Home

ManualsLib - Makes it easy to find manuals online!

1. e For logging data automatically check the E e E Automatic Data Log section below For pressure humidity logging data manually check the previous Manual Data Log D The Elements of a Data Note Record andiData 1 The log memory can log up to 256 records and 1980 data 2 If log memory is full a MEMORY FULL MEMORY message will display for few seconds Delete FULL some data or transfer the data to PC if necessary 3 Always check the memory level before data logging Memory Full Display Downloaded from www Manualslib com manuals search engine 15 1 Data Log Mode Data Log Display and Free Memory Display the date that the time that this record this record was logged was logged the record no of data no of this logged by record this record Data Log Display 3 seconds the free FREE 1350 memory 06 MAR 2003 2 10 30 r001 0023 Free Memory Display _ NO data is found DATALOG NO RECORD r000 0000 Data Log Display NO Record Data Log Mode Functional Displays Data Log Mode includes two different functional displays they are the Free Memory Display and Data Log Display Free Memory Display and Data Log Display will be appeared alternatively for every 3 seconds In the above displays the date of which the record was logged appears on the 2nd row of the display The time of which the record was logged appears on the 3rd row of the display The data number and r
2. ADCc SUMMIT User Manual Downloaded from www Manualslib com manuals search engine 1 0 General Guide Thank you for purchasing your new ADC We recommend reading this manual and WARNING practicing the operations before using your ADC in the field e Make sure that you fully understand the functions and limitations of the ADC before relying on it The ADC is designed to provide you with e The ADC is an assisting device for the information essential to your needs Data outdoor user and is not a substitute for such as temperature wind speed barometric weather advisories from a weather pressure altitude and humidity are features Station It is helpful to check the specific to four different ADC models Wind readings provided by this product Summit Pro and JetSet periodically with those broadcasted by the weather station Each ADC model is constructed to withstand water submersion and is ideal for conditions you endure during outdoor activities such as hiking climbing hunting kayaking skiing and racing Every ADC also includes current time daily alarm chronograph and race timer functions ADCs are equipped with a propeller and other precise sensors to measure outdoor conditions Downloaded from www Manualslib com manuals search engine 2 0 Care and Maintenance Prevent getting dirt in the ADC propeller It could clog the mechanism Avoid exposing this product to extreme heat or extre
3. all record vee nE Geta Eg on Data Log Mode Setting Sequence Activated set PC SYNC set PG SYNG DEL ALL START 2 SIOPY NO pa ifthe send Ready completed Sending Inactivated PC Synchronization To Select Setting Display e Press and hold the mode button for about 2 seconds to select the Data Log Mode Setting Display the VO starts flashing e In setting display press the mode button to select among the settings following the adjacent diagram 1 When the NO starts to flash press the set button to select between YES delete the record that is displaying and NO Display 2 When the interval digits starts to flash press the set or reset button to scroll to select the target auto log interval hold down the button to scroll the setting at a faster pace 3 When the PC SYNC START starts to flash press set button to send the data from the ADC to PC 4 When the NO starts to flash press the set button to select between YES delete all records and NO Display e When the above setting completed press and hold the mode button for about 2 seconds to confirm the setting and exit the setting sequence Downloaded from www Manualslib com manuals search engine pcsync START en Ee PC SYNC STOP ifthe send _ Ready completed Sending PC Synchronization Infrared Port Pointing this port towards the ADC IR connected toaPC
4. this data will become the last one of the data list Delete a Existing Record e f the displaying record is erased the record will shift it s location onward following the adjacent diagram Loga new data Record Acquire a New Data Record 2 Record 2 Delete a Record 3 record Delete a Record Downloaded from www Manualslib com manuals search engine Delete Logging the current interval data setting Delete PC all Record fare amp Data Synchronization Data Log Mode Setting 15 4 0 Data Log Mode Data Log Mode Setting Data Log Mode Setting e The following functions can be performed in the Data Log Mode Setting 1 Delete the current data 2 Set the logging interval for auto log 3 Enable the PC Synchronization transfer data from the ADC to PC 4 Delete all data e Check the PC Synchronization section below for more detail on the communication between the ADC and PC Downloaded from www Manualslib com manuals search engine 15 4 1 Data Log Mode Setting Data Log Mode flash DEL 06 MAR 2003 DEL 06 MAR 2003 Iset 2 10 30 2 10 30 r001 0023_ r001 0023 DATALOG 06 MAR 2003 this data to be deleted Inactivated 2 10 30 r001 0023 Activated Delete the Current Data g a Display rode hold mode Tbaee the model i Auto Log record that Interval is displaying Setting mode mode DEL ALL MES Delete
5. 1 The mode indicator BARO Indicator and the barometric pressure unit appear on the 1st row of the display 2 The ambient Barometric Pressure appears on the 3rd row of the display To Change Barometric Pressure Unit e The ADC can display Barometric Pressure in the following units 1 Hecto Pascal hPa 2 milli bar mb 3 Inches of mercury inHg e In Barometer Mode press the reset button to change the barometric pressure unit following the adjacent diagram Downloaded from www Manualslib com manuals search engine 13 2 Barometer Mode Pressure History Graph for the Last 24 Hours BARO hPa 1001 3 Barometer Mode mode set flashing bar represents the selected record graphical bar 24 hour the pressure of the selected record numeric 0 hour current the time that took this record Pressure History Graph Display hold reset reset hold set set Select the record by backward scrolling from current to 24 hour 1 hour per step Select the record by forward scrolling from 24 hour to current 1 hour per step Select the lap time by forward scrolling fast scrolling Select the lap time by backward scrolling fast scrolling Pressure History Graph e The ADC is equipped with a barometric pressure memory function It records the last 24 hours barometric pressure readings and it can display them by bar graph e In Barometer Mode press the s
6. 15 5 Data Log Mode PC Synchronization Transfer Data from the ADC to PC The ADC is equipped with a function to transfer backup the data from the ADC to PC To be able to transfer data to a PC the accessory ADC IR optional extra is needed Following the previous Data Log Mode Setting Sequence to select the PC Synchronization Display In the above PC Synchronization Display press the set button once to activate the synchronization The data of the ADC will send to the target PC Note Start the PC s communication software prior to the transmission Check the PC s hardware and software manual for the detail on how to transfer and receive data via infrared device Make sure that the infrared port of the ADC is pointing towards the target ADC IR infrared port during the transmission Downloaded from www Manualslib com manuals search engine Erase a Diye Record reset A reset me data i data ll data i hold record mode Record Data Log Display or gt Free Memory Display Data The Elements of a Data Data Log Mode Review Data Log mode set mode t hold mode Record no amp Data no ambient Logging time amp date temperature current altitude at the wind speed current location ambient barometric pressure 15 6 0 Data Log Mode Logged Record and Data To review Logged D
7. Indicator and the wind speed unit appear on the 1st row of the display 2 The Beaufort Scale calculated by average wind speed appears on the 2nd row of the display 3 The Current Wind Speed appears on the 3rd row of the display 4 The maximum and average wind speed appears on the 4th row of the display To Change Wind Speed Unit e This ADC can display wind speed in the following wind speed units 1 Km h Kilometer per hour 2 mph mile per hour 3 feet s feet per second 4 m s meter per second and 5 Knots e In Wind Speed Mode press the reset button to change the wind speed unit following the adjacent diagram Downloaded from www Manualslib com manuals search engine Beaufort Scale by average wind speed Wind Speed Mode Beaufort Scale calculated by average wind speed force force force no 1 no 5 no 10 Example A Number 5 of Beaufort Scale Beaufort Scale calculated by average wind speed force force force no 1 no 8 no 10 7 Example B Number 8 of Beaufort Scale _Average Wind Speed 11 3 Wind Speed Mode What is Beaufort Scale What is Beaufort Scale e Beaufort Scale is the longest and most widely used set of criteria to describe the wind conditions and its effects on land as well as on sea e It categorizes the wind speed into 13 force numbers from 0 calm to 12 hurricane Check the Beaufort Scale Table section below for more detail on the
