Home

Fanvil Product User Manual IP Phone Model: C01

image

Contents

1. Specify the Auto Redial interval Open this function 1f there is a headphones in C60 you can press answer key or line key to answer a call with the headset Enable Call Completion by selecting 1t Enable pre dial Enable Call Waiting by selecting 1t Then the phone reminds whether redial when the caller is busy or rejects if it s ok and the phone finds out that the caller is idle by sip message it will reminds whether redial Turn off this feature you will not hear issued a beep sound with more calls Enable 3 way conference by selecting it If select it the phone will accept the call even if the called number is not belong to the phone The phone will hang up and return to the idle automatically at hands free mode Specify Auto Hand down Time the phone will hang up and return to the idle automatically after Auto Hand down Time at hands free mode and play dial tone Auto Hand down Time at handset mode Enable Ring From Handset by selecting it the phone plays ring tone from handset Enable Intercom Mode by selecting it Enable mute mode during the intercom call If the incoming call is intercom call the phone plays the intercom tone Enable Intercom Barge by selecting it the phone auto answers the intercom call during a call If the current call 1s intercom call the phone will reject the second intercom call Enable Silent Mode by selecting it the phone light will red Mode Turn Off Power
2. E GMT 08 00 Be ing Chongging Hong Kong Urumqi second s LI LI minutes s b b gt gt gt E AAA E E Apply explanation Enable SNTP by selecting it Enable DHCP Time by selecting it then the TIME amp DATE phone will automatically synchronize the standard time Set SNTP Primary Server IP address Set SNTP Secondary Server IP address Select the Time zone according to your location Set the time out the default is 60 seconds Switch the time mechanism between 12 hours and 24 hours Default is 24 hours mode Date format Specify the date format Daylight Saving Time Settings Enable Enable daylight saving time Offset minutes Setup the variety length Month Setup start and end month Week Setup start and end week Day Setup start and end day Hour Setup start and end hours Minute Setup start and end minutes Manual Time Settings Manual Time Settings Year A Month IO Day IN Hour IN Minute PO Apply Notice First of all you need to disable the SNTP service and above the date hours minutes each of which is required to complete and submit to make manual 8 3 3 VOIP 8 3 3 1 SIP Set your SIP server in the following interface DIAL PEER SIP Line Basic Settings gt gt Status Unapplied Domain Realm A Server Address CA Proxy Server Address fo O Server Port Proxy Server Port O Authentication User A Proxy User fo Authentication Password A Proxy Passwor
3. Please do not damage the power cord If power cord or plug is impaired do not use it it may cause fire or electric shock The plug socket combination must be accessible at all times because it serves as the main disconnecting device Do not drop knock or shake it Rough handling can break internal circuit boards Do not install the device in places where there is direct sunlight Also do not put the device on carpets or cushions It may cause fire or breakdown Avoid exposure the phone to high temperature below 0 C or high humidity Avoid wetting the unit with any liquid Do not attempt to open it Non expert handling of the device could damage it Consult your authorized dealer for help or else it may cause fire electric shock and breakdown Do not use harsh chemicals cleaning solvents or strong detergents to clean it Wipe it with a soft cloth that has been slightly dampened in a mild soap and water solution When lightning do not touch power plug or phone line it may cause an electric shock Do not install this phone in an ill ventilated place You are in a situation that could cause bodily injury Before you work on any equipment be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents Table of Content 1 INTRODUCING COL VOIP PHONE sisi aia AA 6 1 1 THANKYOUFORYOUR PURCHASING COL ads 6 1 2 DELIVER CONTENT arab 6 1 3 A tin Rae toot peer ene one Sean ene
4. Save button to save the configuration files Save Save all network and VOIP settings E save as Config File txt c at ills Ib E rn Sn Fila gt ii i 1 f j Ief 11 m ili TH I MIE SAER 1S1 LI POIS Ge MT f l Click Clear button to clear the configuration files Clear Config Setting Explanation You can save all changes of configurations Click the Save button all changes of configuration will be saved and be effective immediately Right clicks on Right click here and select Save Configuration Target As config File txt then you will save the config file in txt format or select Save Target As config File xml then you will save the config file in xml format Clear Configuration User can restore factory default configuration and reboot the phone If you login as Admin the phone will reset all configurations and restore factory default 1f you login as Guest the phone will reset all configurations except for VoIP accounts SIP1 2 and IAX2 and version number 8 3 6 4 UPDATE You can update your configuration with your config file in this web page AUTO PROVISION SYSLOG CONFIG UPDATE ACCESS REBOOT Web Update Select File fs z txt xml au vef csv wav Update TETP FTP Update Sosa 00 User i Password A Apply Fle Name C Type Protocol Update Logo File Delete Logo File Select File Logo File Update Field name Explana
5. Specify the MWI Number Please contact your system administrator for the connecting code Different systems have different codes Overtime of resending subscribe packet Suggest using the default configuration Specify the Conference Type if you select the local you needn t input the conference number Specify the network conference number please contact your system administrator for the network conference number Set expire time of SIP server register default is 60 seconds If the register time of the server requested is longer or shorter than the expired time set the phone will change automatically the time into the time recommended by the server and register again If you want to realize the following function by the server please enter the On Code and Off Code option then when you choose to enable disable following function on your IP phone it will send message to the server and the server will turn on off the function immediately Set the DND On Code When you press the DND hot key the phone will send a message to the server and the server will turn on the DND function Then any calls to the extension will be rejected by the server automatically And the incoming call record will not be displayed in the Call History Set the DND Off Code When you press the DND hot key the phone will send a message to the server and the server will turn off the DND function Set the Always CFwd On Code when you choose to enable the
6. number before making the redial function Number Destination Port Mode 4lias Suri Deleted Length ESET 0 0 0 0 5060 SIP rep redial no suffis 3 BAT 0 0 0 0 5060 SIP rep unredial no suffis 3 3 is appointed prefix code After making the above configuration A can dial 3 plus B s phone number to make the redial function 4 is appointed prefix code After configuration A can dial 4 to cancel redial function User can set prefix in random in the case of no affecting current dialing rules 4 4 Click to dial When user A browses in an appointed Web page user A can click to call user B via a link this link to user B then user A s phone will ring after A hooks off the phone will dial to user B 4 5 Call back This function allows you dial out the last phone call you received 4 6 Auto answer When there is an incoming call after no answer time the phone will answer the call automatically 4 7 Hotline You can set hotline number for every sip and then enter the dialer interface and after Warm Line Time the phone will call out the hotline number automatically 4 8 Application 4 8 1 SMS 1 Press Menu gt Applications gt Enter gt SMS gt Enter 2 Use the navigation keys to highlight the options You can read the message in the Inbox Outbox 3 After view the new message you can press Reply to reply the message and use the 2aB softkey to change the Input Method when enter the reply message press OK th
7. Field name Phone number Destination Port Alias Destination Port Mode Alias Suffix Deleted Length 0 0 0 0 5060 SIP add 0 no suffix 0 0 0 0 0 5060 SIP add 0 no suffix 0 192 168 1 119 5060 SIP no alias no suffix 0 0 0 0 0 5060 SIP rep 010 no suffix al SIP vv Apply Madly e explanation There are two types of matching conditions one 1s full matching the other is prefix matching In the Full matching you need input your desired phone number in this blank and then you need dial the phone number to realize calling to what the phone number is mapped In the prefix matching you need input your desired prefix number and T then dial the prefix and a phone number to realize calling to what your prefix number is mapped The prefix number supports at most 30 digits Set Destination address This is optional config item If you want to set peer to peer call please input destination IP address or domain name If you want to use this dial rule on SIP2 line you need input 255 255 255 255 or 0 0 0 2 in it SIP3 into 0 0 0 3 Set the Signal port the default is 5060 for SIP Set alias This 1s optional config item If you don t set Alias it will show no alias Note There are four types of aliases 1 Add xxx it means that you need dial xxx in front of phone number which will reduce dialing number length 2 All xxx it means that xxx will replace some phone number 3 Del It means that phone will delete the number
8. KEY FUNCTION KEY SOFTKEY Screen Configuration Contrast 1 9 Enable Backlight Function Key Settings Key Type Value Line Subtype Pickup Number Programmable Key Settings Key Desktop Dialer Calling Desktop Long Pressed Up Prev Call Y Left None bl None ka None e Right ok None y Function Key Field name explanation Contrast Set contrast of screen Enable Backlight Set enable disable backlight Line Key Settings Line select Auto SIP1 SIP2 or ITAX2 in function key type After you set 1t you pick up handset or hands free press this function key and then you can use the corresponding SIP line Function Key Settings key Show the function key s serial number Type Memory Key settings can be stored in key storage for each number the standby or off hook select the function keys on the keyboard can call this number Line set the dial mode Auto SIP1 SIP2 AX2 Key Event functions monitor state DTMF In the call send DTMF URL You can input remote book url Value Set the type parameter values Line Choose which lines to use this feature Subtype Select the function parameters Key Event and Memory Event Pickup Number Please input the pickup number When SubType is BLF or presence NOTICE O Memory keys can be configured through the following Speed Dial function through the configuration of the key corresponding to the number of ways as shown below User can press the Fl key to allocate this
9. Light Emergency Call Number Enable Password Dial Password Dial Prefix Password Length DND Return Code Busy Return Code Reject Return Code Hide DTMF Push XML Server P2P IP Prefix Active URI Limit IP Action URL Settings Action URL Settings Block Out Settings blink to remind that there is a missed call instead of playing ring tone Enable Turn Off Power Light by selecting it Specify the Emergency Call Number Despite the keyboard 1s locked you can dial the emergency call number Enable Password Dial by selecting it When number entered is beginning with the password prefix the following N numbers After the password prefix will be hidden as N stand for the value which you enter in the Password Length field For example you set the password prefix is 3 enter the Password Length is 2 then you enter the number 34567 it will display 3 67 on the phone Specify the prefix of the password call number Specify the Password length Specify DND Return code Specify Busy Return Code Specify Reject Return Code Specify the hide DTMF mode Specify the Push XML Server when phone receives request it will determine whether to display corresponding content on the phone which sent by the specified server or not Set Prefix in peer to peer IP call For example what you want to dial is 192 168 1 119 If you define P2P IP Prefix as 192 168 1 you dial only 119 to reach 192 168 1 119 Default is If the
10. P protocol and DiffServ configuration VLAN functionality can use different VLAN IDs by setting signal voice VLAN and data VLAN The VLAN application of this phone is very flexible Do not use VLAN Switchboard ooo al Broadcast Frame Y Chan 1 Use VLAN Switchboard j Broadcast Frame VLAN gt Broadcast lt Domain After Switchboard received the Broadcast Frame transmit to every other port except the send port After Switchboard recelved the Broadcast Frame only transmit it to other port which belong to same VLAN with send port Broadcast Frame SN 2 Y Domain In chart 1 there is a layer 2 that switches without setting VLAN Any broadcast frame will be transmitted to the other ports except the send port For example a broadcast information is sent out from port then transmitted to port 2 3and 4 In chart 2 red and blue indicate two different VLANs in the switch and port 1 and port 2 belong to red VLAN port 3 and port 4 belong to blue VLAN If a broadcast frame is sent out from port 1 switch will transmit it to port 2 the other port in the red VLAN and not transmit it to port3 and port 4 in blue VLAN By this means VLAN divide the broadcast domain via restricting the range of broadcast frame transition Note chart 2 use red and blue to identify the different VLAN but in practice VLAN uses different VLAN IDs to identify SERVICE PORT DHCP SERVICE TIME amp DATE Lin
