Owners Manual
Contents
1. 11 Diagnostics Chart Overload Chart Additional LED Flashes Contact Information Page 12 Optional Features Contact dealer for more information PAGE 3 450 SERIES WARRANTY OWNER S MANUAL Applicated Security Technologies Inc AST promises to the original purchaser to repair or replace with a comparable reconditioned model any AST control module Module excluding without limitation the any other accessories including but not limited to the antenna remote siren and wiring harness proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle it was originally installed provided the following conditions have been met the module was professionally installed and serviced by an authorized AST dealer the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized AST dealer the warranty information card was sent to AST within 10 days of the original installation date Any warranty returns include a warranty return authorization number issued by AST original bill or sale and be pre paid shipped directly to AST After an initial period of 2 years from the date of installation AST reserves the right at its sole discretion to charge a warranty processing fee of 30 00 USD AST does not cover the cost for return freight on warranty items this cost is the sole responsibility of the purch2. While the system is disarmed and the ignition is in the off position the LEDs will activate from the following triggers 1 If the door is opened the LEDs will stay on until the door is closed 2 If the hood is opened the LEDs will stay on until the hood is closed 3 If the shock sensor detects vibration the LEDs will turn on momentarily 4 If the auxiliary sensor input is activated the LEDs will activate momentary PAGE 11 450 SERIES DIAGNOSTICS OWNER S MANUAL ALARM STATUS DIAGNOSTICS If the alarm system is triggered the system will retain in memory the cause of the trigger When disarming the alarm the siren horn will chirp 3 times to indicate the alarm had been triggered The system s LED will also flash in pulses to indicate which input triggered the alarm LED status will be cleared when the ignition is turned ON For proper memory clearing insure to connect the alarm ignition input to the ignition on the vehicle SIREN CHIRPS LED FLASHES DIAGNOSTICS STATUS 3 2 SHOCK SENSOR TRIGGER 3 3 DOOR HOOD TRIGGER 3 4 IGNITION TRIGGER 0 OFF SYSTEM DISARMED 0 ON SOLID SYSTEM IN VALET SERVICE MODE 0 SINGLE FLASHES SYSTEM ARMED 0 RAPID FLASHES PASSIVE ARM COUNTDOWN ALARM STATUS DIAGNOSTICS If an output from the alarm is shorted the siren will chirp 4 times and the park lights will flash 4 times when the system is armed or disarmed The LED will flash a diagnostic code
3. PRESS amp HOLD button number 4 on the remote transmitter for 3 seconds the release Siren will chirp 5 times and lights will flash This feature helps in locating vehicle in a busy parking lot It allows you hear and see your vehicle from a distance PAGE 9 450 SERIES TRANSMITTER FUNCTIONS OWNER S MANUAL AUX OUTPUT The Aux output can be programmed for a variety of custom applications It is activated by button 3 Please check with your installation center on use and activation for this option IGNITION AUTO LOCKS This optional feature can be programmed to automatically lock the doors when the ignition key is turned to the on position then automatically unlock the doors when the ignition key is turned to the off position PASSIVE ARMING The Passive Arming feature is used to ensure that the vehicle is not left with the alarm disarmed Type 1 When programmed for Passive Arming Type 1 the system will automatically arm and lock optional the doors 30 seconds after the last door is closed Type 2 When programmed for Passive Arming with Rearm Type 2 the system will automatically arm and lock optional the doors 30 seconds after the unlock button is pressed on the remote STARTER DISABLE Starter Disable is a feature that is designed to help prevent the theft of your vehicle When the alarm is armed the system will interrupt the vehicles starter wire thus disabling the vehicle from starting Disarming the alarm
