence of programmed telephone numbers in case of communications that are NOT completed e g the called telephone number is busy another call should be immediately made to the same telephone number or if the communicator should continue selecting other numbers Call and move on to next number Call and try calling back for the number of times set up in the phone STOP FROM PHONE EVERYBODY 5 Stop telephone calls sequence Default s Al While listening to a voice call Users can press key 5 on their telephones to automatically interrupt ALL of the subsequent telephone communications SMSs voice calls CONTACT IDs While listening to a voice call Users can press key 5 on their phones to automatically interrupt ONLY the repetitive call backs to their own phone numbers ALL of the subsequent telephone communications are anyhow carried out
44. iggers the respective ENTRANCE TIME counter During the ENTRANCE TIME the control unit does not trigger the alarm if any PATH or DELAYED type inputs are unbalanced At the end of the ENTRANCE TIME if the system is not DISINSERTED a GENERAL ALARM is triggered A setting a time greater than 45 minutes voids the reference regulations ENGLISH ENGLISH 2 10 Telephone notifications TELEPHONE 14 NOTICATIONS 01 GENERAL ALARM SYS ALRM ACTV He HH HHH ACT INP SAB 001 Activating and restoring general system alarm generic warning Telephone notifications associated to both activation and restoration of the general alarm of the system Use the H keys to set the phone numbers Activating and restoring general alarm in single areas Telephone notifications associated to both activation and restoration of the single area s general alarm Use C select the areas Use the keys to set the phone numbers Activating the system sabotage alarm generic notification Restore system
45. ing mode Default _ only base parameters for simple systems are available 01 MODE 7 STANDARD simple strandard system parameters are available all configurable parameters are available PROGRAMM MODE EASY With the passage from ADVANCED to EASY the switch mode is proposed on the keypad SOME PARAMETERS e Press A to confirm the automatic re configuration of the parameters not WILL BE LOST managed at default value e Press to quit without editing the value so it simply disappears A YES ESC This manual shows all of the menu items as if it were in ADVANCED mode To understand which menu item mode is viewable and therefore editable just look at which letters appear in the top right hand corner of each item s description F S Al s found the three modes Item found in standard and advanced modes Item found only in advanced mode Following are the main differences among the three types ENGLISH ENGLISH EASY MODE The EASY programming mode lets you quickly and simply start up technicians The pre configured settings are the following INDEX AREA DESCRIPTION DAY AREA low complexity systems or is used by non highly skilled installing INDEX AREA DESCRIPTION 3 PERIMETER AREA NIGHT AREA GOING OUT S
46. isengaged It is not registered as an an alarm input but only to be monitored via key pad or to activate outputs of calls regardless of control unit status It is recorded in the event log If closed it enables the time schedule function excluding it if open It remains enabled with control unit engaged and disengaged The Fault Led light up for any malfunctions and breakdown output is enabled The system displays the ANOMALY message followed by the input description It is active only when the control unit is on If unbalanced it triggers entrance time 1 during which a valid code must be entered to disengage the control unit During this time the buzzer will sound continuously If the control unit is not disengaged the general alarm will be triggered Example input associated with an input port As DELAYED 1 but with entrance time 2 This instantaneous input is active either when the control unit is on or off Unbalancing a 24 hour input triggers a general alarm Example input associated with external siren tamper This instantaneous input is active either when the control unit is on or off Unbalancing a technical input activates the TECHNICAL ALARM defined output sounding a continuous buzz for the duration of the technical alarm and the switching on of the alarm LED light on the keypads Example an input associated with a fire or gas detection sensor Instantaneous input with control unit on It performs like a delaye
