DVB-S 925 User`s Manual
Contents
1. Pressing ENTER shows the Card Menu in the output video signal Pushing BACK exits the menu and DOWN will lead to the next menu Note The Smartcard must be inserted so that the contacts face downwards 6 Common Interface Displays the type of the Common Interface Module and the smartcard in it if any Pressing ENTER shows the Card Menu in the output video signal Pushing BACK exits the menu and DOWN will lead to the next submenu Note The Common Interface Module must be inserted so that the arrow on it is on the upper side Configuration Menus 16 Volume Level Temperature DVB S 925 User Manual 7 Audio Output 7 1 Volume Level 20 40 60 80 100 ENTER other value Press ENTER to set the audio output level Use the LEFT or RIGHT buttons to select between the preset values Pressing ENTER allows a custom value by moving the cursor to the first digit which can be increased and decreased by pressing UP and DOWN Pressing RIGHT will move the cursor to the next digit etc Pressing ENTER again accepts the manually inserted value and pushing BACK will leave the menu Pushing DOWN will lead to the next submenu 8 Fan Control 8 1 Temperature 35 C 40 C 45 C 50 C 55 C 60 C ENTER other value Press ENTER to set the fan start temperature Use t2. in the VBI of the video to allow the audience to select a teletext or subtitling page from their TV Normally this parameter is set automatically when the specific channel is selected 3 1 Pressing ENTER allows a manual setting by moving the cursor to the first digit which can be increased and decreased by pressing UP and DOWN Pressing RIGHT will move the cursor to the next digit etc Pressing ENTER again accepts the manually inserted value Please refer to the service provider s list for available PID numbers if different than the one automatically chosen Pushing DOWN will lead to the setting of next parameter Video PID number is set automatically when the specific channel is selected 3 1 If needed to change pressing ENTER allows a manual setting Please refer to a service provider s list for available PID DVB S 925 User Manual Configuration Menus 14 3 6 APID 3 7 PCR PID 3 8 Subtitle PID 3 9 Aspect Adjust DVB S 925 User Manual Audio PID number is set automatically when specific audio language is selected 3 2 Audio PID numbers reference different audio streams usually different languages Please refer to the service provider s list for available PID numbers if different than the one automatically chosen Program Clock Reference PID number is set automatically when specific channel is selected 3 1 If needed to change pressing ENTER allows a ma
3. left or right symbol in the display When the parameter in question is set use the BACK button to return to the previous menu level or DOWN button to access the next submenu or function Continue accordingly until all parameters are set The receiver can be returned to a normal state at any time by pressing BACK button until the Idle Menu shows up If no button is pressed the receiver will automatically exit the programming mode after approximately one minute DVB S 925 User Manual Programming 7 Reception State Display 29 C Service Name BER 0000 UP 0000 00 The reception state display shows the e Current Temperature inside the unit e Current Service Name e Bit Error Rate BER of the received stream e Uptime since last reset hours and minutes DVB S 925 User Manual Programming 8 Configuration Menu Main Menu The Main Menu consists of eleven functions Main Menu 1 LNB Setup 2 Tuner 3 Channel 4 Smartcard Update 5 Smartcard 6 Common Interface 7 Audio Output 8 Fan Control 9 Alarm Report 10 Software Version 11 Reset Receiver Descriptions of the submenus can be found in the following chapters DVB S 925 User Manual Configuration Menus 9 1 LNB Setup Pressing ENTER opens the settings for DiSEqC switching LNB LO frequencies and type LNB controlling power and the 22kHz tone DiSEqC None 1 2 3 4 LNB Type Universal 9 7
