Home
Tivit User`s Manual
Contents
1. channels Red Tivit is not operating in a normal manner Press the Reset On Hole on the side with a pin to reboot m Wi Fi LED Indicator at the Bottom Status Details off Wi Fi is not in normal operation Or Tivit is connected with PC through an USB cable Green Tivit is ready to transmit data to a smart phone over Wi Fi On connection ei Tivit is transmitting data to a smart phone over Wi Fi Before Using the Product This product carries built in removable lithium ion battery When using it first right after opening the case please recharge the battery completely You can recharge the battery by connecting the USB mini B port of the product to USB power adaptor or USB ports in PC with the USB cable included tivit When recharging with When recharging with AC power adaptor USB ports in PC During the recharge the power amp battery LED Indicator turns Red and Green upon its completion It takes around 180 minutes on the basis of a new battery to recharge the battery to its full capacity based on DC 5V 500mA time and consumption may vary depending on the charge status and 3 amp 1 The recharging time is just a anticipation and battery recharging using environment Turning on the power while the battery is being recharged shall make the recharging time longer When recharging the Tivit by connecting it to USB ports you can t play the DVB H broadcast on the smart phone because the
2. batteries in the smart phone and Tivit Three hours of continuous watching may be available if the batteries are charged to the full capacity Watch DVB H Broadcast in PC You can watch DVB H channels in your PC by installing a dedicated receiver application Tivit Mobile TV Viewer in PC m Installing the Tivit Mobile TV Viewer Application Press the power button of Tivit on The booting takes about 20 sec Please check if the status LED Indicator is on to green Connect the Tivit and PC with a USB cable By using the CD included in the product package install the driver and Tivit Mobile TV Viewer application in your PC If the installation completes there appears an icon like the following on the window background TV O 8 m Activating the Tivit Mobile TV Viewer Application and Watching TV Press the Power Button of Tivit on Connect the Tivit and PC with an USB cable By activating the application and selecting the channel you can watch the program Whenever pressing the gt buttons it allows to change channel back or forth Pressing the Af button will show a dialogue box containing the info EPG of the channel and program Pressing the button shows a dialogue box for changing the settings of Tivit be activated Pull out the USB cable connected between Tivit and PC and reconnect it If the problem continues later on factory reset the Tivit to the initial fact
3. channel names of each show and CAS icons Appearance of CAS icons varies depending on whether the user has subscribed to or purchased the service or not The channels without any CAS icons or with a icon are available to watch Tapping button in the channel list will display detail program schedule of that channel Use the volume control button on the left side of iPhone to control the sound volume while watching Q You can change the channel while watching a program First touch the screen of iPhone and using W A buttons on the center of the display to change channels Touching the display while watching will make Done screen button appear on the upper section of the display Touching this button will bring you to the channel list display When the client application is terminated the Wi Fi configuration of Phone is still set as being connected with the Tivit so sometimes connecting the Internet from iPhone may not work broadcasting operator If you want to receive a DVB H channel provided by other operator you should tap the Rescan Channels button in the channel list to search the channel again This process may take approx 3 min since all frequencies and broadcast channels are retrieved again Aa The list of broadcasting channels may vary for each different Watch DVB H Broadcast in Nokia E90 m Installing the Tivit Mobile TV Viewer Application In this process th
4. channel list is displayed Select a desired channel from the list and Nokia E90 displays the broadcasting picture It may take some time before the picture is displayed The channel list includes the icons and names for each channel names of each show and CAS icons Appearance of CAS icons varies depending on whether the user has subscribed to or purchased the service or not The channels without any CAS icons or with a icon are available o watch Selecting a channel icon or name in the channel list will show the broadcasting picture for that channel Q You can use the Options menu while using the application to view he functions available at the moment Selecting the Open Channel in Options menu will bring you to the broadcasting display while selecting TV Guide display detail program schedule of that channel Use the Up Down scroll keys to change the channel while watching he channel and Left Right scroll keys to control the sound volume The list of broadcasting channels may vary for each different broadcasting operator If you want to receive a DVB H channel provided by other operator you should select Options Rescan channels in the channel list to search the channel again This process may take approx 3 min since all frequencies and broadcast channels are retrieved again How long DVB H channels can be received continuously depends on the remaining volume of
