WILDZAP STROBE USER MANUAL
Contents
1. equipment is operated in any other way than those described in this manual the product may suffer damage and the warranty becomes void Incorrect operation may lead to danger e g short circuit burns electric shocks lamp failure etc Do not endanger your own safety and the safety of others Incorrect installation or use can cause serious damage to people and property WILDZAP STROBE DESCRIPTION Description of the eguipment Features e Powerful 1500w output Speed control Dimmer e Link facility TOP VIEW 1 Link cable output 2 Controller link cable input 3 Dimmer 4 Speed 5 Power input 6 Fuse F10A WILDZAP STROBE FUCTIONS Functions 1 Turn the speed control to vary the flash rate between 1 12 flashes per second wy Turn the dimmer control to vary the brightness between 0 100 ow x Stereo jack input for connection of analogue 10v strobe controller or link input from another Wildzap Strobe Link output to another Wildzap Strobe Link Cable Connections Tip 10v Ring No connection Sleeve Negative Maintenance Always disconnect the electric mains power supply before cleaning or servicing Damages caused by non observance are not subject to warranty The Wildzap Strobe reguires almost no maintenance However you should keep the unit clean Wipe the cover with a damp cloth Do not immerse in liquid Do not use alcohol or solvents Make sure the equip2. EOIN AX WWW PROLIGHT GO UK WILDZAP STROBE order code STRO10 USER MANUAL WARNING FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP CAUTION Keep this eguipment away from rain moisture and liguids SAFETY INSTRUCTIONS Every person involved with the installation operation amp maintenance of this eguipment should Be competent Follow the instructions of this manual CAUTION TAKE CARE USING THIS EQUIPMENT HIGH VOLTAGE RISK OF ELECTRIC SHOCK Before your initial start up please make sure that there is no damage caused during transportation Should there be any consult your dealer and do not use the equipment To maintain the equipment in good working condition and to ensure safe operation it is necessary for the user to follow the safety instructions and warning notes written in this manual Please note that damages caused by user modifications to this equipment are not subject to warranty IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorised modification to the eguipment Never let the power cable come into contact with other cables Handle the power cable and all mains voltage connections with particular caution Never remove warning or informative labels from the eguipment Do not open the eguipment and do not modify the eguipmen
3. ment is fully dry before re connecting to the mains Product Specification Model Equinox Wildzap Strobe e Voltage AC 240V 50Hz CE e Max Total Load 1500W e Input Fuse F10A 250V Dimensions 520 x 190 x 240mm L x W x H e Weight 2 9kg
4. t Do not connect this eguipment to a dimmer pack Do not switch the eguipment on and off in short intervals as this will reduce the system s life Only use the eguipment indoors Do not expose to flammable sources liguids or gases Always disconnect the power from the mains when eguipment is not in use or before cleaning Only handle the power cable by the plug Never pull out the plug by pulling the power cable Make sure that the available voltage is between 220v 240v Make sure that the power cable is never crimped or damaged Check the eguipment and the power cable periodically If the eguipment is dropped or damaged disconnect the mains power supply immediately Have a qualified engineer inspect the equipment before operating again If the equipment has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation might damage the equipment Leave the equipment switched off until it has reached room temperature If your product fails to function correctly discontinue use immediately Pack the unit securely preferably in the original packing material and return it to your Prolight dealer for service Only use fuses of same type and rating Repairs servicing and power connection must only be carried out by a qualified technician THIS UNIT CONTAINS NO USER SERVICEABLE PARTS WARRANTY One year from date of purchase OPERATING DETERMINATIONS If this
Download Pdf Manuals
Related Search