11. Specify the value of the audio 802 1p priority the range of the value is 0 7 Follow WAN Follow the WAN ID Disable Disable Port VALN Enable Enable Port VLAN and specify the Port VLAN ID different from WAN ID Specify the value of the Port VLAN ID different from WAN ID the range of the value is 0 4095 8 3 24 SERVICE PORT You can set the port of telnet HTTP RTP by this page QoS8WLAN SERVICE PORT Service Port Settings LA Web Server Type HTTP Port HTTPS Port Telnet Port RTP Port Range Start RTP Port Quantity DHCP SERVICE TIME amp DATE Field name Service Port Settings Web Server Type HTTP Port HTTPS Port Telnet Port RTP Port Range Start RTP Port Quantity Notice explanation Specify Web Server Type Set web browser port the default 1s 80 port 1f you want to enhance system safety you d better change 1t into non 80 standard port Example The IP address 1s 192 168 1 70 and the port value is 8090 the accessing address 1s http 192 168 1 70 8090 Before using the https you must download https authentication certification into the phone then set web browser port the default 1s 443 port if you want to enhance system safety you d better change it into non 443 standard port You can access to the web in https after rebooting the phone Set Telnet Port the default is 23 You can change the value into others Example The IP address 1s 192 168 1 70 The telnet port value is 8023 the a
12. Src Address Deny Permit Dest Address xa Protocol Src Mask AAA Port Range Dest Mask A Rule Delete Option Input Output Index To Be Deleted Firewall Configuration In this web interface you can set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet input rule or prevent unauthorized private network devices from accessing the Internet output rule Firewall supports two types of rules input access rule and output access rule Each type supports at most 10 items Through this web page you could set up and enable disable firewall with input output rules System could prevent unauthorized access or access other networks set in rules for security Firewall is also called access list is a simple implementation of a Cisco like access list firewall It supports two access lists one for filtering input packets and the other for filtering output packets Each kind of list could be added 10 items We will give you an instance for your reference Field name Enable Input Rules Enable Output Rules Input Output Deny Permit Protocol Port Range Src Address Des Address Src Mask Dest Mask explanation Select 1t to Enable Input Rules Select 1t to Enable Output Rules Specify current adding rule by selecting input rule or output rule Specify current adding rule by selecting Deny rule or Permit rule Filter protocol type You can select TCP UDP ICM
13. TFTP server Update Logo File Select File Specify the url of the logo file Delete Logo File Select File Select the logo that you want to delete Logo File Logo File Show the logo file 8 3 6 5 ACCESS You can add or delete user account and change the authority of each user account in this web page LCD Menu Password Settings Menu Password Keyboard Lock Settings PIN to Lock Keyboard Password Enable Keyboard Lock User Settings Liser admin guest Add User User Password Confirm User Level User Management Field name Keyboard Password User Settings Wiser admin guest a oO ma mem F User Level Root General AAA Modify Access Configuration explanation Set the password for entering the setting menu of the phone by the phone s key board The password is digit User Level Root General This table shows the current user existed User User Level Password Confirm Set account user name Set user level Root user has the right to modify configuration General can only read Set the password Confirm the password Select the account and click the Modify to modify the selected account and click the Delete to delete the selected account General user only can add the user whose level is General 8 3 6 6 REBOOT AUTO PROVISION SYSLOG CONFIG UPDATE ACCESS REBOOT Reboot Phone Click Reboot button to restart the phone If you modified some configurations which ne
14. also set Prefix and Length For example you want call out 1234567 and you set Password Dial Prefix 123 and Password Length 3 then enter the dial interface and input 1234567 and then the screen will show 123 7 5 13 Action URL amp Active URI 1 Action URL The action that the phone carries out e g open dnd can produces one URL then the phone can send the HTTP Get of the URL to PC then the phone can report the action to the PC 2 Active URI Enter the web page of the phone PHONE gt FEATURE input Active URL Limit IP You can input internet server e g PC IP PC can send one URL to the phone the phone will produce one action for example open dnd so PC can control the phone 5 14 Push XML Enter the web page of the phone gt PHONE gt FEATURE input Push XML Server e g PC IP then PC can push text SMS phonebook advertisement execute etc to phone to update the message or the phone makes an action 6 C01 s basic settings 6 1 Keyboard 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Keyboard gt Enter 2 There are four items DSS Key settings Programmable Keys Desktop Long Pressed SoftKey You can set up respectively on them Press the key Enter to the interface then use the navigation keys to choose the function for the key according to you want 3 Press the key OK to save 6 2 Screen Settings 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Screen Sett
15. always forward function on your phone it will send message to the server and the server will turn on the function immediately When there are calls to the extension the server will always forward it to the set number automatically And the IP phone will not show the record in the call history anymore Set the Always CFwd Off Code when you choose to disable the always forward function on your phone it will send message to the server and the server will turn off the function immediately Busy CFwd On Code Busy CFwd Off Code No Answer CFwd On Code No Answer CFwd Off Code Anonymous On Code Anonymous Off Code Keep Alive Type Keep Alive Interval User Agent Set the Busy CFwd On Code when you choose to enable the busy forward function v on your phone it will send message to the server and the server will turn on the function immediately When there are calls to the extension the server will forward it to the set number automatically based the forward type And the IP phone will not show the record in the call history anymore Set the Busy CFwd Off Code when you choose to disable the busy forward function on your phone 1t will send message to the server and the server will turn off the function immediately Set the No Answer CFwd On Code when you choose to enable the on answer forward function on your phone 1t will send message to the server and the server will turn on the function immediately When there are
16. critical Your system has serious problem Level 3 error The error will affect your system working Level 4 warning There are some potential dangers But your system can work Level 5 notice Your system works well in special condition but you need to check its working environment and parameter Level 6 info the daily debugging info Level 7 debug the lowest debug info Professional debugging info from R amp D person At present the lowest level of debug information is info debug level only can be displayed on telnet AUTO PROVISION SYSLOG UPDATE ACCESS Syslog Settings Server Address Server Port MGR Log Level SIP Log Level IAX2 Log Level Enable Syslag Fi Apply Web Capture Field name Syslog Setting Server Address Server Port MGR Log Level SIP Log Level AX2 Log Level Enable Syslog Web Capture Start Stop 8 3 6 3 CONFIG Syslog Configuration explanation Set Syslog server IP address Set Syslog server port Set the level of MGR log Set the level of SIP log Set the level of IAX2 log Select 1t or not to enable or disable syslog Click the start button when you need capture the WAN packet stream of the phone then open or save the file as the interface Click the end button to stop capturing the packet stream AUTO PROVISION SYSLOG Save Configuration Backup Configuration Clear Configuration Field name Save Configuration Backup UPDATE ACCESS Click
17. dialing and send number according to your set rules 8 3 4 4 CONTACT You can input the name phone number and select ring type for each name here AUDIO FEATURE DIAL PLAN CONTACT REMOTE CONTAC WEB DIAL Phonebook Table Group Hanqup Index Name Office Number Mobile Number Other Number Ring Type Group page Er me Fiend wl Add Add Contact Name COo O Ring Type Office Number O O Line Mobile Number O O Line Other Number fo Line Group Setting Unselected Selected classmate Add 5 E iy WL adify Clear Import Contact List E Select File xml vcf csv Update Export Contact List J Export XML Export CSV Export VCF Group Option Group friend e Name Ring Type Add Modify Delete Delete All Blacklist Settings Blacklist value Add Blacklist Contact Field name explanation Phonebook Table Name Shows the name corresponding to the phone number Hangup Index Mare Office Mum Mobile Mum Other Num Ring Type Shows the detail of current phonebook Notice the maximum capability of the phonebook is 500 items you can select many or a contact to add to group and add to blacklist and delete many or a contact and delete all contacts Add Contact List Name Specify the name corresponding to the phone number Office Number Specify the office number Mobile Number Specify the mobile number Other Number Specify the other number Ring Type Specify th
18. eet St tents ne PR TEM oe A ee ee eer eee eres 6 1 4 PORT FOR C ON NE GIING isis ase eac duit sadv cance asa a 7 Bs ECON INTRODUCTION ceur a a r NEA 8 1 6 PEDINTRODUCHON oaae sa A A EAO 8 2 INITIAL CONNECTING AND SETTIN GS iii dates 10 25k CONNECT THE PHONE aia aaa 10 ZEF Connect to ne Work said ad 10 262 POWweradaplor comme CUO ita 11 DL BASIC TIN ET ACA TON do 1 Dsl INCEWORK SONS a ais 11 3 COS BASIC E UNC DION aiii 13 3 1 IV EASING ACABE Ab 13 Sl Call DEVICE a E Rd 13 IS LI A e sbunanteeed saateaeh een none taaseeade 13 3 2 IANS WERING A CALL aa 13 3 3 DRD aia ito 14 3 4 ANGE ST OR W AIR Dc E E E O AA as 14 YI O A a CPR en S O RDO PRE ROR OREN ST ROR EM ROR re aT ESOT A CE RR EE 14 3 6 CATT WAN en 14 3 7 MUTE 3 saat dad eataecanetasad AEO NOT ANG 14 3 8 CAITR AN SPER aaua aE TIET N cadena A 15 3 9 IWA CONFERI NCE CAL Corera a Ea o 15 IAO MULTIPLE WAT CALE or a a E A E E Ta e A oes 15 A COPSADVANCED FUNCTION iaa 16 4 1 CALEPICKUP peiie ae E T al ie oases daesaaauu menus 16 4 2 JON CALA a 16 4 3 REDIAL UNRE DIA aaae ne a ca 16 4 4 A A EAO AA N nso andes 17 4 5 CAIL BA CR Reca 17 4 6 AUTO ANS WE Rida 17 4 7 FOTE ME AA sas 17 4 8 APPELA TON A neue 17 A A A OP aR RR TR Pe 17 Ho VAC TINO add cani 18 A NOCE NM SS E Sa 18 5 COLES O THER FUNG TIONS acreachodgnnauimaninadunidnn ds 21 5 1 AUTO TPA ND DO WIN adds 21 3 2 BAN ANONYMOUS CAL operani A E A E E A 21 5 3 A O O A EO E 21 5 4 TTA PEER oe aces Zi
19. number by line line Intercom function you can press this key in standby to automatically answer the call and make each other DSS Key 1 intercom User can be configured in accordance with push to talk function the way 4116 was the other number Then press the standby button and make it automatically answer the call 4116 O key can be configured through the following events For example psskey1 Key Event AO A o 8 3 5 2 SOFTKEY Softkey Settings Softkey Mode Screen Call Dialer_______ mM Unselected Softkeys Selected Softkeys None Call Back CBack gt MN MWI lext Line Next Out Pause Phonebook Dir Pickup Prev Line Prev Redial 4 Apply SOFTKEY You can configure different functions in different screens for every softkey 8 3 6 Maintenance 8 3 6 1 Auto Provision AUTO PROVISION YSL CONFIG UPDATE ACCESS REBOOT Auto Provision Settings Current Config Version 2 0002 Common Config Version 2 0002 CPE Serial Number 00100400xH020010000000010e597052 User Password Config Encryption Key O Common Config Encryption Key Save Auto Provision Information DHCP Option Settings gt gt Plug and Play PnP Settings gt gt Phone Flash Settings gt gt TROG9 Settings gt gt Plug and Play PnP Settings gt gt Enable PnP PnP Sener PnP Port PnP Transport PnP Interval hour s Phone Flash Settings gt gt Server Address Config File Name Po Protocol T
20. will use static DNS server The default is selecting it IP Address Subnet Mask 255 255 255 0 IP Gateway DNS Domain Po Primary DNS 202 96 134 133 Secondary DNS 202 96 128 08 If you use static mode you need set it IP Address Input the IP address distributed to you Subnet Mask Input the Netmask distributed to you IP Gateway Input the Gateway address distributed to you Set DNS domain postfix When the domain which DNS Domain you input cannot be parsed phone will automatically add this domain to the end of the domain which you input before and parse it again Primary DNS Input your primary DNS server address Secondary DNS Input your standby DNS server address Service Name ANY User Password If you uses PPPoE mode you need to make the above setting Service Name It will be provided by ISP User Input your ADSL account Password Input your ADSL password Notice 1 Click Apply button after finished your setting IP Phone will save the setting automatically and new setting will take effect 2 If you modify the IP address the web wills not response by the old IP address Your need input new IP address in the address column to logon in the phone 3 If networks ID which is DHCP server distributed 1s same as network ID which is used by LAN of system system will use the DHCP IP to set WAN and modify LAN s networks ID for example system will change LAN IP from 192 168 10 1 to 192 168 11 1 when system u
21. yourself sip information Join Lock Pressing the key you can lock the keyboard Memo MWI Phonebook Pickup Prefix Redial Release Pressing the key you can end the call SMS Transfer Power Light Hot Desking Set the type as Dtmf You can configure the key as Dtmf This key function allows you to easily dial or edit dial number 5 Set the type as URL You need to match a XML Phonebook address pressing the button you can directly access the corresponding remote phonebook 6 Set the type as BLF List Key It needs the cooperation with the Broadsoft server The traditional BLF 1s that every number will need to be subscribed so if the numbers that subscribed is so many that it will cause to obstruction However BLF List Key will put the numbers that needed to be subscribed in a group and the phone use the URL of the group to subscribe and analyze the specific information of each number such as number name state and so on according to the notifications from the server Then set the idle Memory key as BLF List Key later if the state of an object changes the corresponding LED will change 0000000000000 5 C01s other functions 5 1 Auto Handdown 1 Press Menu gt Features gt Enter gt Auto Handdown gt Enter 2 Set the Mode Enable through the navigation key then set Time unit is minute then press Save 3 When the call ends after the time that you have set the phone will back to the idle interface 5
