DANTE 64-B-36
Contents
1. around You endanger your own and safety of others This device must never be operated or stockpiled in surrounding where splash water rain moisture or fog may harm the device Moisture or very high humidity can reduce the insulation and lead to mortal electrical shock When using smoke machine make sure that the device is never expose to the direct smoke jet and is installed in a distance of 0 5 meter between smoke machine and device The room must only be saturated with an amount of smoke that the visibility will always be more than 10 meter The ambient temperature must always be between 5 C and 45 C Keep away from direct insulation particularly in cars and heater The relative humidity must not exceed 50 with an ambient temperature of 45 C This device must only be operated in an altitude between 20 and 2000 m over NN Never use the device during thunderstorm Over voltage could destroy the device Always disconnect the device during thunderstorms The symbol distance between light output and the illuminated surface must be more than 0 1 meters terminestheminimum distance from lighted object The minimum This device is only allowed for an installation via mounting bracket In order to safe guard sufficient ventilation leave 50 cm of free space around the device The housing must not touch surrounding surface or object Make sure that the are bellow the installation place is block when rigging de rigging or servicing t2. USER MANUAL DANTE 64 B 36 CAUTION Keep this device away from rain and moisture Unplug main lead before opening the housing For your own safety please read this user manual carefully before you initially start up Every person involved with the installation operation and maintenance of this device has to e be qualified e Follow the instruction of this manual e Consider this manual to be part of the total product e Keep this manual for the entire service life of the product e Pass this manual on to every further owner or user of the product e Download the latest version of the user manual from the internet INSTRUCTION Thank you for having chosen Par 64LED If you follow the instruction given in this manual we are sure that you will enjoy this device for long period of time Unpack your Par64 LED Before you initially start up please make sure that there is no damage cause by transportation Should there is any consult your dealer and do not use the device SAFETY INSTRUCTION Be careful with your operation With a dangerous voltage you can suffer a dangerous electric shock when touching the wires This device has left our premises in absolutely perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instruction and warning notes written in this manual Important Damages cause by the disregard of this user manuals are not s
3. anne Channe 4 Channe 5 Channe6 4 00 Green color button Up Down Brightness 4 00 off 4 01 min 4 99 max mode speed 3 red green blue black out 5 00 Blue color button Up Down Brightness 5 00 off 5 01 min 5 99 max a ea 6 00 Black out 5 0 255 R G B total _Blue Black out 7 00 R G color button Up Down Brightness 7 00 off 7 01 min 7 99 max Function brightnes brightness brightness s control 5555 8 00 R B color button Up Down Brightness 8 00 off 8 01 min 8 99 max Blue 9 00 B G color button Up Down Brightness 9 00 off 9 01 min 9 99 max brightness Black out brightness g a R G B b black out c Flash button Up Down speed c 00 fast c 99 slow d 7 color change button Up Down speed d 00 fast d 99 slow ES ARE worn ae e wor GARE sono nae e 7 color Flash button Up Down speed e 00 fast e 99 slow f 7 color fade button Up Down speed f 00 fast f 99 slow 0001 DMX addressing button Up Down channel 0001 to 0510 1001 MODE B FUNCTION ADDRESS 1001 TO 1510 2001 MODE C FUNCTION ADDRESS 2001 TO 2510 1 DMX mode or Master slave Master Slave The LED items with master slave function can work synchronously with out controller used when you connect them with DMX cables and put them in 1 CLEANING AND MAINTENACE DANGER TO LIFE Disconnect from mains before starting maintenance operation We recommend a frequent cleaning of the device Please use soft lint free moistened cloth Never use alcohol or solvent There ar
4. e no serviceable parts inside the device Maintenance and service operation are only to becarried out by authorize dealer Should you need any spare parts please use genuine parts Should you have further question please contact your dealer TECHNICAL SPECIFICATIONS Power supply 90 240V 50 60Hz 108W Dimension txWx D fo Please Note Every information is subject to change without prior notice
5. ecialist if liquid has reduce any insulation Reduce insulation san cause mortal electrical shock There must never be any object entering into the device This is especially metal parts If any metal parts like staple or coarse metal chips enter into the device must be taken out of operation and disconnected immediately Malfunction or short circuit cause by metal parts may cause mortal injuries During initial start up some smoke or smell may arise This is normal process and does necessarily means that the device is defective HEALTH HAZARD Never look directly into the light source as sensitive person may suffer an epileptic shock especially meant for epileptics Keep away Children and armature Never leave this device running un attended OPERATING DETERMINATIONS This device is a lighting effect for creating decorative effects This product is only allowed to be operated with an alternating voltage of 90V 240V 50 60Hz and was designed for indoor use only This device is designed for professional use e g on stage in discotheques theatres etc Lighting effects are not designed for permanent operation Consistent operation breaks will ensure that the device will serve you for long time without defects Do not shake the device Avoid brute force when installing or operating the device When choosing the installation spot please make sure that the device is not expose to extreme heat moisture or dust There should not be any cable lying
6. f ten times the projector s O Mount the projector with the mounting bracket to your trussing system using an appropriate DANGER OF FIRE When installing the device make sure there is no highly inflammable material decoration articles etc within a distance of min 0 5m clamps For over head use always install a safety rope that can hold at least 12 times the weight of the fixture You must only use safety ropes with quick links with screw cap Pull the safety rope through the hole in the mounting bracket and over the trussing system ar safe fixation spot Insert the end in the quick link and lighten the safety screw The maximum drop distance must never exceed 20 cm A safety rope which already hold the strain of a crash or is defective must not be used again Adjust the desired inclination angle via mounting bracket and tighten the fixation screws Connect the fixture to the main with the power plug The occupation of the connection cable is as follows _ A DMX 512 connection connection between fixture DANGER TO LIFE Before taking into operation for the first time the installation has to be approved by an expert The wires must not come into contact with each other otherwise the Only use a stereo shielded cable and 3 pin XLR plugs and connector in order to connect the controller with the fixture or one fixture with another Only use a stereo shielded cable and 3 pin XLR plugs and connecto