8. is 2 and the current Select the setting by Select the setting by temperature is 26 degrees C the ADC will forward scrolling backward scrolling display 28 degrees C 26 2 fast scrolling fast scrolling 2 The current wind chill temperature will be updated as above accordingly Downloaded from www Manualslib com manuals search engine 24 Hour Pressure Stormy Alarm History Graph Pressure Manual Calibration Data Log Barometer Mode Functions 13 0 Barometer Mode Barometer Mode Function Barometer Mode Functions e The ADC has the following barometric pressure functions 1 The 24 Hour Pressure History Graph The Barometric Pressure Memory for the last 24 hours 2 Storm Alarm The alarm that alerts the user when the upcoming weather is stormy Check the coming Storm Alarm section for more detail on the Storm Alarm 3 Calibration The process to calibrate the Barometric Pressure reading 4 Manual Data Log The function to log the sensor functional mode readings that are currently obtained from sensors Downloaded from www Manualslib com manuals search engine Mode Indicator f lt Unit Current Barometer Mode hPa reset reset reset Pressure Barometric Pressure Barometric Pressure Unit Selection Sequence 13 1 Barometer Mode Barometer Display Barometer Display e In Barometer Mode the display will show the following
9. reset button to scroll by 1 to select the target offset value hold down the button to scroll the setting faster When the above settings finished press the mode button once to exit the calibration setting sequence To return to Altimeter Mode press and hold the mode button for about 2 seconds to exit the setting sequence or press the mode button to set the other settings Note 1 When the altitude has been calibrated the ADC will offset the current altitude by the target offset value For example If the offset value is 20 and the current altitude is 144 the ADC will display 164 144 20 2 The maximum and minimum altitude will NOT be updated as the above Downloaded from www Manualslib com manuals search engine 15 0 Data Log Mode Data Log Function Data Log Function A e The ADC is equipped with a function to log f 1 f the sensor functional mode data These data l data l data l recor data are the current wind speed ambient temperature barometric pressure relative Free Memory Display Record Data Log Display humidity and the altitude at the current location A ee e This data also includes the time and date ecord no ata no i Logging time amp date temperature that the logging was taken e The ADC can log data automatically log a current altitude at the data at a preset interval or manually wind speed current location
10. seconds e Check the coming Setting the Race Timer Mode section for more detail on how to set the target time in Racer Timer Mode Race Timer Display e In Race Timer Mode the display will show the following 1 The mode indicator RACE TIMER appears on the 1st row of the display 2 The target time hours minutes seconds appears on the 3rd row of the display e The maximum counting range of the Race Timer is 99 hours 59 minutes and 59 seconds Downloaded from www Manualslib com manuals search engine 9 1 Race Timer Mode Setting the Race Timer Mode RACE TIMER aol trough T Scroll e settings e setting a 0 10 00 increment y a faster es reset t hold reset Race Timer Mode mode hold hold mode mode _secons mode mode Race Timer Mode Setting Sequence hold set set scroll Hough scroll the settings by the setting at decrement a faster pace To Select the Setting Display Setting the target time in Race Timer Mode press and hold the mode button for about 2 seconds to select the setting display the second digits will start flashing Setting Sequence In setting display press the mode button to move setting following the adjacent diagram When the one of the settings second minute hour start to flash press the set or reset button to scroll through the settings hold down the button to scroll at a faster pace When the sett
11. 0F 23 3C 10F 23 3C Very Cold Wind Chill Temperature Effects What is Wind Chill Temperature e Wind chill is a temperature factor that combines air temperature and the effect of blowing wind e As blowing wind makes you feel as though the temperature is lower than simple air temperature e For example if it is 9 4 degrees Celsius and the wind blows at 80 5 km per hour People will feel as if the temperature is 23 3 degrees Celsius In this case the wind chill temperature is 23 3 degrees Celsius e The ADC is also equipped with wind chill temperature functions including displaying current and minimum wind chill temperature and having a wind chill temperature alarm Note e Wind chill temperature is the effect that combines wind speed and temperature the ADC must measure the wind speed in order to display the wind chill temperature e Check the previous Before Using the Wind Speed Mode section for more detail on Wind Speed Measurement Downloaded from www Manualslib com manuals search engine Temperature Mode hold reset he RESET MIN moge b h W CHILL ea 18 2 N flashing Maximum Wind Speed Reset Display NO hold mode confirm the reset set Note This diagram illustrates the general flow among different functional displays only and may not conform to fact in all instances RESET MIN W CHILL 18 2 flashing Maximum Wind Speed Reset Disp
12. 8 0 gt CH relative 28 0 C speed temperature barometric pressure humidity and the altitude at the current location will Barometric Pressure Altitude appear one by one Downloaded from www Manualslib com manuals search engine 16 0 Specifications A Current Time Mode e Hour minute and second e Month day day of week and year e 12 24 hour format selectable e Auto calendar from year 2003 to 2099 Wind Speed Mode e Current Average and Maximum Wind Speed e Beaufort Scale for Average Wind Speed e 5 Wind Speed Unit Selection Km h mph feet s m s and Knots e User defined time span for Average Wind Speed calculation e User defined Wind Speed Alarm Temperature Mode e Current Temperature and Current and Minimum Wind Chill Temperatures e User defined Wind Chill Temperature Alarm e Graphical and numerical displays for temperature for the last 24 hour Barometer Mode e Current Barometric pressure e Storm Alarm e User defined offset for Calibration e Graphical and numerical displays for barometric pressure for the last 24 hours Altitude Mode e Current Average and Maximum Altitude e Air Density and Relative Air Density e Density Altitude e Altitude Alarm e User defined offset for Calibration e Ski Run Counter Ascending and Descending Distance Downloaded from www Manualslib com manuals search engine 16 1 Specifications B Data Log Mode e Log data includes loggin
13. Beaufort Scale Beaufort Scale Bar e For user s convenience the ADC displays Beaufort Scale for average wind speed e The ADC exhibits Beaufort Scale by displaying different number of bars on the upper row of the display One exhibited bar is equivalent to one Beaufort Scale force number For example if there are 5 bars on the display the average wind speed is equivalent to force number 5 of Beaufort Scale The ADC displays the Beaufort Scale force number from 0 to 10 if the average wind speed is higher than force number 10 the ADC will display 10 Downloaded from www Manualslib com manuals search engine 11 4 Wind Speed Mode Beaufort Scale Table Beaufort International of haimbor m s MPH Description Observed conditions 0 lt 1 lt 1 Calm Calm smoke rises vertically Directions of wind shown by smoke 1 1 3 Light air drift but not by wind vanes Wind felt on face leaves rustle 2 2 4 7 Light breeze vanes moved by wind Leaves and small twigs in constant motion 3 4 8 12 Gentle breeze wind extends light flag Raises duct loose paper 4 7 13 18 Moderate small branches moved Small trees in leaf begin to sway 5 10 19 24 Fresh crested wavelets form on inland waters Large branches in motion whistling heard 6 12 25 31 Strong in telephone wires umbrellas used with difficult Whole trees in motion resistance felt walking iG 15 32 38 Near gale against wind 8 18 39 46 Gale Breaks twigs off trees impedes