22. 01 to start up 3 There will be displayed black line and INITIALIZING on the screen After finishing startup phone will show greeting current date and time and so forth 4 If phone has registered to the server you can place or answer calls 2 2 Basic Initialization C01 is provided with a plenty of functions and parameters for configuration User needs some network and VoIP knowledge so that user could understand the meanings of parameters In order to make user use the phone more easily and convenient there are basic configurations introduced which is mandatory to ensure phone calls 2 2 1 Network settings Make sure that network is connected already before setting network of phone C01 uses DHCP to get WAN IP configurations so phone could access to network as long as there is DHCP server in it If there is no DHCP server available phone has to be changed WAN network setting to Static IP or PPPoE Setting PPPoE mode for ADSL connection 1 Get PPPoE account and password first 2 Press Menu gt Settings gt Advanced Settings then enter passwords and choose network gt WAN settings gt Connection Mode enter and choose PPPoE through navigation keys and press the Save key 3 Press Back then choose PPPoE Set press Enter 4 The screen will show the current information Press Del to delete it then input your PPPoE user and password and press Save 5 Press Back six times to return to the idle screen 6 Check the
23. 1 MAC Address 00 01 04 05 0b 49 MAC Timestamp 2012 11 09 WAN Settings Obtain DNS Server Automatically Static IP O DHCP PPPoE Apply 302 1X Settings User Password Enable 802 1X O WAN Status WAN Status Active IP Address 192 168 3 59 Current Subnet Mask 255 255 0 0 Current IP Gateway 192 168 1 1 MAC Address 00 01 04 05 0b 49 MAC Timestamp 2012 11 09 Active IP Address The current IP address of the phone Current Subnet The current Netmask address Mask MAC Address The current MAC address of the phone Current IP Gateway The current Gateway IP address MAC Timestamp Shows the time of getting MAC address WAN Settings Obtain DNS Server Automatically Static IP DHCP PPPoE Apply Please select the proper network mode according to the network condition C01 provide three different network settings O Static If your ISP server provides you the static IP address please select this mode and then finish Static Mode setting If you don t know about parameters of Static Mode setting please ask your ISP for them e DHCP In this mode you will get the information from the DHCP server automatically need not to input this information artificially PPPoE In this mode you must input your ADSL account and password You can also refer to 2 2 1 Network setting to speed setting your network Obtain DNS server Select it to use DHCP mode to get DNS address if automatically you don t select it you
24. 2 Ban Anonymous Call 1 Press Menu gt Features gt Enter gt Ban Anonymous Call gt Enter 2 Choose which sip you want to enable Ban Anonymous Call and then press Enter choose Enabled or Disabled through navigation key 3 If you choose Enabled the others can t call the phone by anonymous If you choose Disabled the others can call the phone by anonymous 5 3 Dial Plan 1 Press Menu gt Features gt Enter gt Dial Plan gt Enter 2 The following plans you can set Press to Send Timeout to Send Timeout Fixed Length Number Press to Do BXFER BXFER On Onhook AXFER On Onhook You can enable or disable each dial plan 5 4 Dial Peer 1 Press Menu gt Features gt Enter gt Dial Peer gt Enter 2 Press Add to enter the Edit interface and then input some information For example Number 1T Dest 0 0 0 0 Port 5060 Mode SIP Alisa all 3333 Suffix no suffix Del Len 0 Then press Save Then press Save 3 Input 1 number 1234 in the dial interface you can dial out 3333 You can refer to 8 3 3 4 DIAL PEER 5 5 Auto Redial 1 Press Menu gt Features gt Enter gt Auto Redial gt Enter 2 Choose Mode Enabled or Disabled through the navigation key If you choose Enable you also need to set Interval and Times and then press Save 3 After enable auto redial calling out someone if he 1s in busy it will pop up a prompt box whether to auto redial press OK the phone will call out him according the
25. 5 5 AUTORE DA Gaeren EA E NA ees 21 5 6 CALE COMPLE TION iraa E E E A E a ee 22 Dal RING FROM HEADS O 22 5 8 POWER LIGHT sii cate suse eat da a dd ad 22 5 9 HDE DEMP aen ra AA NEE AE tans 22 IAO PASSWORD DIAD ti tl ist ZL Sell ACHON URLS ACTO EUR 23 O A So RP ee STR PO Pc TROP PP ee ree ere ee Re 23 COPSBASICSETT N SS AE AAA AS tees 24 6 1 KEYBOARD SS ee N 24 6 2 SCREEN O TENG a iS 24 6 3 KINGS E TINGS saps nee acerca T E A E AEE EE A 24 6 4 VOICE VO no A A CUO aE 24 6 5 A tg ead ei allay Rooted vies ulate a iy ae tees lw las d 24 6 6 GREETING WORDS ot a aida 25 6 7 LANGUAGE a ee 29 COS ADVANCED SETTINGS cintia AO Aa contas 26 7 1 AC COUT E tada 26 do NR e CD ne eer 26 Fd SECURITY opaa E E E re Rn ee 26 7 4 NAIN TENANCE oa S E A E E E 26 T3 FACTORY RESE enri a ies a eto o dae e dl 26 WEB CONFIGURATION 00 tii aos ocaRd S 21 8 1 INTRODUCTION OF CONFIGURATION serian E Ze Sol WAYS LO CON laa 21 S2 Password Coni sura Oon ennaa a a ts 21 8 2 SETTING VIA WEB BROWSER adds 27 8 3 CONFIGURATION VIA WE Benina E A A ES 28 A A sachs a a se cnet nice a anette oni obsanune nanaceaneeee 28 32 NETWORK ee a i a ee 33 SS VO nO A orn mE Erp Ree aa 43 ps PHON A O E Po vamuacceneeunstats 57 ceo wee EUNCTON TSE Sas 69 0 0 M loe ipica 72 Sr DECO ada d a 80 83S LOGOUT uso lalo flo sisi circo ii 87 9 APPENDIX 00 ii A A stessueteeecexe 88 9 1 9 1 1 9 1 2 9 1 3 9 1 4 9 2 SPECIFICATION aida 88 A A O O o E O A aaah eae aS 88
26. 5mm 1 5kg 9 1 2 Voice features SIP supports 2 SIP servers Support SIP 2 0 RFC3261 and correlative RFCs Codec G 711A u G 723 1 high low G 729a b G 722 G 726 Echo cancellation G 168 Compliance in LEC additional acoustic echo cancellation AEC can reach 96ms max filter length in hands free mode Support Voice Gain Setting VAD CNG Support full duplex hands free Support multi line HD Voice SIP support SIP domain SIP authentication none basic MD5 DNS name of server Peer to Peer IP call Automatically select calling line if one line can t be connected the phone can automatically switch to other line to call 9 kinds of ring types and 3 user defined music rings DTMF Relay support SIP info DTMF Relay RFC2833 SIP application SIP Call forward transfer blind attended hold waiting 3 way talking SMS pickup join call redial unredial multi line intercom BLF presence push to talk auto redial call return Call control features Flexible dial map hotline empty calling No reject service black list for reject authenticated call white list limit call no disturb caller ID CLIR reject the anonymous call CLIP make a call with anonymous Dial without register Support phonebook 500 records Incoming calls outgoing calls missed calls Each supports 300 records Support IAX2 4 DSS keys Soft keys programmable function keys programmable Code synchronization via IP PBX IMS Support click to dial via we
27. A A O A A Coenen EN 88 NetWork ear 89 MaInteNANnCe ANG mana cementos 90 DIG CHARACTER MAP TABLE ide 90 1 Introducing C01 VoIP Phone 1 1 Thank you for your purchasing C01 Thank you for your purchasing C01 C01 is a full feature telephone that provides voice communication over the same data network that your computer uses This phone s functions not only much like a traditional phone allowing to place and receive calls and enjoy other features that traditional phone has but 1t also own many data services features which you could not expect from a traditional telephone This guide will help you easily use the various features and services available on your phone 1 2 Delivery Content Please check whether the delivery contains the following parts The base unit with display and keypad The handset The handset cable The power supply The Ethernet cable The User Manual you may download from our website IP Phone are designed to look like conventional phones the following photo shows a broad overview of the IP Phone 1 3 Keypad Key Key name Function Description Navigation key assist users for operating In desktop dialer calling desktop long pressed state they have special function You can configure through the web page according to your patterns of use Navigation Mute Press this key in calling mode you can hear the other side and the other side cannot hear you 1 In the hook off hands free mode use the k
28. Address Input the IP address distributed to you Subnet Mask Input the Netmask distributed to you IP Gateway Input the Gateway address distributed to you Set DNS domain postfix When the domain which you DNS Domain input cannot be parsed phone will automatically add this domain to the end of the domain which you input before and parse it again Primary DNS Input your primary DNS server address Secondary DNS Input your standby DNS server address Quick SIP Settings Display Name Server Address Server Port Authentication User S liseli Password SIP User Enable Registration Display Name Set the display name Server Address Input your SIP server address Server Port Set your SIP server port Authentication User Input your SIP register account name Authentication Input your SIP register password Password SIP User Input the phone number assigned by your VOIP service provider Enable Registration Start to register or not by selecting it or not WAN Connection Mode Static IP Static IP Address 192 168 1 1 9 IP Gateway 192 168 1 1 SIP Server Address 192 168 1 2 Account 4217 Fhone Number 4217 Registration Enabled Display detailed information that you manual config Choose DHCP MODE click Next and configure SIP default SIP1 simply also can browse too Click Back can return to the last page Like Static IP MODE Choose PPPoE MODE click Next and configure SIP the PPPoE account password and SIP default SIP1 simpl
29. F3nvil FANVIL TECHNOLOGY GO LTO anvil SMART VOIP Fanvil Product User Manual IP Phone Model CO1 Version V2 2 0 0 2009 Fanvil technology Co Ltd All rights reserved This document is supplied by Fanvil Technology Co Ltd No part of this document may be reproduced republished or retransmitted in any form or by any means whatsoever whether electronically or mechanically including but not limited to by way of photocopying recording information recording or through retrieval systems without the express written permission of Fanvil Technology Co Ltd Fanvil Technology Co Ltd reserves the right to revise this document and make changes at any time and without the obligation to notify any person and or entity of such revisions and or changes Product specifications contained in this document are subject to change without notice W W W FAN VIL COM ADD Unit 4A Building NO 7 Tian An Industrial Park Nanshan District Shenzhen TEL 86 755 264 02199 Safety Notices Please read the following safety notices before installing or using this phone They are crucial for the safe and reliable operation of the device Please use the external power supply that 1s included in the package Other power supplies may cause damage to the phone affect the behavior or induce noise Before using the external power supply in the package please check with home power voltage Inaccurate power voltage may cause fire and damage
30. First Codec Third Codec Fifth Codec Onhook Time Handset Input Volume Speakerphone Volume G 729AB Payload Length G 722 Timestamps Enable VAD Field name First Codec Second Codec Third Codec Fourth Codec Fifth Codec Sixth codec Handset Input Volume Hands free Volume G729AB Payload Length Onhook Time Default Ring Type Handset Output Volume Speakerphone volume DIAL PLAN CONTACT REMOTE CONTAC Second Codec Fourth Codec sixth Codec millisecond s Default Ring Type 1 9 Handset Output Volume 1 9 1 9 Ring Volume 1 9 Tone Standard G 723 1 Bit Rate O DTMF Payload Type 96 127 AUDIO Configuration explanation The first preferential DSP codec G 711A u G 722 G 723 1 726 32 G 729AB None The second preferential DSP codec G 711A u G 722 G 723 1 726 32 G 729AB None The third preferential DSP codec G 711A u G 722 G 723 1 726 32 G 729AB None The forth preferential DSP codec G 711A u G 722 G 723 1 726 32 G 729AB None The fifth preferential DSP codec G 711A u G 722 G 723 1 726 32 G 729AB None The sixth preferential DSP codec G 711A u G 722 G 723 1 726 32 G 729AB None Specify Input MIC Volume grade Specify Hands free Volume grade Set G729 Payload Length Specify the least reflection time of Hand down the default is 200ms Select Ring Type Specify Output receiver Volume grade Specify Speakerphone Volume grade Ring Volume G722 Timestamps G723 1 Bit Rate Default Ring
31. HCP If the screen shows the IP address and gateway which were set just now it shows that DHCP mode takes effect 3 COL S basic function 3 1 Making a call 3 1 1 Call Device You can make a phone call via the following devices 1 Pick up the handset icon will be showed in the idle screen 2 Press the Speaker button 1 icon will be showed in the idle screen 3 Press the Headset button if the headset is connected to the Headset Port in advance The icon 4 will be showed in the idle screen You can also dial the number first and then choose the method you will use to speak to the other party 3 1 2 Call Methods You can press an available line button if there is more than one account then 1 Dial the number you want to call 2 Press History softkey use the navigation buttons to highlight your choice press Left Right button to choose Missed Calls Incoming Calls and Outgoing Calls 3 Press the R SEND button to call the last number called 4 Press the programmable keys which are set as speed dial button Then press the Send button or Dial softkey to make the call if necessary 3 2 Answering a Call Answering an incoming call 1 If you are not on another phone lift the handset using or press the Speaker button Answer softkey to answer using the speaker phone or press the headset button to answer the headset 2 If you are on another call press the answer softkey During the conversation you can alte