4. will re enable the start circuit and allow the vehicle to start DOME LIGHT SUPERVISION This feature is designed to turn on the interior or exterior lights of your vehicle when the Disarm Unlock button is pressed The light circuit will stay active for up to 30 seconds or until the ignition key is turned to the on position 450 SERIES PAGE 10 OWNER S MANUA SHOCK SENSOR SHOCK SENSOR ADJUSTMENTS 1 ENTER SHOCK SENSOR ADJUSTMENT MODE O Press amp HOLD Lock Unlock buttons at the same time Continue to hold for 3 5 seconds Until Siren Chirps 3 times 3 GHIRPS Note System will Arm or Disarm via silent arming prior to entering adjustment mode 2 ADJUSTING SENSOR Each time the lock button is pressed and released the sensitivity will be INCREASED by 1 level This is confirmed by a series of park light flashes amp Siren Chirps 1 Flash Chirp is the least sensitive setting 10 Flashes Chirps is the most sensitive setting Each time the unlock button is pressed and released the sensitivity will be DECREASED by 1 level This is confirmed by a series of park light flashes amp Siren Chirps 1 Flash Chirp is the least sensitive setting 10 Flashes Chirps is the most sensitive setting 3 EXITING SENSOR ADJUSTMENT MODE Press amp HOLD Lock Unlock buttons at the same time NOTE Shock Sensor Adjustment Mode has an auto time out of 8 seconds ADDITIONAL LED FUNCTIONS
5. Advanced Vehicle Security System OWNER S GUIDE www ultrastarters com ote Some features may not be available on certain models FCC ID NOTICE This device complies with Part 15 of the FCC rules Operation is subject to the following conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation CAUTION Changes or modifications not expressly approved by the part responsible for compliance void the user s authority to operate this devise 450 SERIES PAGE 2 OWNER S MANUA TABLE OF CONTENTS Product 1 3 Remote Functions Quick Pages 4 Second Car Operation Page 4 Valet Mode amp Page 5 Emergency System Override 5 Alarm FUNCtONS 6 9 Arm System Page 6 Trunk Release Page 6 Disarm System Page 7 Priority Unlock Page 7 Panic Page 8 Silent Arm Disarm Page 8 Car Finder Page 8 Auxiliary 1 Ch 4 Page 9 Ignition Auto Locks Page 9 Passive Arming Page 9 Starter Disable Page 9 Dome Light Supervision Page 9 Shock SONS OM essan 10 Shock Sensor Programming Shock Sensor Adjustments DIAQGMOSUICS wi
6. Service Mode in this manual for further information PRESS amp HOLD ACTIVATE TRUNK RELEASE 1 Press then HOLD the Disarm Unlock button on the remote 2 The park lights will flash and the siren will chirp two times 3 The doors will unlock and the Starter Disable will deactivate optional 4 The LEDs will stop flashing 5 Continue to HOLD until siren chirps again and trunk activates 6 Release Button NOTES For safety the trunk release will not active when ignition key is ON PAGE 7 450 SERIES TRANSMITTER FUNCTIONS OWNER S MANUAL PRESS amp DISARM SYSTEM UNLOCK DOORS 1 Press then release the Disarm Unlock button on the remote 2 The park lights will flash and the Siren will chirp Two times 3 The doors will unlock and the Starter Disable will deactivate 4 The LEDs will stop flashing NOTES If the alarm was active siren sounding the first press of the unlock button will turn off the siren and the second press will unlock disarm Siren will chirp 3 times if alarm was triggered while armed See alarm diagnostics section of manual for further information If system is programmed for silent disarm siren will not chirp when disarming park lights will flash 2 times Contact installer if you do not want this feature If system is in valet mode siren will not chirp and park lights will not flash but doors will unlock LED will be one SOLID See Valet Service Mode section of manual fo