14. Function ON OFF Setting ALTITUDE m hold YES or NO is flashing press the set US reset Ski Run Imod ski Run button to select between the Ski Run ON OFF Reset Function ON and OFF 2237 2418 f Imode mode e When the YES Display is flashing press Ski Run Display EE and hold the mode button for about 2 hold Seh E PERUR seconds to confirm the setting and exit the mod Boast eco setting sequence Ski Run Function will turn A Secueece e When the NO Display is flashing press and hold the mode button for about 2 seconds to abort the setting and exit the setting sequence Downloaded from www Manualslib com manuals search engine 14 3 2 Altimeter Mode To Reset the Ski Run Counter Ascend amp Descend SKIRUN SKIRUN RESET YES set RESET NO ALTITUDE m SKIRUN 99 144 2237 2418 Activated Inactivated Ski Run Counter Reset Setting Ski Run Display hold mode hold reset Ski Run mode ski Run Function Counter ON OFF Reset t mode J mode DESCEND Ski Run mode ski Run RESET YES Descend Ascend Reset Reset 2237 2418 Ski Run Counter Ascend and Descend Reset Activated Setting Sequence set ASCEND ASCEND RESET YES sel RESET NO NO 2237 2418 2237 2418 2237 2418 Activated Inactivated Inactivated Accumulative Descend Reset Setting To Reset Ski Run Counter Ascending and Descending Altitude e F
15. Log Current Max and Average Scale Wind Speed Wind Speed Mode Functions 11 1 Wind Speed Mode Wind Speed Mode Function Wind Speed Mode Functions e This ADC has the following wind speed functions 1 The Beaufort Scale The longest and most widely used set of criteria to describe the wind conditions Check the coming Beaufort Scale section for more detail on Beaufort Scale 2 The Current Maximum and Average Average Wind Speed 3 Wind Speed Alarm alarm that alerts the user when the current wind speed is higher than the predefined level 4 Wind Speed Display Lock This feature can lock the wind speed display for 5 seconds 5 Time Span Setting This feature defines the time for the Average Wind Speed Calculation Check the coming Time Span Setting for Average Wind Speed section for more detail on the setting 6 Manual Data Log The function to log the sensor functional mode readings that is currently obtained from sensors Downloaded from www Manualslib com manuals search engine 11 2 Wind Speed Mode Wind Speed Display Mode Wind Indicator Speed Unit Beaufort Scale by average wind speed Current Wind Speed Maximum A Average Wind Speed Wind Speed i Wind Speed Mode reset reset reset reset reset Wind Speed Unit Selection Sequence Wind Speed Display e In Wind Speed Mode the display will show the following 1 The WIND
16. ain for every 2 minutes if the current is still equal or higher than the preset value e The repeated alarm beeps will stop until the altitude is equal or higher than the preset value or the Altitude Alarm is set to OFF Desirable Range Downloaded from www Manualslib com manuals search engine 14 6 0 Altimeter Mode Altitude Mode Setting Altimeter Mode Setting hold e The following functions can be performed in ALTITUDE m mode l the Altimeter Setting Mode Atude Aaea 1 Altitude Alarm Settings 144 lt Setting Display a ON or OFF 734 807 old b Target Altitude Level for alarm mode 2 Altitude Calibration Altitmeter Mode Altimeter Mode Setting Sequence To Select the Setting Display e To select the setting display press and hold the mode button for about 2 seconds altitude digits will start flashing e In the setting display press the mode button to select between the Altitude Alarm Setting and Altitude Calibration Display e Check the Altitude Alarm Setting and Altitude Calibration sections below for more detail on the above settings Downloaded from www Manualslib com manuals search engine Altitude Alarm Setting Alarm OFF Alarm ON ALTITUDE m 40FF ALTITUDE m 40N 144 144 hold reset scroll the scroll i I setting b the setting aA faster of 1 step reset 18004 flash 14 6 1Altimeter Mode Setting the Altitu
17. ata e The adjacent diagram shows the operations for employing a review on the logged data e Check the To Select the Logged Record and To Review the Logged Data sections below for more detail on how to review logged data Downloaded from www Manualslib com manuals search engine 15 6 1 Data Log Mode To Select the Logged Record reset reset the next Logged Record To Select the Logged Record e Press the reset button to scroll forward to select the target record the logging time and date among the logged records from record 1 to the last record following the adjacent diagram DATALOG 06 MAR 2003 Data Log 0023 e If a record is selected the logging date and Record 1 this record Inesei time appear on the 2nd and 3rd row of the consist of display The record number and the total Zoda number of data stored by such record reset e appear on the 4th row of the display Record When the target record is displaying press the set to enter the Data Selection Record Selection Sequence Sequence Check the To Review among set pone neces Logged Data section below for more detail data set reset on how to select target data RXXX 000 no 06 MAR 2003 set reset the next Logged Data set Data Log Display reset Data 1 O42 setitreset tme iasi Logged Data Selection Sequence Data Downloaded from www Manualslib
18. available lap time s reading In setting displays press the set button to scroll the through the settings Downloaded from www Manualslib com manuals search engine 4 1 Button Operation Summary 2 reset Button In Chronograph Mode counting Press the reset button to get Lap Time Display In Chronograph Mode stop counting Press XN the reset button to reset the display to zero light In Timer Mode stop counting Press the light reset button to reset the timer to target time In Lap Time Recall Mode Press the reset button to select the available lap time s i In setting displays press the reset button to reset scroll the through the settings light Button In any functional mode display press the light Note button once to turn ON the EL backlight for The button operations are about 3 seconds summarized in the following paragraphs for detail operating instructions please continue reading Downloaded from www Manualslib com manuals search engine 5 0 Major Functional Modes BARO hPa mode mode WIND mph mi LT 1001 3 21 3 18 3 8 3 Barometer Mode Temperature Mode Wind Mode Current Time Mode Daily Alarm Mode mode mode mode ALTITUDE m mode PE RACE TIMER mode 144 i 2 10 30 0 10 00 734 80 r001 0023 Altitude Mode Data Log Mode Race Timer Mode Chronograph Mode Sensor Function Time Function Major Functional Modes Downloaded from www Ma
19. bient temperature wind speed and it also tells compass directions One of the propeller blades is red colored to indicate the magnetic north pole Four reference points were engraved on the ADC as reference points To use the Mechanical Compass To check bearing of an object make sure that the propeller cover is opened and the blades are entirely exposed to air Tilt the ADC until the propeller blades are parallel to the horizon and the propeller blades rotate freely The red colored blade of the propeller will points to the magnetic north pole Make use of the reference points marked on the product to check the direction of the target object Downloaded from www Manualslib com manuals search engine Current Minimum Wind Chill Temperature Current Temperature Wind Chill Temperature Alarm Temperature History Graph Temperature Manual Calibration Data Log Temperature Mode Functions 12 0 Temperature Temperature Functions Temperature Mode Functions e The ADC has the following temperature functions 1 The Current Temperature The Current Temperature readings 2 The Current and Minimum Wind Chill temperature The wind effect on temperature Check the WindChill Temperature section below for more detail on Wind Chill Temperature 3 The Temperature History Graph The temperature memory for the last 24 hours 4 The Wind Chill Temperature Alarm alarm to alert the us
20. chill temperature nolda reset mode RAS y alarm ON and OFF E RET e When the above settings finished press and mE scroll the canbranoni ceting DiEplay hold the mode button for about 2 seconds the setting setting by Check Calibrating to exit the setting sequence faster of 1 step the Temperature section below for more detail Downloaded from www Manualslib com manuals search engine 12 7 Temperature Mode Calibrating the Temperature To Select Setting Display e Following the previous Setting the Wind Chill Temperature Alarm section to select the Calibration Display e In the Calibration Display press and hold the reset button for 2 seconds to select the Temperature Calibration Display Calibration Setting Display The Setting Sequence e When the offset value digits are flashing press the set or reset buttons scroll through to select target offset value hold mode hold reset the offset down the button to scroll the setting at a me valie faster pace wind chill temperature current e When the above settings finished press the ampera mode button once to exit the setting Calibration Setting Display sequence hold reset reset hold set set Note E E 1 When the temperature has been calibrated setting by setting by the ADC will offset the current temperature forward scrolling backward scrolling by the target offset value For example If the offset value