47. mper of the exits expansion module on the bus xx has been tampered with Check module tamper The tamper of the radio receiver of bus xx has been tampered with Check module tamper Telephone notifications group Sabotage Technical Burglary Switching on Out of order xx KEYPAD DESCR The xx keypad s opening tamper has been tampered with Check keypad tamper Exiting the technical menu is logged in the events log RES BATTERY xx Main battery breakdown The communication between control unit and PC uploading downloading program ming and events is logged in the events log CONNECT d z 2 Remote communication between the con trol unit and the PC programming loading unloading and events is recorded in the events memory xx NETWORK BREAK NETWORK BACK xx No 230 Vac power supply breakdown The autotest is normally used to check whether the control unit is up and running via a telephone notification CODE DESCR Entering a code user or technician s is logged in the events log KEY DESCR The action of approaching keys to insert ers is logged in the events log Generic system breakdown notification The breakdown can be caused by the batteries the 230 network the power supply unit or fuses SYS TEC ALA Generic technical alarm event It is gener ated with an area technical alarm if
48. n 5 Al Restore system technical alarm generic notification 5 Al Telephone notification associated to the activation and restoration of the system s technical alarm the alarm is given by the technical inputs Use the H EI keys to set the phone numbers Activating and restoring technical alarm in single areas Telephone notifications associated to the activation and restoration of the single areas technical alarm the alarm is given by the technical inputs associated to the areas Use C to select the areas Use the keys to set the phone numbers Page 20 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page 21 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation BRAHMS s part to notify anyone of this PHONE NOT MENU 04 BURGLARY ALARM SYS BUR ALRM ACT HHEH PHONE NOT MENU 06 FAILURES SYS FAILURE ACTVS Activating the system burglary alarm generic notification 5 Reset burglary alarm system general warning S Al Telephone notification
49. n keypad output Default 77m If you activate the inputs to have buzzer properties you can select the keypads that have to sound during the buzzer time Example shop entrance doorbell PRE ENTER TEST DISABLE Pre insertion Test Default ___DrsaBie PRE INSERTION TEST ACTIVATED the system can be forced activated when the system is activated and one of the following anomalies is present The breakdown led blinks and the anomaly is stored in the event log If this operation is performed by inserter the same shall emit a beep and cancel the insertion Breakdown messages BUS TAMPER if one of the elements connected to the bus 5485 fails to communicate BOX TAMPER if a control unit or inserter tamper is in alarm mode ANOMALY BREAKDOWN if one of the inputs defined as BREAKDOWN is open INPUT TAMPER if an input is in tamper mode NO PSTN LINE if line was activated but missing NO GSM LINE if line was activated but not registered NO NETWORK no network power available BATTERY BREAKDOWN if the control unit battery is down FUSE BREAKDOWN if fuses are out of order Page 30 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this RETRY SUSE assistance description Default
50. ne Options menu and is in breakdown status When an incorrect password has been in serted 5 times When an incorrect key has been attempted 5 times HSITINA SIy Jo euofue o Lied S SWHYYg ou eu je aq feu SIY ur pue 18A 226461 EL0Z L1 6Z 08PS08HZ g ENGLISH 4 Reference laws Below are the standards to bring the system up to code with standard EN 50131 The inserter buzzer notifications cannot be deactivated EN50131 1 8 3 8 2 The 24H and Technological inputs must not be used The inputs configured as Switch on are compliant only if controlled from devices whose number of combinations exceeds 10000 If the system incorporates devices that report breakdowns these must be connected to the breakdown input The telephone combiner must be active The system must contain an self powered external siren to signal any intrusion alarms The number of alarms for input auto exclude must be set between 3 and 10 Power supply failure notification time must be set at one minute 1 min Do not activate quick switching on The Stop Communication option must not be activated when control unit is switched off Input time 1 and 2 must be set to a maximum of 45 sec EN50131 1 8 3 8 2 The battery test time must
51. ne connected a control unit with GSM calling function Esempio linea PSTN collegata ad un centralino con possibilita di chiamata GSM 0 C 04567890 1 2 Telephone number Means the pbx is on line Number to request the line from the pbx Telephone communication format Default see table at start The telephone communications will be of the voice type The telephone communications will be of the SMS type Telephone communications will be of digital CONTACT ID type only with PSTN line Example notification to security firms 5 Al Call attempts Defauit 2021 F S Used in VOCAL and CONTACT ID communication formats It defines the number of telephone call attempts to the number To interrupt press either 0 or 5 on the telephones keypad Common message Default 01 5 Al A voice message can be associated to each telephone number which is then sent with each voice call Example we have 2 phone numbers where to send system status For both the home street number must be quickly given Telephone 1 standard Msg messacz 01 Telephone 2 standard Msg messace__01 Telephone notif
