SCOTTY Teleport
Contents
1. SCOTTY Tele Transport Corporation Version U2 1 xx system Recover for 519999999 Please choose Recover system and data partition with Factory Images Recover system partition with Factory Image Copy image from system recover CDs Create new Admin Image License necessary Info Exit Reboot By selecting the menu entry Info 7 information about the hardware and software configuration is displayed Recovering the Delivery State of the System Partition e Select the menu entry Recover system partition with Factory Image by pressing the key 2 e Confirm the security inquiry with Yes by pressing the key 8 Warning f the system partition is restored to delivery state all data which has been stored on drive C after delivery is permanently lost The data partition D is not affected by this e g the phone book will be conserved Recovering the Delivery State of the Whole System e Select the menu entry Recover system and data partition with Factory Images by pressing the key 1 e Confirm the security inquiry with Yes by pressing the key 8 Warning f the system is restored to delivery state all data which has been stored on drives C or D after delivery is lost Operator Manual SCOTTY DA 42 MPP Rack 5 1 2 Recovering the Delivery State from CD Operator Manual Recovering the system using the recover CD is usually only necessary if a new empty hard disk is inserted or if the recover partition has2. Try lower calling rates Low Cost calls No Video Check Camera Power Bus 3 Check Camera ON OF hand controller Operator Manual 17 SCOTTY DA 42 MPP Rack Check Teleporter Settings A B C Check video splitter No Audio Check Teleporter Settings Check IC Check IC Settings Check Headset HSD Fault Red LED Check transceiver with EMSHSD Software Open Terminal No Windows or Teleport Start up Recover the PC system see chapter Recover 18 Operator Manual SCOTTY DA 42 MPP Rack 5 Recover 5 1 SCOTTY System Recover Operator Manual SCOTTY systems feature a unique integrated system recovery which makes it possible to bring the system back to its delivery state If for example system files have been damaged or destroyed by accident the operating system or applications may not work correctly anymore By restoring the delivery state the system will be fully operational again SCOTTY systems use three partitions on the hard disk System partition c contains the operating system and the installed application the data partition D is used for storing data the phone book etc An additional hidden partition 1s used for the SCOTTY System Recover Restoring the delivery state is possible directly on the system without any additional components By using an additional partition this is even possible if the system is severely damaged and Windows can not even start In case that system recover is not available any more d
3. Congratulations You have now mastered the main functions of the SCOTTY SATCOM System successfully For more information please refer to the SCOTTY ProMax User s Manual part number SD2045004A Operator Manual SCOTTY DA 42 MPP Rack 4 Diagnostics 4 1 HSD Status Panel The HSD Status Panel is located on the front side of the SATCOM Rack It shows the current status of the INMARSAT transceiver one of the major parts of the SATCOM Rack using 16 LED s REGION EN a S E X x 9 Q y lt OL O O O O OQ lo ojl o O O O OO O nez C T us CN e d 2 2 2 olo Oo oO 0 E STATUS dii READY 4 The SCOTTY HSD Status Panel The STATUS LED s display the general status PWR displays that the HSD Status Panel 1s powered HSD shows that the INMARSAT transceiver is running A amp H is on when attitude and heading are available from the IRS system It is blinking when only attitude is available and heading is missing GPS shows that position data are received from the IRS system The field REGION displays which satellite is selected at the moment The four LED s in READY show when the four channels of the transceiver are ready for a call They are blinking when the signal level is low or when the INMARSAT registration has failed calls might still be successful in this state The CON LED s display when a channel is busy with a call They are blinking during registration Operator
4. Disk from Recovery CDs In case the recovery partition is destroyed or not present after changing the hard disk the hard disk can be recovered by using the recovery CD for an Admin Image refer to chapter Recovering the Delivery State from CD With this the system partition will be recovered using the Admin Image und the data partition will be brought back to delivery state Warning After this step only the Admin Image will be present on the recovery partition The factory image should be copied from recover CD onto the system using the menu entry Copy image from system recover CDs Operator Manual