5. provide a good signal receiving 13 Default Spec of Tivit Product Name tivit Broadcasting Standards DVB H DVB H Receiving Bandwidth UHF 474 858MHz Module Rod t 3 od type antenna Antenna Full length 11 5cm Radio Standards IEEE 802 11b g Wi Fi Module Antenna Built in USB mini B type port 1 set USB Port for recharging Tivit and connecting to PC Battery Removable lithium ion battery 3 7V 1050mAh Input Voltage DC 5V supplied through a USB cable Power Consumption While in use Under 1W When the power is OFF Under 10mW Charging Current Recharging Time DC5V 500mA Approx 180min Functional Temp 0 35 Dimension 52x92x12mm WxHxD protruded parts excluded when the antenna is not pulled out Weight Approx 70g ancillary parts not included 14
6. B ports of your PC you should set the configuration in Settings USB Mode to Off of the client application in iPhone When iPhone try to set up a connection with the Tivit it will display all available SSIDs of the surrounding Wi Fi networks Check the SSID of your Tivit marked on the rear side label to select correct SSID of your Tivit and press the Done button Once you set up a connection first time just click the client application later then it automatically aan connect to the Tivit tivit previously connected INSV TIA OUT SV lt O5A and you don t need to CE 0678 v acro set up a SSID connection again Peete g Tmo e eenoae sin Tvn10005075 Other 2a wu TP Made in Korea If the iPhone and Tivit are not connected A there appears a warning display as shown on the right In this case you should check whether the Tivit is power on or Wi Fi setting of iPhone Thereafter check the settings of ra Ba Tivit according to instructions appearing on the display aanne m Watch DVB H Broadcast Activate Click Tivit Mobile TV Viewer application in iPhone A moment later a list of currently available DVB H channel lists are displayed Select a desired channel from the list and iPhone displays the broadcasting picture It may take some time before the picture is displayed The channel list includes the icons and names for each
7. Tivit User s Manual Thank you for purchasing Tivit The Tivit User s Manual provides information on how to use the product as well as precautions for use Please do not use the device until you have thoroughly read the manual Keep this manual in a place where you can find it easily Wi Fi is a registered certification mark of Wi Fi Alliance Apple the Apple logo and iTunes are trademarks of Apple Inc registered in the U S and other countries iPhone is a trademark of Apple Inc Use of the iPhone trademark is governed by the license policy of Apple Inc Nokia the Nokia logo and PC Suite are trademarks of Nokia Inc registered in the Finland and other countries Nokia is a trademark of Nokia Inc Use of the Nokia trademark is governed by the license policy of Nokia Inc The iPhone and Nokia may be configured to be used only through a specific communications service provider Tivit s name and logo are trademarks of Valups Inc Various marks such as and are used in this manual Specification design and composition shown in the manual may change in part or whole without prior notice in order to improve the product s functionalities and as such there may be difference between the contents of the manual and the actual product This User s Manual belongs to Valups Inc Copying reproducing or changing this manual in part or in whole is prohibited without the prior permission of V
8. Wi Fi connection will be disabled automatically However you can watch DVB H broadcast when recharging it with the USB power adaptor To recharge through the USB ports in PC and watch TV at the smart phone please change the setting of Tivit as illustrated on page 11 Watch DVB H Broadcast with iPhone iPod Touch m Installing the Tivit Mobile TV Viewer Application After accessing to AppStore at iPhone search the application with a keyword Tivit Mobile TV Viewer for DVB H and download it Upon the completion of the application download an icon N appears on the iPhone iPod Touch as the following TV m Activating the Tivit Mobile TV Viewer Application Press the power button of Tivit on The booting takes about 20 sec Please check if the status LED Indicator is on to solid green m Select the Settings menu in iPhone to enter Wi Fi menu and check if Wi Fi setting is ON ma e ececce Clink the Mobile TV viewer application in the home of iPhone After a moment the currently available DVB H channel lists will be displayed A When recharging the Tivit by connecting it to USB ports of PC you can t 1 In the Initial running of Tivit after the purchase it may take approx 3 min for searching the frequencies and broadcast channels watch the TV program in iPhone since the Wi Fi function will be disabled automatically If you still want to watch TV in iPhone while recharging it via US
9. alups Inc X The meaning of the marks used in this manual are as follows If a user does not follow this direction it may cause damage Note to the product Reference This should be referred to when a user uses the product Features Tivit as an accessory device to smart phones and PCs supports following functions Watch DVB H Broadcast on Smart Phones It plays the role of a tuner that can receive the DVB H broadcasting channels By installing smart phone dedicated application software Tivit Mobile TV Viewer you can watch DVB H channels with a smart phone Watch DVB H Broadcast on PC You can also watch DVB H Broadcast on PC by installing a dedicated PC application software Tivit Mobile TV Viewer on your PC Providing EPG Info It provides DVB H channel list that is currently available and also provides detail information of TV programs Upgrading Firmware If you install an application Tivit Updater that can be used for upgrading firmware you can upgrade the newest firmware of Tivit by yourself Please visit http www valups com eng tivit dvbh htm to view the list of M smart phones usable with this product Package Contents The whole product package consists of the following items Please check whether any item is missing after opening the package A tivit Tivit s body USB cable User s manual ACD for Applications Battery for PC and driver included installation Wh