7. he fixture Always fix the fixture with safety rope The maximum ambient temperature 45 C must never exceed Operate the device only after having familiarized with its functions Do not permit operation by persons not qualified for operating the device Most damage are the result of unprofessional operation Do not use solvent or aggressive detergents in order to clean the device Rather use soft and damp cloth Please use original packaging if the device is to be transported Please consider that unauthorized modification on the device are forbidden due to safety reasons If this device will operated in any way different to the describe in this manual the product may suffer damage and the guarantee becomes void Further more any other operation may lead to danger like short circuit burns electric shock lamp explosion crash etc The installation of the projector has to be build and constructed in a way that can hold 10 times the weight for 1 hour without any harming deformation The installation must always be secure with a secondary safety attachment e g appropriate catch net This secondary safety attachment must be constructed in a way that no part of installation can fall down if the main attachment fails When rigging dragging or servicing the fixture staying in the area below the installation place on bridges under high working places and other endangered areas is forbidden The operator has to make sure that safety relating a
8. nd machine technical installation are approve by an expert before taking into operation for the first time and after changes before taking into operation another time The operator has to make sure that safety relating and machine technical installation are approve by an expert after every four years in the course of an acceptance The operator has to make sure that safety relating and machine technical installation are approve by a skilled person once a year Procedure The projector should be installed outside areas where persons may walk by or be seated IMPORTANT OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE including but not limited to calculating working load limit installation material being use and periodic safety inspection of all installation material and the projector If you lack these qualification do not attempt the installation yourself but instead use a professional structural rigger Improper installation can result in bodily injury and or damage to property The projector has to be installed out of reach of people If the projector shall be lowered from the ceiling or high joints Professional trussing system have to be used the projector must never be fixed swinging freely in the room Caution Projector may cause sever injuries when crashing down If you have doubts concerning the safety of a possible installation do NOT install the projector Before rigging make sure that the installation area can hold a minimum point load o
9. part in the device must never be strained There must be sufficient cable to the device otherwise the cable may be damages which may lead to mortal damage Make sure that the power cord is never crimped or damage by sharp edges Check the device and the power cord from time to time If extension cord are use make sure that the core diameter is sufficient for the required power consumption of the device All warning concerning the power cords are also valid for possible extension cords Always disconnect from the mains when the device is not in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord Otherwise the cable or plug can be damaged leading to mortal electrical shock If power plug or power switch is not accessible the device must be disconnected via mains If the power plug or the device is dusty the device must be taken out of operation disconnect nd then be cleaned with a dry cloth Dust can reduce the insulation witch may lead to mortal electrical shock More severe dirt in and at the device should be removed by a specialist There must never enter any liquid into outlets extension cords or any holes in the housing of the device If you suppose that also a minimal amount of liquid may enter the device it must immediately be disconnected This is also valid if the device was expose to high humidity Also if the device is still running the device must be checked by a sp
10. r in order to connect the controller with the fixture or one fixture with another Occupation of the XLR connector DMX input DMX output XLR mounting socket XLR mounting socket MODE B 1001 Signal 2 Signal red green blue black out REORDERING mode k brightness brightness brightness TotalBrightness Ifyou are using controllers with this occupation You can connect the DMX output of the controller boa tivity eae directly with the DM A input of the first fixture m the DMX chain If you wish to connect DMA 0 Low 255 high gradient controller with other XLR outputs you need to use adapter cable Building a serial DMX chain green brightness Connect the DMX output of the first fixture m the DMX cham with the DMX input of the next aor coe oe a ea 011 255 fixture Always connect one output with the input of the next fixture until all fixture are connected green Flash speed flash Caution At the last fixture the DMX cable has to be terminated with the terminator Solder a 2000 resistor between Signal Signal mto a 3 pm XLR plug and plug it m the DMX output MODE C 2001 of the last fixture Channe1 Channe 2 Channe3 Channe4 red green blue Black _ aaa 0 255 0 255 0 255 Black DOWN Manually Mode MODE UP 2 00 Sound control button Up Down Volume sensitivity 2 99 min 2 00 max MODE A 0001 3 00 Red color button Up Down Brightness 3 00 off 3 01 min 3 99 max Channe 1 Channe2 Ch
11. ubject to warranty The dealer will not accept liability for any resulting defect or problem If the device has expose has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switch off until it reach room temperature Please make sure that there are no obvious transport damage Should you notice any damage on the A C connection cable or on the casing Do not take the device into operation and immediately consult your local dealer This device falls under protection class 1 The power plug must only be plugged into a protection class 1 outlet The voltage and frequency must exactly be the same as stated on the device Wrong voltage or power outlets can lead to the destruction of the device and to mortal electric shock Always plug in power plug last The power plug must always be inserted without force Make sure that the plug is tightly connected with the outlet Never let the power cord come into contact with other cables Handle the power cord and all connection with the mains with particular caution Never touch them with wet hands as this could lead to mortal electric shock Never modify bend strain mechanically put pressure on pull or heat up the power cord Never operate next to source of heat or cold Disregard can lead to power cord damages fire or mortal electric shock The cable insert or female
Download Pdf Manuals
Related Search