7. TH INSTALLATION CENTER FOR DETAILS PRESS FOR 3 ACTIVATES CAR FINDER PRESS TOGETHER THEN RELEASE PRESS TOGETHER THEN RELEASE 2 ACTIVATES SILENT DISARM 1 ACTIVATES SILENT ARM NO SIREN CHIRPS ACTS AS A TOGGLE IF ARMED WILL DISARM IF DISARMED WILL ARM PRESS LOCK THEN RELEASE FOLLOWED ARMS LOCKS AND TURNS OFF SHOCK SENSOR FOR 1 ARM CYCLE ONLY PAGE 5 450 SERIES QUICK VIEW OPERATION CHART VIEW OPERATION CHART OWNER S MANUAL CHIRP BUTTON BUTTON PRESS FLASH SYSTEM FUNCTION 1 SEC LOCK ARM ALARM 3 SEC ACTIVATE PANIC PRESS THEN aD RAR RELEASE THEN a LOCK OPERATION PRESS amp HOLD 1 SEC UNLOCK DISARM 1 SEC OO rome morgage TRIGGERED 2ND CAR UNLOCK DISARM OPERATION 1 SEC ALARM EVENT IN MEMORY see alarm event memory chart PRESS amp HOLD FORT 4 ACTIVATES AUX OUTPUT Al 5 SEC 2ND C OPERATION PROGRAMMABLE OUTPUT CHECK WITH INSTALLATION CENTER FOR DETAILS VALET MODE EMERGENCY OVERRIDE This feature will disable or re enable the alarm without the use of the remote transmitter This feature will work when alarm in either an armed disarmed or triggered state When the system s override had been activated door lock and trunk features will still be operational however the alarm will be active Press and hold the valet switch for 8 to 15 seconds Time depends on Valet Settings Progra
8. aser All components included with the original packaged unit other than the module including but not limited to the siren antenna and the remote transmitters carry a one year warranty from the date of purchase of the same Any warranty returns on components must include a warranty return authorization number issued by AST original bill or sale and be pre paid shipped directly to AST This warranty is non transferable and is automatically void if the original purchaser has not completed the warranty card and mailed it within ten 10 days of the date of purchase to the address listed on the card the unit s date code or serial number is defaced missing or altered the unit has been modified or used in a manner contrary to its intended purpose the unit has been damaged by accident unreasonable use neglect improper service installation or other causes not arising out of defects in materials or construction The warranty does not cover damage to the unit caused by installation or removal of the unit AST at its sole discretion will determine what constitutes excessive damage and may refuse the return of any unit with excessive damage including but not limited to overloading moisture and physical damage To the maximum extent allowed by law any and all warranties are excluded by the manufacturer and each entity participating in the stream of commerce therewith This exclusion includes but is not limited to the exclusion of any and all warrant
9. m Option Turn the Ignition Key ON Leaving the key ON a a Siren will chip 5 times to confirm Valet Mode Emergency Override ___5 CHIRPS ON has been activate or 2 times for deactivate If alarm was in a triggered _ 2 CHIRPS OFF state the siren will shut off and park lights will stop flashing The LED status light will be OFF to confirm Valet Mode is NOT ACTIVE and system The LED status light will come on STEADY to confirm Valet Mode is ACTIVE is in normal alarm operation mode 450 SERIES PAGE 6 OWNER S MANUA TRANSMITTER FUNCTIONS PRESS amp RELEASE K ARM SYSTEM LOCK DOORS 1 Press and release the Arm Lock button on the remote transmitter 2 The park lights will flash and the siren horn will chirp one time 3 The doors will lock and the Starter Disable will activate optional 4 The LED will start flashing within five seconds 5 Once Armed the alarm can be triggered by the shock sensor impact to vehicle door inputs opening door hood turning on ignition NOTES If a door is open or delay dome light is 30 seconds after arming system with chirp times to indicate door input is bypassed until door is closed or dome light turns off If system is programmed for silent arming siren will not chirp when arming but park lights will still flash If system is in valet mode doors will lock but siren will not chirp and lights will not flash LED indicator will be on solid See Valet