10. e Tivit Mobile TV Viewer for Nokia is set up into your PC through the CD included in the product pack Later on you can download the latest version of Tivit Mobile TV Viewer application over the Customer Support Website Install the Nokia E90 application using the Nokia PC Suite Please refer to the Nokia E90 guide for how to use Nokia PC Suite Upon the completion of the application download an icon eN appears on the Nokia E90 as the following Tv m Activating the Tivit Mobile TV Viewer Application Press the power button of Tivit on The booting takes about 20 sec Please check if the status LED Indicator is on to solid green xI When first accessing the Nokia E90 and Tivit select Menu Connectivity WLAN wizard in Nokia E90 2 After selecting the SSID for Tivit in the WLAN list select Options Define access point The SSID for Tivit is included in the label on the rear side of the body tivit MODEL NO VTV H10 IN SV gt 1A OUT 5V 0 5A CE 0678 ULIG UL jin STH 000507 SSID TVH 000507 eaaenh Activate the application in Nokia E90 Select the SSID for Tivit registered in 3 from the Access Point List On a dialogue box asking whether to connect the WLAN in the offline mode select the Yes Q 6 8 After a moment following the instructions in the display you can view the list of available DVB H channels min for searching the frequencies and b
11. en using the product for the first time when you purchase the A product please recharge battery completely Also when the product has been left unused for a long time you should recharge the battery first Terms and Functions of Each Parts Antenna An antenna for receiving DVB H broadcasting signal Please pull out the antenna to its maximum length if the signal is weak M Power amp Battery LED Indicator It indicates remaining battery power status when the device is in use and indicates whether the battery is recharging correctly or not uaillStatus LED Indicator It shows whether Tivit successfully catch available DVB H channel information and the receiving sensitivity for DVB H signal Wi Fi LED Indicator Indicates the connection status with Smart phone through Wi Fi and also show data transmission status between two devices Reset Hole You can press into this hole with a pin to reset the product if there is any problem Press the power button and immediately press the reset hole with a pin while holding the power button then Tivit will turn off and turn on again After booting up finally Tivit will be initialized to its original state when you purchased Please do not operate this function when the power amp battery indicator LED is blinking Power Button Turns Tivit on off Press to power on and hold for 3 seconds to power off USB mini B Port You can use this port when recharging t
12. f Wi Fi may not work To recharge through the USB ports in PC and watch TV at the smart phone please set Settings USB Mode to Off Resetting the Tivit Pressing the Reset Switch with a pin resets the system The settings are saved When connecting the Tivit with other smart phone Tivit matches a smart phone on 1 1 basis You will get an error message if you try to activated an application at a smart phone other than those previously connected to the Tivit If you want to connect the Tivit to other smart phone please initialize the Tivit to factory settings as described in and try it again Initializing the Tivit to factory settings If the same problem continues even after checking the power and SSID please initialize the Tivit to factory settings If you press the power button and immediately press the reset hole with a pin while holding the power button the power turns off and on and the Tivit returns to its initial settings at the time of purchase The initializing process turns all settings including SSID back to their initial states Note that you should perform this only when the Power amp Battery LED indicator is on in green not flickering Q2 When watching a channel often find the picture broken and the sound not so good Make sure that the DVB H receiving antenna is pulled out in its full length when watching a DVB H channel to get enough TV signals Please try to move to a location that can
13. he battery by connecting this port into USB power adaptor or USB ports in PC with USB cables This port also can be used to connect PC to watch DVB H Broadcast on your PC client application The video playback may not be smooth depending on the performance of smart phones or Wi Fi communication environment Guides for the LED Indicators You can check the DVB H signal reception status and operation status with LED Indicators of which colors change in each situation as follows m Power amp Battery LED Indicator at the Top Place Status Details Off Tivit s power is off Red Green When Tivit is recharged from USB power adaptor or USB ports in PC the LED turns into solid red and finally turns On P k into solid green if the recharge completes Red Orange Once Tivit is on the LED indicator is blinking in 3 Green seconds to show remaining battery power status Red On blinking is 30 or less orange blinking is between 30 70 and Green blinking is 70 or above m Status LED Indicator at the Center Status Details Off Tivit s power is off Green It indicates the Tivit is turning booting up on It takes Fast Blinking about 20 sec to complete boot up procedure Green Now searching for available DVB H broadcasting Slow Blinking frequency Green Channel searching was succeeded and ready to watch Solid On DVB H broadcast Orange Failed to search for DVB H Broadcasting frequency or On