4. or reboots the power feed for LNB is internally connected to loop through output Now the next device in chain will start feeding LNB thus preserving signal for the rest of the devices 1 4 22kHz Tone Use LEFT or RIGHT to set the 22kHz tone On or Off Pushing BACK exits the LNB Setup Menu and DOWN will lead to the next menu item Note 22 kHz tone must be set to On for Universal type LNB menu 1 2 DVB S 925 User Manual Configuration Menus 11 2 1 Frequency 2 2 Polarity 2 3 Symbol Rate DVB S 925 User Manual 2 Tuner Pressing ENTER will open the Tuner submenu Frequency xxxxx MHz ENTER gt frequency Polarity H V Symbol Rate 22000Ksy 22500Ksy 24500Ksy 26000Ksy 27500Ksy 27800Ksy 28000Ksy ENTER other value Frequency adjustment Pressing ENTER moves the cursor to the first digit which can be increased and decreased by pressing UP and DOWN Pressing RIGHT will move the cursor to the next digit etc Pressing ENTER again accepts the inserted value and pushing DOWN will lead to the next field Note This frequency is the transponder frequency not IF frequency The 22 kHz tone is switched on automatically when the frequency exceeds 11725 MHz if the 22KHz function is enabled menu 1 4 Selects the polarisation The value can be toggled between Horizontal and Vertical by pressing RI
5. the unit is ready for input and output signal connections and configuration using the front panel push buttons as E e ECHOLITE 56 e 1 RS 232 Serial port for software updates 2 DVB CI slot 3 Smart Card slot for Conax scrambling system 4 LCD Display 5 Push buttons for configuration of the unit from left to right Installation 4 Signal Connections Sat IF amp IF Loop Connect a DVB S signal to the SAT IF input of the unit The IF signal can be looped further to the next unit or used as a test point When feeding only a few DVB S 925 receivers from the same LNB the coaxial cable from the satellite dish can be connected directly to one of the receivers and then chained to others Use the loop through connector and 100 mm F to F cable The DVB S 925 has a passive splitter so signal level will attenuate 3dB in each device When chaining is used the first device will feed power to the LNB However all the devices in chain should have LNB power on If the first device in the chain looses its power or reboots the power feed for LNB is internally connected to loop through output Now the next device in the chain will start feeding LNB thus preserving signal for the rest of the devices The LNB voltage output is short circuit protected The voltage circuit will operate normally as soon as the fault causing the overload has been removed Video output BNC female Connect the video output signal fr
6. 1740 co Dy Ie O POPE E Es A Oe E 18 LA O A A A O O 18 10 Software Version tdi li 18 DVB S 925 User Manual Contents 1 11 Reset Receiver Legal Declarations DVB S 925 User Manual Contents 2 Introduction DVB s 925 User Manual General DVB S925is a standalone 19 1RU Digital Satellite Receiver for both free to air and scrambled services It is designed to be used in SMATV Headend station where reliable operation is a prerequisite DVB S 925 receives an MPEG 2 encoded DVB S signal and decodes it to a mode which is compatible for normal analogue TV All parameters of the DVB S 925 are fully programmable using the front panel LCD display and push buttons Features DVB S Satellite front end for QPSK modulated signals Common Interface slot for CA Module Smart Card reader for embedded Conax User Interface by front panel LCD and buttons Watchdog protection for system failures Software updates via front panel Serial Port Introductions 3 Installation DVB S 925 User Manual Mechanical Installation The DVB S925 1 RU is placed into a 19 inch rack Lock the unit into place using screw holes on the edges of the front panel No ventilation space is needed above or under the unit so several of receivers can be installed on top of each other Connect the unit to a 230VAC 50Hz wall outlet and switch on the power from the backside of the unit The front panel LCD display is lit and
7. 5GHz 10 00GHz 10 05GHz 10 60GHz 10 75GHz ENTER other frequency LNB Power Off On 22K Hz Tone Off On 1 1 DiSEqC Pressing ENTER shows the DiSEqC signal routing options 1 4 None turns the signalling off Use LEFT or RIGHT to select between the values Pushing DOWN will leave the menu and leads to the next parameter 1 2 LNB Type When using a universal type LNB with 9 75GHz 10 60GHz LO leave the setting to Universal Note This setting switches on automatically the 22 kHz tone if enabled in menu 1 4 when tuner frequency exceeds 11725 MHz and the LNB voltage if enabled in menu 1 3 is also automatically set according to the polarity control menu 2 2 Other values are for LNB s with fixed LO Pressing ENTER moves the cursor to the number field where a specific value can be inserted Pushing DOWN will lead to the next parameter DVB S 925 User Manual Configuration Menus 10 1 3 LNB Power Use LEFT or RIGHT to set the LNB power On or Off Pushing DOWN will leave the menu and leads to the next parameter Note Changes to parameter take effect after the next changes in tuning parameters menu 2 1 Note Must be set On for Universal type LNB menu 122 Note All receivers with chained IF should have LNB power set to On to ensure proper backup for LNB If the first device in chain looses its power
