soundmaster ® - BuyCleverStuff
Contents
1. Preset gt or lt Preset gt and then Memory gt again to store the current station into memory Only when the radio is ON press Vol gt and Vol gt to adjust speaker volume At every minute boundary the real time clock is compared with the alarm setting if it has been enabled For details please refer to the section of When alarm is active Note The device will active RCC for synchronization in background for time update at the 1 01 amp 3 01 amp 5 01 everyday 2 2 Setthe clock Press Mode once when the unit stays in clock display mode The clock goes flashing the LCD GB2 ENGLISH The second keeps counting up once per second Press Up to advance the clock by 1 minute Press Down to move the clock back by 1 minute Press and hold Up or Down to set the clock in fast mode of 10 minutes per step Press Mode once to set the date Press other key to start its corresponding function When no key has been pressed for 10 seconds the current setting is confirmed and it switches to auto run mode 2 3 Setthe date Press Mode once in date setting mode The current date goes flashing in the format of dd mm yyyy in the LCD Press Up or Down to change the current setting by 1 day per step Press and hold UP or Down to change the setting in fast mode of 10 days per step Press Mode once to confirm the current setting and it switches to select dimmer Press other key to start its co2. soundmastel DEUTSCH NEDERLANDS ENGLISH ESPANOL FRANCAIS PORTUGU S UR2006 ENVIRONMENTAL PROTECTION Do not dispose of this product with the normal household waste at the end of its life cycle Return it to a collection point for the recycling of electrical and electronic devices This is indicated by the symbol on the product user manual or packaging The materials are reusable according to their markings By reusing recycling or other forms of utilization of old devices you make an important contribution to the protection of our environment Please contact your local authorities for details about collection points This symbol indicates the presence of dangerous voltage inside the enclosure sufficient enough to Risk of elactic shock cause electric shock o not open Caution To reduce the risk of electric shock do not remove the This symbol indicates the presence of important cover or back There are no user serviceable parts inside Refer operating and maintenance instructions for the servicing to qualified service personnel device Safety Environmental and Setup Instructions e Use the device in dry indoor environments only e Protect the device from humidity e Do not open the device RISK OF ELECTRIC SHOCK Refer opening and servicing to qualified personnel e Connect this device to a properly installed and earthed wall outlet only Make sure the mains voltage correspond
3. 1 second the selection of preset memory is considered as valid and the radio will be tuned to that frequency immediately with MUTE idle At any time press other key to start its corresponding function AMS Using When radio is On Press and hold lt AMS gt for 2 seconds to active AMS mode In this mode the radio will automatically scan the radio station and store the station that had been scanned until scan up all the frequency or stored all the memory station it will exit automatically GB6 2 18 ENGLISH RCC on off When device at the auto run mode turned off radio Press and hold Clock synchronization gt to active RCC update time volume grade icon flashing Press and hold Clock synchronization gt again to exit the function and volume grade icon disappear Electronic Volume Control When listening radio Press VOL gt once to increase speaker volume by one step Hold for continually Press VOL gt once to decrease speaker volume by one step Hold for continually BASS When listening radio Press and hold Bass to turn on or off the bass function 2 21 Key lock Press and hold the Memory for 2 seconds key lock has been switched ON the KEY goes solid Press and hold the Memory again for 2 seconds to release the key lock the KEY will disappear GB 7
4. hich has been enabled alarm becomes active e As the alarm becomes active the Cooking timer if exists is terminated immediately e f Beep sound alarm is selected 9 Sound of beep toggles at the Speaker e Muted Radio even radio on e The duration of alarm is 10 minutes e If Radio alarm is selected e Radio on e the duration of the alarm is 60 minutes e Press lt SNOOZE gt once postpone the currently active alarm for 9 minutes The alarm will be stopped and after 9 minutes will become active again e Press any key to terminate the currently active alarm even key lock has been switched on 2 11 When SDA is active e When the date month year matches with the SDA which has been enable alert becomes active e As the SDA active Sound of beep toggles at the Speaker for 10 minutes Muted Radio even radio ON amp The SDA goes flash on LCD display e The beep will sound ever hour for 10 minutes until 23 00 e Press any key to start its corresponding function and the SDA will be terminate 2 12 AOT Function e Press lt AOT gt once to review the current sleep timer The radio will turn ON if the radio has not been activated ENGLISH Press lt AOT gt again the change the current setting down to the nearest multiple of 5 minutes within 120 5 min Press AOT when the current setting is 5 min OFF goes solid which implies the sleep is cancel and radio will be keep ON 2 13 Radio Power On Off Press lt On Off gt once po