52. ng crew Activate for remote telecontrol Default 5 Makes it possible for Users to remotely access the system to tele manage it SMSs or voice guide User code visibility Default Al Setting a User code to public mode allows other codes that are activated to access the manage other codes in user menu to edit activate said code Example for systems in a small company the owner s code is normally set to private so that it remains hidden from employee codes Page 24 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Associating output Defauit 29 S Al For associating an impulse type output when entering a User code on the keypad Example used to act on a lock through code input Code group Default oo S Al For associating the codes to a group so they can be managed simultaneously Such group s operations may be activated deactivated by the timer USER MENU 001 Activate User Menu Default ENABLED Activates to access user menu code Activate Events item on user menu Default ENABLED Activates code to access to the Switching On item on the user menu
53. ny time with no obligation on BRAHMS s part to notify anyone of this ENGLISH ENGLISH 2 13 Keys Check key ES viewable 4 For checking whether a key is inserted in the database and if the index and description are SELECT KEY KEY 001 KEY 001 Clear code Default ENABLED ENABLED If you want to use a key it must be activated Areas associated to the keys Default BW f ASSOC AREAS 001 For assigning the key s areas of competence Use the IY H keys to set the areas to associate E KEY 001 Key learning Dh eui For key learning and associating Authorise key Default ARMING DISARMING associated to it AUTHORIZAT 001 ARMINCHDTSARMING The key is authorised only to switch on the associated to it The key is activated to switch and off the areas areas Example for assigning a switch on key to the cleaning crew Associating output Default For associating impulsive type output when key is inserted into inserter Example for opening a lock with key NO 9o
54. off no area switched on Access to the technical menu is allowed only when the control unit is completely switched off no area switched on and the after entering the User code WITH CTL U OFF USER CODES Enabling control unit programming from PC Default FROM CONTROL unit OFF Programming the control unit from PC is only allowed when the control unit is completely switched off i e no areas are switched on Programming the control unit from a PC is only allowed when the control unit is completely switched off i e no areas are switched on and the User code has been entered STATUS 001 ENABLED ASSOC AREAS 001 AUTHORIZAT 001 ARMING DISARMING REMOTE CTRL 001 ENABLED VISIBILITY PUBLIC Clear code Default If you want to use a code it must be activated Areas associated to the code Default s e For assigning areas of competence to the User code Use the keys to set the areas to associate User code authorisation Default ARMING DISARMING s The code is activated to switch on and off the areas assigned to it The code is only authorised to switch on the areas assigned to it Example for assigning a switch on code to cleani
55. omaly The NETWORK MISSING event is inserted in the events log In case of power outages the breakdown LED indicator light will stay permanently on A setting a time greater than 60 minutes voids the reference regulations General alarm time Default 020 During the GENERAL ALARM TIME the GENERAL ALARM RELAY is active The general alarm condition is determined by the inputs activations Sabotage time Default 090 Alarm time associated to inputs for 24 hours or to tamper tampering Technical alarm time Default 090 Alarm time associated to technical type inputs Burglary alarm time Default Alarm time associated to burglary type inputs Exit time buzzer Default 1009 5 The BUZZER ALARM condition is determined by activations of inputs which have their Buzzer Output properties set to ON Exit time Default 1 050 F 5 During the EXIT TIME the control unit checks the state of the inputs and warns about any open ones This notification takes place visibly on keypads and inserter LEDs and acoustically on the keypad buzzers Entrance times 1 and 2 Default 1 020 Default 2 1 040 When the system is inserted an unbalanced input of the DELAYED 1 or 2 type tr