32. Interval and Times that you set 5 6 Call completion 1 Press Menu gt Features gt Enter gt Call Completion gt Enter 2 Enable the function through the navigation key and then Save 3 Call out others if he is in busy it will pop up a prompt Call Completion Waiting number Press OK when he is in idle it will pop up a prompt Call Completion Call number Press OK the phone will call out the number automatically 5 Ring From Headset 1 Press Menu gt Features gt Enter gt Ring From Headset gt Enter 2 Enable this function through the navigation key the phone connects the headset when the phone has an incoming call it will ring from the headset 5 8 Power Light 1 Press Menu gt Features gt Enter gt Power Light gt Enter 2 Enable this function through the navigation key 9 9 Hide DIMF 1 Press Menu gt Features gt Enter gt Hide DTMF gt Enter 2 Through the navigation key to choose Disabled All Delay Last Show When you set up a call with others and need to input the DTMF the DTMF will show as you have set 5 10 Ban Outgoing 1 Press Menu gt Features gt Ban Outgoing gt Enter 2 Enable this function you can not call any number 5 11 Pre Dial 1 Press Menu gt Features gt Pre Dial gt Enter 2 Enable this function you will realize Pre Dial founction 5 12 Password Dial 1 Press Menu gt Features gt Enter gt Password Dial gt Enter 2 Enable this function you can
33. Netmask of the lease table IP Gateway Set the Gateway of the lease table Leased Time Set the Lease Time of the lease table DNS Server Set the default DNS server IP of the lease table Click Address the Add button to submit and add this lease table DHCP Lease Table Delete Leased Table Name Select name of lease table click the Delete button will delete the selected lease table from DHCP lease table DNS Relay Enable DNS Relay Apply Enable Select DNS Relay the default 1s enabled Click the DNS Relay Apply button to become effective Notice 1 The size of lease table cannot be larger than the quantity of C network IP address We recommend you to use the default lease table and not modify 1t 2 If you modify the DHCP lease table you need save the configuration and reboot 8 3 2 6 TIMESDATE Setting time zone and SNTP Simple Network Time Protocol server according to your location you can also manually adjust date and time in this web page Simple Network Time Protocol SNTP Settings Enable SNTP Enable DHCP Time Primary Server Secondary Server Timezone Resync Period 12 Hour Clock Date Format Daylight Saving Time Settings Enable Offset Month Week Day Hour Minute Manual Time Settings Year Month Day Hour Minute Field name Simple Network Time Protocol SNTP Settings Enable SNTP Enable DHCP Time Primary Server Secondary Server Time Zone Resync Period 12 Hour Clock LI
34. P or IP Set the filter Port range Set source address It can be single IP address network address complete address 0 0 0 0 or network address similar to 0 Set the destination address It can be IP address network address complete address 0 0 0 0 or network address similar to Set the source address mask For example 255 255 255 255 means just point to one host 255 255 255 0 means point to a network which network ID is C type Set the destination address mask For example 255 255 255 255 means just point to one host 255 255 255 0 means point to a network which network ID is C type Click the Add button if you want to add a new output rule Then enable out access and click the Apply button So when devices execute to ping 192 168 1 118 system will deny the request to send icmp request to 192 168 1 118 for the out access rule But if devices ping other devices which network ID is 192 168 1 0 it will be normal Click the Delete button to delete the selected rule 8 3 7 3 NAT NAT is abbreviated from Net Address Translation it s a protocol responsible for IP address translation In other word it is responsible for transforming IP and port of private network to public also is the IP address mapping which we usually say Legal IP address U0 T e SUEI NAT Equipment Inner network BL amp DMZ config In order to make some intranet equipment support better service for ext
35. Set your Proxy SIP server port Input your Proxy SIP server account Input your Proxy SIP server password Set the sip domain if needed otherwise this VoIP phone will use the Register server address as sip domain automatically Usually it is same with registered server and proxy server IP address Input the Backup Server Address if the primary server is unavailable then the phone will enable the Backup Server Address Specify the Backup Server Port Start to register or not by selecting it or not Use the navigation keys to highlight the desired one Codecs Enable Codecs Advanced SIP Setting Forward Type Forward Number No Answer Forward Wait Time Enable Hot Line Hot Line Number Warm Line Wait Time Transfer Timeout BLF Server SIP Encryption SIP Encryption Key RTP Encryption RTP Encryption Key Enable Auto Answer Auto Answer Timeout Enable Session Timer Session Timeout in the Enable Disable Codecs list and press the desired to move to the other list Select call forward mode the default is Off Off Close down calling forward Busy If the phone 1s busy incoming calls will be forwarded to the appointed phone No answer If there is no answer incoming calls will be forwarded to the appointed phone after a specific Always Incoming calls will be forwarded to the appoint phone immediately The phone will prompt the incoming while doing forward Specify the number you want to forward Speci
36. Type Tone Standard Enable VAD DTMF Payload Type 8 3 4 2 FEATURE Specify Ring Volume grade 160 20ms or 320 20ms is available 5 3 kb s or 6 3 kb s is available Set up the ring by default Select Tone Standard Select 1t or not to enable or disable VAD If enable VAD G729 Payload length could not be set over 20ms Set DTMF Payload Type In this web page you can configure Hotline Call Transfer Call Waiting 3 Ways Call Black List FEATURE white list Limit List and so on AUDIO Feature Settings DND Do Not Disturb Enable Call Transfer Semi Attended Transfer Enable Auto Handdown Auto Handdown Time Enable Auto Redial Auto Redial Interval Auto Redial Times Auto Headset Enable Intercom Enable Intercom Tone P2P IP Prefix Turn Of Power Light Emergency Call Number Enable Password Dial Password Dial Prefix Password Length DIAL PLAN CONTACT REMOTE CONTACT O Ban Outgoing Enable Call Waiting Enable 3 way Conference Accept Any Call second s Enable Call Completion dl Enable Pre Dial 1 180 second Enshje silent Mode 1 100 Hide DTMF Ring From Headset Enable Intercom Mute Enable Intercom Barge A DND Return Code Busy Return Code Reject Return Code E Active URI Limit IP O O Push XML Server lo 0 31 Enable Call Waiting Tone Apply WEB DIAL O E td la O LI Action URL Settings setup Completed PT Registration Success PT Registration Disabled PT Registratio
37. Zwxyz 4GHlghi i o E 6MNOmnO SEND
38. ame Quote Enable user phone Click To Talk Enable BLF List BLF List Number Apply gt E F DO 0 9 second s P L second s d second s Local 3600 second s dr second s COMMON RFC3261 060 one lt g SIP Global Settings gt gt Strict Branch E Enable Group L Registration Failure Retry Time 32 second s SIP Config Field name explanation SIP Line Choose line to set info about SIP there are 4 lines to choose You can switch by Load button Basic Settings Status Server Address Server Port Authentication User Authentication Password SIP User Display Name Proxy Server Address Proxy Server Port Proxy User Proxy Password Domain Realm Backup Server Address Backup Server Port Enable Registration Codecs Settings Disable Shows 1f the phone has been registered the SIP server or not or so show Unapplied Input your SIP server address Set your SIP server port Input your SIP register account name Input your SIP register password Input the phone number assigned by your VoIP service provider Phone will not register 1f there 1s no phone number configured Set the display name Set proxy server IP address Usually Register SIP Server configuration 1s the same as Proxy SIP Server But if your VoIP service provider gives different configurations between Register SIP Server and Proxy SIP Server you need make different settings
39. ation Specify the PnP Server Specify the PnP Server Specify the PnP Transfer protocol Specify the Interval time unit is hour Set FTP TFTP HTTP server IP address for auto update The address can be IP address or Domain name with subdirectory Set configuration file s name which need to update System will use MAC as config file name if config file name keep blank For example 000102030405 Specify the Protocol type FTP TFTP or HTTP Specify update interval time unit is hour Different update modes 1 Disable means no update 2 Update after reboot means update after reboot 3 Update at time interval means periodic update Enable TRO069 by selecting it Specify the ACS Server Type Specify the ACS Server URL Specify ACS User ACS Password Specify ACS Password TRO69 Auto Login Enable TRO69 Auto Login by selecting it Inform Sending Specify the inform Sending Period unit is second Period 8 3 6 2 SYSLOG Syslog is a protocol which is used to record the log messages with client server mechanism Syslog server receives the messages from clients and classifies them based on priority and type Then these messages will be written into log by some rules which administrator can configure This is a better way for log management 8 levels in debug information Level 0 emergency This is highest default debug info level You system cannot work Level 1 alert Your system has deadly problem Level 2
40. b phone book Voice codec setting for each SIP line Support keypad lock and emergency call during the keypad lock Customized Icd logo Ring play via headset or speaker setting Signal tone parameters customized Phonebook supports vcard standard 12 24 hours time display Support daylight saving time Support path group Support SIP Privacy Support SMS Support MWI Support Speed dial Support XML 9 1 3 Network features WAN LAN support bridge and router model Support PPPoE for xDSL Support basic NAT and NAPT Support VLAN optional voice vlan data vlan NAT Penetrate Stun Penetrate Support DMZ Support VPN L2TP OPEN VPN function Wan Port supports main DNS and secondary DNS server can select dynamically to get DNS in DHCP mode or statically set DNS address Support DHCP client on WAN Support DHCP server on LAN QoS with DiffServ Network tools in telnet server including ping trace route telnet client 9 1 4 Maintenance and management Upgrade firmware through POST mode Web telnet and keypad management Management with different account right LCD and WEB configuration can be modified into requested language and support multi language dynamically shifted Upgrade firmware through HTTP FTP or TFTP Telnet remote management upload download setting file Support Syslog Support Auto Provisioning upgrade firmware or configuration file 9 2 Digit character map table 1 5 2ABCabc A 8TUVtuy 3DEFdef 9 IWXY
41. calls to the extension the server will forward 1t to the set number automatically based the forward type And the IP phone will not show the record in the call history anymore Set the No Answer CFwd Off Code when you choose to disable the busy forward function on your phone 1t will send message to the server and the server will turn off the function immediately Set the Anonymous On Code When you choose to enable the anonymous call function on your IP phone it will send information to the server and the server will enable the anonymous call function for your IP phone automatically Set the Anonymous Off Code When you choose to disable the anonymous call function on your IP phone it will send information to the server and the server will disable the anonymous call function for your IP phone automatically Specify the keep alive type if the type is option the phone will send option sip message to server every NAT Keep Alive Period s then the server responses with 200 to keep alive If the type is UDP the phone will send UDP message to server to keep alive every NAT Keep Alive Period s Set examining interval of the server default 1s 60 seconds Set the user agent if have the default 1s VoIP Phone 1 0 DTMF Type Local Port Ring Type Enable Via Rport Enable PRACK Enable Long Contact Convert URI Dial Without Registered Ban Anonymous Call Enable DNS SRV Server Type REC Protocol Edition Transport Protoco
42. ccessing address is telnet 192 168 1 70 8023 Set the RTP Start Port It is dynamic allocation Set the maximum quantity of RTP Port the default is 200 1 You need save the configuration and reboot the phone after set this page 2 Please REBOOT the system if you modify the HTTP or telnet port number the new number should be greater than 1024 3 If you set O for the HTTP port it will disable HTTP service 8 3 2 5 DHCP SERVICE DHCP Client Table Leased IP Address Client MAC Address DHCP Lease Table Mame Start IP End IP Leased Time Subnet Mask IP Gateway DNS DHCP Lease Table Settings Leased Table Name fs Start IP Address rs End IP Address fF Leased Time O O minute s Subnet Mask IP Gateway DNS Server Address fs Add DHCP Lease Table Delete Leased Table Name DNS Relay Enable DNS Relay DHCP SERVICE Field name explanation DHCP Lease Table IP MAC mapping table If the LAN port of the phone connects to a device this table will show the IP and MAC address of this device DHCP Lease Table Name Start IP End IP Leased Time Subnet Mask IP Gateway DNS Shows the DHCP Lease Table the unit of Lease time is Minute Lease Table Name Specify the name of the lease table Start IP Address Set the start IP address of the lease table Set the end IP address of the lease table the network End IP Address device connected to LAN port will get IP address between Start IP and End IP by DHCP Subnet Mask Set the