5. light with smooth dimmer work in 2 mode e Key lock function to prevent accidental keying e Radio frequency range Band Freq range Freq step FM 87 5 108 0 MHz 100 KHz Control Panel 1 AMS b Down Up Preset 2 3 4 5 Preset 6 AOT Snooze Clock synchronization 7 Memory 8 Timer 9 Mode Bass 10 Vol Alarm Set 1 11 Vol Alarm Set 2 12 LCD Display GB 1 ENGLISH 2 How to used As the unit is powered up the date and clock are defaulted to Saturday 1 Jan 2011 0 00 or 12 00AM The two alarms are defaulted to 0 00 or 12 00AM daily type but disabled The radio is switched off It then switches to auto run mode When unit is powered up first time RCC will be active automatically and volume grade icon flashing on LCD When the signal has been received and decoded successfully the real time clock is updated and volume grade icon solid press other key to start its corresponding function 2 1 Auto run Mode Radio OFF Press Mode once to set up different mode sequentially Auto run Mode Display showed Clock v Set the Clock M Set the Date v Dimmer Select Hi Lo v Set SDA Clock Format Sel ction 12 24 Hour Press lt Alarm 1 gt to review set the alarm 1 Press lt Alarm 2 gt to review set the alarm 2 Only when the radio is ON press Preset gt or Preset gt to recall the preset memories Only when the radio is ON press lt Memory gt
6. osed to excessive heat such as sunshine fire or the like e CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Used batteries are hazardous waste and NOT to be disposed of with the household waste As a consumer you are legally obligated to return all batteries for environmentally responsible recyling no matter whether or not the batteries contain harmful substances Return batteries free of charge to public collection points in your community or to shops selling batteries of the respective kind Only return fully discharged batteries marked Cd cadmium Hg mercury Pb lead ENGLISH General Description e Power supply AC AC adapter e FM Radio by PLL technology e Automatically time update by RCC signal e 12 24 Hour clock display e Ascending Alarm The buzzer sounds progressively loud in 4 levels e Built in calendar with auto leap year handling within 2000 2099 e 4mode dual alarms can be set to daily weekday week end and daily independently e X Alarm output can be set to radio or buzzer e Automatically Off Timer AOT and Snooze function provided e SDA special date alert Function e 10 user preset cooking Timer 1 minute to 23 59 e 30 memories preset radio station e Search Up Down features are provided e RCC Auto update time e A M S automatic memory store function provided e Electronic Volume Control e Bass enhance function e LED back
7. rresponding function When no key has been pressed for 15 seconds the current setting is confirmed and it switches to auto run mode automatically Select the dimmer Hi Lo Press Mode once in the Dimmer selecting mode The defaulted display show H Press Down or Up to switch dimmer Lo or Hi Press Mode once to confirm the current setting and it switches to select time format Press other key to start its corresponding function When no key has been pressed for 15 seconds the current setting is confirmed and it switches to auto run mode automatically When set to Dim mode press any key will automatically brighter 10 seconds Set up the SDA timer Press Mode once in the SDA set mode The date amp SDA goes flashing alternative Press Up or Down to set the Special Date Press AOT Snooze gt to ignore the year Press other key to start its corresponding function When no key has been pressed for 15 seconds the current setting is confirmed and it Switches to auto run mode automatically In case of ignore the year the SDA will be active ever year at same date 2 6 Select the clock format 12 24 Press Mode once in the 12 24 set mode GB3 2 8 ENGLISH The defaulted display show 24 Press Down or Up to switch 12 or 24 Press Mode once to confirm the current setting and it switches to auto run mode Press other key to start its corresponding function When no key has been pres
