User`s Manual - Elane.net Home
Contents
1. SCALE CALIBRATION FOR ADVANCED USERS ONLY In case the scale loses its accuracy then the re calibration of the scale may be needed The load cell of this precision scale is normally protected against overloaded weight applied slowly but overload caused by dropping the scale or dropping something heavy on the scale may require re calibration CAUTION Please do not attempt any calibration by yourself unless you have a 500 gram weight available Otherwise the scale will render itself into a useless state and requires servicing If the scale did come from a colder or warmer environment let it first stay for sometime to be at the same temperature as your current environment Plug the mains adapter to the power supply The scale will turn on and display Elane then Selftest Press Zone 1 key while it displays selftest The scale will then ask you to put a 500 gram weight on the platform The scale will indicate that you need to wait as it automatically recalibrates the scale When it is done the scale will restart automatically ERROR MESSAGES Under Load During start up if the zero frequency of the scale is less than the software defined range the scale will display Under Load Remove Weight If the scale is ON with the weight placed or if the scale is ON ona non vibrating surface or if the zero frequency is more than the software defined range the scale will display Remove Weight Overload If the weight placed on the platform is more tha2. creen THE DISPLAY a SERVICE The default display shows the service on the leftmost part of the first line of the LCD In this case Service Sr Standard Regular is the default The second character indicates the zone number when in air mode A b WEIGHT The weight is displayed at the rightmost part of the first line c POSTAGE On the second line below the weight the corresponding postage is displayed It is recommended to leave the scale always plugged in do not switch off mains power socket A small current will keep the weighing mechanism in operating temperature even while the scale is off To tare the current weight on the scale press Zero key All subsequent weight displays will be tared B POSTAL SELECTIONS Basic Services 1 Standard Regular Standard Large T3 Singapore wakes up in the Standard Regular mode when first switched on The above two services toggle in one key First press of this key shows Standard Regular rates when weight is less than or equal to 40 grams Second press shows Standard Large rates When in Standard service the display switches from Standard Regular to Standard Large when weight is greater than 40g but if weight is greater than 2000g service will switch to SpeedPost IslandWide Parcel Non Standard Press Non Standard Mail key to activate Non Standard service The display switches from Non Standard to SpeedPost IslandWide Parcel when weight is greater than 2000g Surfac
3. e Mail Press Surface Oversea key to display Surface Mail rates to all countries except Malaysia and Brunei Airmail Press Zone 1 Zone 2 Zone 3 or Zone 4 keys to display desired rates for Airmail SpeedPost Isl andWide Parcel Press SpeedPost IslandWide Parcel key to display rates for this service
4. n the capacity of the scale it will display Overload Excesswt If the weight placed on the platform is more than the weight range of the particular postal service it will display ExcessWt D oO C LJ mi A User s Manual T3 Singapore Electronic Postage Computing Scale BASIC TECHNICAL DETAILS Maximum Capacity 3000 g Accuracy 1g Tare Unlimited up to scale s maximum capacity Power Supply 9 12 volt AC adapter Power Consumption Dimensions Weight Overall 734 x 51 2 x 21 4 Platform 5 x 5 opens for flats Unit Weight 520g Packaged Weight 1050 g Approx 400mW BASIC SERVICES AVAILABLE 1 a PWN Standard S Regular Sr Large SI Non Standard NS Surface Oversea Surface Mail SO AirMail Zone 1 2 3 4 A1 A2 A3 A4 SpeedPost IslandWide Parcel SPI INSTRUCTIONS A START UP INSTRUCTIONS and DISPLAY 1 Plug the mains adapter supplied with the scale into the mains and connect the adapter s output plug to the input socket at the rear of the scale 2 Place the scale on a firm level surface then switch on the mains supply The Scale will then go through an electronic self test for 1 3 seconds If the Scale is not stable the display will not change If excess TARE or other LOAD is being applied the display will read overload until the excess weight is removed When the Scale has passed the self test and is ready for weighing the default display will show on s
Download Pdf Manuals
Related Search