43. ccount User can dial out on a BLF configured key Please refer to LED Instruction for more detail about the LED status in different situation Note In the Web interface you can also set the pickup number to active the pickup function For example if you set the BLF number as 212 and the pickup number is 189 then when there is an incoming call to 212 press the BLF key it will call out the 189 automatically to pick up the incoming call on 212 Presence Presence is called present and compared to the BLF it can also check whether object online Note You can subscribe the BLF and presence station of the same number at the same time MWI When the key is configured as MWI you are allowed to access voicemail quickly by pressing this key Call park you need setting a server number when you have set what represent Call park If you have a calling and you busy now you could press the key and hear a number then you could choose other phone and input this number so you can directly recover call 2 Set the type as Line You can set these keys as line keys and press it it will enter dialer interface 3 Set the type as Key Event You can set these keys as Key Event and the subtype have many options Choose one and 1t will have corresponding function None Auto Redial Off Auto Redial On Call Back Call Forward DND Flash Headset History Hold Hot Desking Pressing the key you can clear all sip information and register
44. d A SIP User O Backup Server Address fo Display Name Backup Server Port Enable Registration F Server Name fo O Codecs Settings gt gt Disabled Codecs G 114 G 11U G22 G 723 1 G 726 32 G 729AD Advanced SIP Settings gt gt Forward Type Forward Number No Ans Fwd Wait Time Transfer Timeout SIP Encryption SIP Encryption Key RTP Encryption RTP Encryption Key Subscribe For MWI MWI Number Subscribe Period Enable Service Code DND On Code Always CFwd On Code Busy CFwd On Code No Ans CFwd On Code Anonymous On Code Keep Alive Type User Agent DTMF Type DTMF SIP INFO Mode Ring Type Enable Rport Enable PRACK Enable Long Contact Convert URI Dial Without Registered Ban Anonymous Call Enable DNS SRY Enable Missed Call Log Use VPN Transport Protocol 0 120 second s lo second s CI 3600 secondis SIP Option RFC2833 Send 10 11 Default on Enabled Codecs Enable Hotline Hotline Number Warm Line Wait Time BLF Server Enable Auto Answer Auto Answer Timeout Enable Session Timer Session Timeout Conference Type Conference Number Registration Expires DND Off Code Always CFwd Off Code Busy CFwd Off Code No Ans CFwd Off Code Anonymous Off Code Keep Alive Interval Server Type RFC Protocol Edition Local Port Anonymous Call Edition Keep Authentication Ans With a Single Codec Auto TCP Enable Strict Proxy Enable GRUU Enable Displayn
45. e ring type for the phone number Line Specify the sip line for the each number Group setting Select the group from the unselected group to selected list for the contact you can select many groups for the contact Notice the add button for adding a new contact the modify button for modifying the added contact the clear all button for clear all input information of the contact Group Option Group Select the added groups then modify or delete and so on Name Input the name of the group then click the add button you can add a new group Ring Type Specify the ring type for the group as adding a new group Blacklist Settings Type Select the blacklist type you can select number or prefix of number Value Input number or prefix of number Line Select the sip line Notice the add button for adding a new blacklist the delete button for deleting one item the delete all button for deleting all items If user does not want to answer some phone calls add these phone numbers to the Black List Support for X format which is to match any one For example 4xxx expresses any number with prefix 4 which length is 4 will be forbidden to be responded DOT means matching any arbitrary number digit For example 6 expresses any number with prefix 6 will be forbidden to be responded If user wants to allow a number or a series of number incoming he may add the number s to the list as the white list rule The configuration rule is
46. ed prefix code After making the above configuration C can dial 1 plus B s phone number to pick up A s call User can set prefix in random in the case of no affecting current dialing rules 4 2 Join call When B 1s calling C A can join in the existing call by inputting an appointed prefix numbers plus B or C number if B or C also supports join call The following chart shows how to configure an appointed prefix in dial peer to have join call function Number Destination Port Mode Alias Suffix Deleted Length seal 0 0 0 0 060 SIP rep joincall no suffis a 2 means appointed prefix code After making the above configuration A can dial 2 plus B or C number to join B and C s call User can set prefix in random in the case of no affecting current dialing rules 4 3 Redial Unredial If B is in busy line when A calls B A will get notice busy please hang up If A want to connect B as soon as B 1s in idle he can use redial function at the moment and he can dials an appointed prefix number plus B s number to realize redial function What is redial function A can t not build a call with B when B is in busy then A will subscribe B s calling mode at 60 second intervals Once B is available A will get reminder of rings to hook off while a hooks off A will call B automatically If at this time A is occupied temporarily and unwilling to contact B A also can cancel the redial function by dialing an appointed prefix plus B s
47. ed the phone s reboot to be effective you need click the Reboot then the phone will reboot immediately Notice Before reboot you need confirm that you have saved all configurations 8 3 7 SECURITY 8 3 7 1 WEB FILTER WEB FILTER FIREWALL SECURITY Web Filter Table Start IP Address End IP Address Option Web Filter Table Settings Start IP Address End IP Address Add Web Filter Setting Enable Web Filter Apply WEB Filter User could make some device own IP which is pre specified access to the MMI of the phone to config and manage the phone Field name explanation Web Filter Table Settings Add or delete the IP address segments that access to the phone Set initial IP address in the Start IP column Set end IP address in the End IP column and click Add to add this IP segment You can also click Delete to delete the selected IP segment Web Filter setting Select it or not to enable or disable Web Filter Click Apply to make it effective Notice Do not set your visiting IP outside the Web filter range otherwise you cannot logon through the web 8 3 7 2 FIREWALL WEB FILTER Firewall Type Enable Input Rules Enable Output Rules CI Apply Firewall Input Rule Table Index Deny Permit Protocol Src Address Src Mask Dest Address Dest Mask Range Port Firewall Output Rule Table Index Deny Permit Protocol Src Address Src Mask Dest Address Dest Mask Range Port Firewall Settings Input Output
48. ed to enter the password then you can listen to your new and old messages 4 9 Programmable Key Configuration The phone has 4 programmable keys which are able to set up to many functions per key The following list shows the functions you can set on the programmable keys and provides a description for each function The default configuration for each key is N A which means the key hasn t been set for any functions 1 Set the type as Memory Key Press Menu gt Settings gt Basic Settings gt Enter gt Keyboard gt DSS Key Settings you have two options Line Key Settings and Function Key Settings choose one you want to make the assignment use the navigation key to choose the type as memory key In the Dial field you have some options such as Normal Speed Dial Intercom BLF Presence MWI Call Park Speed dial You can configure the key as a simplified speed dial key This key function allows you to easily access your most dialed numbers Intercom You can configure the key for Intercom code and it is useful in an office environment as a quick access to connect to the operator or the secretary BLF BLF is also called Busy lamp field and it is used to prompt the user to pay attention to the state of the object than has been subscribed and used to cooperate with the server to pick up the phone call You can configure the key for Busy Lamp Field BLF which allows you to monitor the status idle ringing or busy of other SIP a
49. en use the navigation keys to select the line from which you want to send then Send 4 If you want to write a message you can press New and enter message Use the 2aB softkey to change the Input Method When you input the message you want to send press OK then use the navigation keys to select the line from which you want to send then Send 5 If you want to delete the message after view the message press Del then you have three options to choose Yes All No 4 8 2 Memo You can add some memos to record some important things to remind you Press Menu gt Application gt Memo gt Enter gt Add There are some options to configure Mode Date Time text Ring When the configuration is completed press Save 4 8 3 Ping 1 Input that the IP you want then you press start You can also press delete for modify IP and change the input method when you input errors 2 You wait for some time that LCD appear OK what means Ping successful when you finished entering the IP Otherwise Ping is failed 4 8 4 Voice Mail 1 Press Menu gt Application gt Voice Mail gt Enter 2 Use the navigation keys to highlight the line for which you want to set press Edit and use the navigation key to turn on the mode and the input the number Press 2aB softkey to choose the proper input method 3 Press Save to save the change 4 To view the new voicemail Press the Voicemail softkey directly Press Dial then you may be prompt
50. ert Transfer During the talk press Transf firstly and then press Send after inputting the number that you want to transfer You are waiting for connection now press Transf and the transfer will be done To use this feature you need enable call waiting and call transfer first 3 9 3 way conference call 1 Press the Conf softkey during an active call 2 The first call is placed on hold Then you will hear a dial tone Dial the number to conference in then press Send key 3 When the call is answered press Conf and add the first call to the conference 4 If you want to release the conference press Split key 3 10 Multiple way call If user has 2 line calls and wants to invite the three party during the call they can press Sofetkey Conf or Softkey XFER New Call press OK enter the number then press Send and wait for the other party to answer When the multiple way calls you can press the arrow keys to select a call 4 CO01 s advanced function 4 1 Call pickup Call pickup is implemented by simulating pickup function of PBX it s that when A calls B B rings but no answer at this moment C can hook off and input an appointed prefix plus B s number pick up A s call and talk with A The following chart shows how to configure an appointed prefix in dial peer to have call pick up function Number Destination Port Mode Alias Suttix Deleted Length ebay 0 0 0 0 5060 SIP rep pickup no suffis 3 1 means appoint
51. explanation Shows the current VPN IP address Select L2TP You can choose only one for current state After you select it you d better save configuration and reboot your phone Enable VPN VPN Server Address VPN User VPN Password 8 3 7 5 SECURITY Select 1t or not to enable or disable VPN Set VPN L2TP Server IP address Set User Name access to VPN L2TP Server Set Password access to VPN L2TP Server FIREWALL Update Security File Delete Security File SIP TLS Files HTTPS Files OpenVPN Files Field name Update Security File Select Security File Delete Security File Select Security File SIP TLS File Security explanation Select the security file you want to update then click Update button to update Select the security file you want to delete then click Delete button to update Show SIP TLS authentication certification file HTTPS File Show HTTPS authentication certification file Open VPN Files Show Open VPN File authentication certification file 8 3 8 LOGOUT Logout Click Logout button to logout the system Click Logout and you will exit web page If you want to enter it next time you need input user name and password again 9 Appendix 9 1 Specification 9 1 1 Hardware Input Output Output 5V 1A Idle 2 5W Active 2 8W Consumption 74 x 28mm Temperature Relative Humidity 10 65 CPU Broadcom VoIP Broadcom VoIP chipset ei 16MB a x Wx 295 X 295 X 17
52. ey Redial to dial the last call number 2 In stand by mode it has a function to check the REDIAL Outgoing Call Hands free Make the phone into hands free mode light call Indicator Tf the light blinking indicate the phone has missed Keys combination include functions such as Sa a a History Directory DND Menu Del Redial Send Soft key 1 2 3 4 Digital keyboard 1 4 Port for connecting Port Port name Power switch LAN Quit Answer Divert Reject Hold Transfer Conf Cl ose and so on Inputting the phone number or DTMF DSS keys You can configure them in the web page description Input SV AC 1A 10 100M Connect 1t to Network 10 100M Connect 1t to PC Headset Port type RJ 9 connector 1 5 Icon introduction Icon Description A Call out Call i KE gt o Call hold Auto answer Call mute Contact DND Do not Disturb In hand free mode In headset mode SMS Missed call Call forward 1 6 LED introduction Table 1 Programmable key LEDs for BLF LED Status Description Steady green The object is in idle status Slow blinking red The object is ringing Steady red The object is active Fast blinking red The object is failed Off No subscribe Table 2 Programmable key LEDs for Presence LED Status Description Steady green The object 1s online Slow blinking red The object is ringing Steady red The object is active Fast blinking red The object is