21. com manuals search engine 15 6 2 Data Log Mode To Review the Logged Data To Review the Logged Data e Following the previous To Select the Logged Record section to select the target data set reset no RXXX 000 06 MAR 2003 set the next 2 10 30 reset Logged record 28 0 gt C lt lt gt gt Data Once a record is selected z set e Press the reset button to scroll forward to a Oe ay Inesei select the target data among the logged t set reset eles data from data 1 to the last data following Logged the adjacent diagram Data Data Selection Sequence Or press the set button to scroll backward to select the target data among the logged data from last data to data following the adjacent diagram If a data is selected the record number and wind speed R001 0001 R001 0001 logging 06 MAR 2003 date amp data number appear on the 1st row of the ime display The logging date and time the time rene such data was logged appear on the 2nd Date amp Time Wind Speed and 3rd row of the display The temperature ij mode mode and relative humidity appear on the 4th row record __ data no of the display Ay R001 o001 a R001 0001 e To review the other information of the 1001 3 hPa mode 144 m selected data press the mode button barometric 2710 30 aa 2 10 30 following the adjacent diagram The wind pressure 2
22. d e You can log another record at any desirable moment as long as there is sufficient memory e Check the coming Logged Record and Data section for more detail on how to review the logged data Downloaded from www Manualslib com manuals search engine 11 0 Wind Speed Mode Before Using the Wind Speed Mode e When the propeller faces the wind it Propeller Closed Propeller Opened e Turn the ball shape propeller by your thumb propeller to a closed position to prevent dirt display S make sure that the blades rotate freely the propeller _ How Wind Speed is Measured Saaba e The ADC is equipped with a propeller that is Q similar to a traditional aerovane rotates and generates signal This product will pick up the signal and converts it into wind speed Before and After Measuring a Wind Speed and index finger until the propeller blades are entirely exposed and it is not sheltered wind 4m wind by the case i e After a wind speed measurement rotate the from getting into it To Measure Wind Speed e Select Wind Speed Mode Point the blades directly towards the wind direction and e When the wind passes through the propeller the blades rotate The ADC starts to measure and shows the current average and maximum wind speed readings Point the Propeller towards the wind direction Downloaded from www Manualslib com manuals search engine Beaufort Wind Speed Display Lock Time Span Setting Data
23. d from www Manualslib com manuals search engine 6 2 Current Time Mode Weather Forecast Symbols Weather Forecast Symbols POC Rr FS Sunny Partial Cloudy Rainy Stormy Cloudy Weather Forecast Display Current Time Mode Note e When the ADC has been reset or the battery has been replaced partial cloudy symbol will be displayed To get an accurate weather forecasting the ADC must stay at the same altitude for over 12 hours Weather Forecast Symbol e The ADC includes a weather forecast function that predicts the weather for the next 12 hours e The ADC will display the forecasted weather by the weather forecast symbol There are five kind of weather forecast symbols they are the Sunny Partial Cloudy Cloudy Rainy and Stormy What Does the Weather Forecast Symbol indicate e A Sunny symbol generally indicates improving weather or sunny weather ahead e A Partial Cloudy symbol generally indicates slightly cloudy weather ahead e A Cloudy symbol generally indicates deteriorating weather or cloudy weather ahead e A Rainy symbol generally indicates adverse weather or rainy weather ahead e A Stormy symbol generally indicates stormy weather ahead Downloaded from www Manualslib com manuals search engine Status Alarm ON Alarm ON Display set Indicator Alarm OFF Display Daily Alarm Mode _ Mode indicator Alarm ON OFF Alarm time 7 0 Daily Ala
24. de Alarm To Set the Altitude Alarm e Following the previous Altimeter Mode Setting Sequence to select the Altitude Alarm Setting Display When the altitude alarm digits are flashing press the reset button to scroll by 1 to select target altitude level hold down the button to scroll the setting faster or press the set button to select the between altitude alarm ON and OFF When the above settings finished press and hold the mode button for about 2 seconds to exit the setting sequence or press the mode button to set the other settings Downloaded from www Manualslib com manuals search engine ALTITUDE m ADJUST the offset value _ the current value Altitude Calibration Display mode hold reset ALTITUDE m ADJUST flashing Calibration Setting Display hold reset reset hold set set Select the Select the setting by setting by forward scrolling backward scrolling Select the setting by Select the setting by forward scrolling backward scrolling fast scrolling fast scrolling 14 6 2 Altimeter Mode Calibrating the Altitude To Calibrate the Altitude Following the previous Altimeter Mode Setting Sequence enter the Calibration Display When the Calibration Display appears press and hold the reset button for about 2 seconds to select the Calibration Setting Display When the offset value digits are flashing press the set or
25. des three different altitude readings Current Minimum and Maximum Altitude Current Altitude e Current Altitude is reading that measured by the air pressure at your current location time Minimum Altitude e Minimum Altitude is the accomplished minimum altitude record It will be superseded if a lower altitude is subsequently achieved Maximum Altitude e Maximum Altitude is the accomplished maximum altitude record It will be superseded if a higher altitude is subsequently achieved Note e During the first three minutes of Altitude Display the ADC needs one second to get a reading e After the first three minutes of Altitude Display the ADC needs one minute to get a reading e Reset the maximum or minimum altitude prior to recording a new one check the To Reset the Maximum and Minimum Altitude section below to reset the respective reading Downloaded from www Manualslib com manuals search engine ALT Maximum Altitude Reset Display NO set RESET MAX ALT Maximum Altitude 734 RESET MAX mode mode Reset Display YES ALTITUDE m 144 80 Max Min Display hold reset flashing RESET MIN Ne flashing 734 Minimum Altitude Reset Display NO set RESET MIN ALT 27 flashing flashing Minimum Altitude Reset Display YES 14 4 1 Altimeter Mode To Reset Minimum and Maximum Altitude To Res
26. e button to select the Chronograph Recall Display In Chronograph Recall Display the total elapsed time will appear To recall the individual lap time press the set or reset button to select the target lap time hold down the button to scroll the setting faster following the adjacent diagram In Chronograph Recall Display press and hold the mode button to return to the Stop Counting Display Chronograph Recall Display In Chronograph Recall Display the display will show the following 1 The mode indicator CHRONO RECALL appears on the 1st and 2nd row of the display 2 The lap time hours minutes seconds appears on the 3rd row of the display 3 The lap number and lap time 1 100 second appears on the 4th row of the display Downloaded from www Manualslib com manuals search engine Mode Indicator Target Time Hour minute second 1 Single phase down et counting set 2 Multi phases down set counting 30 3 Reset to preset set target time RACE TIMER 0 10 00 Race Timer Mode a set set set reset 10 20 30 0 time l Single multi down Counting amp Reset veces Stop Counting gt Counting Ce 40 9 0 Race Timer Mode Race Timer Display The Target Time e The ADC is equipped with a countdown timer to keep track of a fixed period of time target time e The user can set a target time of up to 99 hours 59 minutes 59
27. ecord number appear on the 4th row of the display If NO data is found on the Data Log Mode the VO RECORD display appears The Data Log Display The mode indicator DATALOG appears on the 1st row of the display The Free Memory Display The free memory appears on the 1st row of the display Downloaded from www Manualslib com manuals search engine 15 2 Data Log Mode Automatic Data Log To Log Data Automatically Auto Log e Press and hold the set button for about 2 seconds in the Data Log Mode to enable or disable the automatic log function e When the function is enabled a LOG indicator appears the ADC will log a data at the predefined interval e Check the Setting the Data Log Mode section DATALOG 06 MAR 2003 hold set 2 10 30 is r001 0023 DATALOG 06 MAR 2003 2 10 30 r001 0023 Data Log Displa Data Log Displa i Auto Loa OFF Aute Lod ON below for more detail on how to set the interval logged logged logged logged Record 1 _ _ _ _ 4 set 10 seconds fold set hold set as the interval a set eeg 0 10 20 30 40 Te sec logged logged logged logged Record 2 _ _ _ 4 set 30 seconds hold set hold set as the interval to sell to Ea 0 30 60 90 TE sec Automatic Data Log Downloaded from www Manualslib com manuals search engine 15 3 Data Log Mode Data and Record Administration Log a New Data e When a new data is logged