5. at the bottom of the Main Window Video communication 1s ready to begin once this process is complete Ma Teleporter Options Help File Views PS Ready Configuration Default The Scotty Teleporter Main Window SCOTTY video communication is as easy as placing a telephone call The most often used functions are accessible by tool buttons These and all other functions are also available using the menu bar SCOTTY DA 42 MPP Rack 3 4 Making a Video Call Step 1 From the standard toolbar of the SCOTTY main window F select the Dial button emm Step 2 Select the entry of the desired party Alternatively you can directly enter the phone number into the Number edit field If you do not want to use the keyboard clicking at the button Pad opens a dial pad which can be used to enter the number with the input device Step 3 Select Dial A Deteiimetee 2 OF KIS cal To male ibi call select Low Cost end 3 5 Checking or Editing a Phone Book Entry Step 1 From the standard toolbar of the SCOTTY main window F select the Dial button PES Step 2 Click the Edit Entry button to display information about this specific phone book entry In order that the ISDN telephone number is valid regardless of the systems present location and the available network type the telephone numbers should have the following format 1 lt country code area code number e g 43 316 407849 3 6 Creating a New Phone Book Ent
6. eiu eae eu eue run 7 2l Ihe SCOTTY DAA2 MPP Syste 3 e dd 7 o OM pe Q 9 ETSE SES cun LU Mu C C c IE 9 J2 SANAE EPIS Sye Mines co 029 402 ces tease dsc e e a lo 9 So The Teleporc Min Widow usse dare Anon id ces 9 zA Makosa Videoe all EURO TFT PETRO NE 10 3 5 Checking or Editing a Phone Book Entry oooooonnnnnonononononnnnnnnnnnnnnnnnnnnnnnnnnnos 10 3 6 Creating a New Phone Book Entry ooooooccccnnncncnnnnnnnnnnnnnnononononnnnnononnnnnnnnnnnnnnos 10 2 RCCOIVIBD QC all ssec ios c otto A LE 11 So Tenia tna Calla ii 11 3 9 Making a 250 kbits Video C allia cuo t pre OR S 11 A DS A LED A 12 SIP layin aC kde VIde0s c deh penton sortie Sesion A datae qu d 12 3 12 Transfer of Files with Automatic Hang U oooooonnnnnnoonoooooonnnnonononnnnnnnnnnnnnnos 13 3 13 Transfer of Files during Video Callao best s 13 Sua sS wile lin OC AiG heal uses toi bate ne asad eed E nasa M Es oes 14 315 Making a Sto tie VideO so ep Uu ine I d M 14 SO Turin OI TIO Sy RA 14 A DIAONOS CS ete ee LC C UE 15 dal ES D Status Pano utiles lib 15 Z2 A S DGS WY A O A eta 16 A NN A PE ane Od er PNET 17 S ls ge 19 SE SCOTTY System RECOVER A V pui eEdG 19 S I Recoverime the Delivery Sale iere iet eta aaa t d 20 5 1 2 Recovering the Delivery State from CD ooooonnnnnnnnnnnnnnnccnonoconeninininnnnnininnnnos 21 Operator Manual 3 SCOTTY DA 42 MPP Rack 5 1 3 Creating Recover CDs 5 1 4 Creating Your Ow
7. long range capabilities ideally suited as an airborne platform for surveillance operations SCOTTY SATCOM Rack DA 42 MPP The video processing and communication unit integrating these functions e INMARSAT satellite modem e Windows compatible computer e Live video processing hardware e High quality video recorder e System control and maintenance software Antenna subsystem for communication with the INMARSAT satellite network Controllable camera with optical and FLIR capabilities Operator console including video monitors camera control panel keyboard and mouse Inertial Reference System as reference for the antenna positioning SCOTTY DA 42 MPP Rack 3 Operation 3 1 First Steps In the following section we want to make the user familiar with the basic functions of the system Making a video call using the quick file transfer feature recording and playing back videos and additional features of the system are described step by step to be carried out very easily 3 2 Starting the System Step 1 Start the engines or apply ground power Step 2 Switch on Mission Master and Bus 1 to 6 Step 3 Make sure that the main switch and all fuses of the SCOTTY SATCOM Rack are on Step 4 Windows and Teleporter load itself automatically 3 3 The Teleport Main Window Operator Manual When SCOTTY Teleporter is started it takes a few moments for the system to initialize The running initialization steps are displayed in the status bar