53. failed Off No subscribe Table 3 Programmable key LEDs for line LED Status Description Steady green The account is active Fast Blinking green There is an incoming call to the account Slow Blinking green The call is on hold Slow Blinking red Registration is unsuccessful Off The line is not unapplied or idle Table 4 Programmable key LEDs for MWI LED Status Description Blinking green There are new voice mails Off There is no new voice mail Table 5 Power Indication LED LED Status Description Steady red Power on Fast Blinking red There is an incoming call Off Power off 2 Initial connecting and Settings 2 1 Connect the phone 2 1 1 Connect to network Step 1 Connect the IP Phone to the corporate IP telephony network Before you connect the phone to the network please check 1f your network can work normally You can do this in one of two ways depending on how your workspace 1s set up Direct network connection by this method you need at least one available Ethernet port in your workspace Use the Ethernet cable in the package to connect WAN port on the back of your phone to the Ethernet port in your workspace Since this VoIP Phone has router functionality whether you have a broadband router or not you can make direct network connect The following two figures are for your reference A o Internet lt ADSL C Modem e o Internet lt Shared network connection Use this method
54. ffix optional key 2 the number after receive oan all will be sent out 33334444 Phone Number Destination optional Port optional Aliasfoptional add 0755 Call Mode SIP v Suffix optional Delete Length optional Phone Mumber Destination optional Port optional Alias optional rep 0086 Call Mode SIP v Suffixfoptional Delete Length optional 3 Phone Number Destination optional Portfoptional Aliasfoptional Call Mode Suffix optional Delete Length optional 8 3 4 PHONE 8 3 4 1 AUDIO The phone will automatically send out alias number adding your dialed number if your dialed number starts with your set phone number You need set Phone Number Alias and Delete Length Phone number is XXXT and Alias is rep XXX If your dialed phone number starts with your set phone number the first digits same as your set phone number will be replaced by the alias number specified and New phone number will be send out If your dialed phone number starts with your set phone number The phone will send out your dialed phone number adding suffix number When you dial 8309 the SIP 1 server will receive 07558309 When you dial 0106228 the SIP1 server will receive 86106228 When you dial 147 the SIP1 server will receive 1470011 In this page you can configure voice codec input output volume and so on WEB DIAL Audio Settings
55. fy the No Answer Forward Delay Time if the Forward Type is No answer incoming calls will be forwarded after the no answer forward wait time Specify Hot Line by selecting it Specify Hot Line Number the phone dial the hot line number automatically at hands free mode or handset mode after warm line time Specify the Warm Line Time For the phone supports the transfer of certain special features server set interval time between sending bye and hanging up after the phone transfers a call The registered server will be gotten subscription package from ordinary application of BLF phone please enter the BLFserver when the sever dose not support subscription package then the registered server and subscription server will be separate Enable Disable SIP Encryption Set the key for sip encryption Enable Disable RTP encryption Set the key for RTP encryption Enable Auto Answer by selecting it Specify Auto Answer Time the phone auto answers the incoming call after Auto Answer Time Set Enable Disable Session Timer whether support RFC4028 It will refresh the SIP sessions Set the session timeout Subscribe for MWI MWI Number Subscribe Period s Conference Type Conference Number Registration Expire s Enable Service Code DND On Code DND Off Code Always CFwd On Code Always CFwd Off Code Enable the Subscribe for MWI by selecting it the phone will send subscribe message for MWI to the SIP Server
56. hone number but you can also dial number instead of 010 after we make a setting according to this dial rule For example you want to dial 01062213123 but you need dial only 162213123 to realize your long distance call after you make this setting Dial Peer Table Number Destination Port Mode Alias Suffix Del Length LT 0 0 0 0 5060 SIP rep 010 no suffis 1 To save the memory and avoid abundant input of user add the follow functions Dial Peer Table Number Destination Port Mode Alias Suffix Deleted Length LIXXXXXXXXX 0 0 0 0 5060 SIP add 0 no suffix 0 13 5 9 xxxxxXXKX 0 0 0 0 5060 SIP add 0 no suffix 0 1 Match any single digit that is dialed If user makes the above configuration after user dials 11 digit numbers started with 13 the phone will send out O plus the dialed numbers automatically 2 Specifies a range that will match digit It may be a range a list of ranges separated by commas or a list of digits If user makes the above configuration after user dials 11 digit numbers started with from 135 to 139 the phone will send out O plus the dialed numbers automatically Use this phone you can realize dialing out via different lines without switch in web interface Dial Peer Table Number L3XXXXXXXXX 13 5 9 xxxxXXKKX 156 ap Add Dial Peer Phone Number Destination Optional Port Optional Alias Optional Call Mode Suffix Optional Deleted Length Optional Dial Peer Option 13xxxXXXXXXX v
57. if you have a single Ethernet port in your workspace with your desktop computer already connected to 1t First disconnect the Ethernet cable from the computer and attach it to the WAN port on the back of your phone Next use the Ethernet cable in the package to connect LAN port on the back of your phone to your desktop computer Your IP Phone now shares a network connection with your computer The following figure is for your reference ADSL C Modem Internet gt lt ADSL Cable Broadband Modem Router C01 Step 2 Connect the handset to the handset port by the handset cable in the package Step 3 connect the power supply plug to the AC 5V adapter port on the back of the phone Use the power cable to connect the power supply to a standard power outlet in your workspace Step 4 push the on off switch on the back of the phone to the one side then the phone s LCD screen displays Initializing wait logon Later a ready screen typically displays the date time If your LCD screen displays different information from the above you need refer to the next section Initial setting to set your network online mode If your VoIP phone registers into corporate IP telephony Server your phone is ready to use 2 1 2 Power adaptor connection Make sure that the power you use is comply with the parameters of power adaptor 1 Plug power adaptor to power socket 2 Plug power adaptor s DC output to the DC5V port of C
58. ing configuration Show CPE Serial Number Specify FTP HTTP HTTPS server Username System will use anonymous if username keep blank Specify FTP HTTP HTTPS server Password Input the Encrypt Key if the configuration file 1s encrypted Common Config Encrypt Key Save Autoprovision Information DHCP Option Setting DHCP Option Setting Custom DHCP Option Plug and Play Enable PnP PnP Server PnP Port PnP Transport PnP Interval Phone Flash Server Address Config File Name Protocol Type Update Interval Update Mode TR069 Settings Enable TRO69 ACS Server Type ACS Server URL ACS User Input the Common Encrypt Key if the Common Configuration file is encrypted Save the username and password authentication message of http https ftp and input ID message in the phone until the url in the server changes Specify DHCP Option DHCP option supports DHCP custom option and DHCP option 66 and DHCP option 43 to obtain the parameters You could choose one method among them the default is DHCP option disable A valid Custom DHCP Option is from 128 to 254 The Custom DHCP Option must be in accordance with the one defined in the DHCP server Enable PnP by selecting it than the phone will send SIP SUBSCRIBE messages to a multicast address when it boots up Any SIP server understanding that message will reply with a SIP NOTIFY message containing the Auto Provisioning Server URL where the phones can request their configur
59. ing the prefix of phone number and number length of dialing In order to keep some users secondary dialing manner when dialing the external line with PBX phone can be added a special rule to realize 1t so user can dial a number as external line prefix and get the secondary dial tone to keep dial the external number After finishing dialing phone will send the prefix and external number totally to the server For example there is a rule 9 xxxxxxxx in the digital map table After dialing 9 phone will send the secondary dial tone user may keep going dialing After finished phone will call the number which starts with 9 actually the number sent out is 9 digit with 9 AUDIO FEATURE DIAL PLAN CONTACT REMOTE CONTAC WEB DIAL Basic Settings Press to Send d Dial Fixed Length to Send Send after second s 3 30 Press to Do Blind Transfer E Blind Transfer on Onhook L Attended Transfer on Onhook Dial Plan Table Plans E zda DIAL PLAN Configuration Field name explanation Basic Setting Press to Send Set Enable Disable the phone ended with dial Dial Fixed Length Specify the Fixed Length of phone ending with Send after 3 30 Set the timeout of the last dial digit The call will be sent after timeout seconds Press to Do Blind Enable Blind Transfer On Hook when executing Blind Transfer Transfer End with press after inputting the number that you want to transfer the phone will transfer the curre
60. ings gt Enter 2 You can set Contrast Contrast Calibration and Backlight press Enter and use the navigation keys to set then press the key Save 6 3 Ring Settings 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Ring Settings gt Enter 2 You can set Ring Volume and Ring Type press Enter and use the navigation keys to set then press the key Save In the Ring Type the default system rings have nine and the custom ringtones have three that can be set through the web page 6 4 Voice Volume 1 Press Menu gt Settings gt Enter gt Basic Setting gt Enter gt Voice Volume gt Enter 2 Use the navigation keys to turn down or turn up the voice volume then press the key Save 6 5 Time amp Date 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Time amp Date gt Enter 2 You have two options to choose Auto and Manual use the navigation keys to choose then press Save 6 6 Greeting Words 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Greeting Words gt Enter 2 You can enter the message and press Save 1t will display in the phone screen when the phone start up 6 7 Language 1 Press Menu gt Settings gt Enter gt Basic Settings gt Enter gt Language gt Enter 2 C01 support three languages you can use the navigation keys to choose The default two languages are English and Chinese 7 COl s advanced settings 7 1 Accounts P
61. ived or the phone won t response to the invite sip message Notice the deployment will become effective in all sip lines Enable Group by selecting it then the phone enable the sip group backup function Notice the deployment will become effective in all sip lines Specify the registration failure retry time if the phone register failed the phone will register again after registration failure retry time Notice the deployment will become effective in all sip lines 8 3 3 2 IAX2 TAX Status Unapplied Server Address Server Port 4509 Account Password Phone Number Local Port 4569 Voice Mail Number Voice Mail Text mall Echo Test Number Echo Test Text IM Refresh Time second s Enable Registration F Enable G 7294B F Apply IA X2 Config Field name explanation Status Shows if the phone has been registered the AX2 server or not Server Address Input your IA X2 server address Server Port Set your IAX2 server port the default is 4569 Account Input your IAX2 register account name Password Input your IAX2 register password Phone Number Input your assigned phone number usually it is same you re your IAX2 account name Local Port Set your local sport the default is 4569 Voice Mail Specify the voice mail s number Number Voice Mail Text Specify the voice mail s name Set echo test number If IAX2 server supports echo test Echo Test and echo test number 1s non numeric system could set N
62. k Layer Discovery Protocol LLDP Settings Enable LLDP d Packet Interval 1 3600 second s Enable Learning Function F Quality of Service QoS Settings Enable DSCP O SIP DSCP 0 63 Audio RTP DSCP 0 63 WAN Port VLAN Settings Enable WAN Port VLAN O WAN Port VLAN ID 0 4095 SIP 802 1P Priority o 0 7 Audio 802 1P Priority o 0 7 LAN Port VLAN Settings LAN Port VLAN Mode LAN Port VLAN ID 0 4095 Apply QoS Configuration Link Layer Discovery Protocol LLDP Settings Enable LLDP Enable LLDP by selecting it After enabling LLDP Learn telephone can Enable Learning automatically learn the data of DSCP 802 1p VLAN Function ID from the switch If the data is different from the data of the LLDP server telephone will change its own value as the value of the switch Synchronous with VLAN in switch Package The time interval of sending LLDP Packet Interval 1 3600 Quality of Service Qos Settings Enable DSCP SIP DSCP Audio RTP DSCP WAN Port VLAN Settings Enable WAN Port VLAN WAN Port VLAN ID SIP 802 1p Priority Audio 802 1p Priority LAN Port VLAN Settings LAN Port VLAN Mode LAN Port VLAN ID Enable DSCP by selecting it Specify the value of the SIP DSCP Specify the value of the Audio RTP DSCP Enable WAN Port VLAN by selecting it Specify the value of the WAN Port VLAN ID the range of the value is 0 4095 Specify the value of the sip 8021 p priority the range of the value is 0 7
63. l Anonymous call Edition Keep Authentication Answer With A Single Codec Auto TCP Enable Strict Proxy Enable GRUU Enable Display name Select DTMF sending mode there are three modes O DTMF_RELAY Oo DTMF_RFC2833 Oo DTMF_SIP_INFO Different VoIP Service providers may provide different modes Set sip port of each line Set ring type of each line Enable Disable system to support RFC3581 Via rport is special way to realize SIP NAT Enable or disable SIP PRACK function suggest use the default config Set more parameters in contact field connection with SEM server Convert to 23 when send the URI Set call out by proxy without registration Set to ban Anonymous Call Support DNS looking up with _sip udp mode Select the special type of server which is encrypted or has some unique requirements or call flows Select SIP protocol version to adapt for the SIP server which uses the same version as you select For example if the server is CISCO5300 you need to change to RFC2543 else phone may not cancel call normally System uses RFC3261 as default Set transport protocols TCP or UDP Set Anonymous call out safely Support RFC3323and RFC3325 Enable Disable Keep Authentication System will take the last authentication field which 1s passed the authentication by server to the request packet It will decrease the server s repeat authorization work if it is enable Enable Disable the function when call is inc