10. r further information Optional Feature may require additional parts PRESS TWICE DRIVER S DOOR PRIORITY UNLOCK 1 Press then release the Disarm Unlock button on the remote transmitter 2 The park lights will flash and the siren will chirp two times 3 The driver s doors will unlock and the Starter Disable will deactivate optional 4 The LEDs will stop flashing 5 Press the Disarm Unlock Button a second time within 3 seconds and the other doors will unlock 450 SERIES PAGE 8 OWNER S MANUA TRANSMITTER FUNCTIONS PRESS HOLD ACTIVATE PANIC MODE 1 Press and HOLD the Arm Lock button for three seconds 2 The doors will lock and the Starter Disable will activate optional 3 The park lights will begin to flash and the siren will activate 4 To turn off panic press Lock or Unlock buttons on remote 5 If no button is pressed Panic Alarm will sound up to 1 minute then turn off Panic Mode is a personal protection feature that allows you to activate your alarm from the remote transmitter This feature can be used to draw attention to your vehicle if you feel threatened PRESS TOGETHER JEN SILENT ARM SILENT DISARM 1 Press then release the Lock amp Unlock buttons together 2 If the system is DISARMED it will Arm and Lock with no siren chirps and 1 light flash 3 If the system is ARMED it will Disarm and Unlock with no siren chirps and 2 light flash PRESS amp HOLD for 3 sec CAR FINDER MODE
11. that represents the circuit that is at fault See Chart Below Turning the ignition to the on then off position will reset the diagnostic code LED FLASHES OUTPUT DIAGNOSTICS 2 LOCK OUTPUT OVERLOAD UNLOCK OUTPUT OVERLOAD TRUNK OUTPUT OVERLOAD STARTER DISABLE OVERLOAD NOT USED AUX 5 OUTPUT OVERLOAD 2ND UNLOCK OUTPUT OVERLOAD 450 SERIES 12 OWNER S MANUAL Po technical support support ultrastarters com additional product information www ultrastarters com IMPORTANT NOTES LOCK UNLOCK DRIVER S DOOR PRIORITY UNLOCK TRUNK RELEASE AND THE AUXILIARY OUTPUTS ARE OPTIONAL OUTPUTS ENABLING THESE FEATURES REQUIRES CUSTOM INSTALLATION amp PROGRAMMING THESE FEATURES MAY NOT BE COMPATIBLE WITH SOME VEHICLES FOR SAFETY REASONS THE TRUNK RELEASE OUTPUT WILL NOT ACTIVATE WHEN THE IGNITION IS IN THE ON POSITION NOTE PADLOC AND 2ND CAR OPERATION ARE FEATURES THAT REQUIRE SPECIAL PROGRAMMING SOME FEATURES MAY NOT BE AVAILABLE FOR ALL APPLICATIONS CONTACT YOUR DEALER FOR MORE INFORMATION
12. y of merchantability and or any and all warranty of fitness for a particular purpose and or any and all warranty of non infringement or patents in the United States of America and or abroad Neither the manufacturer or any entities connected therewith shall be responsible or liable for any damages whatsoever including but not limited to any consequential damages incidental damages damages for loss of time loss of earnings commercial loss loss of economic opportunity and the like Notwithstanding the above manufacturer does offer a limited warranty to replace or repair the control module as describe above Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages This warranty gives you specific legal rights and you may also have other rights which vary State to State 450 SERIES PAGE 4 OWNER S MANUA QUICK VIEW OPERATION CHART CHIRP FLASH 1 SEC LOCK ARM ALARM BUTTON BUTTON PRESS SYSTEM FUNCTION 3 SEC ACTIVATE PANIC PRESS THEN RELEASE THEN PRESS amp HOLD ACTIVATE CONSTANT LOCK OUTPUT 1 SEC UNLOCK DISARM 1 SEC WHILE ALARM IS TURNS OFF SIREN BUT ALARM IS TRIGGERED STILL ARMED UNLOCK DISARM 1 SEC ALARM EVENT IN MEMORY see alarm event memory chart PRESS FOR1 4 ACTIVATES AUX OUTPUT PROGRAMMABLE OUTPUT CHECK WI
Download Pdf Manuals
Related Search