User Manual OZO-PEN Portable Ozone Generator
Contents
1. The operate the OZO PEN the follow the steps below 1 If water to be treated contains suspended solids remove solids either by filtration or decantation 2 If water to be treated contains chlorine it is preferable to remove the chlorine by filtering the water with an activated carbon filter before ozonating with the OZO PEN See picture of activated carbon filter below 3 Place filtered and or decanted water in a container preferably made of glass 4 If water to be treated is low in TDS Total Dissolved Solids and a high concentration of dissolved ozone is desired greater than 0 2 ppm add 0 5 1 0 gram per litre of table salt to the water Stir until salt dissolves 5 Plug OZO PEN power supply into an electric outlet 6 Plunge the ozone generating section section with holes of the OZO PEN into the water Hold OZO PEN from its handle Do not immerse OZO PEN entirely in the water 7 Stir the OZO PEN in the water for at least 30 seconds to 1 minute per litre of water to be treated Ozone and mixed oxidant bubbles should form at the surface of the OZO PEN 8 To remove precipitates that may have formed during the treatment or excess ozone if desired filter the water through an activated carbon filter as shown in picture below 9 Store ozonated water in a closed container preferably made of glass for later use OZO PEN with pitcher type carbon filter Maintenance After a period of use a layer of hardness may accumu2. OZO PEN Portable Ozone Generator User Manual A patent pending technology by OZOMAX Inc 600 Robitaille Shefford Quebec Canada J2M 1X2 Tel 450 378 6825 Fax 450 777 0264 OZO PEN Standard Model Standard Features 1 Precious metal anode need never to be replaced 2 15 30 VDC power supply Optional Features 1 Battery operation 2 Solar panel operation 3 Timer for on off use Specifications Ozone output 1 ppm in 1L tap water after 1 minute under following conditions TDS 2 700 ppm Power supply 30 VDC 1A Dimensions 21 5 cm long x 1 5 cm 8 5 in long x 0 6 in 9 Weight 200 g 0 45 Ibs Power 15 30VDC 1A Typical Data The concentration of ozone and mixed oxidants produced by the OZOPEN is a function of the conductivity of the water to be treated as dictated by its TDS Total Dissolved Solids level The figure below shows that as the TDS level of the water to be treated increases so does the ozone concentration produced Higher dissolved ozone levels may be achieved in high TDS water in a shorter time than in low TDS water OZO PEN Standard Model Ozone Production in Water with Different TDS Levels 1L of Water Treated 30VDC 1000 mA power supply Q c Oo 4 Se Par c oO c O O c O N O xe eb 2 Oo 2 A Time minutes mmm ater TDS 600 ppm Water TDS 120 ppm Method of Use
3. late on the surface of the OZO PEN When this occurs clean the OZO PEN as follows 1 Dip a cloth in regular table vinegar 2 Using the cloth rub off the hardness layer 3 Rinse with water
Download Pdf Manuals
Related Search