64. ll configuration parameters while user with general level can set all configuration parameters except SIP 1 2 or IAX2 s that some parameters cannot be changed such as server address and port User will has different access level with different username and password O Default user with general level Username guest Password guest O Default user with root level Username admin Password admin The default password of phone screen menu is 123 8 2 Setting via web browser When this phone and PC are connected to network enter the IP address of the wan port in this phone as the URL e g http Kxx xxx xxx xxx or http KxxX XXX XXX XXX XXXX If you do not know the IP address you can look it up on the phone s display by pressing Status button The login page is as below picture After you configure the IP phone you need click save button in config under Maintenance in the left catalog to save your configuration Otherwise the phone will lose your modification after power off and on 8 3 Configuration via WEB 8 3 1 BASIC 8 3 1 1 STATUS STATUS WIZARD CALL LOG LANGUAGE Network WAN LAN Connection Mode DHCP IP Address 192 169 10 1 MAC Address 00 01 04 05 0b 49 DHCP Service Enabled IP Address 192 168 3 59 Bridge Mode Enabled IP Gateway 192 168 1 1 Accounts SIP Line 1 4217 192 168 1 2 5060 Registered SIP Line 2 8217 192 168 1 3 5060 Registered SIP Line 3 4217 192 168 1 4 5060 Registered TAX 4569 Unap
65. n Failed PT Off Hook PT On Hook PT Incoming Call PT Outgoing Call PT Call Established PT Call Terminated PT DND Enabled PT DND Disabled PT Always Forward Enabled A Always Forward Disabled AA Busy Forward Enabled PT Busy Forward Disabled PT No Ans Forward Enabled PT No Ans Forward Disabled PT Transfer Call PT Blind Transfer Call PT Attended Transfer Call PT Hold PT Resume PT Mute Doo Unmute PT Missed Call PT IP Changed Pd Idle To Busy PT Busy To Idle Pd Block Out Settings Block Out Add FEATURE Field name explanation Do Not Select DND the phone will reject any incoming call the callers Disturb will be reminded by busy but any outgoing call from the phone will work well Ban If you select Ban Outgoing to enable it and you cannot dial out Outgoing any number Enable Call Enable Call Transfer by selecting it Transfer Semi Attend Enable Semi Attended Transfer by selecting it ed Transfer Enable Auto Enable Auto Redial by selecting it then the phone reminds Redial Auto Redial interval Auto Redial Times Auto Headset Enable Call Completion Enable Pre Dial Enable Call Waiting Enable Call Waiting Tone Enable 3 way Conference Accept Any Call Enable Auto Hand down Auto Hand down Time Ring From Headset Enable Intercom Enable Intercom Mute Enable Intercom Tone Enable Intercom Barge Enable Silent whether redial when the caller 1s busy or rejects Specify the Auto Redial interval
66. ng 1 Press Menu gt Features gt Enter gt Call Waiting gt Enter 2 Use the navigation keys to active or inactive call waiting 3 Then press the Save to save the changes 3 Mute Press Mute button during the conversation icon W will be showed in the LCD Then you could hear the other side conversation yet the other side could not hear you Press 1t again to get the phone to normal conversation 3 8 Call transfer 1 Blind Transfer During talk press the key Transf and then dial the number that you want to transfer to and finished by Phone will transfer the current call to the third party After finishing transfer the call you talk to will be hanged up User cannot select SIP line when phone transfers call 2 Attended Transfer During talk press the key Transf then input the number that you want to transfer to and press Send After that third party answers then press Transfer to complete the transfer You need enable call waiting and call transfer first If there are two calls you can just talk to one and keep hold to the other one The one who is keep hold cannot speak to you or hear from you In other way if user wants to invite the third party during the call they can press Conf to make calls mode in conference mode If user wants to stop conference user can press Split User must enable call waiting and three way call first Note the server that user uses must support RFC3515 or it might not be used 3 Al
67. nt call to the third party Blind Transfer on Enable Blind Transfer on On Hook when executing OnHook Blind Transfer hang up after inputting the number that you want to transfer the phone will transfer the current call to the third party Attend Transfer on Enable Attend Transfer on On Hook when executing OnHook Attended Transfer hang up after the third party answers the phone will transfer the current call to the third party Dial Plan Table Plans Add Lis Below is user defined digital map rule _ Specifies a range that will match digit May be a range a list of ranges _ separated by commas or a list of digits Match any single digit that is dialed Match any arbitrary number of digits including none Tn Indicates an additional time out period before digits are sent of n seconds in length n is mandatory and can have a value of O to 9 seconds Tn must be the last 2 characters of a dial plan If Tn 1s not specified it is assumed to be TO by default on all dial plans RULE 1 8 xxx 99T4 9911x T4 Cause extensions 1000 8999 to be dialed immediately Cause 8 digit numbers started with 9 to be dialed immediately Cause 911 to be dialed immediately after it is entered Cause 99 to be dialed after 4 seconds Cause any number started with 9911 to be dialed 4 seconds after dialing ceases Notice End with Fixed Length Time out and Digital Map Table can be used simultaneously System will stop
68. number for example 123456 or 1234xx Black List 4119 Means any incoming number is forbidden except for 4119 Note End with DOT when set up the white list 8 3 4 5 REMOTE CONTACT AUDIO FEATURE DIAL PLAN CONTACT WEB DIAL Remote Phonebook Settings e Phonebook Name Server URL SIP Line Authentication User Password 1 i Default v Default 2 3 Default v 4 Default Apply You need to match a XML Phonebook address and you can directly access to the corresponding remote phonebook on the phone For example Set the Phonebook Name as fanvil Server URL 1s tftp 192 168 1 3 admin phonebook index xml Or Set the Phonebook Name as Idap Server URL is Idap 192 168 1 3 dc winline dc com Remote Phonebook Setting Phonebook Name Custom the phonebook name displayed on the phone Server URL Specify the server url of the remote phonebook SIP Line Specify the sip line for the remote phonebook Authentication Specify the authentication mode for remote phonebook User password Input the authentication username and password 8 3 4 6 WEB DIAL REMOTE CONTAC WEB DIAL AUDIO FEATURE Web Dial Settings Dial Number Line Selection DIAL PLAN IN Dia J _Hungup You can make a call through the WEB DIAL enter the Dial Number then press Dial if you want to finish the talk press Hang up 8 3 5 FUNCTION KEY 8 3 5 1 FUNCTION
69. oming phone replies SIP message with just one codec which phone supports Set to use automatically TCP protocol to guarantee usability of transport as message is above 1300 byte Support the special SIP server when phone receives the packets sent from server phone will use the source IP address not the address in via field Set to support GRUU Set to make quotation mark to display name as the Quote Enable user phone Enable Missed Call Log Click to talk Enable BLF List BLF List Number SIP Global Settings Strict Branch Enable Group Registration Failure Retry Time phone sends out signal in order to be compatible with server Enable user phone by selecting it it is contained in the invite sip message in order to be compatible with server Enable the missed call log by it the phone will save the missed call log into the call history record and display the missed calls on the idle screen or won t save the missed call log into the call history record and display the missed calls on the idle screen Set click to Talk need practical software support Enable BLF List by selecting it BLF list is a function which can monitor the group status it is not one to one monitoring but the information feedback from the server to decide which BLF list will monitor Specify the BLF List Number Enable the Strict Branch the value of the branch must be in the beginning of z9hG4k in via field of the invite sip message rece
70. plied Status Field name Explanation Network Shows the configuration information on WAN and LAN port including the connect mode of WAN port Static DHCP PPPoE MAC address the IP address of WAN port and LAN port ON or OFF of DHCP mode of LAN port and bridge mod Accounts Shows the phone numbers provided by the SIP LINE 1 2 servers and IAX2 The last line shows the version number and issued date 8 3 1 2 WIZARD WIZARD CALL LOG LANGUAGE WAN Connection Mode Static IP DHCP PPPoE 000 Next Wizard Please select the proper network mode according to the network condition E58 E58P provide three different network settings O Static If your ISP server provides you the static IP address please select this mode and then finish Static Mode setting If you don t know about parameters of Static Mode setting please ask your ISP for them e DHCP In this mode you will get the information from the DHCP server automatically need not to input this information artificially PPPoE In this mode you must input your ADSL account and password Y ou can also refer to2 2 1 Network setting to speed setting your network Choose Static IP MODE click NEXT can config the network and SIP default SIP1 simply also can browse too Click BACK and return to the last page Static IP Settings IP Address Subnet Mask 255 255 255 0 IP Gateway DNS Domain OoOo O O Primary DNS 202 960 134 133 Secondary DNS IP
71. ranet and make internal network security more effectively these equipment open to extranet need be separated from the other equipment not open to extranet by the corresponding isolation method according to different demands We can provide the different security level protection in terms of the different resources by building a DMZ region which can provide the network level protection for the equipment environment reduce the risk which 1s caused by providing service to distrust customer and is the best position to put public information The following chart describes the network access control of DMZ Inner Network area WEB FILTER FIREWALL SECURITY Application Layer Gateway ALG Settings IPSec ALG FTP ALG PPTP ALG Apply Network Address Translation NAT Table Inside IP Address Inside TCP Port Outside TCP Port Inside IP Address Inside UDP Port Outside UDP Port NAT Table Option Transfer Type Outside Port ay Inside IP Address inside Port A Add DMZ Settings NAT Configuration Field name explanation IPSec ALG It is an encryption technology Select it to enable IPSec ALG the default is enabled FTP is a service of connection layer which can FTP ALG transform intranet IP into extranet IP when intranet IP is sending out packet Select it to enable FTP ALG the default is enabled PPTP ALG Select 1t enable PPTP ALG the default 1s enabled Shows the NAT TCP mapping table Shows the NAT UDP mapping table Tran
72. re is no Set it means to disable dialing IP Specify the server IP that remote control phone for corresponding operation Specify the Action URL that Record the operation of phone send this corresponding information to server url http InternalServer FileName xml Internal Server is server IP Filename is name of xml that contains the action message Set Add Delete Limit List Please input the prefix of those phone numbers which you forbid the phone to dial out For example if you want to forbid those phones of 001 as prefix to be dialed out you need input 001 in the blank of limit list and Block out then you cannot dial out any phone number whose prefix 1s 001 X and are wildcard x means matching any single digit For example 4xxx expresses any number with prefix 4 which length is 4 will be forbidden to dialed out means matching any arbitrary number digit For example 6 expresses any number with prefix 6 will be forbidden to dialed out Notice Black List and Limit List can record at most10 items respectively 8 3 4 3 DIAL PLAN This system supports 4 dial modes 1 End with dial your desired number and then press 2 Fixed Length the phone will intersect the number according to your specified length 3 Time Out After you stop dialing and waiting time out system will send the number collected 4 User defined you can customize digital map rules to make dialing more flexible It 1s realized by defin
73. ress Menu gt Enter gt Advanced settings and then input the password to enter the interface the default password 1s 123 You can set it through the web page Then choose Account then press Enter you can do some sip settings 7 2 Network Press Menu gt Enter gt Advanced settings and then input the password to enter the interface Then choose Network and press Enter you can do network settings you can refer to 2 2 1 Network settings 7 3 Security Press Menu gt Enter gt Advanced settings and then input the password to enter the interface Then choose Security you can configure Menu Password Key lock Password Key lock Status and whether to ban Outgoing 7 4 Maintenance Press Menu gt Enter gt Advanced settings and then input the password to enter the interface Then choose Maintenance and press Enter you can configure Auto Provision Backup and Upgrade 7 5 Factory Reset Press Menu gt Enter gt Advanced settings and then input the password to enter the interface Then choose Factory Reset and press Enter you can choose Yes or No 8 Web configuration 8 1 Introduction of configuration 8 1 1 Ways to configure There are three different configurations with C60 for different users Use phone keypad O Use web browser recommendatory way O Use telnet with CLI command 8 1 2 Password Configuration There are two levels to access to phone root level and general level User with root level can browse and set a