28. er when the current Wind Chill Temperature is lower than the predefined limit 5 The Calibration The process to calibrate the temperature reading 6 Manual Data Log The function to log the sensor functional mode readings that is currently obtained from sensors Downloaded from www Manualslib com manuals search engine Mode Indicator Current Wind Chill Temperature Temperature Mode reset Temperature Unit Current Temperature IN Minimum Wind Chill Temperature 12 1 Temperature Temperature Display Temperature Display e In Temperature Mode the display will show the following 1 The TEMP Indicator and the temperature unit appear on the 1st row of the display 2 The Current Temperature appears on the 3rd row of the display 3 The Current and Minimum Wind Chill Temperature appear on the 4th row of the display To Change Temperature Unit e The ADC can display temperature in the following units 1 Degree Celsius C 2 Degree Fahrenheit F e In Temperature Mode press the reset button once to change the temperature unit See adjacent figure Downloaded from www Manualslib com manuals search engine 12 2 Temperature Mode Wind Chill Temperature Current Wind Chill Temperature Temperature Weather Wind Case Conditions le NO wind 15F 9 4C 15F 9 4C Cold 2 windspeed 15F 9 4C 10F 23 3C Very at 50 mph Cold 80 5 km h 3f NO wind 1
29. et button to select the Pressure History Graph Display e While in the Temperature History Graph Display the right most bar will start flashing e The right most bar represents the current temperature 0 hour while the other bars represent the pressure records of the last 24 hours Each pressure record is taken at the hour i e 12 00 1 00 and 2 00 e To browse the pressure record at different times press the set button to scroll the record backward from the current record to the 24 hour record or press the reset button to scroll the record forward from the 24 hour record to the current record e Press the mode button once to exit the Pressure History Graph Display Downloaded from www Manualslib com manuals search engine Weather Forecast Symbols 4 Stormy Weather Forecast Display 13 3 Barometer Mode About Storm Alarm About Stormy Alarm e The alarm gives beep alert when the ADC predicts the upcoming weather as stormy e Then in the Current time Weather Forecast Display the stormy weather forecast symbol will appear Storm Alarm Sound elf the stormy weather forecast symbol appears the ADC starts beeping for about 30 seconds e The ADC will NOT beep again unless another stormy condition is predicted Downloaded from www Manualslib com manuals search engine hold mode BARO hPa 1001 3 Barometer Mode hold hold mode mode Alarm OFF A
30. et the Maximum and Minimum Altitude e To reset the maximum and minimum altitude press and hold the reset button for about 2 seconds to select the Reset Display e When the Minimum Altitude Reset Display is displaying press the mode button to select between the Maximum and Minimum Altitude Reset Display e When the VO or YES Display is displaying press the set button to select between the YES and NO Display e When the YES Display is displaying press and hold the mode button for about 2 seconds to confirm the reset of the respective altitude i e the maximum or minimum altitude the maximum or minimum altitude will be reset to zero e To abort the reset press and hold the mode button for 2 seconds in the NO Display Downloaded from www Manualslib com manuals search engine 14 5 Altimeter Mode Altitude Alarm Altitude Alarm e The ADC is equipped with an altitude alarm e That alarm alerts user when the current altitude is equal to or higher than the preset altitude level Altitude Undesirable Range ea aan e Check the Setting the Altimeter Mode ayel e minutes section below for more detail on how to set the altitude level for the alarm Altitude Alarm Sound e In Altitude Mode When the current altitude is equal to or higher than the preset altitude level the ADC starts beeping for about 5 seconds The Altitude Alarm e After the first beeping the ADC will beep ag
31. evel the ADC starts beeping for about 5 seconds e After the first beeping the ADC will beep again for every 2 minutes if the current wind chill temperature holds at or below the preset value e The above repeated alarm will stop unless the wind chill temperature equals or drops below the preset value or the wind chill temperature alarm is set to OFF Downloaded from www Manualslib com manuals search engine 12 6 Temperature Mode Setting the Wind Chill Temperature Alarm To Select Setting Display Wind Chill Temperature Alarm and hold Temperature Calibration e To select the setting display press and hold mode eee eee the mode button for about 2 seconds to A select the setting display temperature digits Temperature Tener site will start flashing slik Eo The Setting Sequence mia e When the temperature digits are flashing Temperature Mode press the mode button to select between the Wind Chill Temperature Alarm Setting Windle hilitemperature er PEE and Temperature Calibration Display T a On albration MisPlay following the adjacent diagram Check the Calibrating the Temperature section below for more detail on temperature calibration e When the temperature digits are flashing press the reset button to scroll through to select target wind chill temperature level hold down the button to scroll the setting at a faster pace or press the set button to select the between wind
32. forward scrolling backward scrolling fast scrolling fast scrolling 13 5 Barometer Mode Calibrating the Barometric Pressure To Calibrate the Barometric Pressure e Following the previous Setting the Storm Alarm section to select the Calibration Display e In the Calibration Display press and hold the reset button for 2 seconds to select the Calibration Setting Display e When the offset value digits are flashing press the set or reset button to scroll to select the target offset value hold down the button to scroll the setting at a faster pace e When the above settings finished press the mode button once to exit the setting sequence Setting Pressure relative to Sea Level 1 When the barometric pressure has been calibrated the current barometric pressure w i offset by the target offset value 2 To be able to read the current barometric pressure as a pressure referring to sea level although at an altitude calibrate as follows Check the current altitude for example 1000m Divide 1000 8 since 1 hPa mbar is 8m altitude Result 125 hPa mbar Set offset to 125hPa mbar The reading will now refer to the pressure at sea level Downloaded from www Manualslib com manuals search engine Accumulative Ascend amp Descend Altitude Current Min amp Max Altitude Altitude Altitude Calibration Alarm manual Data Log Altimeter Mode Functions 14 0 Altimeter Mode Alti
33. g time and date wind speed barometric pressure altitude and temperature e Manual and Automatic Data Log e User define logging interval for automatic data log e Data transfer from the ADC to PC via the infrared synchronization ADC IR unit is required Daily Alarm Mode e Daily Alarm 1 daily alarm e Alarm Duration about 30 seconds Chronograph Mode e Resolution 1 100 second e Counting range 99 hours 59 minutes 59 99 seconds e Measurement Elapsed time accumulative elapsed time and lap time e Lap memory 50 laps Race Timer Mode e Resolution 1 second et limit 99 hours 59 minutes 59 seconds e Alarm sound e Last 10 minutes beep once for every minute e Last 10 seconds beep once for every second e 0 second beeps for about 2 seconds Others e Electro luminescent back light turns on for 3 seconds when activated Downloaded from www Manualslib com manuals search engine 16 2 Accuracy resolution and units Wind Speed Up to 3 0 m s better than 10 Over 3 0 m s better than 5 Resolution 0 1 m s Units m s km h mph knots ft s Temperature Better than 1 Celsius degree offset calibration possible Resolution 0 1 degree Units Celsius Fahrenheit Barometer Better than 1 5mb 700 1100 mb offset calibration possible Resolution 0 1 hPa Units hPa mbar inHg Altimeter Better than 3 meter provided properly calibrated Resolution 1