8. s with the specifications on the rating plate e Make sure the mains cable stays dry during operation Do not pinch or damage the mains cable in any way e Adamaged mains cable or plug must immediately be replaced by an authorized service center e In case of lightning immediately disconnect the device from the mains supply e Children should be supervised by parents when using the device e Clean the device with a dry cloth only Do NOT use CLEANING AGENTS or ABRASIVE CLOTHS e Do not expose the device to direct sunlight or other heat sources e Install the device at a location with sufficient ventilation in order to prevent heat accumulation e Do not cover the ventilation openings e Install the device at a safe and vibration free location e Install the device as far away as possible from computers and microwave units otherwise radio reception may be disturbed e Do not open or repair the enclosure It is not safe to do so and will void your warranty Repairs only by authorized service customer center e Only use mercury and cadmium free batteries e Used batteries are hazardous waste and NOT to be disposed of with the household waste Return the batteries to your dealer or to collection points in your community e Keep batteries away from children Children might swallow batteries Contact a physician immediately if a battery was swallowed e Check your batteries regularly to avoid battery leakage e Batteries shall not be exp
9. sed for 15 seconds the current setting is confirmed and it Switches to auto run mode automatically device will back to auto run mode Set up Cooking Timer When device at the auto run mode turned off radio Press Timer once to enter the timer mode Press Up or Down to adjust the value from 1 minute to 23hours and 59minute or press lt Preset gt or Preset gt to recall the preset value press Timer to start the cooking timer When the timer is running press Timer to pause the timer To restart the timer press Timer again When the timer remain 30 seconds the remind tone be will sound it also sound at 30s 25s 20s 16s 12s 9s 6s 4s 2s amp 1s the time reach to 00 00 the voice be be be be be will be heard Press Timer to terminate the timer and leave Press and hold Timer for 2 seconds to terminate the timer and leave when the timer is running As the alarm becomes active the cooking timer if exists is terminated immediately Timer Value Preset There are 10 preset Cooking timer When device at the auto run mode turned off radio Press Timer once to enter the timer mode Press Memory once the T goes flash Press Preset gt or Preset gt to select press Memory again to store the timer value Press Up or Down to adjust the value from 1 minute to 23hours and 59minute Press the Timer to start the timer press and hold Timer for 2 seconds
10. to exit the timer mode 2 9 ALARM1 and ALARN2 setting When device at the auto run mode turned off radio Press Alarm Set 1 or Alarm Set 2 once ALARM1 or ALARM2 goes solid in the alphanumeric section The current setting of HH MM and the type of alarm goes flashing by the corresponding day flags Press Up to advance the setting by 1 minute Press Down to move the setting back by 1 minute GB 4 ENGLISH e Press and hold Up or Down to change the setting in fast mode of 10 minutes per step e Press lt AOT Snooze gt to change the type of alarm between daily weekday weekend and daily independently which are reflected by the 7 day flags e Press and hold lt AOT Snooze gt to enter daily independently mode Press AOT Snooze gt again to select the day and it will reflect by the day flags Press and hold AOT Snooze gt to leave the daily independently mode and return select daily weekday and weekend e Press same alarm key which is Alarm Set 1 or Alarm Set 2 gt once to select the output format of the alarm Output format LCD displa Bell symbol goes solid Radio output Radio symbol goes solid Disable All the Bell and Radio are cleared e Press other key to start its corresponding function e When no key has been pressed for 15 seconds the system goes back to auto run mode 2 10 When alarm is active e When the real time clock matches with the alarm w
11. wer on the radio and the station frequency show on LCD Press lt On Off gt again power off the radio and return to Auto Run Mode 2 14 Radio reception Press lt On Off gt once the station frequency show on LCD Press Up once to change the receiving frequency up by 1 step Press Down once to change the receiving frequency down by 1 step Press and hold Up to search the next radio station by moving the receiving frequency up Press and hold Down to search the next radio station by moving the receiving frequency down 2 15 Recall radio preset memory There are 30 preset memory stations for the radio When the radio is ON press Preset gt or Preset gt to select the memory MEM goes solid the frequency of the memory goes solid in the LCD When new preset memory is selected MUTE is active When keying the preset memory has been released for 1 second the selection of preset memory is considered as valid and the radio will be tuned to that frequency immediately with MUTE idle At any time press other key to start its corresponding function 2 16 Store into memory 2 17 There are 30 preset memory stations for the radio Press Memory once the MEM goes flash Press lt Preset gt or Preset gt to select the desired preset memory station press Memory again to store the frequency When new preset memory key is pressed MUTE is active When keying the preset memory has been released for
Download Pdf Manuals
Related Search