14. ivit Mobile TV Viewer Tivit Firmware Updater Tool to run the application After activating Tivit Updater proceed with the update according to instructions on the display During the update please do not pull off the cable connected between the Tivit and PC or turn off the power of Tivit If the upgrade completes the power of Tivit is turned off and then on firmware may fail Pull off the USB cable connected between the Tivit and PC and reconnect it If the problem continues please return the settings of Tivit to those at the time it was first released out of the factory and try again A If the Tivit and PC are not connected in a correct manner the update of Trouble Shooting Q amp A Q1 As activated the client application see a message Unable to Connect Device The power of Tivit Check if the power of Tivit is on When using iPhone iPod Touch Check if Wi Fi in Settings is set to ON at iPhone as well as whether a correct SSID for Tivit is selected from the network list The SSID for Tivit is provided in the label on the rear of the body When using Nokia E90 Check whether Device SSID is set to your own SSID for Tivit at Options Settings in this application The SSID for Tivit is provided in the label on the rear of the body Settings of Tivit Mobile TV Viewer application When recharging the Tivit by connecting it to USB ports the functions o
15. ory settings and try again A If the PC fails to recognize the Tivit the application sometimes may not Changing the Settings of Tivit Details about changing the settings of Tivit are as follows m Device SSID When released from the factory the SSID for Tivit is marked in the label on the rear of the body When changing the SSID you should fill in only the combination of lower case alphabet letters and numbers After changing the SSID you need to register the new SSID for Tivit at Wi Fi menu in the smart phone m Password When first released out from the factory there is no password set and the user can determine it as he or she wishes The password must be a combination of only the lower case capital alphabet letters and numbers After setting the password you need to register and select again a SSID for Tivit at Wi Fi menu in the smart phone m Auto Power Off With the Tivit on and if it does not work in any way ina time set selectable among 1m 5m 30m 60m Never the power is automatically turned off If it is set to Never please note that the power does not automatically go off but the batteries can be unnecessarily consumed However with the Auto Power OFF setting is on the power does not go off it the Tivit is being recharged m USB Mode When recharging the Tivit by connecting it to USB ports you can t open the TV channels at the smart phone since the Wi Fi function does not work If you want to watch TV in the sma
16. roadcast channels 3 amp 2 You just need to perform this process only once after purchasing the Tivit The details may differ depending on the smart phone model and the version of the application Aa X41 In the Initial running of Tivit after the purchase it may take approx 3 watch the TV program in Nokia E90 since the Wi Fi function will be disabled automatically If you still want to watch TV in Nokia E90 while recharging it via USB ports of your PC you should set the configuration in Options Settings USB Mode to Off of the client application in Nokia E90 A When recharging the Tivit by connecting it to USB ports of PC you can t display selecting a SSID If this phase is found troublesome select your own SSID for Tivit at Options Settings Device SSID After this activating the application will automatically hook you to Tivit and the SSID selecting display no longer appears A Thereafter accessing the Tivit in Nokia E90 will always bring you to a If the Nokia E90 and Tivit are not accessed normally there appears a warning display as shown on the right In this case you should check whether the Tivit s power is on or Wi Fi settings or whether the Options Settings Device SSID is correctly set to your own SSID for Tivit m Watch DVB H Broadcast Activate Click Tivit Mobile TV Viewer application in Nokia E90 A moment later a list of currently available DVB H
17. rt phone at the same time recharging the Tivit with your PC you should set this mode OFF If you are to watch TV in your PC or upgrade a firmware set it to On m About You can check the version of this application as well as the firmware info of Tivit Password settings A misguided changing of the settings may lead to a failure in accessing the Tivit from the smart phone If accidentally changed the settings can be restored through the Initializing to Factory Settings function A If you not familiar with Wi Fi network do not change the SSID and The specifications or interfaces of an application can be modified without notice For details about firmware or software and User s Manual please refer to our Customer Supporting website 3 11 Upgrading Firmware Tivit provides a firmware upgrading software tool which allow to upgrade new firmware of Tivit with improved functions after your purchasing m Installing the Tivit Updater Application If you run the PC dedicated signal receiving application Tivit Mobile TV Viewer in the installation CD of this product both Tivit Updater and USB driver are simultaneously installed m Activating the Tivit Updater Application Press the Power Button of Tivit on Connect the Tivit and PC with an USB cable After accessing our Customer Supporting website and download the latest version of Tivit to your PC On your PC select Start All Programs T
Download Pdf Manuals
Related Search
Related Contents
Lennox Hearth RX-6020VBK User's Manual Il a une patte bleue QLOADERD USER MANUAL Digitus KVM Switch 1User - 4 PCs Superflow for Troubleshooting Forefront TMG Installation Univex NeatScan Scanner User Manual Philips Forecast 30175/38/48 HP 3C905-TX User's Manual mars - décembre 2014 - Villes et Pays d`art et d`histoire Netgear 8-Port User's Manual Copyright © All rights reserved.
Failed to retrieve file