34. gs increment hold reset scroll the setting at a faster pace set scroll road the settings decrement hold set scroll the setting at a faster pace olen hold hold mode mode mode 1 12124 second reset Second to zero 12 changes to 24 24 JE to 12 or ial mode mode 4 E gae oo year month indier mode 4 minute sd ase date Current Time Setting Sequence 6 1 Current Time Mode Setting the Current Time Mode To Select Setting Display e Setting the current time and date and their display formats press and hold the mode button for about 2 seconds to select the setting display the 12 indicator will start flashing The Setting Sequence e In setting display press the mode button to move the setting following the adjacent diagram e When the 72 or 24 digits starts flash press the set or reset button to switch between 72 12 hour format and 24 24 hour format When the second digits starts flash on the display press set or reset button to reset the second to zero e If one of the settings minute hour year month date starts flash press the set or reset button to scroll through the setting hold down the button to scroll the setting at a faster pace e When the above settings finished press and hold the mode button for about 2 seconds to exit the setting sequence Downloade
35. ing finished press and hold the mode button for about 2 seconds to exit the setting sequence The setting display will change to Race Timer Mode automatically if no key stoke has been activated for about 1 minute Downloaded from www Manualslib com manuals search engine RACE TIMER 0 10 00 stop Stop Counting Display set the target time to 30 minute RACE TIMER set 0 30 00 Stop Counting Display reset stop Note This diagram illustrates the general flow among different functional displays only and may NOT conform to fact in all instances counting counting counting RACE TIMER STOPPED 0 00 00 Stop Counting Display RACE TIMER RUNNING 0 29 59 Counting Display set RACE TIMER j STOP 0 29 59 Stop Counting Display 9 2 Race Timer Mode Using the Race Timer To Use the Race Timer e Once a target time has been set press the set button once to start the countdown When it is running press the set button again to stop the countdown e The countdown time will be displayed continuously throughout the operation To Reset the Timer e To reset the timer to the preset target time before the countdown reaches zero press the reset button once when the timer has been stopped e To set a new value for the target time check the previous Setting the Race Timer Mode section for more detail on how t
36. larm ON rset BARO hPa 21 STORM ON 1001 3 BARO hPa STORM OFF 1001 3 current Alarm OFF barometric pressure Storm Alarm Setting Alarm ON Storm Alarm and Pressure Calibration Setting Sequence mode f Stormy Pressure Alarm Calibration Pressure Calibration Display BARO__ hPa hold mode reset Calibration Setting Display Check the Calibrating the Temperature section below for more detail 13 4 Barometer Mode Setting the Storm Alarm Select the Setting Display e Press and hold the mode button for about 2 second to select the setting display the ON or OFF will start flashing Setting Sequence e In the setting display press the mode button to move the setting following the adjacent diagram e When the ON or OFF starts to flash press the set button to select the Stormy Alarm between ON and OFF e When the above settings finished press and hold the mode button for about 2 seconds to exit the setting sequence Downloaded from www Manualslib com manuals search engine BARO__ hPa Pressure Calibration Display mode hold reset BARO _ hPa OFFSET the offset value the current value Calibration Setting Display hold reset reset hold set set Select the setting by forward S ing Select the setting by backward scrolling Select the setting by Select the setting by
37. lay Yes 12 3 Temperature Mode To Reset Minimum Wind Chill Temperature To Reset the Minimum Wind Chill Temperature e To reset the minimum wind chill temperature press and hold the reset button for 2 seconds to select the Reset Display e When the Reset Display is displaying press the set button to select between the YES and NO Display e In the YES display press and hold the mode button for about 2 seconds to confirm the reset the minimum wind chill temperature will reset to zero e To abort the reset press and hold the mode button for 2 seconds in the NO display Downloaded from www Manualslib com manuals search engine 12 4 Temperature Mode Temperature History Graph for the Last 24 Hours Temperature Mode mode set 24 hour 0 hour current flashing bar the temperature _ represents ofthe selected __ record numeric the selected record graphical bar current wind chill the time that took this record Temperature History Graph Display hold set set hold reset reset Select the record by backward scrolling 1 hour per step Select the record by forward scrolling 1 hour per step Select the lap time by backward scrolling fast scrolling Select the lap time by forward scrolling fast scrolling Temperature History Graph e The ADC is equipped with a temperature memory function It records the last 24 h
38. ld the mode button for 2 about seconds to confirm the reset the maximum wind speed will reset to zero e To abort the reset press and hold the mode button for 2 seconds in the NO display Downloaded from www Manualslib com manuals search engine 11 6 Wind Speed Mode Wind Speed Alarm Wind Speed Alarm e The ADC is equipped with a wind speed alarm Wind Speed e That alarm alerts user when the current wind speed is equal to or higher than the preset wind speed level Wind Speed Alarm Sound e In Wind Speed Mode if the Current Wind Speed is equal to or larger than the preset wind speed level the ADC will start beeping for about 5 seconds e After the first beeping the ADC will beep again for every 2 minutes if the current wind The Wind Speed Alarm Range speed holds above the preset level e The above repeated alarm will stop unless the wind speed again exceeds the preset level or the wind speed alarm is set to OFF Alarm Range preset gt wind speed level Below Alarm Range Downloaded from www Manualslib com manuals search engine 11 7 Wind Speed Mode Setting the Wind Speed Alarm and Time Span hold Wind Speed Alarm and mode Time Span Setting Sequence mode bed J ea Time Span 21 3 4 Alarm Setting Wind Speed Mode Wind Speed Alarm Setting Alarm OFF Alarm ON Time Span Setting WIND mph AVG PERIOD hold reset reset hold reset re
39. me cold for an unreasonable amount of time Avoid severe impacts to the ADC Store the ADC in a dry place when it is not in use Clean the ADC with a soft moistened cloth occasionally DO NOT expose the ADC to strong chemicals such as gasoline and alcohol as they will damage this product Downloaded from www Manualslib com manuals search engine 3 0 Part description North Orientation blade RED 1st row 2nd row 3rd row auTaw Propeller blades Display mode _ Se gt light Infrared Port light send data from this product to PC via this port Buttons reset Detachable Belt Clip Downloaded from www Manualslib com manuals search engine 4 0 Button Operation Summary 1 mode Button Press the mode button to select among the major function modes In function modes Press and hold the mode button to select setting display In any setting display Press the mode button to select among different settings Press and hold the mode button to exit setting sequence mode 7 set Button set In Current Time Mode press the set button to select the Daily Alarm Display In Daily Alarm Mode Press the set button to switch the daily alarm between ON and OFF Note In Chronograph Mode and Race Timer Mode summarized in the following counting paragraphs for detail operating In Lap Time Recall Mode Press the set button instructions please continue to select the
40. meter Units meter feet Time Better than 1 sec day Weather Forecast 5 weather forecast symbols that predict the coming 12 hour weather Downloaded from www Manualslib com manuals search engine 17 Warranty Brunton Two Year Warranty Brunton warrants this product to be free of defects in materials and workmanship for a period of two years This warranty extends to the original purchaser from the date of purchase This warranty is void and a charge for repair will be made if the ADC has been damaged by negligence accident or mishandling or has not been operated in accordance with standard operate procedures or if the ADC was altered or repaired by anyone other than a Brunton repair facility This warranty gives you specific legal rights and you also have rights which vary from state to state No other eee expressed or implied applies to the Brunton product nor is any person or company authorized to assume any other warranty for Brunton Brunton does not assume any responsibility for an consequential damages occasioned by this proe iei Should the pogue prove defective contact Brunton and you will be provided with a Return Authorization Number RA Send a copy of your proof of purchase the RA a short description of the problem and the product to Brunton at the following address Brunton suggests ene the product in case of damage or loss in shipment Brunton Warranty Repair 307 857 4700 2255 Bru
