Home

RS800 G3 Equine

image

Contents

1. years to come Dry and store the strap and the transmitter connector separately Wash the strap in a washing machine before long term storage and always after use in pool water with high chlorine content Keep your training computer and trans mitter in a cool and dry place Do not keep them in a damp environment in non breathable materi al a plastic bag or a sports bag nor with conduc tive material a wet towel Do not expose to di rect sunlight for extended periods Detach the transmitter connector from the strap and rinse the strap under running water after every use Dry the connector with a soft towel Never use alcohol or any abrasive material steel wool or cleaning chemicals Wash the strap regularly in a washing machine at 40 C 104 F or at least after every fifth use This ensures reliable measurement and maximizes the life span of the transmitter Use a washing pouch Do not soak spin dry iron dry clean or bleach the strap Do not use detergent with bleach or fabric softener Never put the transmitter connector in the washing machine or drier Operating temperatures are 10 C to 50 C 14 F to 122 F Electrode attached to girth 9 Starting training You are now ready to start Starting from the time display press OK twice To stop the exercise press STOP twice The RS300X returns to time display For more detailed information on how the Equine RS300X G1 works please check the user manu
2. 2 How to use the RS300X receiver The RS300X receiver has 5 navigation buttons e Use UP and DOWN to scroll through the different menus and adjust values a bit like and buttons 1 Contents of the set A A RS300X receiver receives and dis plays all the data measured by the T54H transmitter and the G1 sensor B A G1 GPS sensor with its battery Polar Equine measures speed and distance in real time l LIGHT UP B e Use OK to enter a menu to validate a llumi N Fa C A T54H transmitter measures the value and to start the stopwatch luminate f San seas horse s heart rate in real time display values up e Use STOP to exit a menu to return to 4 7 the previous display when you made a ya j he mistake while adjusting a value and to 7 Getti ng started Q U ide E stop the stopwatch STOP DOWN p p l Returns to the Scroll selections e Press LIGHT once and the backlight is previous display values down activated for 5 seconds when you press any other button You can also lock the OK buttons by pressing and holding the Accept selections LIGHT button for 2 seconds A C 3 Starting the RS300CX By default the RS300X receiver is Press UP or DOWN to select english The following settings must be done Use the UP and DOWN buttons to cus If your settings are good select Yes Once the settings are done the RS300X switched off to save the battery as the language to be used even though they don t concern the tomize th
3. al included in the box Each display shows 3 rows of data and is named You can also zoom on a data to make it larger on after the bottom row the display For more tips training advices and more informa tion on Polar products visit www polar fi Enjoy your ride gt 4h POLA LISTEN TO YOUR BODY 2X En The stopwatch starts a heart symbol blinks and the horse s heart rate is displayed in the bottom of the screen To check the data you are most interested in change display by pressing UP or DOWN 5 dif ferent displays are available Heart Rate Dis tance Speed Lap Time Stopwatch Press and hold UP for 2 seconds to zoom in the data of the top row or DOWN for 2 seconds to zoom in the data of the bottom row Press and hold the same button for 2 seconds to zoom out All the data has been recorded and can be re trieved in the file To access the file press UP once from time display and then validate by pressing OK
4. e following basic settings returns automatically to the time display horse Press OK to validate your settings e _ Time display 24h 12h e Time e Date day month year or month day year e Units kg cm km or Ib ft mi D e Weight of the rider e Height of the rider e Birthday day month year or month day year of the rider e Sex of the rider Press OK twice to activate it Press OK to validate If you don t do these basic settings If you made a mistake somewhere Press OK to validate It is now ready for use the RS300X will remind you again be press STOP to return to the previous fore every exercise setting 4 Starting the G1 GPS Sensor The G1 sensor uses GPS Global Positioning System technology to measure speed The buckle located in the back of the G1 Open the G1 buckle and pass the strap To ensure good detection of the GPS sig Press the button 2 seconds to start or stop and distance in real time In ideal conditions of use its precision can reach one meter allows you either to wear the G1 on your through the loop Velcro on the inside nals the G1 shouldn t be covered and the G1 A green light indicating battery status arm using the strap provided or to fix it l should be placed with the Polar logo in an B flashes for a few seconds Following this be tn of a die an o a of a The G1 is waterproof and its solid on a belt or loop Pull in enough strap so your arm can fit upright position We also
5. recommend wear a red light indicating detection status A ap a n a a A alge Seana et through it ing it on the same arm as the RS300X re pears and shows that the G1 is searching for ceiver GPS signals Don t move Once the GPS signals have been found after 1 minute in average this light A turns green Use a coin to unscrew and open the metal battery cover Place the LR6 battery as indi S cated and screw the metal cover back into place To ensure a good detection of the GPS Then adjust the size of the strap so the G1 Your G1 is now ready for use Note The light indicating battery status B signals the G1 should not be covered or can t move once placed on your arm turns red when the battery is flat worn under clothes 5 Activate the G1 GPS inthe RS300X 6 Set the RS3800X to display 7 How to attach the I 54H speed or pace transmitter on the horse The RS300X receiver can display either speed or pace First of all identify the 2 electrode pads on each UP DOWN gt Settings gt Features gt Speed view gt side of the transmitter The electrode with velcro on choose option the back is the positive electrode and logically the other electrode is the negative electrode In the s middle you ll find the WearLink transmitter pocket Attach the WearLink transmitter into the transmiter pocket and close it This pocket protects your transmit ter from shocks and scratches and prevents it from fal ling off the transmitter Place
6. the positive electrode under the saddlepad on the left or right side of the withers Ensure that the electrode is flat against the horse s skin The rider s weight will keep the electrode in place The GPS sensor has to be activated from the training computer before it can be used UP DOWN gt Settings gt Features gt S sensor gt GPS The transmitter picks up very small electrical impulses emitted by the heart and for the transmitter to read the heart rate properly we need to insure a good contact to the horse s skin Make sure you wet the electrodes properly the integrated sponge will keep up some moisture but you still need to wet to horse s coat especially as your horse is not yet sweating If your horse has a thick winter coat you can shave the spot where you will place the electrodes this will greatly improve the heart rate signal quality Fasten the transmitter to the saddle with one of the rubber straps Electrode under the saddle pad on the off side 8 Caring of your product Attach the negative electrode to the girth using a rub ber strap and tighten the girth If you are riding with a loose girth you can place a sponge behind the nega tive electrode to insure contact with the skin Transmitter attached to the saddle Like any electronic device the Polar training computer k should be treated with care The suggestions below will help you fulfill guarantee obligations and enjoy this product for many

Download Pdf Manuals

image

Related Search

Related Contents

Bedienungsanleitung  Indesit IWDE7145B washing machine    InviMag Universal Kit/ IG User manual - Negev Bio  DESCRIPCION: USOS: MODO DE EMPLEO:  卓上型溶存酸素計 DO2700 日本語取扱説明書  Sortir n° 4  12 8 kn - Sperry Marine  Manual de puesta en marcha de calefactores semiconductores.  classique pedadiff  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.