8. FCHOLITE Echolite International Corporation EGHOLITE DVB S 925 Contents Introduction 3 General PP ehazaucs to vcsuie E E EE OEE ete 3 A sea tensccdetssuesvetesascnieeiees E EEEE E S 3 Installation 4 Mechanical Installation vcd aida a DERSE rS Enaip DEPED dica 4 Signal Comnecti dS cintas iia iia dad 5 Programming 7 General aserrada paid dia 7 Push Button NayigatiON iisen sisinio lidia dolio E DO EEIEIEE S EEEE STRESSE T Reception State Display conato ii ia 8 Configuration Menu 9 Maia Menu sitiada ainia 9 Te ENB Setups snin ieor oiin e nasi iteeed eae asco Ea E een aes 10 l 1 DISEQC usina latido da iii acia 10 1 2 LNB Type priino eais nE E E E E EE E Mian cae aes 10 T 3 LNB POWE suicida tii 11 Ve ZIRE TO ia EE 11 O NN 12 O 12 PA O ON 12 2 3 Symbol Rate ide 12 OA A nn OO 13 341 Select Chanel ao aia 13 B 2 Audio Tk A ios 14 A o sees eos Geet ose tees 14 A caste veiie da ahcubdcnsecak cas ce TEENE auecede vas deetac stecwdieesdanassadesmitecsconaevabes 14 O O A entered Ss 14 BA PUD idad da l 15 357 PER PID uan aiii It 15 3 9 Subtitle PID triana iia 15 3 09 Aspect AGIUSt aun a pi aa 15 4 Smartcard Update iii ai 15 Watehd Og orcarina e ar 16 Die SIVAN CAE E A ET PEE A ETI il E 16 G Common IMEA CE constancia E E A a Hide E 16 TAudo Output adecsc2cseccscik2 cdagdcevecccntecdandcecdsaadelozsed A it ie 17 Volume Levanta 17 8 Fan Control eliana ito oota 17 A O O 17 O dolenssaciaussteebeeastaeseesniee 18
9. FT or RIGHT buttons to toggle between No and Yes confirmation of the reset Pushing ENTER when Yes is displayed resets the receiver and exits the menus Configuration Menu 18
10. GHT or LEFT LNB voltage is adjusted to 14V 18V accordingly Pushing DOWN will lead to the next field Sets the symbol rate Use LEFT or RIGHT to select between the most common values Pressing ENTER allows a custom value by moving the cursor to the first digit which can be increased and decreased by pressing UP and DOWN Pressing RIGHT will move the cursor to the next digit etc Pressing ENTER again accepts the manually inserted value Pushing BACK will leave the menu and sets the new parameters to the receiver and initiates tuning to selected transponder Pushing BACK exits the Tuner Menu and DOWN will lead to the next menu item Configuration Menu 12 3 Channel Press ENTER to obtain a list of available services and to display to the following submenu gt Channel Search Please Wait Select Channel Choose the desired service from the list by using the LEFT or RIGHT buttons Audio Track Choose the desired audio language from the list by using the LEFT or RIGHT buttons Subtitle Choose the desired subtitling language from the list by using the LEFT or RIGHT buttons Program ID Chosen automatically according to selected Channel 3 1 For manual setting of this value press ENTER VPID Chosen automatically according to selected Channel 3 1 For manual setting of this value press ENTER AP
11. ID Chosen automatically according to selected audio track 3 2 For manual setting of this value press ENTER PCR PID For manual setting of this value press ENTER Subtitle PID Chosen automatically according to selected Subtitling 3 3 For manual setting of this value press ENTER Aspect Adjust No Conversion Letter Box If no channels are found check the input settings under LNB Setup and Tuner menus 3 1 Select Channel When the search is complete a list of available services is displayed Choose the desired service from the list by using the LEFT or RIGHT buttons A T V symbol before the service name indicates the presence of a video stream Pushing DOWN will lead to the setting of next parameter DVB S 925 User Manual Configuration Menus 13 3 2 Audio Track 3 3 Subtitle 3 4 Program ID 3 5 VPID A list of available audio languages is displayed Choose the desired one from the list by using the LEFT or RIGHT buttons Pushing DOWN will lead to the setting of next parameter A list of available subtitling languages is displayed Choose the desired one from the list by using the LEFT or RIGHT buttons Subtitles are displayed as white text enclosed in a translucent box to allow better view of the underlying video Pushing DOWN will lead to the setting of next parameter Note Teletext information is also inserted