41. meter Mode Functions Altimeter Mode Functions e This mode has the following functions 1 The different altitude readings Current Minimum and Maximum Altitude 2 The Accumulative Ascend and Descent Altitude The sums of the ascending descending distance for ski sport 3 The Altitude Alarm Alarm sounds when the current altitude is higher than the predefined level 4 Altitude Calibration The process to calibrate the altitude reading 5 Manual Data Log The function to log the current sensor readings WARNING e The ADC estimates altitude by air pressure Hence these altitude values may be changed if air pressure changes DO NOT rely on the ADC for those activities that demands commercial standard Downloaded from www Manualslib com manuals search engine 14 1 Altitude Mode Functional Displays Ski Run number ALTITUDE m SKI RUN 994 144 2237 2418 Accumulated Descent Ski Run Display Accumulated Ascent set Altitude Mode unit Indicator a Current Altitude Max Min Altitude Altitude Max Min Display Altimeter Mode Functional Displays e Altimeter Mode includes three different functional displays they are the Ski Run Display Max Min Display and Air Density Display e In Altimeter Mode press the set button to select between the above displays following the adjacent diagram e In the above displays the indicator ALTITUDE and altitude unit ap
42. n Counter Accumulative Ascending Altitude and Accumulative Descending Altitude e The Ski Run Counter registers the number of ski runs e The Accumulative Ascending Altitude and Accumulative Descending Altitude registers the total ascend or descend altitude during the ski runs e When the Ski Run functions is ON 1 The ADC will record a Ski Run count Counter 1 automatically when a ski run has descended 15 meters point A to B or point D to E 3 The ADC will record a new ski run record Counter 1 once a 30 meters ascend point C to D is completed before another ski run record is allowed to be registered e Check the To Turn the Ski Run Function ON and OFF section below for more detail on how to set the function ON and OFF Downloaded from www Manualslib com manuals search engine 14 3 1 Altimeter Mode To Turn Ski Run Function ON and OFF To Turn Ski Run Function ON and OFF Ski Run Function ON OFF Setting i r e To select the setting display press and hold Suren aei the reset button for about 2 seconds the YES or NO will start flashing e In setting display press the mode button to select between the Ski Run Function ON OFF Setting and the Ski Run Reset Settings following the adjacent diagram Check the eae haidimodi To Reset the Ski Run Counter Ascend amp o mode i i E e Ski Run Descend section below for more detail on Function OFF Fametion ON reset setting e When the Ski Run
43. nton Court Riverton WY 82501 support brunton com www brunton com To register this product Print this form fill out and Send to Brunton at BRUNTON WARRANTY 2255 Brunton Court Riverton WY 82501 Name Address City State Zip Phone Email Date Purchased Amount Paid Would you like to receive a Brunton Catalog Yes No Please let us know where you purchased your ADC Store Name City State Zip Online site Catalog Gift Brunton Other Do you own another Brunton Product Yes Product No purchased this Brunton ADC primarily for Profesional Use It was a gift It looked cool Recreational Use Other Downloaded from www Manualslib com manuals search engine BRUNTON ADC SUNMMIT Downloaded from www Manualslib com manuals search engine
44. nualslib com manuals search engine 6 0 Current Time Mode Functional Displays habeas US orecas Symbol Pate Current Day of week Time Current Temperature Weather Forecast Display 5 Seconds Mode ALTITUDE Indicator Current Altitude Altitude Display 5 Seconds 5 Seconds Mode BAROMETER Indicator Current Barometric Pressure Barometer Display Current Time Mode Functional Displays e Current Time Mode includes three different displays the Weather Forecast Display Altitude Display and Barometer Display e The above displays rotate through every 5 seconds e The current time relative humidity and current temperature appear on the 3rd and 4th row of the display respectively Weather Forecast Display e In Weather Forecast Display the weather forecast symbol and day of week appear on the 1st and 2nd row of the display respectively Check the coming Weather Forecast Symbols section below for more detail on the means of the weather forecast symbols Altitude Display e The indicator ALTITUDE appears on the 1st row of the display The altitude at the current location appears on the 2nd row of the display Barometer Display e The indicator BAROMETER appears on the 1st row of the display The current barometric pressure appears on the 2nd row of the display Downloaded from www Manualslib com manuals search engine Current Time Mode reset scroll eai the settin
45. o set the Racer Timer Mode Race Timer Alarm Sound e At the last 10 minutes the Alarm will beep once for every minute e At the last 10 seconds the Alarm will beep once for every second e At zero the Alarm will beep for about 2 seconds Downloaded from www Manualslib com manuals search engine BARO hPa WIND Km H minimiin 1001 3 21 3 18 3 8 3 Barometer Mode Wind Mode ALTITUDE m 144 734 80 Altitude Mode Sensor Functional Mode hold set Record no amp Data no ambient Logging time amp date temperature current altitude at the wind speed current location pressure ambient barometric Data The Elements of a Data 10 0 Sensor Functions Mode Manual Data Log Function Data Log Function e The ADC is equipped with a function to log the sensor functional mode readings They are the current wind speed ambient temperature barometric pressure and the altitude at current location e The record also includes the time and date that data was logged e The ADC can log data automatically or manually Check the Automatic Data Log section below for more detail on how to log data automatically To Log the Data Manually Manual Log e To log a data manually press and hold the set button for about 2 seconds in one of the functional modes Temperature Wind Speed Barometer and Altimeter e When two beeps sounds the record is logge
46. ollowing the previous To Turn Ski Run Function ON and OFF section to enter the Ski Run Reset Setting e Press the mode button to select between the Ski Run Function ON OFF Setting and the Ski Run Reset Settings following the adjacent diagram e When one of the YES Displays is flashing press and hold the mode button for about 2 seconds to confirm the reset and exit the setting sequence the respective Ski Run reading will be reset to zero e When one of the NO Displays is flashing press and hold the mode button for about 2 seconds to abort the reset and exit the setting sequence e IMPORTANT Accumulative ascend and descend will only work when Ski Run function is activated ON Downloaded from www Manualslib com manuals search engine 14 4 0 Altimeter Mode Altitude Max Min Functions altitude m i Highest point Highest point Lowest End Starting Lowest End Starting point point point point point point reset the max A minaltitude Trail 1 Trail 2 This Product will display Trail 1 Trail 2 at pointA at point B Maximum Altitude 500 m 550 m 500 m 550 m 1 Minimum Altitude 150m 200m 150m 150 m 2 Note 1 The maximum altitude will be updated as a higher altitude 550m gt 500m is reached 2 The minimum altitude will NOT be updated as there is NO further lower altitude 150m lt 200m accomplished Altitude Max Min Display e Altitude Max Min Display inclu
47. or press the reset button to reset the chronograph Check the below To Reset the Chronograph section for more detail on how to reset the chronograph To Record a Lap Time e When the chronograph is counting in the previous operations press the reset button to display Lap Time Display for 10 seconds e When the Lap Time is displaying the chronograph remains counting in the background To Reset the Chronograph e To reset the chronograph to be ready for a new operation press the reset button once when the chronograph has stopped counting The display will then return to Zero Display Downloaded from www Manualslib com manuals search engine Select the lap time by backward scrolling fast scrolling CHRONO hold mode Stop Counting Display CHRONO RECALL 0 02 02 20 Select the lap time by backward scrolling 1 lap per step t hold set set Lap Time Recall Display Total Time at reset Select the lap time by forward scrolling fast scrolling Select the lap time by forward scrolling 1 lap per step CHRONO sel CHRONO RECALL set RECALL 0 02 02 0 04 02 Lap No Lap Time Recall Display Lap 1 Time Lap 2 Time reset set Lap Time Recall Display Next Available Lap Time s 8 2 Chronograph Mode Recall the Lap Time To Recall the Lap Time In Stop Counting Display press and hold the mod