56. puts AREA TECH ALR 01 OUTPUT 004 Area technical alarm output Default ourPuT 004 S For selecting the output to associate to the single area s technical alarm technical type inputs AREA BURG ALR 01 NO m Area burglar alarm output Default 20 For selecting the output to associate to the single area s burglary alarm AREA READY 01 NO pE Area output ready Default No S Al For selecting the output to associate to the single area s ready status an area is deemed ready when none of its associated inputs is open AREA ON OUTPUT Generic alarm area switched Defauit ourpuT_002 S For selecting the output to associate to the single area s switched on or off status Area output off Default 5 Allows the selection of the output be associated with the disabled area status for individual areas Area buzzer output Default No sA For selecting the output to associate to the single area s input buzzer an input can be associated to a buzzer function AREA BUZ OUTP 01 NO Area TC output Default Al For selecting the output to associate to the single area s TC
57. r 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this 2 Technical Menu ACCESSING THE TECHNICAL MENU Depending on the coss INSTALLER 5 TECHNICAL parameters access to the technical menu may be either preceded or not by the User code gt Simultaneous access to the technical menu or user menu from multiple keypads is not allowed INDIRECT ACCESS Press and hold the 7 5 key to access the Technical Menu enter the user code press the O ESC key again for 5 seconds and enter the technical code Use the keys to scroll down one character at a time and the to modify the text DIRECT ACCESS When the system is fully disengaged press the 7 ESC key for 5 sec and enter the technical code 222222 to access the Technical Menu Use the keys to scroll down one character at a time and the keys to modify the text 7 AE 97 2 1 Programming mode For the burglar proof alarm control unit to be as user friendly as possible from inexperienced installers to the most demanding professionals the system features the programming mode concept This can give either few or many parameters depending on the individual installer s skill or needs 08 23 16 05 10 123456 ENTER CODE ATTESA COMANDO USER MENU Programm
58. ress ERR MOD OUT xx IMODULE DESCR The outputs expansion module on bus xx no longer communicates with the control unit the red led communication light is not flashing Check activation of module bus cable and dip switch address ERR MOD RX xx JAM MOD RX IMODULE DESCR IMODULE DESCR The radio receiver module on bus xx no longer communicates with the control unit the red led communication light is not flashing Check activation of module bus cable and dip switch address The radio receiver module on bus xx has detected a radio transmission that could shut out any radio transmitters JAMMING function activated in control unit SUPERVIS TX xxx INPUT DESCR Radio input xxx has transmitted son detected communication ITAMP MOD IN xx MODULE DESCR The tamper of the inputs expansion mod ule on the bus xx has been tampered with Check module tamper Page 34 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this Page 35 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this ACTIVATION TAMP MOD OUT xx ITAMP MOD RX RESTORE DESCRIPTION 2 IMODULE DESCR The ta
59. s associated to the activation and restoration of the system s burglary alarm the alarm is given by the burglar proof alarm inputs Use the keys to set the phone numbers Activating and restoring single area burglary alarms Telephone notifications associated to the activation and restoration of the single areas burglary alarm the alarm is given by the burglar proof alarm inputs associated to the areas Use FH to select the areas Use the Y keys to set the phone numbers Total switching on switching off and partialisation of the system Telephone notifications associated to complete switching complete switching off and partialisation of the system total power on means total switching on of the managed areas Use the keys to set the phone numbers Switching on and off single areas Telephone notifications associated to the switching and off of the single areas Use select the areas Use the keys to set the phone numbers Activating system breakdown generic notification 5 Al Restore system breakdown generic notification S Telephone noti
60. status The TC output is for blocking the sensors when the system is disinserted It works as follows example for control unit exit 1 which when ON yields 13 8Vdc e itruns at 13 8V when the area is switched off e with area switched on and the input is open during the exit time System breakdown output generic breakdown warning Default OUTPUT 003 OUTPUT 003 For selecting the output to associate to the system s breakdown status Battery breakdown output Default ouzeur 003 S Al OUTPUT 003 rm For selecting the output to associate to the batteries breakdown status control unit auxiliary power supply units POWER FAILURE Missing 230 Vac line output Default ourpur_003 5 OUTPUT 003 For selecting the output to associate to the cut off 230 Vac power supply control unit ENGLISH ENGLISH 2 12 Codes INSTALLER TECHNICAL CODE CHANGE TECHNICAL CODE Edit technical code For editing the technical code default 222222 TECH MENU ACCESS WITH CTL U OFF ra PROGRAM FROM PC Accessing the technical menu Default WITH CTRL U OFF Access to the technical menu is allowed only when the control unit is completely switched