12. he LEFT or RIGHT buttons to select between the preset values Pressing ENTER allows a custom value by moving the cursor to the first digit which can be increased and decreased by pressing UP and DOWN Pressing RIGHT will move the cursor to the next digit etc Pressing ENTER again accepts the manually inserted value and pushing BACK will leave the menu Pushing DOWN will lead to the next submenu Configuration Menu 17 Error List Reset Errors DVB S 925 User Manual 9 Alarm Report Error List Displays the error list use gt and or lt buttons to browse Reset Errors No Yes Press ENTER to access the error list Use the LEFT or RIGHT buttons to scroll Pressing ENTER shows information on the error in question Pushing BACK will leave the menu and pushing DOWN will lead to the next submenu Use the LEFT or RIGHT buttons to toggle between No and Yes confirmation of the reset Pushing ENTER when Yes is displayed resets the error list Pressing BACK will leave the menu Pushing DOWN will lead to the next submenu 10 Software Version Pressing ENTER will display the version and build date of the software Pushing BACK will leave the menu and pushing DOWN will lead to the next submenu 11 Reset Receiver Press ENTER and use the LE
13. nual setting Please refer to a service provider s list for available PID Subtitle PID number is set automatically when specific subtitling language is selected 3 3 Subtitle PID numbers reference different teletext data streams usually different languages Please refer to the service provider s list for available PID numbers if different than the one automatically chosen Selects the aspect ratio Value can be toggled between No Conversion and Letter Box by pressing RIGHT or LEFT Pushing BACK leaves the Channel Menu and pushing DOWN will lead to the next menu item 4 Smartcard Update Pressing ENTER will open the submenu 4 1 Watchdog Off On Configuration Menus 15 Watchdog DVB S 925 User Manual If the receiver looses signal or an internal problem occurs the watchdog routines will detect it and reboot the device Pressing LEFT or RIGHT buttons toggles the watchdog on off Pushing ENTER verifies the setting and DOWN will lead to the next menu Note The watchdog must be set to Off if an outdated smartcard needs to be updated This will prevent the receiver from continuously rebooting because of problems in decoding Note After the card has received authorisation the watchdog must be turned back on to ensure reliable operation in all reception conditions 5 Smartcard Displays the type of card in the front panel smartcard slot if any
14. om the unit s BNC connector to a DIM TV modulator or to some other signal processing unit DVB S 925 User Manual Installations 5 DVB S 925 User Manual Audio outputs L amp R RCA female Connect the audio output signals L white and R red to a NICAM encoder DIN 001 DIM TV modulator or to some other signal processing unit RS 232 Serial port On the front panel of the unit there also is an RS 232 interface This connection is only used for software updates 6 Main power switch 7 230VAC 50Hz input connector 8 Ventilation Fan 9 Video Out BNC female 10 Audio out R red and L white RCA female 11 Sat IF loop through out F 12 Sat IF input F from left to right Installations 6 Programming General The DVB S 925 has a front panel LCD display four arrow keys and ENTER and BACK push buttons to navigate in the menu and set the receiver parameters Push Button Navigation Pressing ENTER accesses the programming menu Once in the main programming menu the functions can be scrolled by using the UP and DOWN arrow keys Press ENTER again to select a function to configure In the selected sub menu navigate again using the arrow keys A up or down symbol in the LCD display shows the direction of available functions if any Changing or adjusting of the selected parameter is done by LEFT or RIGHT arrow key available options are again marked by a
Download Pdf Manuals
Related Search