48. our temperature and displays them by bar graph e In Temperature Mode press the set button to select the Temperature History Graph Display e While in the Temperature History Graph Display setting the right most bar will start flashing e The right most bar represents the current temperature 0 hour While the other bars represent the temperature records of the last 24 hours Each temperature record is taken at the hour i e 12 00 1 00 2 00 e TO browse the temperature record at different times press the set button to select the record by backward scrolling or reset button to select time by forward scrolling hold down the button to scroll the setting at a faster pace e Press the mode button once to exit the Pressure History Graph Display Downloaded from www Manualslib com manuals search engine Wind Chill Temperature High Temperature Range preset wind chill gt temperature level Low Temperature Range Time The Wind Chill Temperature Alarm 12 5 Temperature Mode Wind Chill Temperature Alarm Wind Chill Temperature Alarm e The ADC is equipped with a wind chill temperature alarm e That alarm alerts user when the current wind chill temperature is equal to or lower than the preset wind chill temperature level Wind Chill Temperature Alarm Sound e In Temperature Mode When the Current Wind Chill Temperature is equal to or lower than the preset wind chill temperature l
49. pear on the 1st row of the display and the current altitude appears on the 3rd row of the display Altitude Ski Run Display e In this display the number of Ski Runs appears on the 2nd row of the display and the accumulated ascent and descent appear on the 4th row of the display Altitude Max Min Display e In this display the maximum and minimum altitude appears on the 4th row of the display Downloaded from www Manualslib com manuals search engine 14 2 Altimeter Mode To Change Altitude Units To Change Altitude Units e The ADC can display altitude following units 1 Meter m 2 Feet ft reset e In any of the functional displays Ski Run Max Min and Air Density Display press the reset button to select the altitude unit following the adjacent diagram Select among the Altitude Units Altimeter Mode in the Downloaded from www Manualslib com manuals search engine Mode eee C uni naea ar ALTITUDE m SKI RUN 994 Ski Run Current i counter Altitude 144 1 2237 2418 Accumulated Accumulated Ascent Descent Ski Run Display Altimeter Mode record altitude m ski run count ean count A counter 1 counter 1 Starting End Starting End point point point point Ski Run 1 Ski Run 2 14 3 0 Altimeter Mode Altitude Ski Run Display Ski Run Display e The ADC is equipped with functions to register ski runs They are the Ski Ru
50. rm Mode Daily Alarm Display Daily Alarm Display e In Daily Alarm Mode the display will show the following 1 The mode indicator DAILY ALARM appears on the 1st row of the display 2 The ON or OFF status indicator appears on the 2nd row of the display 3 The alarm time hour and minute appears on the 3rd row of the display To Select Daily Alarm between ON and OFF e To select the daily alarm between ON and OFF press the set button once e When the daily alarm is ON the Alarm ON Indicator appear otherwise it is OFF Daily Alarm Sound e When the daily alarm is ON the product will beep at the predefined alarm time for about 30 seconds e When the beep sounds it can be stopped prematurely by pressing any of the buttons except the light button Downloaded from www Manualslib com manuals search engine scroll the setting by increment of 1 reset hold hold mode mode E Daily Alarm Mode scroll the setting by decrement of 1 scroll the setting faster gt hold reset mode Hour l mode Daily Alarm Mode Setting Sequence set hold set scroll the setting faster 7 1 Daily Alarm Mode Setting the Daily Alarm Mode To Select the Setting Display e Setting the Daily Alarm Time press and hold the mode button for about 2 seconds to select the setting display the minute digits will start flashing The Setting Sequence e In set
51. set scroll scroll irough scroll scroll trough the setting at the settings by the setting at the settings by a faster pace increment a faster pace decrement To Set the Wind Speed Alarm and Time Span for Average Wind Speed Calculation e To set the wind speed alarm press and hold the mode button for about 2 seconds to select the setting display wind speed starts flashing e When the wind speed is flashing press the mode button to select between time span setting and wind speed alarm setting e When wind speed is flashing press the reset button to scroll the target wind speed level by 1 step hold down the button to scroll the setting faster To select the wind speed alarm between ON and OFF press the set button e When time is flashing press the set or reset button to scroll the target time span for average wind speed calculation by 1 hold down the button to scroll the setting faster e Press and hold the mode button for about 2 seconds to exit the setting sequence e The setting display will change to Wind Mode automatically if no key stoke has been activated for about 1 minute Downloaded from www Manualslib com manuals search engine North East A North Target object pole red colored blade Using the Propeller as a Mechanical Compass propeller 11 8 Wind Speed Mode Using the Propeller as a Mechanical Compass Propeller as a Mechanical Compass e The ADC measures am
52. ting display press the mode button to move the setting between minute and hour settings e When one of the settings minute and hour digits start to flash on the display press the set or reset button to scroll through the setting hold down the button to scroll the setting at a faster pace e When the setting finished press and hold the mode button to exit the setting sequence e The setting display will change to Current Time Mode automatically if no key stoke has been activated for about 1 minute Downloaded from www Manualslib com manuals search engine 8 0 Chronograph Mode Chronograph Display Mode Indicator Chronograph Time second Chronograph Time hour N Chronograph Time See Chronograph Mode 1 100 Second Zero Display 1 Elapsed time set set 2 Accumulative elapsed time set set set set oa oa ow set reset reset 3 Lap time 10 20 30 40 time i j Elapsed Time Accumulative Elapsed Time and Lap Time errno Stop Counting Counting Chronograph Function e The ADC is equipped with a Chronograph Mode it can measure 3 different periods of time They are 1 Elapsed time 2 Accumulative elapsed time 3 Lap time Chronograph Display e In Chronograph Mode the display will show the following 1 The mode indicator CHRONOGRAPH appears on the ist and 2nd row of the display 2 The chronograph time ho
53. urs minutes seconds appears on the 3rd row of the display 3 The lap number and chronograph time 1 100 second appears on 4th row of the display e The display shows the Zero display if the product or the chronograph has been reset e The maximum counting range of the chronograph is 99 hours 59 minutes and 59 99 seconds The chronograph can record up to 50 laps Downloaded from www Manualslib com manuals search engine Lap Time the chronograph is counting in the background Lap No CHRONO set GRAPH 0 00 00 00 counting Chronograph Mode Zero Display Elapsed Time reset Note This diagram illustrates the general flow among different functional displays only and may NOT conform to fact in all instances the chronograph is stop counting CHRONO RUNNING 0 00 00 1L 0 Chronograph Mode Lap Time Display 10 seconds reset CHRONO RUNNING 0 00 00 01 Chronograph Mode Counting Display set Chronograph Mode Stop Counting Display 8 1 Chronograph Mode Using the Chronograph Chronograph Function e In Zero Display press the set button once to start the counting When it is counting press the set button again to stop the counting and the elapsed time of which the chronograph is counting will appear e When the elapsed time is displaying repeat the key operations above to get the accumulative elapsed time
54. walking 9 20 47 54 Strong gale Slight structural damage occures 10 26 55 63 Storm Trees uprooted considerable damage 11 30 64 72 Violentstorm Widespread damage 12 299 gt 73 Hurricane Beaufort Scale Downloaded from www Manualslib com manuals search engine Wind Speed Mode hold set jj 5 seconds reset RESET MAX WIND mph mi 1 1 WIND hold lock N mode indicator L 21 3 abort the 18 3 8 3 8 3 reset display if n keep still nashina r Wind Speed Mode Maximum Wind Speed Display Locked Reset Display NO hold mode t confirm set the Note This diagram illustrates the general flow among different functional displays only and may NOT conform to fact in flashing allinstances Maximum Wind Speed Reset Display Yes reset RESET MAX WIND 8 3 11 5 Wind Speed Mode Wind Speed Display Lock Reset Max Wind Speed Wind Speed Display Lock e The ADC is equipped with a function to hold the fluctuating wind speed reading on the display e In Wind Speed Mode press the set button to lock the wind speed reading the display will hold the current reading for 5 seconds Reset the Maximum Wind Speed e TO reset the maximum wind speed press and hold the reset button for 2 second to select the Reset Display e When the Reset Display is displayed press the set button to select between YES and NO e In the YES display press and ho

ManualsLib - Makes it easy to find manuals online!

Contents

Download Pdf Manuals

Related Search

Related Contents