8. need urgent help for your SCOTTY solution call the appropriate customer support number for your part of the world Europe Middle East Africa Austria GMT 1 43 664 454 2827 The Americas Atlanta USA GMT 6 1 770 380 7186 Asia Pacific Philippines GMT 8 63 917 537 0624 Please always include the serial number of your SCOTTY unit or license Videoconference test numbers H 320 ISDN numbers 64 kbit s and 2x64 kbit s e Austria 43 316 407849 e USA 1 770 246 9082 e Asia 63 2581 1093 H 323 IP number up to 512 kbit s e Austria 193 154 221 198 or demograz scottygroup com e USA 209 155 96 99 or demoatlanta scottygroup com 6 Operator Manual SCOTTY DA 42 MPP Rack 2 System Description 2 1 The SCOTTY DA 42 MPP System Operator Manual The SCOTTY Group and Diamond Airborne Sensing present a versatile and efficient surveillance solution the SCOTTY Diamond DA42 Multi Purpose Platform MPP This twin turboprop has been outfitted with an observation camera and a beyond line of sight satcom link The video of the observation camera can be recorded locally in full TV quality and or sent to a control station in real time over the satellite link By combining up to four INMARSAT Swift64 satellite channels video rates up to 256 kbit s are possible using the latest video protocol H 264 to achieve the maximum video quality The full setup consist of following components Diamond DA 42 MPP airplane With its
9. Manual 15 SCOTTY DA 42 MPP Rack 4 2 EMSHSD SW The EMSHSD software provides easy access to the INMARSAT transceiver and diagnostics of the overall system The software can be started directly from the Windows Desktop by double clicking the EMSHSD01 icon EMS HSD Control system Satellite Time 17 57 02 Ozean Region Azimut Date Wed Apr 30 2008 Elv Flight Information Channels Lat 47D0 0 1 N Ch Status C No Temp Frequency Long 14D59 59 6 E Pitch 0 0 Roll 0 0 Heading 348 0 True Track IER Speed O kn 1 data 56 4 dB Hz 61 5C 1648 45 MHz start MOBILE AERO 64K UDI 2 data 55 2 dB Hz 61 5C 1633 25 MHz start MOBILE AERO 64K UDI 3 no call 52 3 dB Hz 56 5C stop ACSE SUCCESSFUL ORR no call 52 2 dB Hz 56 5 C stop ACSE SUCCESSFUL ORR SCOTTY Start Capture The SCOTTY EMSHSD Software The field System shows the time and date of the transceiver Flight Information displays the current IRS information as received by the transceiver from the SCOTTY IRS system Please note that the Heading displayed is the true heading not the magnetic heading Satellite shows the INMARSAT satellite that is selected at the moment together with the azimuth and elevation data for the antenna pointing The status of the four channels is shown in the section Channels The column Status displays the current status of each channel like orr registration in progress no call channel is idle d
10. SCOTTY DA 42 MPP Rack Operator Manual Copyright 2008 SCOTTY Group plc All rights reserved SCOTTY Group plc SCOTTY retains copyright in this manual and associated user documentation the Documentation SCOTTY and its suppliers retain all copyright and other intellectual property rights in the software embedded in and associated with the product described in the documentation the Software Some products include unmodified software distributed under GNU General Public License GPL please contact SCOTTY for further information and source code No liability for consequential damages All rights reserved By purchasing the product described in the documentation you are granted a limited licence to use the Software provided you do not copy alter or adapt the Software in any way including decompiling disassembling or reverse engineering The information provided in the Documentation 1s believed to be accurate and reliable however SCOTTY assumes no responsibility for its use and reserves the right to revise the documentation without notice SCOTTY the SCOTTY logo Mobile ProMax Z470 Teleporter and Beamer are Trademarks of SCOTTY Group plc Microsoft and Windows are registered Trademarks of Microsoft Corporation Version 2 14 01 SD205864A SCOTTY DA 42 MPP Rack Table of Contents Reine 9 MA O A A 5 EZ Customer SUD POR t c 6 Z System Descriptloli etes eine a eon a enenatis