61. the meaning of the values see the table below Example if programme step activates output 3 at 08 30 the following is displayed Hour 08 Minutes 30 Action 2 Address 3 Status ON Extension NO PROG A STEP 01 HRS 00 Hour and minutes Default 29 00 PROG A PASS 01 For setting the hour and minute of the programme step action MINUTES 00 Action address and status Default PROG A STEP 01 Depending on how the action is set the address and status change meaning OPERAT NONE ACTION ADDRESS STATUS 0 1 0 Turning off the system 5 1 ON full switch on Output index 2 OUTPUT output off output on PROG A STEP 01 ADDRESS PROG A STEP 01 STATUS OFF E Area index 0 Switching off 1 First start up 4 B copEs 0 unlock codes d 1 on _ lock codes Example set the following to activate output 3 at 08 30 Action 2 Address 3 Status ON Extension NO Time 08 Minutes 30 Extension Default By activating the extension of a programme step you can postpone the action from PROG A STEP 01 the user menu POSTPON NO Example if you wish to delay system switch on until 19 30h s
62. tivate an impulsive type output via SMS to send a start command to heating Code 1 password 123456 telecontrol ves Output 2 type 5 activating from remote ves Telephone options telecontrol from SMS ves SMS to send activate heating CRSMS 123456 6002 Output follows Defaut 20 1 For binding the activation status of output as function of another output Example we want two outputs on the general alarm bus Output 10 type Output 21 type follows output OUTPUT 10 In the outputs Association menu assign general alarm status of the areas Lourpur 10 Output description For editing the output description Autotest intervals Defauit _2221 S Al It determines every how many hours the control unit should automatically perform a functional test The first auto test after switching on the control unit is done after the time defined by AUTOTEST INTERVAL If the value is set to 000 the autotest is not performed Example this function is generally employed by surveillance as system survival Telephone 15 security firm number format system code xxxx Autotest interval hours In telephone notifications telephones for autotest notifications mx Battery test interval Default 25 5
63. used when you wish to manage partialisations along with the areas that share several inputs Input inserted if all of the associated areas are switched on Example if there are two apartments that both share the same garage usually two areas are associated to the garage one for each apartment and the AND function is enabled And input Default No An input which is programmed AND with another input will alarm trigger only if the second one is in alarm state This parameter is normally used to have a double consensus function to generate the alarm via the x Instantaneous you can set this input Example two sensors point to the same room and the user wants an alarm to be issued when both sensors go into alarm mode INPUT 1 Type And inputL_input 2 INPUT 2 Type Andinput zwPoT i Auto exclude input Default It defines the number of times that the input can switch to alarm beyond which said input is automatically excluded The alarm counter resets and the input re includes itself if at least one of the associated areas switches off Example A traditional example are outside detectors Buzzer output Default vo S Al For choosing whether the input will activate the buzzer output or not or the keypads activated to sound
64. x the associated areas go into burglary alarm mode Code xxx has been activated from the user menu The chronologically previous event shows who has edited it ACTIV CODE xxx CODE DESCR Code xxx has been activated from the user menu The chronologically previous event shows who has edited it 21 wrong codes have been inserted from WRONG CODE KEYPAD DESCR keypads The description is the one of the last keypad to have an insertion attempt 21 invalid keys have approached insert INCORRECT KEY INSERT DESC ers The description is the one of the last inserter to have an insertion attempt When an inserter fails to communicate with the control unit When the user forces switch on of the control unit during a system breakdown or anomaly EXCL INP TIME When an input xxx is momentarily excluded i the clock is initialised from key pad When the User received a call from the control unit press key 5 on the phone to receive notification of the message or KISS OFF package received Output activation OUTPUT OFF xxx Output activation When the line has been activated from the Telephone Options menu and is in breakdown status Page 36 Programming Manual 24805480 29 11 2013 319F92C ver 1 3 The data and information in this manual may be changed at any time with no obligation on BRAHMS s part to notify anyone of this When the GSM function has been activated from the Telepho
Download Pdf Manuals
Related Search