74. rnate between Headset Handset and Speaker phone by pressing the corresponding buttons or picking up the handset 3 3 DND Press DND softkey to active DND Mode Further incoming calls will be rejected and the display shows EHO icon Press DND softkey twice to deactivate DND mode You can find the incoming call record in the Call History 3 4 Call Forward This feature allows you to forward an incoming call to another phone number The display showed C icon The following call forwarding events can be configured Off Call forwarding is deactivated by default Always Incoming calls are immediately forwarded Busy Incoming calls are immediately forwarded when the phone 1s busy No Answer Incoming calls are forwarded when the phone is not answered after a specific period To configure Call Forward via Phone interface 1 Press Menu gt Features gt Enter gt Call Forwarding gt Enter 2 There are 4 options Disabled Always Busy and No Answer 3 If you choose one of them except Disabled enter the phone number you want to forward your call to Press Save to save the changes 3 5 Call Hold 1 Press the Hold button or Hold softkey to put your active call on hold 2 If there is only one call on hold press the hold softkey to retrieve the call 3 If there are more than one call on hold press the line button and the Up Down button to highlight the call then press the Unhold button to retrieve the call 3 6 Call Waiti
75. ses DHCP client to get IP in startup If system uses DHCP client to get IP in running status and network ID 1s also same as LAN s system will refuse to accept the IP to configure WAN So WAN s active IP will be 0 0 0 0 8 3 2 2 LAN QoS8WLAN SERVICE PORT DHCP SERVICE TIME amp DATE LAN Settings ip IP Address Subnet Mask DHCP Service NAT Port Mirror Only works in the bridge mode Enable Bridge Mode LAN Config Field name explanation IP Address Specify LAN static IP Subnet Mask Specify LAN Netmask Select the DHCP server of LAN port or not After you DHCP Service modify the LAN IP address phone will amend and adjust the DHCP Lease Table and save the result amended automatically according to the IP address and Netmask You need reboot the phone and the DHCP server setting will take effect NAT Select NAT or not Port Mirror Select Port Mirror or not it only works in bridge mode the function of the port mirror is that copy the data stream from the WAN port to the LAN port of the phone Select Bridge Mode or not If you select Bridge Mode Enable Bridge the phone will no longer set IP address for LAN Mode physical port LAN and WAN will join in the same network Click Apply the phone will reboot Notice When LAN IP or bridge mode status is changed the system will reboot If you choose the bridge mode the LAN configuration will be disabled 8 3 2 3 QoS amp VLAN The VOIP phone support 802 1Q
76. sfer Type Select the NAT mapping protocol style TCP or UDP Inside IP Set the IP address of device which is connected to LAN interface to do NAT mapping Inside Port Set the LAN port of the NAT mapping Outside Port Set the WAN port of the NAT mapping Notice After finish setting click the Add button to add new mapping table click the Delete button to delete the selected mapping table Shows the outside WAN port IP address and the inside LAN port IP address Notice 10M 100M adaptive means the network card and other equipment physical consultations speed testing speed under bridge mode near to 100M in order to ensure the quality of voice and communications real time performance we made some sacrifices of NAT under the transmission performance Transmit with full capability only when system is idle so cannot guarantee that the transmission speed reach to 100M 8 3 7 4 VPN This web page provides us a safe connect mode by which we can make remote access to enterprise inner network from public network That is to say you can set 1t to connect public networks in different areas into inner network via a special tunnel E Fhysical Network y Urdiz stialing Virtual Private Network VPN Status IP Address 0 0 0 0 VPN Mode Enable VPN C L2TP OpenVPN Layer 2 Tunneling Protocol L2TP VPN Server Address VPN User gt gt gt VPN Password E Apply Field name VPN IP VPN Configuration
77. status If the screen shows Negotiating it shows that the phone is trying to access to the PPPoE Server if it shows an IP address then the phone has already get IP with PPPoE Setting Static IP mode static ADSL Cable or no PPPoE DHCP network 1 Prepare the network s parameters first such as IP Address Net mask Default Gateway and DNS server IP address If you don t know this information please contact the service provider or technician of network 2 Press Menu gt Settings gt Advanced Settings then enter passwords and choose network gt WAN settings gt Connection Mode enter and choose Static through navigation keys and press the Save key 3 Press Back then choose Static Set press Enter 4 The screen will show the current information and then press Del to delete Input your IP address Mask Gateway DNS and press Save to save what you input 5 Press Back six times to return to the idle screen 6 Check the status the screen shows Static the screen shows the IP address and gateway which were set just now if the phone could display the right time it shows that Static IP mode takes effect Setting DHCP mode 1 Press Menu gt Settings gt Advanced Settings then enter passwords and choose network gt WAN settings gt Connection Mode enter and choose DHCP through navigation keys and press the Save key 2 Press Back six times to return to the idle screen 3 Check the status the screen shows D
78. tion Web Update Click the browse button find out the config file saved Web Update before or provided by manufacturer download it to the phone directly press Update to save You can also update downloaded file logo picture ring mmiset file by web TFTP FTP Update Server Address Set the FTP TFTP server address for download upload The address can be IP address or Domain name with subdirectory User Set the FTP server Username for download upload Password Set the FTP server password for download upload File name Set the name of update file or config file The default name 1s the MAC of the phone such as 000102030405 Notice You can modify the exported config file And you can also download config file which includes several modules that need to be imported For example you can download a config file just keep with SIP module After reboot other modules of system still use previous setting and are not lost Type Action type that system want to execute 1 Application update download system update file 2 Config file export Upload the config file to FTP TFTP server name and save it 3 Config fie import Download the config file to phone from FTP TFTP server The configuration will be effective after the phone is reset 4 Phone book export vcf Upload the phonebook file to FTP TFTP server name and save it 5 PhoneBook import vcf Download the phonebook file to phone from FTP TFTP server Protocol Select FTP
79. umber an echo test number to replace the echo test text So user can dial the numeric number to test echo voice test This function is provided with server to make endpoint to test whether endpoint could talk through server normally Echo Test Text Specify echo test text s name Refresh Time Set expire time of AX2 server register you can set it between 60 and 3600 seconds Enable Start to register the A X2 server or not by selecting it or Registration not Enable G 729AB Enable or disable code G 729 by selecting it or not 8 3 3 3 STUN In this web page you can config SIP STUN STUN By STUN server the phone in private network could know the type of NAT and the NAT mapping IP and port of SIP The phone might register itself to SIP server with global IP and port to realize the device both calling and being called in private network ant to receive data from 5060 Private Network Gateway NAT STUN Server Simple Traversal of UDP through NATs STUN Settings STUN NAT Traversal Server Address server Port Binding Period SIP Waiting Time Local SIP Port SIP Line Using STUN SIP 1 vw Use STUN Field name Simple Traversal of UDP through NATs STUN Settings STUN NAT Traversal Server Address Server Port Blinding Period s SIP Waiting Time FALSE 3478 second s millisecond s 5060 Apply L Apply STUN explanation Shows STUN NAT Transverse estimation true means STUN can penetrate NAT
80. while False means not Set your SIP STUN Server IP address Set your SIP STUN Server Port Set STUN blinding period s If NAT server finds that a NAT mapping is idle after time out 1t will release the mapping and the system need send a STUN packet to keep the mapping effective and alive Specify the sip wait stun time you can input the time depended on your network condition e USE SEUN Configure the local SIP port default port is 5060 the port with immediate effect after revision SIP calls will use the modified port SIP Line Using STUN Use STUN F Apply Choose line to set info about SIP There are 2 lines to choose You can switch by Load button Use STUN Enable Disable SIP STUN Notice SIP STUN is used to realize SIP penetration to NAT If your phone configures STUN Server IP and Port default is 3478 and enable SIP Stun you can use the ordinary SIP Server to realize penetration to NAT 8 3 3 4 DIAL PEER This functionality offers you more flexible dial rule you can refer to the following content to know how to use this dial rule When you want to dial an IP address the entry of IP addresses is very cumbersome but by this functionality you can set number 156 to replace 192 168 1 119 here Dial Peer Table Mumber Destination Port Mode Alias Suttix Del Length 156 192 168 1 119 5060 SIP no allas no suffis o When you want to dial a long distance call to Beijing you need dial an area code 010 before local p
81. with length appointed 4 Rep It means that phone will replace the number with length and number appointed You can refer to the following examples of different alias application to know more how to use different aliases and this dial rule Call Mode Select different signal protocol SIP or TAX2 Suffix Set suffix this is optional config item It will show no suffix if you don t set it Delete Length Set delete length This is optional config item For example if the delete length is 3 the phone will delete the first 3 digits then send out the rest digits You can refer to examples of different alias application to know how to set delete length Examples of different alias application You need set phone number Destination Alias and Delete Length Phone number is XX XT Destination 1s EEN 295 255 255 255 0 0 0 2 neue z o If you dial Destination optional Aaa ls and Alias 1S del y Dae al 93333 the Alias optional o This means any phone Call Mode di SIP2 Server will Suffix optional No that starts with your receive 3333 Delete Length optional set phone number will be sent via SIP2 line after the first several digits of your dialed phone number are deleted according to delete length EURE This setting will realize When you dial peek cane speed dial function after 2 the SIP1 Port optional Ae ee al 33334444 you dialing the numeric server will Call Mode SIP Su
82. y also can browse too Click Back and configure SIP can return to the last page Like Static IP MODE PPPoE Settings Service Name User Password Next Service Name It will be provided by ISP User Input your ADSL account Password Input your ADSL password Notice Click Finish button after finished your setting IP Phone will save the setting automatically and reboot After reboot you can dial by the SIP account 8 3 1 3 CALL LOG You can query all the outgoing through this page Call Information Start Time Duration Dialed Calls Call Log Field name explanation Start Time Display the start time of the outgoing record Duration Display the conversation time of the outgoing record Dialed Calls Display the account protocol line of the outgoing record 8 3 1 4 LANGUAGE WIZARD CALL LOG LANGUAGE Language Language Selection Greeting Words Text Message WOIP PHONE 0 12 character s LANGUAGE Field name explanation Language Set the language of phone English is default The greeting words will display on LCD when phone Greeting Words is idle It can support 12 chars the default chars are VOIP PHONE Notice the maximal length of the greeting message is twelve English characters and five Chinese characters 8 3 2 NETWORK 8 3 2 1 WAN Oo0S5 amp VLAN SERVICE PORT DHCP SERVICE TIME amp DATE WAN Status Active IP Address 192 168 3 59 Current Subnet Mask 255 255 0 0 Current IP Gateway 192 168 1
83. ype FTP Ww Update Interval hour s Update Mode Disabled Ww TRO69 Settings gt gt Enable TRO69 ACS Server Type ACS Server URL ACS User ACS Password TROGS Auto Login Inform Sending Period Common 0 0 0 admin second s Apply Ll Ti o O ir Fanvil endpoint supports PnP and DHCP and Phone Flash to obtain the parameters The PnP and DHCP and Phone Flash are all deployed endpoint will go by the following process to try to obtain the server address and other parameters when it boots up DHCP option gt PnP server gt Phone Flash Field name Auto Update Setting Current Config Version Common Config Version CPE Serial Number User Password Config Encrypt Key Auto Provision explanation Show the current config file s version If the version of the configuration downloaded is higher than the version of the running configurations the auto provision would upgrade or stop here If the endpoints confirm the configuration by Digest method the endpoints wouldn t upgrade configuration unless the configuration in the server is different with the running configuration Show the common config file s version If the configuration downloaded and the running configurations are the same the auto provision would stop here If the endpoints confirm the configuration by Digest method the endpoints wouldn t upgrade configuration unless the configuration in the server is different with the runn

Download Pdf Manuals

image

Related Search

Related Contents

La Mise en oeuvre de politique pour une - unesdoc  Samsung LD190N User Manual  LIFE ON THE ROAD - Frugal RV Travel  Yamaha MM8 User's Manual  Wrapping Test System for CNH Round Balers  930583RevD Freestyle.qxd  Instruction Manual Bedienungsanleitung Manuel d`utilisation    Panasonic WV-SW352 surveillance camera  取扱説明書 - フジ医療器  

Copyright © All rights reserved.
Failed to retrieve file