11. Transfer of Files during a Video Call Step 1 Establish a videoconference see chapter Making a Video iT Call Step 2 After connection has been established select the File Transfer button Step 3 Click on Add Step 4 In the Open dialog select the file to transmit and press Open step 5 Repeat Step 3 and Step 4 to add several files to the list step 6 Click on Send 1 The SCOTTY File Transfer is only possible between two SCOTTY systems using Teleporter or the File Transfer software Operator Manual SCOTTY DA 42 MPP Rack 3 14 Switching Cameras Step 1 Select a camera preset Preset A switches to the FLIR camera Preset B activates Video In 2 Preset C is available for user defined video and audio settings 3 15 Making a Still of the Video Step 1 Step 2 Step 3 Click on the Snapshot button The still is a now copied into the clipboard MN Open a Windows drawing software e g MS Paint and paste the copied still Save the document 3 16 Turning Off the System Step 1 Step 2 step 3 Step 4 Step 5 Step 6 Close the SCOTTY Teleporter main window with Xl and confirm the appropriate message Click on Start usually lower left corner Click on Turn Off Computer Select the option Turn Off Wait until Windows has finished shut down Turn off Bus 1 to 6 and then turn off Mission Master If the system is not shut down in the correct fashion data loss can occur
12. ata data call or no dial channel is not available The current signal level is displayed in the column C No The signal level should be greater that 48 dB Hz for stable calls The temperature of the channel card hardware is shown under Temp Operator Manual SCOTTY DA 42 MPP Rack During a call Frequency displays the uplink frequency The line after each channel s information columns shows detailed call status information for the channel like call type details call direction mobile or fixed error text when a connection is terminated and status information during the registration process Start Capture captures the raw data status data received from the SATCOM transceiver e g for diagnostic purposes The Open Terminal button opens a second window which enables direct access to the SATCOM transceiver s maintenance port Setup and advanced diagnostics are possible by using the terminal window 4 3 Troubleshooting No Power Check Mission Master Check Bus 1 to 6 Check Main ON OFF Switch of the SatCom Rack Check Fuses of the SatCom Rack No Calls Possible Check Line of Sight Check EMSHSD Status Display Status and Region Check EMSHSD Software Flight Information and Satellite Calls Start but No Connection Check Phone number and its format country code Check EMSHSD Status Display CH1 CH4 Check EMSHSD Software C N value Try other call direction e g incoming calls instead of outgoing calls
13. been destroyed e Insert the first recover CD with the serial number of the system e Reboot your system Booting from CD is enabled by default If this has been disabled carry out the following steps this can slightly differ depending on the actual BIOS Version Open the BIOS Setup by pressing Del at the begin of the boot sequence Select BIOS FEATURES SETUP change Boot Sequence to CDROM C A and save this change e The system will now boot from the CD ROM drive e The CD recover menu is displayed SCOTTY Tele Transport Corporation System Recover for 519999999 Please choose 1 Recover system partition only or system and data partition 2 Recover whole hard disc System data and recover partition 3 Exit e Select the menu entry Recover whole hard disc by pressing the key 2 e Confirm the security inquiry with Yes by pressing the key 8 Warning f the whole hard disk is restored to delivery state all data which has been stored to drives C or D after delivery or any additional recovery files are permanently lost When recovering from CD only the complete hard disk can be restored Recovering only the system partition can be performed without the recover CD see chapter Recovering the Delivery State The menu entry Recover system partition only displays appropriate help information for the user 21 SCOTTY DA 42 MPP Rack 5 1 3 Creating Recover CDs 22 New recover CDs can be created at any tim
14. e For this task an application is installed on your SCOTTY system which reads data from the recover partition and converts this data into bootable CD images iso files Using a standard CD burner software these files can be burned to 700MB CDs on any computer e Start Windows e Open the Windows Explorer and change to D Scotty e Start MakeCD by double clicking on the file e When asked for the password enter create e The iso files will be created this can take as long as 10 minutes or more The ready iso files are stored at DAScotty as well The file name is composed of the system s serial number and the ending PQI If more CDs are necessary the additional CDs obtain a consecutive number as ending Each iso file fits exactly on one 700MB blank CD It is important to finish the CD session If the SCOTTY system features a CD burner the CD burner software can be simply opened by double clicking at each 1so file Furthermore the 1so files can be transferred e g via network to another system and burned or archived there If the 1so files are not needed anymore they can be removed Operator Manual SCOTTY DA 42 MPP Rack 5 1 4 Creating Your Own Recover Files Operator Manual With the optional possibility to create your own recover files of the system partition any desired system state can be saved and restored at any time This so called Admin Image is stored in addition to the delivery state on the recover partition T
