BS-1000 Wireless Communication Station User`s Manual
Contents
1. BS 1000 Wireless Communication Station User s Manual The BS 1000 Communication Station Comm Station serves as a direct connection between the PC and the guard tour reader to allow for immediate uploading of reader data as well as initialization of the readers Description of the BS 1000 hardware gt Power Source E USB Connection 5v gt Data transfer speed E Approximately 30 records per second gt Compatible Guard Tour Reader and Signal Card Format E EMID 125Khz gt Status LED Lights in the descriptions below up indicates the direction on the BS 1000 where the status LED lights are located E Red LED Upper Left Flashing connected to a guard tour reader E Green LED Lower Left Flashing the BS 1000 is operating normally E Red LED Upper Right The BS 1000 is turned on E Green LED Lower Right Flashing the BS 1000 is operating normally gt Audio Signals E Long Beep once The BS 1000 has been turned on and is operating normally Operating Instructions 1 Uploading guard tour data from the guard tour reader to the PC BS 1000 is able to upload data from guard tour readers wirelessly Compatible readers include models BP 2002S BP 2002 W and BP 2002B W Attach the BS 1000 to the PC using the provided USB cable Start the patrol management software and go into the Connect screen PAaPatrol Setup Data Reprocess Export and Import Window Help B Connec2. sh against the inside edge of the unit E The patrol management software is not able to find the BS 1000 unit Please check the condition of the hardware installation by going into the Windows Device Manager
3. t Vi BasicReport 3 ShifiReport 18 RouteReport Operator User Password Change Password After Logon 7 45 0 Setup Data Reprocess Export and Import Window Help Connect i BasicReport HI ShifiReport A RouteReport B Exit Reader Searching for available communication port Please connect the Comm Station to the USB port If alreadv connected please remov ps guard tour reader Reader Records Records U pl dad Data Re Upload Data Process Data Set the reader into the indentation on the BS 1000 For reader model BP 2002S please place its reading head between the status lights and set its top flush against the inside edge of the BS 1000 The software will automatically complete the upload and time clock calibration tasks 2 Reading Signal Cards Using the BS 1000 E The BS 1000 can be used as a signal card reader by the patrol management software which is convenient when adding signal cards to the system Attach the BS 1000 to the PC using the provided USB cable Place the signal card in the region between its LED status lights The card number will be displayed on screen and be recorded by the software Troubleshooting E Not able to upload data from the guard tour readers Check to see if the reader is placed properly on the unit The reading head of the reader should be between the status lights of the unit and its top should be flu
Download Pdf Manuals
Related Search