15. g The recording is saved under meg D Scotty Records with an automatically assigned name Step 4 The name of the saved recording is now displayed in the field File of the section Play and can be played back with the Play button 1f desired r1 Video can also be recorded during a video call Because the SATCOM Rack is optimized for surveillance operations it will record the local camera video not the video call 3 11 Playing Back a Video Step 1 From the standard toolbar of the SCOTTY main window select the Recorder button According to the setting under Options Recorder the MPEG Recorder is opened Step 2 In the section Play choose the Browse button select one of the recorded files on the hard drive and choose Open To play back a previously received file browse to the D Scotty Incoming directory Step 3 Press the Play button le 12 Operator Manual SCOTTY DA 42 MPP Rack 3 12 Transfer of Files with Automatic Hang Up Step 1 From the standard toolbar of the SCOTTY main window select the File Transfer button Step 2 Click on Add Step 3 In the Open dialog select the file to transmit and press Open Step 4 Repeat Step 2 and Step 3 to add several files to the displayed list Step 5 Click on Send Step 6 Select the entry of the desired party and click Dial 1 The SCOTTY File Transfer is only possible between two SCOTTY systems using Teleporter or the File Transfer software 3 13
16. herefore restoring an operational system is possible even if the Admin Image is damaged Such an Admin Image can be made for example after changes to the system configuration have been made or additional software packages were installed This system state can then be recovered directly at any time Without an Admin Image only the delivery state can be restored resulting in loss of these configuration or installation steps SCOTTY System Recover even enables creating a number of different Admin Images which can be stored on different CD sets Different system states can be archived by using this feature When needed they can be copied to the recover partition and restored from there Creating an Admin Image e Open the recover menu refer to chapter Recovering the Delivery State e Select the menu entry Create new Admin Image by pressing the key 6 e Enter the password You obtain this password during licensing Recovering an Admin Image e Open the recover menu refer to chapter Recovering the Delivery State e If an Admin Image is present on the system the following menu is displayed SCOTTY Tele Transport Corporation Version U2 1 xx system Recover for 519999999 Please choose Recover system and data partition with Factory Images Recover system partition with Factory Image Recover system partition with Admin and data partition with Factory Image Recover system partition with Admin Image Copy image from system reco
17. n Recover Piles par 23 Operator Manual SCOTTY DA 42 MPP Rack 1 Welcome 1 1 Welcome Operator Manual Welcome to the world of advanced communication welcome to the world of SCOTTY This manual has been designed to help you take full advantage of your SCOTTY solution It is not only a comprehensive guide to the operation of the system it also provides technical details simple step by step instructions on how to perform the most common applications and more We recommend you read this manual carefully in order to fully benefit from SCOTTY s advanced solutions Company background SCOTTY founded in 1994 and is headquartered in Austria with offices in the United Kingdom USA and the Philippines By recognising niche markets and offering customised products for specialised applications SCOTTY has gained enormous expertise in the development of live video audio and data communication through satellite and terrestrial networks Market sectors portable solutions vehicle solutions encryption solutions maritime solutions aero solutions Please find detailed information on our website www scottygroup com SCOTTY DA 42 MPP Rack 1 2 Customer Support Contacting SCOTTY s Customer Services amp Technical Support Europe Middle East Africa 43 316 409 426 support emea scottygroup com The Americas 1 770 825 0574 support americas scottygroup com Asia Pacific 63 2 833 7783 support asiapac scottygroup com If you
18. ry Step 1 From the standard toolbar of the SCOTTY main window F select the Dial button PES Step 3 Click New Entry Step 4 Enter name and number and press OK 10 Operator Manual SCOTTY DA 42 MPP Rack 3 Receiving a Call An incoming call is announced by the Incoming Call dialog box of the opened SCOTTY Teleporter Incoming Call Incoming Call from Test Laboratory p Bb3 2 2 Do vau want to take it The Incoming Call dialog box Step 1 Click Yes to accept the call If no action is taken the system reacts according to the pick up settings On default automatic pickup is activated and the call is put through after a moment s pause 3 8 Terminating a Call Step 1 The ongoing videoconference can be terminated by clicking Tr the Dial button y 3 9 Making a 256 kbit s Video Call Step 1 From the standard toolbar of the SCOTTY main window F select the Dial button ER Step 2 Select the entry of the desired party Step 3 In the field Dial Rate choose 4 Bonding Step 3 Select Dial r1 The unique SCOTTY Live Bonding feature is necessary for bonding calls over satellite links bay For calls with systems that do not support this protocol see chapter Making a Video Call Operator Manual 11 SCOTTY DA 42 MPP Rack 3 10 Recording a Video Step 1 From the standard toolbar of the SCOTTY main window select the Recorder button Step 2 Start the recording _ Step 3 Stop recordin
19. ue to changing the hard disk or because the recover partition has been destroyed the system can be brought back to delivery state by the recover CD In conclusion the SCOTTY System Recover has the following features e Restoring the delivery state of the system configuration without any recover CD the data partition will be conserved e Restoring the delivery state of the system configuration and the data partition without any recover CD e Restoring the delivery state of the complete hard disk using the bootable recover CD e Creating a new recover CD on the system e Protecting the individual functions against unauthorized access by assigning individual passwords e Optional Creating your own recover snapshots With this feature it is not only possible to restore the delivery state but additionally save and restore any other system state Contact your local SCOTTY representative on how to obtain a license for this feature 19 SCOTTY DA 42 MPP Rack 5 1 1 Recovering the Delivery State 20 Open the Recover Menu e Reboot your system e While booting the following menu is visible for a few seconds Recover Use the f and keys to select which entry is highlighted Press enter to boot the selected 05 or p to enter a password to unlock the next set of features e Select Recover by pressing the Page down key and Return e Enter restore when asked for the password e The system recover menu is displayed
20. ver CDs Create new Admin Image License necessary Info Exit Reboot 1 2 3 4 a b 7 A e The menu entry Recover system partition with Admin Image 4 recovers the system partition C to the state stored inside the Admin Image e The menu entry Recover system partition with Admin and data partition with Factory Image 3 recovers the system partition C to the state stored inside 23 SCOTTY DA 42 MPP Rack 24 the Admin Image In addition to this the data partition D is brought back to delivery state e The menu entry Copy image from system recover CDs 5 makes it possible to copy an Admin Image or the image containing the delivery state from a recovery CD to the recover partition Creating a Recovery CD for an Admin Image If a recover partition contains an Admin Image in addition to the factory image the user is asked for which image a bootable recover CD should be created see chapter Creating a Recover CD In order to distinguish between these two the iso files for the delivery state are assigned the ending A those for the Admin Image are assigned the ending B Recovering the System from Recovery CDs Before a different Admin Image can be recovered it has to be copied into the system using the menu entry Copy image from system recover CDs Warning The existing Admin Image will be overwritten After copying the Admin Image it can be restored see chapter Recovering an Admin Image Recovering the Hard
Download Pdf Manuals
Related Search